blob: 470182602f0a8f222ceddaa01df764aff323d7a3 [file] [log] [blame]
#pragma once
#include "device.hpp"
#include "gpio.hpp"
#include "pmbus.hpp"
#include "types.hpp"
#include <sdbusplus/bus.hpp>
#include <algorithm>
#include <filesystem>
#include <map>
#include <vector>
namespace phosphor
{
namespace power
{
// Error type, callout
using PartCallout = std::tuple<ucd90160::extraAnalysisType, std::string>;
/**
* @class UCD90160
*
* This class implements fault analysis for the UCD90160
* power sequencer device.
*
*/
class UCD90160 : public Device
{
public:
UCD90160() = delete;
~UCD90160() = default;
UCD90160(const UCD90160&) = delete;
UCD90160& operator=(const UCD90160&) = delete;
UCD90160(UCD90160&&) = default;
UCD90160& operator=(UCD90160&&) = default;
/**
* Constructor
*
* @param[in] instance - the device instance number
* @param[in] bus - D-Bus bus object
*/
UCD90160(size_t instance, sdbusplus::bus_t& bus);
/**
* Analyzes the device for errors when the device is
* known to be in an error state. A log will be created.
*/
void onFailure() override;
/**
* Checks the device for errors and only creates a log
* if one is found.
*/
void analyze() override;
/**
* Clears faults in the device
*/
void clearFaults() override
{}
private:
/**
* Reports an error for a GPU PGOOD failure
*
* @param[in] callout - the GPU callout string
*/
void gpuPGOODError(const std::string& callout);
/**
* Reports an error for a GPU OverTemp failure
*
* @param[in] callout - the GPU callout string
*/
void gpuOverTempError(const std::string& callout);
/**
* Reports an error for a MEM_GOODx failure.
*
* @param[in] callout - The MEM callout string
*/
void memGoodError(const std::string& callout);
/**
* Given the device path for a chip, find its gpiochip
* path
*
* @param[in] path - device path, like
* /sys/devices/.../i2c-11/11-0064
*
* @return fs::path - The gpiochip path, like
* /dev/gpiochip1
*/
static std::filesystem::path
findGPIODevice(const std::filesystem::path& path);
/**
* Checks for VOUT faults on the device.
*
* This device can monitor voltages of its dependent
* devices, and VOUT faults are voltage faults
* on these devices.
*
* @return bool - true if an error log was created
*/
bool checkVOUTFaults();
/**
* Checks for PGOOD faults on the device.
*
* This device can monitor the PGOOD signals of its dependent
* devices, and this check will look for faults of
* those PGOODs.
*
* @param[in] polling - If this is running while polling for errors,
* as opposing to analyzing a fail condition.
*
* @return bool - true if an error log was created
*/
bool checkPGOODFaults(bool polling);
/**
* Creates an error log when the device has an error
* but it isn't a PGOOD or voltage failure.
*/
void createPowerFaultLog();
/**
* Reads the status_word register
*
* @return uint16_t - the register contents
*/
uint16_t readStatusWord();
/**
* Reads the mfr_status register
*
* @return uint32_t - the register contents
*/
uint32_t readMFRStatus();
/**
* Does any additional fault analysis based on the
* value of the extraAnalysisType field in the GPIOConfig
* entry.
*
* Used to get better callouts.
*
* @param[in] config - the GPIOConfig entry to use
*
* @return bool - true if a HW error was found, false else
*/
bool doExtraAnalysis(const ucd90160::GPIConfig& config);
/**
* Does additional fault analysis using GPIOs to
* specifically identify the failing part.
*
* Used when there are too many PGOOD inputs for
* the UCD90160 to handle, so just a summary bit
* is wired into the chip, and then the specific
* fault GPIOs are off of a different GPIO device,
* like an IO expander.
*
* @param[in] type - the type of analysis to do
*
* @return bool - true if a HW error was found, false else
*/
bool doGPIOAnalysis(ucd90160::extraAnalysisType type);
/**
* Says if we've already logged a Vout fault
*
* The policy is only 1 of the same error will
* be logged for the duration of a class instance.
*
* @param[in] page - the page to check
*
* @return bool - if we've already logged a fault against
* this page
*/
inline bool isVoutFaultLogged(uint32_t page) const
{
return std::find(voutErrors.begin(), voutErrors.end(), page) !=
voutErrors.end();
}
/**
* Saves that a Vout fault has been logged
*
* @param[in] page - the page the error was logged against
*/
inline void setVoutFaultLogged(uint32_t page)
{
voutErrors.push_back(page);
}
/**
* Says if we've already logged a PGOOD fault
*
* The policy is only 1 of the same errors will
* be logged for the duration of a class instance.
*
* @param[in] input - the input to check
*
* @return bool - if we've already logged a fault against
* this input
*/
inline bool isPGOODFaultLogged(uint32_t input) const
{
return std::find(pgoodErrors.begin(), pgoodErrors.end(), input) !=
pgoodErrors.end();
}
/**
* Says if we've already logged a specific fault
* against a specific part
*
* @param[in] callout - error type and name tuple
*
* @return bool - if we've already logged this fault
* against this part
*/
inline bool isPartCalledOut(const PartCallout& callout) const
{
return std::find(callouts.begin(), callouts.end(), callout) !=
callouts.end();
}
/**
* Saves that a PGOOD fault has been logged
*
* @param[in] input - the input the error was logged against
*/
inline void setPGOODFaultLogged(uint32_t input)
{
pgoodErrors.push_back(input);
}
/**
* Saves that a specific fault on a specific part has been done
*
* @param[in] callout - error type and name tuple
*/
inline void setPartCallout(const PartCallout& callout)
{
callouts.push_back(callout);
}
/**
* List of pages that Vout errors have
* already been logged against
*/
std::vector<uint32_t> voutErrors;
/**
* List of inputs that PGOOD errors have
* already been logged against
*/
std::vector<uint32_t> pgoodErrors;
/**
* List of callouts that already been done
*/
std::vector<PartCallout> callouts;
/**
* The read/write interface to this hardware
*/
pmbus::PMBus interface;
/**
* A map of GPI pin IDs to the GPIO object
* used to access them
*/
std::map<size_t, std::unique_ptr<gpio::GPIO>> gpios;
/**
* Keeps track of device access errors to avoid repeatedly
* logging errors for bad hardware
*/
bool accessError = false;
/**
* Keeps track of GPIO access errors when doing the in depth
* PGOOD fault analysis to avoid repeatedly logging errors
* for bad hardware
*/
bool gpioAccessError = false;
/**
* The path to the GPIO device used to read
* the GPI (PGOOD) status
*/
std::filesystem::path gpioDevice;
/**
* The D-Bus bus object
*/
sdbusplus::bus_t& bus;
/**
* Map of device instance to the instance specific data
*/
static const ucd90160::DeviceMap deviceMap;
};
} // namespace power
} // namespace phosphor