blob: 089e6eeeb633f225223132bbc73cc0bb94f40391 [file] [log] [blame]
/**
* Copyright © 2019 IBM Corporation
*
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
#include "action.hpp"
#include "chassis.hpp"
#include "configuration.hpp"
#include "device.hpp"
#include "i2c_interface.hpp"
#include "mock_action.hpp"
#include "mock_journal.hpp"
#include "mock_services.hpp"
#include "mocked_i2c_interface.hpp"
#include "pmbus_read_sensor_action.hpp"
#include "presence_detection.hpp"
#include "rail.hpp"
#include "rule.hpp"
#include "sensor_monitoring.hpp"
#include "system.hpp"
#include <memory>
#include <optional>
#include <utility>
#include <vector>
#include <gmock/gmock.h>
#include <gtest/gtest.h>
using namespace phosphor::power::regulators;
using ::testing::A;
using ::testing::Return;
using ::testing::TypedEq;
TEST(RailTests, Constructor)
{
// Test where only required parameters are specified
{
Rail rail{"vdd0"};
EXPECT_EQ(rail.getID(), "vdd0");
EXPECT_EQ(rail.getConfiguration(), nullptr);
EXPECT_EQ(rail.getSensorMonitoring(), nullptr);
}
// Test where all parameters are specified
{
// Create Configuration
std::optional<double> volts{1.3};
std::vector<std::unique_ptr<Action>> actions{};
actions.push_back(std::make_unique<MockAction>());
actions.push_back(std::make_unique<MockAction>());
std::unique_ptr<Configuration> configuration =
std::make_unique<Configuration>(volts, std::move(actions));
// Create SensorMonitoring
actions.clear();
actions.push_back(std::make_unique<MockAction>());
std::unique_ptr<SensorMonitoring> sensorMonitoring =
std::make_unique<SensorMonitoring>(std::move(actions));
// Create Rail
Rail rail{"vddr1", std::move(configuration),
std::move(sensorMonitoring)};
EXPECT_EQ(rail.getID(), "vddr1");
EXPECT_NE(rail.getConfiguration(), nullptr);
EXPECT_EQ(rail.getConfiguration()->getVolts().has_value(), true);
EXPECT_EQ(rail.getConfiguration()->getVolts().value(), 1.3);
EXPECT_EQ(rail.getConfiguration()->getActions().size(), 2);
EXPECT_NE(rail.getSensorMonitoring(), nullptr);
EXPECT_EQ(rail.getSensorMonitoring()->getActions().size(), 1);
}
}
TEST(RailTests, Configure)
{
// Test where Configuration was not specified in constructor
{
// Create mock services. No logging should occur.
MockServices services{};
MockJournal& journal = services.getMockJournal();
EXPECT_CALL(journal, logDebug(A<const std::string&>())).Times(0);
EXPECT_CALL(journal, logError(A<const std::string&>())).Times(0);
// Create Rail
std::unique_ptr<Rail> rail = std::make_unique<Rail>("vdd0");
Rail* railPtr = rail.get();
// Create Device that contains Rail
std::unique_ptr<i2c::MockedI2CInterface> i2cInterface =
std::make_unique<i2c::MockedI2CInterface>();
std::unique_ptr<PresenceDetection> presenceDetection{};
std::unique_ptr<Configuration> deviceConfiguration{};
std::vector<std::unique_ptr<Rail>> rails{};
rails.emplace_back(std::move(rail));
std::unique_ptr<Device> device = std::make_unique<Device>(
"reg1", true,
"/xyz/openbmc_project/inventory/system/chassis/motherboard/reg1",
std::move(i2cInterface), std::move(presenceDetection),
std::move(deviceConfiguration), std::move(rails));
Device* devicePtr = device.get();
// Create Chassis that contains Device
std::vector<std::unique_ptr<Device>> devices{};
devices.emplace_back(std::move(device));
std::unique_ptr<Chassis> chassis =
std::make_unique<Chassis>(1, std::move(devices));
Chassis* chassisPtr = chassis.get();
// Create System that contains Chassis
std::vector<std::unique_ptr<Rule>> rules{};
std::vector<std::unique_ptr<Chassis>> chassisVec{};
chassisVec.emplace_back(std::move(chassis));
System system{std::move(rules), std::move(chassisVec)};
// Call configure().
railPtr->configure(services, system, *chassisPtr, *devicePtr);
}
// Test where Configuration was specified in constructor
{
// Create mock services. Expect logDebug() to be called.
MockServices services{};
MockJournal& journal = services.getMockJournal();
EXPECT_CALL(journal, logDebug("Configuring vddr1: volts=1.300000"))
.Times(1);
EXPECT_CALL(journal, logError(A<const std::string&>())).Times(0);
// Create Configuration
std::optional<double> volts{1.3};
std::unique_ptr<MockAction> action = std::make_unique<MockAction>();
EXPECT_CALL(*action, execute).Times(1).WillOnce(Return(true));
std::vector<std::unique_ptr<Action>> actions{};
actions.emplace_back(std::move(action));
std::unique_ptr<Configuration> configuration =
std::make_unique<Configuration>(volts, std::move(actions));
// Create Rail
std::unique_ptr<Rail> rail =
std::make_unique<Rail>("vddr1", std::move(configuration));
Rail* railPtr = rail.get();
// Create Device that contains Rail
std::unique_ptr<i2c::MockedI2CInterface> i2cInterface =
std::make_unique<i2c::MockedI2CInterface>();
std::unique_ptr<PresenceDetection> presenceDetection{};
std::unique_ptr<Configuration> deviceConfiguration{};
std::vector<std::unique_ptr<Rail>> rails{};
rails.emplace_back(std::move(rail));
std::unique_ptr<Device> device = std::make_unique<Device>(
"reg1", true,
"/xyz/openbmc_project/inventory/system/chassis/motherboard/reg1",
std::move(i2cInterface), std::move(presenceDetection),
std::move(deviceConfiguration), std::move(rails));
Device* devicePtr = device.get();
// Create Chassis that contains Device
std::vector<std::unique_ptr<Device>> devices{};
devices.emplace_back(std::move(device));
std::unique_ptr<Chassis> chassis =
std::make_unique<Chassis>(1, std::move(devices));
Chassis* chassisPtr = chassis.get();
// Create System that contains Chassis
std::vector<std::unique_ptr<Rule>> rules{};
std::vector<std::unique_ptr<Chassis>> chassisVec{};
chassisVec.emplace_back(std::move(chassis));
System system{std::move(rules), std::move(chassisVec)};
// Call configure().
railPtr->configure(services, system, *chassisPtr, *devicePtr);
}
}
TEST(RailTests, GetConfiguration)
{
// Test where Configuration was not specified in constructor
{
Rail rail{"vdd0"};
EXPECT_EQ(rail.getConfiguration(), nullptr);
}
// Test where Configuration was specified in constructor
{
// Create Configuration
std::optional<double> volts{3.2};
std::vector<std::unique_ptr<Action>> actions{};
actions.push_back(std::make_unique<MockAction>());
std::unique_ptr<Configuration> configuration =
std::make_unique<Configuration>(volts, std::move(actions));
// Create Rail
Rail rail{"vddr1", std::move(configuration)};
EXPECT_NE(rail.getConfiguration(), nullptr);
EXPECT_EQ(rail.getConfiguration()->getVolts().has_value(), true);
EXPECT_EQ(rail.getConfiguration()->getVolts().value(), 3.2);
EXPECT_EQ(rail.getConfiguration()->getActions().size(), 1);
}
}
TEST(RailTests, GetID)
{
Rail rail{"vio2"};
EXPECT_EQ(rail.getID(), "vio2");
}
TEST(RailTests, MonitorSensors)
{
// Test where SensorMonitoring was not specified in constructor
{
// Create mock services. No logging should occur.
MockServices services{};
MockJournal& journal = services.getMockJournal();
EXPECT_CALL(journal, logDebug(A<const std::string&>())).Times(0);
EXPECT_CALL(journal, logError(A<const std::string&>())).Times(0);
// Create mock I2CInterface. A two-byte read should NOT occur.
std::unique_ptr<i2c::MockedI2CInterface> i2cInterface =
std::make_unique<i2c::MockedI2CInterface>();
EXPECT_CALL(*i2cInterface, read(A<uint8_t>(), A<uint16_t&>())).Times(0);
// Create Rail
std::unique_ptr<Rail> rail = std::make_unique<Rail>("vdd0");
Rail* railPtr = rail.get();
// Create Device that contains Rail
std::unique_ptr<PresenceDetection> presenceDetection{};
std::unique_ptr<Configuration> deviceConfiguration{};
std::vector<std::unique_ptr<Rail>> rails{};
rails.emplace_back(std::move(rail));
std::unique_ptr<Device> device = std::make_unique<Device>(
"reg1", true,
"/xyz/openbmc_project/inventory/system/chassis/motherboard/reg1",
std::move(i2cInterface), std::move(presenceDetection),
std::move(deviceConfiguration), std::move(rails));
Device* devicePtr = device.get();
// Create Chassis that contains Device
std::vector<std::unique_ptr<Device>> devices{};
devices.emplace_back(std::move(device));
std::unique_ptr<Chassis> chassis =
std::make_unique<Chassis>(1, std::move(devices));
Chassis* chassisPtr = chassis.get();
// Create System that contains Chassis
std::vector<std::unique_ptr<Rule>> rules{};
std::vector<std::unique_ptr<Chassis>> chassisVec{};
chassisVec.emplace_back(std::move(chassis));
System system{std::move(rules), std::move(chassisVec)};
// Call monitorSensors().
railPtr->monitorSensors(services, system, *chassisPtr, *devicePtr);
}
// Test where SensorMonitoring was specified in constructor
{
// Create mock services. No logging should occur.
MockServices services{};
MockJournal& journal = services.getMockJournal();
EXPECT_CALL(journal, logDebug(A<const std::string&>())).Times(0);
EXPECT_CALL(journal, logError(A<const std::string&>())).Times(0);
// Create PMBusReadSensorAction
pmbus_utils::SensorValueType type{pmbus_utils::SensorValueType::iout};
uint8_t command = 0x8C;
pmbus_utils::SensorDataFormat format{
pmbus_utils::SensorDataFormat::linear_11};
std::optional<int8_t> exponent{};
std::unique_ptr<PMBusReadSensorAction> action =
std::make_unique<PMBusReadSensorAction>(type, command, format,
exponent);
// Create mock I2CInterface. A two-byte read should occur.
std::unique_ptr<i2c::MockedI2CInterface> i2cInterface =
std::make_unique<i2c::MockedI2CInterface>();
EXPECT_CALL(*i2cInterface, isOpen).Times(1).WillOnce(Return(true));
EXPECT_CALL(*i2cInterface, read(TypedEq<uint8_t>(0x8C), A<uint16_t&>()))
.Times(1);
// Create SensorMonitoring
std::vector<std::unique_ptr<Action>> actions{};
actions.emplace_back(std::move(action));
std::unique_ptr<SensorMonitoring> sensorMonitoring =
std::make_unique<SensorMonitoring>(std::move(actions));
// Create Rail
std::unique_ptr<Configuration> configuration{};
std::unique_ptr<Rail> rail = std::make_unique<Rail>(
"vddr1", std::move(configuration), std::move(sensorMonitoring));
Rail* railPtr = rail.get();
// Create Device that contains Rail
std::unique_ptr<PresenceDetection> presenceDetection{};
std::unique_ptr<Configuration> deviceConfiguration{};
std::vector<std::unique_ptr<Rail>> rails{};
rails.emplace_back(std::move(rail));
std::unique_ptr<Device> device = std::make_unique<Device>(
"reg1", true,
"/xyz/openbmc_project/inventory/system/chassis/motherboard/reg1",
std::move(i2cInterface), std::move(presenceDetection),
std::move(deviceConfiguration), std::move(rails));
Device* devicePtr = device.get();
// Create Chassis that contains Device
std::vector<std::unique_ptr<Device>> devices{};
devices.emplace_back(std::move(device));
std::unique_ptr<Chassis> chassis =
std::make_unique<Chassis>(1, std::move(devices));
Chassis* chassisPtr = chassis.get();
// Create System that contains Chassis
std::vector<std::unique_ptr<Rule>> rules{};
std::vector<std::unique_ptr<Chassis>> chassisVec{};
chassisVec.emplace_back(std::move(chassis));
System system{std::move(rules), std::move(chassisVec)};
// Call monitorSensors().
railPtr->monitorSensors(services, system, *chassisPtr, *devicePtr);
}
}
TEST(RailTests, GetSensorMonitoring)
{
// Test where SensorMonitoring was not specified in constructor
{
Rail rail{"vdd0", nullptr, nullptr};
EXPECT_EQ(rail.getSensorMonitoring(), nullptr);
}
// Test where SensorMonitoring was specified in constructor
{
std::unique_ptr<Configuration> configuration{};
// Create SensorMonitoring
std::vector<std::unique_ptr<Action>> actions{};
actions.push_back(std::make_unique<MockAction>());
actions.push_back(std::make_unique<MockAction>());
std::unique_ptr<SensorMonitoring> sensorMonitoring =
std::make_unique<SensorMonitoring>(std::move(actions));
// Create Rail
Rail rail{"vddr1", std::move(configuration),
std::move(sensorMonitoring)};
EXPECT_NE(rail.getSensorMonitoring(), nullptr);
EXPECT_EQ(rail.getSensorMonitoring()->getActions().size(), 2);
}
}