blob: c798f510d948f9e3f84233e2e43d00fc366592ec [file] [log] [blame]
#pragma once
#include <filesystem>
#include <string>
#include <vector>
namespace phosphor
{
namespace pmbus
{
namespace fs = std::filesystem;
// The file name Linux uses to capture the READ_VIN from pmbus.
constexpr auto READ_VIN = "in1_input";
// The file name Linux uses to capture the MFR_POUT_MAX from pmbus.
constexpr auto MFR_POUT_MAX = "max_power_out";
// The max_power_out value expected to be read for 1400W IBM CFFPS type.
constexpr auto IBM_CFFPS_1400W = 30725;
namespace in_input
{
// VIN thresholds in Volts
constexpr auto VIN_VOLTAGE_MIN = 20;
constexpr auto VIN_VOLTAGE_110_THRESHOLD = 160;
// VIN actual values in Volts
// VIN_VOLTAGE_0: VIN < VIN_VOLTAGE_MIN
// VIN_VOLTAGE_110: VIN_VOLTAGE_MIN < VIN < VIN_VOLTAGE_110_THRESHOLD
// VIN_VOLTAGE_220: VIN_VOLTAGE_110_THRESHOLD < VIN
constexpr auto VIN_VOLTAGE_0 = 0;
constexpr auto VIN_VOLTAGE_110 = 110;
constexpr auto VIN_VOLTAGE_220 = 220;
} // namespace in_input
// The file name Linux uses to capture the STATUS_WORD from pmbus.
constexpr auto STATUS_WORD = "status0";
// The file name Linux uses to capture the STATUS_INPUT from pmbus.
constexpr auto STATUS_INPUT = "status0_input";
// Voltage out status.
// Overvoltage fault or warning, Undervoltage fault or warning, maximum or
// minimum warning, ....
// Uses Page substitution
constexpr auto STATUS_VOUT = "statusP_vout";
namespace status_vout
{
// Mask of bits that are only warnings
constexpr auto WARNING_MASK = 0x6A;
} // namespace status_vout
// Current output status bits.
constexpr auto STATUS_IOUT = "status0_iout";
// Manufacturing specific status bits
constexpr auto STATUS_MFR = "status0_mfr";
// Reports on the status of any fans installed in position 1 and 2.
constexpr auto STATUS_FANS_1_2 = "status0_fan12";
// Reports on temperature faults or warnings. Overtemperature fault,
// overtemperature warning, undertemperature warning, undertemperature fault.
constexpr auto STATUS_TEMPERATURE = "status0_temp";
// Reports on the communication, memory, logic fault(s).
constexpr auto STATUS_CML = "status0_cml";
namespace status_word
{
constexpr auto VOUT_FAULT = 0x8000;
// The IBM CFF power supply driver does map this bit to power1_alarm in the
// hwmon space, but since the other bits that need to be checked do not have
// a similar mapping, the code will just read STATUS_WORD and use bit masking
// to see if the INPUT FAULT OR WARNING bit is on.
constexpr auto INPUT_FAULT_WARN = 0x2000;
// The bit mask representing the MFRSPECIFIC fault, bit 4 of STATUS_WORD high
// byte. A manufacturer specific fault or warning has occurred.
constexpr auto MFR_SPECIFIC_FAULT = 0x1000;
// The bit mask representing the POWER_GOOD Negated bit of the STATUS_WORD.
constexpr auto POWER_GOOD_NEGATED = 0x0800;
// The bit mask representing the FAN FAULT or WARNING bit of the STATUS_WORD.
// Bit 2 of the high byte of STATUS_WORD.
constexpr auto FAN_FAULT = 0x0400;
// The bit mask representing the UNITI_IS_OFF bit of the STATUS_WORD.
constexpr auto UNIT_IS_OFF = 0x0040;
// Bit 5 of the STATUS_BYTE, or lower byte of STATUS_WORD is used to indicate
// an output overvoltage fault.
constexpr auto VOUT_OV_FAULT = 0x0020;
// The bit mask representing that an output overcurrent fault has occurred.
constexpr auto IOUT_OC_FAULT = 0x0010;
// The IBM CFF power supply driver does map this bit to in1_alarm, however,
// since a number of the other bits are not mapped that way for STATUS_WORD,
// this code will just read the entire STATUS_WORD and use bit masking to find
// out if that fault is on.
constexpr auto VIN_UV_FAULT = 0x0008;
// The bit mask representing the TEMPERATURE FAULT or WARNING bit of the
// STATUS_WORD. Bit 2 of the low byte (STATUS_BYTE).
constexpr auto TEMPERATURE_FAULT_WARN = 0x0004;
// The bit mask representing the CML (Communication, Memory, and/or Logic) fault
// bit of the STATUS_WORD. Bit 1 of the low byte (STATUS_BYTE).
constexpr auto CML_FAULT = 0x0002;
} // namespace status_word
namespace status_vout
{
// The IBM CFF power supply driver maps MFR's OV_FAULT and VAUX_FAULT to this
// bit.
constexpr auto OV_FAULT = 0x80;
// The IBM CFF power supply driver maps MFR's UV_FAULT to this bit.
constexpr auto UV_FAULT = 0x10;
} // namespace status_vout
namespace status_temperature
{
// Overtemperature Fault
constexpr auto OT_FAULT = 0x80;
} // namespace status_temperature
constexpr auto ON_OFF_CONFIG = "on_off_config";
// From PMBus Specification Part II Revsion 1.2:
// The ON_OFF_CONFIG command configures the combination of CONTROL pin input
// and serial bus commands needed to turn the unit on and off. This includes how
// the unit responds when power is applied.
// Bits [7:5] - 000 - Reserved
// Bit 4 - 1 - Unit does not power up until commanded by the CONTROL pin and
// OPERATION command (as programmed in bits [3:0]).
// Bit 3 - 0 - Unit ignores the on/off portion of the OPERATION command from
// serial bus.
// Bit 2 - 1 - Unit requires the CONTROL pin to be asserted to start the unit.
// Bit 1 - 0 - Polarity of the CONTROL pin. Active low (Pull pin low to start
// the unit).
// Bit 0 - 1 - Turn off the output and stop transferring energy to the output as
// fast as possible.
constexpr auto ON_OFF_CONFIG_CONTROL_PIN_ONLY = 0x15;
/**
* Where the access should be done
*/
enum class Type
{
Base, // base device directory
Hwmon, // hwmon directory
Debug, // pmbus debug directory
DeviceDebug, // device debug directory
HwmonDeviceDebug // hwmon device debug directory
};
/**
* @class PMBusBase
*
* This is a base class for PMBus to assist with unit testing via mocking.
*/
class PMBusBase
{
public:
virtual ~PMBusBase() = default;
virtual uint64_t read(const std::string& name, Type type,
bool errTrace = true) = 0;
virtual std::string readString(const std::string& name, Type type) = 0;
virtual std::vector<uint8_t> readBinary(const std::string& name, Type type,
size_t length) = 0;
virtual void writeBinary(const std::string& name, std::vector<uint8_t> data,
Type type) = 0;
virtual void findHwmonDir() = 0;
virtual const fs::path& path() const = 0;
virtual std::string insertPageNum(const std::string& templateName,
size_t page) = 0;
virtual fs::path getPath(Type type) = 0;
};
/**
* Wrapper function for PMBus
*
* @param[in] bus - I2C bus
* @param[in] address - I2C address (as a 2-byte string, e.g. 0069)
*
* @return PMBusBase pointer
*/
std::unique_ptr<PMBusBase> createPMBus(std::uint8_t bus,
const std::string& address);
/**
* @class PMBus
*
* This class is an interface to communicating with PMBus devices
* by reading and writing sysfs files.
*
* Based on the Type parameter, the accesses can either be done
* in the base device directory (the one passed into the constructor),
* or in the hwmon directory for the device.
*/
class PMBus : public PMBusBase
{
public:
PMBus() = delete;
virtual ~PMBus() = default;
PMBus(const PMBus&) = default;
PMBus& operator=(const PMBus&) = default;
PMBus(PMBus&&) = default;
PMBus& operator=(PMBus&&) = default;
/**
* Constructor
*
* @param[in] path - path to the sysfs directory
*/
PMBus(const std::string& path) : basePath(path)
{
findHwmonDir();
}
/**
* Constructor
*
* This version is required when DeviceDebug
* access will be used.
*
* @param[in] path - path to the sysfs directory
* @param[in] driverName - the device driver name
* @param[in] instance - chip instance number
*/
PMBus(const std::string& path, const std::string& driverName,
size_t instance) :
basePath(path), driverName(driverName), instance(instance)
{
findHwmonDir();
}
/**
* Wrapper function for PMBus
*
* @param[in] bus - I2C bus
* @param[in] address - I2C address (as a 2-byte string, e.g. 0069)
*
* @return PMBusBase pointer
*/
static std::unique_ptr<PMBusBase>
createPMBus(std::uint8_t bus, const std::string& address);
/**
* Reads a file in sysfs that represents a single bit,
* therefore doing a PMBus read.
*
* @param[in] name - path concatenated to
* basePath to read
* @param[in] type - Path type
*
* @return bool - false if result was 0, else true
*/
bool readBit(const std::string& name, Type type);
/**
* Reads a file in sysfs that represents a single bit,
* where the page number passed in is substituted
* into the name in place of the 'P' character in it.
*
* @param[in] name - path concatenated to
* basePath to read
* @param[in] page - page number
* @param[in] type - Path type
*
* @return bool - false if result was 0, else true
*/
bool readBitInPage(const std::string& name, size_t page, Type type);
/**
* Checks if the file for the given name and type exists.
*
* @param[in] name - path concatenated to basePath to read
* @param[in] type - Path type
*
* @return bool - True if file exists, false if it does not.
*/
bool exists(const std::string& name, Type type);
/**
* Read byte(s) from file in sysfs.
*
* @param[in] name - path concatenated to basePath to read
* @param[in] type - Path type
* @param[in] errTrace - true to enable tracing error (defaults to true)
*
* @return uint64_t - Up to 8 bytes of data read from file.
*/
uint64_t read(const std::string& name, Type type,
bool errTrace = true) override;
/**
* Read a string from file in sysfs.
*
* @param[in] name - path concatenated to basePath to read
* @param[in] type - Path type
*
* @return string - The data read from the file.
*/
std::string readString(const std::string& name, Type type) override;
/**
* Read data from a binary file in sysfs.
*
* @param[in] name - path concatenated to basePath to read
* @param[in] type - Path type
* @param[in] length - length of data to read, in bytes
*
* @return vector<uint8_t> - The data read from the file.
*/
std::vector<uint8_t> readBinary(const std::string& name, Type type,
size_t length);
/**
* Writes an integer value to the file, therefore doing
* a PMBus write.
*
* @param[in] name - path concatenated to
* basePath to write
* @param[in] value - the value to write
* @param[in] type - Path type
*/
void write(const std::string& name, int value, Type type);
/**
* Writes binary data to a file in sysfs.
*
* @param[in] name - path concatenated to basePath to write
* @param[in] data - The data to write to the file
* @param[in] type - Path type
*/
void writeBinary(const std::string& name, std::vector<uint8_t> data,
Type type) override;
/**
* Returns the sysfs base path of this device
*/
const fs::path& path() const override
{
return basePath;
}
/**
* Replaces the 'P' in the string passed in with
* the page number passed in.
*
* For example:
* insertPageNum("inP_enable", 42)
* returns "in42_enable"
*
* @param[in] templateName - the name string, with a 'P' in it
* @param[in] page - the page number to insert where the P was
*
* @return string - the new string with the page number in it
*/
std::string insertPageNum(const std::string& templateName,
size_t page) override;
/**
* Finds the path relative to basePath to the hwmon directory
* for the device and stores it in hwmonRelPath.
*/
void findHwmonDir() override;
/**
* Returns the path to use for the passed in type.
*
* @param[in] type - Path type
*
* @return fs::path - the full path
*/
fs::path getPath(Type type) override;
private:
/**
* Returns the device name
*
* This is found in the 'name' file in basePath.
*
* @return string - the device name
*/
std::string getDeviceName();
/**
* The sysfs device path
*/
fs::path basePath;
/**
* The directory name under the basePath hwmon directory
*/
fs::path hwmonDir;
/**
* The device driver name. Used for finding the device
* debug directory. Not required if that directory
* isn't used.
*/
std::string driverName;
/**
* The device instance number.
*
* Used in conjunction with the driver name for finding
* the debug directory. Not required if that directory
* isn't used.
*/
size_t instance = 0;
/**
* The pmbus debug path with status files
*/
const fs::path debugPath = "/sys/kernel/debug/";
};
} // namespace pmbus
} // namespace phosphor