| #include "softoff.hpp" |
| |
| #include "common/instance_id.hpp" |
| #include "common/transport.hpp" |
| #include "common/utils.hpp" |
| |
| #include <libpldm/entity.h> |
| #include <libpldm/platform.h> |
| #include <libpldm/state_set.h> |
| |
| #include <phosphor-logging/lg2.hpp> |
| #include <sdbusplus/bus.hpp> |
| #include <sdeventplus/clock.hpp> |
| #include <sdeventplus/exception.hpp> |
| #include <sdeventplus/source/io.hpp> |
| #include <sdeventplus/source/time.hpp> |
| |
| #include <array> |
| #include <filesystem> |
| #include <fstream> |
| |
| PHOSPHOR_LOG2_USING; |
| |
| namespace pldm |
| { |
| using namespace sdeventplus; |
| using namespace sdeventplus::source; |
| namespace fs = std::filesystem; |
| constexpr auto clockId = sdeventplus::ClockId::RealTime; |
| using Clock = Clock<clockId>; |
| using Timer = Time<clockId>; |
| |
| pldm::pdr::TerminusID TID = 0; // TID will be implemented later. |
| namespace sdbusRule = sdbusplus::bus::match::rules; |
| |
| SoftPowerOff::SoftPowerOff(sdbusplus::bus_t& bus, sd_event* event, |
| pldm::InstanceIdDb& instanceIdDb) : |
| bus(bus), |
| timer(event), instanceIdDb(instanceIdDb) |
| { |
| auto jsonData = parseConfig(); |
| |
| if (jsonData.is_discarded()) |
| { |
| error("Parsing softoff config JSON file failed"); |
| return; |
| } |
| |
| getHostState(); |
| if (hasError || completed) |
| { |
| return; |
| } |
| const std::vector<Json> emptyJsonList{}; |
| auto entries = jsonData.value("entries", emptyJsonList); |
| for (const auto& entry : entries) |
| { |
| TID = entry.value("tid", 0); |
| pldm::pdr::EntityType entityType = entry.value("entityType", 0); |
| pldm::pdr::StateSetId stateSetId = entry.value("stateSetId", 0); |
| |
| bool effecterFound = getEffecterID(entityType, stateSetId); |
| if (effecterFound) |
| { |
| auto rc = getSensorInfo(entityType, stateSetId); |
| if (rc != PLDM_SUCCESS) |
| { |
| error("Message get Sensor PDRs error. PLDM error code = {RC}", |
| "RC", lg2::hex, static_cast<int>(rc)); |
| hasError = true; |
| return; |
| } |
| break; |
| } |
| else |
| { |
| continue; |
| } |
| } |
| |
| // Matches on the pldm StateSensorEvent signal |
| pldmEventSignal = std::make_unique<sdbusplus::bus::match_t>( |
| bus, |
| sdbusRule::type::signal() + sdbusRule::member("StateSensorEvent") + |
| sdbusRule::path("/xyz/openbmc_project/pldm") + |
| sdbusRule::interface("xyz.openbmc_project.PLDM.Event"), |
| std::bind(std::mem_fn(&SoftPowerOff::hostSoftOffComplete), this, |
| std::placeholders::_1)); |
| } |
| |
| int SoftPowerOff::getHostState() |
| { |
| try |
| { |
| pldm::utils::PropertyValue propertyValue = |
| pldm::utils::DBusHandler().getDbusPropertyVariant( |
| "/xyz/openbmc_project/state/host0", "CurrentHostState", |
| "xyz.openbmc_project.State.Host"); |
| |
| if ((std::get<std::string>(propertyValue) != |
| "xyz.openbmc_project.State.Host.HostState.Running") && |
| (std::get<std::string>(propertyValue) != |
| "xyz.openbmc_project.State.Host.HostState.TransitioningToOff")) |
| { |
| // Host state is not "Running", this app should return success |
| completed = true; |
| return PLDM_SUCCESS; |
| } |
| } |
| catch (const std::exception& e) |
| { |
| error("PLDM host soft off: Can't get current host state: {ERROR}", |
| "ERROR", e); |
| hasError = true; |
| return PLDM_ERROR; |
| } |
| |
| return PLDM_SUCCESS; |
| } |
| |
| void SoftPowerOff::hostSoftOffComplete(sdbusplus::message_t& msg) |
| { |
| pldm::pdr::TerminusID msgTID; |
| pldm::pdr::SensorID msgSensorID; |
| pldm::pdr::SensorOffset msgSensorOffset; |
| pldm::pdr::EventState msgEventState; |
| pldm::pdr::EventState msgPreviousEventState; |
| |
| // Read the msg and populate each variable |
| msg.read(msgTID, msgSensorID, msgSensorOffset, msgEventState, |
| msgPreviousEventState); |
| |
| if (msgSensorID == sensorID && msgSensorOffset == sensorOffset && |
| msgEventState == PLDM_SW_TERM_GRACEFUL_SHUTDOWN) |
| { |
| // Receive Graceful shutdown completion event message. Disable the timer |
| auto rc = timer.stop(); |
| if (rc < 0) |
| { |
| error("PLDM soft off: Failure to STOP the timer. ERRNO={RC}", "RC", |
| rc); |
| } |
| |
| // This marks the completion of pldm soft power off. |
| completed = true; |
| } |
| } |
| |
| Json SoftPowerOff::parseConfig() |
| { |
| fs::path softoffConfigJson(fs::path(SOFTOFF_CONFIG_JSON) / |
| "softoff_config.json"); |
| |
| if (!fs::exists(softoffConfigJson) || fs::is_empty(softoffConfigJson)) |
| { |
| error("Parsing softoff config JSON file failed, File does not exist"); |
| return PLDM_ERROR; |
| } |
| |
| std::ifstream jsonFile(softoffConfigJson); |
| return Json::parse(jsonFile); |
| } |
| |
| bool SoftPowerOff::getEffecterID(pldm::pdr::EntityType& entityType, |
| pldm::pdr::StateSetId& stateSetId) |
| { |
| auto& bus = pldm::utils::DBusHandler::getBus(); |
| try |
| { |
| std::vector<std::vector<uint8_t>> response{}; |
| auto method = bus.new_method_call( |
| "xyz.openbmc_project.PLDM", "/xyz/openbmc_project/pldm", |
| "xyz.openbmc_project.PLDM.PDR", "FindStateEffecterPDR"); |
| method.append(TID, entityType, stateSetId); |
| auto responseMsg = bus.call(method, dbusTimeout); |
| |
| responseMsg.read(response); |
| if (response.size()) |
| { |
| for (auto& rep : response) |
| { |
| auto softoffPdr = |
| reinterpret_cast<pldm_state_effecter_pdr*>(rep.data()); |
| effecterID = softoffPdr->effecter_id; |
| } |
| } |
| else |
| { |
| return false; |
| } |
| } |
| catch (const sdbusplus::exception_t& e) |
| { |
| error("PLDM soft off: Error get softPowerOff PDR,ERROR={ERR_EXCEP}", |
| "ERR_EXCEP", e.what()); |
| return false; |
| } |
| return true; |
| } |
| |
| int SoftPowerOff::getSensorInfo(pldm::pdr::EntityType& entityType, |
| pldm::pdr::StateSetId& stateSetId) |
| { |
| try |
| { |
| auto& bus = pldm::utils::DBusHandler::getBus(); |
| std::vector<std::vector<uint8_t>> Response{}; |
| auto method = bus.new_method_call( |
| "xyz.openbmc_project.PLDM", "/xyz/openbmc_project/pldm", |
| "xyz.openbmc_project.PLDM.PDR", "FindStateSensorPDR"); |
| method.append(TID, entityType, stateSetId); |
| |
| auto ResponseMsg = bus.call(method, dbusTimeout); |
| |
| ResponseMsg.read(Response); |
| |
| if (Response.size() == 0) |
| { |
| error("No sensor PDR has been found that matches the criteria"); |
| return PLDM_ERROR; |
| } |
| |
| pldm_state_sensor_pdr* pdr = nullptr; |
| for (auto& rep : Response) |
| { |
| pdr = reinterpret_cast<pldm_state_sensor_pdr*>(rep.data()); |
| if (!pdr) |
| { |
| error("Failed to get state sensor PDR."); |
| return PLDM_ERROR; |
| } |
| } |
| |
| sensorID = pdr->sensor_id; |
| |
| auto compositeSensorCount = pdr->composite_sensor_count; |
| auto possibleStatesStart = pdr->possible_states; |
| |
| for (auto offset = 0; offset < compositeSensorCount; offset++) |
| { |
| auto possibleStates = |
| reinterpret_cast<state_sensor_possible_states*>( |
| possibleStatesStart); |
| auto setId = possibleStates->state_set_id; |
| auto possibleStateSize = possibleStates->possible_states_size; |
| |
| if (setId == PLDM_STATE_SET_SW_TERMINATION_STATUS) |
| { |
| sensorOffset = offset; |
| break; |
| } |
| possibleStatesStart += possibleStateSize + sizeof(setId) + |
| sizeof(possibleStateSize); |
| } |
| } |
| catch (const sdbusplus::exception_t& e) |
| { |
| error("PLDM soft off: Error get State Sensor PDR,ERROR={ERR_EXCEP}", |
| "ERR_EXCEP", e.what()); |
| return PLDM_ERROR; |
| } |
| |
| return PLDM_SUCCESS; |
| } |
| |
| int SoftPowerOff::hostSoftOff(sdeventplus::Event& event) |
| { |
| constexpr uint8_t effecterCount = 1; |
| PldmTransport pldmTransport{}; |
| uint8_t instanceID; |
| uint8_t mctpEID; |
| |
| mctpEID = pldm::utils::readHostEID(); |
| // TODO: fix mapping to work around OpenBMC ecosystem deficiencies |
| pldm_tid_t pldmTID = static_cast<pldm_tid_t>(mctpEID); |
| |
| std::array<uint8_t, sizeof(pldm_msg_hdr) + sizeof(effecterID) + |
| sizeof(effecterCount) + |
| sizeof(set_effecter_state_field)> |
| requestMsg{}; |
| auto request = reinterpret_cast<pldm_msg*>(requestMsg.data()); |
| set_effecter_state_field stateField{ |
| PLDM_REQUEST_SET, PLDM_SW_TERM_GRACEFUL_SHUTDOWN_REQUESTED}; |
| instanceID = instanceIdDb.next(pldmTID); |
| auto rc = encode_set_state_effecter_states_req( |
| instanceID, effecterID, effecterCount, &stateField, request); |
| if (rc != PLDM_SUCCESS) |
| { |
| instanceIdDb.free(pldmTID, instanceID); |
| error("Message encode failure. PLDM error code = {RC}", "RC", lg2::hex, |
| static_cast<int>(rc)); |
| return PLDM_ERROR; |
| } |
| |
| // Add a timer to the event loop, default 30s. |
| auto timerCallback = [=, this](Timer& /*source*/, |
| Timer::TimePoint /*time*/) mutable { |
| if (!responseReceived) |
| { |
| instanceIdDb.free(pldmTID, instanceID); |
| error( |
| "PLDM soft off: ERROR! Can't get the response for the PLDM request msg. Time out! Exit the pldm-softpoweroff"); |
| exit(-1); |
| } |
| return; |
| }; |
| Timer time(event, (Clock(event).now() + std::chrono::seconds{30}), |
| std::chrono::seconds{1}, std::move(timerCallback)); |
| |
| // Add a callback to handle EPOLLIN on fd |
| auto callback = [=, &pldmTransport, this](IO& io, int fd, |
| uint32_t revents) mutable { |
| if (fd != pldmTransport.getEventSource()) |
| { |
| return; |
| } |
| |
| if (!(revents & EPOLLIN)) |
| { |
| return; |
| } |
| |
| void* responseMsg = nullptr; |
| size_t responseMsgSize{}; |
| pldm_tid_t srcTID = pldmTID; |
| |
| auto rc = pldmTransport.recvMsg(pldmTID, responseMsg, responseMsgSize); |
| if (rc) |
| { |
| error("Soft off: failed to recv pldm data. PLDM RC = {RC}", "RC", |
| static_cast<int>(rc)); |
| return; |
| } |
| |
| std::unique_ptr<void, decltype(std::free)*> responseMsgPtr{responseMsg, |
| std::free}; |
| |
| // We've got the response meant for the PLDM request msg that was |
| // sent out |
| io.set_enabled(Enabled::Off); |
| auto response = reinterpret_cast<pldm_msg*>(responseMsgPtr.get()); |
| |
| if (srcTID != pldmTID || |
| !pldm_msg_hdr_correlate_response(&request->hdr, &response->hdr)) |
| { |
| /* This isn't the response we were looking for */ |
| return; |
| } |
| |
| /* We have the right response, release the instance ID and process */ |
| io.set_enabled(Enabled::Off); |
| instanceIdDb.free(pldmTID, instanceID); |
| |
| if (response->payload[0] != PLDM_SUCCESS) |
| { |
| error("Getting the wrong response. PLDM RC = {RC}", "RC", |
| (unsigned)response->payload[0]); |
| exit(-1); |
| } |
| |
| responseReceived = true; |
| |
| // Start Timer |
| using namespace std::chrono; |
| auto timeMicroseconds = |
| duration_cast<microseconds>(seconds(SOFTOFF_TIMEOUT_SECONDS)); |
| |
| auto ret = startTimer(timeMicroseconds); |
| if (ret < 0) |
| { |
| error( |
| "Failure to start Host soft off wait timer, ERRNO = {RET}. Exit the pldm-softpoweroff", |
| "RET", ret); |
| exit(-1); |
| } |
| else |
| { |
| error( |
| "Timer started waiting for host soft off, TIMEOUT_IN_SEC = {TIMEOUT_SEC}", |
| "TIMEOUT_SEC", SOFTOFF_TIMEOUT_SECONDS); |
| } |
| return; |
| }; |
| IO io(event, pldmTransport.getEventSource(), EPOLLIN, std::move(callback)); |
| |
| // Asynchronously send the PLDM request |
| rc = pldmTransport.sendMsg(pldmTID, requestMsg.data(), requestMsg.size()); |
| if (0 > rc) |
| { |
| instanceIdDb.free(pldmTID, instanceID); |
| error( |
| "Failed to send message/receive response. RC = {RC}, errno = {ERR}", |
| "RC", static_cast<int>(rc), "ERR", errno); |
| return PLDM_ERROR; |
| } |
| |
| // Time out or soft off complete |
| while (!isCompleted() && !isTimerExpired()) |
| { |
| try |
| { |
| event.run(std::nullopt); |
| } |
| catch (const sdeventplus::SdEventError& e) |
| { |
| instanceIdDb.free(pldmTID, instanceID); |
| error( |
| "PLDM host soft off: Failure in processing request.ERROR= {ERR_EXCEP}", |
| "ERR_EXCEP", e.what()); |
| return PLDM_ERROR; |
| } |
| } |
| |
| return PLDM_SUCCESS; |
| } |
| |
| int SoftPowerOff::startTimer(const std::chrono::microseconds& usec) |
| { |
| return timer.start(usec); |
| } |
| } // namespace pldm |