phosphor-power-supply/psu_manager.hpp - openbmc/phosphor-power - Gitiles

 #pragma once

 #include "power_supply.hpp"
 #include "types.hpp"
 #include "utility.hpp"

 #include <phosphor-logging/log.hpp>
 #include <sdbusplus/bus/match.hpp>
 #include <sdbusplus/server/manager.hpp>
 #include <sdbusplus/server/object.hpp>
 #include <sdeventplus/event.hpp>
 #include <sdeventplus/utility/timer.hpp>
 #include <xyz/openbmc_project/State/Decorator/PowerSystemInputs/server.hpp>

 struct sys_properties
 {
     int powerSupplyCount;
     std::vector<uint64_t> inputVoltage;
     bool powerConfigFullLoad;
 };

 using namespace phosphor::power::psu;
 using namespace phosphor::logging;

 namespace phosphor::power::manager
 {

 using PowerSystemInputsInterface = sdbusplus::xyz::openbmc_project::State::
     Decorator::server::PowerSystemInputs;
 using PowerSystemInputsObject =
     sdbusplus::server::object_t<PowerSystemInputsInterface>;

 // Validation timeout. Allow 10s to detect if new EM interfaces show up in D-Bus
 // before performing the validation.
 constexpr auto validationTimeout = std::chrono::seconds(10);

 /**
  * @class PowerSystemInputs
  * @brief A concrete implementation for the PowerSystemInputs interface.
  */
 class PowerSystemInputs : public PowerSystemInputsObject
 {
   public:
     PowerSystemInputs(sdbusplus::bus::bus& bus, const std::string& path) :
         PowerSystemInputsObject(bus, path.c_str())
     {}
 };

 /**
  * @class PSUManager
  *
  * This class will create an object used to manage and monitor a list of power
  * supply devices.
  */
 class PSUManager
 {
   public:
     PSUManager() = delete;
     ~PSUManager() = default;
     PSUManager(const PSUManager&) = delete;
     PSUManager& operator=(const PSUManager&) = delete;
     PSUManager(PSUManager&&) = delete;
     PSUManager& operator=(PSUManager&&) = delete;

     /**
      * Constructor to read configuration from D-Bus.
      *
      * @param[in] bus - D-Bus bus object
      * @param[in] e - event object
      */
     PSUManager(sdbusplus::bus::bus& bus, const sdeventplus::Event& e);

     /**
      * Get PSU properties from D-Bus, use that to build a power supply
      * object.
      *
      * @param[in] properties - A map of property names and values
      *
      */
     void getPSUProperties(util::DbusPropertyMap& properties);

     /**
      * Get PSU configuration from D-Bus
      */
     void getPSUConfiguration();

     /**
      * @brief Initialize the system properties from the Supported Configuration
      *        D-Bus object provided by Entity Manager.
      */
     void getSystemProperties();

     /**
      * Initializes the manager.
      *
      * Get current BMC state, ...
      */
     void initialize();

     /**
      * Starts the timer to start monitoring the list of devices.
      */
     int run()
     {
         return timer->get_event().loop();
     }

     /**
      * Write PMBus ON_OFF_CONFIG
      *
      * This function will be called to cause the PMBus device driver to send the
      * ON_OFF_CONFIG command. Takes one byte of data.
      */
     void onOffConfig(const uint8_t data)
     {
         for (auto& psu : psus)
         {
             psu->onOffConfig(data);
         }
     }

     /**
      * This function will be called in various situations in order to clear
      * any fault status bits that may have been set, in order to start over
      * with a clean state. Presence changes and power state changes will want
      * to clear any faults logged.
      */
     void clearFaults()
     {
         setPowerSupplyError("");
         for (auto& psu : psus)
         {
             psu->clearFaults();
         }
     }

   private:
     /**
      * The D-Bus object
      */
     sdbusplus::bus::bus& bus;

     /**
      * The timer that runs to periodically check the power supplies.
      */
     std::unique_ptr<
         sdeventplus::utility::Timer<sdeventplus::ClockId::Monotonic>>
         timer;

     /**
      * The timer that performs power supply validation as the entity manager
      * interfaces show up in d-bus.
      */
     std::unique_ptr<
         sdeventplus::utility::Timer<sdeventplus::ClockId::Monotonic>>
         validationTimer;

     /**
      * Let power control/sequencer application know of PSU error(s).
      *
      * @param[in] psuErrorString - string for power supply error
      */
     void setPowerSupplyError(const std::string& psuErrorString);

     /**
      * Create an error
      *
      * @param[in] faultName - 'name' message for the BMC error log entry
      * @param[in,out] additionalData - The AdditionalData property for the error
      */
     void createError(const std::string& faultName,
                      std::map<std::string, std::string>& additionalData);

     /**
      * Analyze the status of each of the power supplies.
      *
      * Log errors for faults, when and where appropriate.
      */
     void analyze();

     /** @brief True if the power is on. */
     bool powerOn = false;

     /** @brief True if power control is in the window between chassis pgood loss
      * and power off. */
     bool powerFaultOccurring = false;

     /** @brief True if an error for a brownout has already been logged. */
     bool brownoutLogged = false;

     /** @brief Used as part of subscribing to power on state changes*/
     std::string powerService;

     /** @brief Used to subscribe to D-Bus power on state changes */
     std::unique_ptr<sdbusplus::bus::match_t> powerOnMatch;

     /** @brief Used to subscribe to D-Bus power supply presence changes */
     std::vector<std::unique_ptr<sdbusplus::bus::match_t>> presenceMatches;

     /** @brief Used to subscribe to Entity Manager interfaces added */
     std::unique_ptr<sdbusplus::bus::match_t> entityManagerIfacesAddedMatch;

     /**
      * @brief Callback for power state property changes
      *
      * Process changes to the powered on state property for the system.
      *
      * @param[in] msg - Data associated with the power state signal
      */
     void powerStateChanged(sdbusplus::message::message& msg);

     /**
      * @brief Callback for inventory property changes
      *
      * Process change of the Present property for power supply.
      *
      * @param[in]  msg - Data associated with the Present change signal
      **/
     void presenceChanged(sdbusplus::message::message& msg);

     /**
      * @brief Callback for entity-manager interface added
      *
      * Process the information from the supported configuration and or IBM CFFPS
      * Connector interface being added.
      *
      * @param[in] msg - Data associated with the interfaces added signal
      */
     void entityManagerIfaceAdded(sdbusplus::message::message& msg);

     /**
      * @brief Adds properties to the inventory.
      *
      * Reads the values from the devices and writes them to the associated
      * power supply D-Bus inventory objects.
      *
      * This needs to be done on startup, and each time the presence state
      * changes.
      */
     void updateInventory()
     {
         for (auto& psu : psus)
         {
             psu->updateInventory();
         }
     }

     /**
      * @brief Helper function to populate the system properties
      *
      * @param[in] properties - A map of property names and values
      */
     void populateSysProperties(const util::DbusPropertyMap& properties);

     /**
      * @brief Update inventory for missing required power supplies
      */
     void updateMissingPSUs();

     /**
      * @brief Perform power supply configuration validation.
      * @details Validates if the existing power supply properties are a
      * supported configuration, and acts on its findings such as logging errors.
      */
     void validateConfig();

     /**
      * @brief Flag to indicate if the validateConfig() function should be run.
      * Set to false once the configuration has been validated to avoid running
      * multiple times due to interfaces added signal. Set to true during power
      * off to trigger the validation on power on.
      */
     bool runValidateConfig = true;

     /**
      * @brief Check that all PSUs have the same model name and that the system
      * has the required number of PSUs present as specified in the Supported
      * Configuration interface.
      *
      * @param[out] additionalData - Contains debug information on why the check
      *             might have failed. Can be used to fill in error logs.
      * @return true if all the required PSUs are present, false otherwise.
      */
     bool hasRequiredPSUs(std::map<std::string, std::string>& additionalData);

     /**
      * @brief Returns the number of PSUs that are required to be present.
      *
      * @return required number of PSUs, or 0 if the number could not be
      *         determined.
      */
     unsigned int getRequiredPSUCount();

     /**
      * @brief Returns whether the specified PSU is required to be present.
      *
      * @param[in] psu - Power supply to check
      * @return true if PSU is required, false otherwise.
      */
     bool isRequiredPSU(const PowerSupply& psu);

     /**
      * @brief Helper function to validate that all PSUs have the same model name
      *
      * @param[out] model - The model name. Empty if there is a mismatch.
      * @param[out] additionalData - If there is a mismatch, it contains debug
      *             information such as the mismatched model name.
      * @return true if all the PSUs have the same model name, false otherwise.
      */
     bool validateModelName(std::string& model,
                            std::map<std::string, std::string>& additionalData);

     /**
      * @brief Set the power-config-full-load GPIO depending on the EM full load
      *        property value.
      */
     void setPowerConfigGPIO();

     /**
      * @brief Indicate that the system is in a brownout condition by creating an
      * error log and setting the PowerSystemInputs status property to Fault.
      *
      * @param[in] additionalData - Contains debug information on the number of
      *            PSUs in fault state or not present.
      */
     void setBrownout(std::map<std::string, std::string>& additionalData);

     /**
      * @brief Indicate that the system is no longer in a brownout condition by
      * setting the PowerSystemInputs status property to Good.
      */
     void clearBrownout();

     /**
      * @brief Map of supported PSU configurations that include the model name
      * and their properties.
      */
     std::map<std::string, sys_properties> supportedConfigs;

     /**
      * @brief The vector for power supplies.
      */
     std::vector<std::unique_ptr<PowerSupply>> psus;

     /**
      * @brief The libgpiod object for setting the power supply config
      */
     std::unique_ptr<GPIOInterfaceBase> powerConfigGPIO = nullptr;

     /**
      * @brief PowerSystemInputs object
      */
     PowerSystemInputs powerSystemInputs;

     /**
      * @brief Implement the ObjectManager for PowerSystemInputs object.
      *
      * Implements the org.freedesktop.DBus.ObjectManager interface used to
      * communicate updates to the PowerSystemInputs object on the
      * /xyz/openbmc_project/power/power_supplies root D-Bus path.
      */
     sdbusplus::server::manager_t objectManager;

     /**
      * @brief Implement the ObjectManager for power supply input history.
      *
      * Implements the org.freedesktop.DBus.ObjectManager interface used to
      * communicate updates to the Average and Maximum interface properties on
      * the /org/open_power/sensors root D-Bus path.
      */
     sdbusplus::server::manager_t historyManager;

     /**
      * @brief GPIO to toggle to 'sync' power supply input history.
      */
     std::unique_ptr<GPIOInterfaceBase> syncHistoryGPIO = nullptr;

     /**
      * @brief Toggles the GPIO to sync power supply input history readings
      *
      * This GPIO is connected to all supplies.  This will clear the
      * previous readings out of the supplies and restart them both at the
      * same time zero and at record ID 0.  The supplies will return 0
      * bytes of data for the input history command right after this until
      * a new entry shows up.
      *
      * This will cause the code to delete all previous history data and
      * start fresh.
      */
     void syncHistory();
 };

 } // namespace phosphor::power::manager
	#pragma once

	#include "power_supply.hpp"
	#include "types.hpp"
	#include "utility.hpp"

	#include <phosphor-logging/log.hpp>
	#include <sdbusplus/bus/match.hpp>
	#include <sdbusplus/server/manager.hpp>
	#include <sdbusplus/server/object.hpp>
	#include <sdeventplus/event.hpp>
	#include <sdeventplus/utility/timer.hpp>
	#include <xyz/openbmc_project/State/Decorator/PowerSystemInputs/server.hpp>

	struct sys_properties
	{
	int powerSupplyCount;
	std::vector<uint64_t> inputVoltage;
	bool powerConfigFullLoad;
	};

	using namespace phosphor::power::psu;
	using namespace phosphor::logging;

	namespace phosphor::power::manager
	{

	using PowerSystemInputsInterface = sdbusplus::xyz::openbmc_project::State::
	Decorator::server::PowerSystemInputs;
	using PowerSystemInputsObject =
	sdbusplus::server::object_t<PowerSystemInputsInterface>;

	// Validation timeout. Allow 10s to detect if new EM interfaces show up in D-Bus
	// before performing the validation.
	constexpr auto validationTimeout = std::chrono::seconds(10);

	/**
	* @class PowerSystemInputs
	* @brief A concrete implementation for the PowerSystemInputs interface.
	*/
	class PowerSystemInputs : public PowerSystemInputsObject
	{
	public:
	PowerSystemInputs(sdbusplus::bus::bus& bus, const std::string& path) :
	PowerSystemInputsObject(bus, path.c_str())
	{}
	};

	/**
	* @class PSUManager
	*
	* This class will create an object used to manage and monitor a list of power
	* supply devices.
	*/
	class PSUManager
	{
	public:
	PSUManager() = delete;
	~PSUManager() = default;
	PSUManager(const PSUManager&) = delete;
	PSUManager& operator=(const PSUManager&) = delete;
	PSUManager(PSUManager&&) = delete;
	PSUManager& operator=(PSUManager&&) = delete;

	/**
	* Constructor to read configuration from D-Bus.
	*
	* @param[in] bus - D-Bus bus object
	* @param[in] e - event object
	*/
	PSUManager(sdbusplus::bus::bus& bus, const sdeventplus::Event& e);

	/**
	* Get PSU properties from D-Bus, use that to build a power supply
	* object.
	*
	* @param[in] properties - A map of property names and values
	*
	*/
	void getPSUProperties(util::DbusPropertyMap& properties);

	/**
	* Get PSU configuration from D-Bus
	*/
	void getPSUConfiguration();

	/**
	* @brief Initialize the system properties from the Supported Configuration
	* D-Bus object provided by Entity Manager.
	*/
	void getSystemProperties();

	/**
	* Initializes the manager.
	*
	* Get current BMC state, ...
	*/
	void initialize();

	/**
	* Starts the timer to start monitoring the list of devices.
	*/
	int run()
	{
	return timer->get_event().loop();
	}

	/**
	* Write PMBus ON_OFF_CONFIG
	*
	* This function will be called to cause the PMBus device driver to send the
	* ON_OFF_CONFIG command. Takes one byte of data.
	*/
	void onOffConfig(const uint8_t data)
	{
	for (auto& psu : psus)
	{
	psu->onOffConfig(data);
	}
	}

	/**
	* This function will be called in various situations in order to clear
	* any fault status bits that may have been set, in order to start over
	* with a clean state. Presence changes and power state changes will want
	* to clear any faults logged.
	*/
	void clearFaults()
	{
	setPowerSupplyError("");
	for (auto& psu : psus)
	{
	psu->clearFaults();
	}
	}

	private:
	/**
	* The D-Bus object
	*/
	sdbusplus::bus::bus& bus;

	/**
	* The timer that runs to periodically check the power supplies.
	*/
	std::unique_ptr<
	sdeventplus::utility::Timer<sdeventplus::ClockId::Monotonic>>
	timer;

	/**
	* The timer that performs power supply validation as the entity manager
	* interfaces show up in d-bus.
	*/
	std::unique_ptr<
	sdeventplus::utility::Timer<sdeventplus::ClockId::Monotonic>>
	validationTimer;

	/**
	* Let power control/sequencer application know of PSU error(s).
	*
	* @param[in] psuErrorString - string for power supply error
	*/
	void setPowerSupplyError(const std::string& psuErrorString);

	/**
	* Create an error
	*
	* @param[in] faultName - 'name' message for the BMC error log entry
	* @param[in,out] additionalData - The AdditionalData property for the error
	*/
	void createError(const std::string& faultName,
	std::map<std::string, std::string>& additionalData);

	/**
	* Analyze the status of each of the power supplies.
	*
	* Log errors for faults, when and where appropriate.
	*/
	void analyze();

	/** @brief True if the power is on. */
	bool powerOn = false;

	/** @brief True if power control is in the window between chassis pgood loss
	* and power off. */
	bool powerFaultOccurring = false;

	/** @brief True if an error for a brownout has already been logged. */
	bool brownoutLogged = false;

	/** @brief Used as part of subscribing to power on state changes*/
	std::string powerService;

	/** @brief Used to subscribe to D-Bus power on state changes */
	std::unique_ptr<sdbusplus::bus::match_t> powerOnMatch;

	/** @brief Used to subscribe to D-Bus power supply presence changes */
	std::vector<std::unique_ptr<sdbusplus::bus::match_t>> presenceMatches;

	/** @brief Used to subscribe to Entity Manager interfaces added */
	std::unique_ptr<sdbusplus::bus::match_t> entityManagerIfacesAddedMatch;

	/**
	* @brief Callback for power state property changes
	*
	* Process changes to the powered on state property for the system.
	*
	* @param[in] msg - Data associated with the power state signal
	*/
	void powerStateChanged(sdbusplus::message::message& msg);

	/**
	* @brief Callback for inventory property changes
	*
	* Process change of the Present property for power supply.
	*
	* @param[in] msg - Data associated with the Present change signal
	**/
	void presenceChanged(sdbusplus::message::message& msg);

	/**
	* @brief Callback for entity-manager interface added
	*
	* Process the information from the supported configuration and or IBM CFFPS
	* Connector interface being added.
	*
	* @param[in] msg - Data associated with the interfaces added signal
	*/
	void entityManagerIfaceAdded(sdbusplus::message::message& msg);

	/**
	* @brief Adds properties to the inventory.
	*
	* Reads the values from the devices and writes them to the associated
	* power supply D-Bus inventory objects.
	*
	* This needs to be done on startup, and each time the presence state
	* changes.
	*/
	void updateInventory()
	{
	for (auto& psu : psus)
	{
	psu->updateInventory();
	}
	}

	/**
	* @brief Helper function to populate the system properties
	*
	* @param[in] properties - A map of property names and values
	*/
	void populateSysProperties(const util::DbusPropertyMap& properties);

	/**
	* @brief Update inventory for missing required power supplies
	*/
	void updateMissingPSUs();

	/**
	* @brief Perform power supply configuration validation.
	* @details Validates if the existing power supply properties are a
	* supported configuration, and acts on its findings such as logging errors.
	*/
	void validateConfig();

	/**
	* @brief Flag to indicate if the validateConfig() function should be run.
	* Set to false once the configuration has been validated to avoid running
	* multiple times due to interfaces added signal. Set to true during power
	* off to trigger the validation on power on.
	*/
	bool runValidateConfig = true;

	/**
	* @brief Check that all PSUs have the same model name and that the system
	* has the required number of PSUs present as specified in the Supported
	* Configuration interface.
	*
	* @param[out] additionalData - Contains debug information on why the check
	* might have failed. Can be used to fill in error logs.
	* @return true if all the required PSUs are present, false otherwise.
	*/
	bool hasRequiredPSUs(std::map<std::string, std::string>& additionalData);

	/**
	* @brief Returns the number of PSUs that are required to be present.
	*
	* @return required number of PSUs, or 0 if the number could not be
	* determined.
	*/
	unsigned int getRequiredPSUCount();

	/**
	* @brief Returns whether the specified PSU is required to be present.
	*
	* @param[in] psu - Power supply to check
	* @return true if PSU is required, false otherwise.
	*/
	bool isRequiredPSU(const PowerSupply& psu);

	/**
	* @brief Helper function to validate that all PSUs have the same model name
	*
	* @param[out] model - The model name. Empty if there is a mismatch.
	* @param[out] additionalData - If there is a mismatch, it contains debug
	* information such as the mismatched model name.
	* @return true if all the PSUs have the same model name, false otherwise.
	*/
	bool validateModelName(std::string& model,
	std::map<std::string, std::string>& additionalData);

	/**
	* @brief Set the power-config-full-load GPIO depending on the EM full load
	* property value.
	*/
	void setPowerConfigGPIO();

	/**
	* @brief Indicate that the system is in a brownout condition by creating an
	* error log and setting the PowerSystemInputs status property to Fault.
	*
	* @param[in] additionalData - Contains debug information on the number of
	* PSUs in fault state or not present.
	*/
	void setBrownout(std::map<std::string, std::string>& additionalData);

	/**
	* @brief Indicate that the system is no longer in a brownout condition by
	* setting the PowerSystemInputs status property to Good.
	*/
	void clearBrownout();

	/**
	* @brief Map of supported PSU configurations that include the model name
	* and their properties.
	*/
	std::map<std::string, sys_properties> supportedConfigs;

	/**
	* @brief The vector for power supplies.
	*/
	std::vector<std::unique_ptr<PowerSupply>> psus;

	/**
	* @brief The libgpiod object for setting the power supply config
	*/
	std::unique_ptr<GPIOInterfaceBase> powerConfigGPIO = nullptr;

	/**
	* @brief PowerSystemInputs object
	*/
	PowerSystemInputs powerSystemInputs;

	/**
	* @brief Implement the ObjectManager for PowerSystemInputs object.
	*
	* Implements the org.freedesktop.DBus.ObjectManager interface used to
	* communicate updates to the PowerSystemInputs object on the
	* /xyz/openbmc_project/power/power_supplies root D-Bus path.
	*/
	sdbusplus::server::manager_t objectManager;

	/**
	* @brief Implement the ObjectManager for power supply input history.
	*
	* Implements the org.freedesktop.DBus.ObjectManager interface used to
	* communicate updates to the Average and Maximum interface properties on
	* the /org/open_power/sensors root D-Bus path.
	*/
	sdbusplus::server::manager_t historyManager;

	/**
	* @brief GPIO to toggle to 'sync' power supply input history.
	*/
	std::unique_ptr<GPIOInterfaceBase> syncHistoryGPIO = nullptr;

	/**
	* @brief Toggles the GPIO to sync power supply input history readings
	*
	* This GPIO is connected to all supplies. This will clear the
	* previous readings out of the supplies and restart them both at the
	* same time zero and at record ID 0. The supplies will return 0
	* bytes of data for the input history command right after this until
	* a new entry shows up.
	*
	* This will cause the code to delete all previous history data and
	* start fresh.
	*/
	void syncHistory();
	};

	} // namespace phosphor::power::manager