Shawn McCarney | 0e8c68a | 2020-03-27 01:44:48 -0500 | [diff] [blame] | 1 | /** |
| 2 | * Copyright © 2020 IBM Corporation |
| 3 | * |
| 4 | * Licensed under the Apache License, Version 2.0 (the "License"); |
| 5 | * you may not use this file except in compliance with the License. |
| 6 | * You may obtain a copy of the License at |
| 7 | * |
| 8 | * http://www.apache.org/licenses/LICENSE-2.0 |
| 9 | * |
| 10 | * Unless required by applicable law or agreed to in writing, software |
| 11 | * distributed under the License is distributed on an "AS IS" BASIS, |
| 12 | * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| 13 | * See the License for the specific language governing permissions and |
| 14 | * limitations under the License. |
| 15 | */ |
| 16 | #include "action.hpp" |
Bob King | 3a78754 | 2020-04-14 13:45:01 +0800 | [diff] [blame] | 17 | #include "and_action.hpp" |
Shawn McCarney | 0e8c68a | 2020-03-27 01:44:48 -0500 | [diff] [blame] | 18 | #include "chassis.hpp" |
Bob King | b267b7e | 2020-04-22 14:42:39 +0800 | [diff] [blame] | 19 | #include "compare_presence_action.hpp" |
Bob King | f213432 | 2020-04-27 14:14:56 +0800 | [diff] [blame] | 20 | #include "compare_vpd_action.hpp" |
Shawn McCarney | 0e8c68a | 2020-03-27 01:44:48 -0500 | [diff] [blame] | 21 | #include "config_file_parser.hpp" |
| 22 | #include "config_file_parser_error.hpp" |
Bob King | 9c36c5f | 2020-04-06 11:34:09 +0800 | [diff] [blame] | 23 | #include "configuration.hpp" |
Bob King | 0e70113 | 2020-04-03 21:50:31 +0800 | [diff] [blame] | 24 | #include "device.hpp" |
Bob King | f09bfe0 | 2020-04-13 17:21:15 +0800 | [diff] [blame] | 25 | #include "i2c_compare_bit_action.hpp" |
| 26 | #include "i2c_compare_byte_action.hpp" |
| 27 | #include "i2c_compare_bytes_action.hpp" |
Bob King | f617f89 | 2020-03-30 19:03:35 +0800 | [diff] [blame] | 28 | #include "i2c_interface.hpp" |
| 29 | #include "i2c_write_bit_action.hpp" |
Bob King | 87ff9d7 | 2020-03-31 14:02:55 +0800 | [diff] [blame] | 30 | #include "i2c_write_byte_action.hpp" |
Bob King | bafcb86 | 2020-03-31 16:39:00 +0800 | [diff] [blame] | 31 | #include "i2c_write_bytes_action.hpp" |
Bob King | f1b58dc | 2020-04-14 14:53:10 +0800 | [diff] [blame] | 32 | #include "not_action.hpp" |
Bob King | 0b51a9b | 2020-04-15 13:24:18 +0800 | [diff] [blame] | 33 | #include "or_action.hpp" |
Bob King | 8461488 | 2020-04-30 13:13:48 +0800 | [diff] [blame] | 34 | #include "pmbus_read_sensor_action.hpp" |
Shawn McCarney | 0e8c68a | 2020-03-27 01:44:48 -0500 | [diff] [blame] | 35 | #include "pmbus_utils.hpp" |
| 36 | #include "pmbus_write_vout_command_action.hpp" |
Bob King | 9c36c5f | 2020-04-06 11:34:09 +0800 | [diff] [blame] | 37 | #include "presence_detection.hpp" |
| 38 | #include "rail.hpp" |
Shawn McCarney | 0e8c68a | 2020-03-27 01:44:48 -0500 | [diff] [blame] | 39 | #include "rule.hpp" |
Bob King | 315b0b6 | 2020-04-03 21:47:58 +0800 | [diff] [blame] | 40 | #include "run_rule_action.hpp" |
Bob King | a2f2a0d | 2020-04-09 13:32:14 +0800 | [diff] [blame] | 41 | #include "sensor_monitoring.hpp" |
Bob King | 18a6850 | 2020-04-17 14:19:56 +0800 | [diff] [blame] | 42 | #include "set_device_action.hpp" |
Shawn McCarney | 80c0b04 | 2020-03-27 12:08:53 -0500 | [diff] [blame] | 43 | #include "tmp_file.hpp" |
Shawn McCarney | 0e8c68a | 2020-03-27 01:44:48 -0500 | [diff] [blame] | 44 | |
Shawn McCarney | 80c0b04 | 2020-03-27 12:08:53 -0500 | [diff] [blame] | 45 | #include <sys/stat.h> // for chmod() |
Shawn McCarney | 0e8c68a | 2020-03-27 01:44:48 -0500 | [diff] [blame] | 46 | |
| 47 | #include <nlohmann/json.hpp> |
| 48 | |
| 49 | #include <cstdint> |
| 50 | #include <cstring> |
| 51 | #include <exception> |
| 52 | #include <filesystem> |
| 53 | #include <fstream> |
| 54 | #include <memory> |
| 55 | #include <optional> |
| 56 | #include <stdexcept> |
| 57 | #include <string> |
| 58 | #include <tuple> |
| 59 | #include <vector> |
| 60 | |
| 61 | #include <gtest/gtest.h> |
| 62 | |
| 63 | using namespace phosphor::power::regulators; |
| 64 | using namespace phosphor::power::regulators::config_file_parser; |
| 65 | using namespace phosphor::power::regulators::config_file_parser::internal; |
| 66 | using json = nlohmann::json; |
| 67 | |
Shawn McCarney | 0e8c68a | 2020-03-27 01:44:48 -0500 | [diff] [blame] | 68 | void writeConfigFile(const std::filesystem::path& pathName, |
| 69 | const std::string& contents) |
| 70 | { |
| 71 | std::ofstream file{pathName}; |
| 72 | file << contents; |
| 73 | } |
| 74 | |
| 75 | void writeConfigFile(const std::filesystem::path& pathName, |
| 76 | const json& contents) |
| 77 | { |
| 78 | std::ofstream file{pathName}; |
| 79 | file << contents; |
| 80 | } |
| 81 | |
| 82 | TEST(ConfigFileParserTests, Parse) |
| 83 | { |
| 84 | // Test where works |
| 85 | { |
| 86 | const json configFileContents = R"( |
| 87 | { |
| 88 | "rules": [ |
| 89 | { |
| 90 | "id": "set_voltage_rule1", |
| 91 | "actions": [ |
| 92 | { "pmbus_write_vout_command": { "volts": 1.03, "format": "linear" } } |
| 93 | ] |
| 94 | }, |
| 95 | { |
| 96 | "id": "set_voltage_rule2", |
| 97 | "actions": [ |
| 98 | { "pmbus_write_vout_command": { "volts": 1.33, "format": "linear" } } |
| 99 | ] |
| 100 | } |
| 101 | ], |
| 102 | "chassis": [ |
| 103 | { "number": 1 }, |
| 104 | { "number": 2 }, |
| 105 | { "number": 3 } |
| 106 | ] |
| 107 | } |
| 108 | )"_json; |
| 109 | |
| 110 | TmpFile configFile; |
| 111 | std::filesystem::path pathName{configFile.getName()}; |
| 112 | writeConfigFile(pathName, configFileContents); |
| 113 | |
| 114 | std::vector<std::unique_ptr<Rule>> rules{}; |
| 115 | std::vector<std::unique_ptr<Chassis>> chassis{}; |
| 116 | std::tie(rules, chassis) = parse(pathName); |
| 117 | |
| 118 | EXPECT_EQ(rules.size(), 2); |
| 119 | EXPECT_EQ(rules[0]->getID(), "set_voltage_rule1"); |
| 120 | EXPECT_EQ(rules[1]->getID(), "set_voltage_rule2"); |
| 121 | |
Bob King | 0e70113 | 2020-04-03 21:50:31 +0800 | [diff] [blame] | 122 | EXPECT_EQ(chassis.size(), 3); |
| 123 | EXPECT_EQ(chassis[0]->getNumber(), 1); |
| 124 | EXPECT_EQ(chassis[1]->getNumber(), 2); |
| 125 | EXPECT_EQ(chassis[2]->getNumber(), 3); |
Shawn McCarney | 0e8c68a | 2020-03-27 01:44:48 -0500 | [diff] [blame] | 126 | } |
| 127 | |
| 128 | // Test where fails: File does not exist |
| 129 | try |
| 130 | { |
| 131 | std::filesystem::path pathName{"/tmp/non_existent_file"}; |
| 132 | parse(pathName); |
| 133 | ADD_FAILURE() << "Should not have reached this line."; |
| 134 | } |
| 135 | catch (const ConfigFileParserError& e) |
| 136 | { |
| 137 | // Expected exception; what() message will vary |
| 138 | } |
| 139 | |
| 140 | // Test where fails: File is not readable |
| 141 | try |
| 142 | { |
| 143 | const json configFileContents = R"( |
| 144 | { |
| 145 | "chassis": [ { "number": 1 } ] |
| 146 | } |
| 147 | )"_json; |
| 148 | |
| 149 | TmpFile configFile; |
| 150 | std::filesystem::path pathName{configFile.getName()}; |
| 151 | writeConfigFile(pathName, configFileContents); |
| 152 | |
| 153 | chmod(pathName.c_str(), 0222); |
| 154 | |
| 155 | parse(pathName); |
| 156 | ADD_FAILURE() << "Should not have reached this line."; |
| 157 | } |
| 158 | catch (const ConfigFileParserError& e) |
| 159 | { |
| 160 | // Expected exception; what() message will vary |
| 161 | } |
| 162 | |
| 163 | // Test where fails: File is not valid JSON |
| 164 | try |
| 165 | { |
| 166 | const std::string configFileContents = "] foo ["; |
| 167 | |
| 168 | TmpFile configFile; |
| 169 | std::filesystem::path pathName{configFile.getName()}; |
| 170 | writeConfigFile(pathName, configFileContents); |
| 171 | |
| 172 | parse(pathName); |
| 173 | ADD_FAILURE() << "Should not have reached this line."; |
| 174 | } |
| 175 | catch (const ConfigFileParserError& e) |
| 176 | { |
| 177 | // Expected exception; what() message will vary |
| 178 | } |
| 179 | |
| 180 | // Test where fails: Error when parsing JSON elements |
| 181 | try |
| 182 | { |
| 183 | const json configFileContents = R"( { "foo": "bar" } )"_json; |
| 184 | |
| 185 | TmpFile configFile; |
| 186 | std::filesystem::path pathName{configFile.getName()}; |
| 187 | writeConfigFile(pathName, configFileContents); |
| 188 | |
| 189 | parse(pathName); |
| 190 | ADD_FAILURE() << "Should not have reached this line."; |
| 191 | } |
| 192 | catch (const ConfigFileParserError& e) |
| 193 | { |
| 194 | // Expected exception; what() message will vary |
| 195 | } |
| 196 | } |
| 197 | |
| 198 | TEST(ConfigFileParserTests, GetRequiredProperty) |
| 199 | { |
| 200 | // Test where property exists |
| 201 | { |
| 202 | const json element = R"( { "format": "linear" } )"_json; |
| 203 | const json& propertyElement = getRequiredProperty(element, "format"); |
| 204 | EXPECT_EQ(propertyElement.get<std::string>(), "linear"); |
| 205 | } |
| 206 | |
| 207 | // Test where property does not exist |
| 208 | try |
| 209 | { |
| 210 | const json element = R"( { "volts": 1.03 } )"_json; |
| 211 | getRequiredProperty(element, "format"); |
| 212 | ADD_FAILURE() << "Should not have reached this line."; |
| 213 | } |
| 214 | catch (const std::invalid_argument& e) |
| 215 | { |
| 216 | EXPECT_STREQ(e.what(), "Required property missing: format"); |
| 217 | } |
| 218 | } |
| 219 | |
| 220 | TEST(ConfigFileParserTests, ParseAction) |
| 221 | { |
| 222 | // Test where works: comments property specified |
| 223 | { |
| 224 | const json element = R"( |
| 225 | { |
| 226 | "comments": [ "Set output voltage." ], |
| 227 | "pmbus_write_vout_command": { |
| 228 | "format": "linear" |
| 229 | } |
| 230 | } |
| 231 | )"_json; |
| 232 | std::unique_ptr<Action> action = parseAction(element); |
| 233 | EXPECT_NE(action.get(), nullptr); |
| 234 | } |
| 235 | |
| 236 | // Test where works: comments property not specified |
| 237 | { |
| 238 | const json element = R"( |
| 239 | { |
| 240 | "pmbus_write_vout_command": { |
| 241 | "format": "linear" |
| 242 | } |
| 243 | } |
| 244 | )"_json; |
| 245 | std::unique_ptr<Action> action = parseAction(element); |
| 246 | EXPECT_NE(action.get(), nullptr); |
| 247 | } |
| 248 | |
| 249 | // Test where works: and action type specified |
Bob King | 3a78754 | 2020-04-14 13:45:01 +0800 | [diff] [blame] | 250 | { |
| 251 | const json element = R"( |
| 252 | { |
| 253 | "and": [ |
| 254 | { "i2c_compare_byte": { "register": "0xA0", "value": "0x00" } }, |
| 255 | { "i2c_compare_byte": { "register": "0xA1", "value": "0x00" } } |
| 256 | ] |
| 257 | } |
| 258 | )"_json; |
| 259 | std::unique_ptr<Action> action = parseAction(element); |
| 260 | EXPECT_NE(action.get(), nullptr); |
| 261 | } |
Shawn McCarney | 0e8c68a | 2020-03-27 01:44:48 -0500 | [diff] [blame] | 262 | |
| 263 | // Test where works: compare_presence action type specified |
Bob King | b267b7e | 2020-04-22 14:42:39 +0800 | [diff] [blame] | 264 | { |
| 265 | const json element = R"( |
| 266 | { |
| 267 | "compare_presence": |
| 268 | { |
| 269 | "fru": "/system/chassis/motherboard/cpu3", |
| 270 | "value": true |
| 271 | } |
| 272 | } |
| 273 | )"_json; |
| 274 | std::unique_ptr<Action> action = parseAction(element); |
| 275 | EXPECT_NE(action.get(), nullptr); |
| 276 | } |
Shawn McCarney | 0e8c68a | 2020-03-27 01:44:48 -0500 | [diff] [blame] | 277 | |
| 278 | // Test where works: compare_vpd action type specified |
Bob King | f213432 | 2020-04-27 14:14:56 +0800 | [diff] [blame] | 279 | { |
| 280 | const json element = R"( |
| 281 | { |
| 282 | "compare_vpd": |
| 283 | { |
| 284 | "fru": "/system/chassis/disk_backplane", |
| 285 | "keyword": "CCIN", |
| 286 | "value": "2D35" |
| 287 | } |
| 288 | } |
| 289 | )"_json; |
| 290 | std::unique_ptr<Action> action = parseAction(element); |
| 291 | EXPECT_NE(action.get(), nullptr); |
| 292 | } |
Shawn McCarney | 0e8c68a | 2020-03-27 01:44:48 -0500 | [diff] [blame] | 293 | |
| 294 | // Test where works: i2c_compare_bit action type specified |
Bob King | f09bfe0 | 2020-04-13 17:21:15 +0800 | [diff] [blame] | 295 | { |
| 296 | const json element = R"( |
| 297 | { |
| 298 | "i2c_compare_bit": { |
| 299 | "register": "0xA0", |
| 300 | "position": 3, |
| 301 | "value": 0 |
| 302 | } |
| 303 | } |
| 304 | )"_json; |
| 305 | std::unique_ptr<Action> action = parseAction(element); |
| 306 | EXPECT_NE(action.get(), nullptr); |
| 307 | } |
Shawn McCarney | 0e8c68a | 2020-03-27 01:44:48 -0500 | [diff] [blame] | 308 | |
| 309 | // Test where works: i2c_compare_byte action type specified |
Bob King | f09bfe0 | 2020-04-13 17:21:15 +0800 | [diff] [blame] | 310 | { |
| 311 | const json element = R"( |
| 312 | { |
| 313 | "i2c_compare_byte": { |
| 314 | "register": "0x0A", |
| 315 | "value": "0xCC" |
| 316 | } |
| 317 | } |
| 318 | )"_json; |
| 319 | std::unique_ptr<Action> action = parseAction(element); |
| 320 | EXPECT_NE(action.get(), nullptr); |
| 321 | } |
Shawn McCarney | 0e8c68a | 2020-03-27 01:44:48 -0500 | [diff] [blame] | 322 | |
| 323 | // Test where works: i2c_compare_bytes action type specified |
Bob King | f09bfe0 | 2020-04-13 17:21:15 +0800 | [diff] [blame] | 324 | { |
| 325 | const json element = R"( |
| 326 | { |
| 327 | "i2c_compare_bytes": { |
| 328 | "register": "0x0A", |
| 329 | "values": [ "0xCC", "0xFF" ] |
| 330 | } |
| 331 | } |
| 332 | )"_json; |
| 333 | std::unique_ptr<Action> action = parseAction(element); |
| 334 | EXPECT_NE(action.get(), nullptr); |
| 335 | } |
Shawn McCarney | 0e8c68a | 2020-03-27 01:44:48 -0500 | [diff] [blame] | 336 | |
| 337 | // Test where works: i2c_write_bit action type specified |
Bob King | f617f89 | 2020-03-30 19:03:35 +0800 | [diff] [blame] | 338 | { |
| 339 | const json element = R"( |
| 340 | { |
| 341 | "i2c_write_bit": { |
| 342 | "register": "0xA0", |
| 343 | "position": 3, |
| 344 | "value": 0 |
| 345 | } |
| 346 | } |
| 347 | )"_json; |
| 348 | std::unique_ptr<Action> action = parseAction(element); |
| 349 | EXPECT_NE(action.get(), nullptr); |
| 350 | } |
Shawn McCarney | 0e8c68a | 2020-03-27 01:44:48 -0500 | [diff] [blame] | 351 | |
| 352 | // Test where works: i2c_write_byte action type specified |
Bob King | 87ff9d7 | 2020-03-31 14:02:55 +0800 | [diff] [blame] | 353 | { |
| 354 | const json element = R"( |
| 355 | { |
| 356 | "i2c_write_byte": { |
| 357 | "register": "0x0A", |
| 358 | "value": "0xCC" |
| 359 | } |
| 360 | } |
| 361 | )"_json; |
| 362 | std::unique_ptr<Action> action = parseAction(element); |
| 363 | EXPECT_NE(action.get(), nullptr); |
| 364 | } |
Shawn McCarney | 0e8c68a | 2020-03-27 01:44:48 -0500 | [diff] [blame] | 365 | |
| 366 | // Test where works: i2c_write_bytes action type specified |
Bob King | bafcb86 | 2020-03-31 16:39:00 +0800 | [diff] [blame] | 367 | { |
| 368 | const json element = R"( |
| 369 | { |
| 370 | "i2c_write_bytes": { |
| 371 | "register": "0x0A", |
| 372 | "values": [ "0xCC", "0xFF" ] |
| 373 | } |
| 374 | } |
| 375 | )"_json; |
| 376 | std::unique_ptr<Action> action = parseAction(element); |
| 377 | EXPECT_NE(action.get(), nullptr); |
| 378 | } |
Shawn McCarney | 0e8c68a | 2020-03-27 01:44:48 -0500 | [diff] [blame] | 379 | |
| 380 | // Test where works: if action type specified |
Bob King | 93a89d7 | 2020-04-15 15:11:11 +0800 | [diff] [blame] | 381 | { |
| 382 | const json element = R"( |
| 383 | { |
| 384 | "if": |
| 385 | { |
| 386 | "condition": { "run_rule": "is_downlevel_regulator" }, |
| 387 | "then": [ { "run_rule": "configure_downlevel_regulator" } ], |
| 388 | "else": [ { "run_rule": "configure_standard_regulator" } ] |
| 389 | } |
| 390 | } |
| 391 | )"_json; |
| 392 | std::unique_ptr<Action> action = parseAction(element); |
| 393 | EXPECT_NE(action.get(), nullptr); |
| 394 | } |
Shawn McCarney | 0e8c68a | 2020-03-27 01:44:48 -0500 | [diff] [blame] | 395 | |
| 396 | // Test where works: not action type specified |
Bob King | f1b58dc | 2020-04-14 14:53:10 +0800 | [diff] [blame] | 397 | { |
| 398 | const json element = R"( |
| 399 | { |
| 400 | "not": |
| 401 | { "i2c_compare_byte": { "register": "0xA0", "value": "0xFF" } } |
| 402 | } |
| 403 | )"_json; |
| 404 | std::unique_ptr<Action> action = parseAction(element); |
| 405 | EXPECT_NE(action.get(), nullptr); |
| 406 | } |
Shawn McCarney | 0e8c68a | 2020-03-27 01:44:48 -0500 | [diff] [blame] | 407 | |
| 408 | // Test where works: or action type specified |
Bob King | 0b51a9b | 2020-04-15 13:24:18 +0800 | [diff] [blame] | 409 | { |
| 410 | const json element = R"( |
| 411 | { |
| 412 | "or": [ |
| 413 | { "i2c_compare_byte": { "register": "0xA0", "value": "0x00" } }, |
| 414 | { "i2c_compare_byte": { "register": "0xA1", "value": "0x00" } } |
| 415 | ] |
| 416 | } |
| 417 | )"_json; |
| 418 | std::unique_ptr<Action> action = parseAction(element); |
| 419 | EXPECT_NE(action.get(), nullptr); |
| 420 | } |
Shawn McCarney | 0e8c68a | 2020-03-27 01:44:48 -0500 | [diff] [blame] | 421 | |
| 422 | // Test where works: pmbus_read_sensor action type specified |
Bob King | 8461488 | 2020-04-30 13:13:48 +0800 | [diff] [blame] | 423 | { |
| 424 | const json element = R"( |
| 425 | { |
| 426 | "pmbus_read_sensor": { |
| 427 | "type": "iout", |
| 428 | "command": "0x8C", |
| 429 | "format": "linear_11" |
| 430 | } |
| 431 | } |
| 432 | )"_json; |
| 433 | std::unique_ptr<Action> action = parseAction(element); |
| 434 | EXPECT_NE(action.get(), nullptr); |
| 435 | } |
Shawn McCarney | 0e8c68a | 2020-03-27 01:44:48 -0500 | [diff] [blame] | 436 | |
| 437 | // Test where works: pmbus_write_vout_command action type specified |
| 438 | { |
| 439 | const json element = R"( |
| 440 | { |
| 441 | "pmbus_write_vout_command": { |
| 442 | "format": "linear" |
| 443 | } |
| 444 | } |
| 445 | )"_json; |
| 446 | std::unique_ptr<Action> action = parseAction(element); |
| 447 | EXPECT_NE(action.get(), nullptr); |
| 448 | } |
| 449 | |
| 450 | // Test where works: run_rule action type specified |
Bob King | 315b0b6 | 2020-04-03 21:47:58 +0800 | [diff] [blame] | 451 | { |
| 452 | const json element = R"( |
| 453 | { |
| 454 | "run_rule": "set_voltage_rule" |
| 455 | } |
| 456 | )"_json; |
| 457 | std::unique_ptr<Action> action = parseAction(element); |
| 458 | EXPECT_NE(action.get(), nullptr); |
| 459 | } |
Shawn McCarney | 0e8c68a | 2020-03-27 01:44:48 -0500 | [diff] [blame] | 460 | |
| 461 | // Test where works: set_device action type specified |
Bob King | 18a6850 | 2020-04-17 14:19:56 +0800 | [diff] [blame] | 462 | { |
| 463 | const json element = R"( |
| 464 | { |
| 465 | "set_device": "io_expander2" |
| 466 | } |
| 467 | )"_json; |
| 468 | std::unique_ptr<Action> action = parseAction(element); |
| 469 | EXPECT_NE(action.get(), nullptr); |
| 470 | } |
Shawn McCarney | 0e8c68a | 2020-03-27 01:44:48 -0500 | [diff] [blame] | 471 | |
| 472 | // Test where fails: Element is not an object |
| 473 | try |
| 474 | { |
| 475 | const json element = R"( [ "0xFF", "0x01" ] )"_json; |
| 476 | parseAction(element); |
| 477 | ADD_FAILURE() << "Should not have reached this line."; |
| 478 | } |
| 479 | catch (const std::invalid_argument& e) |
| 480 | { |
| 481 | EXPECT_STREQ(e.what(), "Element is not an object"); |
| 482 | } |
| 483 | |
| 484 | // Test where fails: No action type specified |
| 485 | try |
| 486 | { |
| 487 | const json element = R"( |
| 488 | { |
| 489 | "comments": [ "Set output voltage." ] |
| 490 | } |
| 491 | )"_json; |
| 492 | parseAction(element); |
| 493 | ADD_FAILURE() << "Should not have reached this line."; |
| 494 | } |
| 495 | catch (const std::invalid_argument& e) |
| 496 | { |
| 497 | EXPECT_STREQ(e.what(), "Required action type property missing"); |
| 498 | } |
| 499 | |
| 500 | // Test where fails: Multiple action types specified |
Bob King | 0e70113 | 2020-04-03 21:50:31 +0800 | [diff] [blame] | 501 | try |
| 502 | { |
| 503 | const json element = R"( |
| 504 | { |
| 505 | "pmbus_write_vout_command": { "format": "linear" }, |
| 506 | "run_rule": "set_voltage_rule" |
| 507 | } |
| 508 | )"_json; |
| 509 | parseAction(element); |
| 510 | ADD_FAILURE() << "Should not have reached this line."; |
| 511 | } |
| 512 | catch (const std::invalid_argument& e) |
| 513 | { |
| 514 | EXPECT_STREQ(e.what(), "Element contains an invalid property"); |
| 515 | } |
Shawn McCarney | 0e8c68a | 2020-03-27 01:44:48 -0500 | [diff] [blame] | 516 | |
| 517 | // Test where fails: Invalid property specified |
| 518 | try |
| 519 | { |
| 520 | const json element = R"( |
| 521 | { |
| 522 | "remarks": [ "Set output voltage." ], |
| 523 | "pmbus_write_vout_command": { |
| 524 | "format": "linear" |
| 525 | } |
| 526 | } |
| 527 | )"_json; |
| 528 | parseAction(element); |
| 529 | ADD_FAILURE() << "Should not have reached this line."; |
| 530 | } |
| 531 | catch (const std::invalid_argument& e) |
| 532 | { |
| 533 | EXPECT_STREQ(e.what(), "Element contains an invalid property"); |
| 534 | } |
| 535 | } |
| 536 | |
| 537 | TEST(ConfigFileParserTests, ParseActionArray) |
| 538 | { |
| 539 | // Test where works |
| 540 | { |
| 541 | const json element = R"( |
| 542 | [ |
| 543 | { "pmbus_write_vout_command": { "volts": 1.01, "format": "linear" } }, |
| 544 | { "pmbus_write_vout_command": { "volts": 1.03, "format": "linear" } } |
| 545 | ] |
| 546 | )"_json; |
| 547 | std::vector<std::unique_ptr<Action>> actions = |
| 548 | parseActionArray(element); |
| 549 | EXPECT_EQ(actions.size(), 2); |
| 550 | } |
| 551 | |
| 552 | // Test where fails: Element is not an array |
| 553 | try |
| 554 | { |
| 555 | const json element = R"( |
| 556 | { |
| 557 | "foo": "bar" |
| 558 | } |
| 559 | )"_json; |
| 560 | parseActionArray(element); |
| 561 | ADD_FAILURE() << "Should not have reached this line."; |
| 562 | } |
| 563 | catch (const std::invalid_argument& e) |
| 564 | { |
| 565 | EXPECT_STREQ(e.what(), "Element is not an array"); |
| 566 | } |
| 567 | } |
| 568 | |
Bob King | 3a78754 | 2020-04-14 13:45:01 +0800 | [diff] [blame] | 569 | TEST(ConfigFileParserTests, ParseAnd) |
| 570 | { |
| 571 | // Test where works: Element is an array with 2 actions |
| 572 | { |
| 573 | const json element = R"( |
| 574 | [ |
| 575 | { "i2c_compare_byte": { "register": "0xA0", "value": "0x00" } }, |
| 576 | { "i2c_compare_byte": { "register": "0xA1", "value": "0x00" } } |
| 577 | ] |
| 578 | )"_json; |
| 579 | std::unique_ptr<AndAction> action = parseAnd(element); |
| 580 | EXPECT_EQ(action->getActions().size(), 2); |
| 581 | } |
| 582 | |
| 583 | // Test where fails: Element is an array with 1 action |
| 584 | try |
| 585 | { |
| 586 | const json element = R"( |
| 587 | [ |
| 588 | { "i2c_compare_byte": { "register": "0xA0", "value": "0x00" } } |
| 589 | ] |
| 590 | )"_json; |
| 591 | parseAnd(element); |
| 592 | ADD_FAILURE() << "Should not have reached this line."; |
| 593 | } |
| 594 | catch (const std::invalid_argument& e) |
| 595 | { |
| 596 | EXPECT_STREQ(e.what(), "Array must contain two or more actions"); |
| 597 | } |
| 598 | |
| 599 | // Test where fails: Element is not an array |
| 600 | try |
| 601 | { |
| 602 | const json element = R"( |
| 603 | { |
| 604 | "foo": "bar" |
| 605 | } |
| 606 | )"_json; |
| 607 | parseAnd(element); |
| 608 | ADD_FAILURE() << "Should not have reached this line."; |
| 609 | } |
| 610 | catch (const std::invalid_argument& e) |
| 611 | { |
| 612 | EXPECT_STREQ(e.what(), "Element is not an array"); |
| 613 | } |
| 614 | } |
| 615 | |
Bob King | f617f89 | 2020-03-30 19:03:35 +0800 | [diff] [blame] | 616 | TEST(ConfigFileParserTests, ParseBitPosition) |
| 617 | { |
| 618 | // Test where works: 0 |
| 619 | { |
| 620 | const json element = R"( 0 )"_json; |
| 621 | uint8_t value = parseBitPosition(element); |
| 622 | EXPECT_EQ(value, 0); |
| 623 | } |
| 624 | |
| 625 | // Test where works: 7 |
| 626 | { |
| 627 | const json element = R"( 7 )"_json; |
| 628 | uint8_t value = parseBitPosition(element); |
| 629 | EXPECT_EQ(value, 7); |
| 630 | } |
| 631 | |
| 632 | // Test where fails: Element is not an integer |
| 633 | try |
| 634 | { |
| 635 | const json element = R"( 1.03 )"_json; |
| 636 | parseBitPosition(element); |
| 637 | ADD_FAILURE() << "Should not have reached this line."; |
| 638 | } |
| 639 | catch (const std::invalid_argument& e) |
| 640 | { |
| 641 | EXPECT_STREQ(e.what(), "Element is not an integer"); |
| 642 | } |
| 643 | |
| 644 | // Test where fails: Value < 0 |
| 645 | try |
| 646 | { |
| 647 | const json element = R"( -1 )"_json; |
| 648 | parseBitPosition(element); |
| 649 | ADD_FAILURE() << "Should not have reached this line."; |
| 650 | } |
| 651 | catch (const std::invalid_argument& e) |
| 652 | { |
| 653 | EXPECT_STREQ(e.what(), "Element is not a bit position"); |
| 654 | } |
| 655 | |
| 656 | // Test where fails: Value > 7 |
| 657 | try |
| 658 | { |
| 659 | const json element = R"( 8 )"_json; |
| 660 | parseBitPosition(element); |
| 661 | ADD_FAILURE() << "Should not have reached this line."; |
| 662 | } |
| 663 | catch (const std::invalid_argument& e) |
| 664 | { |
| 665 | EXPECT_STREQ(e.what(), "Element is not a bit position"); |
| 666 | } |
| 667 | } |
| 668 | |
| 669 | TEST(ConfigFileParserTests, ParseBitValue) |
| 670 | { |
| 671 | // Test where works: 0 |
| 672 | { |
| 673 | const json element = R"( 0 )"_json; |
| 674 | uint8_t value = parseBitValue(element); |
| 675 | EXPECT_EQ(value, 0); |
| 676 | } |
| 677 | |
| 678 | // Test where works: 1 |
| 679 | { |
| 680 | const json element = R"( 1 )"_json; |
| 681 | uint8_t value = parseBitValue(element); |
| 682 | EXPECT_EQ(value, 1); |
| 683 | } |
| 684 | |
| 685 | // Test where fails: Element is not an integer |
| 686 | try |
| 687 | { |
| 688 | const json element = R"( 0.5 )"_json; |
| 689 | parseBitValue(element); |
| 690 | ADD_FAILURE() << "Should not have reached this line."; |
| 691 | } |
| 692 | catch (const std::invalid_argument& e) |
| 693 | { |
| 694 | EXPECT_STREQ(e.what(), "Element is not an integer"); |
| 695 | } |
| 696 | |
| 697 | // Test where fails: Value < 0 |
| 698 | try |
| 699 | { |
| 700 | const json element = R"( -1 )"_json; |
| 701 | parseBitValue(element); |
| 702 | ADD_FAILURE() << "Should not have reached this line."; |
| 703 | } |
| 704 | catch (const std::invalid_argument& e) |
| 705 | { |
| 706 | EXPECT_STREQ(e.what(), "Element is not a bit value"); |
| 707 | } |
| 708 | |
| 709 | // Test where fails: Value > 1 |
| 710 | try |
| 711 | { |
| 712 | const json element = R"( 2 )"_json; |
| 713 | parseBitValue(element); |
| 714 | ADD_FAILURE() << "Should not have reached this line."; |
| 715 | } |
| 716 | catch (const std::invalid_argument& e) |
| 717 | { |
| 718 | EXPECT_STREQ(e.what(), "Element is not a bit value"); |
| 719 | } |
| 720 | } |
| 721 | |
Shawn McCarney | 0e8c68a | 2020-03-27 01:44:48 -0500 | [diff] [blame] | 722 | TEST(ConfigFileParserTests, ParseBoolean) |
| 723 | { |
| 724 | // Test where works: true |
| 725 | { |
| 726 | const json element = R"( true )"_json; |
| 727 | bool value = parseBoolean(element); |
| 728 | EXPECT_EQ(value, true); |
| 729 | } |
| 730 | |
| 731 | // Test where works: false |
| 732 | { |
| 733 | const json element = R"( false )"_json; |
| 734 | bool value = parseBoolean(element); |
| 735 | EXPECT_EQ(value, false); |
| 736 | } |
| 737 | |
| 738 | // Test where fails: Element is not a boolean |
| 739 | try |
| 740 | { |
| 741 | const json element = R"( 1 )"_json; |
| 742 | parseBoolean(element); |
| 743 | ADD_FAILURE() << "Should not have reached this line."; |
| 744 | } |
| 745 | catch (const std::invalid_argument& e) |
| 746 | { |
| 747 | EXPECT_STREQ(e.what(), "Element is not a boolean"); |
| 748 | } |
| 749 | } |
| 750 | |
Bob King | 0e70113 | 2020-04-03 21:50:31 +0800 | [diff] [blame] | 751 | TEST(ConfigFileParserTests, ParseChassis) |
| 752 | { |
| 753 | // Test where works: Only required properties specified |
| 754 | { |
| 755 | const json element = R"( |
| 756 | { |
| 757 | "number": 1 |
| 758 | } |
| 759 | )"_json; |
| 760 | std::unique_ptr<Chassis> chassis = parseChassis(element); |
| 761 | EXPECT_EQ(chassis->getNumber(), 1); |
Bob King | 9c36c5f | 2020-04-06 11:34:09 +0800 | [diff] [blame] | 762 | EXPECT_EQ(chassis->getDevices().size(), 0); |
Bob King | 0e70113 | 2020-04-03 21:50:31 +0800 | [diff] [blame] | 763 | } |
| 764 | |
| 765 | // Test where works: All properties specified |
| 766 | { |
| 767 | const json element = R"( |
| 768 | { |
| 769 | "comments": [ "comments property" ], |
| 770 | "number": 2, |
| 771 | "devices": [ |
| 772 | { |
| 773 | "id": "vdd_regulator", |
| 774 | "is_regulator": true, |
| 775 | "fru": "/system/chassis/motherboard/regulator2", |
| 776 | "i2c_interface": |
| 777 | { |
| 778 | "bus": 1, |
| 779 | "address": "0x70" |
| 780 | } |
| 781 | } |
| 782 | ] |
| 783 | } |
| 784 | )"_json; |
| 785 | std::unique_ptr<Chassis> chassis = parseChassis(element); |
| 786 | EXPECT_EQ(chassis->getNumber(), 2); |
Bob King | 9c36c5f | 2020-04-06 11:34:09 +0800 | [diff] [blame] | 787 | EXPECT_EQ(chassis->getDevices().size(), 1); |
| 788 | EXPECT_EQ(chassis->getDevices()[0]->getID(), "vdd_regulator"); |
Bob King | 0e70113 | 2020-04-03 21:50:31 +0800 | [diff] [blame] | 789 | } |
| 790 | |
| 791 | // Test where fails: number value is invalid |
| 792 | try |
| 793 | { |
| 794 | const json element = R"( |
| 795 | { |
| 796 | "number": 0.5 |
| 797 | } |
| 798 | )"_json; |
| 799 | parseChassis(element); |
| 800 | ADD_FAILURE() << "Should not have reached this line."; |
| 801 | } |
| 802 | catch (const std::invalid_argument& e) |
| 803 | { |
| 804 | EXPECT_STREQ(e.what(), "Element is not an unsigned integer"); |
| 805 | } |
| 806 | |
| 807 | // Test where fails: Invalid property specified |
| 808 | try |
| 809 | { |
| 810 | const json element = R"( |
| 811 | { |
| 812 | "number": 1, |
| 813 | "foo": 2 |
| 814 | } |
| 815 | )"_json; |
| 816 | parseChassis(element); |
| 817 | ADD_FAILURE() << "Should not have reached this line."; |
| 818 | } |
| 819 | catch (const std::invalid_argument& e) |
| 820 | { |
| 821 | EXPECT_STREQ(e.what(), "Element contains an invalid property"); |
| 822 | } |
| 823 | |
| 824 | // Test where fails: Required number property not specified |
| 825 | try |
| 826 | { |
| 827 | const json element = R"( |
| 828 | { |
| 829 | "devices": [ |
| 830 | { |
| 831 | "id": "vdd_regulator", |
| 832 | "is_regulator": true, |
| 833 | "fru": "/system/chassis/motherboard/regulator2", |
| 834 | "i2c_interface": |
| 835 | { |
| 836 | "bus": 1, |
| 837 | "address": "0x70" |
| 838 | } |
| 839 | } |
| 840 | ] |
| 841 | } |
| 842 | )"_json; |
| 843 | parseChassis(element); |
| 844 | ADD_FAILURE() << "Should not have reached this line."; |
| 845 | } |
| 846 | catch (const std::invalid_argument& e) |
| 847 | { |
| 848 | EXPECT_STREQ(e.what(), "Required property missing: number"); |
| 849 | } |
| 850 | |
| 851 | // Test where fails: Element is not an object |
| 852 | try |
| 853 | { |
| 854 | const json element = R"( [ "0xFF", "0x01" ] )"_json; |
| 855 | parseChassis(element); |
| 856 | ADD_FAILURE() << "Should not have reached this line."; |
| 857 | } |
| 858 | catch (const std::invalid_argument& e) |
| 859 | { |
| 860 | EXPECT_STREQ(e.what(), "Element is not an object"); |
| 861 | } |
| 862 | |
| 863 | // Test where fails: number value is < 1 |
| 864 | try |
| 865 | { |
| 866 | const json element = R"( |
| 867 | { |
| 868 | "number": 0 |
| 869 | } |
| 870 | )"_json; |
| 871 | parseChassis(element); |
| 872 | ADD_FAILURE() << "Should not have reached this line."; |
| 873 | } |
| 874 | catch (const std::invalid_argument& e) |
| 875 | { |
| 876 | EXPECT_STREQ(e.what(), "Invalid chassis number: Must be > 0"); |
| 877 | } |
| 878 | |
| 879 | // Test where fails: devices value is invalid |
| 880 | try |
| 881 | { |
| 882 | const json element = R"( |
| 883 | { |
| 884 | "number": 1, |
| 885 | "devices": 2 |
| 886 | } |
| 887 | )"_json; |
| 888 | parseChassis(element); |
| 889 | ADD_FAILURE() << "Should not have reached this line."; |
| 890 | } |
| 891 | catch (const std::invalid_argument& e) |
| 892 | { |
| 893 | EXPECT_STREQ(e.what(), "Element is not an array"); |
| 894 | } |
| 895 | } |
| 896 | |
Shawn McCarney | 0e8c68a | 2020-03-27 01:44:48 -0500 | [diff] [blame] | 897 | TEST(ConfigFileParserTests, ParseChassisArray) |
| 898 | { |
Bob King | 0e70113 | 2020-04-03 21:50:31 +0800 | [diff] [blame] | 899 | // Test where works |
| 900 | { |
| 901 | const json element = R"( |
| 902 | [ |
| 903 | { "number": 1 }, |
| 904 | { "number": 2 } |
| 905 | ] |
| 906 | )"_json; |
| 907 | std::vector<std::unique_ptr<Chassis>> chassis = |
| 908 | parseChassisArray(element); |
| 909 | EXPECT_EQ(chassis.size(), 2); |
| 910 | EXPECT_EQ(chassis[0]->getNumber(), 1); |
| 911 | EXPECT_EQ(chassis[1]->getNumber(), 2); |
| 912 | } |
| 913 | |
| 914 | // Test where fails: Element is not an array |
| 915 | try |
| 916 | { |
| 917 | const json element = R"( |
| 918 | { |
| 919 | "foo": "bar" |
| 920 | } |
| 921 | )"_json; |
| 922 | parseChassisArray(element); |
| 923 | ADD_FAILURE() << "Should not have reached this line."; |
| 924 | } |
| 925 | catch (const std::invalid_argument& e) |
| 926 | { |
| 927 | EXPECT_STREQ(e.what(), "Element is not an array"); |
| 928 | } |
Shawn McCarney | 0e8c68a | 2020-03-27 01:44:48 -0500 | [diff] [blame] | 929 | } |
| 930 | |
Bob King | b267b7e | 2020-04-22 14:42:39 +0800 | [diff] [blame] | 931 | TEST(ConfigFileParserTests, ParseComparePresence) |
| 932 | { |
| 933 | // Test where works |
| 934 | { |
| 935 | const json element = R"( |
| 936 | { |
| 937 | "fru": "/system/chassis/motherboard/cpu3", |
| 938 | "value": true |
| 939 | } |
| 940 | )"_json; |
| 941 | std::unique_ptr<ComparePresenceAction> action = |
| 942 | parseComparePresence(element); |
| 943 | EXPECT_EQ(action->getFRU(), "/system/chassis/motherboard/cpu3"); |
| 944 | EXPECT_EQ(action->getValue(), true); |
| 945 | } |
| 946 | |
| 947 | // Test where fails: Element is not an object |
| 948 | try |
| 949 | { |
| 950 | const json element = R"( [ "0xFF", "0x01" ] )"_json; |
| 951 | parseComparePresence(element); |
| 952 | ADD_FAILURE() << "Should not have reached this line."; |
| 953 | } |
| 954 | catch (const std::invalid_argument& e) |
| 955 | { |
| 956 | EXPECT_STREQ(e.what(), "Element is not an object"); |
| 957 | } |
| 958 | |
| 959 | // Test where fails: Invalid property specified |
| 960 | try |
| 961 | { |
| 962 | const json element = R"( |
| 963 | { |
| 964 | "fru": "/system/chassis/motherboard/cpu3", |
| 965 | "value": true, |
| 966 | "foo" : true |
| 967 | } |
| 968 | )"_json; |
| 969 | parseComparePresence(element); |
| 970 | ADD_FAILURE() << "Should not have reached this line."; |
| 971 | } |
| 972 | catch (const std::invalid_argument& e) |
| 973 | { |
| 974 | EXPECT_STREQ(e.what(), "Element contains an invalid property"); |
| 975 | } |
| 976 | |
| 977 | // Test where fails: Required fru property not specified |
| 978 | try |
| 979 | { |
| 980 | const json element = R"( |
| 981 | { |
| 982 | "value": true |
| 983 | } |
| 984 | )"_json; |
| 985 | parseComparePresence(element); |
| 986 | ADD_FAILURE() << "Should not have reached this line."; |
| 987 | } |
| 988 | catch (const std::invalid_argument& e) |
| 989 | { |
| 990 | EXPECT_STREQ(e.what(), "Required property missing: fru"); |
| 991 | } |
| 992 | |
| 993 | // Test where fails: Required value property not specified |
| 994 | try |
| 995 | { |
| 996 | const json element = R"( |
| 997 | { |
| 998 | "fru": "/system/chassis/motherboard/cpu3" |
| 999 | } |
| 1000 | )"_json; |
| 1001 | parseComparePresence(element); |
| 1002 | ADD_FAILURE() << "Should not have reached this line."; |
| 1003 | } |
| 1004 | catch (const std::invalid_argument& e) |
| 1005 | { |
| 1006 | EXPECT_STREQ(e.what(), "Required property missing: value"); |
| 1007 | } |
| 1008 | |
| 1009 | // Test where fails: fru value is invalid |
| 1010 | try |
| 1011 | { |
| 1012 | const json element = R"( |
| 1013 | { |
| 1014 | "fru": 1, |
| 1015 | "value": true |
| 1016 | } |
| 1017 | )"_json; |
| 1018 | parseComparePresence(element); |
| 1019 | ADD_FAILURE() << "Should not have reached this line."; |
| 1020 | } |
| 1021 | catch (const std::invalid_argument& e) |
| 1022 | { |
| 1023 | EXPECT_STREQ(e.what(), "Element is not a string"); |
| 1024 | } |
| 1025 | |
| 1026 | // Test where fails: value value is invalid |
| 1027 | try |
| 1028 | { |
| 1029 | const json element = R"( |
| 1030 | { |
| 1031 | "fru": "/system/chassis/motherboard/cpu3", |
| 1032 | "value": 1 |
| 1033 | } |
| 1034 | )"_json; |
| 1035 | parseComparePresence(element); |
| 1036 | ADD_FAILURE() << "Should not have reached this line."; |
| 1037 | } |
| 1038 | catch (const std::invalid_argument& e) |
| 1039 | { |
| 1040 | EXPECT_STREQ(e.what(), "Element is not a boolean"); |
| 1041 | } |
| 1042 | } |
| 1043 | |
Bob King | f213432 | 2020-04-27 14:14:56 +0800 | [diff] [blame] | 1044 | TEST(ConfigFileParserTests, ParseCompareVPD) |
| 1045 | { |
| 1046 | // Test where works |
| 1047 | { |
| 1048 | const json element = R"( |
| 1049 | { |
| 1050 | "fru": "/system/chassis/disk_backplane", |
| 1051 | "keyword": "CCIN", |
| 1052 | "value": "2D35" |
| 1053 | } |
| 1054 | )"_json; |
| 1055 | std::unique_ptr<CompareVPDAction> action = parseCompareVPD(element); |
| 1056 | EXPECT_EQ(action->getFRU(), "/system/chassis/disk_backplane"); |
| 1057 | EXPECT_EQ(action->getKeyword(), "CCIN"); |
| 1058 | EXPECT_EQ(action->getValue(), "2D35"); |
| 1059 | } |
| 1060 | |
| 1061 | // Test where fails: Element is not an object |
| 1062 | try |
| 1063 | { |
| 1064 | const json element = R"( [ "0xFF", "0x01" ] )"_json; |
| 1065 | parseCompareVPD(element); |
| 1066 | ADD_FAILURE() << "Should not have reached this line."; |
| 1067 | } |
| 1068 | catch (const std::invalid_argument& e) |
| 1069 | { |
| 1070 | EXPECT_STREQ(e.what(), "Element is not an object"); |
| 1071 | } |
| 1072 | |
| 1073 | // Test where fails: Invalid property specified |
| 1074 | try |
| 1075 | { |
| 1076 | const json element = R"( |
| 1077 | { |
| 1078 | "fru": "/system/chassis/disk_backplane", |
| 1079 | "keyword": "CCIN", |
| 1080 | "value": "2D35", |
| 1081 | "foo" : true |
| 1082 | } |
| 1083 | )"_json; |
| 1084 | parseCompareVPD(element); |
| 1085 | ADD_FAILURE() << "Should not have reached this line."; |
| 1086 | } |
| 1087 | catch (const std::invalid_argument& e) |
| 1088 | { |
| 1089 | EXPECT_STREQ(e.what(), "Element contains an invalid property"); |
| 1090 | } |
| 1091 | |
| 1092 | // Test where fails: Required fru property not specified |
| 1093 | try |
| 1094 | { |
| 1095 | const json element = R"( |
| 1096 | { |
| 1097 | "keyword": "CCIN", |
| 1098 | "value": "2D35" |
| 1099 | } |
| 1100 | )"_json; |
| 1101 | parseCompareVPD(element); |
| 1102 | ADD_FAILURE() << "Should not have reached this line."; |
| 1103 | } |
| 1104 | catch (const std::invalid_argument& e) |
| 1105 | { |
| 1106 | EXPECT_STREQ(e.what(), "Required property missing: fru"); |
| 1107 | } |
| 1108 | |
| 1109 | // Test where fails: Required keyword property not specified |
| 1110 | try |
| 1111 | { |
| 1112 | const json element = R"( |
| 1113 | { |
| 1114 | "fru": "/system/chassis/disk_backplane", |
| 1115 | "value": "2D35" |
| 1116 | } |
| 1117 | )"_json; |
| 1118 | parseCompareVPD(element); |
| 1119 | ADD_FAILURE() << "Should not have reached this line."; |
| 1120 | } |
| 1121 | catch (const std::invalid_argument& e) |
| 1122 | { |
| 1123 | EXPECT_STREQ(e.what(), "Required property missing: keyword"); |
| 1124 | } |
| 1125 | |
| 1126 | // Test where fails: Required value property not specified |
| 1127 | try |
| 1128 | { |
| 1129 | const json element = R"( |
| 1130 | { |
| 1131 | "fru": "/system/chassis/disk_backplane", |
| 1132 | "keyword": "CCIN" |
| 1133 | } |
| 1134 | )"_json; |
| 1135 | parseCompareVPD(element); |
| 1136 | ADD_FAILURE() << "Should not have reached this line."; |
| 1137 | } |
| 1138 | catch (const std::invalid_argument& e) |
| 1139 | { |
| 1140 | EXPECT_STREQ(e.what(), "Required property missing: value"); |
| 1141 | } |
| 1142 | |
| 1143 | // Test where fails: fru value is invalid |
| 1144 | try |
| 1145 | { |
| 1146 | const json element = R"( |
| 1147 | { |
| 1148 | "fru": 1, |
| 1149 | "keyword": "CCIN", |
| 1150 | "value": "2D35" |
| 1151 | } |
| 1152 | )"_json; |
| 1153 | parseCompareVPD(element); |
| 1154 | ADD_FAILURE() << "Should not have reached this line."; |
| 1155 | } |
| 1156 | catch (const std::invalid_argument& e) |
| 1157 | { |
| 1158 | EXPECT_STREQ(e.what(), "Element is not a string"); |
| 1159 | } |
| 1160 | |
| 1161 | // Test where fails: keyword value is invalid |
| 1162 | try |
| 1163 | { |
| 1164 | const json element = R"( |
| 1165 | { |
| 1166 | "fru": "/system/chassis/disk_backplane", |
| 1167 | "keyword": 1, |
| 1168 | "value": "2D35" |
| 1169 | } |
| 1170 | )"_json; |
| 1171 | parseCompareVPD(element); |
| 1172 | ADD_FAILURE() << "Should not have reached this line."; |
| 1173 | } |
| 1174 | catch (const std::invalid_argument& e) |
| 1175 | { |
| 1176 | EXPECT_STREQ(e.what(), "Element is not a string"); |
| 1177 | } |
| 1178 | |
| 1179 | // Test where fails: value value is invalid |
| 1180 | try |
| 1181 | { |
| 1182 | const json element = R"( |
| 1183 | { |
| 1184 | "fru": "/system/chassis/disk_backplane", |
| 1185 | "keyword": "CCIN", |
| 1186 | "value": 1 |
| 1187 | } |
| 1188 | )"_json; |
| 1189 | parseCompareVPD(element); |
| 1190 | ADD_FAILURE() << "Should not have reached this line."; |
| 1191 | } |
| 1192 | catch (const std::invalid_argument& e) |
| 1193 | { |
| 1194 | EXPECT_STREQ(e.what(), "Element is not a string"); |
| 1195 | } |
| 1196 | } |
| 1197 | |
Bob King | 33e7eaa | 2020-04-01 18:09:34 +0800 | [diff] [blame] | 1198 | TEST(ConfigFileParserTests, ParseConfiguration) |
| 1199 | { |
| 1200 | // Test where works: actions required property specified |
| 1201 | { |
| 1202 | const json element = R"( |
| 1203 | { |
| 1204 | "actions": [ |
| 1205 | { |
| 1206 | "pmbus_write_vout_command": { |
| 1207 | "format": "linear" |
| 1208 | } |
| 1209 | } |
| 1210 | ] |
| 1211 | } |
| 1212 | )"_json; |
| 1213 | std::unique_ptr<Configuration> configuration = |
| 1214 | parseConfiguration(element); |
| 1215 | EXPECT_EQ(configuration->getActions().size(), 1); |
| 1216 | EXPECT_EQ(configuration->getVolts().has_value(), false); |
| 1217 | } |
| 1218 | |
| 1219 | // Test where works: volts and actions properties specified |
| 1220 | { |
| 1221 | const json element = R"( |
| 1222 | { |
| 1223 | "comments": [ "comments property" ], |
| 1224 | "volts": 1.03, |
| 1225 | "actions": [ |
| 1226 | { "pmbus_write_vout_command": { "format": "linear" } }, |
| 1227 | { "run_rule": "set_voltage_rule" } |
| 1228 | ] |
| 1229 | } |
| 1230 | )"_json; |
| 1231 | std::unique_ptr<Configuration> configuration = |
| 1232 | parseConfiguration(element); |
| 1233 | EXPECT_EQ(configuration->getVolts().has_value(), true); |
| 1234 | EXPECT_EQ(configuration->getVolts().value(), 1.03); |
| 1235 | EXPECT_EQ(configuration->getActions().size(), 2); |
| 1236 | } |
| 1237 | |
| 1238 | // Test where works: volts and rule_id properties specified |
| 1239 | { |
| 1240 | const json element = R"( |
| 1241 | { |
| 1242 | "volts": 1.05, |
| 1243 | "rule_id": "set_voltage_rule" |
| 1244 | } |
| 1245 | )"_json; |
| 1246 | std::unique_ptr<Configuration> configuration = |
| 1247 | parseConfiguration(element); |
| 1248 | EXPECT_EQ(configuration->getVolts().has_value(), true); |
| 1249 | EXPECT_EQ(configuration->getVolts().value(), 1.05); |
| 1250 | EXPECT_EQ(configuration->getActions().size(), 1); |
| 1251 | } |
| 1252 | |
| 1253 | // Test where fails: volts value is invalid |
| 1254 | try |
| 1255 | { |
| 1256 | const json element = R"( |
| 1257 | { |
| 1258 | "volts": "foo", |
| 1259 | "actions": [ |
| 1260 | { |
| 1261 | "pmbus_write_vout_command": { |
| 1262 | "format": "linear" |
| 1263 | } |
| 1264 | } |
| 1265 | ] |
| 1266 | } |
| 1267 | )"_json; |
| 1268 | parseConfiguration(element); |
| 1269 | ADD_FAILURE() << "Should not have reached this line."; |
| 1270 | } |
| 1271 | catch (const std::invalid_argument& e) |
| 1272 | { |
| 1273 | EXPECT_STREQ(e.what(), "Element is not a number"); |
| 1274 | } |
| 1275 | |
| 1276 | // Test where fails: actions object is invalid |
| 1277 | try |
| 1278 | { |
| 1279 | const json element = R"( |
| 1280 | { |
| 1281 | "volts": 1.03, |
| 1282 | "actions": 1 |
| 1283 | } |
| 1284 | )"_json; |
| 1285 | parseConfiguration(element); |
| 1286 | ADD_FAILURE() << "Should not have reached this line."; |
| 1287 | } |
| 1288 | catch (const std::invalid_argument& e) |
| 1289 | { |
| 1290 | EXPECT_STREQ(e.what(), "Element is not an array"); |
| 1291 | } |
| 1292 | |
| 1293 | // Test where fails: rule_id value is invalid |
| 1294 | try |
| 1295 | { |
| 1296 | const json element = R"( |
| 1297 | { |
| 1298 | "volts": 1.05, |
| 1299 | "rule_id": 1 |
| 1300 | } |
| 1301 | )"_json; |
| 1302 | parseConfiguration(element); |
| 1303 | ADD_FAILURE() << "Should not have reached this line."; |
| 1304 | } |
| 1305 | catch (const std::invalid_argument& e) |
| 1306 | { |
| 1307 | EXPECT_STREQ(e.what(), "Element is not a string"); |
| 1308 | } |
| 1309 | |
| 1310 | // Test where fails: Required actions or rule_id property not specified |
| 1311 | try |
| 1312 | { |
| 1313 | const json element = R"( |
| 1314 | { |
| 1315 | "volts": 1.03 |
| 1316 | } |
| 1317 | )"_json; |
| 1318 | parseConfiguration(element); |
| 1319 | ADD_FAILURE() << "Should not have reached this line."; |
| 1320 | } |
| 1321 | catch (const std::invalid_argument& e) |
| 1322 | { |
| 1323 | EXPECT_STREQ(e.what(), "Invalid property combination: Must contain " |
| 1324 | "either rule_id or actions"); |
| 1325 | } |
| 1326 | |
| 1327 | // Test where fails: Required actions or rule_id property both specified |
| 1328 | try |
| 1329 | { |
| 1330 | const json element = R"( |
| 1331 | { |
| 1332 | "volts": 1.03, |
| 1333 | "rule_id": "set_voltage_rule", |
| 1334 | "actions": [ |
| 1335 | { |
| 1336 | "pmbus_write_vout_command": { |
| 1337 | "format": "linear" |
| 1338 | } |
| 1339 | } |
| 1340 | ] |
| 1341 | } |
| 1342 | )"_json; |
| 1343 | parseConfiguration(element); |
| 1344 | ADD_FAILURE() << "Should not have reached this line."; |
| 1345 | } |
| 1346 | catch (const std::invalid_argument& e) |
| 1347 | { |
| 1348 | EXPECT_STREQ(e.what(), "Invalid property combination: Must contain " |
| 1349 | "either rule_id or actions"); |
| 1350 | } |
| 1351 | |
| 1352 | // Test where fails: Element is not an object |
| 1353 | try |
| 1354 | { |
| 1355 | const json element = R"( [ "0xFF", "0x01" ] )"_json; |
| 1356 | parseConfiguration(element); |
| 1357 | ADD_FAILURE() << "Should not have reached this line."; |
| 1358 | } |
| 1359 | catch (const std::invalid_argument& e) |
| 1360 | { |
| 1361 | EXPECT_STREQ(e.what(), "Element is not an object"); |
| 1362 | } |
| 1363 | |
| 1364 | // Test where fails: Invalid property specified |
| 1365 | try |
| 1366 | { |
| 1367 | const json element = R"( |
| 1368 | { |
| 1369 | "volts": 1.03, |
| 1370 | "rule_id": "set_voltage_rule", |
| 1371 | "foo": 1 |
| 1372 | } |
| 1373 | )"_json; |
| 1374 | parseConfiguration(element); |
| 1375 | ADD_FAILURE() << "Should not have reached this line."; |
| 1376 | } |
| 1377 | catch (const std::invalid_argument& e) |
| 1378 | { |
| 1379 | EXPECT_STREQ(e.what(), "Element contains an invalid property"); |
| 1380 | } |
| 1381 | } |
| 1382 | |
Bob King | 9c36c5f | 2020-04-06 11:34:09 +0800 | [diff] [blame] | 1383 | TEST(ConfigFileParserTests, ParseDevice) |
| 1384 | { |
| 1385 | // Test where works: Only required properties specified |
| 1386 | { |
| 1387 | const json element = R"( |
| 1388 | { |
| 1389 | "id": "vdd_regulator", |
| 1390 | "is_regulator": true, |
| 1391 | "fru": "/system/chassis/motherboard/regulator2", |
| 1392 | "i2c_interface": { "bus": 1, "address": "0x70" } |
| 1393 | } |
| 1394 | )"_json; |
| 1395 | std::unique_ptr<Device> device = parseDevice(element); |
| 1396 | EXPECT_EQ(device->getID(), "vdd_regulator"); |
| 1397 | EXPECT_EQ(device->isRegulator(), true); |
| 1398 | EXPECT_EQ(device->getFRU(), "/system/chassis/motherboard/regulator2"); |
| 1399 | EXPECT_NE(&(device->getI2CInterface()), nullptr); |
| 1400 | EXPECT_EQ(device->getPresenceDetection(), nullptr); |
| 1401 | EXPECT_EQ(device->getConfiguration(), nullptr); |
| 1402 | EXPECT_EQ(device->getRails().size(), 0); |
| 1403 | } |
| 1404 | |
| 1405 | // Test where works: All properties specified |
Bob King | 33e7eaa | 2020-04-01 18:09:34 +0800 | [diff] [blame] | 1406 | { |
Bob King | 33e7eaa | 2020-04-01 18:09:34 +0800 | [diff] [blame] | 1407 | const json element = R"( |
| 1408 | { |
| 1409 | "id": "vdd_regulator", |
| 1410 | "is_regulator": true, |
| 1411 | "fru": "/system/chassis/motherboard/regulator2", |
| 1412 | "i2c_interface": |
| 1413 | { |
| 1414 | "bus": 1, |
| 1415 | "address": "0x70" |
| 1416 | }, |
| 1417 | "configuration": |
| 1418 | { |
| 1419 | "rule_id": "configure_ir35221_rule" |
Bob King | a2f2a0d | 2020-04-09 13:32:14 +0800 | [diff] [blame] | 1420 | }, |
Bob King | 2aafb1c | 2020-04-16 15:24:32 +0800 | [diff] [blame] | 1421 | "presence_detection": |
| 1422 | { |
| 1423 | "rule_id": "is_foobar_backplane_installed_rule" |
| 1424 | }, |
Bob King | a2f2a0d | 2020-04-09 13:32:14 +0800 | [diff] [blame] | 1425 | "rails": |
| 1426 | [ |
| 1427 | { |
| 1428 | "id": "vdd" |
| 1429 | } |
| 1430 | ] |
Bob King | 33e7eaa | 2020-04-01 18:09:34 +0800 | [diff] [blame] | 1431 | } |
| 1432 | )"_json; |
| 1433 | std::unique_ptr<Device> device = parseDevice(element); |
| 1434 | EXPECT_EQ(device->getID(), "vdd_regulator"); |
| 1435 | EXPECT_EQ(device->isRegulator(), true); |
| 1436 | EXPECT_EQ(device->getFRU(), "/system/chassis/motherboard/regulator2"); |
| 1437 | EXPECT_NE(&(device->getI2CInterface()), nullptr); |
Bob King | 2aafb1c | 2020-04-16 15:24:32 +0800 | [diff] [blame] | 1438 | EXPECT_NE(device->getPresenceDetection(), nullptr); |
Bob King | 33e7eaa | 2020-04-01 18:09:34 +0800 | [diff] [blame] | 1439 | EXPECT_NE(device->getConfiguration(), nullptr); |
Bob King | a2f2a0d | 2020-04-09 13:32:14 +0800 | [diff] [blame] | 1440 | EXPECT_EQ(device->getRails().size(), 1); |
| 1441 | } |
| 1442 | |
| 1443 | // Test where fails: rails property exists and is_regulator is false |
| 1444 | try |
| 1445 | { |
| 1446 | const json element = R"( |
| 1447 | { |
| 1448 | "id": "vdd_regulator", |
| 1449 | "is_regulator": false, |
| 1450 | "fru": "/system/chassis/motherboard/regulator2", |
| 1451 | "i2c_interface": |
| 1452 | { |
| 1453 | "bus": 1, |
| 1454 | "address": "0x70" |
| 1455 | }, |
| 1456 | "configuration": |
| 1457 | { |
| 1458 | "rule_id": "configure_ir35221_rule" |
| 1459 | }, |
| 1460 | "rails": |
| 1461 | [ |
| 1462 | { |
| 1463 | "id": "vdd" |
| 1464 | } |
| 1465 | ] |
| 1466 | } |
| 1467 | )"_json; |
| 1468 | parseDevice(element); |
| 1469 | ADD_FAILURE() << "Should not have reached this line."; |
| 1470 | } |
| 1471 | catch (const std::invalid_argument& e) |
| 1472 | { |
| 1473 | EXPECT_STREQ(e.what(), |
| 1474 | "Invalid rails property when is_regulator is false"); |
Bob King | 33e7eaa | 2020-04-01 18:09:34 +0800 | [diff] [blame] | 1475 | } |
Bob King | 9c36c5f | 2020-04-06 11:34:09 +0800 | [diff] [blame] | 1476 | |
| 1477 | // Test where fails: id value is invalid |
| 1478 | try |
| 1479 | { |
| 1480 | const json element = R"( |
| 1481 | { |
| 1482 | "id": 3, |
| 1483 | "is_regulator": true, |
| 1484 | "fru": "/system/chassis/motherboard/regulator2", |
| 1485 | "i2c_interface": |
| 1486 | { |
| 1487 | "bus": 1, |
| 1488 | "address": "0x70" |
| 1489 | } |
| 1490 | } |
| 1491 | )"_json; |
| 1492 | parseDevice(element); |
| 1493 | ADD_FAILURE() << "Should not have reached this line."; |
| 1494 | } |
| 1495 | catch (const std::invalid_argument& e) |
| 1496 | { |
| 1497 | EXPECT_STREQ(e.what(), "Element is not a string"); |
| 1498 | } |
| 1499 | |
| 1500 | // Test where fails: is_regulator value is invalid |
| 1501 | try |
| 1502 | { |
| 1503 | const json element = R"( |
| 1504 | { |
| 1505 | "id": "vdd_regulator", |
| 1506 | "is_regulator": 3, |
| 1507 | "fru": "/system/chassis/motherboard/regulator2", |
| 1508 | "i2c_interface": |
| 1509 | { |
| 1510 | "bus": 1, |
| 1511 | "address": "0x70" |
| 1512 | } |
| 1513 | } |
| 1514 | )"_json; |
| 1515 | parseDevice(element); |
| 1516 | ADD_FAILURE() << "Should not have reached this line."; |
| 1517 | } |
| 1518 | catch (const std::invalid_argument& e) |
| 1519 | { |
| 1520 | EXPECT_STREQ(e.what(), "Element is not a boolean"); |
| 1521 | } |
| 1522 | |
| 1523 | // Test where fails: fru value is invalid |
| 1524 | try |
| 1525 | { |
| 1526 | const json element = R"( |
| 1527 | { |
| 1528 | "id": "vdd_regulator", |
| 1529 | "is_regulator": true, |
| 1530 | "fru": 2, |
| 1531 | "i2c_interface": |
| 1532 | { |
| 1533 | "bus": 1, |
| 1534 | "address": "0x70" |
| 1535 | } |
| 1536 | } |
| 1537 | )"_json; |
| 1538 | parseDevice(element); |
| 1539 | ADD_FAILURE() << "Should not have reached this line."; |
| 1540 | } |
| 1541 | catch (const std::invalid_argument& e) |
| 1542 | { |
| 1543 | EXPECT_STREQ(e.what(), "Element is not a string"); |
| 1544 | } |
| 1545 | |
| 1546 | // Test where fails: i2c_interface value is invalid |
| 1547 | try |
| 1548 | { |
| 1549 | const json element = R"( |
| 1550 | { |
| 1551 | "id": "vdd_regulator", |
| 1552 | "is_regulator": true, |
| 1553 | "fru": "/system/chassis/motherboard/regulator2", |
| 1554 | "i2c_interface": 3 |
| 1555 | } |
| 1556 | )"_json; |
| 1557 | parseDevice(element); |
| 1558 | ADD_FAILURE() << "Should not have reached this line."; |
| 1559 | } |
| 1560 | catch (const std::invalid_argument& e) |
| 1561 | { |
| 1562 | EXPECT_STREQ(e.what(), "Element is not an object"); |
| 1563 | } |
| 1564 | |
| 1565 | // Test where fails: Required id property not specified |
| 1566 | try |
| 1567 | { |
| 1568 | const json element = R"( |
| 1569 | { |
| 1570 | "is_regulator": true, |
| 1571 | "fru": "/system/chassis/motherboard/regulator2", |
| 1572 | "i2c_interface": |
| 1573 | { |
| 1574 | "bus": 1, |
| 1575 | "address": "0x70" |
| 1576 | } |
| 1577 | } |
| 1578 | )"_json; |
| 1579 | parseDevice(element); |
| 1580 | ADD_FAILURE() << "Should not have reached this line."; |
| 1581 | } |
| 1582 | catch (const std::invalid_argument& e) |
| 1583 | { |
| 1584 | EXPECT_STREQ(e.what(), "Required property missing: id"); |
| 1585 | } |
| 1586 | |
| 1587 | // Test where fails: Required is_regulator property not specified |
| 1588 | try |
| 1589 | { |
| 1590 | const json element = R"( |
| 1591 | { |
| 1592 | "id": "vdd_regulator", |
| 1593 | "fru": "/system/chassis/motherboard/regulator2", |
| 1594 | "i2c_interface": |
| 1595 | { |
| 1596 | "bus": 1, |
| 1597 | "address": "0x70" |
| 1598 | } |
| 1599 | } |
| 1600 | )"_json; |
| 1601 | parseDevice(element); |
| 1602 | ADD_FAILURE() << "Should not have reached this line."; |
| 1603 | } |
| 1604 | catch (const std::invalid_argument& e) |
| 1605 | { |
| 1606 | EXPECT_STREQ(e.what(), "Required property missing: is_regulator"); |
| 1607 | } |
| 1608 | |
| 1609 | // Test where fails: Required fru property not specified |
| 1610 | try |
| 1611 | { |
| 1612 | const json element = R"( |
| 1613 | { |
| 1614 | "id": "vdd_regulator", |
| 1615 | "is_regulator": true, |
| 1616 | "i2c_interface": |
| 1617 | { |
| 1618 | "bus": 1, |
| 1619 | "address": "0x70" |
| 1620 | } |
| 1621 | } |
| 1622 | )"_json; |
| 1623 | parseDevice(element); |
| 1624 | ADD_FAILURE() << "Should not have reached this line."; |
| 1625 | } |
| 1626 | catch (const std::invalid_argument& e) |
| 1627 | { |
| 1628 | EXPECT_STREQ(e.what(), "Required property missing: fru"); |
| 1629 | } |
| 1630 | |
| 1631 | // Test where fails: Required i2c_interface property not specified |
| 1632 | try |
| 1633 | { |
| 1634 | const json element = R"( |
| 1635 | { |
| 1636 | "id": "vdd_regulator", |
| 1637 | "is_regulator": true, |
| 1638 | "fru": "/system/chassis/motherboard/regulator2" |
| 1639 | } |
| 1640 | )"_json; |
| 1641 | parseDevice(element); |
| 1642 | ADD_FAILURE() << "Should not have reached this line."; |
| 1643 | } |
| 1644 | catch (const std::invalid_argument& e) |
| 1645 | { |
| 1646 | EXPECT_STREQ(e.what(), "Required property missing: i2c_interface"); |
| 1647 | } |
| 1648 | |
| 1649 | // Test where fails: Element is not an object |
| 1650 | try |
| 1651 | { |
| 1652 | const json element = R"( [ "0xFF", "0x01" ] )"_json; |
| 1653 | parseDevice(element); |
| 1654 | ADD_FAILURE() << "Should not have reached this line."; |
| 1655 | } |
| 1656 | catch (const std::invalid_argument& e) |
| 1657 | { |
| 1658 | EXPECT_STREQ(e.what(), "Element is not an object"); |
| 1659 | } |
| 1660 | |
| 1661 | // Test where fails: Invalid property specified |
| 1662 | try |
| 1663 | { |
| 1664 | const json element = R"( |
| 1665 | { |
| 1666 | "id": "vdd_regulator", |
| 1667 | "is_regulator": true, |
| 1668 | "fru": "/system/chassis/motherboard/regulator2", |
| 1669 | "i2c_interface": { "bus": 1, "address": "0x70" }, |
| 1670 | "foo" : true |
| 1671 | } |
| 1672 | )"_json; |
| 1673 | parseDevice(element); |
| 1674 | ADD_FAILURE() << "Should not have reached this line."; |
| 1675 | } |
| 1676 | catch (const std::invalid_argument& e) |
| 1677 | { |
| 1678 | EXPECT_STREQ(e.what(), "Element contains an invalid property"); |
| 1679 | } |
| 1680 | } |
| 1681 | |
| 1682 | TEST(ConfigFileParserTests, ParseDeviceArray) |
| 1683 | { |
| 1684 | // Test where works |
| 1685 | { |
| 1686 | const json element = R"( |
| 1687 | [ |
| 1688 | { |
| 1689 | "id": "vdd_regulator", |
| 1690 | "is_regulator": true, |
| 1691 | "fru": "/system/chassis/motherboard/regulator2", |
| 1692 | "i2c_interface": { "bus": 1, "address": "0x70" } |
| 1693 | }, |
| 1694 | { |
| 1695 | "id": "vio_regulator", |
| 1696 | "is_regulator": true, |
| 1697 | "fru": "/system/chassis/motherboard/regulator2", |
| 1698 | "i2c_interface": { "bus": 1, "address": "0x71" } |
| 1699 | } |
| 1700 | ] |
| 1701 | )"_json; |
| 1702 | std::vector<std::unique_ptr<Device>> devices = |
| 1703 | parseDeviceArray(element); |
| 1704 | EXPECT_EQ(devices.size(), 2); |
| 1705 | EXPECT_EQ(devices[0]->getID(), "vdd_regulator"); |
| 1706 | EXPECT_EQ(devices[1]->getID(), "vio_regulator"); |
| 1707 | } |
| 1708 | |
| 1709 | // Test where fails: Element is not an array |
| 1710 | try |
| 1711 | { |
| 1712 | const json element = R"( |
| 1713 | { |
| 1714 | "foo": "bar" |
| 1715 | } |
| 1716 | )"_json; |
| 1717 | parseDeviceArray(element); |
| 1718 | ADD_FAILURE() << "Should not have reached this line."; |
| 1719 | } |
| 1720 | catch (const std::invalid_argument& e) |
| 1721 | { |
| 1722 | EXPECT_STREQ(e.what(), "Element is not an array"); |
| 1723 | } |
| 1724 | } |
| 1725 | |
Shawn McCarney | 0e8c68a | 2020-03-27 01:44:48 -0500 | [diff] [blame] | 1726 | TEST(ConfigFileParserTests, ParseDouble) |
| 1727 | { |
| 1728 | // Test where works: floating point value |
| 1729 | { |
| 1730 | const json element = R"( 1.03 )"_json; |
| 1731 | double value = parseDouble(element); |
| 1732 | EXPECT_EQ(value, 1.03); |
| 1733 | } |
| 1734 | |
| 1735 | // Test where works: integer value |
| 1736 | { |
| 1737 | const json element = R"( 24 )"_json; |
| 1738 | double value = parseDouble(element); |
| 1739 | EXPECT_EQ(value, 24.0); |
| 1740 | } |
| 1741 | |
| 1742 | // Test where fails: Element is not a number |
| 1743 | try |
| 1744 | { |
| 1745 | const json element = R"( true )"_json; |
| 1746 | parseDouble(element); |
| 1747 | ADD_FAILURE() << "Should not have reached this line."; |
| 1748 | } |
| 1749 | catch (const std::invalid_argument& e) |
| 1750 | { |
| 1751 | EXPECT_STREQ(e.what(), "Element is not a number"); |
| 1752 | } |
| 1753 | } |
| 1754 | |
Bob King | bafcb86 | 2020-03-31 16:39:00 +0800 | [diff] [blame] | 1755 | TEST(ConfigFileParserTests, ParseHexByte) |
| 1756 | { |
| 1757 | // Test where works: "0xFF" |
| 1758 | { |
| 1759 | const json element = R"( "0xFF" )"_json; |
| 1760 | uint8_t value = parseHexByte(element); |
| 1761 | EXPECT_EQ(value, 0xFF); |
| 1762 | } |
| 1763 | |
| 1764 | // Test where works: "0xff" |
| 1765 | { |
| 1766 | const json element = R"( "0xff" )"_json; |
| 1767 | uint8_t value = parseHexByte(element); |
| 1768 | EXPECT_EQ(value, 0xff); |
| 1769 | } |
| 1770 | |
| 1771 | // Test where works: "0xf" |
| 1772 | { |
| 1773 | const json element = R"( "0xf" )"_json; |
| 1774 | uint8_t value = parseHexByte(element); |
| 1775 | EXPECT_EQ(value, 0xf); |
| 1776 | } |
| 1777 | |
| 1778 | // Test where fails: "0xfff" |
| 1779 | try |
| 1780 | { |
| 1781 | const json element = R"( "0xfff" )"_json; |
| 1782 | parseHexByte(element); |
| 1783 | ADD_FAILURE() << "Should not have reached this line."; |
| 1784 | } |
| 1785 | catch (const std::invalid_argument& e) |
| 1786 | { |
| 1787 | EXPECT_STREQ(e.what(), "Element is not hexadecimal string"); |
| 1788 | } |
| 1789 | |
| 1790 | // Test where fails: "0xAG" |
| 1791 | try |
| 1792 | { |
| 1793 | const json element = R"( "0xAG" )"_json; |
| 1794 | parseHexByte(element); |
| 1795 | ADD_FAILURE() << "Should not have reached this line."; |
| 1796 | } |
| 1797 | catch (const std::invalid_argument& e) |
| 1798 | { |
| 1799 | EXPECT_STREQ(e.what(), "Element is not hexadecimal string"); |
| 1800 | } |
| 1801 | |
| 1802 | // Test where fails: "ff" |
| 1803 | try |
| 1804 | { |
| 1805 | const json element = R"( "ff" )"_json; |
| 1806 | parseHexByte(element); |
| 1807 | ADD_FAILURE() << "Should not have reached this line."; |
| 1808 | } |
| 1809 | catch (const std::invalid_argument& e) |
| 1810 | { |
| 1811 | EXPECT_STREQ(e.what(), "Element is not hexadecimal string"); |
| 1812 | } |
| 1813 | |
| 1814 | // Test where fails: "" |
| 1815 | try |
| 1816 | { |
| 1817 | const json element = ""; |
| 1818 | parseHexByte(element); |
| 1819 | ADD_FAILURE() << "Should not have reached this line."; |
| 1820 | } |
| 1821 | catch (const std::invalid_argument& e) |
| 1822 | { |
| 1823 | EXPECT_STREQ(e.what(), "Element is not hexadecimal string"); |
| 1824 | } |
| 1825 | |
| 1826 | // Test where fails: "f" |
| 1827 | try |
| 1828 | { |
| 1829 | const json element = R"( "f" )"_json; |
| 1830 | parseHexByte(element); |
| 1831 | ADD_FAILURE() << "Should not have reached this line."; |
| 1832 | } |
| 1833 | catch (const std::invalid_argument& e) |
| 1834 | { |
| 1835 | EXPECT_STREQ(e.what(), "Element is not hexadecimal string"); |
| 1836 | } |
| 1837 | |
| 1838 | // Test where fails: "0x" |
| 1839 | try |
| 1840 | { |
| 1841 | const json element = R"( "0x" )"_json; |
| 1842 | parseHexByte(element); |
| 1843 | ADD_FAILURE() << "Should not have reached this line."; |
| 1844 | } |
| 1845 | catch (const std::invalid_argument& e) |
| 1846 | { |
| 1847 | EXPECT_STREQ(e.what(), "Element is not hexadecimal string"); |
| 1848 | } |
| 1849 | |
| 1850 | // Test where fails: "0Xff" |
| 1851 | try |
| 1852 | { |
| 1853 | const json element = R"( "0XFF" )"_json; |
| 1854 | parseHexByte(element); |
| 1855 | ADD_FAILURE() << "Should not have reached this line."; |
| 1856 | } |
| 1857 | catch (const std::invalid_argument& e) |
| 1858 | { |
| 1859 | EXPECT_STREQ(e.what(), "Element is not hexadecimal string"); |
| 1860 | } |
| 1861 | } |
| 1862 | |
| 1863 | TEST(ConfigFileParserTests, ParseHexByteArray) |
| 1864 | { |
| 1865 | // Test where works |
| 1866 | { |
| 1867 | const json element = R"( [ "0xCC", "0xFF" ] )"_json; |
| 1868 | std::vector<uint8_t> hexBytes = parseHexByteArray(element); |
| 1869 | std::vector<uint8_t> expected = {0xcc, 0xff}; |
| 1870 | EXPECT_EQ(hexBytes, expected); |
| 1871 | } |
| 1872 | |
| 1873 | // Test where fails: Element is not an array |
| 1874 | try |
| 1875 | { |
| 1876 | const json element = 0; |
| 1877 | parseHexByteArray(element); |
| 1878 | ADD_FAILURE() << "Should not have reached this line."; |
| 1879 | } |
| 1880 | catch (const std::invalid_argument& e) |
| 1881 | { |
| 1882 | EXPECT_STREQ(e.what(), "Element is not an array"); |
| 1883 | } |
| 1884 | } |
| 1885 | |
Bob King | f09bfe0 | 2020-04-13 17:21:15 +0800 | [diff] [blame] | 1886 | TEST(ConfigFileParserTests, ParseI2CCompareBit) |
| 1887 | { |
| 1888 | // Test where works |
| 1889 | { |
| 1890 | const json element = R"( |
| 1891 | { |
| 1892 | "register": "0xA0", |
| 1893 | "position": 3, |
| 1894 | "value": 0 |
| 1895 | } |
| 1896 | )"_json; |
| 1897 | std::unique_ptr<I2CCompareBitAction> action = |
| 1898 | parseI2CCompareBit(element); |
| 1899 | EXPECT_EQ(action->getRegister(), 0xA0); |
| 1900 | EXPECT_EQ(action->getPosition(), 3); |
| 1901 | EXPECT_EQ(action->getValue(), 0); |
| 1902 | } |
| 1903 | |
| 1904 | // Test where fails: Invalid property specified |
| 1905 | try |
| 1906 | { |
| 1907 | const json element = R"( |
| 1908 | { |
| 1909 | "register": "0xA0", |
| 1910 | "position": 3, |
| 1911 | "value": 0, |
| 1912 | "foo": 3 |
| 1913 | } |
| 1914 | )"_json; |
| 1915 | parseI2CCompareBit(element); |
| 1916 | ADD_FAILURE() << "Should not have reached this line."; |
| 1917 | } |
| 1918 | catch (const std::invalid_argument& e) |
| 1919 | { |
| 1920 | EXPECT_STREQ(e.what(), "Element contains an invalid property"); |
| 1921 | } |
| 1922 | |
| 1923 | // Test where fails: Element is not an object |
| 1924 | try |
| 1925 | { |
| 1926 | const json element = R"( [ "0xFF", "0x01" ] )"_json; |
| 1927 | parseI2CCompareBit(element); |
| 1928 | ADD_FAILURE() << "Should not have reached this line."; |
| 1929 | } |
| 1930 | catch (const std::invalid_argument& e) |
| 1931 | { |
| 1932 | EXPECT_STREQ(e.what(), "Element is not an object"); |
| 1933 | } |
| 1934 | |
| 1935 | // Test where fails: register value is invalid |
| 1936 | try |
| 1937 | { |
| 1938 | const json element = R"( |
| 1939 | { |
| 1940 | "register": "0xAG", |
| 1941 | "position": 3, |
| 1942 | "value": 0 |
| 1943 | } |
| 1944 | )"_json; |
| 1945 | parseI2CCompareBit(element); |
| 1946 | ADD_FAILURE() << "Should not have reached this line."; |
| 1947 | } |
| 1948 | catch (const std::invalid_argument& e) |
| 1949 | { |
| 1950 | EXPECT_STREQ(e.what(), "Element is not hexadecimal string"); |
| 1951 | } |
| 1952 | |
| 1953 | // Test where fails: position value is invalid |
| 1954 | try |
| 1955 | { |
| 1956 | const json element = R"( |
| 1957 | { |
| 1958 | "register": "0xA0", |
| 1959 | "position": 8, |
| 1960 | "value": 0 |
| 1961 | } |
| 1962 | )"_json; |
| 1963 | parseI2CCompareBit(element); |
| 1964 | ADD_FAILURE() << "Should not have reached this line."; |
| 1965 | } |
| 1966 | catch (const std::invalid_argument& e) |
| 1967 | { |
| 1968 | EXPECT_STREQ(e.what(), "Element is not a bit position"); |
| 1969 | } |
| 1970 | |
| 1971 | // Test where fails: value value is invalid |
| 1972 | try |
| 1973 | { |
| 1974 | const json element = R"( |
| 1975 | { |
| 1976 | "register": "0xA0", |
| 1977 | "position": 3, |
| 1978 | "value": 2 |
| 1979 | } |
| 1980 | )"_json; |
| 1981 | parseI2CCompareBit(element); |
| 1982 | ADD_FAILURE() << "Should not have reached this line."; |
| 1983 | } |
| 1984 | catch (const std::invalid_argument& e) |
| 1985 | { |
| 1986 | EXPECT_STREQ(e.what(), "Element is not a bit value"); |
| 1987 | } |
| 1988 | |
| 1989 | // Test where fails: Required register property not specified |
| 1990 | try |
| 1991 | { |
| 1992 | const json element = R"( |
| 1993 | { |
| 1994 | "position": 3, |
| 1995 | "value": 0 |
| 1996 | } |
| 1997 | )"_json; |
| 1998 | parseI2CCompareBit(element); |
| 1999 | ADD_FAILURE() << "Should not have reached this line."; |
| 2000 | } |
| 2001 | catch (const std::invalid_argument& e) |
| 2002 | { |
| 2003 | EXPECT_STREQ(e.what(), "Required property missing: register"); |
| 2004 | } |
| 2005 | |
| 2006 | // Test where fails: Required position property not specified |
| 2007 | try |
| 2008 | { |
| 2009 | const json element = R"( |
| 2010 | { |
| 2011 | "register": "0xA0", |
| 2012 | "value": 0 |
| 2013 | } |
| 2014 | )"_json; |
| 2015 | parseI2CCompareBit(element); |
| 2016 | ADD_FAILURE() << "Should not have reached this line."; |
| 2017 | } |
| 2018 | catch (const std::invalid_argument& e) |
| 2019 | { |
| 2020 | EXPECT_STREQ(e.what(), "Required property missing: position"); |
| 2021 | } |
| 2022 | |
| 2023 | // Test where fails: Required value property not specified |
| 2024 | try |
| 2025 | { |
| 2026 | const json element = R"( |
| 2027 | { |
| 2028 | "register": "0xA0", |
| 2029 | "position": 3 |
| 2030 | } |
| 2031 | )"_json; |
| 2032 | parseI2CCompareBit(element); |
| 2033 | ADD_FAILURE() << "Should not have reached this line."; |
| 2034 | } |
| 2035 | catch (const std::invalid_argument& e) |
| 2036 | { |
| 2037 | EXPECT_STREQ(e.what(), "Required property missing: value"); |
| 2038 | } |
| 2039 | } |
| 2040 | |
| 2041 | TEST(ConfigFileParserTests, ParseI2CCompareByte) |
| 2042 | { |
| 2043 | // Test where works: Only required properties specified |
| 2044 | { |
| 2045 | const json element = R"( |
| 2046 | { |
| 2047 | "register": "0x0A", |
| 2048 | "value": "0xCC" |
| 2049 | } |
| 2050 | )"_json; |
| 2051 | std::unique_ptr<I2CCompareByteAction> action = |
| 2052 | parseI2CCompareByte(element); |
| 2053 | EXPECT_EQ(action->getRegister(), 0x0A); |
| 2054 | EXPECT_EQ(action->getValue(), 0xCC); |
| 2055 | EXPECT_EQ(action->getMask(), 0xFF); |
| 2056 | } |
| 2057 | |
| 2058 | // Test where works: All properties specified |
| 2059 | { |
| 2060 | const json element = R"( |
| 2061 | { |
| 2062 | "register": "0x0A", |
| 2063 | "value": "0xCC", |
| 2064 | "mask": "0xF7" |
| 2065 | } |
| 2066 | )"_json; |
| 2067 | std::unique_ptr<I2CCompareByteAction> action = |
| 2068 | parseI2CCompareByte(element); |
| 2069 | EXPECT_EQ(action->getRegister(), 0x0A); |
| 2070 | EXPECT_EQ(action->getValue(), 0xCC); |
| 2071 | EXPECT_EQ(action->getMask(), 0xF7); |
| 2072 | } |
| 2073 | |
| 2074 | // Test where fails: Element is not an object |
| 2075 | try |
| 2076 | { |
| 2077 | const json element = R"( [ "0xFF", "0x01" ] )"_json; |
| 2078 | parseI2CCompareByte(element); |
| 2079 | ADD_FAILURE() << "Should not have reached this line."; |
| 2080 | } |
| 2081 | catch (const std::invalid_argument& e) |
| 2082 | { |
| 2083 | EXPECT_STREQ(e.what(), "Element is not an object"); |
| 2084 | } |
| 2085 | |
| 2086 | // Test where fails: Invalid property specified |
| 2087 | try |
| 2088 | { |
| 2089 | const json element = R"( |
| 2090 | { |
| 2091 | "register": "0x0A", |
| 2092 | "value": "0xCC", |
| 2093 | "mask": "0xF7", |
| 2094 | "foo": 1 |
| 2095 | } |
| 2096 | )"_json; |
| 2097 | parseI2CCompareByte(element); |
| 2098 | ADD_FAILURE() << "Should not have reached this line."; |
| 2099 | } |
| 2100 | catch (const std::invalid_argument& e) |
| 2101 | { |
| 2102 | EXPECT_STREQ(e.what(), "Element contains an invalid property"); |
| 2103 | } |
| 2104 | |
| 2105 | // Test where fails: register value is invalid |
| 2106 | try |
| 2107 | { |
| 2108 | const json element = R"( |
| 2109 | { |
| 2110 | "register": "0x0Z", |
| 2111 | "value": "0xCC", |
| 2112 | "mask": "0xF7" |
| 2113 | } |
| 2114 | )"_json; |
| 2115 | parseI2CCompareByte(element); |
| 2116 | ADD_FAILURE() << "Should not have reached this line."; |
| 2117 | } |
| 2118 | catch (const std::invalid_argument& e) |
| 2119 | { |
| 2120 | EXPECT_STREQ(e.what(), "Element is not hexadecimal string"); |
| 2121 | } |
| 2122 | |
| 2123 | // Test where fails: value value is invalid |
| 2124 | try |
| 2125 | { |
| 2126 | const json element = R"( |
| 2127 | { |
| 2128 | "register": "0x0A", |
| 2129 | "value": "0xCCC", |
| 2130 | "mask": "0xF7" |
| 2131 | } |
| 2132 | )"_json; |
| 2133 | parseI2CCompareByte(element); |
| 2134 | ADD_FAILURE() << "Should not have reached this line."; |
| 2135 | } |
| 2136 | catch (const std::invalid_argument& e) |
| 2137 | { |
| 2138 | EXPECT_STREQ(e.what(), "Element is not hexadecimal string"); |
| 2139 | } |
| 2140 | |
| 2141 | // Test where fails: mask value is invalid |
| 2142 | try |
| 2143 | { |
| 2144 | const json element = R"( |
| 2145 | { |
| 2146 | "register": "0x0A", |
| 2147 | "value": "0xCC", |
| 2148 | "mask": "F7" |
| 2149 | } |
| 2150 | )"_json; |
| 2151 | parseI2CCompareByte(element); |
| 2152 | ADD_FAILURE() << "Should not have reached this line."; |
| 2153 | } |
| 2154 | catch (const std::invalid_argument& e) |
| 2155 | { |
| 2156 | EXPECT_STREQ(e.what(), "Element is not hexadecimal string"); |
| 2157 | } |
| 2158 | |
| 2159 | // Test where fails: Required register property not specified |
| 2160 | try |
| 2161 | { |
| 2162 | const json element = R"( |
| 2163 | { |
| 2164 | "value": "0xCC", |
| 2165 | "mask": "0xF7" |
| 2166 | } |
| 2167 | )"_json; |
| 2168 | parseI2CCompareByte(element); |
| 2169 | ADD_FAILURE() << "Should not have reached this line."; |
| 2170 | } |
| 2171 | catch (const std::invalid_argument& e) |
| 2172 | { |
| 2173 | EXPECT_STREQ(e.what(), "Required property missing: register"); |
| 2174 | } |
| 2175 | |
| 2176 | // Test where fails: Required value property not specified |
| 2177 | try |
| 2178 | { |
| 2179 | const json element = R"( |
| 2180 | { |
| 2181 | "register": "0x0A", |
| 2182 | "mask": "0xF7" |
| 2183 | } |
| 2184 | )"_json; |
| 2185 | parseI2CCompareByte(element); |
| 2186 | ADD_FAILURE() << "Should not have reached this line."; |
| 2187 | } |
| 2188 | catch (const std::invalid_argument& e) |
| 2189 | { |
| 2190 | EXPECT_STREQ(e.what(), "Required property missing: value"); |
| 2191 | } |
| 2192 | } |
| 2193 | |
| 2194 | TEST(ConfigFileParserTests, ParseI2CCompareBytes) |
| 2195 | { |
| 2196 | // Test where works: Only required properties specified |
| 2197 | { |
| 2198 | const json element = R"( |
| 2199 | { |
| 2200 | "register": "0x0A", |
| 2201 | "values": [ "0xCC", "0xFF" ] |
| 2202 | } |
| 2203 | )"_json; |
| 2204 | std::unique_ptr<I2CCompareBytesAction> action = |
| 2205 | parseI2CCompareBytes(element); |
| 2206 | EXPECT_EQ(action->getRegister(), 0x0A); |
| 2207 | EXPECT_EQ(action->getValues().size(), 2); |
| 2208 | EXPECT_EQ(action->getValues()[0], 0xCC); |
| 2209 | EXPECT_EQ(action->getValues()[1], 0xFF); |
| 2210 | EXPECT_EQ(action->getMasks().size(), 2); |
| 2211 | EXPECT_EQ(action->getMasks()[0], 0xFF); |
| 2212 | EXPECT_EQ(action->getMasks()[1], 0xFF); |
| 2213 | } |
| 2214 | |
| 2215 | // Test where works: All properties specified |
| 2216 | { |
| 2217 | const json element = R"( |
| 2218 | { |
| 2219 | "register": "0x0A", |
| 2220 | "values": [ "0xCC", "0xFF" ], |
| 2221 | "masks": [ "0x7F", "0x77" ] |
| 2222 | } |
| 2223 | )"_json; |
| 2224 | std::unique_ptr<I2CCompareBytesAction> action = |
| 2225 | parseI2CCompareBytes(element); |
| 2226 | EXPECT_EQ(action->getRegister(), 0x0A); |
| 2227 | EXPECT_EQ(action->getValues().size(), 2); |
| 2228 | EXPECT_EQ(action->getValues()[0], 0xCC); |
| 2229 | EXPECT_EQ(action->getValues()[1], 0xFF); |
| 2230 | EXPECT_EQ(action->getMasks().size(), 2); |
| 2231 | EXPECT_EQ(action->getMasks()[0], 0x7F); |
| 2232 | EXPECT_EQ(action->getMasks()[1], 0x77); |
| 2233 | } |
| 2234 | |
| 2235 | // Test where fails: Element is not an object |
| 2236 | try |
| 2237 | { |
| 2238 | const json element = R"( [ "0xFF", "0x01" ] )"_json; |
| 2239 | parseI2CCompareBytes(element); |
| 2240 | ADD_FAILURE() << "Should not have reached this line."; |
| 2241 | } |
| 2242 | catch (const std::invalid_argument& e) |
| 2243 | { |
| 2244 | EXPECT_STREQ(e.what(), "Element is not an object"); |
| 2245 | } |
| 2246 | |
| 2247 | // Test where fails: Invalid property specified |
| 2248 | try |
| 2249 | { |
| 2250 | const json element = R"( |
| 2251 | { |
| 2252 | "register": "0x0A", |
| 2253 | "values": [ "0xCC", "0xFF" ], |
| 2254 | "masks": [ "0x7F", "0x7F" ], |
| 2255 | "foo": 1 |
| 2256 | } |
| 2257 | )"_json; |
| 2258 | parseI2CCompareBytes(element); |
| 2259 | ADD_FAILURE() << "Should not have reached this line."; |
| 2260 | } |
| 2261 | catch (const std::invalid_argument& e) |
| 2262 | { |
| 2263 | EXPECT_STREQ(e.what(), "Element contains an invalid property"); |
| 2264 | } |
| 2265 | |
| 2266 | // Test where fails: register value is invalid |
| 2267 | try |
| 2268 | { |
| 2269 | const json element = R"( |
| 2270 | { |
| 2271 | "register": "0x0Z", |
| 2272 | "values": [ "0xCC", "0xFF" ], |
| 2273 | "masks": [ "0x7F", "0x7F" ] |
| 2274 | } |
| 2275 | )"_json; |
| 2276 | parseI2CCompareBytes(element); |
| 2277 | ADD_FAILURE() << "Should not have reached this line."; |
| 2278 | } |
| 2279 | catch (const std::invalid_argument& e) |
| 2280 | { |
| 2281 | EXPECT_STREQ(e.what(), "Element is not hexadecimal string"); |
| 2282 | } |
| 2283 | |
| 2284 | // Test where fails: values value is invalid |
| 2285 | try |
| 2286 | { |
| 2287 | const json element = R"( |
| 2288 | { |
| 2289 | "register": "0x0A", |
| 2290 | "values": [ "0xCCC", "0xFF" ], |
| 2291 | "masks": [ "0x7F", "0x7F" ] |
| 2292 | } |
| 2293 | )"_json; |
| 2294 | parseI2CCompareBytes(element); |
| 2295 | ADD_FAILURE() << "Should not have reached this line."; |
| 2296 | } |
| 2297 | catch (const std::invalid_argument& e) |
| 2298 | { |
| 2299 | EXPECT_STREQ(e.what(), "Element is not hexadecimal string"); |
| 2300 | } |
| 2301 | |
| 2302 | // Test where fails: masks value is invalid |
| 2303 | try |
| 2304 | { |
| 2305 | const json element = R"( |
| 2306 | { |
| 2307 | "register": "0x0A", |
| 2308 | "values": [ "0xCC", "0xFF" ], |
| 2309 | "masks": [ "F", "0x7F" ] |
| 2310 | } |
| 2311 | )"_json; |
| 2312 | parseI2CCompareBytes(element); |
| 2313 | ADD_FAILURE() << "Should not have reached this line."; |
| 2314 | } |
| 2315 | catch (const std::invalid_argument& e) |
| 2316 | { |
| 2317 | EXPECT_STREQ(e.what(), "Element is not hexadecimal string"); |
| 2318 | } |
| 2319 | |
| 2320 | // Test where fails: number of elements in masks is invalid |
| 2321 | try |
| 2322 | { |
| 2323 | const json element = R"( |
| 2324 | { |
| 2325 | "register": "0x0A", |
| 2326 | "values": [ "0xCC", "0xFF" ], |
| 2327 | "masks": [ "0x7F" ] |
| 2328 | } |
| 2329 | )"_json; |
| 2330 | parseI2CCompareBytes(element); |
| 2331 | ADD_FAILURE() << "Should not have reached this line."; |
| 2332 | } |
| 2333 | catch (const std::invalid_argument& e) |
| 2334 | { |
| 2335 | EXPECT_STREQ(e.what(), "Invalid number of elements in masks"); |
| 2336 | } |
| 2337 | |
| 2338 | // Test where fails: Required register property not specified |
| 2339 | try |
| 2340 | { |
| 2341 | const json element = R"( |
| 2342 | { |
| 2343 | "values": [ "0xCC", "0xFF" ] |
| 2344 | } |
| 2345 | )"_json; |
| 2346 | parseI2CCompareBytes(element); |
| 2347 | ADD_FAILURE() << "Should not have reached this line."; |
| 2348 | } |
| 2349 | catch (const std::invalid_argument& e) |
| 2350 | { |
| 2351 | EXPECT_STREQ(e.what(), "Required property missing: register"); |
| 2352 | } |
| 2353 | |
| 2354 | // Test where fails: Required values property not specified |
| 2355 | try |
| 2356 | { |
| 2357 | const json element = R"( |
| 2358 | { |
| 2359 | "register": "0x0A" |
| 2360 | } |
| 2361 | )"_json; |
| 2362 | parseI2CCompareBytes(element); |
| 2363 | ADD_FAILURE() << "Should not have reached this line."; |
| 2364 | } |
| 2365 | catch (const std::invalid_argument& e) |
| 2366 | { |
| 2367 | EXPECT_STREQ(e.what(), "Required property missing: values"); |
| 2368 | } |
| 2369 | } |
| 2370 | |
Bob King | f617f89 | 2020-03-30 19:03:35 +0800 | [diff] [blame] | 2371 | TEST(ConfigFileParserTests, ParseI2CWriteBit) |
| 2372 | { |
| 2373 | // Test where works |
| 2374 | { |
| 2375 | const json element = R"( |
| 2376 | { |
| 2377 | "register": "0xA0", |
| 2378 | "position": 3, |
| 2379 | "value": 0 |
| 2380 | } |
| 2381 | )"_json; |
| 2382 | std::unique_ptr<I2CWriteBitAction> action = parseI2CWriteBit(element); |
| 2383 | EXPECT_EQ(action->getRegister(), 0xA0); |
| 2384 | EXPECT_EQ(action->getPosition(), 3); |
| 2385 | EXPECT_EQ(action->getValue(), 0); |
| 2386 | } |
| 2387 | |
| 2388 | // Test where fails: Invalid property specified |
| 2389 | try |
| 2390 | { |
| 2391 | const json element = R"( |
| 2392 | { |
| 2393 | "register": "0xA0", |
| 2394 | "position": 3, |
| 2395 | "value": 0, |
| 2396 | "foo": 3 |
| 2397 | } |
| 2398 | )"_json; |
| 2399 | parseI2CWriteBit(element); |
| 2400 | ADD_FAILURE() << "Should not have reached this line."; |
| 2401 | } |
| 2402 | catch (const std::invalid_argument& e) |
| 2403 | { |
| 2404 | EXPECT_STREQ(e.what(), "Element contains an invalid property"); |
| 2405 | } |
| 2406 | |
| 2407 | // Test where fails: Element is not an object |
| 2408 | try |
| 2409 | { |
| 2410 | const json element = R"( [ "0xFF", "0x01" ] )"_json; |
| 2411 | parseI2CWriteBit(element); |
| 2412 | ADD_FAILURE() << "Should not have reached this line."; |
| 2413 | } |
| 2414 | catch (const std::invalid_argument& e) |
| 2415 | { |
| 2416 | EXPECT_STREQ(e.what(), "Element is not an object"); |
| 2417 | } |
| 2418 | |
| 2419 | // Test where fails: register value is invalid |
| 2420 | try |
| 2421 | { |
| 2422 | const json element = R"( |
| 2423 | { |
| 2424 | "register": "0xAG", |
| 2425 | "position": 3, |
| 2426 | "value": 0 |
| 2427 | } |
| 2428 | )"_json; |
| 2429 | parseI2CWriteBit(element); |
| 2430 | ADD_FAILURE() << "Should not have reached this line."; |
| 2431 | } |
| 2432 | catch (const std::invalid_argument& e) |
| 2433 | { |
| 2434 | EXPECT_STREQ(e.what(), "Element is not hexadecimal string"); |
| 2435 | } |
| 2436 | |
| 2437 | // Test where fails: position value is invalid |
| 2438 | try |
| 2439 | { |
| 2440 | const json element = R"( |
| 2441 | { |
| 2442 | "register": "0xA0", |
| 2443 | "position": 8, |
| 2444 | "value": 0 |
| 2445 | } |
| 2446 | )"_json; |
| 2447 | parseI2CWriteBit(element); |
| 2448 | ADD_FAILURE() << "Should not have reached this line."; |
| 2449 | } |
| 2450 | catch (const std::invalid_argument& e) |
| 2451 | { |
| 2452 | EXPECT_STREQ(e.what(), "Element is not a bit position"); |
| 2453 | } |
| 2454 | |
| 2455 | // Test where fails: value value is invalid |
| 2456 | try |
| 2457 | { |
| 2458 | const json element = R"( |
| 2459 | { |
| 2460 | "register": "0xA0", |
| 2461 | "position": 3, |
| 2462 | "value": 2 |
| 2463 | } |
| 2464 | )"_json; |
| 2465 | parseI2CWriteBit(element); |
| 2466 | ADD_FAILURE() << "Should not have reached this line."; |
| 2467 | } |
| 2468 | catch (const std::invalid_argument& e) |
| 2469 | { |
| 2470 | EXPECT_STREQ(e.what(), "Element is not a bit value"); |
| 2471 | } |
| 2472 | |
| 2473 | // Test where fails: Required register property not specified |
| 2474 | try |
| 2475 | { |
| 2476 | const json element = R"( |
| 2477 | { |
| 2478 | "position": 3, |
| 2479 | "value": 0 |
| 2480 | } |
| 2481 | )"_json; |
| 2482 | parseI2CWriteBit(element); |
| 2483 | ADD_FAILURE() << "Should not have reached this line."; |
| 2484 | } |
| 2485 | catch (const std::invalid_argument& e) |
| 2486 | { |
| 2487 | EXPECT_STREQ(e.what(), "Required property missing: register"); |
| 2488 | } |
| 2489 | |
| 2490 | // Test where fails: Required position property not specified |
| 2491 | try |
| 2492 | { |
| 2493 | const json element = R"( |
| 2494 | { |
| 2495 | "register": "0xA0", |
| 2496 | "value": 0 |
| 2497 | } |
| 2498 | )"_json; |
| 2499 | parseI2CWriteBit(element); |
| 2500 | ADD_FAILURE() << "Should not have reached this line."; |
| 2501 | } |
| 2502 | catch (const std::invalid_argument& e) |
| 2503 | { |
| 2504 | EXPECT_STREQ(e.what(), "Required property missing: position"); |
| 2505 | } |
| 2506 | |
| 2507 | // Test where fails: Required value property not specified |
| 2508 | try |
| 2509 | { |
| 2510 | const json element = R"( |
| 2511 | { |
| 2512 | "register": "0xA0", |
| 2513 | "position": 3 |
| 2514 | } |
| 2515 | )"_json; |
| 2516 | parseI2CWriteBit(element); |
| 2517 | ADD_FAILURE() << "Should not have reached this line."; |
| 2518 | } |
| 2519 | catch (const std::invalid_argument& e) |
| 2520 | { |
| 2521 | EXPECT_STREQ(e.what(), "Required property missing: value"); |
| 2522 | } |
| 2523 | } |
| 2524 | |
Bob King | 87ff9d7 | 2020-03-31 14:02:55 +0800 | [diff] [blame] | 2525 | TEST(ConfigFileParserTests, ParseI2CWriteByte) |
| 2526 | { |
| 2527 | // Test where works: Only required properties specified |
| 2528 | { |
| 2529 | const json element = R"( |
| 2530 | { |
| 2531 | "register": "0x0A", |
| 2532 | "value": "0xCC" |
| 2533 | } |
| 2534 | )"_json; |
| 2535 | std::unique_ptr<I2CWriteByteAction> action = parseI2CWriteByte(element); |
| 2536 | EXPECT_EQ(action->getRegister(), 0x0A); |
| 2537 | EXPECT_EQ(action->getValue(), 0xCC); |
| 2538 | EXPECT_EQ(action->getMask(), 0xFF); |
| 2539 | } |
| 2540 | |
| 2541 | // Test where works: All properties specified |
| 2542 | { |
| 2543 | const json element = R"( |
| 2544 | { |
| 2545 | "register": "0x0A", |
| 2546 | "value": "0xCC", |
| 2547 | "mask": "0xF7" |
| 2548 | } |
| 2549 | )"_json; |
| 2550 | std::unique_ptr<I2CWriteByteAction> action = parseI2CWriteByte(element); |
| 2551 | EXPECT_EQ(action->getRegister(), 0x0A); |
| 2552 | EXPECT_EQ(action->getValue(), 0xCC); |
| 2553 | EXPECT_EQ(action->getMask(), 0xF7); |
| 2554 | } |
| 2555 | |
| 2556 | // Test where fails: Element is not an object |
| 2557 | try |
| 2558 | { |
| 2559 | const json element = R"( [ "0xFF", "0x01" ] )"_json; |
| 2560 | parseI2CWriteByte(element); |
| 2561 | ADD_FAILURE() << "Should not have reached this line."; |
| 2562 | } |
| 2563 | catch (const std::invalid_argument& e) |
| 2564 | { |
| 2565 | EXPECT_STREQ(e.what(), "Element is not an object"); |
| 2566 | } |
| 2567 | |
| 2568 | // Test where fails: Invalid property specified |
| 2569 | try |
| 2570 | { |
| 2571 | const json element = R"( |
| 2572 | { |
| 2573 | "register": "0x0A", |
| 2574 | "value": "0xCC", |
| 2575 | "mask": "0xF7", |
| 2576 | "foo": 1 |
| 2577 | } |
| 2578 | )"_json; |
| 2579 | parseI2CWriteByte(element); |
| 2580 | ADD_FAILURE() << "Should not have reached this line."; |
| 2581 | } |
| 2582 | catch (const std::invalid_argument& e) |
| 2583 | { |
| 2584 | EXPECT_STREQ(e.what(), "Element contains an invalid property"); |
| 2585 | } |
| 2586 | |
| 2587 | // Test where fails: register value is invalid |
| 2588 | try |
| 2589 | { |
| 2590 | const json element = R"( |
| 2591 | { |
| 2592 | "register": "0x0Z", |
| 2593 | "value": "0xCC", |
| 2594 | "mask": "0xF7" |
| 2595 | } |
| 2596 | )"_json; |
| 2597 | parseI2CWriteByte(element); |
| 2598 | ADD_FAILURE() << "Should not have reached this line."; |
| 2599 | } |
| 2600 | catch (const std::invalid_argument& e) |
| 2601 | { |
| 2602 | EXPECT_STREQ(e.what(), "Element is not hexadecimal string"); |
| 2603 | } |
| 2604 | |
| 2605 | // Test where fails: value value is invalid |
| 2606 | try |
| 2607 | { |
| 2608 | const json element = R"( |
| 2609 | { |
| 2610 | "register": "0x0A", |
| 2611 | "value": "0xCCC", |
| 2612 | "mask": "0xF7" |
| 2613 | } |
| 2614 | )"_json; |
| 2615 | parseI2CWriteByte(element); |
| 2616 | ADD_FAILURE() << "Should not have reached this line."; |
| 2617 | } |
| 2618 | catch (const std::invalid_argument& e) |
| 2619 | { |
| 2620 | EXPECT_STREQ(e.what(), "Element is not hexadecimal string"); |
| 2621 | } |
| 2622 | |
| 2623 | // Test where fails: mask value is invalid |
| 2624 | try |
| 2625 | { |
| 2626 | const json element = R"( |
| 2627 | { |
| 2628 | "register": "0x0A", |
| 2629 | "value": "0xCC", |
| 2630 | "mask": "F7" |
| 2631 | } |
| 2632 | )"_json; |
| 2633 | parseI2CWriteByte(element); |
| 2634 | ADD_FAILURE() << "Should not have reached this line."; |
| 2635 | } |
| 2636 | catch (const std::invalid_argument& e) |
| 2637 | { |
| 2638 | EXPECT_STREQ(e.what(), "Element is not hexadecimal string"); |
| 2639 | } |
| 2640 | |
| 2641 | // Test where fails: Required register property not specified |
| 2642 | try |
| 2643 | { |
| 2644 | const json element = R"( |
| 2645 | { |
| 2646 | "value": "0xCC", |
| 2647 | "mask": "0xF7" |
| 2648 | } |
| 2649 | )"_json; |
| 2650 | parseI2CWriteByte(element); |
| 2651 | ADD_FAILURE() << "Should not have reached this line."; |
| 2652 | } |
| 2653 | catch (const std::invalid_argument& e) |
| 2654 | { |
| 2655 | EXPECT_STREQ(e.what(), "Required property missing: register"); |
| 2656 | } |
| 2657 | |
| 2658 | // Test where fails: Required value property not specified |
| 2659 | try |
| 2660 | { |
| 2661 | const json element = R"( |
| 2662 | { |
| 2663 | "register": "0x0A", |
| 2664 | "mask": "0xF7" |
| 2665 | } |
| 2666 | )"_json; |
| 2667 | parseI2CWriteByte(element); |
| 2668 | ADD_FAILURE() << "Should not have reached this line."; |
| 2669 | } |
| 2670 | catch (const std::invalid_argument& e) |
| 2671 | { |
| 2672 | EXPECT_STREQ(e.what(), "Required property missing: value"); |
| 2673 | } |
| 2674 | } |
| 2675 | |
Bob King | bafcb86 | 2020-03-31 16:39:00 +0800 | [diff] [blame] | 2676 | TEST(ConfigFileParserTests, ParseI2CWriteBytes) |
| 2677 | { |
| 2678 | // Test where works: Only required properties specified |
| 2679 | { |
| 2680 | const json element = R"( |
| 2681 | { |
| 2682 | "register": "0x0A", |
| 2683 | "values": [ "0xCC", "0xFF" ] |
| 2684 | } |
| 2685 | )"_json; |
| 2686 | std::unique_ptr<I2CWriteBytesAction> action = |
| 2687 | parseI2CWriteBytes(element); |
| 2688 | EXPECT_EQ(action->getRegister(), 0x0A); |
| 2689 | EXPECT_EQ(action->getValues().size(), 2); |
| 2690 | EXPECT_EQ(action->getValues()[0], 0xCC); |
| 2691 | EXPECT_EQ(action->getValues()[1], 0xFF); |
| 2692 | EXPECT_EQ(action->getMasks().size(), 0); |
| 2693 | } |
| 2694 | |
| 2695 | // Test where works: All properties specified |
| 2696 | { |
| 2697 | const json element = R"( |
| 2698 | { |
| 2699 | "register": "0x0A", |
| 2700 | "values": [ "0xCC", "0xFF" ], |
| 2701 | "masks": [ "0x7F", "0x77" ] |
| 2702 | } |
| 2703 | )"_json; |
| 2704 | std::unique_ptr<I2CWriteBytesAction> action = |
| 2705 | parseI2CWriteBytes(element); |
| 2706 | EXPECT_EQ(action->getRegister(), 0x0A); |
| 2707 | EXPECT_EQ(action->getValues().size(), 2); |
| 2708 | EXPECT_EQ(action->getValues()[0], 0xCC); |
| 2709 | EXPECT_EQ(action->getValues()[1], 0xFF); |
| 2710 | EXPECT_EQ(action->getMasks().size(), 2); |
| 2711 | EXPECT_EQ(action->getMasks()[0], 0x7F); |
| 2712 | EXPECT_EQ(action->getMasks()[1], 0x77); |
| 2713 | } |
| 2714 | |
| 2715 | // Test where fails: Element is not an object |
| 2716 | try |
| 2717 | { |
| 2718 | const json element = R"( [ "0xFF", "0x01" ] )"_json; |
| 2719 | parseI2CWriteBytes(element); |
| 2720 | ADD_FAILURE() << "Should not have reached this line."; |
| 2721 | } |
| 2722 | catch (const std::invalid_argument& e) |
| 2723 | { |
| 2724 | EXPECT_STREQ(e.what(), "Element is not an object"); |
| 2725 | } |
| 2726 | |
| 2727 | // Test where fails: Invalid property specified |
| 2728 | try |
| 2729 | { |
| 2730 | const json element = R"( |
| 2731 | { |
| 2732 | "register": "0x0A", |
| 2733 | "values": [ "0xCC", "0xFF" ], |
| 2734 | "masks": [ "0x7F", "0x7F" ], |
| 2735 | "foo": 1 |
| 2736 | } |
| 2737 | )"_json; |
| 2738 | parseI2CWriteBytes(element); |
| 2739 | ADD_FAILURE() << "Should not have reached this line."; |
| 2740 | } |
| 2741 | catch (const std::invalid_argument& e) |
| 2742 | { |
| 2743 | EXPECT_STREQ(e.what(), "Element contains an invalid property"); |
| 2744 | } |
| 2745 | |
| 2746 | // Test where fails: register value is invalid |
| 2747 | try |
| 2748 | { |
| 2749 | const json element = R"( |
| 2750 | { |
| 2751 | "register": "0x0Z", |
| 2752 | "values": [ "0xCC", "0xFF" ], |
| 2753 | "masks": [ "0x7F", "0x7F" ] |
| 2754 | } |
| 2755 | )"_json; |
| 2756 | parseI2CWriteBytes(element); |
| 2757 | ADD_FAILURE() << "Should not have reached this line."; |
| 2758 | } |
| 2759 | catch (const std::invalid_argument& e) |
| 2760 | { |
| 2761 | EXPECT_STREQ(e.what(), "Element is not hexadecimal string"); |
| 2762 | } |
| 2763 | |
| 2764 | // Test where fails: values value is invalid |
| 2765 | try |
| 2766 | { |
| 2767 | const json element = R"( |
| 2768 | { |
| 2769 | "register": "0x0A", |
| 2770 | "values": [ "0xCCC", "0xFF" ], |
| 2771 | "masks": [ "0x7F", "0x7F" ] |
| 2772 | } |
| 2773 | )"_json; |
| 2774 | parseI2CWriteBytes(element); |
| 2775 | ADD_FAILURE() << "Should not have reached this line."; |
| 2776 | } |
| 2777 | catch (const std::invalid_argument& e) |
| 2778 | { |
| 2779 | EXPECT_STREQ(e.what(), "Element is not hexadecimal string"); |
| 2780 | } |
| 2781 | |
| 2782 | // Test where fails: masks value is invalid |
| 2783 | try |
| 2784 | { |
| 2785 | const json element = R"( |
| 2786 | { |
| 2787 | "register": "0x0A", |
| 2788 | "values": [ "0xCC", "0xFF" ], |
| 2789 | "masks": [ "F", "0x7F" ] |
| 2790 | } |
| 2791 | )"_json; |
| 2792 | parseI2CWriteBytes(element); |
| 2793 | ADD_FAILURE() << "Should not have reached this line."; |
| 2794 | } |
| 2795 | catch (const std::invalid_argument& e) |
| 2796 | { |
| 2797 | EXPECT_STREQ(e.what(), "Element is not hexadecimal string"); |
| 2798 | } |
| 2799 | |
| 2800 | // Test where fails: number of elements in masks is invalid |
| 2801 | try |
| 2802 | { |
| 2803 | const json element = R"( |
| 2804 | { |
| 2805 | "register": "0x0A", |
| 2806 | "values": [ "0xCC", "0xFF" ], |
| 2807 | "masks": [ "0x7F" ] |
| 2808 | } |
| 2809 | )"_json; |
| 2810 | parseI2CWriteBytes(element); |
| 2811 | ADD_FAILURE() << "Should not have reached this line."; |
| 2812 | } |
| 2813 | catch (const std::invalid_argument& e) |
| 2814 | { |
| 2815 | EXPECT_STREQ(e.what(), "Invalid number of elements in masks"); |
| 2816 | } |
| 2817 | |
| 2818 | // Test where fails: Required register property not specified |
| 2819 | try |
| 2820 | { |
| 2821 | const json element = R"( |
| 2822 | { |
| 2823 | "values": [ "0xCC", "0xFF" ] |
| 2824 | } |
| 2825 | )"_json; |
| 2826 | parseI2CWriteBytes(element); |
| 2827 | ADD_FAILURE() << "Should not have reached this line."; |
| 2828 | } |
| 2829 | catch (const std::invalid_argument& e) |
| 2830 | { |
| 2831 | EXPECT_STREQ(e.what(), "Required property missing: register"); |
| 2832 | } |
| 2833 | |
| 2834 | // Test where fails: Required values property not specified |
| 2835 | try |
| 2836 | { |
| 2837 | const json element = R"( |
| 2838 | { |
| 2839 | "register": "0x0A" |
| 2840 | } |
| 2841 | )"_json; |
| 2842 | parseI2CWriteBytes(element); |
| 2843 | ADD_FAILURE() << "Should not have reached this line."; |
| 2844 | } |
| 2845 | catch (const std::invalid_argument& e) |
| 2846 | { |
| 2847 | EXPECT_STREQ(e.what(), "Required property missing: values"); |
| 2848 | } |
| 2849 | } |
| 2850 | |
Bob King | 93a89d7 | 2020-04-15 15:11:11 +0800 | [diff] [blame] | 2851 | TEST(ConfigFileParserTests, ParseIf) |
| 2852 | { |
| 2853 | // Test where works: Only required properties specified |
| 2854 | { |
| 2855 | const json element = R"( |
| 2856 | { |
| 2857 | "condition": { "run_rule": "is_downlevel_regulator" }, |
| 2858 | "then": [ { "run_rule": "configure_downlevel_regulator" }, |
| 2859 | { "run_rule": "configure_standard_regulator" } ] |
| 2860 | } |
| 2861 | )"_json; |
| 2862 | std::unique_ptr<IfAction> action = parseIf(element); |
| 2863 | EXPECT_NE(action->getConditionAction().get(), nullptr); |
| 2864 | EXPECT_EQ(action->getThenActions().size(), 2); |
| 2865 | EXPECT_EQ(action->getElseActions().size(), 0); |
| 2866 | } |
| 2867 | |
| 2868 | // Test where works: All properties specified |
| 2869 | { |
| 2870 | const json element = R"( |
| 2871 | { |
| 2872 | "condition": { "run_rule": "is_downlevel_regulator" }, |
| 2873 | "then": [ { "run_rule": "configure_downlevel_regulator" } ], |
| 2874 | "else": [ { "run_rule": "configure_standard_regulator" } ] |
| 2875 | } |
| 2876 | )"_json; |
| 2877 | std::unique_ptr<IfAction> action = parseIf(element); |
| 2878 | EXPECT_NE(action->getConditionAction().get(), nullptr); |
| 2879 | EXPECT_EQ(action->getThenActions().size(), 1); |
| 2880 | EXPECT_EQ(action->getElseActions().size(), 1); |
| 2881 | } |
| 2882 | |
| 2883 | // Test where fails: Required condition property not specified |
| 2884 | try |
| 2885 | { |
| 2886 | const json element = R"( |
| 2887 | { |
| 2888 | "then": [ { "run_rule": "configure_downlevel_regulator" } ], |
| 2889 | "else": [ { "run_rule": "configure_standard_regulator" } ] |
| 2890 | } |
| 2891 | )"_json; |
| 2892 | parseIf(element); |
| 2893 | ADD_FAILURE() << "Should not have reached this line."; |
| 2894 | } |
| 2895 | catch (const std::invalid_argument& e) |
| 2896 | { |
| 2897 | EXPECT_STREQ(e.what(), "Required property missing: condition"); |
| 2898 | } |
| 2899 | |
| 2900 | // Test where fails: Required then property not specified |
| 2901 | try |
| 2902 | { |
| 2903 | const json element = R"( |
| 2904 | { |
| 2905 | "condition": { "run_rule": "is_downlevel_regulator" }, |
| 2906 | "else": [ { "run_rule": "configure_standard_regulator" } ] |
| 2907 | } |
| 2908 | )"_json; |
| 2909 | parseIf(element); |
| 2910 | ADD_FAILURE() << "Should not have reached this line."; |
| 2911 | } |
| 2912 | catch (const std::invalid_argument& e) |
| 2913 | { |
| 2914 | EXPECT_STREQ(e.what(), "Required property missing: then"); |
| 2915 | } |
| 2916 | |
| 2917 | // Test where fails: condition value is invalid |
| 2918 | try |
| 2919 | { |
| 2920 | const json element = R"( |
| 2921 | { |
| 2922 | "condition": 1, |
| 2923 | "then": [ { "run_rule": "configure_downlevel_regulator" } ], |
| 2924 | "else": [ { "run_rule": "configure_standard_regulator" } ] |
| 2925 | } |
| 2926 | )"_json; |
| 2927 | parseIf(element); |
| 2928 | ADD_FAILURE() << "Should not have reached this line."; |
| 2929 | } |
| 2930 | catch (const std::invalid_argument& e) |
| 2931 | { |
| 2932 | EXPECT_STREQ(e.what(), "Element is not an object"); |
| 2933 | } |
| 2934 | |
| 2935 | // Test where fails: then value is invalid |
| 2936 | try |
| 2937 | { |
| 2938 | const json element = R"( |
| 2939 | { |
| 2940 | "condition": { "run_rule": "is_downlevel_regulator" }, |
| 2941 | "then": "foo", |
| 2942 | "else": [ { "run_rule": "configure_standard_regulator" } ] |
| 2943 | } |
| 2944 | )"_json; |
| 2945 | parseIf(element); |
| 2946 | ADD_FAILURE() << "Should not have reached this line."; |
| 2947 | } |
| 2948 | catch (const std::invalid_argument& e) |
| 2949 | { |
| 2950 | EXPECT_STREQ(e.what(), "Element is not an array"); |
| 2951 | } |
| 2952 | |
| 2953 | // Test where fails: else value is invalid |
| 2954 | try |
| 2955 | { |
| 2956 | const json element = R"( |
| 2957 | { |
| 2958 | "condition": { "run_rule": "is_downlevel_regulator" }, |
| 2959 | "then": [ { "run_rule": "configure_downlevel_regulator" } ], |
| 2960 | "else": 1 |
| 2961 | } |
| 2962 | )"_json; |
| 2963 | parseIf(element); |
| 2964 | ADD_FAILURE() << "Should not have reached this line."; |
| 2965 | } |
| 2966 | catch (const std::invalid_argument& e) |
| 2967 | { |
| 2968 | EXPECT_STREQ(e.what(), "Element is not an array"); |
| 2969 | } |
| 2970 | |
| 2971 | // Test where fails: Invalid property specified |
| 2972 | try |
| 2973 | { |
| 2974 | const json element = R"( |
| 2975 | { |
| 2976 | "condition": { "run_rule": "is_downlevel_regulator" }, |
| 2977 | "then": [ { "run_rule": "configure_downlevel_regulator" } ], |
| 2978 | "foo": "bar" |
| 2979 | } |
| 2980 | )"_json; |
| 2981 | parseIf(element); |
| 2982 | ADD_FAILURE() << "Should not have reached this line."; |
| 2983 | } |
| 2984 | catch (const std::invalid_argument& e) |
| 2985 | { |
| 2986 | EXPECT_STREQ(e.what(), "Element contains an invalid property"); |
| 2987 | } |
| 2988 | |
| 2989 | // Test where fails: Element is not an object |
| 2990 | try |
| 2991 | { |
| 2992 | const json element = R"( [ "0xFF", "0x01" ] )"_json; |
| 2993 | parseIf(element); |
| 2994 | ADD_FAILURE() << "Should not have reached this line."; |
| 2995 | } |
| 2996 | catch (const std::invalid_argument& e) |
| 2997 | { |
| 2998 | EXPECT_STREQ(e.what(), "Element is not an object"); |
| 2999 | } |
| 3000 | } |
| 3001 | |
Bob King | 87ff9d7 | 2020-03-31 14:02:55 +0800 | [diff] [blame] | 3002 | TEST(ConfigFileParserTests, ParseInt8) |
| 3003 | { |
| 3004 | // Test where works: INT8_MIN |
| 3005 | { |
| 3006 | const json element = R"( -128 )"_json; |
| 3007 | int8_t value = parseInt8(element); |
| 3008 | EXPECT_EQ(value, -128); |
| 3009 | } |
| 3010 | |
| 3011 | // Test where works: INT8_MAX |
| 3012 | { |
| 3013 | const json element = R"( 127 )"_json; |
| 3014 | int8_t value = parseInt8(element); |
| 3015 | EXPECT_EQ(value, 127); |
| 3016 | } |
| 3017 | |
| 3018 | // Test where fails: Element is not an integer |
| 3019 | try |
| 3020 | { |
| 3021 | const json element = R"( 1.03 )"_json; |
| 3022 | parseInt8(element); |
| 3023 | ADD_FAILURE() << "Should not have reached this line."; |
| 3024 | } |
| 3025 | catch (const std::invalid_argument& e) |
| 3026 | { |
| 3027 | EXPECT_STREQ(e.what(), "Element is not an integer"); |
| 3028 | } |
| 3029 | |
| 3030 | // Test where fails: Value < INT8_MIN |
| 3031 | try |
| 3032 | { |
| 3033 | const json element = R"( -129 )"_json; |
| 3034 | parseInt8(element); |
| 3035 | ADD_FAILURE() << "Should not have reached this line."; |
| 3036 | } |
| 3037 | catch (const std::invalid_argument& e) |
| 3038 | { |
| 3039 | EXPECT_STREQ(e.what(), "Element is not an 8-bit signed integer"); |
| 3040 | } |
| 3041 | |
| 3042 | // Test where fails: Value > INT8_MAX |
| 3043 | try |
| 3044 | { |
| 3045 | const json element = R"( 128 )"_json; |
| 3046 | parseInt8(element); |
| 3047 | ADD_FAILURE() << "Should not have reached this line."; |
| 3048 | } |
| 3049 | catch (const std::invalid_argument& e) |
| 3050 | { |
| 3051 | EXPECT_STREQ(e.what(), "Element is not an 8-bit signed integer"); |
| 3052 | } |
| 3053 | } |
| 3054 | |
Bob King | f1b58dc | 2020-04-14 14:53:10 +0800 | [diff] [blame] | 3055 | TEST(ConfigFileParserTests, ParseNot) |
| 3056 | { |
| 3057 | // Test where works |
| 3058 | { |
| 3059 | const json element = R"( |
| 3060 | { "i2c_compare_byte": { "register": "0xA0", "value": "0x00" } } |
| 3061 | )"_json; |
| 3062 | std::unique_ptr<NotAction> action = parseNot(element); |
| 3063 | EXPECT_NE(action->getAction().get(), nullptr); |
| 3064 | } |
| 3065 | |
| 3066 | // Test where fails: Element is not an object |
| 3067 | try |
| 3068 | { |
| 3069 | const json element = R"( [ "0xFF", "0x01" ] )"_json; |
| 3070 | parseNot(element); |
| 3071 | ADD_FAILURE() << "Should not have reached this line."; |
| 3072 | } |
| 3073 | catch (const std::invalid_argument& e) |
| 3074 | { |
| 3075 | EXPECT_STREQ(e.what(), "Element is not an object"); |
| 3076 | } |
| 3077 | } |
| 3078 | |
Bob King | 0b51a9b | 2020-04-15 13:24:18 +0800 | [diff] [blame] | 3079 | TEST(ConfigFileParserTests, ParseOr) |
| 3080 | { |
| 3081 | // Test where works: Element is an array with 2 actions |
| 3082 | { |
| 3083 | const json element = R"( |
| 3084 | [ |
| 3085 | { "i2c_compare_byte": { "register": "0xA0", "value": "0x00" } }, |
| 3086 | { "i2c_compare_byte": { "register": "0xA1", "value": "0x00" } } |
| 3087 | ] |
| 3088 | )"_json; |
| 3089 | std::unique_ptr<OrAction> action = parseOr(element); |
| 3090 | EXPECT_EQ(action->getActions().size(), 2); |
| 3091 | } |
| 3092 | |
| 3093 | // Test where fails: Element is an array with 1 action |
| 3094 | try |
| 3095 | { |
| 3096 | const json element = R"( |
| 3097 | [ |
| 3098 | { "i2c_compare_byte": { "register": "0xA0", "value": "0x00" } } |
| 3099 | ] |
| 3100 | )"_json; |
| 3101 | parseOr(element); |
| 3102 | ADD_FAILURE() << "Should not have reached this line."; |
| 3103 | } |
| 3104 | catch (const std::invalid_argument& e) |
| 3105 | { |
| 3106 | EXPECT_STREQ(e.what(), "Array must contain two or more actions"); |
| 3107 | } |
| 3108 | |
| 3109 | // Test where fails: Element is not an array |
| 3110 | try |
| 3111 | { |
| 3112 | const json element = R"( |
| 3113 | { |
| 3114 | "foo": "bar" |
| 3115 | } |
| 3116 | )"_json; |
| 3117 | parseOr(element); |
| 3118 | ADD_FAILURE() << "Should not have reached this line."; |
| 3119 | } |
| 3120 | catch (const std::invalid_argument& e) |
| 3121 | { |
| 3122 | EXPECT_STREQ(e.what(), "Element is not an array"); |
| 3123 | } |
| 3124 | } |
| 3125 | |
Bob King | 8461488 | 2020-04-30 13:13:48 +0800 | [diff] [blame] | 3126 | TEST(ConfigFileParserTests, ParsePMBusReadSensor) |
| 3127 | { |
| 3128 | // Test where works: Only required properties specified |
| 3129 | { |
| 3130 | const json element = R"( |
| 3131 | { |
| 3132 | "type": "iout", |
| 3133 | "command": "0x8C", |
| 3134 | "format": "linear_11" |
| 3135 | } |
| 3136 | )"_json; |
| 3137 | std::unique_ptr<PMBusReadSensorAction> action = |
| 3138 | parsePMBusReadSensor(element); |
| 3139 | EXPECT_EQ(action->getType(), pmbus_utils::SensorValueType::iout); |
| 3140 | EXPECT_EQ(action->getCommand(), 0x8C); |
| 3141 | EXPECT_EQ(action->getFormat(), |
| 3142 | pmbus_utils::SensorDataFormat::linear_11); |
| 3143 | EXPECT_EQ(action->getExponent().has_value(), false); |
| 3144 | } |
| 3145 | |
| 3146 | // Test where works: All properties specified |
| 3147 | { |
| 3148 | const json element = R"( |
| 3149 | { |
| 3150 | "type": "temperature", |
| 3151 | "command": "0x7A", |
| 3152 | "format": "linear_16", |
| 3153 | "exponent": -8 |
| 3154 | } |
| 3155 | )"_json; |
| 3156 | std::unique_ptr<PMBusReadSensorAction> action = |
| 3157 | parsePMBusReadSensor(element); |
| 3158 | EXPECT_EQ(action->getType(), pmbus_utils::SensorValueType::temperature); |
| 3159 | EXPECT_EQ(action->getCommand(), 0x7A); |
| 3160 | EXPECT_EQ(action->getFormat(), |
| 3161 | pmbus_utils::SensorDataFormat::linear_16); |
| 3162 | EXPECT_EQ(action->getExponent().has_value(), true); |
| 3163 | EXPECT_EQ(action->getExponent().value(), -8); |
| 3164 | } |
| 3165 | |
| 3166 | // Test where fails: Element is not an object |
| 3167 | try |
| 3168 | { |
| 3169 | const json element = R"( [ "0xFF", "0x01" ] )"_json; |
| 3170 | parsePMBusReadSensor(element); |
| 3171 | ADD_FAILURE() << "Should not have reached this line."; |
| 3172 | } |
| 3173 | catch (const std::invalid_argument& e) |
| 3174 | { |
| 3175 | EXPECT_STREQ(e.what(), "Element is not an object"); |
| 3176 | } |
| 3177 | |
| 3178 | // Test where fails: Invalid property specified |
| 3179 | try |
| 3180 | { |
| 3181 | const json element = R"( |
| 3182 | { |
| 3183 | "type": "iout", |
| 3184 | "command": "0x8C", |
| 3185 | "format": "linear_11", |
| 3186 | "foo": 1 |
| 3187 | } |
| 3188 | )"_json; |
| 3189 | parsePMBusReadSensor(element); |
| 3190 | ADD_FAILURE() << "Should not have reached this line."; |
| 3191 | } |
| 3192 | catch (const std::invalid_argument& e) |
| 3193 | { |
| 3194 | EXPECT_STREQ(e.what(), "Element contains an invalid property"); |
| 3195 | } |
| 3196 | |
| 3197 | // Test where fails: Required type property not specified |
| 3198 | try |
| 3199 | { |
| 3200 | const json element = R"( |
| 3201 | { |
| 3202 | "command": "0x8C", |
| 3203 | "format": "linear_11" |
| 3204 | } |
| 3205 | )"_json; |
| 3206 | parsePMBusReadSensor(element); |
| 3207 | ADD_FAILURE() << "Should not have reached this line."; |
| 3208 | } |
| 3209 | catch (const std::invalid_argument& e) |
| 3210 | { |
| 3211 | EXPECT_STREQ(e.what(), "Required property missing: type"); |
| 3212 | } |
| 3213 | |
| 3214 | // Test where fails: Required command property not specified |
| 3215 | try |
| 3216 | { |
| 3217 | const json element = R"( |
| 3218 | { |
| 3219 | "type": "iout", |
| 3220 | "format": "linear_11" |
| 3221 | } |
| 3222 | )"_json; |
| 3223 | parsePMBusReadSensor(element); |
| 3224 | ADD_FAILURE() << "Should not have reached this line."; |
| 3225 | } |
| 3226 | catch (const std::invalid_argument& e) |
| 3227 | { |
| 3228 | EXPECT_STREQ(e.what(), "Required property missing: command"); |
| 3229 | } |
| 3230 | |
| 3231 | // Test where fails: Required format property not specified |
| 3232 | try |
| 3233 | { |
| 3234 | const json element = R"( |
| 3235 | { |
| 3236 | "type": "iout", |
| 3237 | "command": "0x8C" |
| 3238 | } |
| 3239 | )"_json; |
| 3240 | parsePMBusReadSensor(element); |
| 3241 | ADD_FAILURE() << "Should not have reached this line."; |
| 3242 | } |
| 3243 | catch (const std::invalid_argument& e) |
| 3244 | { |
| 3245 | EXPECT_STREQ(e.what(), "Required property missing: format"); |
| 3246 | } |
| 3247 | |
| 3248 | // Test where fails: type value is invalid |
| 3249 | try |
| 3250 | { |
| 3251 | const json element = R"( |
| 3252 | { |
| 3253 | "type": 1, |
| 3254 | "command": "0x7A", |
| 3255 | "format": "linear_16" |
| 3256 | } |
| 3257 | )"_json; |
| 3258 | parsePMBusReadSensor(element); |
| 3259 | ADD_FAILURE() << "Should not have reached this line."; |
| 3260 | } |
| 3261 | catch (const std::invalid_argument& e) |
| 3262 | { |
| 3263 | EXPECT_STREQ(e.what(), "Element is not a string"); |
| 3264 | } |
| 3265 | |
| 3266 | // Test where fails: command value is invalid |
| 3267 | try |
| 3268 | { |
| 3269 | const json element = R"( |
| 3270 | { |
| 3271 | "type": "temperature", |
| 3272 | "command": 0, |
| 3273 | "format": "linear_16" |
| 3274 | } |
| 3275 | )"_json; |
| 3276 | parsePMBusReadSensor(element); |
| 3277 | ADD_FAILURE() << "Should not have reached this line."; |
| 3278 | } |
| 3279 | catch (const std::invalid_argument& e) |
| 3280 | { |
| 3281 | EXPECT_STREQ(e.what(), "Element is not a string"); |
| 3282 | } |
| 3283 | |
| 3284 | // Test where fails: format value is invalid |
| 3285 | try |
| 3286 | { |
| 3287 | const json element = R"( |
| 3288 | { |
| 3289 | "type": "temperature", |
| 3290 | "command": "0x7A", |
| 3291 | "format": 1 |
| 3292 | } |
| 3293 | )"_json; |
| 3294 | parsePMBusReadSensor(element); |
| 3295 | ADD_FAILURE() << "Should not have reached this line."; |
| 3296 | } |
| 3297 | catch (const std::invalid_argument& e) |
| 3298 | { |
| 3299 | EXPECT_STREQ(e.what(), "Element is not a string"); |
| 3300 | } |
| 3301 | |
| 3302 | // Test where fails: exponent value is invalid |
| 3303 | try |
| 3304 | { |
| 3305 | const json element = R"( |
| 3306 | { |
| 3307 | "type": "temperature", |
| 3308 | "command": "0x7A", |
| 3309 | "format": "linear_16", |
| 3310 | "exponent": 1.3 |
| 3311 | } |
| 3312 | )"_json; |
| 3313 | parsePMBusReadSensor(element); |
| 3314 | ADD_FAILURE() << "Should not have reached this line."; |
| 3315 | } |
| 3316 | catch (const std::invalid_argument& e) |
| 3317 | { |
| 3318 | EXPECT_STREQ(e.what(), "Element is not an integer"); |
| 3319 | } |
| 3320 | } |
| 3321 | |
Shawn McCarney | 0e8c68a | 2020-03-27 01:44:48 -0500 | [diff] [blame] | 3322 | TEST(ConfigFileParserTests, ParsePMBusWriteVoutCommand) |
| 3323 | { |
| 3324 | // Test where works: Only required properties specified |
| 3325 | { |
| 3326 | const json element = R"( |
| 3327 | { |
| 3328 | "format": "linear" |
| 3329 | } |
| 3330 | )"_json; |
| 3331 | std::unique_ptr<PMBusWriteVoutCommandAction> action = |
| 3332 | parsePMBusWriteVoutCommand(element); |
| 3333 | EXPECT_EQ(action->getVolts().has_value(), false); |
| 3334 | EXPECT_EQ(action->getFormat(), pmbus_utils::VoutDataFormat::linear); |
| 3335 | EXPECT_EQ(action->getExponent().has_value(), false); |
| 3336 | EXPECT_EQ(action->isVerified(), false); |
| 3337 | } |
| 3338 | |
| 3339 | // Test where works: All properties specified |
| 3340 | { |
| 3341 | const json element = R"( |
| 3342 | { |
| 3343 | "volts": 1.03, |
| 3344 | "format": "linear", |
| 3345 | "exponent": -8, |
| 3346 | "is_verified": true |
| 3347 | } |
| 3348 | )"_json; |
| 3349 | std::unique_ptr<PMBusWriteVoutCommandAction> action = |
| 3350 | parsePMBusWriteVoutCommand(element); |
| 3351 | EXPECT_EQ(action->getVolts().has_value(), true); |
| 3352 | EXPECT_EQ(action->getVolts().value(), 1.03); |
| 3353 | EXPECT_EQ(action->getFormat(), pmbus_utils::VoutDataFormat::linear); |
| 3354 | EXPECT_EQ(action->getExponent().has_value(), true); |
| 3355 | EXPECT_EQ(action->getExponent().value(), -8); |
| 3356 | EXPECT_EQ(action->isVerified(), true); |
| 3357 | } |
| 3358 | |
| 3359 | // Test where fails: Element is not an object |
| 3360 | try |
| 3361 | { |
| 3362 | const json element = R"( [ "0xFF", "0x01" ] )"_json; |
| 3363 | parsePMBusWriteVoutCommand(element); |
| 3364 | ADD_FAILURE() << "Should not have reached this line."; |
| 3365 | } |
| 3366 | catch (const std::invalid_argument& e) |
| 3367 | { |
| 3368 | EXPECT_STREQ(e.what(), "Element is not an object"); |
| 3369 | } |
| 3370 | |
| 3371 | // Test where fails: volts value is invalid |
| 3372 | try |
| 3373 | { |
| 3374 | const json element = R"( |
| 3375 | { |
| 3376 | "volts": "foo", |
| 3377 | "format": "linear" |
| 3378 | } |
| 3379 | )"_json; |
| 3380 | parsePMBusWriteVoutCommand(element); |
| 3381 | ADD_FAILURE() << "Should not have reached this line."; |
| 3382 | } |
| 3383 | catch (const std::invalid_argument& e) |
| 3384 | { |
| 3385 | EXPECT_STREQ(e.what(), "Element is not a number"); |
| 3386 | } |
| 3387 | |
| 3388 | // Test where fails: Required format property not specified |
| 3389 | try |
| 3390 | { |
| 3391 | const json element = R"( |
| 3392 | { |
| 3393 | "volts": 1.03, |
| 3394 | "is_verified": true |
| 3395 | } |
| 3396 | )"_json; |
| 3397 | parsePMBusWriteVoutCommand(element); |
| 3398 | ADD_FAILURE() << "Should not have reached this line."; |
| 3399 | } |
| 3400 | catch (const std::invalid_argument& e) |
| 3401 | { |
| 3402 | EXPECT_STREQ(e.what(), "Required property missing: format"); |
| 3403 | } |
| 3404 | |
| 3405 | // Test where fails: format value is invalid |
| 3406 | try |
| 3407 | { |
| 3408 | const json element = R"( |
| 3409 | { |
| 3410 | "format": "linear_11" |
| 3411 | } |
| 3412 | )"_json; |
| 3413 | parsePMBusWriteVoutCommand(element); |
| 3414 | ADD_FAILURE() << "Should not have reached this line."; |
| 3415 | } |
| 3416 | catch (const std::invalid_argument& e) |
| 3417 | { |
| 3418 | EXPECT_STREQ(e.what(), "Invalid format value: linear_11"); |
| 3419 | } |
| 3420 | |
| 3421 | // Test where fails: exponent value is invalid |
| 3422 | try |
| 3423 | { |
| 3424 | const json element = R"( |
| 3425 | { |
| 3426 | "format": "linear", |
| 3427 | "exponent": 1.3 |
| 3428 | } |
| 3429 | )"_json; |
| 3430 | parsePMBusWriteVoutCommand(element); |
| 3431 | ADD_FAILURE() << "Should not have reached this line."; |
| 3432 | } |
| 3433 | catch (const std::invalid_argument& e) |
| 3434 | { |
| 3435 | EXPECT_STREQ(e.what(), "Element is not an integer"); |
| 3436 | } |
| 3437 | |
| 3438 | // Test where fails: is_verified value is invalid |
| 3439 | try |
| 3440 | { |
| 3441 | const json element = R"( |
| 3442 | { |
| 3443 | "format": "linear", |
| 3444 | "is_verified": "true" |
| 3445 | } |
| 3446 | )"_json; |
| 3447 | parsePMBusWriteVoutCommand(element); |
| 3448 | ADD_FAILURE() << "Should not have reached this line."; |
| 3449 | } |
| 3450 | catch (const std::invalid_argument& e) |
| 3451 | { |
| 3452 | EXPECT_STREQ(e.what(), "Element is not a boolean"); |
| 3453 | } |
| 3454 | |
| 3455 | // Test where fails: Invalid property specified |
| 3456 | try |
| 3457 | { |
| 3458 | const json element = R"( |
| 3459 | { |
| 3460 | "format": "linear", |
| 3461 | "foo": "bar" |
| 3462 | } |
| 3463 | )"_json; |
| 3464 | parsePMBusWriteVoutCommand(element); |
| 3465 | ADD_FAILURE() << "Should not have reached this line."; |
| 3466 | } |
| 3467 | catch (const std::invalid_argument& e) |
| 3468 | { |
| 3469 | EXPECT_STREQ(e.what(), "Element contains an invalid property"); |
| 3470 | } |
| 3471 | } |
| 3472 | |
Bob King | 2aafb1c | 2020-04-16 15:24:32 +0800 | [diff] [blame] | 3473 | TEST(ConfigFileParserTests, ParsePresenceDetection) |
| 3474 | { |
| 3475 | // Test where works: actions property specified |
| 3476 | { |
| 3477 | const json element = R"( |
| 3478 | { |
| 3479 | "actions": [ |
| 3480 | { "run_rule": "read_sensors_rule" } |
| 3481 | ] |
| 3482 | } |
| 3483 | )"_json; |
| 3484 | std::unique_ptr<PresenceDetection> presenceDetection = |
| 3485 | parsePresenceDetection(element); |
| 3486 | EXPECT_EQ(presenceDetection->getActions().size(), 1); |
| 3487 | } |
| 3488 | |
| 3489 | // Test where works: rule_id property specified |
| 3490 | { |
| 3491 | const json element = R"( |
| 3492 | { |
| 3493 | "comments": [ "comments property" ], |
| 3494 | "rule_id": "set_voltage_rule" |
| 3495 | } |
| 3496 | )"_json; |
| 3497 | std::unique_ptr<PresenceDetection> presenceDetection = |
| 3498 | parsePresenceDetection(element); |
| 3499 | EXPECT_EQ(presenceDetection->getActions().size(), 1); |
| 3500 | } |
| 3501 | |
| 3502 | // Test where fails: actions object is invalid |
| 3503 | try |
| 3504 | { |
| 3505 | const json element = R"( |
| 3506 | { |
| 3507 | "actions": 1 |
| 3508 | } |
| 3509 | )"_json; |
| 3510 | parsePresenceDetection(element); |
| 3511 | ADD_FAILURE() << "Should not have reached this line."; |
| 3512 | } |
| 3513 | catch (const std::invalid_argument& e) |
| 3514 | { |
| 3515 | EXPECT_STREQ(e.what(), "Element is not an array"); |
| 3516 | } |
| 3517 | |
| 3518 | // Test where fails: rule_id value is invalid |
| 3519 | try |
| 3520 | { |
| 3521 | const json element = R"( |
| 3522 | { |
| 3523 | "rule_id": 1 |
| 3524 | } |
| 3525 | )"_json; |
| 3526 | parsePresenceDetection(element); |
| 3527 | ADD_FAILURE() << "Should not have reached this line."; |
| 3528 | } |
| 3529 | catch (const std::invalid_argument& e) |
| 3530 | { |
| 3531 | EXPECT_STREQ(e.what(), "Element is not a string"); |
| 3532 | } |
| 3533 | |
| 3534 | // Test where fails: Required actions or rule_id property not specified |
| 3535 | try |
| 3536 | { |
| 3537 | const json element = R"( |
| 3538 | { |
| 3539 | "comments": [ "comments property" ] |
| 3540 | } |
| 3541 | )"_json; |
| 3542 | parsePresenceDetection(element); |
| 3543 | ADD_FAILURE() << "Should not have reached this line."; |
| 3544 | } |
| 3545 | catch (const std::invalid_argument& e) |
| 3546 | { |
| 3547 | EXPECT_STREQ(e.what(), "Invalid property combination: Must contain " |
| 3548 | "either rule_id or actions"); |
| 3549 | } |
| 3550 | |
| 3551 | // Test where fails: Required actions or rule_id property both specified |
| 3552 | try |
| 3553 | { |
| 3554 | const json element = R"( |
| 3555 | { |
| 3556 | "rule_id": "set_voltage_rule", |
| 3557 | "actions": [ |
| 3558 | { "run_rule": "read_sensors_rule" } |
| 3559 | ] |
| 3560 | } |
| 3561 | )"_json; |
| 3562 | parsePresenceDetection(element); |
| 3563 | ADD_FAILURE() << "Should not have reached this line."; |
| 3564 | } |
| 3565 | catch (const std::invalid_argument& e) |
| 3566 | { |
| 3567 | EXPECT_STREQ(e.what(), "Invalid property combination: Must contain " |
| 3568 | "either rule_id or actions"); |
| 3569 | } |
| 3570 | |
| 3571 | // Test where fails: Element is not an object |
| 3572 | try |
| 3573 | { |
| 3574 | const json element = R"( [ "foo", "bar" ] )"_json; |
| 3575 | parsePresenceDetection(element); |
| 3576 | ADD_FAILURE() << "Should not have reached this line."; |
| 3577 | } |
| 3578 | catch (const std::invalid_argument& e) |
| 3579 | { |
| 3580 | EXPECT_STREQ(e.what(), "Element is not an object"); |
| 3581 | } |
| 3582 | |
| 3583 | // Test where fails: Invalid property specified |
| 3584 | try |
| 3585 | { |
| 3586 | const json element = R"( |
| 3587 | { |
| 3588 | "foo": "bar", |
| 3589 | "actions": [ |
| 3590 | { "run_rule": "read_sensors_rule" } |
| 3591 | ] |
| 3592 | } |
| 3593 | )"_json; |
| 3594 | parsePresenceDetection(element); |
| 3595 | ADD_FAILURE() << "Should not have reached this line."; |
| 3596 | } |
| 3597 | catch (const std::invalid_argument& e) |
| 3598 | { |
| 3599 | EXPECT_STREQ(e.what(), "Element contains an invalid property"); |
| 3600 | } |
| 3601 | } |
| 3602 | |
Bob King | a2f2a0d | 2020-04-09 13:32:14 +0800 | [diff] [blame] | 3603 | TEST(ConfigFileParserTests, ParseRail) |
| 3604 | { |
| 3605 | // Test where works: Only required properties specified |
| 3606 | { |
| 3607 | const json element = R"( |
| 3608 | { |
| 3609 | "id": "vdd" |
| 3610 | } |
| 3611 | )"_json; |
| 3612 | std::unique_ptr<Rail> rail = parseRail(element); |
| 3613 | EXPECT_EQ(rail->getID(), "vdd"); |
| 3614 | EXPECT_EQ(rail->getConfiguration(), nullptr); |
| 3615 | EXPECT_EQ(rail->getSensorMonitoring(), nullptr); |
| 3616 | } |
| 3617 | |
| 3618 | // Test where works: All properties specified |
| 3619 | { |
| 3620 | const json element = R"( |
| 3621 | { |
| 3622 | "comments": [ "comments property" ], |
| 3623 | "id": "vdd", |
| 3624 | "configuration": { |
| 3625 | "volts": 1.1, |
| 3626 | "actions": [ |
| 3627 | { |
| 3628 | "pmbus_write_vout_command": { |
| 3629 | "format": "linear" |
| 3630 | } |
| 3631 | } |
| 3632 | ] |
| 3633 | }, |
| 3634 | "sensor_monitoring": { |
| 3635 | "actions": [ |
| 3636 | { "run_rule": "read_sensors_rule" } |
| 3637 | ] |
| 3638 | } |
| 3639 | } |
| 3640 | )"_json; |
| 3641 | std::unique_ptr<Rail> rail = parseRail(element); |
| 3642 | EXPECT_EQ(rail->getID(), "vdd"); |
| 3643 | EXPECT_NE(rail->getConfiguration(), nullptr); |
| 3644 | EXPECT_NE(rail->getSensorMonitoring(), nullptr); |
| 3645 | } |
| 3646 | |
| 3647 | // Test where fails: id property not specified |
| 3648 | try |
| 3649 | { |
| 3650 | const json element = R"( |
| 3651 | { |
| 3652 | "configuration": { |
| 3653 | "volts": 1.1, |
| 3654 | "actions": [ |
| 3655 | { |
| 3656 | "pmbus_write_vout_command": { |
| 3657 | "format": "linear" |
| 3658 | } |
| 3659 | } |
| 3660 | ] |
| 3661 | } |
| 3662 | } |
| 3663 | )"_json; |
| 3664 | parseRail(element); |
| 3665 | ADD_FAILURE() << "Should not have reached this line."; |
| 3666 | } |
| 3667 | catch (const std::invalid_argument& e) |
| 3668 | { |
| 3669 | EXPECT_STREQ(e.what(), "Required property missing: id"); |
| 3670 | } |
| 3671 | |
| 3672 | // Test where fails: id property is invalid |
| 3673 | try |
| 3674 | { |
| 3675 | const json element = R"( |
| 3676 | { |
| 3677 | "id": "", |
| 3678 | "configuration": { |
| 3679 | "volts": 1.1, |
| 3680 | "actions": [ |
| 3681 | { |
| 3682 | "pmbus_write_vout_command": { |
| 3683 | "format": "linear" |
| 3684 | } |
| 3685 | } |
| 3686 | ] |
| 3687 | } |
| 3688 | } |
| 3689 | )"_json; |
| 3690 | parseRail(element); |
| 3691 | ADD_FAILURE() << "Should not have reached this line."; |
| 3692 | } |
| 3693 | catch (const std::invalid_argument& e) |
| 3694 | { |
| 3695 | EXPECT_STREQ(e.what(), "Element contains an empty string"); |
| 3696 | } |
| 3697 | |
| 3698 | // Test where fails: Element is not an object |
| 3699 | try |
| 3700 | { |
| 3701 | const json element = R"( [ "0xFF", "0x01" ] )"_json; |
| 3702 | parseRail(element); |
| 3703 | ADD_FAILURE() << "Should not have reached this line."; |
| 3704 | } |
| 3705 | catch (const std::invalid_argument& e) |
| 3706 | { |
| 3707 | EXPECT_STREQ(e.what(), "Element is not an object"); |
| 3708 | } |
| 3709 | |
| 3710 | // Test where fails: configuration value is invalid |
| 3711 | try |
| 3712 | { |
| 3713 | const json element = R"( |
| 3714 | { |
| 3715 | "id": "vdd", |
| 3716 | "configuration": "config" |
| 3717 | } |
| 3718 | )"_json; |
| 3719 | parseRail(element); |
| 3720 | ADD_FAILURE() << "Should not have reached this line."; |
| 3721 | } |
| 3722 | catch (const std::invalid_argument& e) |
| 3723 | { |
| 3724 | EXPECT_STREQ(e.what(), "Element is not an object"); |
| 3725 | } |
| 3726 | |
| 3727 | // Test where fails: sensor_monitoring value is invalid |
| 3728 | try |
| 3729 | { |
| 3730 | const json element = R"( |
| 3731 | { |
| 3732 | "comments": [ "comments property" ], |
| 3733 | "id": "vdd", |
| 3734 | "configuration": { |
| 3735 | "volts": 1.1, |
| 3736 | "actions": [ |
| 3737 | { |
| 3738 | "pmbus_write_vout_command": { |
| 3739 | "format": "linear" |
| 3740 | } |
| 3741 | } |
| 3742 | ] |
| 3743 | }, |
| 3744 | "sensor_monitoring": 1 |
| 3745 | } |
| 3746 | )"_json; |
| 3747 | parseRail(element); |
| 3748 | ADD_FAILURE() << "Should not have reached this line."; |
| 3749 | } |
| 3750 | catch (const std::invalid_argument& e) |
| 3751 | { |
| 3752 | EXPECT_STREQ(e.what(), "Element is not an object"); |
| 3753 | } |
| 3754 | |
| 3755 | // Test where fails: Invalid property specified |
| 3756 | try |
| 3757 | { |
| 3758 | const json element = R"( |
| 3759 | { |
| 3760 | "id": "vdd", |
| 3761 | "foo" : true |
| 3762 | } |
| 3763 | )"_json; |
| 3764 | parseRail(element); |
| 3765 | ADD_FAILURE() << "Should not have reached this line."; |
| 3766 | } |
| 3767 | catch (const std::invalid_argument& e) |
| 3768 | { |
| 3769 | EXPECT_STREQ(e.what(), "Element contains an invalid property"); |
| 3770 | } |
| 3771 | } |
| 3772 | |
| 3773 | TEST(ConfigFileParserTests, ParseRailArray) |
| 3774 | { |
| 3775 | // Test where works |
| 3776 | { |
| 3777 | const json element = R"( |
| 3778 | [ |
| 3779 | { "id": "vdd" }, |
| 3780 | { "id": "vio" } |
| 3781 | ] |
| 3782 | )"_json; |
| 3783 | std::vector<std::unique_ptr<Rail>> rails = parseRailArray(element); |
| 3784 | EXPECT_EQ(rails.size(), 2); |
| 3785 | EXPECT_EQ(rails[0]->getID(), "vdd"); |
| 3786 | EXPECT_EQ(rails[1]->getID(), "vio"); |
| 3787 | } |
| 3788 | |
| 3789 | // Test where fails: Element is not an array |
| 3790 | try |
| 3791 | { |
| 3792 | const json element = R"( |
| 3793 | { |
| 3794 | "foo": "bar" |
| 3795 | } |
| 3796 | )"_json; |
| 3797 | parseRailArray(element); |
| 3798 | ADD_FAILURE() << "Should not have reached this line."; |
| 3799 | } |
| 3800 | catch (const std::invalid_argument& e) |
| 3801 | { |
| 3802 | EXPECT_STREQ(e.what(), "Element is not an array"); |
| 3803 | } |
| 3804 | } |
| 3805 | |
Shawn McCarney | 0e8c68a | 2020-03-27 01:44:48 -0500 | [diff] [blame] | 3806 | TEST(ConfigFileParserTests, ParseRoot) |
| 3807 | { |
| 3808 | // Test where works: Only required properties specified |
| 3809 | { |
| 3810 | const json element = R"( |
| 3811 | { |
| 3812 | "chassis": [ |
| 3813 | { "number": 1 } |
| 3814 | ] |
| 3815 | } |
| 3816 | )"_json; |
| 3817 | std::vector<std::unique_ptr<Rule>> rules{}; |
| 3818 | std::vector<std::unique_ptr<Chassis>> chassis{}; |
| 3819 | std::tie(rules, chassis) = parseRoot(element); |
| 3820 | EXPECT_EQ(rules.size(), 0); |
Bob King | 0e70113 | 2020-04-03 21:50:31 +0800 | [diff] [blame] | 3821 | EXPECT_EQ(chassis.size(), 1); |
Shawn McCarney | 0e8c68a | 2020-03-27 01:44:48 -0500 | [diff] [blame] | 3822 | } |
| 3823 | |
| 3824 | // Test where works: All properties specified |
| 3825 | { |
| 3826 | const json element = R"( |
| 3827 | { |
| 3828 | "comments": [ "Config file for a FooBar one-chassis system" ], |
| 3829 | "rules": [ |
| 3830 | { |
| 3831 | "id": "set_voltage_rule", |
| 3832 | "actions": [ |
| 3833 | { "pmbus_write_vout_command": { "format": "linear" } } |
| 3834 | ] |
| 3835 | } |
| 3836 | ], |
| 3837 | "chassis": [ |
| 3838 | { "number": 1 }, |
| 3839 | { "number": 3 } |
| 3840 | ] |
| 3841 | } |
| 3842 | )"_json; |
| 3843 | std::vector<std::unique_ptr<Rule>> rules{}; |
| 3844 | std::vector<std::unique_ptr<Chassis>> chassis{}; |
| 3845 | std::tie(rules, chassis) = parseRoot(element); |
| 3846 | EXPECT_EQ(rules.size(), 1); |
Bob King | 0e70113 | 2020-04-03 21:50:31 +0800 | [diff] [blame] | 3847 | EXPECT_EQ(chassis.size(), 2); |
Shawn McCarney | 0e8c68a | 2020-03-27 01:44:48 -0500 | [diff] [blame] | 3848 | } |
| 3849 | |
| 3850 | // Test where fails: Element is not an object |
| 3851 | try |
| 3852 | { |
| 3853 | const json element = R"( [ "0xFF", "0x01" ] )"_json; |
| 3854 | parseRoot(element); |
| 3855 | ADD_FAILURE() << "Should not have reached this line."; |
| 3856 | } |
| 3857 | catch (const std::invalid_argument& e) |
| 3858 | { |
| 3859 | EXPECT_STREQ(e.what(), "Element is not an object"); |
| 3860 | } |
| 3861 | |
| 3862 | // Test where fails: chassis property not specified |
| 3863 | try |
| 3864 | { |
| 3865 | const json element = R"( |
| 3866 | { |
| 3867 | "rules": [ |
| 3868 | { |
| 3869 | "id": "set_voltage_rule", |
| 3870 | "actions": [ |
| 3871 | { "pmbus_write_vout_command": { "format": "linear" } } |
| 3872 | ] |
| 3873 | } |
| 3874 | ] |
| 3875 | } |
| 3876 | )"_json; |
| 3877 | parseRoot(element); |
| 3878 | ADD_FAILURE() << "Should not have reached this line."; |
| 3879 | } |
| 3880 | catch (const std::invalid_argument& e) |
| 3881 | { |
| 3882 | EXPECT_STREQ(e.what(), "Required property missing: chassis"); |
| 3883 | } |
| 3884 | |
| 3885 | // Test where fails: Invalid property specified |
| 3886 | try |
| 3887 | { |
| 3888 | const json element = R"( |
| 3889 | { |
| 3890 | "remarks": [ "Config file for a FooBar one-chassis system" ], |
| 3891 | "chassis": [ |
| 3892 | { "number": 1 } |
| 3893 | ] |
| 3894 | } |
| 3895 | )"_json; |
| 3896 | parseRoot(element); |
| 3897 | ADD_FAILURE() << "Should not have reached this line."; |
| 3898 | } |
| 3899 | catch (const std::invalid_argument& e) |
| 3900 | { |
| 3901 | EXPECT_STREQ(e.what(), "Element contains an invalid property"); |
| 3902 | } |
| 3903 | } |
| 3904 | |
| 3905 | TEST(ConfigFileParserTests, ParseRule) |
| 3906 | { |
| 3907 | // Test where works: comments property specified |
| 3908 | { |
| 3909 | const json element = R"( |
| 3910 | { |
| 3911 | "comments": [ "Set voltage rule" ], |
| 3912 | "id": "set_voltage_rule", |
| 3913 | "actions": [ |
| 3914 | { "pmbus_write_vout_command": { "volts": 1.01, "format": "linear" } }, |
| 3915 | { "pmbus_write_vout_command": { "volts": 1.03, "format": "linear" } } |
| 3916 | ] |
| 3917 | } |
| 3918 | )"_json; |
| 3919 | std::unique_ptr<Rule> rule = parseRule(element); |
| 3920 | EXPECT_EQ(rule->getID(), "set_voltage_rule"); |
| 3921 | EXPECT_EQ(rule->getActions().size(), 2); |
| 3922 | } |
| 3923 | |
| 3924 | // Test where works: comments property not specified |
| 3925 | { |
| 3926 | const json element = R"( |
| 3927 | { |
| 3928 | "id": "set_voltage_rule", |
| 3929 | "actions": [ |
| 3930 | { "pmbus_write_vout_command": { "volts": 1.01, "format": "linear" } }, |
| 3931 | { "pmbus_write_vout_command": { "volts": 1.03, "format": "linear" } }, |
| 3932 | { "pmbus_write_vout_command": { "volts": 1.05, "format": "linear" } } |
| 3933 | ] |
| 3934 | } |
| 3935 | )"_json; |
| 3936 | std::unique_ptr<Rule> rule = parseRule(element); |
| 3937 | EXPECT_EQ(rule->getID(), "set_voltage_rule"); |
| 3938 | EXPECT_EQ(rule->getActions().size(), 3); |
| 3939 | } |
| 3940 | |
| 3941 | // Test where fails: Element is not an object |
| 3942 | try |
| 3943 | { |
| 3944 | const json element = R"( [ "0xFF", "0x01" ] )"_json; |
| 3945 | parseRule(element); |
| 3946 | ADD_FAILURE() << "Should not have reached this line."; |
| 3947 | } |
| 3948 | catch (const std::invalid_argument& e) |
| 3949 | { |
| 3950 | EXPECT_STREQ(e.what(), "Element is not an object"); |
| 3951 | } |
| 3952 | |
| 3953 | // Test where fails: id property not specified |
| 3954 | try |
| 3955 | { |
| 3956 | const json element = R"( |
| 3957 | { |
| 3958 | "actions": [ |
| 3959 | { "pmbus_write_vout_command": { "volts": 1.01, "format": "linear" } } |
| 3960 | ] |
| 3961 | } |
| 3962 | )"_json; |
| 3963 | parseRule(element); |
| 3964 | ADD_FAILURE() << "Should not have reached this line."; |
| 3965 | } |
| 3966 | catch (const std::invalid_argument& e) |
| 3967 | { |
| 3968 | EXPECT_STREQ(e.what(), "Required property missing: id"); |
| 3969 | } |
| 3970 | |
| 3971 | // Test where fails: id property is invalid |
| 3972 | try |
| 3973 | { |
| 3974 | const json element = R"( |
| 3975 | { |
| 3976 | "id": "", |
| 3977 | "actions": [ |
| 3978 | { "pmbus_write_vout_command": { "volts": 1.01, "format": "linear" } } |
| 3979 | ] |
| 3980 | } |
| 3981 | )"_json; |
| 3982 | parseRule(element); |
| 3983 | ADD_FAILURE() << "Should not have reached this line."; |
| 3984 | } |
| 3985 | catch (const std::invalid_argument& e) |
| 3986 | { |
| 3987 | EXPECT_STREQ(e.what(), "Element contains an empty string"); |
| 3988 | } |
| 3989 | |
| 3990 | // Test where fails: actions property not specified |
| 3991 | try |
| 3992 | { |
| 3993 | const json element = R"( |
| 3994 | { |
| 3995 | "comments": [ "Set voltage rule" ], |
| 3996 | "id": "set_voltage_rule" |
| 3997 | } |
| 3998 | )"_json; |
| 3999 | parseRule(element); |
| 4000 | ADD_FAILURE() << "Should not have reached this line."; |
| 4001 | } |
| 4002 | catch (const std::invalid_argument& e) |
| 4003 | { |
| 4004 | EXPECT_STREQ(e.what(), "Required property missing: actions"); |
| 4005 | } |
| 4006 | |
| 4007 | // Test where fails: actions property is invalid |
| 4008 | try |
| 4009 | { |
| 4010 | const json element = R"( |
| 4011 | { |
| 4012 | "id": "set_voltage_rule", |
| 4013 | "actions": true |
| 4014 | } |
| 4015 | )"_json; |
| 4016 | parseRule(element); |
| 4017 | ADD_FAILURE() << "Should not have reached this line."; |
| 4018 | } |
| 4019 | catch (const std::invalid_argument& e) |
| 4020 | { |
| 4021 | EXPECT_STREQ(e.what(), "Element is not an array"); |
| 4022 | } |
| 4023 | |
| 4024 | // Test where fails: Invalid property specified |
| 4025 | try |
| 4026 | { |
| 4027 | const json element = R"( |
| 4028 | { |
| 4029 | "remarks": [ "Set voltage rule" ], |
| 4030 | "id": "set_voltage_rule", |
| 4031 | "actions": [ |
| 4032 | { "pmbus_write_vout_command": { "volts": 1.01, "format": "linear" } } |
| 4033 | ] |
| 4034 | } |
| 4035 | )"_json; |
| 4036 | parseRule(element); |
| 4037 | ADD_FAILURE() << "Should not have reached this line."; |
| 4038 | } |
| 4039 | catch (const std::invalid_argument& e) |
| 4040 | { |
| 4041 | EXPECT_STREQ(e.what(), "Element contains an invalid property"); |
| 4042 | } |
| 4043 | } |
| 4044 | |
| 4045 | TEST(ConfigFileParserTests, ParseRuleArray) |
| 4046 | { |
| 4047 | // Test where works |
| 4048 | { |
| 4049 | const json element = R"( |
| 4050 | [ |
| 4051 | { |
| 4052 | "id": "set_voltage_rule1", |
| 4053 | "actions": [ |
| 4054 | { "pmbus_write_vout_command": { "volts": 1.01, "format": "linear" } } |
| 4055 | ] |
| 4056 | }, |
| 4057 | { |
| 4058 | "id": "set_voltage_rule2", |
| 4059 | "actions": [ |
| 4060 | { "pmbus_write_vout_command": { "volts": 1.01, "format": "linear" } }, |
| 4061 | { "pmbus_write_vout_command": { "volts": 1.11, "format": "linear" } } |
| 4062 | ] |
| 4063 | } |
| 4064 | ] |
| 4065 | )"_json; |
| 4066 | std::vector<std::unique_ptr<Rule>> rules = parseRuleArray(element); |
| 4067 | EXPECT_EQ(rules.size(), 2); |
| 4068 | EXPECT_EQ(rules[0]->getID(), "set_voltage_rule1"); |
| 4069 | EXPECT_EQ(rules[0]->getActions().size(), 1); |
| 4070 | EXPECT_EQ(rules[1]->getID(), "set_voltage_rule2"); |
| 4071 | EXPECT_EQ(rules[1]->getActions().size(), 2); |
| 4072 | } |
| 4073 | |
| 4074 | // Test where fails: Element is not an array |
| 4075 | try |
| 4076 | { |
| 4077 | const json element = R"( { "id": "set_voltage_rule" } )"_json; |
| 4078 | parseRuleArray(element); |
| 4079 | ADD_FAILURE() << "Should not have reached this line."; |
| 4080 | } |
| 4081 | catch (const std::invalid_argument& e) |
| 4082 | { |
| 4083 | EXPECT_STREQ(e.what(), "Element is not an array"); |
| 4084 | } |
| 4085 | } |
| 4086 | |
Bob King | 33e7eaa | 2020-04-01 18:09:34 +0800 | [diff] [blame] | 4087 | TEST(ConfigFileParserTests, ParseRuleIDOrActionsProperty) |
| 4088 | { |
| 4089 | // Test where works: actions specified |
| 4090 | { |
| 4091 | const json element = R"( |
| 4092 | { |
| 4093 | "actions": [ |
| 4094 | { "pmbus_write_vout_command": { "format": "linear" } }, |
| 4095 | { "run_rule": "set_voltage_rule" } |
| 4096 | ] |
| 4097 | } |
| 4098 | )"_json; |
| 4099 | std::vector<std::unique_ptr<Action>> actions = |
| 4100 | parseRuleIDOrActionsProperty(element); |
| 4101 | EXPECT_EQ(actions.size(), 2); |
| 4102 | } |
| 4103 | |
| 4104 | // Test where works: rule_id specified |
| 4105 | { |
| 4106 | const json element = R"( |
| 4107 | { |
| 4108 | "rule_id": "set_voltage_rule" |
| 4109 | } |
| 4110 | )"_json; |
| 4111 | std::vector<std::unique_ptr<Action>> actions = |
| 4112 | parseRuleIDOrActionsProperty(element); |
| 4113 | EXPECT_EQ(actions.size(), 1); |
| 4114 | } |
| 4115 | |
| 4116 | // Test where fails: Element is not an object |
| 4117 | try |
| 4118 | { |
| 4119 | const json element = R"( [ "foo", "bar" ] )"_json; |
| 4120 | parseRuleIDOrActionsProperty(element); |
| 4121 | ADD_FAILURE() << "Should not have reached this line."; |
| 4122 | } |
| 4123 | catch (const std::invalid_argument& e) |
| 4124 | { |
| 4125 | EXPECT_STREQ(e.what(), "Element is not an object"); |
| 4126 | } |
| 4127 | |
| 4128 | // Test where fails: rule_id is invalid |
| 4129 | try |
| 4130 | { |
| 4131 | const json element = R"( |
| 4132 | { "rule_id": 1 } |
| 4133 | )"_json; |
| 4134 | parseRuleIDOrActionsProperty(element); |
| 4135 | ADD_FAILURE() << "Should not have reached this line."; |
| 4136 | } |
| 4137 | catch (const std::invalid_argument& e) |
| 4138 | { |
| 4139 | EXPECT_STREQ(e.what(), "Element is not a string"); |
| 4140 | } |
| 4141 | |
| 4142 | // Test where fails: actions is invalid |
| 4143 | try |
| 4144 | { |
| 4145 | const json element = R"( |
| 4146 | { "actions": 1 } |
| 4147 | )"_json; |
| 4148 | parseRuleIDOrActionsProperty(element); |
| 4149 | ADD_FAILURE() << "Should not have reached this line."; |
| 4150 | } |
| 4151 | catch (const std::invalid_argument& e) |
| 4152 | { |
| 4153 | EXPECT_STREQ(e.what(), "Element is not an array"); |
| 4154 | } |
| 4155 | |
| 4156 | // Test where fails: Neither rule_id nor actions specified |
| 4157 | try |
| 4158 | { |
| 4159 | const json element = R"( |
| 4160 | { |
| 4161 | "volts": 1.03 |
| 4162 | } |
| 4163 | )"_json; |
| 4164 | parseRuleIDOrActionsProperty(element); |
| 4165 | ADD_FAILURE() << "Should not have reached this line."; |
| 4166 | } |
| 4167 | catch (const std::invalid_argument& e) |
| 4168 | { |
| 4169 | EXPECT_STREQ(e.what(), "Invalid property combination: Must contain " |
| 4170 | "either rule_id or actions"); |
| 4171 | } |
| 4172 | |
| 4173 | // Test where fails: Both rule_id and actions specified |
| 4174 | try |
| 4175 | { |
| 4176 | const json element = R"( |
| 4177 | { |
| 4178 | "volts": 1.03, |
| 4179 | "rule_id": "set_voltage_rule", |
| 4180 | "actions": [ |
| 4181 | { |
| 4182 | "pmbus_write_vout_command": { |
| 4183 | "format": "linear" |
| 4184 | } |
| 4185 | } |
| 4186 | ] |
| 4187 | } |
| 4188 | )"_json; |
| 4189 | parseRuleIDOrActionsProperty(element); |
| 4190 | ADD_FAILURE() << "Should not have reached this line."; |
| 4191 | } |
| 4192 | catch (const std::invalid_argument& e) |
| 4193 | { |
| 4194 | EXPECT_STREQ(e.what(), "Invalid property combination: Must contain " |
| 4195 | "either rule_id or actions"); |
| 4196 | } |
| 4197 | } |
| 4198 | |
Bob King | 315b0b6 | 2020-04-03 21:47:58 +0800 | [diff] [blame] | 4199 | TEST(ConfigFileParserTests, ParseRunRule) |
| 4200 | { |
| 4201 | // Test where works |
| 4202 | { |
| 4203 | const json element = "vdd_regulator"; |
| 4204 | std::unique_ptr<RunRuleAction> action = parseRunRule(element); |
| 4205 | EXPECT_EQ(action->getRuleID(), "vdd_regulator"); |
| 4206 | } |
| 4207 | |
| 4208 | // Test where fails: Element is not a string |
| 4209 | try |
| 4210 | { |
| 4211 | const json element = 1; |
| 4212 | parseRunRule(element); |
| 4213 | ADD_FAILURE() << "Should not have reached this line."; |
| 4214 | } |
| 4215 | catch (const std::invalid_argument& e) |
| 4216 | { |
| 4217 | EXPECT_STREQ(e.what(), "Element is not a string"); |
| 4218 | } |
| 4219 | |
| 4220 | // Test where fails: Empty string |
| 4221 | try |
| 4222 | { |
| 4223 | const json element = ""; |
| 4224 | parseRunRule(element); |
| 4225 | ADD_FAILURE() << "Should not have reached this line."; |
| 4226 | } |
| 4227 | catch (const std::invalid_argument& e) |
| 4228 | { |
| 4229 | EXPECT_STREQ(e.what(), "Element contains an empty string"); |
| 4230 | } |
| 4231 | } |
| 4232 | |
Bob King | 8461488 | 2020-04-30 13:13:48 +0800 | [diff] [blame] | 4233 | TEST(ConfigFileParserTests, ParseSensorDataFormat) |
| 4234 | { |
| 4235 | // Test where works: linear_11 |
| 4236 | { |
| 4237 | const json element = "linear_11"; |
| 4238 | pmbus_utils::SensorDataFormat value = parseSensorDataFormat(element); |
| 4239 | pmbus_utils::SensorDataFormat format = |
| 4240 | pmbus_utils::SensorDataFormat::linear_11; |
| 4241 | EXPECT_EQ(value, format); |
| 4242 | } |
| 4243 | |
| 4244 | // Test where works: linear_16 |
| 4245 | { |
| 4246 | const json element = "linear_16"; |
| 4247 | pmbus_utils::SensorDataFormat value = parseSensorDataFormat(element); |
| 4248 | pmbus_utils::SensorDataFormat format = |
| 4249 | pmbus_utils::SensorDataFormat::linear_16; |
| 4250 | EXPECT_EQ(value, format); |
| 4251 | } |
| 4252 | |
| 4253 | // Test where fails: Element is not a sensor data format |
| 4254 | try |
| 4255 | { |
| 4256 | const json element = "foo"; |
| 4257 | parseSensorDataFormat(element); |
| 4258 | ADD_FAILURE() << "Should not have reached this line."; |
| 4259 | } |
| 4260 | catch (const std::invalid_argument& e) |
| 4261 | { |
| 4262 | EXPECT_STREQ(e.what(), "Element is not a sensor data format"); |
| 4263 | } |
| 4264 | |
| 4265 | // Test where fails: Element is not a string |
| 4266 | try |
| 4267 | { |
| 4268 | const json element = R"( { "foo": "bar" } )"_json; |
| 4269 | parseSensorDataFormat(element); |
| 4270 | ADD_FAILURE() << "Should not have reached this line."; |
| 4271 | } |
| 4272 | catch (const std::invalid_argument& e) |
| 4273 | { |
| 4274 | EXPECT_STREQ(e.what(), "Element is not a string"); |
| 4275 | } |
| 4276 | } |
| 4277 | |
Bob King | a2f2a0d | 2020-04-09 13:32:14 +0800 | [diff] [blame] | 4278 | TEST(ConfigFileParserTests, ParseSensorMonitoring) |
| 4279 | { |
| 4280 | // Test where works: actions property specified |
| 4281 | { |
| 4282 | const json element = R"( |
| 4283 | { |
| 4284 | "actions": [ |
| 4285 | { "run_rule": "read_sensors_rule" } |
| 4286 | ] |
| 4287 | } |
| 4288 | )"_json; |
| 4289 | std::unique_ptr<SensorMonitoring> sensorMonitoring = |
| 4290 | parseSensorMonitoring(element); |
| 4291 | EXPECT_EQ(sensorMonitoring->getActions().size(), 1); |
| 4292 | } |
| 4293 | |
| 4294 | // Test where works: rule_id property specified |
| 4295 | { |
| 4296 | const json element = R"( |
| 4297 | { |
| 4298 | "comments": [ "comments property" ], |
| 4299 | "rule_id": "set_voltage_rule" |
| 4300 | } |
| 4301 | )"_json; |
| 4302 | std::unique_ptr<SensorMonitoring> sensorMonitoring = |
| 4303 | parseSensorMonitoring(element); |
| 4304 | EXPECT_EQ(sensorMonitoring->getActions().size(), 1); |
| 4305 | } |
| 4306 | |
| 4307 | // Test where fails: actions object is invalid |
| 4308 | try |
| 4309 | { |
| 4310 | const json element = R"( |
| 4311 | { |
| 4312 | "actions": 1 |
| 4313 | } |
| 4314 | )"_json; |
| 4315 | parseSensorMonitoring(element); |
| 4316 | ADD_FAILURE() << "Should not have reached this line."; |
| 4317 | } |
| 4318 | catch (const std::invalid_argument& e) |
| 4319 | { |
| 4320 | EXPECT_STREQ(e.what(), "Element is not an array"); |
| 4321 | } |
| 4322 | |
| 4323 | // Test where fails: rule_id value is invalid |
| 4324 | try |
| 4325 | { |
| 4326 | const json element = R"( |
| 4327 | { |
| 4328 | "rule_id": 1 |
| 4329 | } |
| 4330 | )"_json; |
| 4331 | parseSensorMonitoring(element); |
| 4332 | ADD_FAILURE() << "Should not have reached this line."; |
| 4333 | } |
| 4334 | catch (const std::invalid_argument& e) |
| 4335 | { |
| 4336 | EXPECT_STREQ(e.what(), "Element is not a string"); |
| 4337 | } |
| 4338 | |
| 4339 | // Test where fails: Required actions or rule_id property not specified |
| 4340 | try |
| 4341 | { |
| 4342 | const json element = R"( |
| 4343 | { |
| 4344 | "comments": [ "comments property" ] |
| 4345 | } |
| 4346 | )"_json; |
| 4347 | parseSensorMonitoring(element); |
| 4348 | ADD_FAILURE() << "Should not have reached this line."; |
| 4349 | } |
| 4350 | catch (const std::invalid_argument& e) |
| 4351 | { |
| 4352 | EXPECT_STREQ(e.what(), "Invalid property combination: Must contain " |
| 4353 | "either rule_id or actions"); |
| 4354 | } |
| 4355 | |
| 4356 | // Test where fails: Required actions or rule_id property both specified |
| 4357 | try |
| 4358 | { |
| 4359 | const json element = R"( |
| 4360 | { |
| 4361 | "rule_id": "set_voltage_rule", |
| 4362 | "actions": [ |
| 4363 | { "run_rule": "read_sensors_rule" } |
| 4364 | ] |
| 4365 | } |
| 4366 | )"_json; |
| 4367 | parseSensorMonitoring(element); |
| 4368 | ADD_FAILURE() << "Should not have reached this line."; |
| 4369 | } |
| 4370 | catch (const std::invalid_argument& e) |
| 4371 | { |
| 4372 | EXPECT_STREQ(e.what(), "Invalid property combination: Must contain " |
| 4373 | "either rule_id or actions"); |
| 4374 | } |
| 4375 | |
| 4376 | // Test where fails: Element is not an object |
| 4377 | try |
| 4378 | { |
| 4379 | const json element = R"( [ "foo", "bar" ] )"_json; |
| 4380 | parseSensorMonitoring(element); |
| 4381 | ADD_FAILURE() << "Should not have reached this line."; |
| 4382 | } |
| 4383 | catch (const std::invalid_argument& e) |
| 4384 | { |
| 4385 | EXPECT_STREQ(e.what(), "Element is not an object"); |
| 4386 | } |
| 4387 | |
| 4388 | // Test where fails: Invalid property specified |
| 4389 | try |
| 4390 | { |
| 4391 | const json element = R"( |
| 4392 | { |
| 4393 | "foo": "bar", |
| 4394 | "actions": [ |
| 4395 | { "run_rule": "read_sensors_rule" } |
| 4396 | ] |
| 4397 | } |
| 4398 | )"_json; |
| 4399 | parseSensorMonitoring(element); |
| 4400 | ADD_FAILURE() << "Should not have reached this line."; |
| 4401 | } |
| 4402 | catch (const std::invalid_argument& e) |
| 4403 | { |
| 4404 | EXPECT_STREQ(e.what(), "Element contains an invalid property"); |
| 4405 | } |
| 4406 | } |
| 4407 | |
Bob King | 8461488 | 2020-04-30 13:13:48 +0800 | [diff] [blame] | 4408 | TEST(ConfigFileParserTests, ParseSensorValueType) |
| 4409 | { |
| 4410 | // Test where works: iout |
| 4411 | { |
| 4412 | const json element = "iout"; |
| 4413 | pmbus_utils::SensorValueType value = parseSensorValueType(element); |
| 4414 | pmbus_utils::SensorValueType type = pmbus_utils::SensorValueType::iout; |
| 4415 | EXPECT_EQ(value, type); |
| 4416 | } |
| 4417 | |
| 4418 | // Test where works: iout_peak |
| 4419 | { |
| 4420 | const json element = "iout_peak"; |
| 4421 | pmbus_utils::SensorValueType value = parseSensorValueType(element); |
| 4422 | pmbus_utils::SensorValueType type = |
| 4423 | pmbus_utils::SensorValueType::iout_peak; |
| 4424 | EXPECT_EQ(value, type); |
| 4425 | } |
| 4426 | |
| 4427 | // Test where works: iout_valley |
| 4428 | { |
| 4429 | const json element = "iout_valley"; |
| 4430 | pmbus_utils::SensorValueType value = parseSensorValueType(element); |
| 4431 | pmbus_utils::SensorValueType type = |
| 4432 | pmbus_utils::SensorValueType::iout_valley; |
| 4433 | EXPECT_EQ(value, type); |
| 4434 | } |
| 4435 | |
| 4436 | // Test where works: pout |
| 4437 | { |
| 4438 | const json element = "pout"; |
| 4439 | pmbus_utils::SensorValueType value = parseSensorValueType(element); |
| 4440 | pmbus_utils::SensorValueType type = pmbus_utils::SensorValueType::pout; |
| 4441 | EXPECT_EQ(value, type); |
| 4442 | } |
| 4443 | |
| 4444 | // Test where works: temperature |
| 4445 | { |
| 4446 | const json element = "temperature"; |
| 4447 | pmbus_utils::SensorValueType value = parseSensorValueType(element); |
| 4448 | pmbus_utils::SensorValueType type = |
| 4449 | pmbus_utils::SensorValueType::temperature; |
| 4450 | EXPECT_EQ(value, type); |
| 4451 | } |
| 4452 | |
| 4453 | // Test where works: temperature_peak |
| 4454 | { |
| 4455 | const json element = "temperature_peak"; |
| 4456 | pmbus_utils::SensorValueType value = parseSensorValueType(element); |
| 4457 | pmbus_utils::SensorValueType type = |
| 4458 | pmbus_utils::SensorValueType::temperature_peak; |
| 4459 | EXPECT_EQ(value, type); |
| 4460 | } |
| 4461 | |
| 4462 | // Test where works: vout |
| 4463 | { |
| 4464 | const json element = "vout"; |
| 4465 | pmbus_utils::SensorValueType value = parseSensorValueType(element); |
| 4466 | pmbus_utils::SensorValueType type = pmbus_utils::SensorValueType::vout; |
| 4467 | EXPECT_EQ(value, type); |
| 4468 | } |
| 4469 | |
| 4470 | // Test where works: vout_peak |
| 4471 | { |
| 4472 | const json element = "vout_peak"; |
| 4473 | pmbus_utils::SensorValueType value = parseSensorValueType(element); |
| 4474 | pmbus_utils::SensorValueType type = |
| 4475 | pmbus_utils::SensorValueType::vout_peak; |
| 4476 | EXPECT_EQ(value, type); |
| 4477 | } |
| 4478 | |
| 4479 | // Test where works: vout_valley |
| 4480 | { |
| 4481 | const json element = "vout_valley"; |
| 4482 | pmbus_utils::SensorValueType value = parseSensorValueType(element); |
| 4483 | pmbus_utils::SensorValueType type = |
| 4484 | pmbus_utils::SensorValueType::vout_valley; |
| 4485 | EXPECT_EQ(value, type); |
| 4486 | } |
| 4487 | |
| 4488 | // Test where fails: Element is not a sensor value type |
| 4489 | try |
| 4490 | { |
| 4491 | const json element = "foo"; |
| 4492 | parseSensorValueType(element); |
| 4493 | ADD_FAILURE() << "Should not have reached this line."; |
| 4494 | } |
| 4495 | catch (const std::invalid_argument& e) |
| 4496 | { |
| 4497 | EXPECT_STREQ(e.what(), "Element is not a sensor value type"); |
| 4498 | } |
| 4499 | |
| 4500 | // Test where fails: Element is not a string |
| 4501 | try |
| 4502 | { |
| 4503 | const json element = R"( { "foo": "bar" } )"_json; |
| 4504 | parseSensorValueType(element); |
| 4505 | ADD_FAILURE() << "Should not have reached this line."; |
| 4506 | } |
| 4507 | catch (const std::invalid_argument& e) |
| 4508 | { |
| 4509 | EXPECT_STREQ(e.what(), "Element is not a string"); |
| 4510 | } |
| 4511 | } |
| 4512 | |
Bob King | 18a6850 | 2020-04-17 14:19:56 +0800 | [diff] [blame] | 4513 | TEST(ConfigFileParserTests, ParseSetDevice) |
| 4514 | { |
| 4515 | // Test where works |
| 4516 | { |
| 4517 | const json element = "regulator1"; |
| 4518 | std::unique_ptr<SetDeviceAction> action = parseSetDevice(element); |
| 4519 | EXPECT_EQ(action->getDeviceID(), "regulator1"); |
| 4520 | } |
| 4521 | |
| 4522 | // Test where fails: Element is not a string |
| 4523 | try |
| 4524 | { |
| 4525 | const json element = 1; |
| 4526 | parseSetDevice(element); |
| 4527 | ADD_FAILURE() << "Should not have reached this line."; |
| 4528 | } |
| 4529 | catch (const std::invalid_argument& e) |
| 4530 | { |
| 4531 | EXPECT_STREQ(e.what(), "Element is not a string"); |
| 4532 | } |
| 4533 | |
| 4534 | // Test where fails: Empty string |
| 4535 | try |
| 4536 | { |
| 4537 | const json element = ""; |
| 4538 | parseSetDevice(element); |
| 4539 | ADD_FAILURE() << "Should not have reached this line."; |
| 4540 | } |
| 4541 | catch (const std::invalid_argument& e) |
| 4542 | { |
| 4543 | EXPECT_STREQ(e.what(), "Element contains an empty string"); |
| 4544 | } |
| 4545 | } |
| 4546 | |
Shawn McCarney | 0e8c68a | 2020-03-27 01:44:48 -0500 | [diff] [blame] | 4547 | TEST(ConfigFileParserTests, ParseString) |
| 4548 | { |
| 4549 | // Test where works: Empty string |
| 4550 | { |
| 4551 | const json element = ""; |
| 4552 | std::string value = parseString(element, true); |
| 4553 | EXPECT_EQ(value, ""); |
| 4554 | } |
| 4555 | |
| 4556 | // Test where works: Non-empty string |
| 4557 | { |
| 4558 | const json element = "vdd_regulator"; |
| 4559 | std::string value = parseString(element, false); |
| 4560 | EXPECT_EQ(value, "vdd_regulator"); |
| 4561 | } |
| 4562 | |
| 4563 | // Test where fails: Element is not a string |
| 4564 | try |
| 4565 | { |
| 4566 | const json element = R"( { "foo": "bar" } )"_json; |
| 4567 | parseString(element); |
| 4568 | ADD_FAILURE() << "Should not have reached this line."; |
| 4569 | } |
| 4570 | catch (const std::invalid_argument& e) |
| 4571 | { |
| 4572 | EXPECT_STREQ(e.what(), "Element is not a string"); |
| 4573 | } |
| 4574 | |
| 4575 | // Test where fails: Empty string |
| 4576 | try |
| 4577 | { |
| 4578 | const json element = ""; |
| 4579 | parseString(element); |
| 4580 | ADD_FAILURE() << "Should not have reached this line."; |
| 4581 | } |
| 4582 | catch (const std::invalid_argument& e) |
| 4583 | { |
| 4584 | EXPECT_STREQ(e.what(), "Element contains an empty string"); |
| 4585 | } |
| 4586 | } |
| 4587 | |
Bob King | f617f89 | 2020-03-30 19:03:35 +0800 | [diff] [blame] | 4588 | TEST(ConfigFileParserTests, ParseUint8) |
| 4589 | { |
| 4590 | // Test where works: 0 |
| 4591 | { |
| 4592 | const json element = R"( 0 )"_json; |
| 4593 | uint8_t value = parseUint8(element); |
| 4594 | EXPECT_EQ(value, 0); |
| 4595 | } |
| 4596 | |
| 4597 | // Test where works: UINT8_MAX |
| 4598 | { |
| 4599 | const json element = R"( 255 )"_json; |
| 4600 | uint8_t value = parseUint8(element); |
| 4601 | EXPECT_EQ(value, 255); |
| 4602 | } |
| 4603 | |
| 4604 | // Test where fails: Element is not an integer |
| 4605 | try |
| 4606 | { |
| 4607 | const json element = R"( 1.03 )"_json; |
| 4608 | parseUint8(element); |
| 4609 | ADD_FAILURE() << "Should not have reached this line."; |
| 4610 | } |
| 4611 | catch (const std::invalid_argument& e) |
| 4612 | { |
| 4613 | EXPECT_STREQ(e.what(), "Element is not an integer"); |
| 4614 | } |
| 4615 | |
| 4616 | // Test where fails: Value < 0 |
| 4617 | try |
| 4618 | { |
| 4619 | const json element = R"( -1 )"_json; |
| 4620 | parseUint8(element); |
| 4621 | ADD_FAILURE() << "Should not have reached this line."; |
| 4622 | } |
| 4623 | catch (const std::invalid_argument& e) |
| 4624 | { |
| 4625 | EXPECT_STREQ(e.what(), "Element is not an 8-bit unsigned integer"); |
| 4626 | } |
| 4627 | |
| 4628 | // Test where fails: Value > UINT8_MAX |
| 4629 | try |
| 4630 | { |
| 4631 | const json element = R"( 256 )"_json; |
| 4632 | parseUint8(element); |
| 4633 | ADD_FAILURE() << "Should not have reached this line."; |
| 4634 | } |
| 4635 | catch (const std::invalid_argument& e) |
| 4636 | { |
| 4637 | EXPECT_STREQ(e.what(), "Element is not an 8-bit unsigned integer"); |
| 4638 | } |
| 4639 | } |
| 4640 | |
Bob King | 0e70113 | 2020-04-03 21:50:31 +0800 | [diff] [blame] | 4641 | TEST(ConfigFileParserTests, ParseUnsignedInteger) |
| 4642 | { |
| 4643 | // Test where works: 1 |
| 4644 | { |
| 4645 | const json element = R"( 1 )"_json; |
| 4646 | unsigned int value = parseUnsignedInteger(element); |
| 4647 | EXPECT_EQ(value, 1); |
| 4648 | } |
| 4649 | |
| 4650 | // Test where fails: Element is not an integer |
| 4651 | try |
| 4652 | { |
| 4653 | const json element = R"( 1.5 )"_json; |
| 4654 | parseUnsignedInteger(element); |
| 4655 | ADD_FAILURE() << "Should not have reached this line."; |
| 4656 | } |
| 4657 | catch (const std::invalid_argument& e) |
| 4658 | { |
| 4659 | EXPECT_STREQ(e.what(), "Element is not an unsigned integer"); |
| 4660 | } |
| 4661 | |
| 4662 | // Test where fails: Value < 0 |
| 4663 | try |
| 4664 | { |
| 4665 | const json element = R"( -1 )"_json; |
| 4666 | parseUnsignedInteger(element); |
| 4667 | ADD_FAILURE() << "Should not have reached this line."; |
| 4668 | } |
| 4669 | catch (const std::invalid_argument& e) |
| 4670 | { |
| 4671 | EXPECT_STREQ(e.what(), "Element is not an unsigned integer"); |
| 4672 | } |
| 4673 | } |
| 4674 | |
Bob King | 8461488 | 2020-04-30 13:13:48 +0800 | [diff] [blame] | 4675 | TEST(ConfigFileParserTests, ParseVoutDataFormat) |
| 4676 | { |
| 4677 | // Test where works: linear |
| 4678 | { |
| 4679 | const json element = "linear"; |
| 4680 | pmbus_utils::VoutDataFormat value = parseVoutDataFormat(element); |
| 4681 | pmbus_utils::VoutDataFormat format = |
| 4682 | pmbus_utils::VoutDataFormat::linear; |
| 4683 | EXPECT_EQ(value, format); |
| 4684 | } |
| 4685 | |
| 4686 | // Test where works: vid |
| 4687 | { |
| 4688 | const json element = "vid"; |
| 4689 | pmbus_utils::VoutDataFormat value = parseVoutDataFormat(element); |
| 4690 | pmbus_utils::VoutDataFormat format = pmbus_utils::VoutDataFormat::vid; |
| 4691 | EXPECT_EQ(value, format); |
| 4692 | } |
| 4693 | |
| 4694 | // Test where works: direct |
| 4695 | { |
| 4696 | const json element = "direct"; |
| 4697 | pmbus_utils::VoutDataFormat value = parseVoutDataFormat(element); |
| 4698 | pmbus_utils::VoutDataFormat format = |
| 4699 | pmbus_utils::VoutDataFormat::direct; |
| 4700 | EXPECT_EQ(value, format); |
| 4701 | } |
| 4702 | |
| 4703 | // Test where works: ieee |
| 4704 | { |
| 4705 | const json element = "ieee"; |
| 4706 | pmbus_utils::VoutDataFormat value = parseVoutDataFormat(element); |
| 4707 | pmbus_utils::VoutDataFormat format = pmbus_utils::VoutDataFormat::ieee; |
| 4708 | EXPECT_EQ(value, format); |
| 4709 | } |
| 4710 | |
| 4711 | // Test where fails: Element is not a vout data format |
| 4712 | try |
| 4713 | { |
| 4714 | const json element = "foo"; |
| 4715 | parseVoutDataFormat(element); |
| 4716 | ADD_FAILURE() << "Should not have reached this line."; |
| 4717 | } |
| 4718 | catch (const std::invalid_argument& e) |
| 4719 | { |
| 4720 | EXPECT_STREQ(e.what(), "Element is not a vout data format"); |
| 4721 | } |
| 4722 | |
| 4723 | // Test where fails: Element is not a string |
| 4724 | try |
| 4725 | { |
| 4726 | const json element = R"( { "foo": "bar" } )"_json; |
| 4727 | parseVoutDataFormat(element); |
| 4728 | ADD_FAILURE() << "Should not have reached this line."; |
| 4729 | } |
| 4730 | catch (const std::invalid_argument& e) |
| 4731 | { |
| 4732 | EXPECT_STREQ(e.what(), "Element is not a string"); |
| 4733 | } |
| 4734 | } |
| 4735 | |
Shawn McCarney | 0e8c68a | 2020-03-27 01:44:48 -0500 | [diff] [blame] | 4736 | TEST(ConfigFileParserTests, VerifyIsArray) |
| 4737 | { |
| 4738 | // Test where element is an array |
| 4739 | try |
| 4740 | { |
| 4741 | const json element = R"( [ "foo", "bar" ] )"_json; |
| 4742 | verifyIsArray(element); |
| 4743 | } |
| 4744 | catch (const std::exception& e) |
| 4745 | { |
| 4746 | ADD_FAILURE() << "Should not have caught exception."; |
| 4747 | } |
| 4748 | |
| 4749 | // Test where element is not an array |
| 4750 | try |
| 4751 | { |
| 4752 | const json element = R"( { "foo": "bar" } )"_json; |
| 4753 | verifyIsArray(element); |
| 4754 | ADD_FAILURE() << "Should not have reached this line."; |
| 4755 | } |
| 4756 | catch (const std::invalid_argument& e) |
| 4757 | { |
| 4758 | EXPECT_STREQ(e.what(), "Element is not an array"); |
| 4759 | } |
| 4760 | } |
| 4761 | |
| 4762 | TEST(ConfigFileParserTests, VerifyIsObject) |
| 4763 | { |
| 4764 | // Test where element is an object |
| 4765 | try |
| 4766 | { |
| 4767 | const json element = R"( { "foo": "bar" } )"_json; |
| 4768 | verifyIsObject(element); |
| 4769 | } |
| 4770 | catch (const std::exception& e) |
| 4771 | { |
| 4772 | ADD_FAILURE() << "Should not have caught exception."; |
| 4773 | } |
| 4774 | |
| 4775 | // Test where element is not an object |
| 4776 | try |
| 4777 | { |
| 4778 | const json element = R"( [ "foo", "bar" ] )"_json; |
| 4779 | verifyIsObject(element); |
| 4780 | ADD_FAILURE() << "Should not have reached this line."; |
| 4781 | } |
| 4782 | catch (const std::invalid_argument& e) |
| 4783 | { |
| 4784 | EXPECT_STREQ(e.what(), "Element is not an object"); |
| 4785 | } |
| 4786 | } |
| 4787 | |
| 4788 | TEST(ConfigFileParserTests, VerifyPropertyCount) |
| 4789 | { |
| 4790 | // Test where element has expected number of properties |
| 4791 | try |
| 4792 | { |
| 4793 | const json element = R"( |
| 4794 | { |
| 4795 | "comments": [ "Set voltage rule" ], |
| 4796 | "id": "set_voltage_rule" |
| 4797 | } |
| 4798 | )"_json; |
| 4799 | verifyPropertyCount(element, 2); |
| 4800 | } |
| 4801 | catch (const std::exception& e) |
| 4802 | { |
| 4803 | ADD_FAILURE() << "Should not have caught exception."; |
| 4804 | } |
| 4805 | |
| 4806 | // Test where element has unexpected number of properties |
| 4807 | try |
| 4808 | { |
| 4809 | const json element = R"( |
| 4810 | { |
| 4811 | "comments": [ "Set voltage rule" ], |
| 4812 | "id": "set_voltage_rule", |
| 4813 | "foo": 1.3 |
| 4814 | } |
| 4815 | )"_json; |
| 4816 | verifyPropertyCount(element, 2); |
| 4817 | ADD_FAILURE() << "Should not have reached this line."; |
| 4818 | } |
| 4819 | catch (const std::invalid_argument& e) |
| 4820 | { |
| 4821 | EXPECT_STREQ(e.what(), "Element contains an invalid property"); |
| 4822 | } |
| 4823 | } |