power-supply/power_supply.cpp - openbmc/phosphor-power - Gitiles

 /**
  * Copyright © 2017 IBM Corporation
  *
  * Licensed under the Apache License, Version 2.0 (the "License");
  * you may not use this file except in compliance with the License.
  * You may obtain a copy of the License at
  *
  *     http://www.apache.org/licenses/LICENSE-2.0
  *
  * Unless required by applicable law or agreed to in writing, software
  * distributed under the License is distributed on an "AS IS" BASIS,
  * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  * See the License for the specific language governing permissions and
  * limitations under the License.
  */
 #include "config.h"

 #include "power_supply.hpp"

 #include "elog-errors.hpp"
 #include "gpio.hpp"
 #include "names_values.hpp"
 #include "pmbus.hpp"
 #include "types.hpp"
 #include "utility.hpp"

 #include <org/open_power/Witherspoon/Fault/error.hpp>
 #include <phosphor-logging/log.hpp>
 #include <xyz/openbmc_project/Common/Device/error.hpp>

 #include <functional>

 namespace phosphor
 {
 namespace power
 {
 namespace psu
 {

 using namespace phosphor::logging;
 using namespace sdbusplus::org::open_power::Witherspoon::Fault::Error;
 using namespace sdbusplus::xyz::openbmc_project::Common::Device::Error;

 PowerSupply::PowerSupply(const std::string& name, size_t inst,
                          const std::string& objpath, const std::string& invpath,
                          sdbusplus::bus::bus& bus, const sdeventplus::Event& e,
                          std::chrono::seconds& t, std::chrono::seconds& p) :
     Device(name, inst),
     monitorPath(objpath), pmbusIntf(objpath),
     inventoryPath(INVENTORY_OBJ_PATH + invpath), bus(bus), presentInterval(p),
     presentTimer(e, std::bind([this]() {
                      // The hwmon path may have changed.
                      pmbusIntf.findHwmonDir();
                      this->present = true;

                      // Sync the INPUT_HISTORY data for all PSs
                      syncHistory();

                      // Update the inventory for the new device
                      updateInventory();
                  })),
     powerOnInterval(t),
     powerOnTimer(e, std::bind([this]() { this->powerOn = true; }))
 {
     getAccessType();

     using namespace sdbusplus::bus;
     using namespace phosphor::pmbus;
     std::uint16_t statusWord = 0;
     try
     {
         // Read the 2 byte STATUS_WORD value to check for faults.
         statusWord = pmbusIntf.read(STATUS_WORD, Type::Debug);
         if (!((statusWord & status_word::INPUT_FAULT_WARN) ||
               (statusWord & status_word::VIN_UV_FAULT)))
         {
             resolveError(inventoryPath,
                          std::string(PowerSupplyInputFault::errName));
         }
     }
     catch (ReadFailure& e)
     {
         log<level::INFO>("Unable to read the 2 byte STATUS_WORD value to check "
                          "for power-supply input faults.");
     }
     presentMatch = std::make_unique<match_t>(
         bus, match::rules::propertiesChanged(inventoryPath, INVENTORY_IFACE),
         [this](auto& msg) { this->inventoryChanged(msg); });
     // Get initial presence state.
     updatePresence();

     // Write the SN, PN, etc to the inventory
     updateInventory();

     // Subscribe to power state changes
     powerOnMatch = std::make_unique<match_t>(
         bus, match::rules::propertiesChanged(POWER_OBJ_PATH, POWER_IFACE),
         [this](auto& msg) { this->powerStateChanged(msg); });
     // Get initial power state.
     updatePowerState();
 }

 void PowerSupply::getAccessType()
 {
     using namespace phosphor::power::util;
     fruJson = loadJSONFromFile(PSU_JSON_PATH);
     if (fruJson == nullptr)
     {
         log<level::ERR>("InternalFailure when parsing the JSON file");
         return;
     }
     inventoryPMBusAccessType = getPMBusAccessType(fruJson);
 }

 void PowerSupply::captureCmd(util::NamesValues& nv, const std::string& cmd,
                              phosphor::pmbus::Type type)
 {
     if (pmbusIntf.exists(cmd, type))
     {
         try
         {
             auto val = pmbusIntf.read(cmd, type);
             nv.add(cmd, val);
         }
         catch (std::exception& e)
         {
             log<level::INFO>("Unable to capture metadata",
                              entry("CMD=%s", cmd.c_str()));
         }
     }
 }

 void PowerSupply::analyze()
 {
     using namespace phosphor::pmbus;

     try
     {
         if (present)
         {
             std::uint16_t statusWord = 0;

             // Read the 2 byte STATUS_WORD value to check for faults.
             statusWord = pmbusIntf.read(STATUS_WORD, Type::Debug);
             readFail = 0;

             checkInputFault(statusWord);

             if (powerOn && (inputFault == 0) && !faultFound)
             {
                 checkFanFault(statusWord);
                 checkTemperatureFault(statusWord);
                 checkOutputOvervoltageFault(statusWord);
                 checkCurrentOutOverCurrentFault(statusWord);
                 checkPGOrUnitOffFault(statusWord);
             }

             updateHistory();
         }
     }
     catch (ReadFailure& e)
     {
         if (readFail < FAULT_COUNT)
         {
             readFail++;
         }

         if (!readFailLogged && readFail >= FAULT_COUNT)
         {
             commit<ReadFailure>();
             readFailLogged = true;
         }
     }

     return;
 }

 void PowerSupply::inventoryChanged(sdbusplus::message::message& msg)
 {
     std::string msgSensor;
     std::map<std::string, std::variant<uint32_t, bool>> msgData;
     msg.read(msgSensor, msgData);

     // Check if it was the Present property that changed.
     auto valPropMap = msgData.find(PRESENT_PROP);
     if (valPropMap != msgData.end())
     {
         if (std::get<bool>(valPropMap->second))
         {
             clearFaults();
             presentTimer.restartOnce(presentInterval);
         }
         else
         {
             present = false;
             presentTimer.setEnabled(false);

             // Clear out the now outdated inventory properties
             updateInventory();
         }
     }

     return;
 }

 void PowerSupply::updatePresence()
 {
     // Use getProperty utility function to get presence status.
     std::string service = "xyz.openbmc_project.Inventory.Manager";
     util::getProperty(INVENTORY_IFACE, PRESENT_PROP, inventoryPath, service,
                       bus, this->present);
 }

 void PowerSupply::powerStateChanged(sdbusplus::message::message& msg)
 {
     int32_t state = 0;
     std::string msgSensor;
     std::map<std::string, std::variant<int32_t>> msgData;
     msg.read(msgSensor, msgData);

     // Check if it was the Present property that changed.
     auto valPropMap = msgData.find("state");
     if (valPropMap != msgData.end())
     {
         state = std::get<int32_t>(valPropMap->second);

         // Power is on when state=1. Set the fault logged variables to false
         // and start the power on timer when the state changes to 1.
         if (state)
         {
             clearFaults();
             powerOnTimer.restartOnce(powerOnInterval);
         }
         else
         {
             powerOnTimer.setEnabled(false);
             powerOn = false;
         }
     }
 }

 void PowerSupply::updatePowerState()
 {
     powerOn = util::isPoweredOn(bus);
 }

 void PowerSupply::checkInputFault(const uint16_t statusWord)
 {
     using namespace phosphor::pmbus;

     if ((inputFault < FAULT_COUNT) &&
         ((statusWord & status_word::INPUT_FAULT_WARN) ||
          (statusWord & status_word::VIN_UV_FAULT)))
     {
         if (inputFault == 0)
         {
             log<level::INFO>("INPUT or VIN_UV fault",
                              entry("STATUS_WORD=0x%04X", statusWord));
         }

         inputFault++;
     }
     else
     {
         if ((inputFault > 0) && !(statusWord & status_word::INPUT_FAULT_WARN) &&
             !(statusWord & status_word::VIN_UV_FAULT))
         {
             inputFault = 0;
             faultFound = false;
             // When an input fault occurs, the power supply cannot be on.
             // However, the check for the case where the power supply should be
             // on will stop when there is a fault found.
             // Clear the powerOnFault when the inputFault is cleared to reset
             // the powerOnFault de-glitching.
             powerOnFault = 0;

             log<level::INFO>("INPUT_FAULT_WARN cleared",
                              entry("POWERSUPPLY=%s", inventoryPath.c_str()));

             resolveError(inventoryPath,
                          std::string(PowerSupplyInputFault::errName));

             if (powerOn)
             {
                 // The power supply will not be immediately powered on after
                 // the input power is restored.
                 powerOn = false;
                 // Start up the timer that will set the state to indicate we
                 // are ready for the powered on fault checks.
                 powerOnTimer.restartOnce(powerOnInterval);
             }
         }
     }

     if (!faultFound && (inputFault >= FAULT_COUNT))
     {
         // If the power is on, report the fault in an error log entry.
         if (powerOn)
         {
             util::NamesValues nv;
             nv.add("STATUS_WORD", statusWord);
             captureCmd(nv, STATUS_INPUT, Type::Debug);

             using metadata =
                 org::open_power::Witherspoon::Fault::PowerSupplyInputFault;

             report<PowerSupplyInputFault>(
                 metadata::RAW_STATUS(nv.get().c_str()),
                 metadata::CALLOUT_INVENTORY_PATH(inventoryPath.c_str()));

             faultFound = true;
         }
     }
 }

 void PowerSupply::checkPGOrUnitOffFault(const uint16_t statusWord)
 {
     using namespace phosphor::pmbus;

     if (powerOnFault < FAULT_COUNT)
     {
         // Check PG# and UNIT_IS_OFF
         if ((statusWord & status_word::POWER_GOOD_NEGATED) ||
             (statusWord & status_word::UNIT_IS_OFF))
         {
             log<level::INFO>("PGOOD or UNIT_IS_OFF bit bad",
                              entry("STATUS_WORD=0x%04X", statusWord));
             powerOnFault++;
         }
         else
         {
             if (powerOnFault > 0)
             {
                 log<level::INFO>("PGOOD and UNIT_IS_OFF bits good");
                 powerOnFault = 0;
             }
         }

         if (!faultFound && (powerOnFault >= FAULT_COUNT))
         {
             faultFound = true;

             util::NamesValues nv;
             nv.add("STATUS_WORD", statusWord);
             captureCmd(nv, STATUS_INPUT, Type::Debug);
             auto status0Vout = pmbusIntf.insertPageNum(STATUS_VOUT, 0);
             captureCmd(nv, status0Vout, Type::Debug);
             captureCmd(nv, STATUS_IOUT, Type::Debug);
             captureCmd(nv, STATUS_MFR, Type::Debug);

             using metadata =
                 org::open_power::Witherspoon::Fault::PowerSupplyShouldBeOn;

             // A power supply is OFF (or pgood low) but should be on.
             report<PowerSupplyShouldBeOn>(
                 metadata::RAW_STATUS(nv.get().c_str()),
                 metadata::CALLOUT_INVENTORY_PATH(inventoryPath.c_str()));
         }
     }
 }

 void PowerSupply::checkCurrentOutOverCurrentFault(const uint16_t statusWord)
 {
     using namespace phosphor::pmbus;

     if (outputOCFault < FAULT_COUNT)
     {
         // Check for an output overcurrent fault.
         if ((statusWord & status_word::IOUT_OC_FAULT))
         {
             outputOCFault++;
         }
         else
         {
             if (outputOCFault > 0)
             {
                 outputOCFault = 0;
             }
         }

         if (!faultFound && (outputOCFault >= FAULT_COUNT))
         {
             util::NamesValues nv;
             nv.add("STATUS_WORD", statusWord);
             captureCmd(nv, STATUS_INPUT, Type::Debug);
             auto status0Vout = pmbusIntf.insertPageNum(STATUS_VOUT, 0);
             captureCmd(nv, status0Vout, Type::Debug);
             captureCmd(nv, STATUS_IOUT, Type::Debug);
             captureCmd(nv, STATUS_MFR, Type::Debug);

             using metadata = org::open_power::Witherspoon::Fault::
                 PowerSupplyOutputOvercurrent;

             report<PowerSupplyOutputOvercurrent>(
                 metadata::RAW_STATUS(nv.get().c_str()),
                 metadata::CALLOUT_INVENTORY_PATH(inventoryPath.c_str()));

             faultFound = true;
         }
     }
 }

 void PowerSupply::checkOutputOvervoltageFault(const uint16_t statusWord)
 {
     using namespace phosphor::pmbus;

     if (outputOVFault < FAULT_COUNT)
     {
         // Check for an output overvoltage fault.
         if (statusWord & status_word::VOUT_OV_FAULT)
         {
             outputOVFault++;
         }
         else
         {
             if (outputOVFault > 0)
             {
                 outputOVFault = 0;
             }
         }

         if (!faultFound && (outputOVFault >= FAULT_COUNT))
         {
             util::NamesValues nv;
             nv.add("STATUS_WORD", statusWord);
             captureCmd(nv, STATUS_INPUT, Type::Debug);
             auto status0Vout = pmbusIntf.insertPageNum(STATUS_VOUT, 0);
             captureCmd(nv, status0Vout, Type::Debug);
             captureCmd(nv, STATUS_IOUT, Type::Debug);
             captureCmd(nv, STATUS_MFR, Type::Debug);

             using metadata = org::open_power::Witherspoon::Fault::
                 PowerSupplyOutputOvervoltage;

             report<PowerSupplyOutputOvervoltage>(
                 metadata::RAW_STATUS(nv.get().c_str()),
                 metadata::CALLOUT_INVENTORY_PATH(inventoryPath.c_str()));

             faultFound = true;
         }
     }
 }

 void PowerSupply::checkFanFault(const uint16_t statusWord)
 {
     using namespace phosphor::pmbus;

     if (fanFault < FAULT_COUNT)
     {
         // Check for a fan fault or warning condition
         if (statusWord & status_word::FAN_FAULT)
         {
             fanFault++;
         }
         else
         {
             if (fanFault > 0)
             {
                 fanFault = 0;
             }
         }

         if (!faultFound && (fanFault >= FAULT_COUNT))
         {
             util::NamesValues nv;
             nv.add("STATUS_WORD", statusWord);
             captureCmd(nv, STATUS_MFR, Type::Debug);
             captureCmd(nv, STATUS_TEMPERATURE, Type::Debug);
             captureCmd(nv, STATUS_FANS_1_2, Type::Debug);

             using metadata =
                 org::open_power::Witherspoon::Fault::PowerSupplyFanFault;

             report<PowerSupplyFanFault>(
                 metadata::RAW_STATUS(nv.get().c_str()),
                 metadata::CALLOUT_INVENTORY_PATH(inventoryPath.c_str()));

             faultFound = true;
         }
     }
 }

 void PowerSupply::checkTemperatureFault(const uint16_t statusWord)
 {
     using namespace phosphor::pmbus;

     // Due to how the PMBus core device driver sends a clear faults command
     // the bit in STATUS_WORD will likely be cleared when we attempt to examine
     // it for a Thermal Fault or Warning. So, check the STATUS_WORD and the
     // STATUS_TEMPERATURE bits. If either indicates a fault, proceed with
     // logging the over-temperature condition.
     std::uint8_t statusTemperature = 0;
     statusTemperature = pmbusIntf.read(STATUS_TEMPERATURE, Type::Debug);
     if (temperatureFault < FAULT_COUNT)
     {
         if ((statusWord & status_word::TEMPERATURE_FAULT_WARN) ||
             (statusTemperature & status_temperature::OT_FAULT))
         {
             temperatureFault++;
         }
         else
         {
             if (temperatureFault > 0)
             {
                 temperatureFault = 0;
             }
         }

         if (!faultFound && (temperatureFault >= FAULT_COUNT))
         {
             // The power supply has had an over-temperature condition.
             // This may not result in a shutdown if experienced for a short
             // duration.
             // This should not occur under normal conditions.
             // The power supply may be faulty, or the paired supply may be
             // putting out less current.
             // Capture command responses with potentially relevant information,
             // and call out the power supply reporting the condition.
             util::NamesValues nv;
             nv.add("STATUS_WORD", statusWord);
             captureCmd(nv, STATUS_MFR, Type::Debug);
             captureCmd(nv, STATUS_IOUT, Type::Debug);
             nv.add("STATUS_TEMPERATURE", statusTemperature);
             captureCmd(nv, STATUS_FANS_1_2, Type::Debug);

             using metadata = org::open_power::Witherspoon::Fault::
                 PowerSupplyTemperatureFault;

             report<PowerSupplyTemperatureFault>(
                 metadata::RAW_STATUS(nv.get().c_str()),
                 metadata::CALLOUT_INVENTORY_PATH(inventoryPath.c_str()));

             faultFound = true;
         }
     }
 }

 void PowerSupply::clearFaults()
 {
     readFail = 0;
     readFailLogged = false;
     inputFault = 0;
     powerOnFault = 0;
     outputOCFault = 0;
     outputOVFault = 0;
     fanFault = 0;
     temperatureFault = 0;
     faultFound = false;

     return;
 }

 void PowerSupply::resolveError(const std::string& callout,
                                const std::string& message)
 {
     using EndpointList = std::vector<std::string>;

     try
     {
         auto path = callout + "/fault";
         // Get the service name from the mapper for the fault callout
         auto service = util::getService(path, ASSOCIATION_IFACE, bus);

         // Use getProperty utility function to get log entries (endpoints)
         EndpointList logEntries;
         util::getProperty(ASSOCIATION_IFACE, ENDPOINTS_PROP, path, service, bus,
                           logEntries);

         // It is possible that all such entries for this callout have since
         // been deleted.
         if (logEntries.empty())
         {
             return;
         }

         auto logEntryService =
             util::getService(logEntries[0], LOGGING_IFACE, bus);
         if (logEntryService.empty())
         {
             return;
         }

         // go through each log entry that matches this callout path
         std::string logMessage;
         for (const auto& logEntry : logEntries)
         {
             // Check to see if this logEntry has a message that matches.
             util::getProperty(LOGGING_IFACE, MESSAGE_PROP, logEntry,
                               logEntryService, bus, logMessage);

             if (message == logMessage)
             {
                 // Log entry matches call out and message, set Resolved to true
                 bool resolved = true;
                 util::setProperty(LOGGING_IFACE, RESOLVED_PROP, logEntry,
                                   logEntryService, bus, resolved);
             }
         }
     }
     catch (std::exception& e)
     {
         log<level::INFO>("Failed to resolve error",
                          entry("CALLOUT=%s", callout.c_str()),
                          entry("ERROR=%s", message.c_str()));
     }
 }

 void PowerSupply::updateInventory()
 {
     using namespace phosphor::pmbus;
     using namespace sdbusplus::message;

     // Build the object map and send it to the inventory
     using Properties = std::map<std::string, std::variant<std::string>>;
     using Interfaces = std::map<std::string, Properties>;
     using Object = std::map<object_path, Interfaces>;
     Properties assetProps;
     Interfaces interfaces;
     Object object;

     // If any of these accesses fail, the fields will just be
     // blank in the inventory.  Leave logging ReadFailure errors
     // to analyze() as it runs continuously and will most
     // likely hit and threshold them first anyway.  The
     // readString() function will do the tracing of the failing
     // path so this code doesn't need to.
     for (const auto& fru : fruJson.at("fruConfigs"))
     {
         if (fru.at("interface") == ASSET_IFACE)
         {
             try
             {
                 assetProps.emplace(
                     fru.at("propertyName"),
                     present ? pmbusIntf.readString(fru.at("fileName"),
                                                    inventoryPMBusAccessType)
                             : "");
             }
             catch (ReadFailure& e)
             {
             }
         }
     }

     interfaces.emplace(ASSET_IFACE, std::move(assetProps));

     // For Notify(), just send the relative path of the inventory
     // object so remove the INVENTORY_OBJ_PATH prefix
     auto path = inventoryPath.substr(strlen(INVENTORY_OBJ_PATH));

     object.emplace(path, std::move(interfaces));

     try
     {
         auto service =
             util::getService(INVENTORY_OBJ_PATH, INVENTORY_MGR_IFACE, bus);

         if (service.empty())
         {
             log<level::ERR>("Unable to get inventory manager service");
             return;
         }

         auto method = bus.new_method_call(service.c_str(), INVENTORY_OBJ_PATH,
                                           INVENTORY_MGR_IFACE, "Notify");

         method.append(std::move(object));

         auto reply = bus.call(method);
     }
     catch (std::exception& e)
     {
         log<level::ERR>(e.what(), entry("PATH=%s", inventoryPath.c_str()));
     }
 }

 void PowerSupply::syncHistory()
 {
     using namespace phosphor::gpio;

     if (syncGPIODevPath.empty())
     {
         // Sync not implemented
         return;
     }

     GPIO gpio{syncGPIODevPath, static_cast<gpioNum_t>(syncGPIONumber),
               Direction::output};

     try
     {
         gpio.set(Value::low);

         std::this_thread::sleep_for(std::chrono::milliseconds{5});

         gpio.set(Value::high);

         recordManager->clear();
     }
     catch (std::exception& e)
     {
         // Do nothing.  There would already be a journal entry.
     }
 }

 void PowerSupply::enableHistory(const std::string& objectPath,
                                 size_t numRecords,
                                 const std::string& syncGPIOPath,
                                 size_t syncGPIONum)
 {
     historyObjectPath = objectPath;
     syncGPIODevPath = syncGPIOPath;
     syncGPIONumber = syncGPIONum;

     recordManager = std::make_unique<history::RecordManager>(numRecords);

     auto avgPath = historyObjectPath + '/' + history::Average::name;
     auto maxPath = historyObjectPath + '/' + history::Maximum::name;

     average = std::make_unique<history::Average>(bus, avgPath);

     maximum = std::make_unique<history::Maximum>(bus, maxPath);
 }

 void PowerSupply::updateHistory()
 {
     if (!recordManager)
     {
         // Not enabled
         return;
     }

     // Read just the most recent average/max record
     auto data =
         pmbusIntf.readBinary(INPUT_HISTORY, pmbus::Type::HwmonDeviceDebug,
                              history::RecordManager::RAW_RECORD_SIZE);

     // Update D-Bus only if something changed (a new record ID, or cleared out)
     auto changed = recordManager->add(data);
     if (changed)
     {
         average->values(std::move(recordManager->getAverageRecords()));
         maximum->values(std::move(recordManager->getMaximumRecords()));
     }
 }

 } // namespace psu
 } // namespace power
 } // namespace phosphor
	/**
	* Copyright © 2017 IBM Corporation
	*
	* Licensed under the Apache License, Version 2.0 (the "License");
	* you may not use this file except in compliance with the License.
	* You may obtain a copy of the License at
	*
	* http://www.apache.org/licenses/LICENSE-2.0
	*
	* Unless required by applicable law or agreed to in writing, software
	* distributed under the License is distributed on an "AS IS" BASIS,
	* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
	* See the License for the specific language governing permissions and
	* limitations under the License.
	*/
	#include "config.h"

	#include "power_supply.hpp"

	#include "elog-errors.hpp"
	#include "gpio.hpp"
	#include "names_values.hpp"
	#include "pmbus.hpp"
	#include "types.hpp"
	#include "utility.hpp"

	#include <org/open_power/Witherspoon/Fault/error.hpp>
	#include <phosphor-logging/log.hpp>
	#include <xyz/openbmc_project/Common/Device/error.hpp>

	#include <functional>

	namespace phosphor
	{
	namespace power
	{
	namespace psu
	{

	using namespace phosphor::logging;
	using namespace sdbusplus::org::open_power::Witherspoon::Fault::Error;
	using namespace sdbusplus::xyz::openbmc_project::Common::Device::Error;

	PowerSupply::PowerSupply(const std::string& name, size_t inst,
	const std::string& objpath, const std::string& invpath,
	sdbusplus::bus::bus& bus, const sdeventplus::Event& e,
	std::chrono::seconds& t, std::chrono::seconds& p) :
	Device(name, inst),
	monitorPath(objpath), pmbusIntf(objpath),
	inventoryPath(INVENTORY_OBJ_PATH + invpath), bus(bus), presentInterval(p),
	presentTimer(e, std::bind([this]() {
	// The hwmon path may have changed.
	pmbusIntf.findHwmonDir();
	this->present = true;

	// Sync the INPUT_HISTORY data for all PSs
	syncHistory();

	// Update the inventory for the new device
	updateInventory();
	})),
	powerOnInterval(t),
	powerOnTimer(e, std::bind([this]() { this->powerOn = true; }))
	{
	getAccessType();

	using namespace sdbusplus::bus;
	using namespace phosphor::pmbus;
	std::uint16_t statusWord = 0;
	try
	{
	// Read the 2 byte STATUS_WORD value to check for faults.
	statusWord = pmbusIntf.read(STATUS_WORD, Type::Debug);
	if (!((statusWord & status_word::INPUT_FAULT_WARN) \|\|
	(statusWord & status_word::VIN_UV_FAULT)))
	{
	resolveError(inventoryPath,
	std::string(PowerSupplyInputFault::errName));
	}
	}
	catch (ReadFailure& e)
	{
	log<level::INFO>("Unable to read the 2 byte STATUS_WORD value to check "
	"for power-supply input faults.");
	}
	presentMatch = std::make_unique<match_t>(
	bus, match::rules::propertiesChanged(inventoryPath, INVENTORY_IFACE),
	[this](auto& msg) { this->inventoryChanged(msg); });
	// Get initial presence state.
	updatePresence();

	// Write the SN, PN, etc to the inventory
	updateInventory();

	// Subscribe to power state changes
	powerOnMatch = std::make_unique<match_t>(
	bus, match::rules::propertiesChanged(POWER_OBJ_PATH, POWER_IFACE),
	[this](auto& msg) { this->powerStateChanged(msg); });
	// Get initial power state.
	updatePowerState();
	}

	void PowerSupply::getAccessType()
	{
	using namespace phosphor::power::util;
	fruJson = loadJSONFromFile(PSU_JSON_PATH);
	if (fruJson == nullptr)
	{
	log<level::ERR>("InternalFailure when parsing the JSON file");
	return;
	}
	inventoryPMBusAccessType = getPMBusAccessType(fruJson);
	}

	void PowerSupply::captureCmd(util::NamesValues& nv, const std::string& cmd,
	phosphor::pmbus::Type type)
	{
	if (pmbusIntf.exists(cmd, type))
	{
	try
	{
	auto val = pmbusIntf.read(cmd, type);
	nv.add(cmd, val);
	}
	catch (std::exception& e)
	{
	log<level::INFO>("Unable to capture metadata",
	entry("CMD=%s", cmd.c_str()));
	}
	}
	}

	void PowerSupply::analyze()
	{
	using namespace phosphor::pmbus;

	try
	{
	if (present)
	{
	std::uint16_t statusWord = 0;

	// Read the 2 byte STATUS_WORD value to check for faults.
	statusWord = pmbusIntf.read(STATUS_WORD, Type::Debug);
	readFail = 0;

	checkInputFault(statusWord);

	if (powerOn && (inputFault == 0) && !faultFound)
	{
	checkFanFault(statusWord);
	checkTemperatureFault(statusWord);
	checkOutputOvervoltageFault(statusWord);
	checkCurrentOutOverCurrentFault(statusWord);
	checkPGOrUnitOffFault(statusWord);
	}

	updateHistory();
	}
	}
	catch (ReadFailure& e)
	{
	if (readFail < FAULT_COUNT)
	{
	readFail++;
	}

	if (!readFailLogged && readFail >= FAULT_COUNT)
	{
	commit<ReadFailure>();
	readFailLogged = true;
	}
	}

	return;
	}

	void PowerSupply::inventoryChanged(sdbusplus::message::message& msg)
	{
	std::string msgSensor;
	std::map<std::string, std::variant<uint32_t, bool>> msgData;
	msg.read(msgSensor, msgData);

	// Check if it was the Present property that changed.
	auto valPropMap = msgData.find(PRESENT_PROP);
	if (valPropMap != msgData.end())
	{
	if (std::get<bool>(valPropMap->second))
	{
	clearFaults();
	presentTimer.restartOnce(presentInterval);
	}
	else
	{
	present = false;
	presentTimer.setEnabled(false);

	// Clear out the now outdated inventory properties
	updateInventory();
	}
	}

	return;
	}

	void PowerSupply::updatePresence()
	{
	// Use getProperty utility function to get presence status.
	std::string service = "xyz.openbmc_project.Inventory.Manager";
	util::getProperty(INVENTORY_IFACE, PRESENT_PROP, inventoryPath, service,
	bus, this->present);
	}

	void PowerSupply::powerStateChanged(sdbusplus::message::message& msg)
	{
	int32_t state = 0;
	std::string msgSensor;
	std::map<std::string, std::variant<int32_t>> msgData;
	msg.read(msgSensor, msgData);

	// Check if it was the Present property that changed.
	auto valPropMap = msgData.find("state");
	if (valPropMap != msgData.end())
	{
	state = std::get<int32_t>(valPropMap->second);

	// Power is on when state=1. Set the fault logged variables to false
	// and start the power on timer when the state changes to 1.
	if (state)
	{
	clearFaults();
	powerOnTimer.restartOnce(powerOnInterval);
	}
	else
	{
	powerOnTimer.setEnabled(false);
	powerOn = false;
	}
	}
	}

	void PowerSupply::updatePowerState()
	{
	powerOn = util::isPoweredOn(bus);
	}

	void PowerSupply::checkInputFault(const uint16_t statusWord)
	{
	using namespace phosphor::pmbus;

	if ((inputFault < FAULT_COUNT) &&
	((statusWord & status_word::INPUT_FAULT_WARN) \|\|
	(statusWord & status_word::VIN_UV_FAULT)))
	{
	if (inputFault == 0)
	{
	log<level::INFO>("INPUT or VIN_UV fault",
	entry("STATUS_WORD=0x%04X", statusWord));
	}

	inputFault++;
	}
	else
	{
	if ((inputFault > 0) && !(statusWord & status_word::INPUT_FAULT_WARN) &&
	!(statusWord & status_word::VIN_UV_FAULT))
	{
	inputFault = 0;
	faultFound = false;
	// When an input fault occurs, the power supply cannot be on.
	// However, the check for the case where the power supply should be
	// on will stop when there is a fault found.
	// Clear the powerOnFault when the inputFault is cleared to reset
	// the powerOnFault de-glitching.
	powerOnFault = 0;

	log<level::INFO>("INPUT_FAULT_WARN cleared",
	entry("POWERSUPPLY=%s", inventoryPath.c_str()));

	resolveError(inventoryPath,
	std::string(PowerSupplyInputFault::errName));

	if (powerOn)
	{
	// The power supply will not be immediately powered on after
	// the input power is restored.
	powerOn = false;
	// Start up the timer that will set the state to indicate we
	// are ready for the powered on fault checks.
	powerOnTimer.restartOnce(powerOnInterval);
	}
	}
	}

	if (!faultFound && (inputFault >= FAULT_COUNT))
	{
	// If the power is on, report the fault in an error log entry.
	if (powerOn)
	{
	util::NamesValues nv;
	nv.add("STATUS_WORD", statusWord);
	captureCmd(nv, STATUS_INPUT, Type::Debug);

	using metadata =
	org::open_power::Witherspoon::Fault::PowerSupplyInputFault;

	report<PowerSupplyInputFault>(
	metadata::RAW_STATUS(nv.get().c_str()),
	metadata::CALLOUT_INVENTORY_PATH(inventoryPath.c_str()));

	faultFound = true;
	}
	}
	}

	void PowerSupply::checkPGOrUnitOffFault(const uint16_t statusWord)
	{
	using namespace phosphor::pmbus;

	if (powerOnFault < FAULT_COUNT)
	{
	// Check PG# and UNIT_IS_OFF
	if ((statusWord & status_word::POWER_GOOD_NEGATED) \|\|
	(statusWord & status_word::UNIT_IS_OFF))
	{
	log<level::INFO>("PGOOD or UNIT_IS_OFF bit bad",
	entry("STATUS_WORD=0x%04X", statusWord));
	powerOnFault++;
	}
	else
	{
	if (powerOnFault > 0)
	{
	log<level::INFO>("PGOOD and UNIT_IS_OFF bits good");
	powerOnFault = 0;
	}
	}

	if (!faultFound && (powerOnFault >= FAULT_COUNT))
	{
	faultFound = true;

	util::NamesValues nv;
	nv.add("STATUS_WORD", statusWord);
	captureCmd(nv, STATUS_INPUT, Type::Debug);
	auto status0Vout = pmbusIntf.insertPageNum(STATUS_VOUT, 0);
	captureCmd(nv, status0Vout, Type::Debug);
	captureCmd(nv, STATUS_IOUT, Type::Debug);
	captureCmd(nv, STATUS_MFR, Type::Debug);

	using metadata =
	org::open_power::Witherspoon::Fault::PowerSupplyShouldBeOn;

	// A power supply is OFF (or pgood low) but should be on.
	report<PowerSupplyShouldBeOn>(
	metadata::RAW_STATUS(nv.get().c_str()),
	metadata::CALLOUT_INVENTORY_PATH(inventoryPath.c_str()));
	}
	}
	}

	void PowerSupply::checkCurrentOutOverCurrentFault(const uint16_t statusWord)
	{
	using namespace phosphor::pmbus;

	if (outputOCFault < FAULT_COUNT)
	{
	// Check for an output overcurrent fault.
	if ((statusWord & status_word::IOUT_OC_FAULT))
	{
	outputOCFault++;
	}
	else
	{
	if (outputOCFault > 0)
	{
	outputOCFault = 0;
	}
	}

	if (!faultFound && (outputOCFault >= FAULT_COUNT))
	{
	util::NamesValues nv;
	nv.add("STATUS_WORD", statusWord);
	captureCmd(nv, STATUS_INPUT, Type::Debug);
	auto status0Vout = pmbusIntf.insertPageNum(STATUS_VOUT, 0);
	captureCmd(nv, status0Vout, Type::Debug);
	captureCmd(nv, STATUS_IOUT, Type::Debug);
	captureCmd(nv, STATUS_MFR, Type::Debug);

	using metadata = org::open_power::Witherspoon::Fault::
	PowerSupplyOutputOvercurrent;

	report<PowerSupplyOutputOvercurrent>(
	metadata::RAW_STATUS(nv.get().c_str()),
	metadata::CALLOUT_INVENTORY_PATH(inventoryPath.c_str()));

	faultFound = true;
	}
	}
	}

	void PowerSupply::checkOutputOvervoltageFault(const uint16_t statusWord)
	{
	using namespace phosphor::pmbus;

	if (outputOVFault < FAULT_COUNT)
	{
	// Check for an output overvoltage fault.
	if (statusWord & status_word::VOUT_OV_FAULT)
	{
	outputOVFault++;
	}
	else
	{
	if (outputOVFault > 0)
	{
	outputOVFault = 0;
	}
	}

	if (!faultFound && (outputOVFault >= FAULT_COUNT))
	{
	util::NamesValues nv;
	nv.add("STATUS_WORD", statusWord);
	captureCmd(nv, STATUS_INPUT, Type::Debug);
	auto status0Vout = pmbusIntf.insertPageNum(STATUS_VOUT, 0);
	captureCmd(nv, status0Vout, Type::Debug);
	captureCmd(nv, STATUS_IOUT, Type::Debug);
	captureCmd(nv, STATUS_MFR, Type::Debug);

	using metadata = org::open_power::Witherspoon::Fault::
	PowerSupplyOutputOvervoltage;

	report<PowerSupplyOutputOvervoltage>(
	metadata::RAW_STATUS(nv.get().c_str()),
	metadata::CALLOUT_INVENTORY_PATH(inventoryPath.c_str()));

	faultFound = true;
	}
	}
	}

	void PowerSupply::checkFanFault(const uint16_t statusWord)
	{
	using namespace phosphor::pmbus;

	if (fanFault < FAULT_COUNT)
	{
	// Check for a fan fault or warning condition
	if (statusWord & status_word::FAN_FAULT)
	{
	fanFault++;
	}
	else
	{
	if (fanFault > 0)
	{
	fanFault = 0;
	}
	}

	if (!faultFound && (fanFault >= FAULT_COUNT))
	{
	util::NamesValues nv;
	nv.add("STATUS_WORD", statusWord);
	captureCmd(nv, STATUS_MFR, Type::Debug);
	captureCmd(nv, STATUS_TEMPERATURE, Type::Debug);
	captureCmd(nv, STATUS_FANS_1_2, Type::Debug);

	using metadata =
	org::open_power::Witherspoon::Fault::PowerSupplyFanFault;

	report<PowerSupplyFanFault>(
	metadata::RAW_STATUS(nv.get().c_str()),
	metadata::CALLOUT_INVENTORY_PATH(inventoryPath.c_str()));

	faultFound = true;
	}
	}
	}

	void PowerSupply::checkTemperatureFault(const uint16_t statusWord)
	{
	using namespace phosphor::pmbus;

	// Due to how the PMBus core device driver sends a clear faults command
	// the bit in STATUS_WORD will likely be cleared when we attempt to examine
	// it for a Thermal Fault or Warning. So, check the STATUS_WORD and the
	// STATUS_TEMPERATURE bits. If either indicates a fault, proceed with
	// logging the over-temperature condition.
	std::uint8_t statusTemperature = 0;
	statusTemperature = pmbusIntf.read(STATUS_TEMPERATURE, Type::Debug);
	if (temperatureFault < FAULT_COUNT)
	{
	if ((statusWord & status_word::TEMPERATURE_FAULT_WARN) \|\|
	(statusTemperature & status_temperature::OT_FAULT))
	{
	temperatureFault++;
	}
	else
	{
	if (temperatureFault > 0)
	{
	temperatureFault = 0;
	}
	}

	if (!faultFound && (temperatureFault >= FAULT_COUNT))
	{
	// The power supply has had an over-temperature condition.
	// This may not result in a shutdown if experienced for a short
	// duration.
	// This should not occur under normal conditions.
	// The power supply may be faulty, or the paired supply may be
	// putting out less current.
	// Capture command responses with potentially relevant information,
	// and call out the power supply reporting the condition.
	util::NamesValues nv;
	nv.add("STATUS_WORD", statusWord);
	captureCmd(nv, STATUS_MFR, Type::Debug);
	captureCmd(nv, STATUS_IOUT, Type::Debug);
	nv.add("STATUS_TEMPERATURE", statusTemperature);
	captureCmd(nv, STATUS_FANS_1_2, Type::Debug);

	using metadata = org::open_power::Witherspoon::Fault::
	PowerSupplyTemperatureFault;

	report<PowerSupplyTemperatureFault>(
	metadata::RAW_STATUS(nv.get().c_str()),
	metadata::CALLOUT_INVENTORY_PATH(inventoryPath.c_str()));

	faultFound = true;
	}
	}
	}

	void PowerSupply::clearFaults()
	{
	readFail = 0;
	readFailLogged = false;
	inputFault = 0;
	powerOnFault = 0;
	outputOCFault = 0;
	outputOVFault = 0;
	fanFault = 0;
	temperatureFault = 0;
	faultFound = false;

	return;
	}

	void PowerSupply::resolveError(const std::string& callout,
	const std::string& message)
	{
	using EndpointList = std::vector<std::string>;

	try
	{
	auto path = callout + "/fault";
	// Get the service name from the mapper for the fault callout
	auto service = util::getService(path, ASSOCIATION_IFACE, bus);

	// Use getProperty utility function to get log entries (endpoints)
	EndpointList logEntries;
	util::getProperty(ASSOCIATION_IFACE, ENDPOINTS_PROP, path, service, bus,
	logEntries);

	// It is possible that all such entries for this callout have since
	// been deleted.
	if (logEntries.empty())
	{
	return;
	}

	auto logEntryService =
	util::getService(logEntries[0], LOGGING_IFACE, bus);
	if (logEntryService.empty())
	{
	return;
	}

	// go through each log entry that matches this callout path
	std::string logMessage;
	for (const auto& logEntry : logEntries)
	{
	// Check to see if this logEntry has a message that matches.
	util::getProperty(LOGGING_IFACE, MESSAGE_PROP, logEntry,
	logEntryService, bus, logMessage);

	if (message == logMessage)
	{
	// Log entry matches call out and message, set Resolved to true
	bool resolved = true;
	util::setProperty(LOGGING_IFACE, RESOLVED_PROP, logEntry,
	logEntryService, bus, resolved);
	}
	}
	}
	catch (std::exception& e)
	{
	log<level::INFO>("Failed to resolve error",
	entry("CALLOUT=%s", callout.c_str()),
	entry("ERROR=%s", message.c_str()));
	}
	}

	void PowerSupply::updateInventory()
	{
	using namespace phosphor::pmbus;
	using namespace sdbusplus::message;

	// Build the object map and send it to the inventory
	using Properties = std::map<std::string, std::variant<std::string>>;
	using Interfaces = std::map<std::string, Properties>;
	using Object = std::map<object_path, Interfaces>;
	Properties assetProps;
	Interfaces interfaces;
	Object object;

	// If any of these accesses fail, the fields will just be
	// blank in the inventory. Leave logging ReadFailure errors
	// to analyze() as it runs continuously and will most
	// likely hit and threshold them first anyway. The
	// readString() function will do the tracing of the failing
	// path so this code doesn't need to.
	for (const auto& fru : fruJson.at("fruConfigs"))
	{
	if (fru.at("interface") == ASSET_IFACE)
	{
	try
	{
	assetProps.emplace(
	fru.at("propertyName"),
	present ? pmbusIntf.readString(fru.at("fileName"),
	inventoryPMBusAccessType)
	: "");
	}
	catch (ReadFailure& e)
	{
	}
	}
	}

	interfaces.emplace(ASSET_IFACE, std::move(assetProps));

	// For Notify(), just send the relative path of the inventory
	// object so remove the INVENTORY_OBJ_PATH prefix
	auto path = inventoryPath.substr(strlen(INVENTORY_OBJ_PATH));

	object.emplace(path, std::move(interfaces));

	try
	{
	auto service =
	util::getService(INVENTORY_OBJ_PATH, INVENTORY_MGR_IFACE, bus);

	if (service.empty())
	{
	log<level::ERR>("Unable to get inventory manager service");
	return;
	}

	auto method = bus.new_method_call(service.c_str(), INVENTORY_OBJ_PATH,
	INVENTORY_MGR_IFACE, "Notify");

	method.append(std::move(object));

	auto reply = bus.call(method);
	}
	catch (std::exception& e)
	{
	log<level::ERR>(e.what(), entry("PATH=%s", inventoryPath.c_str()));
	}
	}

	void PowerSupply::syncHistory()
	{
	using namespace phosphor::gpio;

	if (syncGPIODevPath.empty())
	{
	// Sync not implemented
	return;
	}

	GPIO gpio{syncGPIODevPath, static_cast<gpioNum_t>(syncGPIONumber),
	Direction::output};

	try
	{
	gpio.set(Value::low);

	std::this_thread::sleep_for(std::chrono::milliseconds{5});

	gpio.set(Value::high);

	recordManager->clear();
	}
	catch (std::exception& e)
	{
	// Do nothing. There would already be a journal entry.
	}
	}

	void PowerSupply::enableHistory(const std::string& objectPath,
	size_t numRecords,
	const std::string& syncGPIOPath,
	size_t syncGPIONum)
	{
	historyObjectPath = objectPath;
	syncGPIODevPath = syncGPIOPath;
	syncGPIONumber = syncGPIONum;

	recordManager = std::make_unique<history::RecordManager>(numRecords);

	auto avgPath = historyObjectPath + '/' + history::Average::name;
	auto maxPath = historyObjectPath + '/' + history::Maximum::name;

	average = std::make_unique<history::Average>(bus, avgPath);

	maximum = std::make_unique<history::Maximum>(bus, maxPath);
	}

	void PowerSupply::updateHistory()
	{
	if (!recordManager)
	{
	// Not enabled
	return;
	}

	// Read just the most recent average/max record
	auto data =
	pmbusIntf.readBinary(INPUT_HISTORY, pmbus::Type::HwmonDeviceDebug,
	history::RecordManager::RAW_RECORD_SIZE);

	// Update D-Bus only if something changed (a new record ID, or cleared out)
	auto changed = recordManager->add(data);
	if (changed)
	{
	average->values(std::move(recordManager->getAverageRecords()));
	maximum->values(std::move(recordManager->getMaximumRecords()));
	}
	}

	} // namespace psu
	} // namespace power
	} // namespace phosphor