softoff/softoff.cpp - openbmc/pldm - Gitiles

 #include "config.h"

 #include "softoff.hpp"

 #include "common/utils.hpp"

 #include <libpldm/entity.h>
 #include <libpldm/platform.h>
 #include <libpldm/pldm.h>
 #include <libpldm/state_set.h>

 #include <sdbusplus/bus.hpp>
 #include <sdeventplus/clock.hpp>
 #include <sdeventplus/exception.hpp>
 #include <sdeventplus/source/io.hpp>
 #include <sdeventplus/source/time.hpp>

 #include <array>
 #include <iostream>

 namespace pldm
 {

 using namespace sdeventplus;
 using namespace sdeventplus::source;
 constexpr auto clockId = sdeventplus::ClockId::RealTime;
 using Clock = Clock<clockId>;
 using Timer = Time<clockId>;

 constexpr pldm::pdr::TerminusID TID = 0; // TID will be implemented later.
 namespace sdbusRule = sdbusplus::bus::match::rules;

 SoftPowerOff::SoftPowerOff(sdbusplus::bus_t& bus, sd_event* event) :
     bus(bus), timer(event)
 {
     getHostState();
     if (hasError || completed)
     {
         return;
     }

     auto rc = getEffecterID();
     if (completed)
     {
         std::cerr
             << "pldm-softpoweroff: effecter to initiate softoff not found \n";
         return;
     }
     else if (rc != PLDM_SUCCESS)
     {
         hasError = true;
         return;
     }

     rc = getSensorInfo();
     if (rc != PLDM_SUCCESS)
     {
         std::cerr << "Message get Sensor PDRs error. PLDM error code = "
                   << std::hex << std::showbase << rc << "\n";
         hasError = true;
         return;
     }

     // Matches on the pldm StateSensorEvent signal
     pldmEventSignal = std::make_unique<sdbusplus::bus::match_t>(
         bus,
         sdbusRule::type::signal() + sdbusRule::member("StateSensorEvent") +
             sdbusRule::path("/xyz/openbmc_project/pldm") +
             sdbusRule::interface("xyz.openbmc_project.PLDM.Event"),
         std::bind(std::mem_fn(&SoftPowerOff::hostSoftOffComplete), this,
                   std::placeholders::_1));
 }

 int SoftPowerOff::getHostState()
 {
     try
     {
         pldm::utils::PropertyValue propertyValue =
             pldm::utils::DBusHandler().getDbusPropertyVariant(
                 "/xyz/openbmc_project/state/host0", "CurrentHostState",
                 "xyz.openbmc_project.State.Host");

         if ((std::get<std::string>(propertyValue) !=
              "xyz.openbmc_project.State.Host.HostState.Running") &&
             (std::get<std::string>(propertyValue) !=
              "xyz.openbmc_project.State.Host.HostState.TransitioningToOff"))
         {
             // Host state is not "Running", this app should return success
             completed = true;
             return PLDM_SUCCESS;
         }
     }
     catch (const std::exception& e)
     {
         std::cerr << "PLDM host soft off: Can't get current host state.\n";
         hasError = true;
         return PLDM_ERROR;
     }

     return PLDM_SUCCESS;
 }

 void SoftPowerOff::hostSoftOffComplete(sdbusplus::message_t& msg)
 {
     pldm::pdr::TerminusID msgTID;
     pldm::pdr::SensorID msgSensorID;
     pldm::pdr::SensorOffset msgSensorOffset;
     pldm::pdr::EventState msgEventState;
     pldm::pdr::EventState msgPreviousEventState;

     // Read the msg and populate each variable
     msg.read(msgTID, msgSensorID, msgSensorOffset, msgEventState,
              msgPreviousEventState);

     if (msgSensorID == sensorID && msgSensorOffset == sensorOffset &&
         msgEventState == PLDM_SW_TERM_GRACEFUL_SHUTDOWN)
     {
         // Receive Graceful shutdown completion event message. Disable the timer
         auto rc = timer.stop();
         if (rc < 0)
         {
             std::cerr << "PLDM soft off: Failure to STOP the timer. ERRNO="
                       << rc << "\n";
         }

         // This marks the completion of pldm soft power off.
         completed = true;
     }
 }

 int SoftPowerOff::getEffecterID()
 {
     auto& bus = pldm::utils::DBusHandler::getBus();

     // VMM is a logical entity, so the bit 15 in entity type is set.
     pdr::EntityType entityType = PLDM_ENTITY_VIRTUAL_MACHINE_MANAGER | 0x8000;

     try
     {
         std::vector<std::vector<uint8_t>> VMMResponse{};
         auto VMMMethod = bus.new_method_call(
             "xyz.openbmc_project.PLDM", "/xyz/openbmc_project/pldm",
             "xyz.openbmc_project.PLDM.PDR", "FindStateEffecterPDR");
         VMMMethod.append(TID, entityType,
                          (uint16_t)PLDM_STATE_SET_SW_TERMINATION_STATUS);

         auto VMMResponseMsg = bus.call(VMMMethod);

         VMMResponseMsg.read(VMMResponse);
         if (VMMResponse.size() != 0)
         {
             for (auto& rep : VMMResponse)
             {
                 auto VMMPdr =
                     reinterpret_cast<pldm_state_effecter_pdr*>(rep.data());
                 effecterID = VMMPdr->effecter_id;
             }
         }
         else
         {
             VMMPdrExist = false;
         }
     }
     catch (const sdbusplus::exception_t& e)
     {
         std::cerr << "PLDM soft off: Error get VMM PDR,ERROR=" << e.what()
                   << "\n";
         VMMPdrExist = false;
     }

     if (VMMPdrExist)
     {
         return PLDM_SUCCESS;
     }

     // If the Virtual Machine Manager PDRs doesn't exist, go find the System
     // Firmware PDRs.
     // System Firmware is a logical entity, so the bit 15 in entity type is set
     entityType = PLDM_ENTITY_SYS_FIRMWARE | 0x8000;
     try
     {
         std::vector<std::vector<uint8_t>> sysFwResponse{};
         auto sysFwMethod = bus.new_method_call(
             "xyz.openbmc_project.PLDM", "/xyz/openbmc_project/pldm",
             "xyz.openbmc_project.PLDM.PDR", "FindStateEffecterPDR");
         sysFwMethod.append(TID, entityType,
                            (uint16_t)PLDM_STATE_SET_SW_TERMINATION_STATUS);

         auto sysFwResponseMsg = bus.call(sysFwMethod);

         sysFwResponseMsg.read(sysFwResponse);

         if (sysFwResponse.size() == 0)
         {
             std::cerr
                 << "No effecter ID has been found that matches the criteria"
                 << "\n";
             return PLDM_ERROR;
         }

         for (auto& rep : sysFwResponse)
         {
             auto sysFwPdr =
                 reinterpret_cast<pldm_state_effecter_pdr*>(rep.data());
             effecterID = sysFwPdr->effecter_id;
         }
     }
     catch (const sdbusplus::exception_t& e)
     {
         std::cerr << "PLDM soft off: Error get system firmware PDR,ERROR="
                   << e.what() << "\n";
         completed = true;
         return PLDM_ERROR;
     }

     return PLDM_SUCCESS;
 }

 int SoftPowerOff::getSensorInfo()
 {
     pldm::pdr::EntityType entityType;

     entityType = VMMPdrExist ? PLDM_ENTITY_VIRTUAL_MACHINE_MANAGER
                              : PLDM_ENTITY_SYS_FIRMWARE;

     // The Virtual machine manager/System firmware is logical entity, so bit 15
     // need to be set.
     entityType = entityType | 0x8000;

     try
     {
         auto& bus = pldm::utils::DBusHandler::getBus();
         std::vector<std::vector<uint8_t>> Response{};
         auto method = bus.new_method_call(
             "xyz.openbmc_project.PLDM", "/xyz/openbmc_project/pldm",
             "xyz.openbmc_project.PLDM.PDR", "FindStateSensorPDR");
         method.append(TID, entityType,
                       (uint16_t)PLDM_STATE_SET_SW_TERMINATION_STATUS);

         auto ResponseMsg = bus.call(method);

         ResponseMsg.read(Response);

         if (Response.size() == 0)
         {
             std::cerr
                 << "No sensor PDR has been found that matches the criteria"
                 << "\n";
             return PLDM_ERROR;
         }

         pldm_state_sensor_pdr* pdr;
         for (auto& rep : Response)
         {
             pdr = reinterpret_cast<pldm_state_sensor_pdr*>(rep.data());
             if (!pdr)
             {
                 std::cerr << "Failed to get state sensor PDR.\n";
                 return PLDM_ERROR;
             }
         }

         sensorID = pdr->sensor_id;

         auto compositeSensorCount = pdr->composite_sensor_count;
         auto possibleStatesStart = pdr->possible_states;

         for (auto offset = 0; offset < compositeSensorCount; offset++)
         {
             auto possibleStates =
                 reinterpret_cast<state_sensor_possible_states*>(
                     possibleStatesStart);
             auto setId = possibleStates->state_set_id;
             auto possibleStateSize = possibleStates->possible_states_size;

             if (setId == PLDM_STATE_SET_SW_TERMINATION_STATUS)
             {
                 sensorOffset = offset;
                 break;
             }
             possibleStatesStart +=
                 possibleStateSize + sizeof(setId) + sizeof(possibleStateSize);
         }
     }
     catch (const sdbusplus::exception_t& e)
     {
         std::cerr << "PLDM soft off: Error get State Sensor PDR,ERROR="
                   << e.what() << "\n";
         return PLDM_ERROR;
     }

     return PLDM_SUCCESS;
 }

 int SoftPowerOff::hostSoftOff(sdeventplus::Event& event)
 {
     constexpr uint8_t effecterCount = 1;
     uint8_t mctpEID;
     uint8_t instanceID;

     mctpEID = pldm::utils::readHostEID();

     // Get instanceID
     try
     {
         auto& bus = pldm::utils::DBusHandler::getBus();
         auto method = bus.new_method_call(
             "xyz.openbmc_project.PLDM", "/xyz/openbmc_project/pldm",
             "xyz.openbmc_project.PLDM.Requester", "GetInstanceId");
         method.append(mctpEID);

         auto ResponseMsg = bus.call(method);

         ResponseMsg.read(instanceID);
     }
     catch (const sdbusplus::exception_t& e)
     {
         std::cerr << "PLDM soft off: Error get instanceID,ERROR=" << e.what()
                   << "\n";
         return PLDM_ERROR;
     }

     std::array<uint8_t, sizeof(pldm_msg_hdr) + sizeof(effecterID) +
                             sizeof(effecterCount) +
                             sizeof(set_effecter_state_field)>
         requestMsg{};
     auto request = reinterpret_cast<pldm_msg*>(requestMsg.data());
     set_effecter_state_field stateField{
         PLDM_REQUEST_SET, PLDM_SW_TERM_GRACEFUL_SHUTDOWN_REQUESTED};
     auto rc = encode_set_state_effecter_states_req(
         instanceID, effecterID, effecterCount, &stateField, request);
     if (rc != PLDM_SUCCESS)
     {
         std::cerr << "Message encode failure. PLDM error code = " << std::hex
                   << std::showbase << rc << "\n";
         return PLDM_ERROR;
     }

     // Open connection to MCTP socket
     int fd = pldm_open();
     if (-1 == fd)
     {
         std::cerr << "Failed to connect to mctp demux daemon"
                   << "\n";
         return PLDM_ERROR;
     }

     // Add a timer to the event loop, default 30s.
     auto timerCallback = [=, this](Timer& /*source*/,
                                    Timer::TimePoint /*time*/) {
         if (!responseReceived)
         {
             std::cerr
                 << "PLDM soft off: ERROR! Can't get the response for the PLDM request msg. Time out!\n"
                 << "Exit the pldm-softpoweroff\n";
             exit(-1);
         }
         return;
     };
     Timer time(event, (Clock(event).now() + std::chrono::seconds{30}),
                std::chrono::seconds{1}, std::move(timerCallback));

     // Add a callback to handle EPOLLIN on fd
     auto callback = [=, this](IO& io, int fd, uint32_t revents) {
         if (!(revents & EPOLLIN))
         {
             return;
         }

         uint8_t* responseMsg = nullptr;
         size_t responseMsgSize{};

         auto rc = pldm_recv(mctpEID, fd, request->hdr.instance_id, &responseMsg,
                             &responseMsgSize);
         if (rc)
         {
             std::cerr << "Soft off: failed to recv pldm data. PLDM RC = " << rc
                       << "\n";
             return;
         }

         std::unique_ptr<uint8_t, decltype(std::free)*> responseMsgPtr{
             responseMsg, std::free};

         // We've got the response meant for the PLDM request msg that was
         // sent out
         io.set_enabled(Enabled::Off);
         auto response = reinterpret_cast<pldm_msg*>(responseMsgPtr.get());
         if (response->payload[0] != PLDM_SUCCESS)
         {
             std::cerr << "Getting the wrong response. PLDM RC = "
                       << (unsigned)response->payload[0] << "\n";
             exit(-1);
         }

         responseReceived = true;

         // Start Timer
         using namespace std::chrono;
         auto timeMicroseconds =
             duration_cast<microseconds>(seconds(SOFTOFF_TIMEOUT_SECONDS));

         auto ret = startTimer(timeMicroseconds);
         if (ret < 0)
         {
             std::cerr << "Failure to start Host soft off wait timer, ERRNO = "
                       << ret << "Exit the pldm-softpoweroff\n";
             exit(-1);
         }
         else
         {
             std::cerr
                 << "Timer started waiting for host soft off, TIMEOUT_IN_SEC = "
                 << SOFTOFF_TIMEOUT_SECONDS << "\n";
         }
         return;
     };
     IO io(event, fd, EPOLLIN, std::move(callback));

     // Send PLDM Request message - pldm_send doesn't wait for response
     rc = pldm_send(mctpEID, fd, requestMsg.data(), requestMsg.size());
     if (0 > rc)
     {
         std::cerr << "Failed to send message/receive response. RC = " << rc
                   << ", errno = " << errno << "\n";
         return PLDM_ERROR;
     }

     // Time out or soft off complete
     while (!isCompleted() && !isTimerExpired())
     {
         try
         {
             event.run(std::nullopt);
         }
         catch (const sdeventplus::SdEventError& e)
         {
             std::cerr
                 << "PLDM host soft off: Failure in processing request.ERROR= "
                 << e.what() << "\n";
             return PLDM_ERROR;
         }
     }

     return PLDM_SUCCESS;
 }

 int SoftPowerOff::startTimer(const std::chrono::microseconds& usec)
 {
     return timer.start(usec);
 }
 } // namespace pldm
	#include "config.h"

	#include "softoff.hpp"

	#include "common/utils.hpp"

	#include <libpldm/entity.h>
	#include <libpldm/platform.h>
	#include <libpldm/pldm.h>
	#include <libpldm/state_set.h>

	#include <sdbusplus/bus.hpp>
	#include <sdeventplus/clock.hpp>
	#include <sdeventplus/exception.hpp>
	#include <sdeventplus/source/io.hpp>
	#include <sdeventplus/source/time.hpp>

	#include <array>
	#include <iostream>

	namespace pldm
	{

	using namespace sdeventplus;
	using namespace sdeventplus::source;
	constexpr auto clockId = sdeventplus::ClockId::RealTime;
	using Clock = Clock<clockId>;
	using Timer = Time<clockId>;

	constexpr pldm::pdr::TerminusID TID = 0; // TID will be implemented later.
	namespace sdbusRule = sdbusplus::bus::match::rules;

	SoftPowerOff::SoftPowerOff(sdbusplus::bus_t& bus, sd_event* event) :
	bus(bus), timer(event)
	{
	getHostState();
	if (hasError \|\| completed)
	{
	return;
	}

	auto rc = getEffecterID();
	if (completed)
	{
	std::cerr
	<< "pldm-softpoweroff: effecter to initiate softoff not found \n";
	return;
	}
	else if (rc != PLDM_SUCCESS)
	{
	hasError = true;
	return;
	}

	rc = getSensorInfo();
	if (rc != PLDM_SUCCESS)
	{
	std::cerr << "Message get Sensor PDRs error. PLDM error code = "
	<< std::hex << std::showbase << rc << "\n";
	hasError = true;
	return;
	}

	// Matches on the pldm StateSensorEvent signal
	pldmEventSignal = std::make_unique<sdbusplus::bus::match_t>(
	bus,
	sdbusRule::type::signal() + sdbusRule::member("StateSensorEvent") +
	sdbusRule::path("/xyz/openbmc_project/pldm") +
	sdbusRule::interface("xyz.openbmc_project.PLDM.Event"),
	std::bind(std::mem_fn(&SoftPowerOff::hostSoftOffComplete), this,
	std::placeholders::_1));
	}

	int SoftPowerOff::getHostState()
	{
	try
	{
	pldm::utils::PropertyValue propertyValue =
	pldm::utils::DBusHandler().getDbusPropertyVariant(
	"/xyz/openbmc_project/state/host0", "CurrentHostState",
	"xyz.openbmc_project.State.Host");

	if ((std::get<std::string>(propertyValue) !=
	"xyz.openbmc_project.State.Host.HostState.Running") &&
	(std::get<std::string>(propertyValue) !=
	"xyz.openbmc_project.State.Host.HostState.TransitioningToOff"))
	{
	// Host state is not "Running", this app should return success
	completed = true;
	return PLDM_SUCCESS;
	}
	}
	catch (const std::exception& e)
	{
	std::cerr << "PLDM host soft off: Can't get current host state.\n";
	hasError = true;
	return PLDM_ERROR;
	}

	return PLDM_SUCCESS;
	}

	void SoftPowerOff::hostSoftOffComplete(sdbusplus::message_t& msg)
	{
	pldm::pdr::TerminusID msgTID;
	pldm::pdr::SensorID msgSensorID;
	pldm::pdr::SensorOffset msgSensorOffset;
	pldm::pdr::EventState msgEventState;
	pldm::pdr::EventState msgPreviousEventState;

	// Read the msg and populate each variable
	msg.read(msgTID, msgSensorID, msgSensorOffset, msgEventState,
	msgPreviousEventState);

	if (msgSensorID == sensorID && msgSensorOffset == sensorOffset &&
	msgEventState == PLDM_SW_TERM_GRACEFUL_SHUTDOWN)
	{
	// Receive Graceful shutdown completion event message. Disable the timer
	auto rc = timer.stop();
	if (rc < 0)
	{
	std::cerr << "PLDM soft off: Failure to STOP the timer. ERRNO="
	<< rc << "\n";
	}

	// This marks the completion of pldm soft power off.
	completed = true;
	}
	}

	int SoftPowerOff::getEffecterID()
	{
	auto& bus = pldm::utils::DBusHandler::getBus();

	// VMM is a logical entity, so the bit 15 in entity type is set.
	pdr::EntityType entityType = PLDM_ENTITY_VIRTUAL_MACHINE_MANAGER \| 0x8000;

	try
	{
	std::vector<std::vector<uint8_t>> VMMResponse{};
	auto VMMMethod = bus.new_method_call(
	"xyz.openbmc_project.PLDM", "/xyz/openbmc_project/pldm",
	"xyz.openbmc_project.PLDM.PDR", "FindStateEffecterPDR");
	VMMMethod.append(TID, entityType,
	(uint16_t)PLDM_STATE_SET_SW_TERMINATION_STATUS);

	auto VMMResponseMsg = bus.call(VMMMethod);

	VMMResponseMsg.read(VMMResponse);
	if (VMMResponse.size() != 0)
	{
	for (auto& rep : VMMResponse)
	{
	auto VMMPdr =
	reinterpret_cast<pldm_state_effecter_pdr*>(rep.data());
	effecterID = VMMPdr->effecter_id;
	}
	}
	else
	{
	VMMPdrExist = false;
	}
	}
	catch (const sdbusplus::exception_t& e)
	{
	std::cerr << "PLDM soft off: Error get VMM PDR,ERROR=" << e.what()
	<< "\n";
	VMMPdrExist = false;
	}

	if (VMMPdrExist)
	{
	return PLDM_SUCCESS;
	}

	// If the Virtual Machine Manager PDRs doesn't exist, go find the System
	// Firmware PDRs.
	// System Firmware is a logical entity, so the bit 15 in entity type is set
	entityType = PLDM_ENTITY_SYS_FIRMWARE \| 0x8000;
	try
	{
	std::vector<std::vector<uint8_t>> sysFwResponse{};
	auto sysFwMethod = bus.new_method_call(
	"xyz.openbmc_project.PLDM", "/xyz/openbmc_project/pldm",
	"xyz.openbmc_project.PLDM.PDR", "FindStateEffecterPDR");
	sysFwMethod.append(TID, entityType,
	(uint16_t)PLDM_STATE_SET_SW_TERMINATION_STATUS);

	auto sysFwResponseMsg = bus.call(sysFwMethod);

	sysFwResponseMsg.read(sysFwResponse);

	if (sysFwResponse.size() == 0)
	{
	std::cerr
	<< "No effecter ID has been found that matches the criteria"
	<< "\n";
	return PLDM_ERROR;
	}

	for (auto& rep : sysFwResponse)
	{
	auto sysFwPdr =
	reinterpret_cast<pldm_state_effecter_pdr*>(rep.data());
	effecterID = sysFwPdr->effecter_id;
	}
	}
	catch (const sdbusplus::exception_t& e)
	{
	std::cerr << "PLDM soft off: Error get system firmware PDR,ERROR="
	<< e.what() << "\n";
	completed = true;
	return PLDM_ERROR;
	}

	return PLDM_SUCCESS;
	}

	int SoftPowerOff::getSensorInfo()
	{
	pldm::pdr::EntityType entityType;

	entityType = VMMPdrExist ? PLDM_ENTITY_VIRTUAL_MACHINE_MANAGER
	: PLDM_ENTITY_SYS_FIRMWARE;

	// The Virtual machine manager/System firmware is logical entity, so bit 15
	// need to be set.
	entityType = entityType \| 0x8000;

	try
	{
	auto& bus = pldm::utils::DBusHandler::getBus();
	std::vector<std::vector<uint8_t>> Response{};
	auto method = bus.new_method_call(
	"xyz.openbmc_project.PLDM", "/xyz/openbmc_project/pldm",
	"xyz.openbmc_project.PLDM.PDR", "FindStateSensorPDR");
	method.append(TID, entityType,
	(uint16_t)PLDM_STATE_SET_SW_TERMINATION_STATUS);

	auto ResponseMsg = bus.call(method);

	ResponseMsg.read(Response);

	if (Response.size() == 0)
	{
	std::cerr
	<< "No sensor PDR has been found that matches the criteria"
	<< "\n";
	return PLDM_ERROR;
	}

	pldm_state_sensor_pdr* pdr;
	for (auto& rep : Response)
	{
	pdr = reinterpret_cast<pldm_state_sensor_pdr*>(rep.data());
	if (!pdr)
	{
	std::cerr << "Failed to get state sensor PDR.\n";
	return PLDM_ERROR;
	}
	}

	sensorID = pdr->sensor_id;

	auto compositeSensorCount = pdr->composite_sensor_count;
	auto possibleStatesStart = pdr->possible_states;

	for (auto offset = 0; offset < compositeSensorCount; offset++)
	{
	auto possibleStates =
	reinterpret_cast<state_sensor_possible_states*>(
	possibleStatesStart);
	auto setId = possibleStates->state_set_id;
	auto possibleStateSize = possibleStates->possible_states_size;

	if (setId == PLDM_STATE_SET_SW_TERMINATION_STATUS)
	{
	sensorOffset = offset;
	break;
	}
	possibleStatesStart +=
	possibleStateSize + sizeof(setId) + sizeof(possibleStateSize);
	}
	}
	catch (const sdbusplus::exception_t& e)
	{
	std::cerr << "PLDM soft off: Error get State Sensor PDR,ERROR="
	<< e.what() << "\n";
	return PLDM_ERROR;
	}

	return PLDM_SUCCESS;
	}

	int SoftPowerOff::hostSoftOff(sdeventplus::Event& event)
	{
	constexpr uint8_t effecterCount = 1;
	uint8_t mctpEID;
	uint8_t instanceID;

	mctpEID = pldm::utils::readHostEID();

	// Get instanceID
	try
	{
	auto& bus = pldm::utils::DBusHandler::getBus();
	auto method = bus.new_method_call(
	"xyz.openbmc_project.PLDM", "/xyz/openbmc_project/pldm",
	"xyz.openbmc_project.PLDM.Requester", "GetInstanceId");
	method.append(mctpEID);

	auto ResponseMsg = bus.call(method);

	ResponseMsg.read(instanceID);
	}
	catch (const sdbusplus::exception_t& e)
	{
	std::cerr << "PLDM soft off: Error get instanceID,ERROR=" << e.what()
	<< "\n";
	return PLDM_ERROR;
	}

	std::array<uint8_t, sizeof(pldm_msg_hdr) + sizeof(effecterID) +
	sizeof(effecterCount) +
	sizeof(set_effecter_state_field)>
	requestMsg{};
	auto request = reinterpret_cast<pldm_msg*>(requestMsg.data());
	set_effecter_state_field stateField{
	PLDM_REQUEST_SET, PLDM_SW_TERM_GRACEFUL_SHUTDOWN_REQUESTED};
	auto rc = encode_set_state_effecter_states_req(
	instanceID, effecterID, effecterCount, &stateField, request);
	if (rc != PLDM_SUCCESS)
	{
	std::cerr << "Message encode failure. PLDM error code = " << std::hex
	<< std::showbase << rc << "\n";
	return PLDM_ERROR;
	}

	// Open connection to MCTP socket
	int fd = pldm_open();
	if (-1 == fd)
	{
	std::cerr << "Failed to connect to mctp demux daemon"
	<< "\n";
	return PLDM_ERROR;
	}

	// Add a timer to the event loop, default 30s.
	auto timerCallback = [=, this](Timer& /source/,
	Timer::TimePoint /time/) {
	if (!responseReceived)
	{
	std::cerr
	<< "PLDM soft off: ERROR! Can't get the response for the PLDM request msg. Time out!\n"
	<< "Exit the pldm-softpoweroff\n";
	exit(-1);
	}
	return;
	};
	Timer time(event, (Clock(event).now() + std::chrono::seconds{30}),
	std::chrono::seconds{1}, std::move(timerCallback));

	// Add a callback to handle EPOLLIN on fd
	auto callback = [=, this](IO& io, int fd, uint32_t revents) {
	if (!(revents & EPOLLIN))
	{
	return;
	}

	uint8_t* responseMsg = nullptr;
	size_t responseMsgSize{};

	auto rc = pldm_recv(mctpEID, fd, request->hdr.instance_id, &responseMsg,
	&responseMsgSize);
	if (rc)
	{
	std::cerr << "Soft off: failed to recv pldm data. PLDM RC = " << rc
	<< "\n";
	return;
	}

	std::unique_ptr<uint8_t, decltype(std::free)*> responseMsgPtr{
	responseMsg, std::free};

	// We've got the response meant for the PLDM request msg that was
	// sent out
	io.set_enabled(Enabled::Off);
	auto response = reinterpret_cast<pldm_msg*>(responseMsgPtr.get());
	if (response->payload[0] != PLDM_SUCCESS)
	{
	std::cerr << "Getting the wrong response. PLDM RC = "
	<< (unsigned)response->payload[0] << "\n";
	exit(-1);
	}

	responseReceived = true;

	// Start Timer
	using namespace std::chrono;
	auto timeMicroseconds =
	duration_cast<microseconds>(seconds(SOFTOFF_TIMEOUT_SECONDS));

	auto ret = startTimer(timeMicroseconds);
	if (ret < 0)
	{
	std::cerr << "Failure to start Host soft off wait timer, ERRNO = "
	<< ret << "Exit the pldm-softpoweroff\n";
	exit(-1);
	}
	else
	{
	std::cerr
	<< "Timer started waiting for host soft off, TIMEOUT_IN_SEC = "
	<< SOFTOFF_TIMEOUT_SECONDS << "\n";
	}
	return;
	};
	IO io(event, fd, EPOLLIN, std::move(callback));

	// Send PLDM Request message - pldm_send doesn't wait for response
	rc = pldm_send(mctpEID, fd, requestMsg.data(), requestMsg.size());
	if (0 > rc)
	{
	std::cerr << "Failed to send message/receive response. RC = " << rc
	<< ", errno = " << errno << "\n";
	return PLDM_ERROR;
	}

	// Time out or soft off complete
	while (!isCompleted() && !isTimerExpired())
	{
	try
	{
	event.run(std::nullopt);
	}
	catch (const sdeventplus::SdEventError& e)
	{
	std::cerr
	<< "PLDM host soft off: Failure in processing request.ERROR= "
	<< e.what() << "\n";
	return PLDM_ERROR;
	}
	}

	return PLDM_SUCCESS;
	}

	int SoftPowerOff::startTimer(const std::chrono::microseconds& usec)
	{
	return timer.start(usec);
	}
	} // namespace pldm