pmbus.hpp - openbmc/phosphor-power - Gitiles

 #pragma once

 #include <experimental/filesystem>
 #include <string>
 #include <vector>

 namespace witherspoon
 {
 namespace pmbus
 {

 namespace fs = std::experimental::filesystem;

 // The file name Linux uses to capture the STATUS_WORD from pmbus.
 constexpr auto STATUS_WORD = "status0";

 // The file name Linux uses to capture the STATUS_INPUT from pmbus.
 constexpr auto STATUS_INPUT = "status0_input";

 // Voltage out status.
 // Overvoltage fault or warning, Undervoltage fault or warning, maximum or
 // minimum warning, ....
 // Uses Page substitution
 constexpr auto STATUS_VOUT = "statusP_vout";

 namespace status_vout
 {
 // Mask of bits that are only warnings
 constexpr auto WARNING_MASK = 0x6A;
 }

 // Current output status bits.
 constexpr auto STATUS_IOUT = "status0_iout";

 // Manufacturing specific status bits
 constexpr auto STATUS_MFR = "status0_mfr";

 // Reports on the status of any fans installed in position 1 and 2.
 constexpr auto STATUS_FANS_1_2 = "status0_fans12";

 // Reports on temperature faults or warnings. Overtemperature fault,
 // overtemperature warning, undertemperature warning, undertemperature fault.
 constexpr auto STATUS_TEMPERATURE = "status0_temp";

 namespace status_word
 {
 constexpr auto VOUT_FAULT = 0x8000;

 // The IBM CFF power supply driver does map this bit to power1_alarm in the
 // hwmon space, but since the other bits that need to be checked do not have
 // a similar mapping, the code will just read STATUS_WORD and use bit masking
 // to see if the INPUT FAULT OR WARNING bit is on.
 constexpr auto INPUT_FAULT_WARN = 0x2000;

 // The bit mask representing the POWER_GOOD Negated bit of the STATUS_WORD.
 constexpr auto POWER_GOOD_NEGATED = 0x0800;

 // The bit mask representing the FAN FAULT or WARNING bit of the STATUS_WORD.
 // Bit 2 of the high byte of STATUS_WORD.
 constexpr auto FAN_FAULT = 0x0400;

 // The bit mask representing the UNITI_IS_OFF bit of the STATUS_WORD.
 constexpr auto UNIT_IS_OFF = 0x0040;

 // Bit 5 of the STATUS_BYTE, or lower byte of STATUS_WORD is used to indicate
 // an output overvoltage fault.
 constexpr auto VOUT_OV_FAULT = 0x0020;

 // The bit mask representing that an output overcurrent fault has occurred.
 constexpr auto IOUT_OC_FAULT = 0x0010;

 // The IBM CFF power supply driver does map this bit to in1_alarm, however,
 // since a number of the other bits are not mapped that way for STATUS_WORD,
 // this code will just read the entire STATUS_WORD and use bit masking to find
 // out if that fault is on.
 constexpr auto VIN_UV_FAULT = 0x0008;

 // The bit mask representing the TEMPERATURE FAULT or WARNING bit of the
 // STATUS_WORD. Bit 2 of the low byte (STATUS_BYTE).
 constexpr auto TEMPERATURE_FAULT_WARN = 0x0004;

 }

 namespace status_temperature
 {
 // Overtemperature Fault
 constexpr auto OT_FAULT = 0x80;
 }

 /**
  * Where the access should be done
  */
 enum class Type
 {
     Base,             // base device directory
     Hwmon,            // hwmon directory
     Debug,            // pmbus debug directory
     DeviceDebug,      // device debug directory
     HwmonDeviceDebug  // hwmon device debug directory
 };

 /**
  * @class PMBus
  *
  * This class is an interface to communicating with PMBus devices
  * by reading and writing sysfs files.
  *
  * Based on the Type parameter, the accesses can either be done
  * in the base device directory (the one passed into the constructor),
  * or in the hwmon directory for the device.
  */
 class PMBus
 {
     public:

         PMBus() = delete;
         ~PMBus() = default;
         PMBus(const PMBus&) = default;
         PMBus& operator=(const PMBus&) = default;
         PMBus(PMBus&&) = default;
         PMBus& operator=(PMBus&&) = default;

         /**
          * Constructor
          *
          * @param[in] path - path to the sysfs directory
          */
         PMBus(const std::string& path) :
             basePath(path)
         {
             findHwmonDir();
         }

         /**
          * Constructor
          *
          * This version is required when DeviceDebug
          * access will be used.
          *
          * @param[in] path - path to the sysfs directory
          * @param[in] driverName - the device driver name
          * @param[in] instance - chip instance number
          */
         PMBus(const std::string& path,
               const std::string& driverName,
               size_t instance) :
             basePath(path),
             driverName(driverName),
             instance(instance)
         {
             findHwmonDir();
         }

         /**
          * Reads a file in sysfs that represents a single bit,
          * therefore doing a PMBus read.
          *
          * @param[in] name - path concatenated to
          *                   basePath to read
          * @param[in] type - Path type
          *
          * @return bool - false if result was 0, else true
          */
         bool readBit(const std::string& name, Type type);

         /**
          * Reads a file in sysfs that represents a single bit,
          * where the page number passed in is substituted
          * into the name in place of the 'P' character in it.
          *
          * @param[in] name - path concatenated to
          *                   basePath to read
          * @param[in] page - page number
          * @param[in] type - Path type
          *
          * @return bool - false if result was 0, else true
          */
         bool readBitInPage(const std::string& name,
                            size_t page,
                            Type type);
         /**
          * Checks if the file for the given name and type exists.
          *
          * @param[in] name   - path concatenated to basePath to read
          * @param[in] type   - Path type
          *
          * @return bool - True if file exists, false if it does not.
          */
         bool exists(const std::string& name, Type type);

         /**
          * Read byte(s) from file in sysfs.
          *
          * @param[in] name   - path concatenated to basePath to read
          * @param[in] type   - Path type
          *
          * @return uint64_t - Up to 8 bytes of data read from file.
          */
         uint64_t read(const std::string& name, Type type);

         /**
          * Read a string from file in sysfs.
          *
          * @param[in] name   - path concatenated to basePath to read
          * @param[in] type   - Path type
          *
          * @return string - The data read from the file.
          */
         std::string readString(const std::string& name, Type type);

         /**
          * Writes an integer value to the file, therefore doing
          * a PMBus write.
          *
          * @param[in] name - path concatenated to
          *                   basePath to write
          * @param[in] value - the value to write
          * @param[in] type - Path type
          */
         void write(const std::string& name, int value, Type type);

         /**
          * Returns the sysfs base path of this device
          */
         inline const auto& path() const
         {
             return basePath;
         }

         /**
          * Replaces the 'P' in the string passed in with
          * the page number passed in.
          *
          * For example:
          *   insertPageNum("inP_enable", 42)
          *   returns "in42_enable"
          *
          * @param[in] templateName - the name string, with a 'P' in it
          * @param[in] page - the page number to insert where the P was
          *
          * @return string - the new string with the page number in it
          */
         static std::string insertPageNum(const std::string& templateName,
                                          size_t page);

         /**
          * Finds the path relative to basePath to the hwmon directory
          * for the device and stores it in hwmonRelPath.
          */
         void findHwmonDir();

         /**
          * Returns the path to use for the passed in type.
          *
          * @param[in] type - Path type
          *
          * @return fs::path - the full path
          */
         fs::path getPath(Type type);

     private:

         /**
          * Returns the device name
          *
          * This is found in the 'name' file in basePath.
          *
          * @return string - the device name
          */
         std::string getDeviceName();

         /**
          * The sysfs device path
          */
         fs::path basePath;

         /**
          * The directory name under the basePath hwmon directory
          */
         fs::path hwmonDir;

         /**
          * The device driver name.  Used for finding the device
          * debug directory.  Not required if that directory
          * isn't used.
          */
         std::string driverName;

         /**
          * The device instance number.
          *
          * Used in conjuction with the driver name for finding
          * the debug directory.  Not required if that directory
          * isn't used.
          */
         size_t instance = 0;

         /**
          * The pmbus debug path with status files
          */
         const fs::path debugPath = "/sys/kernel/debug/";

 };

 }
 }
	#pragma once

	#include <experimental/filesystem>
	#include <string>
	#include <vector>

	namespace witherspoon
	{
	namespace pmbus
	{

	namespace fs = std::experimental::filesystem;

	// The file name Linux uses to capture the STATUS_WORD from pmbus.
	constexpr auto STATUS_WORD = "status0";

	// The file name Linux uses to capture the STATUS_INPUT from pmbus.
	constexpr auto STATUS_INPUT = "status0_input";

	// Voltage out status.
	// Overvoltage fault or warning, Undervoltage fault or warning, maximum or
	// minimum warning, ....
	// Uses Page substitution
	constexpr auto STATUS_VOUT = "statusP_vout";

	namespace status_vout
	{
	// Mask of bits that are only warnings
	constexpr auto WARNING_MASK = 0x6A;
	}

	// Current output status bits.
	constexpr auto STATUS_IOUT = "status0_iout";

	// Manufacturing specific status bits
	constexpr auto STATUS_MFR = "status0_mfr";

	// Reports on the status of any fans installed in position 1 and 2.
	constexpr auto STATUS_FANS_1_2 = "status0_fans12";

	// Reports on temperature faults or warnings. Overtemperature fault,
	// overtemperature warning, undertemperature warning, undertemperature fault.
	constexpr auto STATUS_TEMPERATURE = "status0_temp";

	namespace status_word
	{
	constexpr auto VOUT_FAULT = 0x8000;

	// The IBM CFF power supply driver does map this bit to power1_alarm in the
	// hwmon space, but since the other bits that need to be checked do not have
	// a similar mapping, the code will just read STATUS_WORD and use bit masking
	// to see if the INPUT FAULT OR WARNING bit is on.
	constexpr auto INPUT_FAULT_WARN = 0x2000;

	// The bit mask representing the POWER_GOOD Negated bit of the STATUS_WORD.
	constexpr auto POWER_GOOD_NEGATED = 0x0800;

	// The bit mask representing the FAN FAULT or WARNING bit of the STATUS_WORD.
	// Bit 2 of the high byte of STATUS_WORD.
	constexpr auto FAN_FAULT = 0x0400;

	// The bit mask representing the UNITI_IS_OFF bit of the STATUS_WORD.
	constexpr auto UNIT_IS_OFF = 0x0040;

	// Bit 5 of the STATUS_BYTE, or lower byte of STATUS_WORD is used to indicate
	// an output overvoltage fault.
	constexpr auto VOUT_OV_FAULT = 0x0020;

	// The bit mask representing that an output overcurrent fault has occurred.
	constexpr auto IOUT_OC_FAULT = 0x0010;

	// The IBM CFF power supply driver does map this bit to in1_alarm, however,
	// since a number of the other bits are not mapped that way for STATUS_WORD,
	// this code will just read the entire STATUS_WORD and use bit masking to find
	// out if that fault is on.
	constexpr auto VIN_UV_FAULT = 0x0008;

	// The bit mask representing the TEMPERATURE FAULT or WARNING bit of the
	// STATUS_WORD. Bit 2 of the low byte (STATUS_BYTE).
	constexpr auto TEMPERATURE_FAULT_WARN = 0x0004;

	}

	namespace status_temperature
	{
	// Overtemperature Fault
	constexpr auto OT_FAULT = 0x80;
	}

	/**
	* Where the access should be done
	*/
	enum class Type
	{
	Base, // base device directory
	Hwmon, // hwmon directory
	Debug, // pmbus debug directory
	DeviceDebug, // device debug directory
	HwmonDeviceDebug // hwmon device debug directory
	};

	/**
	* @class PMBus
	*
	* This class is an interface to communicating with PMBus devices
	* by reading and writing sysfs files.
	*
	* Based on the Type parameter, the accesses can either be done
	* in the base device directory (the one passed into the constructor),
	* or in the hwmon directory for the device.
	*/
	class PMBus
	{
	public:

	PMBus() = delete;
	~PMBus() = default;
	PMBus(const PMBus&) = default;
	PMBus& operator=(const PMBus&) = default;
	PMBus(PMBus&&) = default;
	PMBus& operator=(PMBus&&) = default;

	/**
	* Constructor
	*
	* @param[in] path - path to the sysfs directory
	*/
	PMBus(const std::string& path) :
	basePath(path)
	{
	findHwmonDir();
	}

	/**
	* Constructor
	*
	* This version is required when DeviceDebug
	* access will be used.
	*
	* @param[in] path - path to the sysfs directory
	* @param[in] driverName - the device driver name
	* @param[in] instance - chip instance number
	*/
	PMBus(const std::string& path,
	const std::string& driverName,
	size_t instance) :
	basePath(path),
	driverName(driverName),
	instance(instance)
	{
	findHwmonDir();
	}

	/**
	* Reads a file in sysfs that represents a single bit,
	* therefore doing a PMBus read.
	*
	* @param[in] name - path concatenated to
	* basePath to read
	* @param[in] type - Path type
	*
	* @return bool - false if result was 0, else true
	*/
	bool readBit(const std::string& name, Type type);

	/**
	* Reads a file in sysfs that represents a single bit,
	* where the page number passed in is substituted
	* into the name in place of the 'P' character in it.
	*
	* @param[in] name - path concatenated to
	* basePath to read
	* @param[in] page - page number
	* @param[in] type - Path type
	*
	* @return bool - false if result was 0, else true
	*/
	bool readBitInPage(const std::string& name,
	size_t page,
	Type type);
	/**
	* Checks if the file for the given name and type exists.
	*
	* @param[in] name - path concatenated to basePath to read
	* @param[in] type - Path type
	*
	* @return bool - True if file exists, false if it does not.
	*/
	bool exists(const std::string& name, Type type);

	/**
	* Read byte(s) from file in sysfs.
	*
	* @param[in] name - path concatenated to basePath to read
	* @param[in] type - Path type
	*
	* @return uint64_t - Up to 8 bytes of data read from file.
	*/
	uint64_t read(const std::string& name, Type type);

	/**
	* Read a string from file in sysfs.
	*
	* @param[in] name - path concatenated to basePath to read
	* @param[in] type - Path type
	*
	* @return string - The data read from the file.
	*/
	std::string readString(const std::string& name, Type type);

	/**
	* Writes an integer value to the file, therefore doing
	* a PMBus write.
	*
	* @param[in] name - path concatenated to
	* basePath to write
	* @param[in] value - the value to write
	* @param[in] type - Path type
	*/
	void write(const std::string& name, int value, Type type);

	/**
	* Returns the sysfs base path of this device
	*/
	inline const auto& path() const
	{
	return basePath;
	}

	/**
	* Replaces the 'P' in the string passed in with
	* the page number passed in.
	*
	* For example:
	* insertPageNum("inP_enable", 42)
	* returns "in42_enable"
	*
	* @param[in] templateName - the name string, with a 'P' in it
	* @param[in] page - the page number to insert where the P was
	*
	* @return string - the new string with the page number in it
	*/
	static std::string insertPageNum(const std::string& templateName,
	size_t page);

	/**
	* Finds the path relative to basePath to the hwmon directory
	* for the device and stores it in hwmonRelPath.
	*/
	void findHwmonDir();

	/**
	* Returns the path to use for the passed in type.
	*
	* @param[in] type - Path type
	*
	* @return fs::path - the full path
	*/
	fs::path getPath(Type type);

	private:

	/**
	* Returns the device name
	*
	* This is found in the 'name' file in basePath.
	*
	* @return string - the device name
	*/
	std::string getDeviceName();

	/**
	* The sysfs device path
	*/
	fs::path basePath;

	/**
	* The directory name under the basePath hwmon directory
	*/
	fs::path hwmonDir;

	/**
	* The device driver name. Used for finding the device
	* debug directory. Not required if that directory
	* isn't used.
	*/
	std::string driverName;

	/**
	* The device instance number.
	*
	* Used in conjuction with the driver name for finding
	* the debug directory. Not required if that directory
	* isn't used.
	*/
	size_t instance = 0;

	/**
	* The pmbus debug path with status files
	*/
	const fs::path debugPath = "/sys/kernel/debug/";

	};

	}
	}