power-sequencer/ucd90160.hpp - openbmc/phosphor-power - Gitiles

 #pragma once

 #include "device.hpp"
 #include "gpio.hpp"
 #include "pmbus.hpp"
 #include "types.hpp"

 #include <sdbusplus/bus.hpp>

 #include <algorithm>
 #include <filesystem>
 #include <map>
 #include <vector>

 namespace phosphor
 {
 namespace power
 {

 // Error type, callout
 using PartCallout = std::tuple<ucd90160::extraAnalysisType, std::string>;

 /**
  * @class UCD90160
  *
  * This class implements fault analysis for the UCD90160
  * power sequencer device.
  *
  */
 class UCD90160 : public Device
 {
   public:
     UCD90160() = delete;
     ~UCD90160() = default;
     UCD90160(const UCD90160&) = delete;
     UCD90160& operator=(const UCD90160&) = delete;
     UCD90160(UCD90160&&) = default;
     UCD90160& operator=(UCD90160&&) = default;

     /**
      * Constructor
      *
      * @param[in] instance - the device instance number
      * @param[in] bus - D-Bus bus object
      */
     UCD90160(size_t instance, sdbusplus::bus_t& bus);

     /**
      * Analyzes the device for errors when the device is
      * known to be in an error state.  A log will be created.
      */
     void onFailure() override;

     /**
      * Checks the device for errors and only creates a log
      * if one is found.
      */
     void analyze() override;

     /**
      * Clears faults in the device
      */
     void clearFaults() override
     {}

   private:
     /**
      * Reports an error for a GPU PGOOD failure
      *
      * @param[in] callout - the GPU callout string
      */
     void gpuPGOODError(const std::string& callout);

     /**
      * Reports an error for a GPU OverTemp failure
      *
      * @param[in] callout - the GPU callout string
      */
     void gpuOverTempError(const std::string& callout);

     /**
      * Reports an error for a MEM_GOODx failure.
      *
      * @param[in] callout - The MEM callout string
      */
     void memGoodError(const std::string& callout);

     /**
      * Given the device path for a chip, find its gpiochip
      * path
      *
      * @param[in] path - device path, like
      *                   /sys/devices/.../i2c-11/11-0064
      *
      * @return fs::path - The gpiochip path, like
      *                   /dev/gpiochip1
      */
     static std::filesystem::path
         findGPIODevice(const std::filesystem::path& path);

     /**
      * Checks for VOUT faults on the device.
      *
      * This device can monitor voltages of its dependent
      * devices, and VOUT faults are voltage faults
      * on these devices.
      *
      * @return bool - true if an error log was created
      */
     bool checkVOUTFaults();

     /**
      * Checks for PGOOD faults on the device.
      *
      * This device can monitor the PGOOD signals of its dependent
      * devices, and this check will look for faults of
      * those PGOODs.
      *
      * @param[in] polling - If this is running while polling for errors,
      *                      as opposing to analyzing a fail condition.
      *
      * @return bool - true if an error log was created
      */
     bool checkPGOODFaults(bool polling);

     /**
      * Creates an error log when the device has an error
      * but it isn't a PGOOD or voltage failure.
      */
     void createPowerFaultLog();

     /**
      * Reads the status_word register
      *
      * @return uint16_t - the register contents
      */
     uint16_t readStatusWord();

     /**
      * Reads the mfr_status register
      *
      * @return uint32_t - the register contents
      */
     uint32_t readMFRStatus();

     /**
      * Does any additional fault analysis based on the
      * value of the extraAnalysisType field in the GPIOConfig
      * entry.
      *
      * Used to get better callouts.
      *
      * @param[in] config - the GPIOConfig entry to use
      *
      * @return bool - true if a HW error was found, false else
      */
     bool doExtraAnalysis(const ucd90160::GPIConfig& config);

     /**
      * Does additional fault analysis using GPIOs to
      * specifically identify the failing part.
      *
      * Used when there are too many PGOOD inputs for
      * the UCD90160 to handle, so just a summary bit
      * is wired into the chip, and then the specific
      * fault GPIOs are off of a different GPIO device,
      * like an IO expander.
      *
      * @param[in] type - the type of analysis to do
      *
      * @return bool - true if a HW error was found, false else
      */
     bool doGPIOAnalysis(ucd90160::extraAnalysisType type);

     /**
      * Says if we've already logged a Vout fault
      *
      * The policy is only 1 of the same error will
      * be logged for the duration of a class instance.
      *
      * @param[in] page - the page to check
      *
      * @return bool - if we've already logged a fault against
      *                this page
      */
     inline bool isVoutFaultLogged(uint32_t page) const
     {
         return std::find(voutErrors.begin(), voutErrors.end(), page) !=
                voutErrors.end();
     }

     /**
      * Saves that a Vout fault has been logged
      *
      * @param[in] page - the page the error was logged against
      */
     inline void setVoutFaultLogged(uint32_t page)
     {
         voutErrors.push_back(page);
     }

     /**
      * Says if we've already logged a PGOOD fault
      *
      * The policy is only 1 of the same errors will
      * be logged for the duration of a class instance.
      *
      * @param[in] input - the input to check
      *
      * @return bool - if we've already logged a fault against
      *                this input
      */
     inline bool isPGOODFaultLogged(uint32_t input) const
     {
         return std::find(pgoodErrors.begin(), pgoodErrors.end(), input) !=
                pgoodErrors.end();
     }

     /**
      * Says if we've already logged a specific fault
      * against a specific part
      *
      * @param[in] callout - error type and name tuple
      *
      * @return bool - if we've already logged this fault
      *                against this part
      */
     inline bool isPartCalledOut(const PartCallout& callout) const
     {
         return std::find(callouts.begin(), callouts.end(), callout) !=
                callouts.end();
     }

     /**
      * Saves that a PGOOD fault has been logged
      *
      * @param[in] input - the input the error was logged against
      */
     inline void setPGOODFaultLogged(uint32_t input)
     {
         pgoodErrors.push_back(input);
     }

     /**
      * Saves that a specific fault on a specific part has been done
      *
      * @param[in] callout - error type and name tuple
      */
     inline void setPartCallout(const PartCallout& callout)
     {
         callouts.push_back(callout);
     }

     /**
      * List of pages that Vout errors have
      * already been logged against
      */
     std::vector<uint32_t> voutErrors;

     /**
      * List of inputs that PGOOD errors have
      * already been logged against
      */
     std::vector<uint32_t> pgoodErrors;

     /**
      * List of callouts that already been done
      */
     std::vector<PartCallout> callouts;

     /**
      * The read/write interface to this hardware
      */
     pmbus::PMBus interface;

     /**
      * A map of GPI pin IDs to the GPIO object
      * used to access them
      */
     std::map<size_t, std::unique_ptr<gpio::GPIO>> gpios;

     /**
      * Keeps track of device access errors to avoid repeatedly
      * logging errors for bad hardware
      */
     bool accessError = false;

     /**
      * Keeps track of GPIO access errors when doing the in depth
      * PGOOD fault analysis to avoid repeatedly logging errors
      * for bad hardware
      */
     bool gpioAccessError = false;

     /**
      * The path to the GPIO device used to read
      * the GPI (PGOOD) status
      */
     std::filesystem::path gpioDevice;

     /**
      * The D-Bus bus object
      */
     sdbusplus::bus_t& bus;

     /**
      * Map of device instance to the instance specific data
      */
     static const ucd90160::DeviceMap deviceMap;
 };

 } // namespace power
 } // namespace phosphor
	#pragma once

	#include "device.hpp"
	#include "gpio.hpp"
	#include "pmbus.hpp"
	#include "types.hpp"

	#include <sdbusplus/bus.hpp>

	#include <algorithm>
	#include <filesystem>
	#include <map>
	#include <vector>

	namespace phosphor
	{
	namespace power
	{

	// Error type, callout
	using PartCallout = std::tuple<ucd90160::extraAnalysisType, std::string>;

	/**
	* @class UCD90160
	*
	* This class implements fault analysis for the UCD90160
	* power sequencer device.
	*
	*/
	class UCD90160 : public Device
	{
	public:
	UCD90160() = delete;
	~UCD90160() = default;
	UCD90160(const UCD90160&) = delete;
	UCD90160& operator=(const UCD90160&) = delete;
	UCD90160(UCD90160&&) = default;
	UCD90160& operator=(UCD90160&&) = default;

	/**
	* Constructor
	*
	* @param[in] instance - the device instance number
	* @param[in] bus - D-Bus bus object
	*/
	UCD90160(size_t instance, sdbusplus::bus_t& bus);

	/**
	* Analyzes the device for errors when the device is
	* known to be in an error state. A log will be created.
	*/
	void onFailure() override;

	/**
	* Checks the device for errors and only creates a log
	* if one is found.
	*/
	void analyze() override;

	/**
	* Clears faults in the device
	*/
	void clearFaults() override
	{}

	private:
	/**
	* Reports an error for a GPU PGOOD failure
	*
	* @param[in] callout - the GPU callout string
	*/
	void gpuPGOODError(const std::string& callout);

	/**
	* Reports an error for a GPU OverTemp failure
	*
	* @param[in] callout - the GPU callout string
	*/
	void gpuOverTempError(const std::string& callout);

	/**
	* Reports an error for a MEM_GOODx failure.
	*
	* @param[in] callout - The MEM callout string
	*/
	void memGoodError(const std::string& callout);

	/**
	* Given the device path for a chip, find its gpiochip
	* path
	*
	* @param[in] path - device path, like
	* /sys/devices/.../i2c-11/11-0064
	*
	* @return fs::path - The gpiochip path, like
	* /dev/gpiochip1
	*/
	static std::filesystem::path
	findGPIODevice(const std::filesystem::path& path);

	/**
	* Checks for VOUT faults on the device.
	*
	* This device can monitor voltages of its dependent
	* devices, and VOUT faults are voltage faults
	* on these devices.
	*
	* @return bool - true if an error log was created
	*/
	bool checkVOUTFaults();

	/**
	* Checks for PGOOD faults on the device.
	*
	* This device can monitor the PGOOD signals of its dependent
	* devices, and this check will look for faults of
	* those PGOODs.
	*
	* @param[in] polling - If this is running while polling for errors,
	* as opposing to analyzing a fail condition.
	*
	* @return bool - true if an error log was created
	*/
	bool checkPGOODFaults(bool polling);

	/**
	* Creates an error log when the device has an error
	* but it isn't a PGOOD or voltage failure.
	*/
	void createPowerFaultLog();

	/**
	* Reads the status_word register
	*
	* @return uint16_t - the register contents
	*/
	uint16_t readStatusWord();

	/**
	* Reads the mfr_status register
	*
	* @return uint32_t - the register contents
	*/
	uint32_t readMFRStatus();

	/**
	* Does any additional fault analysis based on the
	* value of the extraAnalysisType field in the GPIOConfig
	* entry.
	*
	* Used to get better callouts.
	*
	* @param[in] config - the GPIOConfig entry to use
	*
	* @return bool - true if a HW error was found, false else
	*/
	bool doExtraAnalysis(const ucd90160::GPIConfig& config);

	/**
	* Does additional fault analysis using GPIOs to
	* specifically identify the failing part.
	*
	* Used when there are too many PGOOD inputs for
	* the UCD90160 to handle, so just a summary bit
	* is wired into the chip, and then the specific
	* fault GPIOs are off of a different GPIO device,
	* like an IO expander.
	*
	* @param[in] type - the type of analysis to do
	*
	* @return bool - true if a HW error was found, false else
	*/
	bool doGPIOAnalysis(ucd90160::extraAnalysisType type);

	/**
	* Says if we've already logged a Vout fault
	*
	* The policy is only 1 of the same error will
	* be logged for the duration of a class instance.
	*
	* @param[in] page - the page to check
	*
	* @return bool - if we've already logged a fault against
	* this page
	*/
	inline bool isVoutFaultLogged(uint32_t page) const
	{
	return std::find(voutErrors.begin(), voutErrors.end(), page) !=
	voutErrors.end();
	}

	/**
	* Saves that a Vout fault has been logged
	*
	* @param[in] page - the page the error was logged against
	*/
	inline void setVoutFaultLogged(uint32_t page)
	{
	voutErrors.push_back(page);
	}

	/**
	* Says if we've already logged a PGOOD fault
	*
	* The policy is only 1 of the same errors will
	* be logged for the duration of a class instance.
	*
	* @param[in] input - the input to check
	*
	* @return bool - if we've already logged a fault against
	* this input
	*/
	inline bool isPGOODFaultLogged(uint32_t input) const
	{
	return std::find(pgoodErrors.begin(), pgoodErrors.end(), input) !=
	pgoodErrors.end();
	}

	/**
	* Says if we've already logged a specific fault
	* against a specific part
	*
	* @param[in] callout - error type and name tuple
	*
	* @return bool - if we've already logged this fault
	* against this part
	*/
	inline bool isPartCalledOut(const PartCallout& callout) const
	{
	return std::find(callouts.begin(), callouts.end(), callout) !=
	callouts.end();
	}

	/**
	* Saves that a PGOOD fault has been logged
	*
	* @param[in] input - the input the error was logged against
	*/
	inline void setPGOODFaultLogged(uint32_t input)
	{
	pgoodErrors.push_back(input);
	}

	/**
	* Saves that a specific fault on a specific part has been done
	*
	* @param[in] callout - error type and name tuple
	*/
	inline void setPartCallout(const PartCallout& callout)
	{
	callouts.push_back(callout);
	}

	/**
	* List of pages that Vout errors have
	* already been logged against
	*/
	std::vector<uint32_t> voutErrors;

	/**
	* List of inputs that PGOOD errors have
	* already been logged against
	*/
	std::vector<uint32_t> pgoodErrors;

	/**
	* List of callouts that already been done
	*/
	std::vector<PartCallout> callouts;

	/**
	* The read/write interface to this hardware
	*/
	pmbus::PMBus interface;

	/**
	* A map of GPI pin IDs to the GPIO object
	* used to access them
	*/
	std::map<size_t, std::unique_ptr<gpio::GPIO>> gpios;

	/**
	* Keeps track of device access errors to avoid repeatedly
	* logging errors for bad hardware
	*/
	bool accessError = false;

	/**
	* Keeps track of GPIO access errors when doing the in depth
	* PGOOD fault analysis to avoid repeatedly logging errors
	* for bad hardware
	*/
	bool gpioAccessError = false;

	/**
	* The path to the GPIO device used to read
	* the GPI (PGOOD) status
	*/
	std::filesystem::path gpioDevice;

	/**
	* The D-Bus bus object
	*/
	sdbusplus::bus_t& bus;

	/**
	* Map of device instance to the instance specific data
	*/
	static const ucd90160::DeviceMap deviceMap;
	};

	} // namespace power
	} // namespace phosphor