power-supply/power_supply.cpp - openbmc/phosphor-power - Gitiles

 /**
  * Copyright © 2017 IBM Corporation
  *
  * Licensed under the Apache License, Version 2.0 (the "License");
  * you may not use this file except in compliance with the License.
  * You may obtain a copy of the License at
  *
  *     http://www.apache.org/licenses/LICENSE-2.0
  *
  * Unless required by applicable law or agreed to in writing, software
  * distributed under the License is distributed on an "AS IS" BASIS,
  * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  * See the License for the specific language governing permissions and
  * limitations under the License.
  */
 #include <phosphor-logging/log.hpp>
 #include <phosphor-logging/elog.hpp>
 #include <xyz/openbmc_project/Sensor/Device/error.hpp>
 #include <xyz/openbmc_project/Control/Device/error.hpp>
 #include <xyz/openbmc_project/Power/Fault/error.hpp>
 #include "elog-errors.hpp"
 #include "names_values.hpp"
 #include "power_supply.hpp"
 #include "pmbus.hpp"
 #include "utility.hpp"

 using namespace phosphor::logging;
 using namespace sdbusplus::xyz::openbmc_project::Control::Device::Error;
 using namespace sdbusplus::xyz::openbmc_project::Sensor::Device::Error;
 using namespace sdbusplus::xyz::openbmc_project::Power::Fault::Error;

 namespace witherspoon
 {
 namespace power
 {
 namespace psu
 {

 constexpr auto INVENTORY_OBJ_PATH = "/xyz/openbmc_project/inventory";
 constexpr auto INVENTORY_INTERFACE = "xyz.openbmc_project.Inventory.Item";
 constexpr auto PRESENT_PROP = "Present";
 constexpr auto POWER_OBJ_PATH = "/org/openbmc/control/power0";
 constexpr auto POWER_INTERFACE = "org.openbmc.control.Power";

 PowerSupply::PowerSupply(const std::string& name, size_t inst,
                          const std::string& objpath,
                          const std::string& invpath,
                          sdbusplus::bus::bus& bus,
                          event::Event& e,
                          std::chrono::seconds& t)
     : Device(name, inst), monitorPath(objpath), pmbusIntf(objpath),
       inventoryPath(invpath), bus(bus), event(e), powerOnInterval(t),
       powerOnTimer(e, [this]()
                    {
                        this->powerOn = true;
                    })
 {
     using namespace sdbusplus::bus;
     auto present_obj_path = INVENTORY_OBJ_PATH + inventoryPath;
     presentMatch = std::make_unique<match_t>(bus,
                                              match::rules::propertiesChanged(
                                                      present_obj_path,
                                                      INVENTORY_INTERFACE),
                                              [this](auto& msg)
                                              {
                                                  this->inventoryChanged(msg);
                                              });
     // Get initial presence state.
     updatePresence();

     // Subscribe to power state changes
     powerOnMatch = std::make_unique<match_t>(bus,
                                              match::rules::propertiesChanged(
                                                      POWER_OBJ_PATH,
                                                      POWER_INTERFACE),
                                              [this](auto& msg)
                                              {
                                                  this->powerStateChanged(msg);
                                              });
     // Get initial power state.
     updatePowerState();
 }


 void PowerSupply::analyze()
 {
     using namespace witherspoon::pmbus;

     try
     {
         if (present)
         {
             std::uint16_t statusWord = 0;

             // Read the 2 byte STATUS_WORD value to check for faults.
             statusWord = pmbusIntf.read(STATUS_WORD, Type::Debug);

             //TODO: 3 consecutive reads should be performed.
             // If 3 consecutive reads are seen, log the fault.
             // Driver gives cached value, read once a second.
             // increment for fault on, decrement for fault off, to deglitch.
             // If count reaches 3, we have fault. If count reaches 0, fault is
             // cleared.

             checkInputFault(statusWord);

             if (powerOn)
             {
                 checkPGOrUnitOffFault(statusWord);
                 checkCurrentOutOverCurrentFault(statusWord);
                 checkOutputOvervoltageFault(statusWord);
                 checkFanFault(statusWord);
             }
         }
     }
     catch (ReadFailure& e)
     {
         if (!readFailLogged)
         {
             commit<ReadFailure>();
             readFailLogged = true;
         }
     }

     return;
 }

 void PowerSupply::inventoryChanged(sdbusplus::message::message& msg)
 {
     std::string msgSensor;
     std::map<std::string, sdbusplus::message::variant<uint32_t, bool>> msgData;
     msg.read(msgSensor, msgData);

     // Check if it was the Present property that changed.
     auto valPropMap = msgData.find(PRESENT_PROP);
     if (valPropMap != msgData.end())
     {
         present = sdbusplus::message::variant_ns::get<bool>(valPropMap->second);

         if (present)
         {
             readFailLogged = false;
             vinUVFault = false;
             inputFault = false;
             outputOCFault = false;
             outputOVFault = false;
             fanFault = false;
         }
     }

     return;
 }

 void PowerSupply::updatePresence()
 {
     // Use getProperty utility function to get presence status.
     std::string path = INVENTORY_OBJ_PATH + inventoryPath;
     std::string service = "xyz.openbmc_project.Inventory.Manager";

     try
     {
         util::getProperty(INVENTORY_INTERFACE, PRESENT_PROP, path,
                           service, bus, this->present);
     }
     catch (std::exception& e)
     {
         // If we happen to be trying to update presence just as it is being
         // updated, we may encounter a runtime_error. Just catch that for
         // now, let the inventoryChanged signal handler update presence later.
         present = false;
     }

 }

 void PowerSupply::powerStateChanged(sdbusplus::message::message& msg)
 {
     int32_t state = 0;
     std::string msgSensor;
     std::map<std::string, sdbusplus::message::variant<int32_t, int32_t>>
             msgData;
     msg.read(msgSensor, msgData);

     // Check if it was the Present property that changed.
     auto valPropMap = msgData.find("state");
     if (valPropMap != msgData.end())
     {
         state = sdbusplus::message::variant_ns::get<int32_t>(valPropMap->second);

         // Power is on when state=1. Set the fault logged variables to false
         // and start the power on timer when the state changes to 1.
         if (state)
         {
             readFailLogged = false;
             vinUVFault = false;
             inputFault = false;
             powerOnFault = false;
             outputOCFault = false;
             outputOVFault = false;
             fanFault = false;
             powerOnTimer.start(powerOnInterval, Timer::TimerType::oneshot);
         }
         else
         {
             powerOnTimer.stop();
             powerOn = false;
         }
     }

 }

 void PowerSupply::updatePowerState()
 {
     // When state = 1, system is powered on
     int32_t state = 0;

     try
     {
         auto service = util::getService(POWER_OBJ_PATH,
                                         POWER_INTERFACE,
                                         bus);

         // Use getProperty utility function to get power state.
         util::getProperty<int32_t>(POWER_INTERFACE,
                                    "state",
                                    POWER_OBJ_PATH,
                                    service,
                                    bus,
                                    state);

         if (state)
         {
             powerOn = true;
         }
         else
         {
             powerOn = false;
         }
     }
     catch (std::exception& e)
     {
         log<level::INFO>("Failed to get power state. Assuming it is off.");
         powerOn = false;
     }

 }

 void PowerSupply::checkInputFault(const uint16_t statusWord)
 {
     using namespace witherspoon::pmbus;

     std::uint8_t  statusInput = 0;

     if ((statusWord & status_word::VIN_UV_FAULT) && !vinUVFault)
     {
         vinUVFault = true;

         util::NamesValues nv;
         nv.add("STATUS_WORD", statusWord);

         using metadata = xyz::openbmc_project::Power::Fault::
                 PowerSupplyUnderVoltageFault;

         report<PowerSupplyUnderVoltageFault>(metadata::RAW_STATUS(
                                                      nv.get().c_str()));
     }
     else
     {
         if (vinUVFault)
         {
             vinUVFault = false;
             log<level::INFO>("VIN_UV_FAULT cleared",
                              entry("POWERSUPPLY=%s",
                                      inventoryPath.c_str()));
         }
     }

     if ((statusWord & status_word::INPUT_FAULT_WARN) && !inputFault)
     {
         inputFault = true;

         statusInput = pmbusIntf.read(STATUS_INPUT, Type::Debug);

         util::NamesValues nv;
         nv.add("STATUS_WORD", statusWord);
         nv.add("STATUS_INPUT", statusInput);

         using metadata = xyz::openbmc_project::Power::Fault::
                 PowerSupplyInputFault;

         report<PowerSupplyInputFault>(
                 metadata::RAW_STATUS(nv.get().c_str()));
     }
     else
     {
         if ((inputFault) &&
             !(statusWord & status_word::INPUT_FAULT_WARN))
         {
             inputFault = false;
             statusInput = pmbusIntf.read(STATUS_INPUT, Type::Debug);

             log<level::INFO>("INPUT_FAULT_WARN cleared",
                              entry("POWERSUPPLY=%s", inventoryPath.c_str()),
                              entry("STATUS_WORD=0x%04X", statusWord),
                              entry("STATUS_INPUT=0x%02X", statusInput));
         }
     }
 }

 void PowerSupply::checkPGOrUnitOffFault(const uint16_t statusWord)
 {
     using namespace witherspoon::pmbus;

     std::uint8_t  statusInput = 0;
     std::uint8_t  statusVout = 0;
     std::uint8_t  statusIout = 0;
     std::uint8_t  statusMFR  = 0;

     // Check PG# and UNIT_IS_OFF
     if (((statusWord & status_word::POWER_GOOD_NEGATED) ||
          (statusWord & status_word::UNIT_IS_OFF)) &&
         !powerOnFault)
     {
         statusInput = pmbusIntf.read(STATUS_INPUT, Type::Debug);
         auto status0Vout = pmbusIntf.insertPageNum(STATUS_VOUT, 0);
         statusVout = pmbusIntf.read(status0Vout, Type::Debug);
         statusIout = pmbusIntf.read(STATUS_IOUT, Type::Debug);
         statusMFR = pmbusIntf.read(STATUS_MFR, Type::Debug);

         util::NamesValues nv;
         nv.add("STATUS_WORD", statusWord);
         nv.add("STATUS_INPUT", statusInput);
         nv.add("STATUS_VOUT", statusVout);
         nv.add("STATUS_IOUT", statusIout);
         nv.add("MFR_SPECIFIC", statusMFR);

         using metadata = xyz::openbmc_project::Power::Fault::
                 PowerSupplyShouldBeOn;

         // A power supply is OFF (or pgood low) but should be on.
         report<PowerSupplyShouldBeOn>(metadata::RAW_STATUS(nv.get().c_str()),
                                       metadata::CALLOUT_INVENTORY_PATH(
                                               inventoryPath.c_str()));

         powerOnFault = true;
     }

 }

 void PowerSupply::checkCurrentOutOverCurrentFault(const uint16_t statusWord)
 {
     using namespace witherspoon::pmbus;

     std::uint8_t  statusInput = 0;
     std::uint8_t  statusVout = 0;
     std::uint8_t  statusIout = 0;
     std::uint8_t  statusMFR  = 0;

     // Check for an output overcurrent fault.
     if ((statusWord & status_word::IOUT_OC_FAULT) &&
         !outputOCFault)
     {
         statusInput = pmbusIntf.read(STATUS_INPUT, Type::Debug);
         auto status0Vout = pmbusIntf.insertPageNum(STATUS_VOUT, 0);
         statusVout = pmbusIntf.read(status0Vout, Type::Debug);
         statusIout = pmbusIntf.read(STATUS_IOUT, Type::Debug);
         statusMFR = pmbusIntf.read(STATUS_MFR, Type::Debug);

         util::NamesValues nv;
         nv.add("STATUS_WORD", statusWord);
         nv.add("STATUS_INPUT", statusInput);
         nv.add("STATUS_VOUT", statusVout);
         nv.add("STATUS_IOUT", statusIout);
         nv.add("MFR_SPECIFIC", statusMFR);

         using metadata = xyz::openbmc_project::Power::Fault::
                 PowerSupplyOutputOvercurrent;

         report<PowerSupplyOutputOvercurrent>(metadata::RAW_STATUS(
                                                      nv.get().c_str()),
                                              metadata::CALLOUT_INVENTORY_PATH(
                                                      inventoryPath.c_str()));

         outputOCFault = true;
     }
 }

 void PowerSupply::checkOutputOvervoltageFault(const uint16_t statusWord)
 {
     using namespace witherspoon::pmbus;

     std::uint8_t  statusInput = 0;
     std::uint8_t  statusVout = 0;
     std::uint8_t  statusIout = 0;
     std::uint8_t  statusMFR  = 0;

     // Check for an output overvoltage fault.
     if ((statusWord & status_word::VOUT_OV_FAULT) &&
         !outputOVFault)
     {
         statusInput = pmbusIntf.read(STATUS_INPUT, Type::Debug);
         statusVout = pmbusIntf.read(STATUS_VOUT, Type::Debug);
         statusIout = pmbusIntf.read(STATUS_IOUT, Type::Debug);
         statusMFR = pmbusIntf.read(STATUS_MFR, Type::Debug);

         util::NamesValues nv;
         nv.add("STATUS_WORD", statusWord);
         nv.add("STATUS_INPUT", statusInput);
         nv.add("STATUS_VOUT", statusVout);
         nv.add("STATUS_IOUT", statusIout);
         nv.add("MFR_SPECIFIC", statusMFR);

         using metadata = xyz::openbmc_project::Power::Fault::
                 PowerSupplyOutputOvervoltage;

         report<PowerSupplyOutputOvervoltage>(metadata::RAW_STATUS(
                                                      nv.get().c_str()),
                                              metadata::CALLOUT_INVENTORY_PATH(
                                                      inventoryPath.c_str()));

         outputOVFault = true;
     }
 }

 void PowerSupply::checkFanFault(const uint16_t statusWord)
 {
     using namespace witherspoon::pmbus;

     std::uint8_t statusMFR  = 0;
     std::uint8_t statusTemperature = 0;
     std::uint8_t statusFans12 = 0;

     // Check for an output overcurrent fault.
     if ((statusWord & status_word::FAN_FAULT) &&
         !fanFault)
     {
         statusMFR = pmbusIntf.read(STATUS_MFR, Type::Debug);
         statusTemperature = pmbusIntf.read(STATUS_TEMPERATURE, Type::Debug);
         statusFans12 = pmbusIntf.read(STATUS_FANS_1_2, Type::Debug);

         util::NamesValues nv;
         nv.add("STATUS_WORD", statusWord);
         nv.add("MFR_SPECIFIC", statusMFR);
         nv.add("STATUS_TEMPERATURE", statusTemperature);
         nv.add("STATUS_FANS_1_2", statusFans12);

         using metadata = xyz::openbmc_project::Power::Fault::
                 PowerSupplyFanFault;

         report<PowerSupplyFanFault>(
                 metadata::RAW_STATUS(nv.get().c_str()),
                 metadata::CALLOUT_INVENTORY_PATH(inventoryPath.c_str()));

         fanFault = true;
     }
 }

 void PowerSupply::clearFaults()
 {
     //TODO - Clear faults at pre-poweron. openbmc/openbmc#1736
     return;
 }

 }
 }
 }
	/**
	* Copyright © 2017 IBM Corporation
	*
	* Licensed under the Apache License, Version 2.0 (the "License");
	* you may not use this file except in compliance with the License.
	* You may obtain a copy of the License at
	*
	* http://www.apache.org/licenses/LICENSE-2.0
	*
	* Unless required by applicable law or agreed to in writing, software
	* distributed under the License is distributed on an "AS IS" BASIS,
	* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
	* See the License for the specific language governing permissions and
	* limitations under the License.
	*/
	#include <phosphor-logging/log.hpp>
	#include <phosphor-logging/elog.hpp>
	#include <xyz/openbmc_project/Sensor/Device/error.hpp>
	#include <xyz/openbmc_project/Control/Device/error.hpp>
	#include <xyz/openbmc_project/Power/Fault/error.hpp>
	#include "elog-errors.hpp"
	#include "names_values.hpp"
	#include "power_supply.hpp"
	#include "pmbus.hpp"
	#include "utility.hpp"

	using namespace phosphor::logging;
	using namespace sdbusplus::xyz::openbmc_project::Control::Device::Error;
	using namespace sdbusplus::xyz::openbmc_project::Sensor::Device::Error;
	using namespace sdbusplus::xyz::openbmc_project::Power::Fault::Error;

	namespace witherspoon
	{
	namespace power
	{
	namespace psu
	{

	constexpr auto INVENTORY_OBJ_PATH = "/xyz/openbmc_project/inventory";
	constexpr auto INVENTORY_INTERFACE = "xyz.openbmc_project.Inventory.Item";
	constexpr auto PRESENT_PROP = "Present";
	constexpr auto POWER_OBJ_PATH = "/org/openbmc/control/power0";
	constexpr auto POWER_INTERFACE = "org.openbmc.control.Power";

	PowerSupply::PowerSupply(const std::string& name, size_t inst,
	const std::string& objpath,
	const std::string& invpath,
	sdbusplus::bus::bus& bus,
	event::Event& e,
	std::chrono::seconds& t)
	: Device(name, inst), monitorPath(objpath), pmbusIntf(objpath),
	inventoryPath(invpath), bus(bus), event(e), powerOnInterval(t),
	powerOnTimer(e, [this]()
	{
	this->powerOn = true;
	})
	{
	using namespace sdbusplus::bus;
	auto present_obj_path = INVENTORY_OBJ_PATH + inventoryPath;
	presentMatch = std::make_unique<match_t>(bus,
	match::rules::propertiesChanged(
	present_obj_path,
	INVENTORY_INTERFACE),
	[this](auto& msg)
	{
	this->inventoryChanged(msg);
	});
	// Get initial presence state.
	updatePresence();

	// Subscribe to power state changes
	powerOnMatch = std::make_unique<match_t>(bus,
	match::rules::propertiesChanged(
	POWER_OBJ_PATH,
	POWER_INTERFACE),
	[this](auto& msg)
	{
	this->powerStateChanged(msg);
	});
	// Get initial power state.
	updatePowerState();
	}


	void PowerSupply::analyze()
	{
	using namespace witherspoon::pmbus;

	try
	{
	if (present)
	{
	std::uint16_t statusWord = 0;

	// Read the 2 byte STATUS_WORD value to check for faults.
	statusWord = pmbusIntf.read(STATUS_WORD, Type::Debug);

	//TODO: 3 consecutive reads should be performed.
	// If 3 consecutive reads are seen, log the fault.
	// Driver gives cached value, read once a second.
	// increment for fault on, decrement for fault off, to deglitch.
	// If count reaches 3, we have fault. If count reaches 0, fault is
	// cleared.

	checkInputFault(statusWord);

	if (powerOn)
	{
	checkPGOrUnitOffFault(statusWord);
	checkCurrentOutOverCurrentFault(statusWord);
	checkOutputOvervoltageFault(statusWord);
	checkFanFault(statusWord);
	}
	}
	}
	catch (ReadFailure& e)
	{
	if (!readFailLogged)
	{
	commit<ReadFailure>();
	readFailLogged = true;
	}
	}

	return;
	}

	void PowerSupply::inventoryChanged(sdbusplus::message::message& msg)
	{
	std::string msgSensor;
	std::map<std::string, sdbusplus::message::variant<uint32_t, bool>> msgData;
	msg.read(msgSensor, msgData);

	// Check if it was the Present property that changed.
	auto valPropMap = msgData.find(PRESENT_PROP);
	if (valPropMap != msgData.end())
	{
	present = sdbusplus::message::variant_ns::get<bool>(valPropMap->second);

	if (present)
	{
	readFailLogged = false;
	vinUVFault = false;
	inputFault = false;
	outputOCFault = false;
	outputOVFault = false;
	fanFault = false;
	}
	}

	return;
	}

	void PowerSupply::updatePresence()
	{
	// Use getProperty utility function to get presence status.
	std::string path = INVENTORY_OBJ_PATH + inventoryPath;
	std::string service = "xyz.openbmc_project.Inventory.Manager";

	try
	{
	util::getProperty(INVENTORY_INTERFACE, PRESENT_PROP, path,
	service, bus, this->present);
	}
	catch (std::exception& e)
	{
	// If we happen to be trying to update presence just as it is being
	// updated, we may encounter a runtime_error. Just catch that for
	// now, let the inventoryChanged signal handler update presence later.
	present = false;
	}

	}

	void PowerSupply::powerStateChanged(sdbusplus::message::message& msg)
	{
	int32_t state = 0;
	std::string msgSensor;
	std::map<std::string, sdbusplus::message::variant<int32_t, int32_t>>
	msgData;
	msg.read(msgSensor, msgData);

	// Check if it was the Present property that changed.
	auto valPropMap = msgData.find("state");
	if (valPropMap != msgData.end())
	{
	state = sdbusplus::message::variant_ns::get<int32_t>(valPropMap->second);

	// Power is on when state=1. Set the fault logged variables to false
	// and start the power on timer when the state changes to 1.
	if (state)
	{
	readFailLogged = false;
	vinUVFault = false;
	inputFault = false;
	powerOnFault = false;
	outputOCFault = false;
	outputOVFault = false;
	fanFault = false;
	powerOnTimer.start(powerOnInterval, Timer::TimerType::oneshot);
	}
	else
	{
	powerOnTimer.stop();
	powerOn = false;
	}
	}

	}

	void PowerSupply::updatePowerState()
	{
	// When state = 1, system is powered on
	int32_t state = 0;

	try
	{
	auto service = util::getService(POWER_OBJ_PATH,
	POWER_INTERFACE,
	bus);

	// Use getProperty utility function to get power state.
	util::getProperty<int32_t>(POWER_INTERFACE,
	"state",
	POWER_OBJ_PATH,
	service,
	bus,
	state);

	if (state)
	{
	powerOn = true;
	}
	else
	{
	powerOn = false;
	}
	}
	catch (std::exception& e)
	{
	log<level::INFO>("Failed to get power state. Assuming it is off.");
	powerOn = false;
	}

	}

	void PowerSupply::checkInputFault(const uint16_t statusWord)
	{
	using namespace witherspoon::pmbus;

	std::uint8_t statusInput = 0;

	if ((statusWord & status_word::VIN_UV_FAULT) && !vinUVFault)
	{
	vinUVFault = true;

	util::NamesValues nv;
	nv.add("STATUS_WORD", statusWord);

	using metadata = xyz::openbmc_project::Power::Fault::
	PowerSupplyUnderVoltageFault;

	report<PowerSupplyUnderVoltageFault>(metadata::RAW_STATUS(
	nv.get().c_str()));
	}
	else
	{
	if (vinUVFault)
	{
	vinUVFault = false;
	log<level::INFO>("VIN_UV_FAULT cleared",
	entry("POWERSUPPLY=%s",
	inventoryPath.c_str()));
	}
	}

	if ((statusWord & status_word::INPUT_FAULT_WARN) && !inputFault)
	{
	inputFault = true;

	statusInput = pmbusIntf.read(STATUS_INPUT, Type::Debug);

	util::NamesValues nv;
	nv.add("STATUS_WORD", statusWord);
	nv.add("STATUS_INPUT", statusInput);

	using metadata = xyz::openbmc_project::Power::Fault::
	PowerSupplyInputFault;

	report<PowerSupplyInputFault>(
	metadata::RAW_STATUS(nv.get().c_str()));
	}
	else
	{
	if ((inputFault) &&
	!(statusWord & status_word::INPUT_FAULT_WARN))
	{
	inputFault = false;
	statusInput = pmbusIntf.read(STATUS_INPUT, Type::Debug);

	log<level::INFO>("INPUT_FAULT_WARN cleared",
	entry("POWERSUPPLY=%s", inventoryPath.c_str()),
	entry("STATUS_WORD=0x%04X", statusWord),
	entry("STATUS_INPUT=0x%02X", statusInput));
	}
	}
	}

	void PowerSupply::checkPGOrUnitOffFault(const uint16_t statusWord)
	{
	using namespace witherspoon::pmbus;

	std::uint8_t statusInput = 0;
	std::uint8_t statusVout = 0;
	std::uint8_t statusIout = 0;
	std::uint8_t statusMFR = 0;

	// Check PG# and UNIT_IS_OFF
	if (((statusWord & status_word::POWER_GOOD_NEGATED) \|\|
	(statusWord & status_word::UNIT_IS_OFF)) &&
	!powerOnFault)
	{
	statusInput = pmbusIntf.read(STATUS_INPUT, Type::Debug);
	auto status0Vout = pmbusIntf.insertPageNum(STATUS_VOUT, 0);
	statusVout = pmbusIntf.read(status0Vout, Type::Debug);
	statusIout = pmbusIntf.read(STATUS_IOUT, Type::Debug);
	statusMFR = pmbusIntf.read(STATUS_MFR, Type::Debug);

	util::NamesValues nv;
	nv.add("STATUS_WORD", statusWord);
	nv.add("STATUS_INPUT", statusInput);
	nv.add("STATUS_VOUT", statusVout);
	nv.add("STATUS_IOUT", statusIout);
	nv.add("MFR_SPECIFIC", statusMFR);

	using metadata = xyz::openbmc_project::Power::Fault::
	PowerSupplyShouldBeOn;

	// A power supply is OFF (or pgood low) but should be on.
	report<PowerSupplyShouldBeOn>(metadata::RAW_STATUS(nv.get().c_str()),
	metadata::CALLOUT_INVENTORY_PATH(
	inventoryPath.c_str()));

	powerOnFault = true;
	}

	}

	void PowerSupply::checkCurrentOutOverCurrentFault(const uint16_t statusWord)
	{
	using namespace witherspoon::pmbus;

	std::uint8_t statusInput = 0;
	std::uint8_t statusVout = 0;
	std::uint8_t statusIout = 0;
	std::uint8_t statusMFR = 0;

	// Check for an output overcurrent fault.
	if ((statusWord & status_word::IOUT_OC_FAULT) &&
	!outputOCFault)
	{
	statusInput = pmbusIntf.read(STATUS_INPUT, Type::Debug);
	auto status0Vout = pmbusIntf.insertPageNum(STATUS_VOUT, 0);
	statusVout = pmbusIntf.read(status0Vout, Type::Debug);
	statusIout = pmbusIntf.read(STATUS_IOUT, Type::Debug);
	statusMFR = pmbusIntf.read(STATUS_MFR, Type::Debug);

	util::NamesValues nv;
	nv.add("STATUS_WORD", statusWord);
	nv.add("STATUS_INPUT", statusInput);
	nv.add("STATUS_VOUT", statusVout);
	nv.add("STATUS_IOUT", statusIout);
	nv.add("MFR_SPECIFIC", statusMFR);

	using metadata = xyz::openbmc_project::Power::Fault::
	PowerSupplyOutputOvercurrent;

	report<PowerSupplyOutputOvercurrent>(metadata::RAW_STATUS(
	nv.get().c_str()),
	metadata::CALLOUT_INVENTORY_PATH(
	inventoryPath.c_str()));

	outputOCFault = true;
	}
	}

	void PowerSupply::checkOutputOvervoltageFault(const uint16_t statusWord)
	{
	using namespace witherspoon::pmbus;

	std::uint8_t statusInput = 0;
	std::uint8_t statusVout = 0;
	std::uint8_t statusIout = 0;
	std::uint8_t statusMFR = 0;

	// Check for an output overvoltage fault.
	if ((statusWord & status_word::VOUT_OV_FAULT) &&
	!outputOVFault)
	{
	statusInput = pmbusIntf.read(STATUS_INPUT, Type::Debug);
	statusVout = pmbusIntf.read(STATUS_VOUT, Type::Debug);
	statusIout = pmbusIntf.read(STATUS_IOUT, Type::Debug);
	statusMFR = pmbusIntf.read(STATUS_MFR, Type::Debug);

	util::NamesValues nv;
	nv.add("STATUS_WORD", statusWord);
	nv.add("STATUS_INPUT", statusInput);
	nv.add("STATUS_VOUT", statusVout);
	nv.add("STATUS_IOUT", statusIout);
	nv.add("MFR_SPECIFIC", statusMFR);

	using metadata = xyz::openbmc_project::Power::Fault::
	PowerSupplyOutputOvervoltage;

	report<PowerSupplyOutputOvervoltage>(metadata::RAW_STATUS(
	nv.get().c_str()),
	metadata::CALLOUT_INVENTORY_PATH(
	inventoryPath.c_str()));

	outputOVFault = true;
	}
	}

	void PowerSupply::checkFanFault(const uint16_t statusWord)
	{
	using namespace witherspoon::pmbus;

	std::uint8_t statusMFR = 0;
	std::uint8_t statusTemperature = 0;
	std::uint8_t statusFans12 = 0;

	// Check for an output overcurrent fault.
	if ((statusWord & status_word::FAN_FAULT) &&
	!fanFault)
	{
	statusMFR = pmbusIntf.read(STATUS_MFR, Type::Debug);
	statusTemperature = pmbusIntf.read(STATUS_TEMPERATURE, Type::Debug);
	statusFans12 = pmbusIntf.read(STATUS_FANS_1_2, Type::Debug);

	util::NamesValues nv;
	nv.add("STATUS_WORD", statusWord);
	nv.add("MFR_SPECIFIC", statusMFR);
	nv.add("STATUS_TEMPERATURE", statusTemperature);
	nv.add("STATUS_FANS_1_2", statusFans12);

	using metadata = xyz::openbmc_project::Power::Fault::
	PowerSupplyFanFault;

	report<PowerSupplyFanFault>(
	metadata::RAW_STATUS(nv.get().c_str()),
	metadata::CALLOUT_INVENTORY_PATH(inventoryPath.c_str()));

	fanFault = true;
	}
	}

	void PowerSupply::clearFaults()
	{
	//TODO - Clear faults at pre-poweron. openbmc/openbmc#1736
	return;
	}

	}
	}
	}