blob: c556f82ce71ea8f7d4b265996e89589794a39f80 [file] [log] [blame]
#include "../power_supply.hpp"
#include "mock.hpp"
#include <xyz/openbmc_project/Common/Device/error.hpp>
#include <xyz/openbmc_project/Common/error.hpp>
#include <gmock/gmock.h>
#include <gtest/gtest.h>
using namespace phosphor::power::psu;
using namespace phosphor::pmbus;
using ::testing::_;
using ::testing::Args;
using ::testing::Assign;
using ::testing::DoAll;
using ::testing::ElementsAre;
using ::testing::NotNull;
using ::testing::Return;
using ::testing::StrEq;
static auto PSUInventoryPath = "/xyz/bmc/inv/sys/chassis/board/powersupply0";
static auto PSUGPIOLineName = "presence-ps0";
struct PMBusExpectations
{
uint16_t statusWordValue{0x0000};
uint8_t statusInputValue{0x00};
uint8_t statusMFRValue{0x00};
uint8_t statusCMLValue{0x00};
uint8_t statusVOUTValue{0x00};
uint8_t statusIOUTValue{0x00};
uint8_t statusFans12Value{0x00};
uint8_t statusTempValue{0x00};
};
// Helper function to setup expectations for various STATUS_* commands
void setPMBusExpectations(MockedPMBus& mockPMBus,
const PMBusExpectations& expectations)
{
EXPECT_CALL(mockPMBus, read(STATUS_WORD, _, _))
.Times(1)
.WillOnce(Return(expectations.statusWordValue));
if (expectations.statusWordValue != 0)
{
// If fault bits are on in STATUS_WORD, there will also be a read of
// STATUS_INPUT, STATUS_MFR, STATUS_CML, STATUS_VOUT (page 0), and
// STATUS_TEMPERATURE.
EXPECT_CALL(mockPMBus, read(STATUS_INPUT, _, _))
.Times(1)
.WillOnce(Return(expectations.statusInputValue));
EXPECT_CALL(mockPMBus, read(STATUS_MFR, _, _))
.Times(1)
.WillOnce(Return(expectations.statusMFRValue));
EXPECT_CALL(mockPMBus, read(STATUS_CML, _, _))
.Times(1)
.WillOnce(Return(expectations.statusCMLValue));
// Page will need to be set to 0 to read STATUS_VOUT.
EXPECT_CALL(mockPMBus, insertPageNum(STATUS_VOUT, 0))
.Times(1)
.WillOnce(Return("status0_vout"));
EXPECT_CALL(mockPMBus, read("status0_vout", _, _))
.Times(1)
.WillOnce(Return(expectations.statusVOUTValue));
EXPECT_CALL(mockPMBus, read(STATUS_IOUT, _, _))
.Times(1)
.WillOnce(Return(expectations.statusIOUTValue));
EXPECT_CALL(mockPMBus, read(STATUS_FANS_1_2, _, _))
.Times(1)
.WillOnce(Return(expectations.statusFans12Value));
EXPECT_CALL(mockPMBus, read(STATUS_TEMPERATURE, _, _))
.Times(1)
.WillOnce(Return(expectations.statusTempValue));
}
}
class PowerSupplyTests : public ::testing::Test
{
public:
PowerSupplyTests() :
mockedUtil(reinterpret_cast<const MockedUtil&>(getUtils()))
{
ON_CALL(mockedUtil, getPresence(_, _)).WillByDefault(Return(false));
}
~PowerSupplyTests() override
{
freeUtils();
}
const MockedUtil& mockedUtil;
};
// Helper function for when a power supply goes from missing to present.
void setMissingToPresentExpects(MockedPMBus& pmbus, const MockedUtil& util)
{
// Call to analyze() will update to present, that will trigger updating
// to the correct/latest HWMON directory, in case it changes.
EXPECT_CALL(pmbus, findHwmonDir());
// Presence change from missing to present will trigger write to
// ON_OFF_CONFIG.
EXPECT_CALL(pmbus, writeBinary(ON_OFF_CONFIG, _, _));
// Presence change from missing to present will trigger in1_input read
// in an attempt to get CLEAR_FAULTS called.
// The voltage defaults to 0, the first call to analyze should update the
// voltage to the current reading, triggering another clearing of faults
// due to below minimum to within range voltage.
// This READ_VIN for CLEAR_FAULTS does not check the returned value.
EXPECT_CALL(pmbus, read(READ_VIN, _, _))
.Times(2)
.WillOnce(Return(1))
.WillOnce(Return(2));
// Missing/present call will update Presence in inventory.
EXPECT_CALL(util, setPresence(_, _, true, _));
}
TEST_F(PowerSupplyTests, Constructor)
{
/**
* @param[in] invpath - String for inventory path to use
* @param[in] i2cbus - The bus number this power supply is on
* @param[in] i2caddr - The 16-bit I2C address of the power supply
* @param[in] gpioLineName - The string for the gpio-line-name to read for
* presence.
* @param[in] bindDelay - Time in milliseconds to delay binding the device
* driver after seeing the presence line go active.
*/
auto bus = sdbusplus::bus::new_default();
// Try where inventory path is empty, constructor should fail.
try
{
auto psu =
std::make_unique<PowerSupply>(bus, "", 3, 0x68, PSUGPIOLineName);
ADD_FAILURE() << "Should not have reached this line.";
}
catch (const std::invalid_argument& e)
{
EXPECT_STREQ(e.what(), "Invalid empty inventoryPath");
}
catch (...)
{
ADD_FAILURE() << "Should not have caught exception.";
}
// TODO: Try invalid i2c address?
// Try where gpioLineName is empty.
try
{
auto psu =
std::make_unique<PowerSupply>(bus, PSUInventoryPath, 3, 0x68, "");
ADD_FAILURE()
<< "Should not have reached this line. Invalid gpioLineName.";
}
catch (const std::invalid_argument& e)
{
EXPECT_STREQ(e.what(), "Invalid empty gpioLineName");
}
catch (...)
{
ADD_FAILURE() << "Should not have caught exception.";
}
// Test with valid arguments
// NOT using D-Bus inventory path for presence.
try
{
auto psu = std::make_unique<PowerSupply>(bus, PSUInventoryPath, 3, 0x68,
PSUGPIOLineName);
EXPECT_EQ(psu->isPresent(), false);
EXPECT_EQ(psu->isFaulted(), false);
EXPECT_EQ(psu->hasCommFault(), false);
EXPECT_EQ(psu->hasInputFault(), false);
EXPECT_EQ(psu->hasMFRFault(), false);
EXPECT_EQ(psu->hasVINUVFault(), false);
EXPECT_EQ(psu->hasVoutOVFault(), false);
EXPECT_EQ(psu->hasIoutOCFault(), false);
EXPECT_EQ(psu->hasVoutUVFault(), false);
EXPECT_EQ(psu->hasFanFault(), false);
EXPECT_EQ(psu->hasTempFault(), false);
EXPECT_EQ(psu->hasPgoodFault(), false);
EXPECT_EQ(psu->hasPSKillFault(), false);
EXPECT_EQ(psu->hasPS12VcsFault(), false);
EXPECT_EQ(psu->hasPSCS12VFault(), false);
}
catch (...)
{
ADD_FAILURE() << "Should not have caught exception.";
}
// Test with valid arguments
// TODO: Using D-Bus inventory path for presence.
try
{
// FIXME: How do I get that presenceGPIO.read() in the startup to throw
// an exception?
// EXPECT_CALL(mockedUtil, getPresence(_,
// StrEq(PSUInventoryPath)))
// .Times(1);
}
catch (...)
{
ADD_FAILURE() << "Should not have caught exception.";
}
}
TEST_F(PowerSupplyTests, Analyze)
{
auto bus = sdbusplus::bus::new_default();
{
// If I default to reading the GPIO, I will NOT expect a call to
// getPresence().
PowerSupply psu{bus, PSUInventoryPath, 4, 0x69, PSUGPIOLineName};
MockedGPIOInterface* mockPresenceGPIO =
static_cast<MockedGPIOInterface*>(psu.getPresenceGPIO());
EXPECT_CALL(*mockPresenceGPIO, read()).Times(1).WillOnce(Return(0));
psu.analyze();
// By default, nothing should change.
EXPECT_EQ(psu.isPresent(), false);
EXPECT_EQ(psu.isFaulted(), false);
EXPECT_EQ(psu.hasInputFault(), false);
EXPECT_EQ(psu.hasMFRFault(), false);
EXPECT_EQ(psu.hasVINUVFault(), false);
EXPECT_EQ(psu.hasCommFault(), false);
EXPECT_EQ(psu.hasVoutOVFault(), false);
EXPECT_EQ(psu.hasIoutOCFault(), false);
EXPECT_EQ(psu.hasVoutUVFault(), false);
EXPECT_EQ(psu.hasFanFault(), false);
EXPECT_EQ(psu.hasTempFault(), false);
EXPECT_EQ(psu.hasPgoodFault(), false);
EXPECT_EQ(psu.hasPSKillFault(), false);
EXPECT_EQ(psu.hasPS12VcsFault(), false);
EXPECT_EQ(psu.hasPSCS12VFault(), false);
}
PowerSupply psu2{bus, PSUInventoryPath, 5, 0x6a, PSUGPIOLineName};
// In order to get the various faults tested, the power supply needs to
// be present in order to read from the PMBus device(s).
MockedGPIOInterface* mockPresenceGPIO2 =
static_cast<MockedGPIOInterface*>(psu2.getPresenceGPIO());
// Always return 1 to indicate present.
// Each analyze() call will trigger a read of the presence GPIO.
EXPECT_CALL(*mockPresenceGPIO2, read()).WillRepeatedly(Return(1));
EXPECT_EQ(psu2.isPresent(), false);
MockedPMBus& mockPMBus = static_cast<MockedPMBus&>(psu2.getPMBus());
setMissingToPresentExpects(mockPMBus, mockedUtil);
// STATUS_WORD INPUT fault.
{
// Start with STATUS_WORD 0x0000. Powered on, no faults.
// Set expectations for a no fault
PMBusExpectations expectations;
setPMBusExpectations(mockPMBus, expectations);
// After reading STATUS_WORD, etc., there will be a READ_VIN check.
EXPECT_CALL(mockPMBus, readString(READ_VIN, _))
.Times(1)
.WillOnce(Return("206000"));
psu2.analyze();
EXPECT_EQ(psu2.isPresent(), true);
EXPECT_EQ(psu2.isFaulted(), false);
EXPECT_EQ(psu2.hasInputFault(), false);
EXPECT_EQ(psu2.hasMFRFault(), false);
EXPECT_EQ(psu2.hasVINUVFault(), false);
EXPECT_EQ(psu2.hasCommFault(), false);
EXPECT_EQ(psu2.hasVoutOVFault(), false);
EXPECT_EQ(psu2.hasIoutOCFault(), false);
EXPECT_EQ(psu2.hasVoutUVFault(), false);
EXPECT_EQ(psu2.hasFanFault(), false);
EXPECT_EQ(psu2.hasTempFault(), false);
EXPECT_EQ(psu2.hasPgoodFault(), false);
EXPECT_EQ(psu2.hasPSKillFault(), false);
EXPECT_EQ(psu2.hasPS12VcsFault(), false);
EXPECT_EQ(psu2.hasPSCS12VFault(), false);
// Update expectations for STATUS_WORD input fault/warn
// STATUS_INPUT fault bits ... on.
expectations.statusWordValue = (status_word::INPUT_FAULT_WARN);
expectations.statusInputValue = 0x38;
for (auto x = 1; x <= DEGLITCH_LIMIT; x++)
{
setPMBusExpectations(mockPMBus, expectations);
EXPECT_CALL(mockPMBus, readString(READ_VIN, _))
.Times(1)
.WillOnce(Return("207000"));
psu2.analyze();
EXPECT_EQ(psu2.isPresent(), true);
// Should not be faulted until it reaches the deglitch limit.
EXPECT_EQ(psu2.isFaulted(), x >= DEGLITCH_LIMIT);
EXPECT_EQ(psu2.hasInputFault(), x >= DEGLITCH_LIMIT);
EXPECT_EQ(psu2.hasMFRFault(), false);
EXPECT_EQ(psu2.hasVINUVFault(), false);
EXPECT_EQ(psu2.hasCommFault(), false);
EXPECT_EQ(psu2.hasVoutOVFault(), false);
EXPECT_EQ(psu2.hasIoutOCFault(), false);
EXPECT_EQ(psu2.hasVoutUVFault(), false);
EXPECT_EQ(psu2.hasFanFault(), false);
EXPECT_EQ(psu2.hasTempFault(), false);
EXPECT_EQ(psu2.hasPgoodFault(), false);
EXPECT_EQ(psu2.hasPSKillFault(), false);
EXPECT_EQ(psu2.hasPS12VcsFault(), false);
EXPECT_EQ(psu2.hasPSCS12VFault(), false);
}
}
EXPECT_CALL(mockPMBus, read(READ_VIN, _, _)).Times(1).WillOnce(Return(1));
psu2.clearFaults();
// STATUS_WORD INPUT/UV fault.
{
// First need it to return good status, then the fault
PMBusExpectations expectations;
setPMBusExpectations(mockPMBus, expectations);
EXPECT_CALL(mockPMBus, readString(READ_VIN, _))
.Times(1)
.WillOnce(Return("208000"));
psu2.analyze();
EXPECT_EQ(psu2.isFaulted(), false);
EXPECT_EQ(psu2.hasInputFault(), false);
// Now set fault bits in STATUS_WORD
expectations.statusWordValue =
(status_word::INPUT_FAULT_WARN | status_word::VIN_UV_FAULT);
// STATUS_INPUT fault bits ... on.
expectations.statusInputValue = 0x38;
for (auto x = 1; x <= DEGLITCH_LIMIT; x++)
{
setPMBusExpectations(mockPMBus, expectations);
// Input/UV fault, so voltage should read back low.
EXPECT_CALL(mockPMBus, readString(READ_VIN, _))
.Times(1)
.WillOnce(Return("19123"));
psu2.analyze();
EXPECT_EQ(psu2.isPresent(), true);
// Only faulted if hit deglitch limit
EXPECT_EQ(psu2.isFaulted(), x >= DEGLITCH_LIMIT);
EXPECT_EQ(psu2.hasInputFault(), x >= DEGLITCH_LIMIT);
EXPECT_EQ(psu2.hasVINUVFault(), x >= DEGLITCH_LIMIT);
EXPECT_EQ(psu2.hasMFRFault(), false);
EXPECT_EQ(psu2.hasCommFault(), false);
EXPECT_EQ(psu2.hasVoutOVFault(), false);
EXPECT_EQ(psu2.hasIoutOCFault(), false);
EXPECT_EQ(psu2.hasVoutUVFault(), false);
EXPECT_EQ(psu2.hasFanFault(), false);
EXPECT_EQ(psu2.hasTempFault(), false);
EXPECT_EQ(psu2.hasPgoodFault(), false);
EXPECT_EQ(psu2.hasPSKillFault(), false);
EXPECT_EQ(psu2.hasPS12VcsFault(), false);
EXPECT_EQ(psu2.hasPSCS12VFault(), false);
}
// Turning VIN_UV fault off causes clearing of faults, causing read of
// in1_input as an attempt to get CLEAR_FAULTS called.
expectations.statusWordValue = 0;
setPMBusExpectations(mockPMBus, expectations);
// The call to read the voltage
EXPECT_CALL(mockPMBus, readString(READ_VIN, _))
.Times(1)
.WillOnce(Return("209000"));
// The call for CLEAR_FAULTS command
EXPECT_CALL(mockPMBus, read(READ_VIN, _, _))
.Times(1)
.WillOnce(Return(3));
psu2.analyze();
// Should remain present, no longer be faulted, no input fault, no
// VIN_UV fault. Nothing else should change.
EXPECT_EQ(psu2.isPresent(), true);
EXPECT_EQ(psu2.isFaulted(), false);
EXPECT_EQ(psu2.hasInputFault(), false);
EXPECT_EQ(psu2.hasVINUVFault(), false);
}
EXPECT_CALL(mockPMBus, read(READ_VIN, _, _)).Times(1).WillOnce(Return(1));
psu2.clearFaults();
// STATUS_WORD MFR fault.
{
// First need it to return good status, then the fault
PMBusExpectations expectations;
setPMBusExpectations(mockPMBus, expectations);
EXPECT_CALL(mockPMBus, readString(READ_VIN, _))
.Times(1)
.WillOnce(Return("210000"));
psu2.analyze();
// Now STATUS_WORD with MFR fault bit on.
expectations.statusWordValue = (status_word::MFR_SPECIFIC_FAULT);
// STATUS_MFR bits on.
expectations.statusMFRValue = 0xFF;
for (auto x = 1; x <= DEGLITCH_LIMIT; x++)
{
setPMBusExpectations(mockPMBus, expectations);
EXPECT_CALL(mockPMBus, readString(READ_VIN, _))
.Times(1)
.WillOnce(Return("211000"));
psu2.analyze();
EXPECT_EQ(psu2.isPresent(), true);
EXPECT_EQ(psu2.isFaulted(), x >= DEGLITCH_LIMIT);
EXPECT_EQ(psu2.hasInputFault(), false);
EXPECT_EQ(psu2.hasMFRFault(), x >= DEGLITCH_LIMIT);
EXPECT_EQ(psu2.hasPSKillFault(), x >= DEGLITCH_LIMIT);
EXPECT_EQ(psu2.hasPS12VcsFault(), x >= DEGLITCH_LIMIT);
EXPECT_EQ(psu2.hasPSCS12VFault(), x >= DEGLITCH_LIMIT);
EXPECT_EQ(psu2.hasVINUVFault(), false);
EXPECT_EQ(psu2.hasCommFault(), false);
EXPECT_EQ(psu2.hasVoutOVFault(), false);
EXPECT_EQ(psu2.hasIoutOCFault(), false);
EXPECT_EQ(psu2.hasVoutUVFault(), false);
EXPECT_EQ(psu2.hasFanFault(), false);
EXPECT_EQ(psu2.hasTempFault(), false);
EXPECT_EQ(psu2.hasPgoodFault(), false);
}
}
EXPECT_CALL(mockPMBus, read(READ_VIN, _, _)).Times(1).WillOnce(Return(1));
psu2.clearFaults();
// Temperature fault.
{
// First STATUS_WORD with no bits set, then with temperature fault.
PMBusExpectations expectations;
setPMBusExpectations(mockPMBus, expectations);
EXPECT_CALL(mockPMBus, readString(READ_VIN, _))
.Times(1)
.WillOnce(Return("212000"));
psu2.analyze();
// STATUS_WORD with temperature fault bit on.
expectations.statusWordValue = (status_word::TEMPERATURE_FAULT_WARN);
// STATUS_TEMPERATURE with fault bit(s) on.
expectations.statusTempValue = 0x10;
for (auto x = 1; x <= DEGLITCH_LIMIT; x++)
{
setPMBusExpectations(mockPMBus, expectations);
EXPECT_CALL(mockPMBus, readString(READ_VIN, _))
.Times(1)
.WillOnce(Return("213000"));
psu2.analyze();
EXPECT_EQ(psu2.isPresent(), true);
EXPECT_EQ(psu2.isFaulted(), x >= DEGLITCH_LIMIT);
EXPECT_EQ(psu2.hasInputFault(), false);
EXPECT_EQ(psu2.hasMFRFault(), false);
EXPECT_EQ(psu2.hasVINUVFault(), false);
EXPECT_EQ(psu2.hasCommFault(), false);
EXPECT_EQ(psu2.hasVoutOVFault(), false);
EXPECT_EQ(psu2.hasIoutOCFault(), false);
EXPECT_EQ(psu2.hasVoutUVFault(), false);
EXPECT_EQ(psu2.hasFanFault(), false);
EXPECT_EQ(psu2.hasTempFault(), x >= DEGLITCH_LIMIT);
EXPECT_EQ(psu2.hasPgoodFault(), false);
EXPECT_EQ(psu2.hasPSKillFault(), false);
EXPECT_EQ(psu2.hasPS12VcsFault(), false);
EXPECT_EQ(psu2.hasPSCS12VFault(), false);
}
}
EXPECT_CALL(mockPMBus, read(READ_VIN, _, _)).Times(1).WillOnce(Return(1));
psu2.clearFaults();
// CML fault
{
// First STATUS_WORD wit no bits set, then with CML fault.
PMBusExpectations expectations;
setPMBusExpectations(mockPMBus, expectations);
EXPECT_CALL(mockPMBus, readString(READ_VIN, _))
.Times(1)
.WillOnce(Return("214000"));
psu2.analyze();
// STATUS_WORD with CML fault bit on.
expectations.statusWordValue = (status_word::CML_FAULT);
// Turn on STATUS_CML fault bit(s)
expectations.statusCMLValue = 0xFF;
for (auto x = 1; x <= DEGLITCH_LIMIT; x++)
{
setPMBusExpectations(mockPMBus, expectations);
EXPECT_CALL(mockPMBus, readString(READ_VIN, _))
.Times(1)
.WillOnce(Return("215000"));
psu2.analyze();
EXPECT_EQ(psu2.isPresent(), true);
EXPECT_EQ(psu2.isFaulted(), x >= DEGLITCH_LIMIT);
EXPECT_EQ(psu2.hasCommFault(), x >= DEGLITCH_LIMIT);
EXPECT_EQ(psu2.hasInputFault(), false);
EXPECT_EQ(psu2.hasMFRFault(), false);
EXPECT_EQ(psu2.hasVINUVFault(), false);
EXPECT_EQ(psu2.hasVoutOVFault(), false);
EXPECT_EQ(psu2.hasIoutOCFault(), false);
EXPECT_EQ(psu2.hasVoutUVFault(), false);
EXPECT_EQ(psu2.hasFanFault(), false);
EXPECT_EQ(psu2.hasTempFault(), false);
EXPECT_EQ(psu2.hasPgoodFault(), false);
EXPECT_EQ(psu2.hasPSKillFault(), false);
EXPECT_EQ(psu2.hasPS12VcsFault(), false);
EXPECT_EQ(psu2.hasPSCS12VFault(), false);
}
}
EXPECT_CALL(mockPMBus, read(READ_VIN, _, _)).Times(1).WillOnce(Return(1));
psu2.clearFaults();
// VOUT_OV_FAULT fault
{
// First STATUS_WORD with no bits set, then with VOUT/VOUT_OV fault.
PMBusExpectations expectations;
setPMBusExpectations(mockPMBus, expectations);
EXPECT_CALL(mockPMBus, readString(READ_VIN, _))
.Times(1)
.WillOnce(Return("216000"));
psu2.analyze();
// STATUS_WORD with VOUT/VOUT_OV fault.
expectations.statusWordValue =
((status_word::VOUT_FAULT) | (status_word::VOUT_OV_FAULT));
// Turn on STATUS_VOUT fault bit(s)
expectations.statusVOUTValue = 0xA0;
for (auto x = 1; x <= DEGLITCH_LIMIT; x++)
{
// STATUS_TEMPERATURE don't care (default)
setPMBusExpectations(mockPMBus, expectations);
EXPECT_CALL(mockPMBus, readString(READ_VIN, _))
.Times(1)
.WillOnce(Return("217000"));
psu2.analyze();
EXPECT_EQ(psu2.isPresent(), true);
EXPECT_EQ(psu2.isFaulted(), x >= DEGLITCH_LIMIT);
EXPECT_EQ(psu2.hasInputFault(), false);
EXPECT_EQ(psu2.hasMFRFault(), false);
EXPECT_EQ(psu2.hasVINUVFault(), false);
EXPECT_EQ(psu2.hasCommFault(), false);
EXPECT_EQ(psu2.hasVoutOVFault(), x >= DEGLITCH_LIMIT);
EXPECT_EQ(psu2.hasVoutUVFault(), false);
EXPECT_EQ(psu2.hasIoutOCFault(), false);
EXPECT_EQ(psu2.hasFanFault(), false);
EXPECT_EQ(psu2.hasTempFault(), false);
EXPECT_EQ(psu2.hasPgoodFault(), false);
EXPECT_EQ(psu2.hasPSKillFault(), false);
EXPECT_EQ(psu2.hasPS12VcsFault(), false);
EXPECT_EQ(psu2.hasPSCS12VFault(), false);
}
}
// IOUT_OC_FAULT fault
{
// First STATUS_WORD with no bits set, then with IOUT_OC fault.
PMBusExpectations expectations;
setPMBusExpectations(mockPMBus, expectations);
EXPECT_CALL(mockPMBus, readString(READ_VIN, _))
.Times(1)
.WillOnce(Return("218000"));
psu2.analyze();
// STATUS_WORD with IOUT_OC fault.
expectations.statusWordValue = status_word::IOUT_OC_FAULT;
// Turn on STATUS_IOUT fault bit(s)
expectations.statusIOUTValue = 0x88;
for (auto x = 1; x <= DEGLITCH_LIMIT; x++)
{
setPMBusExpectations(mockPMBus, expectations);
EXPECT_CALL(mockPMBus, readString(READ_VIN, _))
.Times(1)
.WillOnce(Return("219000"));
psu2.analyze();
EXPECT_EQ(psu2.isPresent(), true);
EXPECT_EQ(psu2.isFaulted(), x >= DEGLITCH_LIMIT);
EXPECT_EQ(psu2.hasInputFault(), false);
EXPECT_EQ(psu2.hasMFRFault(), false);
EXPECT_EQ(psu2.hasVINUVFault(), false);
EXPECT_EQ(psu2.hasCommFault(), false);
EXPECT_EQ(psu2.hasVoutOVFault(), false);
EXPECT_EQ(psu2.hasIoutOCFault(), x >= DEGLITCH_LIMIT);
EXPECT_EQ(psu2.hasVoutUVFault(), false);
EXPECT_EQ(psu2.hasFanFault(), false);
EXPECT_EQ(psu2.hasTempFault(), false);
EXPECT_EQ(psu2.hasPgoodFault(), false);
EXPECT_EQ(psu2.hasPSKillFault(), false);
EXPECT_EQ(psu2.hasPS12VcsFault(), false);
EXPECT_EQ(psu2.hasPSCS12VFault(), false);
}
}
// VOUT_UV_FAULT
{
// First STATUS_WORD with no bits set, then with VOUT fault.
PMBusExpectations expectations;
setPMBusExpectations(mockPMBus, expectations);
EXPECT_CALL(mockPMBus, readString(READ_VIN, _))
.Times(1)
.WillOnce(Return("220000"));
psu2.analyze();
// Change STATUS_WORD to indicate VOUT fault.
expectations.statusWordValue = (status_word::VOUT_FAULT);
// Turn on STATUS_VOUT fault bit(s)
expectations.statusVOUTValue = 0x30;
for (auto x = 1; x <= DEGLITCH_LIMIT; x++)
{
setPMBusExpectations(mockPMBus, expectations);
EXPECT_CALL(mockPMBus, readString(READ_VIN, _))
.Times(1)
.WillOnce(Return("221000"));
psu2.analyze();
EXPECT_EQ(psu2.isPresent(), true);
EXPECT_EQ(psu2.isFaulted(), x >= DEGLITCH_LIMIT);
EXPECT_EQ(psu2.hasInputFault(), false);
EXPECT_EQ(psu2.hasMFRFault(), false);
EXPECT_EQ(psu2.hasVINUVFault(), false);
EXPECT_EQ(psu2.hasCommFault(), false);
EXPECT_EQ(psu2.hasVoutOVFault(), false);
EXPECT_EQ(psu2.hasIoutOCFault(), false);
EXPECT_EQ(psu2.hasVoutUVFault(), x >= DEGLITCH_LIMIT);
EXPECT_EQ(psu2.hasFanFault(), false);
EXPECT_EQ(psu2.hasTempFault(), false);
EXPECT_EQ(psu2.hasPgoodFault(), false);
EXPECT_EQ(psu2.hasPSKillFault(), false);
EXPECT_EQ(psu2.hasPS12VcsFault(), false);
EXPECT_EQ(psu2.hasPSCS12VFault(), false);
}
}
// Fan fault
{
// First STATUS_WORD with no bits set, then with fan fault.
PMBusExpectations expectations;
setPMBusExpectations(mockPMBus, expectations);
EXPECT_CALL(mockPMBus, readString(READ_VIN, _))
.Times(1)
.WillOnce(Return("222000"));
psu2.analyze();
expectations.statusWordValue = (status_word::FAN_FAULT);
// STATUS_FANS_1_2 with fan 1 warning & fault bits on.
expectations.statusFans12Value = 0xA0;
for (auto x = 1; x <= DEGLITCH_LIMIT; x++)
{
setPMBusExpectations(mockPMBus, expectations);
EXPECT_CALL(mockPMBus, readString(READ_VIN, _))
.Times(1)
.WillOnce(Return("223000"));
psu2.analyze();
EXPECT_EQ(psu2.isPresent(), true);
EXPECT_EQ(psu2.isFaulted(), x >= DEGLITCH_LIMIT);
EXPECT_EQ(psu2.hasFanFault(), x >= DEGLITCH_LIMIT);
EXPECT_EQ(psu2.hasInputFault(), false);
EXPECT_EQ(psu2.hasMFRFault(), false);
EXPECT_EQ(psu2.hasVINUVFault(), false);
EXPECT_EQ(psu2.hasCommFault(), false);
EXPECT_EQ(psu2.hasVoutOVFault(), false);
EXPECT_EQ(psu2.hasIoutOCFault(), false);
EXPECT_EQ(psu2.hasVoutUVFault(), false);
EXPECT_EQ(psu2.hasTempFault(), false);
EXPECT_EQ(psu2.hasPgoodFault(), false);
EXPECT_EQ(psu2.hasPSKillFault(), false);
EXPECT_EQ(psu2.hasPS12VcsFault(), false);
EXPECT_EQ(psu2.hasPSCS12VFault(), false);
}
}
// PGOOD/OFF fault. Deglitched, needs to reach DEGLITCH_LIMIT.
{
// First STATUS_WORD with no bits set.
PMBusExpectations expectations;
setPMBusExpectations(mockPMBus, expectations);
EXPECT_CALL(mockPMBus, readString(READ_VIN, _))
.Times(1)
.WillOnce(Return("123000"));
psu2.analyze();
EXPECT_EQ(psu2.isFaulted(), false);
// POWER_GOOD# inactive, and OFF bit on.
expectations.statusWordValue =
((status_word::POWER_GOOD_NEGATED) | (status_word::UNIT_IS_OFF));
for (auto x = 1; x <= DEGLITCH_LIMIT; x++)
{
// STATUS_INPUT, STATUS_MFR, STATUS_CML, STATUS_VOUT, and
// STATUS_TEMPERATURE: Don't care if bits set or not (defaults).
setPMBusExpectations(mockPMBus, expectations);
EXPECT_CALL(mockPMBus, readString(READ_VIN, _))
.Times(1)
.WillOnce(Return("124000"));
psu2.analyze();
EXPECT_EQ(psu2.isPresent(), true);
EXPECT_EQ(psu2.isFaulted(), x >= DEGLITCH_LIMIT);
EXPECT_EQ(psu2.hasInputFault(), false);
EXPECT_EQ(psu2.hasMFRFault(), false);
EXPECT_EQ(psu2.hasVINUVFault(), false);
EXPECT_EQ(psu2.hasCommFault(), false);
EXPECT_EQ(psu2.hasVoutOVFault(), false);
EXPECT_EQ(psu2.hasVoutUVFault(), false);
EXPECT_EQ(psu2.hasIoutOCFault(), false);
EXPECT_EQ(psu2.hasFanFault(), false);
EXPECT_EQ(psu2.hasTempFault(), false);
EXPECT_EQ(psu2.hasPgoodFault(), x >= DEGLITCH_LIMIT);
}
}
// TODO: ReadFailure
}
TEST_F(PowerSupplyTests, OnOffConfig)
{
auto bus = sdbusplus::bus::new_default();
uint8_t data = 0x15;
// Test where PSU is NOT present
try
{
// Assume GPIO presence, not inventory presence?
PowerSupply psu{bus, PSUInventoryPath, 4, 0x69, PSUGPIOLineName};
MockedGPIOInterface* mockPresenceGPIO =
static_cast<MockedGPIOInterface*>(psu.getPresenceGPIO());
ON_CALL(*mockPresenceGPIO, read()).WillByDefault(Return(0));
MockedPMBus& mockPMBus = static_cast<MockedPMBus&>(psu.getPMBus());
// Constructor should set initial presence, default read returns 0.
// If it is not present, I should not be trying to write to it.
EXPECT_CALL(mockPMBus, writeBinary(_, _, _)).Times(0);
psu.onOffConfig(data);
}
catch (...)
{}
// Test where PSU is present
try
{
// Assume GPIO presence, not inventory presence?
PowerSupply psu{bus, PSUInventoryPath, 5, 0x6a, PSUGPIOLineName};
MockedGPIOInterface* mockPresenceGPIO =
static_cast<MockedGPIOInterface*>(psu.getPresenceGPIO());
// There will potentially be multiple calls, we want it to continue
// returning 1 for the GPIO read to keep the power supply present.
EXPECT_CALL(*mockPresenceGPIO, read()).WillRepeatedly(Return(1));
MockedPMBus& mockPMBus = static_cast<MockedPMBus&>(psu.getPMBus());
setMissingToPresentExpects(mockPMBus, mockedUtil);
// If I am calling analyze(), I should probably give it good data.
// STATUS_WORD 0x0000 is powered on, no faults.
PMBusExpectations expectations;
setPMBusExpectations(mockPMBus, expectations);
EXPECT_CALL(mockPMBus, readString(READ_VIN, _))
.Times(1)
.WillOnce(Return("205000"));
psu.analyze();
// I definitely should be writting ON_OFF_CONFIG if I call the function
EXPECT_CALL(mockPMBus, writeBinary(ON_OFF_CONFIG, ElementsAre(0x15),
Type::HwmonDeviceDebug))
.Times(1);
psu.onOffConfig(data);
}
catch (...)
{}
}
TEST_F(PowerSupplyTests, ClearFaults)
{
auto bus = sdbusplus::bus::new_default();
PowerSupply psu{bus, PSUInventoryPath, 13, 0x68, PSUGPIOLineName};
MockedGPIOInterface* mockPresenceGPIO =
static_cast<MockedGPIOInterface*>(psu.getPresenceGPIO());
// Always return 1 to indicate present.
// Each analyze() call will trigger a read of the presence GPIO.
EXPECT_CALL(*mockPresenceGPIO, read()).WillRepeatedly(Return(1));
MockedPMBus& mockPMBus = static_cast<MockedPMBus&>(psu.getPMBus());
setMissingToPresentExpects(mockPMBus, mockedUtil);
// STATUS_WORD 0x0000 is powered on, no faults.
PMBusExpectations expectations;
setPMBusExpectations(mockPMBus, expectations);
EXPECT_CALL(mockPMBus, readString(READ_VIN, _))
.Times(1)
.WillOnce(Return("207000"));
psu.analyze();
EXPECT_EQ(psu.isPresent(), true);
EXPECT_EQ(psu.isFaulted(), false);
EXPECT_EQ(psu.hasInputFault(), false);
EXPECT_EQ(psu.hasMFRFault(), false);
EXPECT_EQ(psu.hasVINUVFault(), false);
EXPECT_EQ(psu.hasCommFault(), false);
EXPECT_EQ(psu.hasVoutOVFault(), false);
EXPECT_EQ(psu.hasIoutOCFault(), false);
EXPECT_EQ(psu.hasVoutUVFault(), false);
EXPECT_EQ(psu.hasFanFault(), false);
EXPECT_EQ(psu.hasTempFault(), false);
EXPECT_EQ(psu.hasPgoodFault(), false);
EXPECT_EQ(psu.hasPSKillFault(), false);
EXPECT_EQ(psu.hasPS12VcsFault(), false);
EXPECT_EQ(psu.hasPSCS12VFault(), false);
// STATUS_WORD with fault bits galore!
expectations.statusWordValue = 0xFFFF;
// STATUS_INPUT with fault bits on.
expectations.statusInputValue = 0xFF;
// STATUS_MFR_SPEFIC with bits on.
expectations.statusMFRValue = 0xFF;
// STATUS_CML with bits on.
expectations.statusCMLValue = 0xFF;
// STATUS_VOUT with bits on.
expectations.statusVOUTValue = 0xFF;
// STATUS_IOUT with bits on.
expectations.statusIOUTValue = 0xFF;
// STATUS_FANS_1_2 with bits on.
expectations.statusFans12Value = 0xFF;
// STATUS_TEMPERATURE with bits on.
expectations.statusTempValue = 0xFF;
for (auto x = 1; x <= DEGLITCH_LIMIT; x++)
{
setPMBusExpectations(mockPMBus, expectations);
EXPECT_CALL(mockPMBus, readString(READ_VIN, _))
.Times(1)
.WillOnce(Return("0"));
psu.analyze();
EXPECT_EQ(psu.isPresent(), true);
// Cannot have VOUT_OV_FAULT and VOUT_UV_FAULT.
// Rely on HasVoutUVFault() to verify this sets and clears.
EXPECT_EQ(psu.hasVoutUVFault(), false);
// All faults are deglitched up to DEGLITCH_LIMIT
EXPECT_EQ(psu.isFaulted(), x >= DEGLITCH_LIMIT);
EXPECT_EQ(psu.hasInputFault(), x >= DEGLITCH_LIMIT);
EXPECT_EQ(psu.hasMFRFault(), x >= DEGLITCH_LIMIT);
EXPECT_EQ(psu.hasVINUVFault(), x >= DEGLITCH_LIMIT);
EXPECT_EQ(psu.hasCommFault(), x >= DEGLITCH_LIMIT);
EXPECT_EQ(psu.hasVoutOVFault(), x >= DEGLITCH_LIMIT);
EXPECT_EQ(psu.hasIoutOCFault(), x >= DEGLITCH_LIMIT);
EXPECT_EQ(psu.hasFanFault(), x >= DEGLITCH_LIMIT);
EXPECT_EQ(psu.hasTempFault(), x >= DEGLITCH_LIMIT);
EXPECT_EQ(psu.hasPgoodFault(), x >= DEGLITCH_LIMIT);
EXPECT_EQ(psu.hasPSKillFault(), x >= DEGLITCH_LIMIT);
EXPECT_EQ(psu.hasPS12VcsFault(), x >= DEGLITCH_LIMIT);
EXPECT_EQ(psu.hasPSCS12VFault(), x >= DEGLITCH_LIMIT);
}
EXPECT_CALL(mockPMBus, read(READ_VIN, _, _))
.Times(1)
.WillOnce(Return(207000));
psu.clearFaults();
EXPECT_EQ(psu.isPresent(), true);
EXPECT_EQ(psu.isFaulted(), false);
EXPECT_EQ(psu.hasInputFault(), false);
EXPECT_EQ(psu.hasMFRFault(), false);
EXPECT_EQ(psu.hasVINUVFault(), false);
EXPECT_EQ(psu.hasCommFault(), false);
EXPECT_EQ(psu.hasVoutOVFault(), false);
EXPECT_EQ(psu.hasIoutOCFault(), false);
EXPECT_EQ(psu.hasVoutUVFault(), false);
EXPECT_EQ(psu.hasFanFault(), false);
EXPECT_EQ(psu.hasTempFault(), false);
EXPECT_EQ(psu.hasPgoodFault(), false);
EXPECT_EQ(psu.hasPSKillFault(), false);
EXPECT_EQ(psu.hasPS12VcsFault(), false);
EXPECT_EQ(psu.hasPSCS12VFault(), false);
// Faults clear on READ_VIN 0 -> !0
// STATUS_WORD with fault bits galore!
expectations.statusWordValue = 0xFFFF;
// STATUS_INPUT with fault bits on.
expectations.statusInputValue = 0xFF;
// STATUS_MFR_SPEFIC with bits on.
expectations.statusMFRValue = 0xFF;
// STATUS_CML with bits on.
expectations.statusCMLValue = 0xFF;
// STATUS_VOUT with bits on.
expectations.statusVOUTValue = 0xFF;
// STATUS_IOUT with bits on.
expectations.statusIOUTValue = 0xFF;
// STATUS_FANS_1_2 with bits on.
expectations.statusFans12Value = 0xFF;
// STATUS_TEMPERATURE with bits on.
expectations.statusTempValue = 0xFF;
// All faults degltiched now. Check for false before limit above.
for (auto x = 1; x <= DEGLITCH_LIMIT; x++)
{
setPMBusExpectations(mockPMBus, expectations);
EXPECT_CALL(mockPMBus, readString(READ_VIN, _))
.Times(1)
.WillOnce(Return("0"));
psu.analyze();
}
EXPECT_EQ(psu.isPresent(), true);
EXPECT_EQ(psu.isFaulted(), true);
EXPECT_EQ(psu.hasInputFault(), true);
EXPECT_EQ(psu.hasMFRFault(), true);
EXPECT_EQ(psu.hasVINUVFault(), true);
// True due to CML fault bits on
EXPECT_EQ(psu.hasCommFault(), true);
EXPECT_EQ(psu.hasVoutOVFault(), true);
EXPECT_EQ(psu.hasIoutOCFault(), true);
// Cannot have VOUT_OV_FAULT and VOUT_UV_FAULT.
// Rely on HasVoutUVFault() to verify this sets and clears.
EXPECT_EQ(psu.hasVoutUVFault(), false);
EXPECT_EQ(psu.hasFanFault(), true);
EXPECT_EQ(psu.hasTempFault(), true);
EXPECT_EQ(psu.hasPgoodFault(), true);
EXPECT_EQ(psu.hasPSKillFault(), true);
EXPECT_EQ(psu.hasPS12VcsFault(), true);
EXPECT_EQ(psu.hasPSCS12VFault(), true);
// STATUS_WORD with INPUT/VIN_UV fault bits off.
expectations.statusWordValue = 0xDFF7;
// STATUS_INPUT with VIN_UV_WARNING, VIN_UV_FAULT, and Unit Off For
// Insufficient Input Voltage bits off.
expectations.statusInputValue = 0xC7;
setPMBusExpectations(mockPMBus, expectations);
// READ_VIN back in range.
EXPECT_CALL(mockPMBus, readString(READ_VIN, _))
.Times(1)
.WillOnce(Return("206000"));
EXPECT_CALL(mockPMBus, read(READ_VIN, _, _)).Times(1).WillOnce(Return(0));
psu.analyze();
EXPECT_EQ(psu.isPresent(), true);
EXPECT_EQ(psu.isFaulted(), false);
EXPECT_EQ(psu.hasInputFault(), false);
EXPECT_EQ(psu.hasMFRFault(), false);
EXPECT_EQ(psu.hasVINUVFault(), false);
EXPECT_EQ(psu.hasCommFault(), false);
EXPECT_EQ(psu.hasVoutOVFault(), false);
EXPECT_EQ(psu.hasIoutOCFault(), false);
EXPECT_EQ(psu.hasVoutUVFault(), false);
EXPECT_EQ(psu.hasFanFault(), false);
EXPECT_EQ(psu.hasTempFault(), false);
EXPECT_EQ(psu.hasPgoodFault(), false);
EXPECT_EQ(psu.hasPSKillFault(), false);
EXPECT_EQ(psu.hasPS12VcsFault(), false);
EXPECT_EQ(psu.hasPSCS12VFault(), false);
// TODO: Faults clear on missing/present?
}
TEST_F(PowerSupplyTests, UpdateInventory)
{
auto bus = sdbusplus::bus::new_default();
try
{
PowerSupply psu{bus, PSUInventoryPath, 3, 0x68, PSUGPIOLineName};
MockedPMBus& mockPMBus = static_cast<MockedPMBus&>(psu.getPMBus());
// If it is not present, I should not be trying to read a string
EXPECT_CALL(mockPMBus, readString(_, _)).Times(0);
psu.updateInventory();
}
catch (...)
{
ADD_FAILURE() << "Should not have caught exception.";
}
try
{
PowerSupply psu{bus, PSUInventoryPath, 13, 0x69, PSUGPIOLineName};
MockedGPIOInterface* mockPresenceGPIO =
static_cast<MockedGPIOInterface*>(psu.getPresenceGPIO());
// GPIO read return 1 to indicate present.
EXPECT_CALL(*mockPresenceGPIO, read()).Times(1).WillOnce(Return(1));
MockedPMBus& mockPMBus = static_cast<MockedPMBus&>(psu.getPMBus());
setMissingToPresentExpects(mockPMBus, mockedUtil);
// STATUS_WORD 0x0000 is powered on, no faults.
PMBusExpectations expectations;
setPMBusExpectations(mockPMBus, expectations);
// Call to analyze will read voltage, trigger clear faults for 0 to
// within range.
EXPECT_CALL(mockPMBus, readString(READ_VIN, _))
.Times(1)
.WillOnce(Return("123456"));
psu.analyze();
EXPECT_CALL(mockPMBus, readString(_, _)).WillRepeatedly(Return(""));
psu.updateInventory();
#if IBM_VPD
EXPECT_CALL(mockPMBus, readString(_, _))
.WillOnce(Return("CCIN"))
.WillOnce(Return("PN3456"))
.WillOnce(Return("FN3456"))
.WillOnce(Return("HEADER"))
.WillOnce(Return("SN3456"))
.WillOnce(Return("FW3456"));
#endif
psu.updateInventory();
// TODO: D-Bus mocking to verify values stored on D-Bus (???)
}
catch (...)
{
ADD_FAILURE() << "Should not have caught exception.";
}
}
TEST_F(PowerSupplyTests, IsPresent)
{
auto bus = sdbusplus::bus::new_default();
PowerSupply psu{bus, PSUInventoryPath, 3, 0x68, PSUGPIOLineName};
MockedGPIOInterface* mockPresenceGPIO =
static_cast<MockedGPIOInterface*>(psu.getPresenceGPIO());
EXPECT_EQ(psu.isPresent(), false);
// Change GPIO read to return 1 to indicate present.
EXPECT_CALL(*mockPresenceGPIO, read()).Times(1).WillOnce(Return(1));
// Call to analyze() will update to present, that will trigger updating
// to the correct/latest HWMON directory, in case it changes.
MockedPMBus& mockPMBus = static_cast<MockedPMBus&>(psu.getPMBus());
setMissingToPresentExpects(mockPMBus, mockedUtil);
// Call to analyze things will trigger read of STATUS_WORD and READ_VIN.
// Default expectations will be on, no faults.
PMBusExpectations expectations;
setPMBusExpectations(mockPMBus, expectations);
// Give it an input voltage in the 100-volt range.
EXPECT_CALL(mockPMBus, readString(READ_VIN, _))
.Times(1)
.WillOnce(Return("123456"));
psu.analyze();
EXPECT_EQ(psu.isPresent(), true);
}
TEST_F(PowerSupplyTests, IsFaulted)
{
auto bus = sdbusplus::bus::new_default();
PowerSupply psu{bus, PSUInventoryPath, 11, 0x6f, PSUGPIOLineName};
MockedGPIOInterface* mockPresenceGPIO =
static_cast<MockedGPIOInterface*>(psu.getPresenceGPIO());
// Always return 1 to indicate present.
EXPECT_CALL(*mockPresenceGPIO, read()).WillRepeatedly(Return(1));
MockedPMBus& mockPMBus = static_cast<MockedPMBus&>(psu.getPMBus());
setMissingToPresentExpects(mockPMBus, mockedUtil);
// Call to analyze things will trigger read of STATUS_WORD and READ_VIN.
// Default expectations will be on, no faults.
PMBusExpectations expectations;
setPMBusExpectations(mockPMBus, expectations);
// Give it an input voltage in the 100-volt range.
EXPECT_CALL(mockPMBus, readString(READ_VIN, _))
.Times(1)
.WillOnce(Return("124680"));
psu.analyze();
EXPECT_EQ(psu.isFaulted(), false);
// STATUS_WORD with fault bits on.
expectations.statusWordValue = 0xFFFF;
// STATUS_INPUT with fault bits on.
expectations.statusInputValue = 0xFF;
// STATUS_MFR_SPECIFIC with faults bits on.
expectations.statusMFRValue = 0xFF;
// STATUS_CML with faults bits on.
expectations.statusCMLValue = 0xFF;
// STATUS_VOUT with fault bits on.
expectations.statusVOUTValue = 0xFF;
// STATUS_IOUT with fault bits on.
expectations.statusIOUTValue = 0xFF;
// STATUS_FANS_1_2 with bits on.
expectations.statusFans12Value = 0xFF;
// STATUS_TEMPERATURE with fault bits on.
expectations.statusTempValue = 0xFF;
for (auto x = 1; x <= DEGLITCH_LIMIT; x++)
{
setPMBusExpectations(mockPMBus, expectations);
// Also get another read of READ_VIN.
EXPECT_CALL(mockPMBus, readString(READ_VIN, _))
.Times(1)
.WillOnce(Return("125790"));
psu.analyze();
EXPECT_EQ(psu.isFaulted(), x >= DEGLITCH_LIMIT);
}
}
TEST_F(PowerSupplyTests, HasInputFault)
{
auto bus = sdbusplus::bus::new_default();
PowerSupply psu{bus, PSUInventoryPath, 3, 0x68, PSUGPIOLineName};
MockedGPIOInterface* mockPresenceGPIO =
static_cast<MockedGPIOInterface*>(psu.getPresenceGPIO());
// Always return 1 to indicate present.
EXPECT_CALL(*mockPresenceGPIO, read()).WillRepeatedly(Return(1));
MockedPMBus& mockPMBus = static_cast<MockedPMBus&>(psu.getPMBus());
setMissingToPresentExpects(mockPMBus, mockedUtil);
// STATUS_WORD 0x0000 is powered on, no faults.
PMBusExpectations expectations;
setPMBusExpectations(mockPMBus, expectations);
// Analyze call will also need good READ_VIN value to check.
EXPECT_CALL(mockPMBus, readString(READ_VIN, _))
.Times(1)
.WillOnce(Return("201100"));
psu.analyze();
EXPECT_EQ(psu.hasInputFault(), false);
// STATUS_WORD with input fault/warn on.
expectations.statusWordValue = (status_word::INPUT_FAULT_WARN);
// STATUS_INPUT with an input fault bit on.
expectations.statusInputValue = 0x80;
for (auto x = 1; x <= DEGLITCH_LIMIT; x++)
{
setPMBusExpectations(mockPMBus, expectations);
// Analyze call will also need good READ_VIN value to check.
EXPECT_CALL(mockPMBus, readString(READ_VIN, _))
.Times(1)
.WillOnce(Return("201200"));
psu.analyze();
EXPECT_EQ(psu.hasInputFault(), x >= DEGLITCH_LIMIT);
}
// STATUS_WORD with no bits on.
expectations.statusWordValue = 0;
setPMBusExpectations(mockPMBus, expectations);
// Analyze call will also need good READ_VIN value to check.
EXPECT_CALL(mockPMBus, readString(READ_VIN, _))
.Times(1)
.WillOnce(Return("201300"));
psu.analyze();
EXPECT_EQ(psu.hasInputFault(), false);
}
TEST_F(PowerSupplyTests, HasMFRFault)
{
auto bus = sdbusplus::bus::new_default();
PowerSupply psu{bus, PSUInventoryPath, 3, 0x68, PSUGPIOLineName};
MockedGPIOInterface* mockPresenceGPIO =
static_cast<MockedGPIOInterface*>(psu.getPresenceGPIO());
// Always return 1 to indicate present.
EXPECT_CALL(*mockPresenceGPIO, read()).WillRepeatedly(Return(1));
MockedPMBus& mockPMBus = static_cast<MockedPMBus&>(psu.getPMBus());
setMissingToPresentExpects(mockPMBus, mockedUtil);
// First return STATUS_WORD with no bits on.
// STATUS_WORD 0x0000 is powered on, no faults.
PMBusExpectations expectations;
setPMBusExpectations(mockPMBus, expectations);
// Analyze call will also need good READ_VIN value to check.
EXPECT_CALL(mockPMBus, readString(READ_VIN, _))
.Times(1)
.WillOnce(Return("202100"));
psu.analyze();
EXPECT_EQ(psu.hasMFRFault(), false);
// Next return STATUS_WORD with MFR fault bit on.
expectations.statusWordValue = (status_word::MFR_SPECIFIC_FAULT);
// STATUS_MFR_SPEFIC with bit(s) on.
expectations.statusMFRValue = 0xFF;
for (auto x = 1; x <= DEGLITCH_LIMIT; x++)
{
setPMBusExpectations(mockPMBus, expectations);
EXPECT_CALL(mockPMBus, readString(READ_VIN, _))
.Times(1)
.WillOnce(Return("202200"));
psu.analyze();
EXPECT_EQ(psu.hasMFRFault(), x >= DEGLITCH_LIMIT);
}
// Back to no bits on in STATUS_WORD
expectations.statusWordValue = 0;
setPMBusExpectations(mockPMBus, expectations);
EXPECT_CALL(mockPMBus, readString(READ_VIN, _))
.Times(1)
.WillOnce(Return("202300"));
psu.analyze();
EXPECT_EQ(psu.hasMFRFault(), false);
}
TEST_F(PowerSupplyTests, HasVINUVFault)
{
auto bus = sdbusplus::bus::new_default();
PowerSupply psu{bus, PSUInventoryPath, 3, 0x68, PSUGPIOLineName};
MockedGPIOInterface* mockPresenceGPIO =
static_cast<MockedGPIOInterface*>(psu.getPresenceGPIO());
// Always return 1 to indicate present.
EXPECT_CALL(*mockPresenceGPIO, read()).WillRepeatedly(Return(1));
MockedPMBus& mockPMBus = static_cast<MockedPMBus&>(psu.getPMBus());
setMissingToPresentExpects(mockPMBus, mockedUtil);
// Presence change from missing to present will trigger in1_input read in
// an attempt to get CLEAR_FAULTS called. Return value ignored.
// Zero to non-zero voltage, for missing/present change, triggers clear
// faults call again. Return value ignored.
// Fault (low voltage) to not faulted (voltage in range) triggers clear
// faults call a third time.
// STATUS_WORD 0x0000 is powered on, no faults.
PMBusExpectations expectations;
setPMBusExpectations(mockPMBus, expectations);
// Analyze call will also need good READ_VIN value to check.
EXPECT_CALL(mockPMBus, readString(READ_VIN, _))
.Times(1)
.WillOnce(Return("201100"));
psu.analyze();
EXPECT_EQ(psu.hasVINUVFault(), false);
// Turn fault on.
expectations.statusWordValue = (status_word::VIN_UV_FAULT);
// Curious disagreement between PMBus Spec. Part II Figure 16 and 33. Go by
// Figure 16, and assume bits on in STATUS_INPUT.
expectations.statusInputValue = 0x18;
for (auto x = 1; x <= DEGLITCH_LIMIT; x++)
{
setPMBusExpectations(mockPMBus, expectations);
// If there is a VIN_UV fault, fake reading voltage of less than 20V
EXPECT_CALL(mockPMBus, readString(READ_VIN, _))
.Times(1)
.WillOnce(Return("19876"));
psu.analyze();
EXPECT_EQ(psu.hasVINUVFault(), x >= DEGLITCH_LIMIT);
}
// Back to no fault bits on in STATUS_WORD
expectations.statusWordValue = 0;
setPMBusExpectations(mockPMBus, expectations);
// Updates now result in clearing faults if read voltage goes from below the
// minimum, to within a valid range.
EXPECT_CALL(mockPMBus, readString(READ_VIN, _))
.Times(1)
.WillOnce(Return("201300"));
// Went from below minimum to within range, expect CLEAR_FAULTS.
EXPECT_CALL(mockPMBus, read(READ_VIN, _, _)).Times(1).WillOnce(Return(3));
psu.analyze();
EXPECT_EQ(psu.hasVINUVFault(), false);
}
TEST_F(PowerSupplyTests, HasVoutOVFault)
{
auto bus = sdbusplus::bus::new_default();
PowerSupply psu{bus, PSUInventoryPath, 3, 0x69, PSUGPIOLineName};
MockedGPIOInterface* mockPresenceGPIO =
static_cast<MockedGPIOInterface*>(psu.getPresenceGPIO());
// Always return 1 to indicate present.
EXPECT_CALL(*mockPresenceGPIO, read()).WillRepeatedly(Return(1));
MockedPMBus& mockPMBus = static_cast<MockedPMBus&>(psu.getPMBus());
setMissingToPresentExpects(mockPMBus, mockedUtil);
// STATUS_WORD 0x0000 is powered on, no faults.
PMBusExpectations expectations;
setPMBusExpectations(mockPMBus, expectations);
// Call to analyze will trigger read of "in1_input" to check voltage.
// Initial value would be 0, so this read updates it to non-zero.
EXPECT_CALL(mockPMBus, readString(READ_VIN, _))
.Times(1)
.WillOnce(Return("202100"));
psu.analyze();
EXPECT_EQ(psu.hasVoutOVFault(), false);
// Turn fault on.
expectations.statusWordValue = (status_word::VOUT_OV_FAULT);
// STATUS_VOUT fault bit(s)
expectations.statusVOUTValue = 0x80;
for (auto x = 1; x <= DEGLITCH_LIMIT; x++)
{
setPMBusExpectations(mockPMBus, expectations);
EXPECT_CALL(mockPMBus, readString(READ_VIN, _))
.Times(1)
.WillOnce(Return("202200"));
psu.analyze();
EXPECT_EQ(psu.hasVoutOVFault(), x >= DEGLITCH_LIMIT);
}
// Back to no fault bits on in STATUS_WORD
expectations.statusWordValue = 0;
setPMBusExpectations(mockPMBus, expectations);
EXPECT_CALL(mockPMBus, readString(READ_VIN, _))
.Times(1)
.WillOnce(Return("202300"));
psu.analyze();
EXPECT_EQ(psu.hasVoutOVFault(), false);
}
TEST_F(PowerSupplyTests, HasIoutOCFault)
{
auto bus = sdbusplus::bus::new_default();
PowerSupply psu{bus, PSUInventoryPath, 3, 0x6d, PSUGPIOLineName};
MockedGPIOInterface* mockPresenceGPIO =
static_cast<MockedGPIOInterface*>(psu.getPresenceGPIO());
// Always return 1 to indicate present.
EXPECT_CALL(*mockPresenceGPIO, read()).WillRepeatedly(Return(1));
MockedPMBus& mockPMBus = static_cast<MockedPMBus&>(psu.getPMBus());
setMissingToPresentExpects(mockPMBus, mockedUtil);
// STATUS_WORD 0x0000 is powered on, no faults.
PMBusExpectations expectations;
setPMBusExpectations(mockPMBus, expectations);
// Call to analyze will trigger read of "in1_input" to check voltage.
// Initial value would be 0, so this read updates it to non-zero.
EXPECT_CALL(mockPMBus, readString(READ_VIN, _))
.Times(1)
.WillOnce(Return("203100"));
psu.analyze();
EXPECT_EQ(psu.hasIoutOCFault(), false);
// Turn fault on.
expectations.statusWordValue = status_word::IOUT_OC_FAULT;
// STATUS_IOUT fault bit(s)
expectations.statusIOUTValue = 0x88;
for (auto x = 1; x <= DEGLITCH_LIMIT; x++)
{
setPMBusExpectations(mockPMBus, expectations);
EXPECT_CALL(mockPMBus, readString(READ_VIN, _))
.Times(1)
.WillOnce(Return("203200"));
psu.analyze();
EXPECT_EQ(psu.hasIoutOCFault(), x >= DEGLITCH_LIMIT);
}
// Back to no fault bits on in STATUS_WORD
expectations.statusWordValue = 0;
setPMBusExpectations(mockPMBus, expectations);
EXPECT_CALL(mockPMBus, readString(READ_VIN, _))
.Times(1)
.WillOnce(Return("203300"));
psu.analyze();
EXPECT_EQ(psu.hasIoutOCFault(), false);
}
TEST_F(PowerSupplyTests, HasVoutUVFault)
{
auto bus = sdbusplus::bus::new_default();
PowerSupply psu{bus, PSUInventoryPath, 3, 0x6a, PSUGPIOLineName};
MockedGPIOInterface* mockPresenceGPIO =
static_cast<MockedGPIOInterface*>(psu.getPresenceGPIO());
// Always return 1 to indicate present.
EXPECT_CALL(*mockPresenceGPIO, read()).WillRepeatedly(Return(1));
MockedPMBus& mockPMBus = static_cast<MockedPMBus&>(psu.getPMBus());
setMissingToPresentExpects(mockPMBus, mockedUtil);
// STATUS_WORD 0x0000 is powered on, no faults.
PMBusExpectations expectations;
setPMBusExpectations(mockPMBus, expectations);
// Call to analyze will trigger read of "in1_input" to check voltage.
// Initial value would be 0, so this read updates it to non-zero.
EXPECT_CALL(mockPMBus, readString(READ_VIN, _))
.Times(1)
.WillOnce(Return("204100"));
psu.analyze();
EXPECT_EQ(psu.hasVoutUVFault(), false);
// Turn fault on.
expectations.statusWordValue = (status_word::VOUT_FAULT);
// STATUS_VOUT fault bit(s)
expectations.statusVOUTValue = 0x30;
for (auto x = 1; x <= DEGLITCH_LIMIT; x++)
{
setPMBusExpectations(mockPMBus, expectations);
EXPECT_CALL(mockPMBus, readString(READ_VIN, _))
.Times(1)
.WillOnce(Return("204200"));
psu.analyze();
EXPECT_EQ(psu.hasVoutUVFault(), x >= DEGLITCH_LIMIT);
}
// Back to no fault bits on in STATUS_WORD
expectations.statusWordValue = 0;
setPMBusExpectations(mockPMBus, expectations);
EXPECT_CALL(mockPMBus, readString(READ_VIN, _))
.Times(1)
.WillOnce(Return("204300"));
psu.analyze();
EXPECT_EQ(psu.hasVoutUVFault(), false);
}
TEST_F(PowerSupplyTests, HasFanFault)
{
auto bus = sdbusplus::bus::new_default();
PowerSupply psu{bus, PSUInventoryPath, 3, 0x6d, PSUGPIOLineName};
MockedGPIOInterface* mockPresenceGPIO =
static_cast<MockedGPIOInterface*>(psu.getPresenceGPIO());
// Always return 1 to indicate present.
EXPECT_CALL(*mockPresenceGPIO, read()).WillRepeatedly(Return(1));
MockedPMBus& mockPMBus = static_cast<MockedPMBus&>(psu.getPMBus());
setMissingToPresentExpects(mockPMBus, mockedUtil);
// STATUS_WORD 0x0000 is powered on, no faults.
PMBusExpectations expectations;
setPMBusExpectations(mockPMBus, expectations);
// Call to analyze will trigger read of "in1_input" to check voltage.
// Initial value would be 0, so this read updates it to non-zero.
EXPECT_CALL(mockPMBus, readString(READ_VIN, _))
.Times(1)
.WillOnce(Return("205100"));
psu.analyze();
EXPECT_EQ(psu.hasFanFault(), false);
// Turn fault on.
expectations.statusWordValue = (status_word::FAN_FAULT);
// STATUS_FANS_1_2 fault bit on (Fan 1 Fault)
expectations.statusFans12Value = 0x80;
for (auto x = 1; x <= DEGLITCH_LIMIT; x++)
{
setPMBusExpectations(mockPMBus, expectations);
// Call to analyze will trigger read of "in1_input" to check voltage.
EXPECT_CALL(mockPMBus, readString(READ_VIN, _))
.Times(1)
.WillOnce(Return("205200"));
psu.analyze();
EXPECT_EQ(psu.hasFanFault(), x >= DEGLITCH_LIMIT);
}
// Back to no fault bits on in STATUS_WORD
expectations.statusWordValue = 0;
setPMBusExpectations(mockPMBus, expectations);
// Call to analyze will trigger read of "in1_input" to check voltage.
EXPECT_CALL(mockPMBus, readString(READ_VIN, _))
.Times(1)
.WillOnce(Return("205300"));
psu.analyze();
EXPECT_EQ(psu.hasFanFault(), false);
}
TEST_F(PowerSupplyTests, HasTempFault)
{
auto bus = sdbusplus::bus::new_default();
PowerSupply psu{bus, PSUInventoryPath, 3, 0x6a, PSUGPIOLineName};
MockedGPIOInterface* mockPresenceGPIO =
static_cast<MockedGPIOInterface*>(psu.getPresenceGPIO());
// Always return 1 to indicate present.
EXPECT_CALL(*mockPresenceGPIO, read()).WillRepeatedly(Return(1));
MockedPMBus& mockPMBus = static_cast<MockedPMBus&>(psu.getPMBus());
setMissingToPresentExpects(mockPMBus, mockedUtil);
// STATUS_WORD 0x0000 is powered on, no faults.
PMBusExpectations expectations;
setPMBusExpectations(mockPMBus, expectations);
// Call to analyze will trigger read of "in1_input" to check voltage.
// Initial value would be 0, so this read updates it to non-zero.
EXPECT_CALL(mockPMBus, readString(READ_VIN, _))
.Times(1)
.WillOnce(Return("206100"));
psu.analyze();
EXPECT_EQ(psu.hasTempFault(), false);
// Turn fault on.
expectations.statusWordValue = (status_word::TEMPERATURE_FAULT_WARN);
// STATUS_TEMPERATURE fault bit on (OT Fault)
expectations.statusTempValue = 0x80;
for (auto x = 1; x <= DEGLITCH_LIMIT; x++)
{
setPMBusExpectations(mockPMBus, expectations);
// Call to analyze will trigger read of "in1_input" to check voltage.
EXPECT_CALL(mockPMBus, readString(READ_VIN, _))
.Times(1)
.WillOnce(Return("206200"));
psu.analyze();
EXPECT_EQ(psu.hasTempFault(), x >= DEGLITCH_LIMIT);
}
// Back to no fault bits on in STATUS_WORD
expectations.statusWordValue = 0;
setPMBusExpectations(mockPMBus, expectations);
// Call to analyze will trigger read of "in1_input" to check voltage.
EXPECT_CALL(mockPMBus, readString(READ_VIN, _))
.Times(1)
.WillOnce(Return("206300"));
psu.analyze();
EXPECT_EQ(psu.hasTempFault(), false);
}
TEST_F(PowerSupplyTests, HasPgoodFault)
{
auto bus = sdbusplus::bus::new_default();
PowerSupply psu{bus, PSUInventoryPath, 3, 0x6b, PSUGPIOLineName};
MockedGPIOInterface* mockPresenceGPIO =
static_cast<MockedGPIOInterface*>(psu.getPresenceGPIO());
// Always return 1 to indicate present.
EXPECT_CALL(*mockPresenceGPIO, read()).WillRepeatedly(Return(1));
MockedPMBus& mockPMBus = static_cast<MockedPMBus&>(psu.getPMBus());
setMissingToPresentExpects(mockPMBus, mockedUtil);
// STATUS_WORD 0x0000 is powered on, no faults.
PMBusExpectations expectations;
setPMBusExpectations(mockPMBus, expectations);
// Call to analyze will trigger read of "in1_input" to check voltage.
// Initial value would be 0, so this read updates it to non-zero.
EXPECT_CALL(mockPMBus, readString(READ_VIN, _))
.Times(1)
.WillOnce(Return("207100"));
psu.analyze();
EXPECT_EQ(psu.hasPgoodFault(), false);
// Setup another expectation of no faults.
setPMBusExpectations(mockPMBus, expectations);
// Call to analyze will trigger read of "in1_input" to check voltage.
EXPECT_CALL(mockPMBus, readString(READ_VIN, _))
.Times(1)
.WillOnce(Return("207200"));
psu.analyze();
EXPECT_EQ(psu.hasPgoodFault(), false);
// Setup another expectation of no faults.
setPMBusExpectations(mockPMBus, expectations);
// Call to analyze will trigger read of "in1_input" to check voltage.
EXPECT_CALL(mockPMBus, readString(READ_VIN, _))
.Times(1)
.WillOnce(Return("207300"));
psu.analyze();
EXPECT_EQ(psu.hasPgoodFault(), false);
// Turn PGOOD# off (fault on).
expectations.statusWordValue = (status_word::POWER_GOOD_NEGATED);
setPMBusExpectations(mockPMBus, expectations);
// Call to analyze will trigger read of "in1_input" to check voltage.
EXPECT_CALL(mockPMBus, readString(READ_VIN, _))
.Times(1)
.WillOnce(Return("207400"));
psu.analyze();
// Expect false until reaches DEGLITCH_LIMIT
EXPECT_EQ(psu.hasPgoodFault(), false);
setPMBusExpectations(mockPMBus, expectations);
EXPECT_CALL(mockPMBus, readString(READ_VIN, _))
.Times(1)
.WillOnce(Return("207500"));
psu.analyze();
// Expect false until reaches DEGLITCH_LIMIT
EXPECT_EQ(psu.hasPgoodFault(), false);
setPMBusExpectations(mockPMBus, expectations);
EXPECT_CALL(mockPMBus, readString(READ_VIN, _))
.Times(1)
.WillOnce(Return("207600"));
psu.analyze();
// DEGLITCH_LIMIT reached, expect true.
EXPECT_EQ(psu.hasPgoodFault(), true);
// Back to no fault bits on in STATUS_WORD
expectations.statusWordValue = 0;
setPMBusExpectations(mockPMBus, expectations);
// Call to analyze will trigger read of "in1_input" to check voltage.
EXPECT_CALL(mockPMBus, readString(READ_VIN, _))
.Times(1)
.WillOnce(Return("207700"));
psu.analyze();
EXPECT_EQ(psu.hasPgoodFault(), false);
// Turn OFF bit on
expectations.statusWordValue = (status_word::UNIT_IS_OFF);
setPMBusExpectations(mockPMBus, expectations);
// Call to analyze will trigger read of "in1_input" to check voltage.
EXPECT_CALL(mockPMBus, readString(READ_VIN, _))
.Times(1)
.WillOnce(Return("208100"));
psu.analyze();
EXPECT_EQ(psu.hasPgoodFault(), false);
setPMBusExpectations(mockPMBus, expectations);
EXPECT_CALL(mockPMBus, readString(READ_VIN, _))
.Times(1)
.WillOnce(Return("208200"));
psu.analyze();
EXPECT_EQ(psu.hasPgoodFault(), false);
setPMBusExpectations(mockPMBus, expectations);
EXPECT_CALL(mockPMBus, readString(READ_VIN, _))
.Times(1)
.WillOnce(Return("208300"));
psu.analyze();
EXPECT_EQ(psu.hasPgoodFault(), true);
// Back to no fault bits on in STATUS_WORD
expectations.statusWordValue = 0;
setPMBusExpectations(mockPMBus, expectations);
// Call to analyze will trigger read of "in1_input" to check voltage.
EXPECT_CALL(mockPMBus, readString(READ_VIN, _))
.Times(1)
.WillOnce(Return("208400"));
psu.analyze();
EXPECT_EQ(psu.hasPgoodFault(), false);
}
TEST_F(PowerSupplyTests, HasPSKillFault)
{
auto bus = sdbusplus::bus::new_default();
PowerSupply psu{bus, PSUInventoryPath, 4, 0x6d, PSUGPIOLineName};
MockedGPIOInterface* mockPresenceGPIO =
static_cast<MockedGPIOInterface*>(psu.getPresenceGPIO());
// Always return 1 to indicate present.
EXPECT_CALL(*mockPresenceGPIO, read()).WillRepeatedly(Return(1));
MockedPMBus& mockPMBus = static_cast<MockedPMBus&>(psu.getPMBus());
setMissingToPresentExpects(mockPMBus, mockedUtil);
// STATUS_WORD 0x0000 is powered on, no faults.
PMBusExpectations expectations;
setPMBusExpectations(mockPMBus, expectations);
// Call to analyze will trigger read of "in1_input" to check voltage.
// Initial value would be 0, so this read updates it to non-zero.
EXPECT_CALL(mockPMBus, readString(READ_VIN, _))
.Times(1)
.WillOnce(Return("208100"));
psu.analyze();
EXPECT_EQ(psu.hasPSKillFault(), false);
// Next return STATUS_WORD with MFR fault bit on.
expectations.statusWordValue = (status_word::MFR_SPECIFIC_FAULT);
// STATUS_MFR_SPEFIC with bit(s) on.
expectations.statusMFRValue = 0xFF;
// Deglitching faults, false until read the fault bits on up to the limit.
for (auto x = 1; x <= DEGLITCH_LIMIT; x++)
{
setPMBusExpectations(mockPMBus, expectations);
// Call to analyze will trigger read of "in1_input" to check voltage.
EXPECT_CALL(mockPMBus, readString(READ_VIN, _))
.Times(1)
.WillOnce(Return("208200"));
psu.analyze();
EXPECT_EQ(psu.hasPSKillFault(), x >= DEGLITCH_LIMIT);
}
// Back to no bits on in STATUS_WORD
expectations.statusWordValue = 0;
setPMBusExpectations(mockPMBus, expectations);
// Call to analyze will trigger read of "in1_input" to check voltage.
EXPECT_CALL(mockPMBus, readString(READ_VIN, _))
.Times(1)
.WillOnce(Return("208300"));
psu.analyze();
EXPECT_EQ(psu.hasPSKillFault(), false);
// Next return STATUS_WORD with MFR fault bit on.
expectations.statusWordValue = (status_word::MFR_SPECIFIC_FAULT);
// STATUS_MFR_SPEFIC with bit 4 on.
expectations.statusMFRValue = 0x10;
for (auto x = 1; x <= DEGLITCH_LIMIT; x++)
{
setPMBusExpectations(mockPMBus, expectations);
// Call to analyze will trigger read of "in1_input" to check voltage.
EXPECT_CALL(mockPMBus, readString(READ_VIN, _))
.Times(1)
.WillOnce(Return("208400"));
psu.analyze();
EXPECT_EQ(psu.hasPSKillFault(), x >= DEGLITCH_LIMIT);
}
// Back to no bits on in STATUS_WORD
expectations.statusWordValue = 0;
setPMBusExpectations(mockPMBus, expectations);
// Call to analyze will trigger read of "in1_input" to check voltage.
EXPECT_CALL(mockPMBus, readString(READ_VIN, _))
.Times(1)
.WillOnce(Return("208500"));
psu.analyze();
EXPECT_EQ(psu.hasPSKillFault(), false);
}
TEST_F(PowerSupplyTests, HasPS12VcsFault)
{
auto bus = sdbusplus::bus::new_default();
PowerSupply psu{bus, PSUInventoryPath, 5, 0x6e, PSUGPIOLineName};
MockedGPIOInterface* mockPresenceGPIO =
static_cast<MockedGPIOInterface*>(psu.getPresenceGPIO());
// Always return 1 to indicate present.
EXPECT_CALL(*mockPresenceGPIO, read()).WillRepeatedly(Return(1));
MockedPMBus& mockPMBus = static_cast<MockedPMBus&>(psu.getPMBus());
setMissingToPresentExpects(mockPMBus, mockedUtil);
// STATUS_WORD 0x0000 is powered on, no faults.
PMBusExpectations expectations;
setPMBusExpectations(mockPMBus, expectations);
// Call to analyze will trigger read of "in1_input" to check voltage.
EXPECT_CALL(mockPMBus, readString(READ_VIN, _))
.Times(1)
.WillOnce(Return("209100"));
psu.analyze();
EXPECT_EQ(psu.hasPS12VcsFault(), false);
// Next return STATUS_WORD with MFR fault bit on.
expectations.statusWordValue = (status_word::MFR_SPECIFIC_FAULT);
// STATUS_MFR_SPEFIC with bit(s) on.
expectations.statusMFRValue = 0xFF;
for (auto x = 1; x <= DEGLITCH_LIMIT; x++)
{
setPMBusExpectations(mockPMBus, expectations);
EXPECT_CALL(mockPMBus, readString(READ_VIN, _))
.Times(1)
.WillOnce(Return("209200"));
psu.analyze();
EXPECT_EQ(psu.hasPS12VcsFault(), x >= DEGLITCH_LIMIT);
}
// Back to no bits on in STATUS_WORD
expectations.statusWordValue = 0;
setPMBusExpectations(mockPMBus, expectations);
EXPECT_CALL(mockPMBus, readString(READ_VIN, _))
.Times(1)
.WillOnce(Return("209300"));
psu.analyze();
EXPECT_EQ(psu.hasPS12VcsFault(), false);
// Next return STATUS_WORD with MFR fault bit on.
expectations.statusWordValue = (status_word::MFR_SPECIFIC_FAULT);
// STATUS_MFR_SPEFIC with bit 6 on.
expectations.statusMFRValue = 0x40;
for (auto x = 1; x <= DEGLITCH_LIMIT; x++)
{
setPMBusExpectations(mockPMBus, expectations);
EXPECT_CALL(mockPMBus, readString(READ_VIN, _))
.Times(1)
.WillOnce(Return("209400"));
psu.analyze();
EXPECT_EQ(psu.hasPS12VcsFault(), x >= DEGLITCH_LIMIT);
}
// Back to no bits on in STATUS_WORD
expectations.statusWordValue = 0;
setPMBusExpectations(mockPMBus, expectations);
EXPECT_CALL(mockPMBus, readString(READ_VIN, _))
.Times(1)
.WillOnce(Return("209500"));
psu.analyze();
EXPECT_EQ(psu.hasPS12VcsFault(), false);
}
TEST_F(PowerSupplyTests, HasPSCS12VFault)
{
auto bus = sdbusplus::bus::new_default();
PowerSupply psu{bus, PSUInventoryPath, 6, 0x6f, PSUGPIOLineName};
MockedGPIOInterface* mockPresenceGPIO =
static_cast<MockedGPIOInterface*>(psu.getPresenceGPIO());
// Always return 1 to indicate present.
EXPECT_CALL(*mockPresenceGPIO, read()).WillRepeatedly(Return(1));
MockedPMBus& mockPMBus = static_cast<MockedPMBus&>(psu.getPMBus());
setMissingToPresentExpects(mockPMBus, mockedUtil);
// STATUS_WORD 0x0000 is powered on, no faults.
PMBusExpectations expectations;
setPMBusExpectations(mockPMBus, expectations);
EXPECT_CALL(mockPMBus, readString(READ_VIN, _))
.Times(1)
.WillOnce(Return("209100"));
psu.analyze();
EXPECT_EQ(psu.hasPSCS12VFault(), false);
// Next return STATUS_WORD with MFR fault bit on.
expectations.statusWordValue = (status_word::MFR_SPECIFIC_FAULT);
// STATUS_MFR_SPEFIC with bit(s) on.
expectations.statusMFRValue = 0xFF;
for (auto x = 1; x <= DEGLITCH_LIMIT; x++)
{
setPMBusExpectations(mockPMBus, expectations);
EXPECT_CALL(mockPMBus, readString(READ_VIN, _))
.Times(1)
.WillOnce(Return("209200"));
psu.analyze();
EXPECT_EQ(psu.hasPSCS12VFault(), x >= DEGLITCH_LIMIT);
}
// Back to no bits on in STATUS_WORD
expectations.statusWordValue = 0;
setPMBusExpectations(mockPMBus, expectations);
EXPECT_CALL(mockPMBus, readString(READ_VIN, _))
.Times(1)
.WillOnce(Return("209300"));
psu.analyze();
EXPECT_EQ(psu.hasPSCS12VFault(), false);
// Next return STATUS_WORD with MFR fault bit on.
expectations.statusWordValue = (status_word::MFR_SPECIFIC_FAULT);
// STATUS_MFR_SPEFIC with bit 7 on.
expectations.statusMFRValue = 0x80;
for (auto x = 1; x <= DEGLITCH_LIMIT; x++)
{
setPMBusExpectations(mockPMBus, expectations);
EXPECT_CALL(mockPMBus, readString(READ_VIN, _))
.Times(1)
.WillOnce(Return("209400"));
psu.analyze();
EXPECT_EQ(psu.hasPSCS12VFault(), x >= DEGLITCH_LIMIT);
}
// Back to no bits on in STATUS_WORD
expectations.statusWordValue = 0;
setPMBusExpectations(mockPMBus, expectations);
EXPECT_CALL(mockPMBus, readString(READ_VIN, _))
.Times(1)
.WillOnce(Return("209500"));
psu.analyze();
EXPECT_EQ(psu.hasPSCS12VFault(), false);
}