| #ifndef PLATFORM_H |
| #define PLATFORM_H |
| |
| #ifdef __cplusplus |
| extern "C" { |
| #endif |
| |
| #include <stddef.h> |
| #include <stdint.h> |
| |
| #include "base.h" |
| #include "pdr.h" |
| |
| /* Maximum size for request */ |
| #define PLDM_SET_STATE_EFFECTER_STATES_REQ_BYTES 19 |
| #define PLDM_GET_STATE_SENSOR_READINGS_REQ_BYTES 4 |
| #define PLDM_GET_NUMERIC_EFFECTER_VALUE_REQ_BYTES 2 |
| #define PLDM_GET_SENSOR_READING_REQ_BYTES 4 |
| /* Response lengths are inclusive of completion code */ |
| #define PLDM_SET_STATE_EFFECTER_STATES_RESP_BYTES 1 |
| |
| #define PLDM_SET_NUMERIC_EFFECTER_VALUE_RESP_BYTES 1 |
| #define PLDM_SET_NUMERIC_EFFECTER_VALUE_MIN_REQ_BYTES 4 |
| |
| #define PLDM_GET_PDR_REQ_BYTES 13 |
| /* Minimum response length */ |
| #define PLDM_GET_PDR_MIN_RESP_BYTES 12 |
| #define PLDM_GET_NUMERIC_EFFECTER_VALUE_MIN_RESP_BYTES 5 |
| #define PLDM_GET_SENSOR_READING_MIN_RESP_BYTES 8 |
| #define PLDM_GET_STATE_SENSOR_READINGS_MIN_RESP_BYTES 2 |
| |
| /* Minimum length for PLDM PlatformEventMessage request */ |
| #define PLDM_PLATFORM_EVENT_MESSAGE_MIN_REQ_BYTES 3 |
| #define PLDM_PLATFORM_EVENT_MESSAGE_STATE_SENSOR_STATE_REQ_BYTES 6 |
| #define PLDM_PLATFORM_EVENT_MESSAGE_RESP_BYTES 2 |
| |
| /* Minumum length of senson event data */ |
| #define PLDM_SENSOR_EVENT_DATA_MIN_LENGTH 5 |
| #define PLDM_SENSOR_EVENT_SENSOR_OP_STATE_DATA_LENGTH 2 |
| #define PLDM_SENSOR_EVENT_STATE_SENSOR_STATE_DATA_LENGTH 3 |
| #define PLDM_SENSOR_EVENT_NUMERIC_SENSOR_STATE_MIN_DATA_LENGTH 4 |
| #define PLDM_SENSOR_EVENT_NUMERIC_SENSOR_STATE_MAX_DATA_LENGTH 7 |
| #define PLDM_SENSOR_EVENT_NUMERIC_SENSOR_STATE_8BIT_DATA_LENGTH 4 |
| #define PLDM_SENSOR_EVENT_NUMERIC_SENSOR_STATE_16BIT_DATA_LENGTH 5 |
| #define PLDM_SENSOR_EVENT_NUMERIC_SENSOR_STATE_32BIT_DATA_LENGTH 7 |
| |
| /* Minimum length of data for pldmPDRRepositoryChgEvent */ |
| #define PLDM_PDR_REPOSITORY_CHG_EVENT_MIN_LENGTH 2 |
| #define PLDM_PDR_REPOSITORY_CHANGE_RECORD_MIN_LENGTH 2 |
| |
| #define PLDM_INVALID_EFFECTER_ID 0xFFFF |
| |
| enum pldm_effecter_data_size { |
| PLDM_EFFECTER_DATA_SIZE_UINT8, |
| PLDM_EFFECTER_DATA_SIZE_SINT8, |
| PLDM_EFFECTER_DATA_SIZE_UINT16, |
| PLDM_EFFECTER_DATA_SIZE_SINT16, |
| PLDM_EFFECTER_DATA_SIZE_UINT32, |
| PLDM_EFFECTER_DATA_SIZE_SINT32 |
| }; |
| |
| enum pldm_range_field_format { |
| PLDM_RANGE_FIELD_FORMAT_UINT8, |
| PLDM_RANGE_FIELD_FORMAT_SINT8, |
| PLDM_RANGE_FIELD_FORMAT_UINT16, |
| PLDM_RANGE_FIELD_FORMAT_SINT16, |
| PLDM_RANGE_FIELD_FORMAT_UINT32, |
| PLDM_RANGE_FIELD_FORMAT_SINT32, |
| PLDM_RANGE_FIELD_FORMAT_REAL32 |
| }; |
| |
| enum set_request { PLDM_NO_CHANGE = 0x00, PLDM_REQUEST_SET = 0x01 }; |
| |
| enum effecter_state { PLDM_INVALID_VALUE = 0xFF }; |
| |
| enum pldm_sensor_present_state { |
| PLDM_SENSOR_UNKNOWN = 0x0, |
| PLDM_SENSOR_NORMAL = 0x01, |
| PLDM_SENSOR_WARNING = 0x02, |
| PLDM_SENSOR_CRITICAL = 0x03, |
| PLDM_SENSOR_FATAL = 0x04, |
| PLDM_SENSOR_LOWERWARNING = 0x05, |
| PLDM_SENSOR_LOWERCRITICAL = 0x06, |
| PLDM_SENSOR_LOWERFATAL = 0x07, |
| PLDM_SENSOR_UPPERWARNING = 0x08, |
| PLDM_SENSOR_UPPERCRITICAL = 0x09, |
| PLDM_SENSOR_UPPERFATAL = 0x0a |
| }; |
| |
| enum pldm_sensor_event_message_enable { |
| PLDM_NO_EVENT_GENERATION, |
| PLDM_EVENTS_DISABLED, |
| PLDM_EVENTS_ENABLED, |
| PLDM_OP_EVENTS_ONLY_ENABLED, |
| PLDM_STATE_EVENTS_ONLY_ENABLED |
| }; |
| |
| enum pldm_effecter_oper_state { |
| EFFECTER_OPER_STATE_ENABLED_UPDATEPENDING, |
| EFFECTER_OPER_STATE_ENABLED_NOUPDATEPENDING, |
| EFFECTER_OPER_STATE_DISABLED, |
| EFFECTER_OPER_STATE_UNAVAILABLE, |
| EFFECTER_OPER_STATE_STATUSUNKNOWN, |
| EFFECTER_OPER_STATE_FAILED, |
| EFFECTER_OPER_STATE_INITIALIZING, |
| EFFECTER_OPER_STATE_SHUTTINGDOWN, |
| EFFECTER_OPER_STATE_INTEST |
| }; |
| |
| enum pldm_platform_commands { |
| PLDM_GET_SENSOR_READING = 0x11, |
| PLDM_GET_STATE_SENSOR_READINGS = 0x21, |
| PLDM_SET_NUMERIC_EFFECTER_VALUE = 0x31, |
| PLDM_GET_NUMERIC_EFFECTER_VALUE = 0x32, |
| PLDM_SET_STATE_EFFECTER_STATES = 0x39, |
| PLDM_GET_PDR = 0x51, |
| PLDM_PLATFORM_EVENT_MESSAGE = 0x0A |
| }; |
| |
| /** @brief PLDM PDR types |
| */ |
| enum pldm_pdr_types { |
| PLDM_STATE_SENSOR_PDR = 4, |
| PLDM_NUMERIC_EFFECTER_PDR = 9, |
| PLDM_STATE_EFFECTER_PDR = 11, |
| PLDM_PDR_ENTITY_ASSOCIATION = 15, |
| PLDM_PDR_FRU_RECORD_SET = 20, |
| }; |
| |
| /** @brief PLDM effecter initialization schemes |
| */ |
| enum pldm_effecter_init { |
| PLDM_NO_INIT, |
| PLDM_USE_INIT_PDR, |
| PLDM_ENABLE_EFFECTER, |
| PLDM_DISABLE_EFECTER |
| }; |
| |
| /** @brief PLDM Platform M&C completion codes |
| */ |
| enum pldm_platform_completion_codes { |
| PLDM_PLATFORM_INVALID_EFFECTER_ID = 0x80, |
| PLDM_PLATFORM_INVALID_STATE_VALUE = 0x81, |
| |
| PLDM_PLATFORM_INVALID_DATA_TRANSFER_HANDLE = 0x80, |
| PLDM_PLATFORM_INVALID_TRANSFER_OPERATION_FLAG = 0x81, |
| PLDM_PLATFORM_INVALID_RECORD_HANDLE = 0x82, |
| PLDM_PLATFORM_INVALID_RECORD_CHANGE_NUMBER = 0x83, |
| PLDM_PLATFORM_TRANSFER_TIMEOUT = 0x84, |
| |
| PLDM_PLATFORM_SET_EFFECTER_UNSUPPORTED_SENSORSTATE = 0x82, |
| }; |
| |
| /** @brief PLDM Event types |
| */ |
| enum pldm_event_types { |
| PLDM_SENSOR_EVENT = 0x00, |
| PLDM_EFFECTER_EVENT = 0x01, |
| PLDM_REDFISH_TASK_EXECUTED_EVENT = 0x02, |
| PLDM_REDFISH_MESSAGE_EVENT = 0x03, |
| PLDM_PDR_REPOSITORY_CHG_EVENT = 0x04, |
| PLDM_MESSAGE_POLL_EVENT = 0x05, |
| PLDM_HEARTBEAT_TIMER_ELAPSED_EVENT = 0x06 |
| }; |
| |
| /** @brief PLDM sensorEventClass states |
| */ |
| enum sensor_event_class_states { |
| PLDM_SENSOR_OP_STATE, |
| PLDM_STATE_SENSOR_STATE, |
| PLDM_NUMERIC_SENSOR_STATE |
| }; |
| |
| /** @brief PLDM sensor supported states |
| */ |
| enum pldm_sensor_operational_state { |
| PLDM_SENSOR_ENABLED, |
| PLDM_SENSOR_DISABLED, |
| PLDM_SENSOR_UNAVAILABLE, |
| PLDM_SENSOR_STATUSUNKOWN, |
| PLDM_SENSOR_FAILED, |
| PLDM_SENSOR_INITIALIZING, |
| PLDM_SENSOR_SHUTTINGDOWN, |
| PLDM_SENSOR_INTEST |
| }; |
| |
| /** @brief PLDM pldmPDRRepositoryChgEvent class eventData format |
| */ |
| enum pldm_pdr_repository_chg_event_data_format { |
| REFRESH_ENTIRE_REPOSITORY, |
| FORMAT_IS_PDR_TYPES, |
| FORMAT_IS_PDR_HANDLES |
| }; |
| |
| /** @brief PLDM pldmPDRRepositoryChgEvent class changeRecord format |
| * eventDataOperation |
| */ |
| enum pldm_pdr_repository_chg_event_change_record_event_data_operation { |
| PLDM_REFRESH_ALL_RECORDS, |
| PLDM_RECORDS_DELETED, |
| PLDM_RECORDS_ADDED, |
| PLDM_RECORDS_MODIFIED |
| }; |
| |
| /** @brief PLDM NumericSensorStatePresentReading data type |
| */ |
| enum pldm_sensor_readings_data_type { |
| PLDM_SENSOR_DATA_SIZE_UINT8, |
| PLDM_SENSOR_DATA_SIZE_SINT8, |
| PLDM_SENSOR_DATA_SIZE_UINT16, |
| PLDM_SENSOR_DATA_SIZE_SINT16, |
| PLDM_SENSOR_DATA_SIZE_UINT32, |
| PLDM_SENSOR_DATA_SIZE_SINT32 |
| }; |
| |
| /** @brief PLDM PlatformEventMessage response status |
| */ |
| enum pldm_platform_event_status { |
| PLDM_EVENT_NO_LOGGING = 0x00, |
| PLDM_EVENT_LOGGING_DISABLED = 0x01, |
| PLDM_EVENT_LOG_FULL = 0x02, |
| PLDM_EVENT_ACCEPTED_FOR_LOGGING = 0x03, |
| PLDM_EVENT_LOGGED = 0x04, |
| PLDM_EVENT_LOGGING_REJECTED = 0x05 |
| }; |
| |
| /** @struct pldm_pdr_hdr |
| * |
| * Structure representing PLDM common PDR header |
| */ |
| struct pldm_pdr_hdr { |
| uint32_t record_handle; |
| uint8_t version; |
| uint8_t type; |
| uint16_t record_change_num; |
| uint16_t length; |
| } __attribute__((packed)); |
| |
| /** @struct pldm_pdr_entity_association |
| * |
| * Structure representing PLDM Entity Association PDR |
| */ |
| struct pldm_pdr_entity_association { |
| uint16_t container_id; |
| uint8_t association_type; |
| pldm_entity container; |
| uint8_t num_children; |
| pldm_entity children[1]; |
| } __attribute__((packed)); |
| |
| /** @struct pldm_pdr_fru_record_set |
| * |
| * Structure representing PLDM FRU record set PDR |
| */ |
| struct pldm_pdr_fru_record_set { |
| uint16_t terminus_handle; |
| uint16_t fru_rsi; |
| uint16_t entity_type; |
| uint16_t entity_instance_num; |
| uint16_t container_id; |
| } __attribute__((packed)); |
| |
| /** @struct pldm_state_sensor_pdr |
| * |
| * Structure representing PLDM state sensor PDR |
| */ |
| struct pldm_state_sensor_pdr { |
| struct pldm_pdr_hdr hdr; |
| uint16_t terminus_handle; |
| uint16_t sensor_id; |
| uint16_t entity_type; |
| uint16_t entity_instance; |
| uint16_t container_id; |
| uint8_t sensor_init; |
| bool8_t sensor_auxiliary_names_pdr; |
| uint8_t composite_sensor_count; |
| uint8_t possible_states[1]; |
| } __attribute__((packed)); |
| |
| /** @struct state_sensor_possible_states |
| * |
| * Structure representing state enums for state sensor |
| */ |
| struct state_sensor_possible_states { |
| uint16_t state_set_id; |
| uint8_t possible_states_size; |
| bitfield8_t states[1]; |
| } __attribute__((packed)); |
| |
| /** @struct pldm_state_effecter_pdr |
| * |
| * Structure representing PLDM state effecter PDR |
| */ |
| struct pldm_state_effecter_pdr { |
| struct pldm_pdr_hdr hdr; |
| uint16_t terminus_handle; |
| uint16_t effecter_id; |
| uint16_t entity_type; |
| uint16_t entity_instance; |
| uint16_t container_id; |
| uint16_t effecter_semantic_id; |
| uint8_t effecter_init; |
| bool8_t has_description_pdr; |
| uint8_t composite_effecter_count; |
| uint8_t possible_states[1]; |
| } __attribute__((packed)); |
| |
| /** @brief Encode PLDM state sensor PDR |
| * |
| * @param[in/out] sensor Structure to encode. All members of |
| * sensor, except those mentioned in the @note below, should be initialized by |
| * the caller. |
| * @param[in] allocation_size Size of sensor allocation in bytes |
| * @param[in] possible_states Possible sensor states |
| * @param[in] possible_states_size Size of possible sensor states in bytes |
| * @param[out] actual_size Size of sensor PDR. Set to 0 on error. |
| * @return int pldm_completion_codes |
| * PLDM_SUCCESS/PLDM_ERROR/PLDM_ERROR_INVALID_LENGTH |
| * |
| * @note The sensor parameter will be encoded in place. |
| * @note Caller is responsible for allocation of the sensor parameter. Caller |
| * must allocate enough space for the base structure and the |
| * sensor->possible_states array, otherwise the function will fail. |
| * @note sensor->hdr.length, .type, and .version will be set appropriately. |
| */ |
| int encode_state_sensor_pdr( |
| struct pldm_state_sensor_pdr *sensor, size_t allocation_size, |
| const struct state_sensor_possible_states *possible_states, |
| size_t possible_states_size, size_t *actual_size); |
| |
| /** @union union_effecter_data_size |
| * |
| * The bit width and format of reading and threshold values that the effecter |
| * returns. |
| * Refer to: DSP0248_1.2.0: 28.11 Table 87 |
| */ |
| typedef union { |
| uint8_t value_u8; |
| int8_t value_s8; |
| uint16_t value_u16; |
| int16_t value_s16; |
| uint32_t value_u32; |
| int32_t value_s32; |
| } union_effecter_data_size; |
| |
| /** @union union_range_field_format |
| * |
| * Indicates the format used for the nominalValue, normalMax, and normalMin |
| * fields. |
| * Refer to: DSP0248_1.2.0: 28.11 Table 87 |
| */ |
| typedef union { |
| uint8_t value_u8; |
| int8_t value_s8; |
| uint16_t value_u16; |
| int16_t value_s16; |
| uint32_t value_u32; |
| int32_t value_s32; |
| real32_t value_f32; |
| } union_range_field_format; |
| |
| /** @struct pldm_numeric_effecter_value_pdr |
| * |
| * Structure representing PLDM numeric effecter value PDR |
| */ |
| struct pldm_numeric_effecter_value_pdr { |
| struct pldm_pdr_hdr hdr; |
| uint16_t terminus_handle; |
| uint16_t effecter_id; |
| uint16_t entity_type; |
| uint16_t entity_instance; |
| uint16_t container_id; |
| uint16_t effecter_semantic_id; |
| uint8_t effecter_init; |
| bool8_t effecter_auxiliary_names; |
| uint8_t base_unit; |
| int8_t unit_modifier; |
| uint8_t rate_unit; |
| uint8_t base_oem_unit_handle; |
| uint8_t aux_unit; |
| int8_t aux_unit_modifier; |
| uint8_t aux_rate_unit; |
| uint8_t aux_oem_unit_handle; |
| bool8_t is_linear; |
| uint8_t effecter_data_size; |
| real32_t resolution; |
| real32_t offset; |
| uint16_t accuracy; |
| uint8_t plus_tolerance; |
| uint8_t minus_tolerance; |
| real32_t state_transition_interval; |
| real32_t transition_interval; |
| union_effecter_data_size max_set_table; |
| union_effecter_data_size min_set_table; |
| uint8_t range_field_format; |
| bitfield8_t range_field_support; |
| union_range_field_format nominal_value; |
| union_range_field_format normal_max; |
| union_range_field_format normal_min; |
| union_range_field_format rated_max; |
| union_range_field_format rated_min; |
| } __attribute__((packed)); |
| |
| /** @struct state_effecter_possible_states |
| * |
| * Structure representing state enums for state effecter |
| */ |
| struct state_effecter_possible_states { |
| uint16_t state_set_id; |
| uint8_t possible_states_size; |
| bitfield8_t states[1]; |
| } __attribute__((packed)); |
| |
| /** @brief Encode PLDM state effecter PDR |
| * |
| * @param[in/out] effecter Structure to encode. All members of |
| * effecter, except those mentioned in |
| * the @note below, should be initialized |
| * by the caller. |
| * @param[in] allocation_size Size of effecter allocation in bytes |
| * @param[in] possible_states Possible effecter states |
| * @param[in] possible_states_size Size of possible effecter states in |
| * bytes |
| * @param[out] actual_size Size of effecter PDR. Set to 0 on |
| * error. |
| * @return int pldm_completion_codes |
| * PLDM_SUCCESS/PLDM_ERROR/PLDM_ERROR_INVALID_LENGTH |
| * |
| * @note The effecter parameter will be encoded in place. |
| * @note Caller is responsible for allocation of the effecter parameter. Caller |
| * must allocate enough space for the base structure and the |
| * effecter->possible_states array, otherwise the function will fail. |
| * @note effecter->hdr.length, .type, and .version will be set appropriately. |
| */ |
| int encode_state_effecter_pdr( |
| struct pldm_state_effecter_pdr *effecter, size_t allocation_size, |
| const struct state_effecter_possible_states *possible_states, |
| size_t possible_states_size, size_t *actual_size); |
| |
| /** @struct set_effecter_state_field |
| * |
| * Structure representing a stateField in SetStateEffecterStates command */ |
| |
| typedef struct state_field_for_state_effecter_set { |
| uint8_t set_request; //!< Whether to change the state |
| uint8_t effecter_state; //!< Expected state of the effecter |
| } __attribute__((packed)) set_effecter_state_field; |
| |
| /** @struct get_sensor_readings_field |
| * |
| * Structure representing a stateField in GetStateSensorReadings command */ |
| |
| typedef struct state_field_for_get_state_sensor_readings { |
| uint8_t sensor_op_state; //!< The state of the sensor itself |
| uint8_t present_state; //!< Return a state value |
| uint8_t previous_state; //!< The state that the presentState was entered |
| //! from. This must be different from the |
| //! present state |
| uint8_t event_state; //!< Return a state value from a PLDM State Set |
| //! that is associated with the sensor |
| } __attribute__((packed)) get_sensor_state_field; |
| |
| /** @struct PLDM_SetStateEffecterStates_Request |
| * |
| * Structure representing PLDM set state effecter states request. |
| */ |
| struct pldm_set_state_effecter_states_req { |
| uint16_t effecter_id; |
| uint8_t comp_effecter_count; |
| set_effecter_state_field field[8]; |
| } __attribute__((packed)); |
| |
| /** @struct pldm_get_pdr_resp |
| * |
| * structure representing GetPDR response packet |
| * transfer CRC is not part of the structure and will be |
| * added at the end of last packet in multipart transfer |
| */ |
| struct pldm_get_pdr_resp { |
| uint8_t completion_code; |
| uint32_t next_record_handle; |
| uint32_t next_data_transfer_handle; |
| uint8_t transfer_flag; |
| uint16_t response_count; |
| uint8_t record_data[1]; |
| } __attribute__((packed)); |
| |
| /** @struct pldm_get_pdr_req |
| * |
| * structure representing GetPDR request packet |
| */ |
| struct pldm_get_pdr_req { |
| uint32_t record_handle; |
| uint32_t data_transfer_handle; |
| uint8_t transfer_op_flag; |
| uint16_t request_count; |
| uint16_t record_change_number; |
| } __attribute__((packed)); |
| |
| /** @struct pldm_set_numeric_effecter_value_req |
| * |
| * structure representing SetNumericEffecterValue request packet |
| */ |
| struct pldm_set_numeric_effecter_value_req { |
| uint16_t effecter_id; |
| uint8_t effecter_data_size; |
| uint8_t effecter_value[1]; |
| } __attribute__((packed)); |
| |
| /** @struct pldm_get_state_sensor_readings_req |
| * |
| * Structure representing PLDM get state sensor readings request. |
| */ |
| struct pldm_get_state_sensor_readings_req { |
| uint16_t sensor_id; |
| bitfield8_t sensor_rearm; |
| uint8_t reserved; |
| } __attribute__((packed)); |
| |
| /** @struct pldm_get_state_sensor_readings_resp |
| * |
| * Structure representing PLDM get state sensor readings response. |
| */ |
| struct pldm_get_state_sensor_readings_resp { |
| uint8_t completion_code; |
| uint8_t comp_sensor_count; |
| get_sensor_state_field field[1]; |
| } __attribute__((packed)); |
| |
| /** @struct pldm_sensor_event |
| * |
| * structure representing sensorEventClass |
| */ |
| struct pldm_sensor_event_data { |
| uint16_t sensor_id; |
| uint8_t sensor_event_class_type; |
| uint8_t event_class[1]; |
| } __attribute__((packed)); |
| |
| /** @struct pldm_state_sensor_state |
| * |
| * structure representing sensorEventClass for stateSensorState |
| */ |
| struct pldm_sensor_event_state_sensor_state { |
| uint8_t sensor_offset; |
| uint8_t event_state; |
| uint8_t previous_event_state; |
| } __attribute__((packed)); |
| |
| /** @struct pldm_sensor_event_numeric_sensor_state |
| * |
| * structure representing sensorEventClass for stateSensorState |
| */ |
| struct pldm_sensor_event_numeric_sensor_state { |
| uint8_t event_state; |
| uint8_t previous_event_state; |
| uint8_t sensor_data_size; |
| uint8_t present_reading[1]; |
| } __attribute__((packed)); |
| |
| /** @struct pldm_sensor_event_sensor_op_state |
| * |
| * structure representing sensorEventClass for SensorOpState |
| */ |
| struct pldm_sensor_event_sensor_op_state { |
| uint8_t present_op_state; |
| uint8_t previous_op_state; |
| } __attribute__((packed)); |
| |
| /** @struct pldm_platform_event_message_req |
| * |
| * structure representing PlatformEventMessage command request data |
| */ |
| struct pldm_platform_event_message_req { |
| uint8_t format_version; |
| uint8_t tid; |
| uint8_t event_class; |
| uint8_t event_data[1]; |
| } __attribute__((packed)); |
| |
| /** @struct pldm_platform_event_message_response |
| * |
| * structure representing PlatformEventMessage command response data |
| */ |
| struct pldm_platform_event_message_resp { |
| uint8_t completion_code; |
| uint8_t platform_event_status; |
| } __attribute__((packed)); |
| |
| /** @struct pldm_pdr_repository_chg_event_data |
| * |
| * structure representing pldmPDRRepositoryChgEvent class eventData |
| */ |
| struct pldm_pdr_repository_chg_event_data { |
| uint8_t event_data_format; |
| uint8_t number_of_change_records; |
| uint8_t change_records[1]; |
| } __attribute__((packed)); |
| |
| /** @struct pldm_pdr_repository_chg_event_change_record_data |
| * |
| * structure representing pldmPDRRepositoryChgEvent class eventData's change |
| * record data |
| */ |
| struct pldm_pdr_repository_change_record_data { |
| uint8_t event_data_operation; |
| uint8_t number_of_change_entries; |
| uint32_t change_entry[1]; |
| } __attribute__((packed)); |
| |
| /** @struct pldm_get_numeric_effecter_value_req |
| * |
| * structure representing GetNumericEffecterValue request packet |
| */ |
| struct pldm_get_numeric_effecter_value_req { |
| uint16_t effecter_id; |
| } __attribute__((packed)); |
| |
| /** @struct pldm_get_numeric_effecter_value_resp |
| * |
| * structure representing GetNumericEffecterValue response packet |
| */ |
| struct pldm_get_numeric_effecter_value_resp { |
| uint8_t completion_code; |
| uint8_t effecter_data_size; |
| uint8_t effecter_oper_state; |
| uint8_t pending_and_present_values[1]; |
| } __attribute__((packed)); |
| |
| /** @struct pldm_get_sensor_reading_req |
| * |
| * Structure representing PLDM get sensor reading request |
| */ |
| struct pldm_get_sensor_reading_req { |
| uint16_t sensor_id; |
| bool8_t rearm_event_state; |
| } __attribute__((packed)); |
| |
| /** @struct pldm_get_sensor_reading_resp |
| * |
| * Structure representing PLDM get sensor reading response |
| */ |
| struct pldm_get_sensor_reading_resp { |
| uint8_t completion_code; |
| uint8_t sensor_data_size; |
| uint8_t sensor_operational_state; |
| uint8_t sensor_event_message_enable; |
| uint8_t present_state; |
| uint8_t previous_state; |
| uint8_t event_state; |
| uint8_t present_reading[1]; |
| } __attribute__((packed)); |
| |
| /* Responder */ |
| |
| /* SetNumericEffecterValue */ |
| |
| /** @brief Decode SetNumericEffecterValue request data |
| * |
| * @param[in] msg - Request message |
| * @param[in] payload_length - Length of request message payload |
| * @param[out] effecter_id - used to identify and access the effecter |
| * @param[out] effecter_data_size - The bit width and format of the setting |
| * value for the effecter. |
| * value:{uint8,sint8,uint16,sint16,uint32,sint32} |
| * @param[out] effecter_value - The setting value of numeric effecter being |
| * requested. |
| * @return pldm_completion_codes |
| */ |
| int decode_set_numeric_effecter_value_req(const struct pldm_msg *msg, |
| size_t payload_length, |
| uint16_t *effecter_id, |
| uint8_t *effecter_data_size, |
| uint8_t *effecter_value); |
| |
| /** @brief Create a PLDM response message for SetNumericEffecterValue |
| * |
| * @param[in] instance_id - Message's instance id |
| * @param[in] completion_code - PLDM completion code |
| * @param[out] msg - Message will be written to this |
| * @param[in] payload_length - Length of request message payload |
| * @return pldm_completion_codes |
| * @note Caller is responsible for memory alloc and dealloc of param |
| * 'msg.body.payload' |
| */ |
| int encode_set_numeric_effecter_value_resp(uint8_t instance_id, |
| uint8_t completion_code, |
| struct pldm_msg *msg, |
| size_t payload_length); |
| |
| /* SetStateEffecterStates */ |
| |
| /** @brief Create a PLDM response message for SetStateEffecterStates |
| * |
| * @param[in] instance_id - Message's instance id |
| * @param[in] completion_code - PLDM completion code |
| * @param[out] msg - Message will be written to this |
| * @return pldm_completion_codes |
| * @note Caller is responsible for memory alloc and dealloc of param |
| * 'msg.body.payload' |
| */ |
| |
| int encode_set_state_effecter_states_resp(uint8_t instance_id, |
| uint8_t completion_code, |
| struct pldm_msg *msg); |
| |
| /** @brief Decode SetStateEffecterStates request data |
| * |
| * @param[in] msg - Request message |
| * @param[in] payload_length - Length of request message payload |
| * @param[out] effecter_id - used to identify and access the effecter |
| * @param[out] comp_effecter_count - number of individual sets of effecter |
| * information. Upto eight sets of state effecter info can be accessed |
| * for a given effecter. |
| * @param[out] field - each unit is an instance of the stateFileld structure |
| * that is used to set the requested state for a particular effecter |
| * within the state effecter. This field holds the starting address of |
| * the stateField values. The user is responsible to allocate the |
| * memory prior to calling this command. Since the state field count is |
| * not known in advance, the user should allocate the maximum size |
| * always, which is 8 in number. |
| * @return pldm_completion_codes |
| */ |
| |
| int decode_set_state_effecter_states_req(const struct pldm_msg *msg, |
| size_t payload_length, |
| uint16_t *effecter_id, |
| uint8_t *comp_effecter_count, |
| set_effecter_state_field *field); |
| |
| /* GetPDR */ |
| |
| /** @brief Create a PLDM response message for GetPDR |
| * |
| * @param[in] instance_id - Message's instance id |
| * @param[in] completion_code - PLDM completion code |
| * @param[in] next_record_hndl - The recordHandle for the PDR that is next in |
| * the PDR Repository |
| * @param[in] next_data_transfer_hndl - A handle that identifies the next |
| * portion of the PDR data to be transferred, if any |
| * @param[in] transfer_flag - Indicates the portion of PDR data being |
| * transferred |
| * @param[in] resp_cnt - The number of recordData bytes returned in this |
| * response |
| * @param[in] record_data - PDR data bytes of length resp_cnt |
| * @param[in] transfer_crc - A CRC-8 for the overall PDR. This is present only |
| * in the last part of a PDR being transferred |
| * @param[out] msg - Message will be written to this |
| * @return pldm_completion_codes |
| * @note Caller is responsible for memory alloc and dealloc of param |
| * 'msg.payload' |
| */ |
| int encode_get_pdr_resp(uint8_t instance_id, uint8_t completion_code, |
| uint32_t next_record_hndl, |
| uint32_t next_data_transfer_hndl, uint8_t transfer_flag, |
| uint16_t resp_cnt, const uint8_t *record_data, |
| uint8_t transfer_crc, struct pldm_msg *msg); |
| |
| /** @brief Decode GetPDR request data |
| * |
| * @param[in] msg - Request message |
| * @param[in] payload_length - Length of request message payload |
| * @param[out] record_hndl - The recordHandle value for the PDR to be retrieved |
| * @param[out] data_transfer_hndl - Handle used to identify a particular |
| * multipart PDR data transfer operation |
| * @param[out] transfer_op_flag - Flag to indicate the first or subsequent |
| * portion of transfer |
| * @param[out] request_cnt - The maximum number of record bytes requested |
| * @param[out] record_chg_num - Used to determine whether the PDR has changed |
| * while PDR transfer is going on |
| * @return pldm_completion_codes |
| */ |
| |
| int decode_get_pdr_req(const struct pldm_msg *msg, size_t payload_length, |
| uint32_t *record_hndl, uint32_t *data_transfer_hndl, |
| uint8_t *transfer_op_flag, uint16_t *request_cnt, |
| uint16_t *record_chg_num); |
| |
| /* GetStateSensorReadings */ |
| |
| /** @brief Decode GetStateSensorReadings request data |
| * |
| * @param[in] msg - Request message |
| * @param[in] payload_length - Length of request message payload |
| * @param[out] sensor_id - used to identify and access the simple or composite |
| * sensor |
| * @param[out] sensor_rearm - Each bit location in this field corresponds to a |
| * particular sensor within the state sensor, where bit [0] corresponds |
| * to the first state sensor (sensor offset 0) and bit [7] corresponds |
| * to the eighth sensor (sensor offset 7), sequentially. |
| * @param[out] reserved - value: 0x00 |
| * @return pldm_completion_codes |
| */ |
| |
| int decode_get_state_sensor_readings_req(const struct pldm_msg *msg, |
| size_t payload_length, |
| uint16_t *sensor_id, |
| bitfield8_t *sensor_rearm, |
| uint8_t *reserved); |
| |
| /** @brief Encode GetStateSensorReadings response data |
| * |
| * @param[in] instance_id - Message's instance id |
| * @param[in] completion_code - PLDM completion code |
| * @param[out] comp_sensor_count - The number of individual sets of sensor |
| * information that this command accesses |
| * @param[out] field - Each stateField is an instance of a stateField structure |
| * that is used to return the present operational state setting and the |
| * present state and event state for a particular set of sensor |
| * information contained within the state sensor |
| * @param[out] msg - Message will be written to this |
| * @return pldm_completion_codes |
| */ |
| |
| int encode_get_state_sensor_readings_resp(uint8_t instance_id, |
| uint8_t completion_code, |
| uint8_t comp_sensor_count, |
| get_sensor_state_field *field, |
| struct pldm_msg *msg); |
| |
| /* GetNumericEffecterValue */ |
| |
| /** @brief Decode GetNumericEffecterValue request data |
| * |
| * @param[in] msg - Request message |
| * @param[in] payload_length - Length of request message payload |
| * @param[out] effecter_id - used to identify and access the effecter |
| * @return pldm_completion_codes |
| */ |
| int decode_get_numeric_effecter_value_req(const struct pldm_msg *msg, |
| size_t payload_length, |
| uint16_t *effecter_id); |
| |
| /** @brief Create a PLDM response message for GetNumericEffecterValue |
| * |
| * @param[in] instance_id - Message's instance id |
| * @param[in] completion_code - PLDM completion code |
| * @param[in] effecter_data_size - The bit width and format of the setting |
| * value for the effecter. |
| * value:{uint8,sint8,uint16,sint16,uint32,sint32} |
| * @param[in] effecter_oper_state - The state of the effecter itself |
| * @param[in] pending_value - The pending numeric value setting of the |
| * effecter. The effecterDataSize field indicates the number of |
| * bits used for this field |
| * @param[in] present_value - The present numeric value setting of the |
| * effecter. The effecterDataSize indicates the number of bits |
| * used for this field |
| * @param[out] msg - Message will be written to this |
| * @param[in] payload_length - Length of request message payload |
| * @return pldm_completion_codes |
| * @note Caller is responsible for memory alloc and dealloc of param |
| * 'msg.payload' |
| */ |
| int encode_get_numeric_effecter_value_resp( |
| uint8_t instance_id, uint8_t completion_code, uint8_t effecter_data_size, |
| uint8_t effecter_oper_state, uint8_t *pending_value, uint8_t *present_value, |
| struct pldm_msg *msg, size_t payload_length); |
| |
| /* GetSensorReading */ |
| |
| /** @brief Decode GetSensorReading request data |
| * |
| * @param[in] msg - Request message |
| * @param[in] payload_length - Length of request message payload |
| * @param[out] sensor_id - A handle that is used to identify and access |
| * the sensor |
| * @param[out] rearm_event_state - true = manually re-arm EventState after |
| * responding to this request, false = no manual re-arm |
| * @return pldm_completion_codes |
| */ |
| |
| int decode_get_sensor_reading_req(const struct pldm_msg *msg, |
| size_t payload_length, uint16_t *sensor_id, |
| bool8_t *rearm_event_state); |
| |
| /** @brief Encode GetSensorReading response data |
| * |
| * @param[in] instance_id - Message's instance id |
| * @param[in] completion_code - PLDM completion code |
| * @param[out] sensor_data_size - The bit width and format of reading and |
| * threshold values |
| * @param[out] sensor_operational_state - The state of the sensor itself |
| * @param[out] sensor_event_message_enable - value: { noEventGeneration, |
| * eventsDisabled, eventsEnabled, opEventsOnlyEnabled, |
| * stateEventsOnlyEnabled } |
| * @param[out] present_state - The most recently assessed state value monitored |
| * by the sensor |
| * @param[out] previous_state - The state that the presentState was entered |
| * from |
| * @param[out] event_state - Indicates which threshold crossing assertion |
| * events have been detected |
| * @param[out] present_reading - The present value indicated by the sensor |
| * @param[out] msg - Message will be written to this |
| * @param[in] payload_length - Length of request message payload |
| * @return pldm_completion_codes |
| */ |
| |
| int encode_get_sensor_reading_resp( |
| uint8_t instance_id, uint8_t completion_code, uint8_t sensor_data_size, |
| uint8_t sensor_operational_state, uint8_t sensor_event_message_enable, |
| uint8_t present_state, uint8_t previous_state, uint8_t event_state, |
| uint8_t *present_reading, struct pldm_msg *msg, size_t payload_length); |
| |
| /* Requester */ |
| |
| /* GetPDR */ |
| |
| /** @brief Create a PLDM request message for GetPDR |
| * |
| * @param[in] instance_id - Message's instance id |
| * @param[in] record_hndl - The recordHandle value for the PDR to be retrieved |
| * @param[in] data_transfer_hndl - Handle used to identify a particular |
| * multipart PDR data transfer operation |
| * @param[in] transfer_op_flag - Flag to indicate the first or subsequent |
| * portion of transfer |
| * @param[in] request_cnt - The maximum number of record bytes requested |
| * @param[in] record_chg_num - Used to determine whether the PDR has changed |
| * while PDR transfer is going on |
| * @param[out] msg - Message will be written to this |
| * @param[in] payload_length - Length of request message payload |
| * @return pldm_completion_codes |
| * @note Caller is responsible for memory alloc and dealloc of param |
| * 'msg.payload' |
| */ |
| int encode_get_pdr_req(uint8_t instance_id, uint32_t record_hndl, |
| uint32_t data_transfer_hndl, uint8_t transfer_op_flag, |
| uint16_t request_cnt, uint16_t record_chg_num, |
| struct pldm_msg *msg, size_t payload_length); |
| |
| /** @brief Decode GetPDR response data |
| * |
| * Note: |
| * * If the return value is not PLDM_SUCCESS, it represents a |
| * transport layer error. |
| * * If the completion_code value is not PLDM_SUCCESS, it represents a |
| * protocol layer error and all the out-parameters are invalid. |
| * |
| * @param[in] msg - Request message |
| * @param[in] payload_length - Length of request message payload |
| * @param[out] completion_code - PLDM completion code |
| * @param[out] next_record_hndl - The recordHandle for the PDR that is next in |
| * the PDR Repository |
| * @param[out] next_data_transfer_hndl - A handle that identifies the next |
| * portion of the PDR data to be transferred, if any |
| * @param[out] transfer_flag - Indicates the portion of PDR data being |
| * transferred |
| * @param[out] resp_cnt - The number of recordData bytes returned in this |
| * response |
| * @param[out] record_data - PDR data bytes of length resp_cnt, or NULL to |
| * skip the copy and place the actual length in resp_cnt. |
| * @param[in] record_data_length - Length of record_data |
| * @param[out] transfer_crc - A CRC-8 for the overall PDR. This is present only |
| * in the last part of a PDR being transferred |
| * @return pldm_completion_codes |
| */ |
| int decode_get_pdr_resp(const struct pldm_msg *msg, size_t payload_length, |
| uint8_t *completion_code, uint32_t *next_record_hndl, |
| uint32_t *next_data_transfer_hndl, |
| uint8_t *transfer_flag, uint16_t *resp_cnt, |
| uint8_t *record_data, size_t record_data_length, |
| uint8_t *transfer_crc); |
| |
| /* SetStateEffecterStates */ |
| |
| /** @brief Create a PLDM request message for SetStateEffecterStates |
| * |
| * @param[in] instance_id - Message's instance id |
| * @param[in] effecter_id - used to identify and access the effecter |
| * @param[in] comp_effecter_count - number of individual sets of effecter |
| * information. Upto eight sets of state effecter info can be accessed |
| * for a given effecter. |
| * @param[in] field - each unit is an instance of the stateField structure |
| * that is used to set the requested state for a particular effecter |
| * within the state effecter. This field holds the starting address of |
| * the stateField values. The user is responsible to allocate the |
| * memory prior to calling this command. The user has to allocate the |
| * field parameter as sizeof(set_effecter_state_field) * |
| * comp_effecter_count |
| * @param[out] msg - Message will be written to this |
| * @return pldm_completion_codes |
| * @note Caller is responsible for memory alloc and dealloc of param |
| * 'msg.payload' |
| */ |
| |
| int encode_set_state_effecter_states_req(uint8_t instance_id, |
| uint16_t effecter_id, |
| uint8_t comp_effecter_count, |
| set_effecter_state_field *field, |
| struct pldm_msg *msg); |
| |
| /** @brief Decode SetStateEffecterStates response data |
| * |
| * Note: |
| * * If the return value is not PLDM_SUCCESS, it represents a |
| * transport layer error. |
| * * If the completion_code value is not PLDM_SUCCESS, it represents a |
| * protocol layer error and all the out-parameters are invalid. |
| * |
| * @param[in] msg - Request message |
| * @param[in] payload_length - Length of response message payload |
| * @param[out] completion_code - PLDM completion code |
| * @return pldm_completion_codes |
| */ |
| int decode_set_state_effecter_states_resp(const struct pldm_msg *msg, |
| size_t payload_length, |
| uint8_t *completion_code); |
| |
| /* SetNumericEffecterValue */ |
| |
| /** @brief Create a PLDM request message for SetNumericEffecterValue |
| * |
| * @param[in] instance_id - Message's instance id |
| * @param[in] effecter_id - used to identify and access the effecter |
| * @param[in] effecter_data_size - The bit width and format of the setting |
| * value for the effecter. |
| * value:{uint8,sint8,uint16,sint16,uint32,sint32} |
| * @param[in] effecter_value - The setting value of numeric effecter being |
| * requested. |
| * @param[in] payload_length - Length of request message payload |
| * @param[out] msg - Message will be written to this |
| * @return pldm_completion_codes |
| * @note Caller is responsible for memory alloc and dealloc of param |
| * 'msg.payload' |
| */ |
| int encode_set_numeric_effecter_value_req( |
| uint8_t instance_id, uint16_t effecter_id, uint8_t effecter_data_size, |
| uint8_t *effecter_value, struct pldm_msg *msg, size_t payload_length); |
| |
| /** @brief Decode SetNumericEffecterValue response data |
| * @param[in] msg - Request message |
| * @param[in] payload_length - Length of response message payload |
| * @param[out] completion_code - PLDM completion code |
| * @return pldm_completion_codes |
| */ |
| int decode_set_numeric_effecter_value_resp(const struct pldm_msg *msg, |
| size_t payload_length, |
| uint8_t *completion_code); |
| |
| /** @brief Create a PLDM request message for GetStateSensorReadings |
| * |
| * @param[in] instance_id - Message's instance id |
| * @param[in] sensor_id - used to identify and access the simple or composite |
| * sensor |
| * @param[in] sensorRearm - Each bit location in this field corresponds to a |
| * particular sensor within the state sensor, where bit [0] corresponds |
| * to the first state sensor (sensor offset 0) and bit [7] corresponds |
| * to the eighth sensor (sensor offset 7), sequentially |
| * @param[in] reserved - value: 0x00 |
| * @param[out] msg - Message will be written to this |
| * @return pldm_completion_codes |
| * @note Caller is responsible for memory alloc and dealloc of param |
| * 'msg.payload' |
| */ |
| int encode_get_state_sensor_readings_req(uint8_t instance_id, |
| uint16_t sensor_id, |
| bitfield8_t sensor_rearm, |
| uint8_t reserved, |
| struct pldm_msg *msg); |
| |
| /** @brief Decode GetStateSensorReadings response data |
| * |
| * @param[in] msg - Request message |
| * @param[in] payload_length - Length of response message payload |
| * @param[out] completion_code - PLDM completion code |
| * @param[in,out] comp_sensor_count - The number of individual sets of sensor |
| * information that this command accesses |
| * @param[out] field - Each stateField is an instance of a stateField structure |
| * that is used to return the present operational state setting and the |
| * present state and event state for a particular set of sensor |
| * information contained within the state sensor |
| * @return pldm_completion_codes |
| */ |
| |
| int decode_get_state_sensor_readings_resp(const struct pldm_msg *msg, |
| size_t payload_length, |
| uint8_t *completion_code, |
| uint8_t *comp_sensor_count, |
| get_sensor_state_field *field); |
| |
| /* PlatformEventMessage */ |
| |
| /** @brief Decode PlatformEventMessage request data |
| * @param[in] msg - Request message |
| * @param[in] payload_length - Length of response message payload |
| * @param[out] format_version - Version of the event format |
| * @param[out] tid - Terminus ID for the terminus that originated the event |
| * message |
| * @param[out] event_class - The class of event being sent |
| * @param[out] event_data_offset - Offset where the event data should be read |
| * from pldm msg |
| * @return pldm_completion_codes |
| */ |
| int decode_platform_event_message_req(const struct pldm_msg *msg, |
| size_t payload_length, |
| uint8_t *format_version, uint8_t *tid, |
| uint8_t *event_class, |
| size_t *event_data_offset); |
| |
| /** @brief Encode PlatformEventMessage response data |
| * @param[in] instance_id - Message's instance id |
| * @param[in] completion_code - PLDM completion code |
| * @param[in] platform_event_status - Response status of the event message |
| * command |
| * @param[out] msg - Message will be written to this |
| * @return pldm_completion_codes |
| * @note Caller is responsible for memory alloc and dealloc of param |
| * 'msg.payload' |
| */ |
| int encode_platform_event_message_resp(uint8_t instance_id, |
| uint8_t completion_code, |
| uint8_t platform_event_status, |
| struct pldm_msg *msg); |
| |
| /** @brief Encode PlatformEventMessage request data |
| * @param[in] instance_id - Message's instance id |
| * @param[in] format_version - Version of the event format |
| * @param[in] tid - Terminus ID for the terminus that originated the event |
| * message |
| * @param[in] event_class - The class of event being sent |
| * @param[in] event_data - the event data should be read from pldm msg |
| * @param[in] event_data_length - Length of the event data |
| * @param[out] msg - Request message |
| * @return pldm_completion_codes |
| * @note Caller is responsible for memory alloc and dealloc of param |
| * 'msg.payload' |
| */ |
| int encode_platform_event_message_req( |
| uint8_t instance_id, uint8_t format_version, uint8_t tid, |
| uint8_t event_class, const uint8_t *event_data, size_t event_data_length, |
| struct pldm_msg *msg, size_t payload_length); |
| |
| /** @brief Decode PlatformEventMessage response data |
| * @param[in] msg - Request message |
| * @param[in] payload_length - Length of Response message payload |
| * @param[out] completion_code - PLDM completion code |
| * @param[out] platform_event_status - Response status of the event message |
| * command |
| * @return pldm_completion_codes |
| */ |
| int decode_platform_event_message_resp(const struct pldm_msg *msg, |
| size_t payload_length, |
| uint8_t *completion_code, |
| uint8_t *platform_event_status); |
| |
| /** @brief Decode sensorEventData response data |
| * |
| * @param[in] event_data - event data from the response message |
| * @param[in] event_data_length - length of the event data |
| * @param[out] sensor_id - sensorID value of the sensor |
| * @param[out] sensor_event_class_type - Type of sensor event class |
| * @param[out] event_class_data_offset - Offset where the event class data |
| * should be read from event data |
| * @return pldm_completion_codes |
| * @note Caller is responsible for memory alloc and dealloc of param |
| * 'event_data' |
| */ |
| int decode_sensor_event_data(const uint8_t *event_data, |
| size_t event_data_length, uint16_t *sensor_id, |
| uint8_t *sensor_event_class_type, |
| size_t *event_class_data_offset); |
| |
| /** @brief Decode sensorOpState response data |
| * |
| * @param[in] sensor_data - sensor_data for sensorEventClass = sensorOpState |
| * @param[in] sensor_data_length - Length of sensor_data |
| * @param[out] present_op_state - The sensorOperationalState value from the |
| * state change that triggered the event message |
| * @param[out] previous_op_state - The sensorOperationalState value for the |
| * state from which the present state was entered |
| * @return pldm_completion_codes |
| * @note Caller is responsible for memory alloc and dealloc of param |
| * 'sensor_data' |
| */ |
| int decode_sensor_op_data(const uint8_t *sensor_data, size_t sensor_data_length, |
| uint8_t *present_op_state, |
| uint8_t *previous_op_state); |
| |
| /** @brief Decode stateSensorState response data |
| * |
| * @param[in] sensor_data - sensor_data for sensorEventClass = stateSensorState |
| * @param[in] sensor_data_length - Length of sensor_data |
| * @param[out] sensor_offset - Identifies which state sensor within a composite |
| * state sensor the event is being returned for |
| * @param[out] event_state - The event state value from the state change that |
| * triggered the event message |
| * @param[out] previous_event_state - The event state value for the state from |
| * which the present event state was entered |
| * @return pldm_completion_codes |
| * @note Caller is responsible for memory alloc and dealloc of param |
| * 'sensor_data' |
| */ |
| int decode_state_sensor_data(const uint8_t *sensor_data, |
| size_t sensor_data_length, uint8_t *sensor_offset, |
| uint8_t *event_state, |
| uint8_t *previous_event_state); |
| |
| /** @brief Decode numericSensorState response data |
| * |
| * @param[in] sensor_data - sensor_data for sensorEventClass = |
| * numericSensorState |
| * @param[in] sensor_data_length - Length of sensor_data |
| * @param[out] event_state - The eventState value from the state change that |
| * triggered the event message |
| * @param[out] previous_event_state - The eventState value for the state from |
| * which the present state was entered |
| * @param[out] sensor_data_size - The bit width and format of reading and |
| * threshold values that the sensor returns |
| * @param[out] present_reading - The present value indicated by the sensor |
| * @return pldm_completion_codes |
| * @note Caller is responsible for memory alloc and dealloc of param |
| * 'sensor_data' |
| */ |
| int decode_numeric_sensor_data(const uint8_t *sensor_data, |
| size_t sensor_data_length, uint8_t *event_state, |
| uint8_t *previous_event_state, |
| uint8_t *sensor_data_size, |
| uint32_t *present_reading); |
| |
| /* GetNumericEffecterValue */ |
| |
| /** @brief Create a PLDM request message for GetNumericEffecterValue |
| * |
| * @param[in] instance_id - Message's instance id |
| * @param[in] effecter_id - used to identify and access the effecter |
| * @param[out] msg - Message will be written to this |
| * @return pldm_completion_codes |
| * @note Caller is responsible for memory alloc and dealloc of param |
| * 'msg.payload' |
| */ |
| int encode_get_numeric_effecter_value_req(uint8_t instance_id, |
| uint16_t effecter_id, |
| struct pldm_msg *msg); |
| |
| /** @brief Create a PLDM response message for GetNumericEffecterValue |
| * |
| * @param[in] msg - Request message |
| * @param[in] payload_length - Length of request message payload |
| * @param[out] completion_code - PLDM completion code |
| * @param[out] effecter_data_size - The bit width and format of the setting |
| * value for the effecter. |
| * value:{uint8,sint8,uint16,sint16,uint32,sint32} |
| * @param[out] effecter_oper_state - The state of the effecter itself |
| * @param[out] pending_value - The pending numeric value setting of the |
| * effecter. The effecterDataSize field indicates the number of |
| * bits used for this field |
| * @param[out] present_value - The present numeric value setting of the |
| * effecter. The effecterDataSize indicates the number of bits |
| * used for this field |
| * @return pldm_completion_codes |
| */ |
| int decode_get_numeric_effecter_value_resp( |
| const struct pldm_msg *msg, size_t payload_length, uint8_t *completion_code, |
| uint8_t *effecter_data_size, uint8_t *effecter_oper_state, |
| uint8_t *pending_value, uint8_t *present_value); |
| |
| /** @brief Decode pldmPDRRepositoryChgEvent response data |
| * |
| * @param[in] event_data - eventData for pldmPDRRepositoryChgEvent |
| * @param[in] event_data_size - Length of event_data |
| * @param[out] event_data_format - This field indicates if the changedRecords |
| * are of PDR Types or PDR Record Handles |
| * @param[out] number_of_change_records - The number of changeRecords following |
| * this field |
| * @param[out] change_record_data_offset - Identifies where changeRecord data |
| * is located within event_data |
| * @return pldm_completion_codes |
| * @note Caller is responsible for memory alloc and dealloc of param |
| * 'event_data' |
| */ |
| int decode_pldm_pdr_repository_chg_event_data( |
| const uint8_t *event_data, size_t event_data_size, |
| uint8_t *event_data_format, uint8_t *number_of_change_records, |
| size_t *change_record_data_offset); |
| |
| /** @brief Encode PLDM PDR Repository Change eventData |
| * @param[in] event_data_format - Format of this event data (e.g. |
| * FORMAT_IS_PDR_HANDLES) |
| * @param[in] number_of_change_records - Number of changeRecords in this |
| * eventData |
| * @param[in] event_data_operations - Array of eventDataOperations |
| * (e.g. RECORDS_ADDED) for each changeRecord in this eventData. This array |
| * should contain number_of_change_records elements. |
| * @param[in] numbers_of_change_entries - Array of numbers of changeEntrys |
| * for each changeRecord in this eventData. This array should contain |
| * number_of_change_records elements. |
| * @param[in] change_entries - 2-dimensional array of arrays of changeEntrys, |
| * one array per changeRecord in this eventData. The toplevel array should |
| * contain number_of_change_records elements. Each subarray [i] should |
| * contain numbers_of_change_entries[i] elements. |
| * @param[in] event_data - The eventData will be encoded into this. This entire |
| * structure must be max_change_records_size long. It must be large enough |
| * to accomodate the data to be encoded. The caller is responsible for |
| * allocating and deallocating it, including the variable-size |
| * 'event_data.change_records' field. If this parameter is NULL, |
| * PLDM_SUCCESS will be returned and actual_change_records_size will be set |
| * to reflect the required size of the structure. |
| * @param[out] actual_change_records_size - The actual number of meaningful |
| * encoded bytes in event_data. The caller can over-allocate memory and use |
| * this output to determine the real size of the structure. |
| * @param[in] max_change_records_size - The size of event_data in bytes. If the |
| * encoded message would be larger than this value, an error is returned. |
| * @return pldm_completion_codes |
| * @note Caller is responsible for memory alloc and dealloc of param |
| * 'event_data.change_records' |
| */ |
| int encode_pldm_pdr_repository_chg_event_data( |
| uint8_t event_data_format, uint8_t number_of_change_records, |
| const uint8_t *event_data_operations, |
| const uint8_t *numbers_of_change_entries, |
| const uint32_t *const *change_entries, |
| struct pldm_pdr_repository_chg_event_data *event_data, |
| size_t *actual_change_records_size, size_t max_change_records_size); |
| |
| /** @brief Encode event data for a PLDM Sensor Event |
| * |
| * @param[out] event_data The object to store the encoded event in |
| * @param[in] event_data_size Size of the allocation for event_data |
| * @param[in] sensor_id Sensor ID |
| * @param[in] sensor_event_class Sensor event class |
| * @param[in] sensor_offset Offset |
| * @param[in] event_state Event state |
| * @param[in] previous_event_state Previous event state |
| * @param[out] actual_event_data_size The real size in bytes of the event_data |
| * @return int pldm_completion_codes PLDM_SUCCESS/PLDM_ERROR_INVALID_LENGTH |
| * @note If event_data is NULL, then *actual_event_data_size will be set to |
| * reflect the size of the event data, and PLDM_SUCCESS will be returned. |
| * @note The caller is responsible for allocating and deallocating the |
| * event_data |
| */ |
| int encode_sensor_event_data(struct pldm_sensor_event_data *event_data, |
| size_t event_data_size, uint16_t sensor_id, |
| enum sensor_event_class_states sensor_event_class, |
| uint8_t sensor_offset, uint8_t event_state, |
| uint8_t previous_event_state, |
| size_t *actual_event_data_size); |
| |
| /** @brief Decode PldmPDRRepositoryChangeRecord response data |
| * |
| * @param[in] change_record_data - changeRecordData for |
| * pldmPDRRepositoryChgEvent |
| * @param[in] change_record_data_size - Length of change_record_data |
| * @param[out] event_data_operation - This field indicates the changeEntries |
| * operation types |
| * @param[out] number_of_change_entries - The number of changeEntries following |
| * this field |
| * @param[out] change_entry_data_offset - Identifies where changeEntries data |
| * is located within change_record_data |
| * @return pldm_completion_codes |
| * @note Caller is responsible for memory alloc and dealloc of param |
| * 'change_record_data' |
| */ |
| int decode_pldm_pdr_repository_change_record_data( |
| const uint8_t *change_record_data, size_t change_record_data_size, |
| uint8_t *event_data_operation, uint8_t *number_of_change_entries, |
| size_t *change_entry_data_offset); |
| |
| /* GetSensorReading */ |
| |
| /** @brief Encode GetSensorReading request data |
| * |
| * @param[in] instance_id - Message's instance id |
| * @param[in] sensor_id - A handle that is used to identify and access the |
| * sensor |
| * @param[in] rearm_event_state - true = manually re-arm EventState after |
| * responding to this request, false = no manual re-arm |
| * @param[out] msg - Message will be written to this |
| * @return pldm_completion_codes |
| * @note Caller is responsible for memory alloc and dealloc of param |
| * 'msg.payload' |
| */ |
| int encode_get_sensor_reading_req(uint8_t instance_id, uint16_t sensor_id, |
| bool8_t rearm_event_state, |
| struct pldm_msg *msg); |
| |
| /** @brief Decode GetSensorReading response data |
| * |
| * @param[in] msg - Request message |
| * @param[in] payload_length - Length of response message payload |
| * @param[out] completion_code - PLDM completion code |
| * @param[out] sensor_data_size - The bit width and format of reading and |
| * threshold values |
| * @param[out] sensor_operational_state - The state of the sensor itself |
| * @param[out] sensor_event_message_enable - value: { noEventGeneration, |
| * eventsDisabled, eventsEnabled, opEventsOnlyEnabled, |
| * stateEventsOnlyEnabled } |
| * @param[out] present_state - The most recently assessed state value monitored |
| * by the sensor |
| * @param[out] previous_state - The state that the presentState was entered |
| * from |
| * @param[out] event_state - Indicates which threshold crossing assertion |
| * events have been detected |
| * @param[out] present_reading - The present value indicated by the sensor |
| * @return pldm_completion_codes |
| */ |
| |
| int decode_get_sensor_reading_resp( |
| const struct pldm_msg *msg, size_t payload_length, uint8_t *completion_code, |
| uint8_t *sensor_data_size, uint8_t *sensor_operational_state, |
| uint8_t *sensor_event_message_enable, uint8_t *present_state, |
| uint8_t *previous_state, uint8_t *event_state, uint8_t *present_reading); |
| |
| #ifdef __cplusplus |
| } |
| #endif |
| |
| #endif /* PLATFORM_H */ |