phosphor-power-sequencer/test/ucd90160_device_tests.cpp - openbmc/phosphor-power - Gitiles

 /**
  * Copyright © 2024 IBM Corporation
  *
  * Licensed under the Apache License, Version 2.0 (the "License");
  * you may not use this file except in compliance with the License.
  * You may obtain a copy of the License at
  *
  *     http://www.apache.org/licenses/LICENSE-2.0
  *
  * Unless required by applicable law or agreed to in writing, software
  * distributed under the License is distributed on an "AS IS" BASIS,
  * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  * See the License for the specific language governing permissions and
  * limitations under the License.
  */

 #include "mock_pmbus.hpp"
 #include "mock_services.hpp"
 #include "pmbus.hpp"
 #include "rail.hpp"
 #include "services.hpp"
 #include "ucd90160_device.hpp"

 #include <cstdint>
 #include <map>
 #include <memory>
 #include <optional>
 #include <string>
 #include <utility>
 #include <vector>

 #include <gmock/gmock.h>
 #include <gtest/gtest.h>

 using namespace phosphor::power::sequencer;
 using namespace phosphor::pmbus;

 using ::testing::Return;

 /**
  * Creates a Rail object that checks for a pgood fault using a GPIO.
  *
  * @param name Unique name for the rail
  * @param gpio GPIO line to read to determine the pgood status of the rail
  * @return Rail object
  */
 static std::unique_ptr<Rail> createRail(const std::string& name,
                                         unsigned int gpioLine)
 {
     std::optional<std::string> presence{};
     std::optional<uint8_t> page{};
     bool isPowerSupplyRail{false};
     bool checkStatusVout{false};
     bool compareVoltageToLimit{false};
     bool activeLow{false};
     std::optional<GPIO> gpio{GPIO{gpioLine, activeLow}};
     return std::make_unique<Rail>(name, presence, page, isPowerSupplyRail,
                                   checkStatusVout, compareVoltageToLimit, gpio);
 }

 TEST(UCD90160DeviceTests, Constructor)
 {
     MockServices services;

     std::vector<std::unique_ptr<Rail>> rails;
     rails.emplace_back(createRail("VDD", 5));
     rails.emplace_back(createRail("VIO", 7));
     uint8_t bus{3};
     uint16_t address{0x72};
     UCD90160Device device{std::move(rails), services, bus, address};

     EXPECT_EQ(device.getName(), "UCD90160");
     EXPECT_EQ(device.getRails().size(), 2);
     EXPECT_EQ(device.getRails()[0]->getName(), "VDD");
     EXPECT_EQ(device.getRails()[1]->getName(), "VIO");
     EXPECT_EQ(device.getBus(), bus);
     EXPECT_EQ(device.getAddress(), address);
     EXPECT_EQ(device.getDriverName(), "ucd9000");
     EXPECT_EQ(device.getInstance(), 0);
     EXPECT_NE(&(device.getPMBusInterface()), nullptr);
 }

 TEST(UCD90160DeviceTests, StoreGPIOValues)
 {
     // This is a protected method and cannot be called directly from a gtest.
     // Call findPgoodFault() which calls storeGPIOValues().

     // Test where works
     {
         std::vector<int> gpioValues{
             1, 0, 0, 1, // group 1 in journal
             1, 1, 0, 0, // group 2 in journal
             1, 0, 1, 1, // group 3 in journal
             0, 0, 1, 1, // group 4 in journal
             1, 0, 0, 0, // group 5 in journal
             1, 0, 0, 1, // group 6 in journal
             1, 1        // group 7 in journal
         };

         MockServices services;
         EXPECT_CALL(services, getGPIOValues("ucd90160"))
             .Times(1)
             .WillOnce(Return(gpioValues));
         EXPECT_CALL(services, logInfoMsg("Device UCD90160 GPIO values:"))
             .Times(1);
         EXPECT_CALL(
             services,
             logInfoMsg("[FPWM1_GPIO5, FPWM2_GPIO6, FPWM3_GPIO7, FPWM4_GPIO8]: "
                        "[1, 0, 0, 1]"))
             .Times(1);
         EXPECT_CALL(
             services,
             logInfoMsg(
                 "[FPWM5_GPIO9, FPWM6_GPIO10, FPWM7_GPIO11, FPWM8_GPIO12]: "
                 "[1, 1, 0, 0]"))
             .Times(1);
         EXPECT_CALL(services,
                     logInfoMsg("[GPI1_PWM1, GPI2_PWM2, GPI3_PWM3, GPI4_PWM4]: "
                                "[1, 0, 1, 1]"))
             .Times(1);
         EXPECT_CALL(services,
                     logInfoMsg("[GPIO14, GPIO15, TDO_GPIO20, TCK_GPIO19]: "
                                "[0, 0, 1, 1]"))
             .Times(1);
         EXPECT_CALL(services,
                     logInfoMsg("[TMS_GPIO22, TDI_GPIO21, GPIO1, GPIO2]: "
                                "[1, 0, 0, 0]"))
             .Times(1);
         EXPECT_CALL(services, logInfoMsg("[GPIO3, GPIO4, GPIO13, GPIO16]: "
                                          "[1, 0, 0, 1]"))
             .Times(1);
         EXPECT_CALL(services, logInfoMsg("[GPIO17, GPIO18]: "
                                          "[1, 1]"))
             .Times(1);
         EXPECT_CALL(services,
                     logInfoMsg("Device UCD90160 MFR_STATUS: 0x123456789abc"))
             .Times(1);
         EXPECT_CALL(
             services,
             logErrorMsg(
                 "Pgood fault found in rail monitored by device UCD90160"))
             .Times(1);
         EXPECT_CALL(services, logErrorMsg("Pgood fault detected in rail VDD"))
             .Times(1);
         EXPECT_CALL(
             services,
             logErrorMsg(
                 "Rail VDD pgood GPIO line offset 2 has inactive value 0"))
             .Times(1);

         std::vector<std::unique_ptr<Rail>> rails;
         rails.emplace_back(createRail("VDD", 2));
         uint8_t bus{3};
         uint16_t address{0x72};
         UCD90160Device device{std::move(rails), services, bus, address};

         MockPMBus& pmbus = static_cast<MockPMBus&>(device.getPMBusInterface());
         EXPECT_CALL(pmbus, getPath(Type::Hwmon))
             .Times(1)
             .WillOnce(Return("/tmp"));
         EXPECT_CALL(pmbus, read("mfr_status", Type::HwmonDeviceDebug, true))
             .Times(1)
             .WillOnce(Return(0x123456789abcull));

         // Call findPgoodFault() which calls storeGPIOValues()
         std::string powerSupplyError{};
         std::map<std::string, std::string> additionalData{};
         std::string error = device.findPgoodFault(services, powerSupplyError,
                                                   additionalData);
         EXPECT_EQ(error,
                   "xyz.openbmc_project.Power.Error.PowerSequencerVoltageFault");
         EXPECT_EQ(additionalData.size(), 31);
         EXPECT_EQ(additionalData["MFR_STATUS"], "0x123456789abc");
         EXPECT_EQ(additionalData["DEVICE_NAME"], "UCD90160");
         EXPECT_EQ(additionalData["FPWM1_GPIO5"], "1");
         EXPECT_EQ(additionalData["FPWM2_GPIO6"], "0");
         EXPECT_EQ(additionalData["FPWM3_GPIO7"], "0");
         EXPECT_EQ(additionalData["FPWM4_GPIO8"], "1");
         EXPECT_EQ(additionalData["FPWM5_GPIO9"], "1");
         EXPECT_EQ(additionalData["FPWM6_GPIO10"], "1");
         EXPECT_EQ(additionalData["FPWM7_GPIO11"], "0");
         EXPECT_EQ(additionalData["FPWM8_GPIO12"], "0");
         EXPECT_EQ(additionalData["GPI1_PWM1"], "1");
         EXPECT_EQ(additionalData["GPI2_PWM2"], "0");
         EXPECT_EQ(additionalData["GPI3_PWM3"], "1");
         EXPECT_EQ(additionalData["GPI4_PWM4"], "1");
         EXPECT_EQ(additionalData["GPIO14"], "0");
         EXPECT_EQ(additionalData["GPIO15"], "0");
         EXPECT_EQ(additionalData["TDO_GPIO20"], "1");
         EXPECT_EQ(additionalData["TCK_GPIO19"], "1");
         EXPECT_EQ(additionalData["TMS_GPIO22"], "1");
         EXPECT_EQ(additionalData["TDI_GPIO21"], "0");
         EXPECT_EQ(additionalData["GPIO1"], "0");
         EXPECT_EQ(additionalData["GPIO2"], "0");
         EXPECT_EQ(additionalData["GPIO3"], "1");
         EXPECT_EQ(additionalData["GPIO4"], "0");
         EXPECT_EQ(additionalData["GPIO13"], "0");
         EXPECT_EQ(additionalData["GPIO16"], "1");
         EXPECT_EQ(additionalData["GPIO17"], "1");
         EXPECT_EQ(additionalData["GPIO18"], "1");
         EXPECT_EQ(additionalData["RAIL_NAME"], "VDD");
         EXPECT_EQ(additionalData["GPIO_LINE"], "2");
         EXPECT_EQ(additionalData["GPIO_VALUE"], "0");
     }

     // Test where there are the wrong number of GPIOs (27 instead of 26)
     {
         std::vector<int> gpioValues{
             1, 0, 0, 1, // group 1 in journal
             1, 1, 0, 0, // group 2 in journal
             1, 0, 1, 1, // group 3 in journal
             0, 0, 1, 1, // group 4 in journal
             1, 0, 0, 0, // group 5 in journal
             1, 0, 0, 1, // group 6 in journal
             1, 1, 0     // group 7 in journal + extra value
         };

         MockServices services;
         EXPECT_CALL(services, getGPIOValues("ucd90160"))
             .Times(1)
             .WillOnce(Return(gpioValues));
         EXPECT_CALL(services, logInfoMsg("Device UCD90160 GPIO values: ["
                                          "1, 0, 0, 1, "
                                          "1, 1, 0, 0, "
                                          "1, 0, 1, 1, "
                                          "0, 0, 1, 1, "
                                          "1, 0, 0, 0, "
                                          "1, 0, 0, 1, "
                                          "1, 1, 0]"))
             .Times(1);
         EXPECT_CALL(services,
                     logInfoMsg("Device UCD90160 MFR_STATUS: 0x123456789abc"))
             .Times(1);
         EXPECT_CALL(
             services,
             logErrorMsg(
                 "Pgood fault found in rail monitored by device UCD90160"))
             .Times(1);
         EXPECT_CALL(services, logErrorMsg("Pgood fault detected in rail VDD"))
             .Times(1);
         EXPECT_CALL(
             services,
             logErrorMsg(
                 "Rail VDD pgood GPIO line offset 2 has inactive value 0"))
             .Times(1);

         std::vector<std::unique_ptr<Rail>> rails;
         rails.emplace_back(createRail("VDD", 2));
         uint8_t bus{3};
         uint16_t address{0x72};
         UCD90160Device device{std::move(rails), services, bus, address};

         MockPMBus& pmbus = static_cast<MockPMBus&>(device.getPMBusInterface());
         EXPECT_CALL(pmbus, getPath(Type::Hwmon))
             .Times(1)
             .WillOnce(Return("/tmp"));
         EXPECT_CALL(pmbus, read("mfr_status", Type::HwmonDeviceDebug, true))
             .Times(1)
             .WillOnce(Return(0x123456789abcull));

         // Call findPgoodFault() which calls storeGPIOValues()
         std::string powerSupplyError{};
         std::map<std::string, std::string> additionalData{};
         std::string error = device.findPgoodFault(services, powerSupplyError,
                                                   additionalData);
         EXPECT_EQ(error,
                   "xyz.openbmc_project.Power.Error.PowerSequencerVoltageFault");
         EXPECT_EQ(additionalData.size(), 6);
         EXPECT_EQ(additionalData["MFR_STATUS"], "0x123456789abc");
         EXPECT_EQ(additionalData["DEVICE_NAME"], "UCD90160");
         EXPECT_EQ(additionalData["GPIO_VALUES"], "[1, 0, 0, 1, "
                                                  "1, 1, 0, 0, "
                                                  "1, 0, 1, 1, "
                                                  "0, 0, 1, 1, "
                                                  "1, 0, 0, 0, "
                                                  "1, 0, 0, 1, "
                                                  "1, 1, 0]");
         EXPECT_EQ(additionalData["RAIL_NAME"], "VDD");
         EXPECT_EQ(additionalData["GPIO_LINE"], "2");
         EXPECT_EQ(additionalData["GPIO_VALUE"], "0");
     }
 }
	/**
	* Copyright © 2024 IBM Corporation
	*
	* Licensed under the Apache License, Version 2.0 (the "License");
	* you may not use this file except in compliance with the License.
	* You may obtain a copy of the License at
	*
	* http://www.apache.org/licenses/LICENSE-2.0
	*
	* Unless required by applicable law or agreed to in writing, software
	* distributed under the License is distributed on an "AS IS" BASIS,
	* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
	* See the License for the specific language governing permissions and
	* limitations under the License.
	*/

	#include "mock_pmbus.hpp"
	#include "mock_services.hpp"
	#include "pmbus.hpp"
	#include "rail.hpp"
	#include "services.hpp"
	#include "ucd90160_device.hpp"

	#include <cstdint>
	#include <map>
	#include <memory>
	#include <optional>
	#include <string>
	#include <utility>
	#include <vector>

	#include <gmock/gmock.h>
	#include <gtest/gtest.h>

	using namespace phosphor::power::sequencer;
	using namespace phosphor::pmbus;

	using ::testing::Return;

	/**
	* Creates a Rail object that checks for a pgood fault using a GPIO.
	*
	* @param name Unique name for the rail
	* @param gpio GPIO line to read to determine the pgood status of the rail
	* @return Rail object
	*/
	static std::unique_ptr<Rail> createRail(const std::string& name,
	unsigned int gpioLine)
	{
	std::optional<std::string> presence{};
	std::optional<uint8_t> page{};
	bool isPowerSupplyRail{false};
	bool checkStatusVout{false};
	bool compareVoltageToLimit{false};
	bool activeLow{false};
	std::optional<GPIO> gpio{GPIO{gpioLine, activeLow}};
	return std::make_unique<Rail>(name, presence, page, isPowerSupplyRail,
	checkStatusVout, compareVoltageToLimit, gpio);
	}

	TEST(UCD90160DeviceTests, Constructor)
	{
	MockServices services;

	std::vector<std::unique_ptr<Rail>> rails;
	rails.emplace_back(createRail("VDD", 5));
	rails.emplace_back(createRail("VIO", 7));
	uint8_t bus{3};
	uint16_t address{0x72};
	UCD90160Device device{std::move(rails), services, bus, address};

	EXPECT_EQ(device.getName(), "UCD90160");
	EXPECT_EQ(device.getRails().size(), 2);
	EXPECT_EQ(device.getRails()[0]->getName(), "VDD");
	EXPECT_EQ(device.getRails()[1]->getName(), "VIO");
	EXPECT_EQ(device.getBus(), bus);
	EXPECT_EQ(device.getAddress(), address);
	EXPECT_EQ(device.getDriverName(), "ucd9000");
	EXPECT_EQ(device.getInstance(), 0);
	EXPECT_NE(&(device.getPMBusInterface()), nullptr);
	}

	TEST(UCD90160DeviceTests, StoreGPIOValues)
	{
	// This is a protected method and cannot be called directly from a gtest.
	// Call findPgoodFault() which calls storeGPIOValues().

	// Test where works
	{
	std::vector<int> gpioValues{
	1, 0, 0, 1, // group 1 in journal
	1, 1, 0, 0, // group 2 in journal
	1, 0, 1, 1, // group 3 in journal
	0, 0, 1, 1, // group 4 in journal
	1, 0, 0, 0, // group 5 in journal
	1, 0, 0, 1, // group 6 in journal
	1, 1 // group 7 in journal
	};

	MockServices services;
	EXPECT_CALL(services, getGPIOValues("ucd90160"))
	.Times(1)
	.WillOnce(Return(gpioValues));
	EXPECT_CALL(services, logInfoMsg("Device UCD90160 GPIO values:"))
	.Times(1);
	EXPECT_CALL(
	services,
	logInfoMsg("[FPWM1_GPIO5, FPWM2_GPIO6, FPWM3_GPIO7, FPWM4_GPIO8]: "
	"[1, 0, 0, 1]"))
	.Times(1);
	EXPECT_CALL(
	services,
	logInfoMsg(
	"[FPWM5_GPIO9, FPWM6_GPIO10, FPWM7_GPIO11, FPWM8_GPIO12]: "
	"[1, 1, 0, 0]"))
	.Times(1);
	EXPECT_CALL(services,
	logInfoMsg("[GPI1_PWM1, GPI2_PWM2, GPI3_PWM3, GPI4_PWM4]: "
	"[1, 0, 1, 1]"))
	.Times(1);
	EXPECT_CALL(services,
	logInfoMsg("[GPIO14, GPIO15, TDO_GPIO20, TCK_GPIO19]: "
	"[0, 0, 1, 1]"))
	.Times(1);
	EXPECT_CALL(services,
	logInfoMsg("[TMS_GPIO22, TDI_GPIO21, GPIO1, GPIO2]: "
	"[1, 0, 0, 0]"))
	.Times(1);
	EXPECT_CALL(services, logInfoMsg("[GPIO3, GPIO4, GPIO13, GPIO16]: "
	"[1, 0, 0, 1]"))
	.Times(1);
	EXPECT_CALL(services, logInfoMsg("[GPIO17, GPIO18]: "
	"[1, 1]"))
	.Times(1);
	EXPECT_CALL(services,
	logInfoMsg("Device UCD90160 MFR_STATUS: 0x123456789abc"))
	.Times(1);
	EXPECT_CALL(
	services,
	logErrorMsg(
	"Pgood fault found in rail monitored by device UCD90160"))
	.Times(1);
	EXPECT_CALL(services, logErrorMsg("Pgood fault detected in rail VDD"))
	.Times(1);
	EXPECT_CALL(
	services,
	logErrorMsg(
	"Rail VDD pgood GPIO line offset 2 has inactive value 0"))
	.Times(1);

	std::vector<std::unique_ptr<Rail>> rails;
	rails.emplace_back(createRail("VDD", 2));
	uint8_t bus{3};
	uint16_t address{0x72};
	UCD90160Device device{std::move(rails), services, bus, address};

	MockPMBus& pmbus = static_cast<MockPMBus&>(device.getPMBusInterface());
	EXPECT_CALL(pmbus, getPath(Type::Hwmon))
	.Times(1)
	.WillOnce(Return("/tmp"));
	EXPECT_CALL(pmbus, read("mfr_status", Type::HwmonDeviceDebug, true))
	.Times(1)
	.WillOnce(Return(0x123456789abcull));

	// Call findPgoodFault() which calls storeGPIOValues()
	std::string powerSupplyError{};
	std::map<std::string, std::string> additionalData{};
	std::string error = device.findPgoodFault(services, powerSupplyError,
	additionalData);
	EXPECT_EQ(error,
	"xyz.openbmc_project.Power.Error.PowerSequencerVoltageFault");
	EXPECT_EQ(additionalData.size(), 31);
	EXPECT_EQ(additionalData["MFR_STATUS"], "0x123456789abc");
	EXPECT_EQ(additionalData["DEVICE_NAME"], "UCD90160");
	EXPECT_EQ(additionalData["FPWM1_GPIO5"], "1");
	EXPECT_EQ(additionalData["FPWM2_GPIO6"], "0");
	EXPECT_EQ(additionalData["FPWM3_GPIO7"], "0");
	EXPECT_EQ(additionalData["FPWM4_GPIO8"], "1");
	EXPECT_EQ(additionalData["FPWM5_GPIO9"], "1");
	EXPECT_EQ(additionalData["FPWM6_GPIO10"], "1");
	EXPECT_EQ(additionalData["FPWM7_GPIO11"], "0");
	EXPECT_EQ(additionalData["FPWM8_GPIO12"], "0");
	EXPECT_EQ(additionalData["GPI1_PWM1"], "1");
	EXPECT_EQ(additionalData["GPI2_PWM2"], "0");
	EXPECT_EQ(additionalData["GPI3_PWM3"], "1");
	EXPECT_EQ(additionalData["GPI4_PWM4"], "1");
	EXPECT_EQ(additionalData["GPIO14"], "0");
	EXPECT_EQ(additionalData["GPIO15"], "0");
	EXPECT_EQ(additionalData["TDO_GPIO20"], "1");
	EXPECT_EQ(additionalData["TCK_GPIO19"], "1");
	EXPECT_EQ(additionalData["TMS_GPIO22"], "1");
	EXPECT_EQ(additionalData["TDI_GPIO21"], "0");
	EXPECT_EQ(additionalData["GPIO1"], "0");
	EXPECT_EQ(additionalData["GPIO2"], "0");
	EXPECT_EQ(additionalData["GPIO3"], "1");
	EXPECT_EQ(additionalData["GPIO4"], "0");
	EXPECT_EQ(additionalData["GPIO13"], "0");
	EXPECT_EQ(additionalData["GPIO16"], "1");
	EXPECT_EQ(additionalData["GPIO17"], "1");
	EXPECT_EQ(additionalData["GPIO18"], "1");
	EXPECT_EQ(additionalData["RAIL_NAME"], "VDD");
	EXPECT_EQ(additionalData["GPIO_LINE"], "2");
	EXPECT_EQ(additionalData["GPIO_VALUE"], "0");
	}

	// Test where there are the wrong number of GPIOs (27 instead of 26)
	{
	std::vector<int> gpioValues{
	1, 0, 0, 1, // group 1 in journal
	1, 1, 0, 0, // group 2 in journal
	1, 0, 1, 1, // group 3 in journal
	0, 0, 1, 1, // group 4 in journal
	1, 0, 0, 0, // group 5 in journal
	1, 0, 0, 1, // group 6 in journal
	1, 1, 0 // group 7 in journal + extra value
	};

	MockServices services;
	EXPECT_CALL(services, getGPIOValues("ucd90160"))
	.Times(1)
	.WillOnce(Return(gpioValues));
	EXPECT_CALL(services, logInfoMsg("Device UCD90160 GPIO values: ["
	"1, 0, 0, 1, "
	"1, 1, 0, 0, "
	"1, 0, 1, 1, "
	"0, 0, 1, 1, "
	"1, 0, 0, 0, "
	"1, 0, 0, 1, "
	"1, 1, 0]"))
	.Times(1);
	EXPECT_CALL(services,
	logInfoMsg("Device UCD90160 MFR_STATUS: 0x123456789abc"))
	.Times(1);
	EXPECT_CALL(
	services,
	logErrorMsg(
	"Pgood fault found in rail monitored by device UCD90160"))
	.Times(1);
	EXPECT_CALL(services, logErrorMsg("Pgood fault detected in rail VDD"))
	.Times(1);
	EXPECT_CALL(
	services,
	logErrorMsg(
	"Rail VDD pgood GPIO line offset 2 has inactive value 0"))
	.Times(1);

	std::vector<std::unique_ptr<Rail>> rails;
	rails.emplace_back(createRail("VDD", 2));
	uint8_t bus{3};
	uint16_t address{0x72};
	UCD90160Device device{std::move(rails), services, bus, address};

	MockPMBus& pmbus = static_cast<MockPMBus&>(device.getPMBusInterface());
	EXPECT_CALL(pmbus, getPath(Type::Hwmon))
	.Times(1)
	.WillOnce(Return("/tmp"));
	EXPECT_CALL(pmbus, read("mfr_status", Type::HwmonDeviceDebug, true))
	.Times(1)
	.WillOnce(Return(0x123456789abcull));

	// Call findPgoodFault() which calls storeGPIOValues()
	std::string powerSupplyError{};
	std::map<std::string, std::string> additionalData{};
	std::string error = device.findPgoodFault(services, powerSupplyError,
	additionalData);
	EXPECT_EQ(error,
	"xyz.openbmc_project.Power.Error.PowerSequencerVoltageFault");
	EXPECT_EQ(additionalData.size(), 6);
	EXPECT_EQ(additionalData["MFR_STATUS"], "0x123456789abc");
	EXPECT_EQ(additionalData["DEVICE_NAME"], "UCD90160");
	EXPECT_EQ(additionalData["GPIO_VALUES"], "[1, 0, 0, 1, "
	"1, 1, 0, 0, "
	"1, 0, 1, 1, "
	"0, 0, 1, 1, "
	"1, 0, 0, 0, "
	"1, 0, 0, 1, "
	"1, 1, 0]");
	EXPECT_EQ(additionalData["RAIL_NAME"], "VDD");
	EXPECT_EQ(additionalData["GPIO_LINE"], "2");
	EXPECT_EQ(additionalData["GPIO_VALUE"], "0");
	}
	}