| #include "pldm_fw_update_cmd.hpp" |
| |
| #include "common/utils.hpp" |
| #include "pldm_cmd_helper.hpp" |
| |
| #include <libpldm/firmware_update.h> |
| |
| namespace pldmtool |
| { |
| |
| namespace fw_update |
| { |
| |
| namespace |
| { |
| |
| using namespace pldmtool::helper; |
| using namespace pldm::fw_update; |
| |
| std::vector<std::unique_ptr<CommandInterface>> commands; |
| |
| } // namespace |
| |
| const std::map<uint8_t, std::string> fdStateMachine{ |
| {PLDM_FD_STATE_IDLE, "IDLE"}, |
| {PLDM_FD_STATE_LEARN_COMPONENTS, "LEARN COMPONENTS"}, |
| {PLDM_FD_STATE_READY_XFER, "READY XFER"}, |
| {PLDM_FD_STATE_DOWNLOAD, "DOWNLOAD"}, |
| {PLDM_FD_STATE_VERIFY, "VERIFY"}, |
| {PLDM_FD_STATE_APPLY, "APPLY"}, |
| {PLDM_FD_STATE_ACTIVATE, "ACTIVATE"}}; |
| |
| const std::map<uint8_t, const char*> fdAuxState{ |
| {PLDM_FD_OPERATION_IN_PROGRESS, "Operation in progress"}, |
| {PLDM_FD_OPERATION_SUCCESSFUL, "Operation successful"}, |
| {PLDM_FD_OPERATION_FAILED, "Operation Failed"}, |
| {PLDM_FD_IDLE_LEARN_COMPONENTS_READ_XFER, |
| "Not applicable in current state"}}; |
| |
| const std::map<uint8_t, const char*> fdAuxStateStatus{ |
| {PLDM_FD_AUX_STATE_IN_PROGRESS_OR_SUCCESS, |
| "AuxState is In Progress or Success"}, |
| {PLDM_FD_TIMEOUT, "Timeout occurred while performing action"}, |
| {PLDM_FD_GENERIC_ERROR, "Generic Error has occured"}}; |
| |
| const std::map<uint8_t, const char*> fdReasonCode{ |
| {PLDM_FD_INITIALIZATION, "Initialization of firmware device has occurred"}, |
| {PLDM_FD_ACTIVATE_FW, "ActivateFirmware command was received"}, |
| {PLDM_FD_CANCEL_UPDATE, "CancelUpdate command was received"}, |
| {PLDM_FD_TIMEOUT_LEARN_COMPONENT, |
| "Timeout occurred when in LEARN COMPONENT state"}, |
| {PLDM_FD_TIMEOUT_READY_XFER, "Timeout occurred when in READY XFER state"}, |
| {PLDM_FD_TIMEOUT_DOWNLOAD, "Timeout occurred when in DOWNLOAD state"}, |
| {PLDM_FD_TIMEOUT_VERIFY, "Timeout occurred when in VERIFY state"}, |
| {PLDM_FD_TIMEOUT_APPLY, "Timeout occurred when in APPLY state"}}; |
| |
| /** |
| * @brief descriptor type to name mapping |
| * |
| */ |
| const std::map<DescriptorType, const char*> descriptorName{ |
| {PLDM_FWUP_PCI_VENDOR_ID, "PCI Vendor ID"}, |
| {PLDM_FWUP_IANA_ENTERPRISE_ID, "IANA Enterprise ID"}, |
| {PLDM_FWUP_UUID, "UUID"}, |
| {PLDM_FWUP_PNP_VENDOR_ID, "PnP Vendor ID"}, |
| {PLDM_FWUP_ACPI_VENDOR_ID, "ACPI Vendor ID"}, |
| {PLDM_FWUP_PCI_DEVICE_ID, "PCI Device ID"}, |
| {PLDM_FWUP_PCI_SUBSYSTEM_VENDOR_ID, "PCI Subsystem Vendor ID"}, |
| {PLDM_FWUP_PCI_SUBSYSTEM_ID, "PCI Subsystem ID"}, |
| {PLDM_FWUP_PCI_REVISION_ID, "PCI Revision ID"}, |
| {PLDM_FWUP_PNP_PRODUCT_IDENTIFIER, "PnP Product Identifier"}, |
| {PLDM_FWUP_ACPI_PRODUCT_IDENTIFIER, "ACPI Product Identifier"}, |
| {PLDM_FWUP_VENDOR_DEFINED, "Vendor Defined"}}; |
| |
| class GetStatus : public CommandInterface |
| { |
| public: |
| ~GetStatus() = default; |
| GetStatus() = delete; |
| GetStatus(const GetStatus&) = delete; |
| GetStatus(GetStatus&&) = default; |
| GetStatus& operator=(const GetStatus&) = delete; |
| GetStatus& operator=(GetStatus&&) = default; |
| |
| using CommandInterface::CommandInterface; |
| |
| std::pair<int, std::vector<uint8_t>> createRequestMsg() override |
| { |
| std::vector<uint8_t> requestMsg(sizeof(pldm_msg_hdr) + |
| PLDM_GET_STATUS_REQ_BYTES); |
| auto request = reinterpret_cast<pldm_msg*>(requestMsg.data()); |
| auto rc = encode_get_status_req(instanceId, request, |
| PLDM_GET_STATUS_REQ_BYTES); |
| return {rc, requestMsg}; |
| } |
| |
| void parseResponseMsg(pldm_msg* responsePtr, size_t payloadLength) override |
| { |
| uint8_t completionCode = 0; |
| uint8_t currentState = 0; |
| uint8_t previousState = 0; |
| uint8_t auxState = 0; |
| uint8_t auxStateStatus = 0; |
| uint8_t progressPercent = 0; |
| uint8_t reasonCode = 0; |
| bitfield32_t updateOptionFlagsEnabled{0}; |
| |
| auto rc = decode_get_status_resp( |
| responsePtr, payloadLength, &completionCode, ¤tState, |
| &previousState, &auxState, &auxStateStatus, &progressPercent, |
| &reasonCode, &updateOptionFlagsEnabled); |
| if (rc != PLDM_SUCCESS || completionCode != PLDM_SUCCESS) |
| { |
| std::cerr << "Response Message Error: " |
| << "rc=" << rc << ",cc=" << (int)completionCode << "\n"; |
| return; |
| } |
| |
| ordered_json data; |
| data["CurrentState"] = fdStateMachine.at(currentState); |
| data["PreviousState"] = fdStateMachine.at(previousState); |
| data["AuxState"] = fdAuxState.at(auxState); |
| if (auxStateStatus >= PLDM_FD_VENDOR_DEFINED_STATUS_CODE_START && |
| auxStateStatus <= PLDM_FD_VENDOR_DEFINED_STATUS_CODE_END) |
| { |
| data["AuxStateStatus"] = auxStateStatus; |
| } |
| else |
| { |
| data["AuxStateStatus"] = fdAuxStateStatus.at(auxStateStatus); |
| } |
| data["ProgressPercent"] = progressPercent; |
| if (reasonCode >= PLDM_FD_STATUS_VENDOR_DEFINED_MIN && |
| reasonCode <= PLDM_FD_STATUS_VENDOR_DEFINED_MAX) |
| { |
| data["ReasonCode"] = reasonCode; |
| } |
| else |
| { |
| data["ReasonCode"] = fdReasonCode.at(reasonCode); |
| } |
| data["UpdateOptionFlagsEnabled"] = updateOptionFlagsEnabled.value; |
| |
| pldmtool::helper::DisplayInJson(data); |
| } |
| }; |
| |
| const std::map<uint16_t, std::string> componentClassification{ |
| {PLDM_COMP_UNKNOWN, "Unknown"}, |
| {PLDM_COMP_OTHER, "Other"}, |
| {PLDM_COMP_DRIVER, "Driver"}, |
| {PLDM_COMP_CONFIGURATION_SOFTWARE, "Configuration Software"}, |
| {PLDM_COMP_APPLICATION_SOFTWARE, "Application Software"}, |
| {PLDM_COMP_INSTRUMENTATION, "Instrumentation"}, |
| {PLDM_COMP_FIRMWARE_OR_BIOS, "Firmware/BIOS"}, |
| {PLDM_COMP_DIAGNOSTIC_SOFTWARE, "Diagnostic Software"}, |
| {PLDM_COMP_OPERATING_SYSTEM, "Operating System"}, |
| {PLDM_COMP_MIDDLEWARE, "Middleware"}, |
| {PLDM_COMP_FIRMWARE, "Firmware"}, |
| {PLDM_COMP_BIOS_OR_FCODE, "BIOS/FCode"}, |
| {PLDM_COMP_SUPPORT_OR_SERVICEPACK, "Support/Service Pack"}, |
| {PLDM_COMP_SOFTWARE_BUNDLE, "Software Bundle"}, |
| {PLDM_COMP_DOWNSTREAM_DEVICE, "Downstream Device"}}; |
| |
| class GetFwParams : public CommandInterface |
| { |
| public: |
| ~GetFwParams() = default; |
| GetFwParams() = delete; |
| GetFwParams(const GetFwParams&) = delete; |
| GetFwParams(GetFwParams&&) = default; |
| GetFwParams& operator=(const GetFwParams&) = delete; |
| GetFwParams& operator=(GetFwParams&&) = default; |
| |
| using CommandInterface::CommandInterface; |
| |
| std::pair<int, std::vector<uint8_t>> createRequestMsg() override |
| { |
| std::vector<uint8_t> requestMsg(sizeof(pldm_msg_hdr) + |
| PLDM_GET_FIRMWARE_PARAMETERS_REQ_BYTES); |
| auto request = reinterpret_cast<pldm_msg*>(requestMsg.data()); |
| auto rc = encode_get_firmware_parameters_req( |
| instanceId, PLDM_GET_FIRMWARE_PARAMETERS_REQ_BYTES, request); |
| return {rc, requestMsg}; |
| } |
| |
| void parseResponseMsg(pldm_msg* responsePtr, size_t payloadLength) override |
| { |
| pldm_get_firmware_parameters_resp fwParams{}; |
| variable_field activeCompImageSetVersion{}; |
| variable_field pendingCompImageSetVersion{}; |
| variable_field compParameterTable{}; |
| |
| auto rc = decode_get_firmware_parameters_resp( |
| responsePtr, payloadLength, &fwParams, &activeCompImageSetVersion, |
| &pendingCompImageSetVersion, &compParameterTable); |
| if (rc != PLDM_SUCCESS || fwParams.completion_code != PLDM_SUCCESS) |
| { |
| std::cerr << "Response Message Error: " |
| << "rc=" << rc << ",cc=" << (int)fwParams.completion_code |
| << "\n"; |
| return; |
| } |
| |
| ordered_json capabilitiesDuringUpdate; |
| if (fwParams.capabilities_during_update.bits.bit0) |
| { |
| capabilitiesDuringUpdate |
| ["Component Update Failure Recovery Capability"] = |
| "Device will not revert to previous component image upon failure, timeout or cancellation of the transfer."; |
| } |
| else |
| { |
| capabilitiesDuringUpdate |
| ["Component Update Failure Recovery Capability"] = |
| "Device will revert to previous component image upon failure, timeout or cancellation of the transfer."; |
| } |
| |
| if (fwParams.capabilities_during_update.bits.bit1) |
| { |
| capabilitiesDuringUpdate["Component Update Failure Retry Capability"] = |
| "Device will not be able to update component again unless it exits update mode and the UA sends a new Request Update command."; |
| } |
| else |
| { |
| capabilitiesDuringUpdate["Component Update Failure Retry Capability"] = |
| " Device can have component updated again without exiting update mode and restarting transfer via RequestUpdate command."; |
| } |
| |
| if (fwParams.capabilities_during_update.bits.bit2) |
| { |
| capabilitiesDuringUpdate["Firmware Device Partial Updates"] = |
| "Firmware Device can support a partial update, whereby a package which contains a component image set that is a subset of all components currently residing on the FD, can be transferred."; |
| } |
| else |
| { |
| capabilitiesDuringUpdate["Firmware Device Partial Updates"] = |
| "Firmware Device cannot accept a partial update and all components present on the FD shall be updated."; |
| } |
| |
| if (fwParams.capabilities_during_update.bits.bit3) |
| { |
| capabilitiesDuringUpdate |
| ["Firmware Device Host Functionality during Firmware Update"] = |
| "Device will not revert to previous component image upon failure, timeout or cancellation of the transfer"; |
| } |
| else |
| { |
| capabilitiesDuringUpdate |
| ["Firmware Device Host Functionality during Firmware Update"] = |
| "Device will revert to previous component image upon failure, timeout or cancellation of the transfer"; |
| } |
| |
| if (fwParams.capabilities_during_update.bits.bit4) |
| { |
| capabilitiesDuringUpdate["Firmware Device Update Mode Restrictions"] = |
| "Firmware device unable to enter update mode if host OS environment is active."; |
| } |
| else |
| { |
| capabilitiesDuringUpdate |
| ["Firmware Device Update Mode Restrictions"] = |
| "No host OS environment restriction for update mode"; |
| } |
| |
| ordered_json data; |
| data["CapabilitiesDuringUpdate"] = capabilitiesDuringUpdate; |
| data["ComponentCount"] = static_cast<uint16_t>(fwParams.comp_count); |
| data["ActiveComponentImageSetVersionString"] = |
| pldm::utils::toString(activeCompImageSetVersion); |
| data["PendingComponentImageSetVersionString"] = |
| pldm::utils::toString(pendingCompImageSetVersion); |
| |
| auto compParamPtr = compParameterTable.ptr; |
| auto compParamTableLen = compParameterTable.length; |
| pldm_component_parameter_entry compEntry{}; |
| variable_field activeCompVerStr{}; |
| variable_field pendingCompVerStr{}; |
| ordered_json compDataEntries; |
| |
| while (fwParams.comp_count-- && (compParamTableLen > 0)) |
| { |
| ordered_json compData; |
| auto rc = decode_get_firmware_parameters_resp_comp_entry( |
| compParamPtr, compParamTableLen, &compEntry, &activeCompVerStr, |
| &pendingCompVerStr); |
| if (rc) |
| { |
| std::cerr |
| << "Decoding component parameter table entry failed, RC=" |
| << rc << "\n"; |
| return; |
| } |
| |
| if (componentClassification.contains(compEntry.comp_classification)) |
| { |
| compData["ComponentClassification"] = |
| componentClassification.at(compEntry.comp_classification); |
| } |
| else |
| { |
| compData["ComponentClassification"] = |
| static_cast<uint16_t>(compEntry.comp_classification); |
| } |
| compData["ComponentIdentifier"] = |
| static_cast<uint16_t>(compEntry.comp_identifier); |
| compData["ComponentClassificationIndex"] = |
| static_cast<uint8_t>(compEntry.comp_classification_index); |
| compData["ActiveComponentComparisonStamp"] = |
| static_cast<uint32_t>(compEntry.active_comp_comparison_stamp); |
| |
| // ActiveComponentReleaseData |
| std::array<uint8_t, 8> noReleaseData{0x00, 0x00, 0x00, 0x00, |
| 0x00, 0x00, 0x00, 0x00}; |
| if (std::equal(noReleaseData.begin(), noReleaseData.end(), |
| compEntry.active_comp_release_date)) |
| { |
| compData["ActiveComponentReleaseDate"] = ""; |
| } |
| else |
| { |
| std::string activeComponentReleaseDate( |
| reinterpret_cast<const char*>( |
| compEntry.active_comp_release_date), |
| sizeof(compEntry.active_comp_release_date)); |
| compData["ActiveComponentReleaseDate"] = |
| activeComponentReleaseDate; |
| } |
| |
| compData["PendingComponentComparisonStamp"] = |
| static_cast<uint32_t>(compEntry.pending_comp_comparison_stamp); |
| |
| // PendingComponentReleaseData |
| if (std::equal(noReleaseData.begin(), noReleaseData.end(), |
| compEntry.pending_comp_release_date)) |
| { |
| compData["PendingComponentReleaseDate"] = ""; |
| } |
| else |
| { |
| std::string pendingComponentReleaseDate( |
| reinterpret_cast<const char*>( |
| compEntry.pending_comp_release_date), |
| sizeof(compEntry.pending_comp_release_date)); |
| compData["PendingComponentReleaseDate"] = |
| pendingComponentReleaseDate; |
| } |
| |
| // ComponentActivationMethods |
| ordered_json componentActivationMethods; |
| if (compEntry.comp_activation_methods.bits.bit0) |
| { |
| componentActivationMethods.push_back("Automatic"); |
| } |
| else if (compEntry.comp_activation_methods.bits.bit1) |
| { |
| componentActivationMethods.push_back("Self-Contained"); |
| } |
| else if (compEntry.comp_activation_methods.bits.bit2) |
| { |
| componentActivationMethods.push_back("Medium-specific reset"); |
| } |
| else if (compEntry.comp_activation_methods.bits.bit3) |
| { |
| componentActivationMethods.push_back("System reboot"); |
| } |
| else if (compEntry.comp_activation_methods.bits.bit4) |
| { |
| componentActivationMethods.push_back("DC power cycel"); |
| } |
| else if (compEntry.comp_activation_methods.bits.bit5) |
| { |
| componentActivationMethods.push_back("AC power cycle"); |
| } |
| compData["ComponentActivationMethods"] = componentActivationMethods; |
| |
| // CapabilitiesDuringUpdate |
| ordered_json compCapabilitiesDuringUpdate; |
| if (compEntry.capabilities_during_update.bits.bit0) |
| { |
| compCapabilitiesDuringUpdate |
| ["Firmware Device apply state functionality"] = |
| "Firmware Device performs an auto-apply during transfer phase and apply step will be completed immediately."; |
| } |
| else |
| { |
| compCapabilitiesDuringUpdate |
| ["Firmware Device apply state functionality"] = |
| " Firmware Device will execute an operation during the APPLY state which will include migrating the new component image to its final non-volatile storage destination."; |
| } |
| compData["CapabilitiesDuringUpdate"] = compCapabilitiesDuringUpdate; |
| |
| compData["ActiveComponentVersionString"] = |
| pldm::utils::toString(activeCompVerStr); |
| compData["PendingComponentVersionString"] = |
| pldm::utils::toString(pendingCompVerStr); |
| |
| compParamPtr += sizeof(pldm_component_parameter_entry) + |
| activeCompVerStr.length + pendingCompVerStr.length; |
| compParamTableLen -= sizeof(pldm_component_parameter_entry) + |
| activeCompVerStr.length + |
| pendingCompVerStr.length; |
| compDataEntries.push_back(compData); |
| } |
| data["ComponentParameterEntries"] = compDataEntries; |
| |
| pldmtool::helper::DisplayInJson(data); |
| } |
| }; |
| |
| class QueryDeviceIdentifiers : public CommandInterface |
| { |
| public: |
| ~QueryDeviceIdentifiers() = default; |
| QueryDeviceIdentifiers() = delete; |
| QueryDeviceIdentifiers(const QueryDeviceIdentifiers&) = delete; |
| QueryDeviceIdentifiers(QueryDeviceIdentifiers&&) = default; |
| QueryDeviceIdentifiers& operator=(const QueryDeviceIdentifiers&) = delete; |
| QueryDeviceIdentifiers& operator=(QueryDeviceIdentifiers&&) = default; |
| |
| /** |
| * @brief Implementation of createRequestMsg for QueryDeviceIdentifiers |
| * |
| * @return std::pair<int, std::vector<uint8_t>> |
| */ |
| std::pair<int, std::vector<uint8_t>> createRequestMsg() override; |
| |
| /** |
| * @brief Implementation of parseResponseMsg for QueryDeviceIdentifiers |
| * |
| * @param[in] responsePtr |
| * @param[in] payloadLength |
| */ |
| void parseResponseMsg(pldm_msg* responsePtr, size_t payloadLength) override; |
| using CommandInterface::CommandInterface; |
| |
| private: |
| /** |
| * @brief Method to update QueryDeviceIdentifiers json response in a user |
| * friendly format |
| * |
| * @param[in] descriptors - descriptor json response |
| * @param[in] descriptorType - descriptor type |
| * @param[in] descriptorVal - descriptor value |
| */ |
| void updateDescriptor( |
| ordered_json& descriptors, const DescriptorType& descriptorType, |
| const std::variant<DescriptorData, VendorDefinedDescriptorInfo>& |
| descriptorVal); |
| }; |
| |
| void QueryDeviceIdentifiers::updateDescriptor( |
| ordered_json& descriptors, const DescriptorType& descriptorType, |
| const std::variant<DescriptorData, VendorDefinedDescriptorInfo>& |
| descriptorVal) |
| { |
| std::ostringstream descDataStream; |
| DescriptorData descData; |
| if (descriptorType != PLDM_FWUP_VENDOR_DEFINED) |
| { |
| descData = std::get<DescriptorData>(descriptorVal); |
| } |
| else |
| { |
| descData = std::get<VendorDefinedDescriptorData>( |
| std::get<VendorDefinedDescriptorInfo>(descriptorVal)); |
| } |
| for (int byte : descData) |
| { |
| descDataStream << std::setfill('0') << std::setw(2) << std::hex << byte; |
| } |
| |
| if (descriptorName.contains(descriptorType)) |
| { |
| // Update the existing json response if entry is already present |
| for (auto& descriptor : descriptors) |
| { |
| if (descriptor["Type"] == descriptorName.at(descriptorType)) |
| { |
| if (descriptorType != PLDM_FWUP_VENDOR_DEFINED) |
| { |
| descriptor["Value"].emplace_back(descDataStream.str()); |
| } |
| else |
| { |
| ordered_json vendorDefinedVal; |
| vendorDefinedVal[std::get<VendorDefinedDescriptorTitle>( |
| std::get<VendorDefinedDescriptorInfo>(descriptorVal))] = |
| descDataStream.str(); |
| descriptor["Value"].emplace_back(vendorDefinedVal); |
| } |
| return; |
| } |
| } |
| // Entry is not present, add type and value to json response |
| ordered_json descriptor = |
| ordered_json::object({{"Type", descriptorName.at(descriptorType)}, |
| {"Value", ordered_json::array()}}); |
| if (descriptorType != PLDM_FWUP_VENDOR_DEFINED) |
| { |
| descriptor["Value"].emplace_back(descDataStream.str()); |
| } |
| else |
| { |
| ordered_json vendorDefinedVal; |
| vendorDefinedVal[std::get<VendorDefinedDescriptorTitle>( |
| std::get<VendorDefinedDescriptorInfo>(descriptorVal))] = |
| descDataStream.str(); |
| descriptor["Value"].emplace_back(vendorDefinedVal); |
| } |
| descriptors.emplace_back(descriptor); |
| } |
| else |
| { |
| std::cerr << "Unknown descriptor type, type=" << descriptorType << "\n"; |
| } |
| } |
| std::pair<int, std::vector<uint8_t>> QueryDeviceIdentifiers::createRequestMsg() |
| { |
| std::vector<uint8_t> requestMsg(sizeof(pldm_msg_hdr) + |
| PLDM_QUERY_DEVICE_IDENTIFIERS_REQ_BYTES); |
| auto request = reinterpret_cast<pldm_msg*>(requestMsg.data()); |
| auto rc = encode_query_device_identifiers_req( |
| instanceId, PLDM_QUERY_DEVICE_IDENTIFIERS_REQ_BYTES, request); |
| return {rc, requestMsg}; |
| } |
| |
| void QueryDeviceIdentifiers::parseResponseMsg(pldm_msg* responsePtr, |
| size_t payloadLength) |
| { |
| uint8_t completionCode = PLDM_SUCCESS; |
| uint32_t deviceIdentifiersLen = 0; |
| uint8_t descriptorCount = 0; |
| uint8_t* descriptorPtr = nullptr; |
| uint8_t eid = getMCTPEID(); |
| auto rc = decode_query_device_identifiers_resp( |
| responsePtr, payloadLength, &completionCode, &deviceIdentifiersLen, |
| &descriptorCount, &descriptorPtr); |
| if (rc) |
| { |
| std::cerr << "Decoding QueryDeviceIdentifiers response failed,EID=" |
| << unsigned(eid) << ", RC=" << rc << "\n"; |
| return; |
| } |
| if (completionCode) |
| { |
| std::cerr << "QueryDeviceIdentifiers response failed with error " |
| "completion code, EID=" |
| << unsigned(eid) << ", CC=" << unsigned(completionCode) |
| << "\n"; |
| return; |
| } |
| ordered_json data; |
| data["EID"] = eid; |
| ordered_json descriptors; |
| while (descriptorCount-- && (deviceIdentifiersLen > 0)) |
| { |
| DescriptorType descriptorType = 0; |
| variable_field descriptorData{}; |
| |
| rc = decode_descriptor_type_length_value( |
| descriptorPtr, deviceIdentifiersLen, &descriptorType, |
| &descriptorData); |
| if (rc) |
| { |
| std::cerr << "Decoding descriptor type, length and value failed," |
| << "EID=" << unsigned(eid) << ",RC=" << rc << "\n "; |
| return; |
| } |
| |
| if (descriptorType != PLDM_FWUP_VENDOR_DEFINED) |
| { |
| std::vector<uint8_t> descData( |
| descriptorData.ptr, descriptorData.ptr + descriptorData.length); |
| updateDescriptor(descriptors, descriptorType, descData); |
| } |
| else |
| { |
| uint8_t descriptorTitleStrType = 0; |
| variable_field descriptorTitleStr{}; |
| variable_field vendorDefinedDescriptorData{}; |
| |
| rc = decode_vendor_defined_descriptor_value( |
| descriptorData.ptr, descriptorData.length, |
| &descriptorTitleStrType, &descriptorTitleStr, |
| &vendorDefinedDescriptorData); |
| if (rc) |
| { |
| std::cerr << "Decoding Vendor-defined descriptor value" |
| << "failed EID=" << unsigned(eid) << ", RC=" << rc |
| << "\n "; |
| return; |
| } |
| |
| auto vendorDescTitle = pldm::utils::toString(descriptorTitleStr); |
| std::vector<uint8_t> vendorDescData( |
| vendorDefinedDescriptorData.ptr, |
| vendorDefinedDescriptorData.ptr + |
| vendorDefinedDescriptorData.length); |
| updateDescriptor(descriptors, descriptorType, |
| std::make_tuple(vendorDescTitle, vendorDescData)); |
| } |
| auto nextDescriptorOffset = |
| sizeof(pldm_descriptor_tlv().descriptor_type) + |
| sizeof(pldm_descriptor_tlv().descriptor_length) + |
| descriptorData.length; |
| descriptorPtr += nextDescriptorOffset; |
| deviceIdentifiersLen -= nextDescriptorOffset; |
| } |
| data["Descriptors"] = descriptors; |
| pldmtool::helper::DisplayInJson(data); |
| } |
| |
| void registerCommand(CLI::App& app) |
| { |
| auto fwUpdate = |
| app.add_subcommand("fw_update", "firmware update type commands"); |
| fwUpdate->require_subcommand(1); |
| |
| auto getStatus = fwUpdate->add_subcommand("GetStatus", "Status of the FD"); |
| commands.push_back( |
| std::make_unique<GetStatus>("fw_update", "GetStatus", getStatus)); |
| |
| auto getFwParams = fwUpdate->add_subcommand( |
| "GetFwParams", "To get the component details of the FD"); |
| commands.push_back( |
| std::make_unique<GetFwParams>("fw_update", "GetFwParams", getFwParams)); |
| |
| auto queryDeviceIdentifiers = fwUpdate->add_subcommand( |
| "QueryDeviceIdentifiers", "To query device identifiers of the FD"); |
| commands.push_back(std::make_unique<QueryDeviceIdentifiers>( |
| "fw_update", "QueryDeviceIdentifiers", queryDeviceIdentifiers)); |
| } |
| |
| } // namespace fw_update |
| |
| } // namespace pldmtool |