blob: e81d7f1b968083e9be5226e7a6fd1ee8d75e6134 [file] [log] [blame]
/**
* Copyright © 2020 IBM Corporation
*
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
#include "manager.hpp"
#include "chassis.hpp"
#include "config_file_parser.hpp"
#include "exception_utils.hpp"
#include "rule.hpp"
#include "utility.hpp"
#include <xyz/openbmc_project/Common/error.hpp>
#include <algorithm>
#include <chrono>
#include <exception>
#include <functional>
#include <map>
#include <tuple>
#include <utility>
#include <variant>
namespace phosphor::power::regulators
{
namespace fs = std::filesystem;
constexpr auto busName = "xyz.openbmc_project.Power.Regulators";
constexpr auto managerObjPath = "/xyz/openbmc_project/power/regulators/manager";
constexpr auto compatibleIntf =
"xyz.openbmc_project.Configuration.IBMCompatibleSystem";
constexpr auto compatibleNamesProp = "Names";
/**
* Default configuration file name. This is used when the system does not
* implement the D-Bus compatible interface.
*/
constexpr auto defaultConfigFileName = "config.json";
/**
* Standard configuration file directory. This directory is part of the
* firmware install image. It contains the standard version of the config file.
*/
const fs::path standardConfigFileDir{"/usr/share/phosphor-regulators"};
/**
* Test configuration file directory. This directory can contain a test version
* of the config file. The test version will override the standard version.
*/
const fs::path testConfigFileDir{"/etc/phosphor-regulators"};
Manager::Manager(sdbusplus::bus::bus& bus, const sdeventplus::Event& event) :
ManagerObject{bus, managerObjPath, true}, bus{bus}, eventLoop{event},
services{bus}
{
// Subscribe to D-Bus interfacesAdded signal from Entity Manager. This
// notifies us if the compatible interface becomes available later.
std::string matchStr = sdbusplus::bus::match::rules::interfacesAdded() +
sdbusplus::bus::match::rules::sender(
"xyz.openbmc_project.EntityManager");
std::unique_ptr<sdbusplus::server::match::match> matchPtr =
std::make_unique<sdbusplus::server::match::match>(
bus, matchStr,
std::bind(&Manager::interfacesAddedHandler, this,
std::placeholders::_1));
signals.emplace_back(std::move(matchPtr));
// Try to find compatible system types using D-Bus compatible interface.
// Note that it might not be supported on this system, or the service that
// provides the interface might not be running yet.
findCompatibleSystemTypes();
// Try to find and load the JSON configuration file
loadConfigFile();
// Obtain dbus service name
bus.request_name(busName);
}
void Manager::configure()
{
// Clear any cached data or error history related to hardware devices
clearHardwareData();
// Verify System object exists; this means config file has been loaded
if (system)
{
// Configure the regulator devices in the system
system->configure(services);
}
else
{
// Write error message to journal
services.getJournal().logError("Unable to configure regulator devices: "
"Configuration file not loaded");
// TODO: Add code to wait for EntityManager to publish the compatible
// interface before logging this error.
// Log critical error since regulators could not be configured. Could
// cause hardware damage if default regulator settings are very wrong.
/*
services.getErrorLogging().logConfigFileError(Entry::Level::Critical,
services.getJournal());
*/
// Throw InternalFailure to propogate error status to D-Bus client
/*
throw sdbusplus::xyz::openbmc_project::Common::Error::InternalFailure{};
*/
}
}
void Manager::interfacesAddedHandler(sdbusplus::message::message& msg)
{
// Verify message is valid
if (!msg)
{
return;
}
try
{
// Read object path for object that was created or had interface added
sdbusplus::message::object_path objPath;
msg.read(objPath);
// Read the dictionary whose keys are interface names and whose values
// are dictionaries containing the interface property names and values
std::map<std::string,
std::map<std::string, std::variant<std::vector<std::string>>>>
intfProp;
msg.read(intfProp);
// Find the compatible interface, if present
auto itIntf = intfProp.find(compatibleIntf);
if (itIntf != intfProp.cend())
{
// Find the Names property of the compatible interface, if present
auto itProp = itIntf->second.find(compatibleNamesProp);
if (itProp != itIntf->second.cend())
{
// Get value of Names property
auto propValue = std::get<0>(itProp->second);
if (!propValue.empty())
{
// Store list of compatible system types
compatibleSystemTypes = propValue;
// Find and load JSON config file based on system types
loadConfigFile();
}
}
}
}
catch (const std::exception&)
{
// Error trying to read interfacesAdded message. One possible cause
// could be a property whose value is not a std::vector<std::string>.
}
}
void Manager::monitor(bool enable)
{
if (enable)
{
/* Temporarily comment out until monitoring is supported.
Timer timer(eventLoop, std::bind(&Manager::timerExpired, this));
// Set timer as a repeating 1sec timer
timer.restart(std::chrono::milliseconds(1000));
timers.emplace_back(std::move(timer));
*/
}
else
{
/* Temporarily comment out until monitoring is supported.
// Delete all timers to disable monitoring
timers.clear();
*/
// Verify System object exists; this means config file has been loaded
if (system)
{
// Close the regulator devices in the system. Monitoring is
// normally disabled because the system is being powered off. The
// devices should be closed in case hardware is removed or replaced
// while the system is powered off.
system->closeDevices(services);
}
}
}
void Manager::sighupHandler(sdeventplus::source::Signal& /*sigSrc*/,
const struct signalfd_siginfo* /*sigInfo*/)
{
// Reload the JSON configuration file
loadConfigFile();
}
void Manager::timerExpired()
{
// TODO Analyze, refresh sensor status, and
// collect/update telemetry for each regulator
}
void Manager::clearHardwareData()
{
// Clear any cached hardware presence data and VPD values
services.getPresenceService().clearCache();
services.getVPD().clearCache();
// Verify System object exists; this means config file has been loaded
if (system)
{
// Clear any cached hardware data in the System object
system->clearCache();
}
// TODO: Clear error history related to hardware devices
}
void Manager::findCompatibleSystemTypes()
{
using namespace phosphor::power::util;
try
{
// Query object mapper for object paths that implement the compatible
// interface. Returns a map of object paths to a map of services names
// to their interfaces.
DbusSubtree subTree = getSubTree(bus, "/xyz/openbmc_project/inventory",
compatibleIntf, 0);
// Get the first object path
auto objectIt = subTree.cbegin();
if (objectIt != subTree.cend())
{
std::string objPath = objectIt->first;
// Get the first service name
auto serviceIt = objectIt->second.cbegin();
if (serviceIt != objectIt->second.cend())
{
std::string service = serviceIt->first;
if (!service.empty())
{
// Get compatible system types property value
getProperty(compatibleIntf, compatibleNamesProp, objPath,
service, bus, compatibleSystemTypes);
}
}
}
}
catch (const std::exception&)
{
// Compatible system types information is not available. The current
// system might not support the interface, or the service that
// implements the interface might not be running yet.
}
}
fs::path Manager::findConfigFile()
{
// Build list of possible base file names
std::vector<std::string> fileNames{};
// Add possible file names based on compatible system types (if any)
for (const std::string& systemType : compatibleSystemTypes)
{
// Replace all spaces and commas in system type name with underscores
std::string fileName{systemType};
std::replace(fileName.begin(), fileName.end(), ' ', '_');
std::replace(fileName.begin(), fileName.end(), ',', '_');
// Append .json suffix and add to list
fileName.append(".json");
fileNames.emplace_back(fileName);
}
// Add default file name for systems that don't use compatible interface
fileNames.emplace_back(defaultConfigFileName);
// Look for a config file with one of the possible base names
for (const std::string& fileName : fileNames)
{
// Check if file exists in test directory
fs::path pathName{testConfigFileDir / fileName};
if (fs::exists(pathName))
{
return pathName;
}
// Check if file exists in standard directory
pathName = standardConfigFileDir / fileName;
if (fs::exists(pathName))
{
return pathName;
}
}
// No config file found; return empty path
return fs::path{};
}
void Manager::loadConfigFile()
{
try
{
// Find the absolute path to the config file
fs::path pathName = findConfigFile();
if (!pathName.empty())
{
// Log info message in journal; config file path is important
services.getJournal().logInfo("Loading configuration file " +
pathName.string());
// Parse the config file
std::vector<std::unique_ptr<Rule>> rules{};
std::vector<std::unique_ptr<Chassis>> chassis{};
std::tie(rules, chassis) = config_file_parser::parse(pathName);
// Store config file information in a new System object. The old
// System object, if any, is automatically deleted.
system =
std::make_unique<System>(std::move(rules), std::move(chassis));
}
}
catch (const std::exception& e)
{
// Log error messages in journal
services.getJournal().logError(exception_utils::getMessages(e));
services.getJournal().logError("Unable to load configuration file");
// Log error
services.getErrorLogging().logConfigFileError(Entry::Level::Error,
services.getJournal());
}
}
} // namespace phosphor::power::regulators