pmbus.cpp - openbmc/phosphor-power - Gitiles

 /**
  * Copyright © 2017 IBM Corporation
  *
  * Licensed under the Apache License, Version 2.0 (the "License");
  * you may not use this file except in compliance with the License.
  * You may obtain a copy of the License at
  *
  *     http://www.apache.org/licenses/LICENSE-2.0
  *
  * Unless required by applicable law or agreed to in writing, software
  * distributed under the License is distributed on an "AS IS" BASIS,
  * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  * See the License for the specific language governing permissions and
  * limitations under the License.
  */
 #include "pmbus.hpp"

 #include <phosphor-logging/elog-errors.hpp>
 #include <phosphor-logging/elog.hpp>
 #include <xyz/openbmc_project/Common/Device/error.hpp>
 #include <xyz/openbmc_project/Common/error.hpp>

 #include <filesystem>
 #include <fstream>

 namespace phosphor
 {
 namespace pmbus
 {

 using namespace phosphor::logging;
 using namespace sdbusplus::xyz::openbmc_project::Common::Error;
 using namespace sdbusplus::xyz::openbmc_project::Common::Device::Error;
 namespace fs = std::filesystem;

 /**
  * @brief Helper to close a file handle
  */
 struct FileCloser
 {
     void operator()(FILE* fp) const
     {
         fclose(fp);
     }
 };

 std::string PMBus::insertPageNum(const std::string& templateName, size_t page)
 {
     auto name = templateName;

     // insert the page where the P was
     auto pos = name.find('P');
     if (pos != std::string::npos)
     {
         name.replace(pos, 1, std::to_string(page));
     }

     return name;
 }

 fs::path PMBus::getPath(Type type)
 {
     switch (type)
     {
         default:
         /* fall through */
         case Type::Base:
             return basePath;
             break;
         case Type::Hwmon:
             return basePath / "hwmon" / hwmonDir;
             break;
         case Type::Debug:
             return debugPath / "pmbus" / hwmonDir;
             break;
         case Type::DeviceDebug:
         {
             auto dir = driverName + "." + std::to_string(instance);
             return debugPath / dir;
             break;
         }
         case Type::HwmonDeviceDebug:
             return debugPath / "pmbus" / hwmonDir / getDeviceName();
             break;
     }
 }

 std::string PMBus::getDeviceName()
 {
     std::string name;
     std::ifstream file;
     auto path = basePath / "name";

     file.exceptions(std::ifstream::failbit | std::ifstream::badbit |
                     std::ifstream::eofbit);
     try
     {
         file.open(path);
         file >> name;
     }
     catch (const std::exception& e)
     {
         log<level::ERR>((std::string("Unable to read PMBus device name "
                                      "PATH=") +
                          path.string())
                             .c_str());
     }

     return name;
 }

 bool PMBus::readBitInPage(const std::string& name, size_t page, Type type)
 {
     auto pagedBit = insertPageNum(name, page);
     return readBit(pagedBit, type);
 }

 bool PMBus::readBit(const std::string& name, Type type)
 {
     unsigned long int value = 0;
     std::ifstream file;
     fs::path path = getPath(type);

     path /= name;

     file.exceptions(std::ifstream::failbit | std::ifstream::badbit |
                     std::ifstream::eofbit);

     try
     {
         char* err = NULL;
         std::string val{1, '\0'};

         file.open(path);
         file.read(&val[0], 1);

         value = strtoul(val.c_str(), &err, 10);

         if (*err)
         {
             log<level::ERR>((std::string("Invalid character in sysfs file"
                                          " FILE=") +
                              path.string() + std::string(" CONTENTS=") + val)
                                 .c_str());

             // Catch below and handle as a read failure
             elog<InternalFailure>();
         }
     }
     catch (const std::exception& e)
     {
         auto rc = errno;

         log<level::ERR>((std::string("Failed to read sysfs file "
                                      "errno=") +
                          std::to_string(rc) + std::string(" FILENAME=") +
                          path.string())
                             .c_str());

         using metadata = xyz::openbmc_project::Common::Device::ReadFailure;

         elog<ReadFailure>(
             metadata::CALLOUT_ERRNO(rc),
             metadata::CALLOUT_DEVICE_PATH(fs::canonical(basePath).c_str()));
     }

     return value != 0;
 }

 bool PMBus::exists(const std::string& name, Type type)
 {
     auto path = getPath(type);
     path /= name;
     return fs::exists(path);
 }

 uint64_t PMBus::read(const std::string& name, Type type, bool errTrace)
 {
     uint64_t data = 0;
     std::ifstream file;
     auto path = getPath(type);
     path /= name;

     file.exceptions(std::ifstream::failbit | std::ifstream::badbit |
                     std::ifstream::eofbit);

     try
     {
         file.open(path);
         file >> std::hex >> data;
     }
     catch (const std::exception& e)
     {
         auto rc = errno;

         if (errTrace)
         {
             log<level::ERR>((std::string("Failed to read sysfs file "
                                          "errno=") +
                              std::to_string(rc) + " FILENAME=" + path.string())
                                 .c_str());

             using metadata = xyz::openbmc_project::Common::Device::ReadFailure;

             elog<ReadFailure>(
                 metadata::CALLOUT_ERRNO(rc),
                 metadata::CALLOUT_DEVICE_PATH(fs::canonical(basePath).c_str()));
         }
         else
         {
             throw ReadFailure();
         }
     }

     return data;
 }

 std::string PMBus::readString(const std::string& name, Type type)
 {
     std::string data;
     std::ifstream file;
     auto path = getPath(type);
     path /= name;

     file.exceptions(std::ifstream::failbit | std::ifstream::badbit |
                     std::ifstream::eofbit);

     try
     {
         file.open(path);
         file >> data;
     }
     catch (const std::exception& e)
     {
         auto rc = errno;
         log<level::ERR>((std::string("Failed to read sysfs file "
                                      "errno=") +
                          std::to_string(rc) + " FILENAME=" + path.string())
                             .c_str());

         using metadata = xyz::openbmc_project::Common::Device::ReadFailure;

         elog<ReadFailure>(
             metadata::CALLOUT_ERRNO(rc),
             metadata::CALLOUT_DEVICE_PATH(fs::canonical(basePath).c_str()));
     }

     return data;
 }

 std::vector<uint8_t> PMBus::readBinary(const std::string& name, Type type,
                                        size_t length)
 {
     auto path = getPath(type) / name;

     // Use C style IO because it's easier to handle telling the difference
     // between hitting EOF or getting an actual error.
     std::unique_ptr<FILE, FileCloser> file{fopen(path.c_str(), "rb")};

     if (file)
     {
         std::vector<uint8_t> data(length, 0);

         auto bytes = fread(data.data(), sizeof(decltype(data[0])), length,
                            file.get());

         if (bytes != length)
         {
             // If hit EOF, just return the amount of data that was read.
             if (feof(file.get()))
             {
                 data.erase(data.begin() + bytes, data.end());
             }
             else if (ferror(file.get()))
             {
                 auto rc = errno;
                 log<level::ERR>((std::string("Failed to read sysfs file "
                                              "errno=") +
                                  std::to_string(rc) +
                                  " FILENAME=" + path.string())
                                     .c_str());
                 using metadata =
                     xyz::openbmc_project::Common::Device::ReadFailure;

                 elog<ReadFailure>(metadata::CALLOUT_ERRNO(rc),
                                   metadata::CALLOUT_DEVICE_PATH(
                                       fs::canonical(basePath).c_str()));
             }
         }
         return data;
     }

     return std::vector<uint8_t>{};
 }

 void PMBus::write(const std::string& name, int value, Type type)
 {
     std::ofstream file;
     fs::path path = getPath(type);

     path /= name;

     file.exceptions(std::ofstream::failbit | std::ofstream::badbit |
                     std::ofstream::eofbit);

     try
     {
         file.open(path);
         file << value;
     }
     catch (const std::exception& e)
     {
         auto rc = errno;
         log<level::ERR>((std::string("Failed to write sysfs file "
                                      "errno=") +
                          std::to_string(rc) + " FILENAME=" + path.string())
                             .c_str());

         using metadata = xyz::openbmc_project::Common::Device::WriteFailure;

         elog<WriteFailure>(
             metadata::CALLOUT_ERRNO(rc),
             metadata::CALLOUT_DEVICE_PATH(fs::canonical(basePath).c_str()));
     }
 }

 void PMBus::writeBinary(const std::string& name, std::vector<uint8_t> data,
                         Type type)
 {
     std::ofstream file;
     fs::path path = getPath(type);

     path /= name;

     file.exceptions(std::ofstream::failbit | std::ofstream::badbit |
                     std::ofstream::eofbit);

     try
     {
         // I need to specify binary mode when I construct the ofstream
         file.open(path, std::ios::out | std::ios_base::binary);
         log<level::DEBUG>(std::string("Write data to sysfs file "
                                       "FILENAME=" +
                                       path.string())
                               .c_str());
         file.write(reinterpret_cast<const char*>(&data[0]), data.size());
     }
     catch (const std::exception& e)
     {
         auto rc = errno;
         log<level::ERR>(
             (std::string("Failed to write binary data to sysfs file "
                          "errno=") +
              std::to_string(rc) + " FILENAME=" + path.string())
                 .c_str());

         using metadata = xyz::openbmc_project::Common::Device::WriteFailure;

         elog<WriteFailure>(
             metadata::CALLOUT_ERRNO(rc),
             metadata::CALLOUT_DEVICE_PATH(fs::canonical(basePath).c_str()));
     }
 }

 void PMBus::findHwmonDir()
 {
     fs::path path{basePath};
     path /= "hwmon";

     // Make sure the directory exists, otherwise for things that can be
     // dynamically present or not present an exception will be thrown if the
     // hwmon directory is not there, resulting in a program termination.
     if (fs::is_directory(path))
     {
         // look for <basePath>/hwmon/hwmonN/
         for (auto& f : fs::directory_iterator(path))
         {
             if ((f.path().filename().string().find("hwmon") !=
                  std::string::npos) &&
                 (fs::is_directory(f.path())))
             {
                 hwmonDir = f.path().filename();
                 break;
             }
         }
     }

     // Don't really want to crash here, just log it
     // and let accesses fail later
     if (hwmonDir.empty())
     {
         log<level::INFO>(std::string("Unable to find hwmon directory "
                                      "in device base path"
                                      " DEVICE_PATH=" +
                                      basePath.string())
                              .c_str());
     }
 }

 std::unique_ptr<PMBusBase> PMBus::createPMBus(std::uint8_t bus,
                                               const std::string& address)
 {
     const std::string physpath = {"/sys/bus/i2c/devices/" +
                                   std::to_string(bus) + "-" + address};
     auto interface = std::make_unique<PMBus>(physpath);

     return interface;
 }

 std::unique_ptr<PMBusBase> createPMBus(std::uint8_t bus,
                                        const std::string& address)
 {
     return PMBus::createPMBus(bus, address);
 }

 } // namespace pmbus
 } // namespace phosphor
	/**
	* Copyright © 2017 IBM Corporation
	*
	* Licensed under the Apache License, Version 2.0 (the "License");
	* you may not use this file except in compliance with the License.
	* You may obtain a copy of the License at
	*
	* http://www.apache.org/licenses/LICENSE-2.0
	*
	* Unless required by applicable law or agreed to in writing, software
	* distributed under the License is distributed on an "AS IS" BASIS,
	* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
	* See the License for the specific language governing permissions and
	* limitations under the License.
	*/
	#include "pmbus.hpp"

	#include <phosphor-logging/elog-errors.hpp>
	#include <phosphor-logging/elog.hpp>
	#include <xyz/openbmc_project/Common/Device/error.hpp>
	#include <xyz/openbmc_project/Common/error.hpp>

	#include <filesystem>
	#include <fstream>

	namespace phosphor
	{
	namespace pmbus
	{

	using namespace phosphor::logging;
	using namespace sdbusplus::xyz::openbmc_project::Common::Error;
	using namespace sdbusplus::xyz::openbmc_project::Common::Device::Error;
	namespace fs = std::filesystem;

	/**
	* @brief Helper to close a file handle
	*/
	struct FileCloser
	{
	void operator()(FILE* fp) const
	{
	fclose(fp);
	}
	};

	std::string PMBus::insertPageNum(const std::string& templateName, size_t page)
	{
	auto name = templateName;

	// insert the page where the P was
	auto pos = name.find('P');
	if (pos != std::string::npos)
	{
	name.replace(pos, 1, std::to_string(page));
	}

	return name;
	}

	fs::path PMBus::getPath(Type type)
	{
	switch (type)
	{
	default:
	/* fall through */
	case Type::Base:
	return basePath;
	break;
	case Type::Hwmon:
	return basePath / "hwmon" / hwmonDir;
	break;
	case Type::Debug:
	return debugPath / "pmbus" / hwmonDir;
	break;
	case Type::DeviceDebug:
	{
	auto dir = driverName + "." + std::to_string(instance);
	return debugPath / dir;
	break;
	}
	case Type::HwmonDeviceDebug:
	return debugPath / "pmbus" / hwmonDir / getDeviceName();
	break;
	}
	}

	std::string PMBus::getDeviceName()
	{
	std::string name;
	std::ifstream file;
	auto path = basePath / "name";

	file.exceptions(std::ifstream::failbit \| std::ifstream::badbit \|
	std::ifstream::eofbit);
	try
	{
	file.open(path);
	file >> name;
	}
	catch (const std::exception& e)
	{
	log<level::ERR>((std::string("Unable to read PMBus device name "
	"PATH=") +
	path.string())
	.c_str());
	}

	return name;
	}

	bool PMBus::readBitInPage(const std::string& name, size_t page, Type type)
	{
	auto pagedBit = insertPageNum(name, page);
	return readBit(pagedBit, type);
	}

	bool PMBus::readBit(const std::string& name, Type type)
	{
	unsigned long int value = 0;
	std::ifstream file;
	fs::path path = getPath(type);

	path /= name;

	file.exceptions(std::ifstream::failbit \| std::ifstream::badbit \|
	std::ifstream::eofbit);

	try
	{
	char* err = NULL;
	std::string val{1, '\0'};

	file.open(path);
	file.read(&val[0], 1);

	value = strtoul(val.c_str(), &err, 10);

	if (*err)
	{
	log<level::ERR>((std::string("Invalid character in sysfs file"
	" FILE=") +
	path.string() + std::string(" CONTENTS=") + val)
	.c_str());

	// Catch below and handle as a read failure
	elog<InternalFailure>();
	}
	}
	catch (const std::exception& e)
	{
	auto rc = errno;

	log<level::ERR>((std::string("Failed to read sysfs file "
	"errno=") +
	std::to_string(rc) + std::string(" FILENAME=") +
	path.string())
	.c_str());

	using metadata = xyz::openbmc_project::Common::Device::ReadFailure;

	elog<ReadFailure>(
	metadata::CALLOUT_ERRNO(rc),
	metadata::CALLOUT_DEVICE_PATH(fs::canonical(basePath).c_str()));
	}

	return value != 0;
	}

	bool PMBus::exists(const std::string& name, Type type)
	{
	auto path = getPath(type);
	path /= name;
	return fs::exists(path);
	}

	uint64_t PMBus::read(const std::string& name, Type type, bool errTrace)
	{
	uint64_t data = 0;
	std::ifstream file;
	auto path = getPath(type);
	path /= name;

	file.exceptions(std::ifstream::failbit \| std::ifstream::badbit \|
	std::ifstream::eofbit);

	try
	{
	file.open(path);
	file >> std::hex >> data;
	}
	catch (const std::exception& e)
	{
	auto rc = errno;

	if (errTrace)
	{
	log<level::ERR>((std::string("Failed to read sysfs file "
	"errno=") +
	std::to_string(rc) + " FILENAME=" + path.string())
	.c_str());

	using metadata = xyz::openbmc_project::Common::Device::ReadFailure;

	elog<ReadFailure>(
	metadata::CALLOUT_ERRNO(rc),
	metadata::CALLOUT_DEVICE_PATH(fs::canonical(basePath).c_str()));
	}
	else
	{
	throw ReadFailure();
	}
	}

	return data;
	}

	std::string PMBus::readString(const std::string& name, Type type)
	{
	std::string data;
	std::ifstream file;
	auto path = getPath(type);
	path /= name;

	file.exceptions(std::ifstream::failbit \| std::ifstream::badbit \|
	std::ifstream::eofbit);

	try
	{
	file.open(path);
	file >> data;
	}
	catch (const std::exception& e)
	{
	auto rc = errno;
	log<level::ERR>((std::string("Failed to read sysfs file "
	"errno=") +
	std::to_string(rc) + " FILENAME=" + path.string())
	.c_str());

	using metadata = xyz::openbmc_project::Common::Device::ReadFailure;

	elog<ReadFailure>(
	metadata::CALLOUT_ERRNO(rc),
	metadata::CALLOUT_DEVICE_PATH(fs::canonical(basePath).c_str()));
	}

	return data;
	}

	std::vector<uint8_t> PMBus::readBinary(const std::string& name, Type type,
	size_t length)
	{
	auto path = getPath(type) / name;

	// Use C style IO because it's easier to handle telling the difference
	// between hitting EOF or getting an actual error.
	std::unique_ptr<FILE, FileCloser> file{fopen(path.c_str(), "rb")};

	if (file)
	{
	std::vector<uint8_t> data(length, 0);

	auto bytes = fread(data.data(), sizeof(decltype(data[0])), length,
	file.get());

	if (bytes != length)
	{
	// If hit EOF, just return the amount of data that was read.
	if (feof(file.get()))
	{
	data.erase(data.begin() + bytes, data.end());
	}
	else if (ferror(file.get()))
	{
	auto rc = errno;
	log<level::ERR>((std::string("Failed to read sysfs file "
	"errno=") +
	std::to_string(rc) +
	" FILENAME=" + path.string())
	.c_str());
	using metadata =
	xyz::openbmc_project::Common::Device::ReadFailure;

	elog<ReadFailure>(metadata::CALLOUT_ERRNO(rc),
	metadata::CALLOUT_DEVICE_PATH(
	fs::canonical(basePath).c_str()));
	}
	}
	return data;
	}

	return std::vector<uint8_t>{};
	}

	void PMBus::write(const std::string& name, int value, Type type)
	{
	std::ofstream file;
	fs::path path = getPath(type);

	path /= name;

	file.exceptions(std::ofstream::failbit \| std::ofstream::badbit \|
	std::ofstream::eofbit);

	try
	{
	file.open(path);
	file << value;
	}
	catch (const std::exception& e)
	{
	auto rc = errno;
	log<level::ERR>((std::string("Failed to write sysfs file "
	"errno=") +
	std::to_string(rc) + " FILENAME=" + path.string())
	.c_str());

	using metadata = xyz::openbmc_project::Common::Device::WriteFailure;

	elog<WriteFailure>(
	metadata::CALLOUT_ERRNO(rc),
	metadata::CALLOUT_DEVICE_PATH(fs::canonical(basePath).c_str()));
	}
	}

	void PMBus::writeBinary(const std::string& name, std::vector<uint8_t> data,
	Type type)
	{
	std::ofstream file;
	fs::path path = getPath(type);

	path /= name;

	file.exceptions(std::ofstream::failbit \| std::ofstream::badbit \|
	std::ofstream::eofbit);

	try
	{
	// I need to specify binary mode when I construct the ofstream
	file.open(path, std::ios::out \| std::ios_base::binary);
	log<level::DEBUG>(std::string("Write data to sysfs file "
	"FILENAME=" +
	path.string())
	.c_str());
	file.write(reinterpret_cast<const char*>(&data[0]), data.size());
	}
	catch (const std::exception& e)
	{
	auto rc = errno;
	log<level::ERR>(
	(std::string("Failed to write binary data to sysfs file "
	"errno=") +
	std::to_string(rc) + " FILENAME=" + path.string())
	.c_str());

	using metadata = xyz::openbmc_project::Common::Device::WriteFailure;

	elog<WriteFailure>(
	metadata::CALLOUT_ERRNO(rc),
	metadata::CALLOUT_DEVICE_PATH(fs::canonical(basePath).c_str()));
	}
	}

	void PMBus::findHwmonDir()
	{
	fs::path path{basePath};
	path /= "hwmon";

	// Make sure the directory exists, otherwise for things that can be
	// dynamically present or not present an exception will be thrown if the
	// hwmon directory is not there, resulting in a program termination.
	if (fs::is_directory(path))
	{
	// look for <basePath>/hwmon/hwmonN/
	for (auto& f : fs::directory_iterator(path))
	{
	if ((f.path().filename().string().find("hwmon") !=
	std::string::npos) &&
	(fs::is_directory(f.path())))
	{
	hwmonDir = f.path().filename();
	break;
	}
	}
	}

	// Don't really want to crash here, just log it
	// and let accesses fail later
	if (hwmonDir.empty())
	{
	log<level::INFO>(std::string("Unable to find hwmon directory "
	"in device base path"
	" DEVICE_PATH=" +
	basePath.string())
	.c_str());
	}
	}

	std::unique_ptr<PMBusBase> PMBus::createPMBus(std::uint8_t bus,
	const std::string& address)
	{
	const std::string physpath = {"/sys/bus/i2c/devices/" +
	std::to_string(bus) + "-" + address};
	auto interface = std::make_unique<PMBus>(physpath);

	return interface;
	}

	std::unique_ptr<PMBusBase> createPMBus(std::uint8_t bus,
	const std::string& address)
	{
	return PMBus::createPMBus(bus, address);
	}

	} // namespace pmbus
	} // namespace phosphor