phosphor-power-sequencer/test/ucd90x_device_tests.cpp - openbmc/phosphor-power - Gitiles

 /**
  * Copyright © 2024 IBM Corporation
  *
  * Licensed under the Apache License, Version 2.0 (the "License");
  * you may not use this file except in compliance with the License.
  * You may obtain a copy of the License at
  *
  *     http://www.apache.org/licenses/LICENSE-2.0
  *
  * Unless required by applicable law or agreed to in writing, software
  * distributed under the License is distributed on an "AS IS" BASIS,
  * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  * See the License for the specific language governing permissions and
  * limitations under the License.
  */

 #include "mock_pmbus.hpp"
 #include "mock_services.hpp"
 #include "pmbus.hpp"
 #include "rail.hpp"
 #include "services.hpp"
 #include "ucd90x_device.hpp"

 #include <cstdint>
 #include <exception>
 #include <map>
 #include <memory>
 #include <optional>
 #include <string>
 #include <utility>
 #include <vector>

 #include <gmock/gmock.h>
 #include <gtest/gtest.h>

 using namespace phosphor::power::sequencer;
 using namespace phosphor::pmbus;

 using ::testing::Return;
 using ::testing::Throw;

 /**
  * Creates a Rail object that checks for a pgood fault using a GPIO.
  *
  * @param name Unique name for the rail
  * @param gpio GPIO line to read to determine the pgood status of the rail
  * @return Rail object
  */
 static std::unique_ptr<Rail> createRail(const std::string& name,
                                         unsigned int gpioLine)
 {
     std::optional<std::string> presence{};
     std::optional<uint8_t> page{};
     bool isPowerSupplyRail{false};
     bool checkStatusVout{false};
     bool compareVoltageToLimit{false};
     bool activeLow{false};
     std::optional<GPIO> gpio{GPIO{gpioLine, activeLow}};
     return std::make_unique<Rail>(name, presence, page, isPowerSupplyRail,
                                   checkStatusVout, compareVoltageToLimit, gpio);
 }

 TEST(UCD90xDeviceTests, Constructor)
 {
     MockServices services;

     std::string name{"ucd90320"};
     std::vector<std::unique_ptr<Rail>> rails;
     rails.emplace_back(createRail("VDD", 5));
     rails.emplace_back(createRail("VIO", 7));
     uint8_t bus{3};
     uint16_t address{0x72};
     UCD90xDevice device{name, std::move(rails), services, bus, address};

     EXPECT_EQ(device.getName(), name);
     EXPECT_EQ(device.getRails().size(), 2);
     EXPECT_EQ(device.getRails()[0]->getName(), "VDD");
     EXPECT_EQ(device.getRails()[1]->getName(), "VIO");
     EXPECT_EQ(device.getBus(), bus);
     EXPECT_EQ(device.getAddress(), address);
     EXPECT_EQ(device.getDriverName(), "ucd9000");
     EXPECT_EQ(device.getInstance(), 0);
     EXPECT_NE(&(device.getPMBusInterface()), nullptr);
 }

 TEST(UCD90xDeviceTests, GetMfrStatus)
 {
     // Test where works
     {
         MockServices services;

         std::string name{"ucd90320"};
         std::vector<std::unique_ptr<Rail>> rails;
         uint8_t bus{3};
         uint16_t address{0x72};
         UCD90xDevice device{name, std::move(rails), services, bus, address};

         MockPMBus& pmbus = static_cast<MockPMBus&>(device.getPMBusInterface());
         uint64_t mfrStatus{0x123456789abcull};
         EXPECT_CALL(pmbus, read("mfr_status", Type::HwmonDeviceDebug, true))
             .Times(1)
             .WillOnce(Return(mfrStatus));

         EXPECT_EQ(device.getMfrStatus(), mfrStatus);
     }

     // Test where fails with exception
     {
         MockServices services;

         std::string name{"ucd90320"};
         std::vector<std::unique_ptr<Rail>> rails;
         uint8_t bus{3};
         uint16_t address{0x72};
         UCD90xDevice device{name, std::move(rails), services, bus, address};

         MockPMBus& pmbus = static_cast<MockPMBus&>(device.getPMBusInterface());
         EXPECT_CALL(pmbus, read("mfr_status", Type::HwmonDeviceDebug, true))
             .Times(1)
             .WillOnce(Throw(std::runtime_error{"File does not exist"}));

         try
         {
             device.getMfrStatus();
             ADD_FAILURE() << "Should not have reached this line.";
         }
         catch (const std::exception& e)
         {
             EXPECT_STREQ(e.what(),
                          "Unable to read MFR_STATUS for device ucd90320: "
                          "File does not exist");
         }
     }
 }

 TEST(UCD90xDeviceTests, StorePgoodFaultDebugData)
 {
     // This is a protected method and cannot be called directly from a gtest.
     // Call findPgoodFault() which calls storePgoodFaultDebugData().

     // Test where works
     {
         MockServices services;
         std::vector<int> gpioValues{1, 1, 0};
         EXPECT_CALL(services, getGPIOValues("ucd90320"))
             .Times(1)
             .WillOnce(Return(gpioValues));
         EXPECT_CALL(services,
                     logInfoMsg("Device ucd90320 GPIO values: [1, 1, 0]"))
             .Times(1);
         EXPECT_CALL(services,
                     logInfoMsg("Device ucd90320 MFR_STATUS: 0x123456789abc"))
             .Times(1);
         EXPECT_CALL(
             services,
             logErrorMsg(
                 "Pgood fault found in rail monitored by device ucd90320"))
             .Times(1);
         EXPECT_CALL(services, logErrorMsg("Pgood fault detected in rail VDD"))
             .Times(1);
         EXPECT_CALL(
             services,
             logErrorMsg(
                 "Rail VDD pgood GPIO line offset 2 has inactive value 0"))
             .Times(1);

         std::string name{"ucd90320"};
         std::vector<std::unique_ptr<Rail>> rails;
         rails.emplace_back(createRail("VDD", 2));
         uint8_t bus{3};
         uint16_t address{0x72};
         UCD90xDevice device{name, std::move(rails), services, bus, address};

         MockPMBus& pmbus = static_cast<MockPMBus&>(device.getPMBusInterface());
         EXPECT_CALL(pmbus, getPath(Type::Hwmon))
             .Times(1)
             .WillOnce(Return("/tmp"));
         EXPECT_CALL(pmbus, read("mfr_status", Type::HwmonDeviceDebug, true))
             .Times(1)
             .WillOnce(Return(0x123456789abcull));

         // Call findPgoodFault() which calls storePgoodFaultDebugData()
         std::string powerSupplyError{};
         std::map<std::string, std::string> additionalData{};
         std::string error = device.findPgoodFault(services, powerSupplyError,
                                                   additionalData);
         EXPECT_EQ(error,
                   "xyz.openbmc_project.Power.Error.PowerSequencerVoltageFault");
         EXPECT_EQ(additionalData.size(), 6);
         EXPECT_EQ(additionalData["MFR_STATUS"], "0x123456789abc");
         EXPECT_EQ(additionalData["DEVICE_NAME"], "ucd90320");
         EXPECT_EQ(additionalData["GPIO_VALUES"], "[1, 1, 0]");
         EXPECT_EQ(additionalData["RAIL_NAME"], "VDD");
         EXPECT_EQ(additionalData["GPIO_LINE"], "2");
         EXPECT_EQ(additionalData["GPIO_VALUE"], "0");
     }

     // Test where exception thrown trying to get MFR_STATUS
     {
         MockServices services;
         std::vector<int> gpioValues{1, 1, 0};
         EXPECT_CALL(services, getGPIOValues("ucd90320"))
             .Times(1)
             .WillOnce(Return(gpioValues));
         EXPECT_CALL(services,
                     logInfoMsg("Device ucd90320 GPIO values: [1, 1, 0]"))
             .Times(1);
         EXPECT_CALL(
             services,
             logErrorMsg(
                 "Pgood fault found in rail monitored by device ucd90320"))
             .Times(1);
         EXPECT_CALL(services, logErrorMsg("Pgood fault detected in rail VDD"))
             .Times(1);
         EXPECT_CALL(
             services,
             logErrorMsg(
                 "Rail VDD pgood GPIO line offset 2 has inactive value 0"))
             .Times(1);

         std::string name{"ucd90320"};
         std::vector<std::unique_ptr<Rail>> rails;
         rails.emplace_back(createRail("VDD", 2));
         uint8_t bus{3};
         uint16_t address{0x72};
         UCD90xDevice device{name, std::move(rails), services, bus, address};

         MockPMBus& pmbus = static_cast<MockPMBus&>(device.getPMBusInterface());
         EXPECT_CALL(pmbus, getPath(Type::Hwmon))
             .Times(1)
             .WillOnce(Return("/tmp"));
         EXPECT_CALL(pmbus, read("mfr_status", Type::HwmonDeviceDebug, true))
             .Times(1)
             .WillOnce(Throw(std::runtime_error{"File does not exist"}));

         // Call findPgoodFault() which calls storePgoodFaultDebugData()
         std::string powerSupplyError{};
         std::map<std::string, std::string> additionalData{};
         std::string error = device.findPgoodFault(services, powerSupplyError,
                                                   additionalData);
         EXPECT_EQ(error,
                   "xyz.openbmc_project.Power.Error.PowerSequencerVoltageFault");
         EXPECT_EQ(additionalData.size(), 5);
         EXPECT_EQ(additionalData["DEVICE_NAME"], "ucd90320");
         EXPECT_EQ(additionalData["GPIO_VALUES"], "[1, 1, 0]");
         EXPECT_EQ(additionalData["RAIL_NAME"], "VDD");
         EXPECT_EQ(additionalData["GPIO_LINE"], "2");
         EXPECT_EQ(additionalData["GPIO_VALUE"], "0");
     }
 }
	/**
	* Copyright © 2024 IBM Corporation
	*
	* Licensed under the Apache License, Version 2.0 (the "License");
	* you may not use this file except in compliance with the License.
	* You may obtain a copy of the License at
	*
	* http://www.apache.org/licenses/LICENSE-2.0
	*
	* Unless required by applicable law or agreed to in writing, software
	* distributed under the License is distributed on an "AS IS" BASIS,
	* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
	* See the License for the specific language governing permissions and
	* limitations under the License.
	*/

	#include "mock_pmbus.hpp"
	#include "mock_services.hpp"
	#include "pmbus.hpp"
	#include "rail.hpp"
	#include "services.hpp"
	#include "ucd90x_device.hpp"

	#include <cstdint>
	#include <exception>
	#include <map>
	#include <memory>
	#include <optional>
	#include <string>
	#include <utility>
	#include <vector>

	#include <gmock/gmock.h>
	#include <gtest/gtest.h>

	using namespace phosphor::power::sequencer;
	using namespace phosphor::pmbus;

	using ::testing::Return;
	using ::testing::Throw;

	/**
	* Creates a Rail object that checks for a pgood fault using a GPIO.
	*
	* @param name Unique name for the rail
	* @param gpio GPIO line to read to determine the pgood status of the rail
	* @return Rail object
	*/
	static std::unique_ptr<Rail> createRail(const std::string& name,
	unsigned int gpioLine)
	{
	std::optional<std::string> presence{};
	std::optional<uint8_t> page{};
	bool isPowerSupplyRail{false};
	bool checkStatusVout{false};
	bool compareVoltageToLimit{false};
	bool activeLow{false};
	std::optional<GPIO> gpio{GPIO{gpioLine, activeLow}};
	return std::make_unique<Rail>(name, presence, page, isPowerSupplyRail,
	checkStatusVout, compareVoltageToLimit, gpio);
	}

	TEST(UCD90xDeviceTests, Constructor)
	{
	MockServices services;

	std::string name{"ucd90320"};
	std::vector<std::unique_ptr<Rail>> rails;
	rails.emplace_back(createRail("VDD", 5));
	rails.emplace_back(createRail("VIO", 7));
	uint8_t bus{3};
	uint16_t address{0x72};
	UCD90xDevice device{name, std::move(rails), services, bus, address};

	EXPECT_EQ(device.getName(), name);
	EXPECT_EQ(device.getRails().size(), 2);
	EXPECT_EQ(device.getRails()[0]->getName(), "VDD");
	EXPECT_EQ(device.getRails()[1]->getName(), "VIO");
	EXPECT_EQ(device.getBus(), bus);
	EXPECT_EQ(device.getAddress(), address);
	EXPECT_EQ(device.getDriverName(), "ucd9000");
	EXPECT_EQ(device.getInstance(), 0);
	EXPECT_NE(&(device.getPMBusInterface()), nullptr);
	}

	TEST(UCD90xDeviceTests, GetMfrStatus)
	{
	// Test where works
	{
	MockServices services;

	std::string name{"ucd90320"};
	std::vector<std::unique_ptr<Rail>> rails;
	uint8_t bus{3};
	uint16_t address{0x72};
	UCD90xDevice device{name, std::move(rails), services, bus, address};

	MockPMBus& pmbus = static_cast<MockPMBus&>(device.getPMBusInterface());
	uint64_t mfrStatus{0x123456789abcull};
	EXPECT_CALL(pmbus, read("mfr_status", Type::HwmonDeviceDebug, true))
	.Times(1)
	.WillOnce(Return(mfrStatus));

	EXPECT_EQ(device.getMfrStatus(), mfrStatus);
	}

	// Test where fails with exception
	{
	MockServices services;

	std::string name{"ucd90320"};
	std::vector<std::unique_ptr<Rail>> rails;
	uint8_t bus{3};
	uint16_t address{0x72};
	UCD90xDevice device{name, std::move(rails), services, bus, address};

	MockPMBus& pmbus = static_cast<MockPMBus&>(device.getPMBusInterface());
	EXPECT_CALL(pmbus, read("mfr_status", Type::HwmonDeviceDebug, true))
	.Times(1)
	.WillOnce(Throw(std::runtime_error{"File does not exist"}));

	try
	{
	device.getMfrStatus();
	ADD_FAILURE() << "Should not have reached this line.";
	}
	catch (const std::exception& e)
	{
	EXPECT_STREQ(e.what(),
	"Unable to read MFR_STATUS for device ucd90320: "
	"File does not exist");
	}
	}
	}

	TEST(UCD90xDeviceTests, StorePgoodFaultDebugData)
	{
	// This is a protected method and cannot be called directly from a gtest.
	// Call findPgoodFault() which calls storePgoodFaultDebugData().

	// Test where works
	{
	MockServices services;
	std::vector<int> gpioValues{1, 1, 0};
	EXPECT_CALL(services, getGPIOValues("ucd90320"))
	.Times(1)
	.WillOnce(Return(gpioValues));
	EXPECT_CALL(services,
	logInfoMsg("Device ucd90320 GPIO values: [1, 1, 0]"))
	.Times(1);
	EXPECT_CALL(services,
	logInfoMsg("Device ucd90320 MFR_STATUS: 0x123456789abc"))
	.Times(1);
	EXPECT_CALL(
	services,
	logErrorMsg(
	"Pgood fault found in rail monitored by device ucd90320"))
	.Times(1);
	EXPECT_CALL(services, logErrorMsg("Pgood fault detected in rail VDD"))
	.Times(1);
	EXPECT_CALL(
	services,
	logErrorMsg(
	"Rail VDD pgood GPIO line offset 2 has inactive value 0"))
	.Times(1);

	std::string name{"ucd90320"};
	std::vector<std::unique_ptr<Rail>> rails;
	rails.emplace_back(createRail("VDD", 2));
	uint8_t bus{3};
	uint16_t address{0x72};
	UCD90xDevice device{name, std::move(rails), services, bus, address};

	MockPMBus& pmbus = static_cast<MockPMBus&>(device.getPMBusInterface());
	EXPECT_CALL(pmbus, getPath(Type::Hwmon))
	.Times(1)
	.WillOnce(Return("/tmp"));
	EXPECT_CALL(pmbus, read("mfr_status", Type::HwmonDeviceDebug, true))
	.Times(1)
	.WillOnce(Return(0x123456789abcull));

	// Call findPgoodFault() which calls storePgoodFaultDebugData()
	std::string powerSupplyError{};
	std::map<std::string, std::string> additionalData{};
	std::string error = device.findPgoodFault(services, powerSupplyError,
	additionalData);
	EXPECT_EQ(error,
	"xyz.openbmc_project.Power.Error.PowerSequencerVoltageFault");
	EXPECT_EQ(additionalData.size(), 6);
	EXPECT_EQ(additionalData["MFR_STATUS"], "0x123456789abc");
	EXPECT_EQ(additionalData["DEVICE_NAME"], "ucd90320");
	EXPECT_EQ(additionalData["GPIO_VALUES"], "[1, 1, 0]");
	EXPECT_EQ(additionalData["RAIL_NAME"], "VDD");
	EXPECT_EQ(additionalData["GPIO_LINE"], "2");
	EXPECT_EQ(additionalData["GPIO_VALUE"], "0");
	}

	// Test where exception thrown trying to get MFR_STATUS
	{
	MockServices services;
	std::vector<int> gpioValues{1, 1, 0};
	EXPECT_CALL(services, getGPIOValues("ucd90320"))
	.Times(1)
	.WillOnce(Return(gpioValues));
	EXPECT_CALL(services,
	logInfoMsg("Device ucd90320 GPIO values: [1, 1, 0]"))
	.Times(1);
	EXPECT_CALL(
	services,
	logErrorMsg(
	"Pgood fault found in rail monitored by device ucd90320"))
	.Times(1);
	EXPECT_CALL(services, logErrorMsg("Pgood fault detected in rail VDD"))
	.Times(1);
	EXPECT_CALL(
	services,
	logErrorMsg(
	"Rail VDD pgood GPIO line offset 2 has inactive value 0"))
	.Times(1);

	std::string name{"ucd90320"};
	std::vector<std::unique_ptr<Rail>> rails;
	rails.emplace_back(createRail("VDD", 2));
	uint8_t bus{3};
	uint16_t address{0x72};
	UCD90xDevice device{name, std::move(rails), services, bus, address};

	MockPMBus& pmbus = static_cast<MockPMBus&>(device.getPMBusInterface());
	EXPECT_CALL(pmbus, getPath(Type::Hwmon))
	.Times(1)
	.WillOnce(Return("/tmp"));
	EXPECT_CALL(pmbus, read("mfr_status", Type::HwmonDeviceDebug, true))
	.Times(1)
	.WillOnce(Throw(std::runtime_error{"File does not exist"}));

	// Call findPgoodFault() which calls storePgoodFaultDebugData()
	std::string powerSupplyError{};
	std::map<std::string, std::string> additionalData{};
	std::string error = device.findPgoodFault(services, powerSupplyError,
	additionalData);
	EXPECT_EQ(error,
	"xyz.openbmc_project.Power.Error.PowerSequencerVoltageFault");
	EXPECT_EQ(additionalData.size(), 5);
	EXPECT_EQ(additionalData["DEVICE_NAME"], "ucd90320");
	EXPECT_EQ(additionalData["GPIO_VALUES"], "[1, 1, 0]");
	EXPECT_EQ(additionalData["RAIL_NAME"], "VDD");
	EXPECT_EQ(additionalData["GPIO_LINE"], "2");
	EXPECT_EQ(additionalData["GPIO_VALUE"], "0");
	}
	}