obmcutil

#!/bin/sh -e

set -euo pipefail

OPTS="bmcstate,bootprogress,chassisoff,chassison,chassisstate,hoststate,\
power,poweroff,poweron,state,status"

USAGE="Usage: obmcutil [-h] [--wait]
                {$OPTS}"

INTERFACE_ROOT=xyz.openbmc_project
STATE_INTERFACE=$INTERFACE_ROOT.State

OBJECT_ROOT=/xyz/openbmc_project
STATE_OBJECT=$OBJECT_ROOT/state

## NOTE: The following global variables are used only in the run_timeout cmd.
## By declaring these globally instead of passing them through the
## intermediary functions, which may not be "best practice", the readability
## and cleanliness of the code should at least be increased.

# The command passed in to be executed (e.g. poweron/off, status, etc.)
# This will be be used in some instances of error reporting
G_ORIG_CMD=
# The state an interface should be in after executing the requested command.
G_REQUESTED_STATE=
# The query to run during a poweron/off or chassison/off to check that
# the requested state (G_REQUESTED_STATE) of the interface has been reached.
G_QUERY=
# Wait the set period of time for state transitions to be successful before
# continuing on with the program or reporting an error if timeout reached.
G_WAIT=

print_help ()
{
    echo "$USAGE"
    echo ""
    echo "positional arguments:"
    echo "  {$OPTS}"
    echo ""
    echo "optional arguments:"
    echo "  -h, --help          show this help message and exit"
    echo "  -w, --wait          block until state transition succeeds or fails"
    exit 0
}

run_timeout ()
{
    local timeout="$1"; shift
    local cmd="$@"

    $cmd

    # Run a background query for the transition to the expected state
    # This will be killed if the transition doesn't succeed within
    # a timeout period.
    (
        while ! grep -q $G_REQUESTED_STATE <<< $(handle_cmd $G_QUERY) ; do
            sleep 1
        done
    ) &
    child=$!

    # Could be bad if process is killed before 'timeout' occurs if
    # transition doesn't succeed.
    trap -- "" SIGTERM

    # Workaround for lack of 'timeout' command.
    (
        sleep $timeout
        kill $child
    ) > /dev/null 2>&1 &

    if ! wait $child; then
        echo "Unable to confirm '$G_ORIG_CMD' success" \
        "within timeout period (${timeout}s)"
    fi
}

run_cmd ()
{
    local cmd="$@";

    if [ -n "$G_WAIT" ]; then
        run_timeout $G_WAIT "$cmd"
    else
        $cmd
    fi
}

set_property ()
{
    run_cmd busctl set-property "$@"
}

get_property ()
{
    G_WAIT=""
    run_cmd busctl get-property "$@"
}

state_query ()
{
    local state=$(get_property "$@" | cut -d '"' -f2)
    printf "%-20s: %s\n" $4 $state
}

print_usage_err ()
{
    echo "ERROR: $1" >&2
    echo "$USAGE"
    exit 1
}

handle_cmd ()
{
    case "$1" in
        chassisoff)
            OBJECT=$STATE_OBJECT/chassis0
            SERVICE=$(mapper get-service $OBJECT)
            INTERFACE=$STATE_INTERFACE.Chassis
            PROPERTY=RequestedPowerTransition
            VALUE=$INTERFACE.Transition.Off
            G_REQUESTED_STATE=$INTERFACE.PowerState.Off
            G_QUERY="chassisstate"
            set_property $SERVICE $OBJECT $INTERFACE $PROPERTY "s" $VALUE
            ;;
        chassison)
            OBJECT=$STATE_OBJECT/chassis0
            SERVICE=$(mapper get-service $OBJECT)
            INTERFACE=$STATE_INTERFACE.Chassis
            PROPERTY=RequestedPowerTransition
            VALUE=$INTERFACE.Transition.On
            G_REQUESTED_STATE=$INTERFACE.PowerState.On
            G_QUERY="chassisstate"
            set_property $SERVICE $OBJECT $INTERFACE $PROPERTY "s" $VALUE
            ;;
        poweroff)
            OBJECT=$STATE_OBJECT/host0
            SERVICE=$(mapper get-service $OBJECT)
            INTERFACE=$STATE_INTERFACE.Host
            PROPERTY=RequestedHostTransition
            VALUE=$INTERFACE.Transition.Off
            G_REQUESTED_STATE=$INTERFACE.HostState.Off
            G_QUERY="hoststate"
            set_property $SERVICE $OBJECT $INTERFACE $PROPERTY "s" $VALUE
            ;;
        poweron)
            OBJECT=$STATE_OBJECT/host0
            SERVICE=$(mapper get-service $OBJECT)
            INTERFACE=$STATE_INTERFACE.Host
            PROPERTY=RequestedHostTransition
            VALUE=$INTERFACE.Transition.On
            G_REQUESTED_STATE=$INTERFACE.HostState.Running
            G_QUERY="hoststate"
            set_property $SERVICE $OBJECT $INTERFACE $PROPERTY "s" $VALUE
            ;;
        bmcstate)
            OBJECT=$STATE_OBJECT/bmc0
            SERVICE=$(mapper get-service $OBJECT)
            INTERFACE=$STATE_INTERFACE.BMC
            PROPERTY=CurrentBMCState
            state_query $SERVICE $OBJECT $INTERFACE $PROPERTY
            ;;
        chassisstate)
            OBJECT=$STATE_OBJECT/chassis0
            SERVICE=$(mapper get-service $OBJECT)
            INTERFACE=$STATE_INTERFACE.Chassis
            PROPERTY=CurrentPowerState
            state_query $SERVICE $OBJECT $INTERFACE $PROPERTY
            ;;
        hoststate)
            OBJECT=$STATE_OBJECT/host0
            SERVICE=$(mapper get-service $OBJECT)
            INTERFACE=$STATE_INTERFACE.Host
            PROPERTY=CurrentHostState
            state_query $SERVICE $OBJECT $INTERFACE $PROPERTY
            ;;
        state|status)
            for query in bmcstate chassisstate hoststate
            do
                handle_cmd $query
            done
            ;;
        bootprogress)
            OBJECT=$STATE_OBJECT/host0
            SERVICE=$(mapper get-service $OBJECT)
            INTERFACE=$STATE_INTERFACE.Boot.Progress
            PROPERTY=BootProgress
            state_query $SERVICE $OBJECT $INTERFACE $PROPERTY
            ;;
        power)
            OBJECT=/org/openbmc/control/power0
            SERVICE=$(mapper get-service $OBJECT)
            INTERFACE=org.openbmc.control.Power
            for property in pgood state pgood_timeout
            do
                # get_property can potentially return several
                # different formats of values, so we do the parsing outside
                # of get_property depending on the query. These queries
                # return 'i VALUE' formatted strings.
                STATE=$(get_property $SERVICE $OBJECT $INTERFACE $property \
                    | sed 's/i[ ^I]*//')
                printf "%s = %s\n" $property $STATE
            done
            ;;
        *)
            print_usage_err "Invalid command '$1'"
            ;;
    esac
}

for arg in "$@"; do
    case $arg in
        -w|--wait)
            G_WAIT=30
            continue
            ;;
        -h|--help)
            print_help
            ;;
        -*)
            print_usage_err "Unknown option: $arg"
            ;;
        *)
            G_ORIG_CMD=$arg
            handle_cmd $arg
            break
            ;;
    esac
done