| #ifndef FILEIO_H |
| #define FILEIO_H |
| |
| #ifdef __cplusplus |
| extern "C" { |
| #endif |
| |
| #include <stddef.h> |
| #include <stdint.h> |
| |
| #include "base.h" |
| |
| /** @brief PLDM Commands in IBM OEM type |
| */ |
| enum pldm_fileio_commands { |
| PLDM_GET_FILE_TABLE = 0x1, |
| PLDM_READ_FILE = 0x4, |
| PLDM_WRITE_FILE = 0x5, |
| PLDM_READ_FILE_INTO_MEMORY = 0x6, |
| PLDM_WRITE_FILE_FROM_MEMORY = 0x7, |
| PLDM_READ_FILE_BY_TYPE_INTO_MEMORY = 0x8, |
| PLDM_WRITE_FILE_BY_TYPE_FROM_MEMORY = 0x9, |
| PLDM_NEW_FILE_AVAILABLE = 0xA, |
| PLDM_READ_FILE_BY_TYPE = 0xB, |
| PLDM_WRITE_FILE_BY_TYPE = 0xC, |
| PLDM_FILE_ACK = 0xD, |
| }; |
| |
| /** @brief PLDM Command specific codes |
| */ |
| enum pldm_fileio_completion_codes { |
| PLDM_FILE_TABLE_UNAVAILABLE = 0x83, |
| PLDM_INVALID_FILE_TABLE_TYPE = 0x85, |
| PLDM_INVALID_FILE_HANDLE = 0x86, |
| PLDM_DATA_OUT_OF_RANGE = 0x87, |
| PLDM_INVALID_FILE_TYPE = 0x89, |
| }; |
| |
| /** @brief PLDM File I/O table types |
| */ |
| enum pldm_fileio_table_type { |
| PLDM_FILE_ATTRIBUTE_TABLE = 0, |
| PLDM_OEM_FILE_ATTRIBUTE_TABLE = 1, |
| }; |
| |
| /** @brief PLDM File I/O table types |
| */ |
| enum pldm_fileio_file_type { |
| PLDM_FILE_TYPE_PEL = 0, |
| PLDM_FILE_TYPE_LID_PERM = 1, |
| PLDM_FILE_TYPE_LID_TEMP = 2, |
| PLDM_FILE_TYPE_DUMP = 3, |
| PLDM_FILE_TYPE_CERT_SIGNING_REQUEST = 4, |
| PLDM_FILE_TYPE_SIGNED_CERT = 5, |
| PLDM_FILE_TYPE_ROOT_CERT = 6, |
| PLDM_FILE_TYPE_LID_MARKER = 7, |
| }; |
| |
| #define PLDM_RW_FILE_MEM_REQ_BYTES 20 |
| #define PLDM_RW_FILE_MEM_RESP_BYTES 5 |
| #define PLDM_GET_FILE_TABLE_REQ_BYTES 6 |
| #define PLDM_GET_FILE_TABLE_MIN_RESP_BYTES 6 |
| #define PLDM_READ_FILE_REQ_BYTES 12 |
| #define PLDM_READ_FILE_RESP_BYTES 5 |
| #define PLDM_WRITE_FILE_REQ_BYTES 12 |
| #define PLDM_WRITE_FILE_RESP_BYTES 5 |
| #define PLDM_RW_FILE_BY_TYPE_MEM_REQ_BYTES 22 |
| #define PLDM_RW_FILE_BY_TYPE_MEM_RESP_BYTES 5 |
| #define PLDM_NEW_FILE_REQ_BYTES 14 |
| #define PLDM_NEW_FILE_RESP_BYTES 1 |
| #define PLDM_RW_FILE_BY_TYPE_REQ_BYTES 14 |
| #define PLDM_RW_FILE_BY_TYPE_RESP_BYTES 5 |
| #define PLDM_FILE_ACK_REQ_BYTES 7 |
| #define PLDM_FILE_ACK_RESP_BYTES 1 |
| |
| /** @struct pldm_read_write_file_memory_req |
| * |
| * Structure representing ReadFileIntoMemory request and WriteFileFromMemory |
| * request |
| */ |
| struct pldm_read_write_file_memory_req { |
| uint32_t file_handle; //!< A Handle to the file |
| uint32_t offset; //!< Offset to the file |
| uint32_t length; //!< Number of bytes to be read/write |
| uint64_t address; //!< Memory address of the file |
| } __attribute__((packed)); |
| |
| /** @struct pldm_read_write_file_memory_resp |
| * |
| * Structure representing ReadFileIntoMemory response and WriteFileFromMemory |
| * response |
| */ |
| struct pldm_read_write_file_memory_resp { |
| uint8_t completion_code; //!< completion code |
| uint32_t length; //!< Number of bytes read/written |
| } __attribute__((packed)); |
| |
| /** @brief Decode ReadFileIntoMemory and WriteFileFromMemory commands request |
| * data |
| * |
| * @param[in] msg - Pointer to PLDM request message |
| * @param[in] payload_length - Length of request payload |
| * @param[out] file_handle - A handle to the file |
| * @param[out] offset - Offset to the file at which the read should begin |
| * @param[out] length - Number of bytes to be read |
| * @param[out] address - Memory address where the file content has to be |
| * written to |
| * @return pldm_completion_codes |
| */ |
| int decode_rw_file_memory_req(const struct pldm_msg *msg, size_t payload_length, |
| uint32_t *file_handle, uint32_t *offset, |
| uint32_t *length, uint64_t *address); |
| |
| /** @brief Create a PLDM response for ReadFileIntoMemory and |
| * WriteFileFromMemory |
| * |
| * @param[in] instance_id - Message's instance id |
| * @param[in] command - PLDM command |
| * @param[in] completion_code - PLDM completion code |
| * @param[in] length - Number of bytes read. This could be less than what the |
| requester asked for. |
| * @param[in,out] msg - Message will be written to this |
| * @return pldm_completion_codes |
| * @note Caller is responsible for memory alloc and dealloc of param 'msg' |
| */ |
| int encode_rw_file_memory_resp(uint8_t instance_id, uint8_t command, |
| uint8_t completion_code, uint32_t length, |
| struct pldm_msg *msg); |
| |
| /** @brief Encode ReadFileIntoMemory and WriteFileFromMemory |
| * commands request data |
| * |
| * @param[in] instance_id - Message's instance id |
| * @param[in] command - PLDM command |
| * @param[in] file_handle - A handle to the file |
| * @param[in] offset - Offset to the file at which the read should begin |
| * @param[in] length - Number of bytes to be read/written |
| * @param[in] address - Memory address where the file content has to be |
| * written to |
| * @param[out] msg - Message will be written to this |
| * @return pldm_completion_codes |
| */ |
| int encode_rw_file_memory_req(uint8_t instance_id, uint8_t command, |
| uint32_t file_handle, uint32_t offset, |
| uint32_t length, uint64_t address, |
| struct pldm_msg *msg); |
| |
| /** @brief Decode ReadFileIntoMemory and WriteFileFromMemory |
| * commands response data |
| * |
| * @param[in] msg - pointer to PLDM response message |
| * @param[in] payload_length - Length of response payload |
| * @param[out] completion_code - PLDM completion code |
| * @param[out] length - Number of bytes to be read/written |
| * @return pldm_completion_codes |
| */ |
| int decode_rw_file_memory_resp(const struct pldm_msg *msg, |
| size_t payload_length, uint8_t *completion_code, |
| uint32_t *length); |
| |
| /** @struct pldm_get_file_table_req |
| * |
| * Structure representing GetFileTable request |
| */ |
| struct pldm_get_file_table_req { |
| uint32_t transfer_handle; //!< Data transfer handle |
| uint8_t operation_flag; //!< Transfer operation flag |
| uint8_t table_type; //!< Table type |
| } __attribute__((packed)); |
| |
| /** @struct pldm_get_file_table_resp |
| * |
| * Structure representing GetFileTable response fixed data |
| */ |
| struct pldm_get_file_table_resp { |
| uint8_t completion_code; //!< Completion code |
| uint32_t next_transfer_handle; //!< Next data transfer handle |
| uint8_t transfer_flag; //!< Transfer flag |
| uint8_t table_data[1]; //!< Table Data |
| } __attribute__((packed)); |
| |
| /** @struct pldm_file_attr_table_entry |
| * |
| * Structure representing File attribute table entry |
| */ |
| struct pldm_file_attr_table_entry { |
| uint32_t file_handle; //!< File Handle |
| uint16_t file_name_length; //!< File name length |
| uint8_t file_attr_table_nst[1]; //!< File name size traits |
| } __attribute__((packed)); |
| |
| /** @brief Decode GetFileTable command request data |
| * |
| * @param[in] msg - Pointer to PLDM request message |
| * @param[in] payload_length - Length of request payload |
| * @param[out] trasnfer_handle - the handle of data |
| * @param[out] transfer_opflag - Transfer operation flag |
| * @param[out] table_type - the type of file table |
| * @return pldm_completion_codes |
| */ |
| int decode_get_file_table_req(const struct pldm_msg *msg, size_t payload_length, |
| uint32_t *transfer_handle, |
| uint8_t *transfer_opflag, uint8_t *table_type); |
| |
| /** @brief Create a PLDM response for GetFileTable command |
| * |
| * @param[in] instance_id - Message's instance id |
| * @param[in] completion_code - PLDM completion code |
| * @param[in] next_transfer_handle - Handle to identify next portion of |
| * data transfer |
| * @param[in] transfer_flag - Represents the part of transfer |
| * @param[in] table_data - pointer to file table data |
| * @param[in] table_size - file table size |
| * @param[in,out] msg - Message will be written to this |
| * @return pldm_completion_codes |
| * @note Caller is responsible for memory alloc and dealloc of param 'msg' |
| */ |
| int encode_get_file_table_resp(uint8_t instance_id, uint8_t completion_code, |
| uint32_t next_transfer_handle, |
| uint8_t transfer_flag, const uint8_t *table_data, |
| size_t table_size, struct pldm_msg *msg); |
| |
| /** @brief Encode GetFileTable command request data |
| * |
| * @param[in] instance_id - Message's instance id |
| * @param[in] transfer_handle - the handle of data |
| * @param[in] transfer_opflag - Transfer operation flag |
| * @param[in] table_type - the type of file table |
| * @param[out] msg - Message will be written to this |
| * @return pldm_completion_codes |
| */ |
| int encode_get_file_table_req(uint8_t instance_id, uint32_t transfer_handle, |
| uint8_t transfer_opflag, uint8_t table_type, |
| struct pldm_msg *msg); |
| |
| /** @brief Decode GetFileTable command response data |
| * @param[in] msg - Response message |
| * @param[in] payload_length - length of response message payload |
| * @param[out] completion_code - PLDM completion code |
| * @param[out] next_transfer_handle - Handle to identify next portion of data |
| * transfer |
| * @param[out] transfer_flag - Represents the part of transfer |
| * @param[out] file_table_data_start_offset - This data is a portion of the |
| * overall File Table |
| * @param[out] file_table_length - Length of the File table data |
| * @return pldm_completion_codes |
| */ |
| int decode_get_file_table_resp(const struct pldm_msg *msg, |
| size_t payload_length, uint8_t *completion_code, |
| uint32_t *next_transfer_handle, |
| uint8_t *transfer_flag, |
| uint8_t *file_table_data_start_offset, |
| size_t *file_table_length); |
| |
| /** @struct pldm_read_file_req |
| * |
| * Structure representing ReadFile request |
| */ |
| struct pldm_read_file_req { |
| uint32_t file_handle; //!< Handle to file |
| uint32_t offset; //!< Offset to file where read starts |
| uint32_t length; //!< Bytes to be read |
| } __attribute__((packed)); |
| |
| /** @struct pldm_read_file_resp |
| * |
| * Structure representing ReadFile response data |
| */ |
| struct pldm_read_file_resp { |
| uint8_t completion_code; //!< Completion code |
| uint32_t length; //!< Number of bytes read |
| uint8_t file_data[1]; //!< Address of this is where file data starts |
| } __attribute__((packed)); |
| |
| /** @struct pldm_write_file_req |
| * |
| * Structure representing WriteFile request |
| */ |
| struct pldm_write_file_req { |
| uint32_t file_handle; //!< Handle to file |
| uint32_t offset; //!< Offset to file where write starts |
| uint32_t length; //!< Bytes to be written |
| uint8_t file_data[1]; //!< Address of this is where file data starts |
| } __attribute__((packed)); |
| |
| /** @struct pldm_write_file_resp |
| * |
| * Structure representing WriteFile response data |
| */ |
| struct pldm_write_file_resp { |
| uint8_t completion_code; //!< Completion code |
| uint32_t length; //!< Bytes written |
| } __attribute__((packed)); |
| |
| /** @brief Decode Read File commands request |
| * |
| * @param[in] msg - PLDM request message payload |
| * @param[in] payload_length - Length of request payload |
| * @param[out] file_handle - A handle to the file |
| * @param[out] offset - Offset to the file at which the read should begin |
| * @param[out] length - Number of bytes read |
| * @return pldm_completion_codes |
| */ |
| int decode_read_file_req(const struct pldm_msg *msg, size_t payload_length, |
| uint32_t *file_handle, uint32_t *offset, |
| uint32_t *length); |
| |
| /** @brief Encode Read File commands request |
| * |
| * @param[in] instance_id - Message's instance id |
| * @param[in] file_handle - A handle to the file |
| * @param[in] offset - Offset to the file at which the read should begin |
| * @param[in] length - Number of bytes read |
| * @param[in,out] msg - Message will be written to this |
| * @return pldm_completion_codes |
| * @note Caller is responsible for memory alloc and dealloc of param 'msg' |
| */ |
| int encode_read_file_req(uint8_t instance_id, uint32_t file_handle, |
| uint32_t offset, uint32_t length, |
| struct pldm_msg *msg); |
| |
| /** @brief Decode Read File commands response |
| * |
| * @param[in] msg - PLDM response message payload |
| * @param[in] payload_length - Length of request payload |
| * @param[out] completion_code - PLDM completion code |
| * @param[out] length - Number of bytes read. This could be less than what the |
| * requester asked for. |
| * @param[out] file_data_offset - Offset where file data should be read in pldm |
| * msg. |
| * @return pldm_completion_codes |
| */ |
| int decode_read_file_resp(const struct pldm_msg *msg, size_t payload_length, |
| uint8_t *completion_code, uint32_t *length, |
| size_t *file_data_offset); |
| |
| /** @brief Create a PLDM response for Read File |
| * |
| * @param[in] instance_id - Message's instance id |
| * @param[in] completion_code - PLDM completion code |
| * @param[in] length - Number of bytes read. This could be less than what the |
| * requester asked for. |
| * @param[in,out] msg - Message will be written to this |
| * @return pldm_completion_codes |
| * @note Caller is responsible for memory alloc and dealloc of param 'msg'. |
| * Although read file command response includes file data, this function |
| * does not encode the file data to prevent additional copying of the data. |
| * The position of file data is calculated by caller from address and size |
| * of other input arguments. |
| */ |
| int encode_read_file_resp(uint8_t instance_id, uint8_t completion_code, |
| uint32_t length, struct pldm_msg *msg); |
| |
| /** @brief Decode Write File commands request |
| * |
| * @param[in] msg - PLDM request message payload |
| * @param[in] payload_length - Length of request payload |
| * @param[out] file_handle - A handle to the file |
| * @param[out] offset - Offset to the file at which the write should begin |
| * @param[out] length - Number of bytes to write |
| * @param[out] file_data_offset - Offset where file data write begins in pldm |
| * msg. |
| * @return pldm_completion_codes |
| */ |
| int decode_write_file_req(const struct pldm_msg *msg, size_t payload_length, |
| uint32_t *file_handle, uint32_t *offset, |
| uint32_t *length, size_t *file_data_offset); |
| |
| /** @brief Create a PLDM request for Write File |
| * |
| * @param[in] instance_id - Message's instance id |
| * @param[in] file_handle - A handle to the file |
| * @param[in] offset - Offset to the file at which the read should begin |
| * @param[in] length - Number of bytes written. This could be less than what |
| * the requester asked for. |
| * @param[in,out] msg - Message will be written to this |
| * @return pldm_completion_codes |
| * @note Caller is responsible for memory alloc and dealloc of param 'msg'. |
| * Although write file command request includes file data, this function |
| * does not encode the file data to prevent additional copying of the data. |
| * The position of file data is calculated by caller from address and size |
| * of other input arguments. |
| */ |
| int encode_write_file_req(uint8_t instance_id, uint32_t file_handle, |
| uint32_t offset, uint32_t length, |
| struct pldm_msg *msg); |
| |
| /** @brief Decode Write File commands response |
| * |
| * @param[in] msg - PLDM request message payload |
| * @param[in] payload_length - Length of request payload |
| * @param[out] completion_code - PLDM completion code |
| * @param[out] length - Number of bytes written |
| * @return pldm_completion_codes |
| */ |
| int decode_write_file_resp(const struct pldm_msg *msg, size_t payload_length, |
| uint8_t *completion_code, uint32_t *length); |
| |
| /** @brief Create a PLDM response for Write File |
| * |
| * @param[in] instance_id - Message's instance id |
| * @param[in] completion_code - PLDM completion code |
| * @param[in] length - Number of bytes written. This could be less than what |
| * the requester asked for. |
| * @param[in,out] msg - Message will be written to this |
| * @return pldm_completion_codes |
| * @note Caller is responsible for memory alloc and dealloc of param 'msg' |
| */ |
| int encode_write_file_resp(uint8_t instance_id, uint8_t completion_code, |
| uint32_t length, struct pldm_msg *msg); |
| |
| /** @struct pldm_read_write_file_by_type_memory_req |
| * |
| * Structure representing ReadFileByTypeIntoMemory and |
| * WriteFileByTypeFromMemory request |
| */ |
| struct pldm_read_write_file_by_type_memory_req { |
| uint16_t file_type; //!< Type of file |
| uint32_t file_handle; //!< Handle to file |
| uint32_t offset; //!< Offset to file where read starts |
| uint32_t length; //!< Bytes to be read |
| uint64_t address; //!< Memory address of the file |
| } __attribute__((packed)); |
| |
| /** @struct pldm_read_write_file_by_type_memory_resp |
| * |
| * Structure representing ReadFileByTypeIntoMemory and |
| * WriteFileByTypeFromMemory response |
| */ |
| struct pldm_read_write_file_by_type_memory_resp { |
| uint8_t completion_code; //!< Completion code |
| uint32_t length; //!< Number of bytes read |
| } __attribute__((packed)); |
| |
| /** @brief Decode ReadFileByTypeIntoMemory and WriteFileByTypeFromMemory |
| * commands request data |
| * |
| * @param[in] msg - Pointer to PLDM request message |
| * @param[in] payload_length - Length of request payload |
| * @param[in] file_type - Type of the file |
| * @param[out] file_handle - A handle to the file |
| * @param[out] offset - Offset to the file at which the read should begin |
| * @param[out] length - Number of bytes to be read |
| * @param[out] address - Memory address of the file content |
| * @return pldm_completion_codes |
| */ |
| int decode_rw_file_by_type_memory_req(const struct pldm_msg *msg, |
| size_t payload_length, |
| uint16_t *file_type, |
| uint32_t *file_handle, uint32_t *offset, |
| uint32_t *length, uint64_t *address); |
| |
| /** @brief Create a PLDM response for ReadFileByTypeIntoMemory and |
| * WriteFileByTypeFromMemory |
| * |
| * @param[in] instance_id - Message's instance id |
| * @param[in] command - PLDM command |
| * @param[in] completion_code - PLDM completion code |
| * @param[in] length - Number of bytes read. This could be less than what the |
| * requester asked for. |
| * @param[in,out] msg - Message will be written to this |
| * @return pldm_completion_codes |
| * @note Caller is responsible for memory alloc and dealloc of param 'msg' |
| */ |
| int encode_rw_file_by_type_memory_resp(uint8_t instance_id, uint8_t command, |
| uint8_t completion_code, uint32_t length, |
| struct pldm_msg *msg); |
| |
| /** @brief Encode ReadFileByTypeIntoMemory and WriteFileByTypeFromMemory |
| * commands request data |
| * |
| * @param[in] instance_id - Message's instance id |
| * @param[in] command - PLDM command |
| * @param[in] file_type - Type of the file |
| * @param[in] file_handle - A handle to the file |
| * @param[in] offset - Offset to the file at which the read should begin |
| * @param[in] length - Number of bytes to be read/written |
| * @param[in] address - Memory address where the file content has to be |
| * written to |
| * @param[out] msg - Message will be written to this |
| * @return pldm_completion_codes |
| */ |
| int encode_rw_file_by_type_memory_req(uint8_t instance_id, uint8_t command, |
| uint16_t file_type, uint32_t file_handle, |
| uint32_t offset, uint32_t length, |
| uint64_t address, struct pldm_msg *msg); |
| |
| /** @brief Decode ReadFileTypeIntoMemory and WriteFileTypeFromMemory |
| * commands response data |
| * |
| * @param[in] msg - pointer to PLDM response message |
| * @param[in] payload_length - Length of response payload |
| * @param[out] completion_code - PLDM completion code |
| * @param[out] length - Number of bytes to be read/written |
| * @return pldm_completion_codes |
| */ |
| int decode_rw_file_by_type_memory_resp(const struct pldm_msg *msg, |
| size_t payload_length, |
| uint8_t *completion_code, |
| uint32_t *length); |
| |
| /** @struct pldm_new_file_req |
| * |
| * Structure representing NewFile request |
| */ |
| struct pldm_new_file_req { |
| uint16_t file_type; //!< Type of file |
| uint32_t file_handle; //!< Handle to file |
| uint64_t length; //!< Number of bytes in new file |
| } __attribute__((packed)); |
| |
| /** @struct pldm_new_file_resp |
| * |
| * Structure representing NewFile response data |
| */ |
| struct pldm_new_file_resp { |
| uint8_t completion_code; //!< Completion code |
| } __attribute__((packed)); |
| |
| /** @brief Decode NewFileAvailable command request data |
| * |
| * @param[in] msg - Pointer to PLDM request message |
| * @param[in] payload_length - Length of request payload |
| * @param[in] file_type - Type of the file |
| * @param[out] file_handle - A handle to the file |
| * @param[out] length - Number of bytes in new file |
| * @return pldm_completion_codes |
| */ |
| int decode_new_file_req(const struct pldm_msg *msg, size_t payload_length, |
| uint16_t *file_type, uint32_t *file_handle, |
| uint64_t *length); |
| |
| /** @brief Create a PLDM response for NewFileAvailable |
| * |
| * @param[in] instance_id - Message's instance id |
| * @param[in] completion_code - PLDM completion code |
| * @param[in,out] msg - Message will be written to this |
| * @return pldm_completion_codes |
| * @note Caller is responsible for memory alloc and dealloc of param 'msg' |
| */ |
| int encode_new_file_resp(uint8_t instance_id, uint8_t completion_code, |
| struct pldm_msg *msg); |
| |
| /** @brief Encode NewFileAvailable command request data |
| * |
| * @param[in] instance_id - Message's instance id |
| * @param[in] file_type - Type of the file |
| * @param[in] file_handle - A handle to the file |
| * @param[in] length - Number of bytes in new file |
| * @param[out] msg - Message will be written to this |
| * @return pldm_completion_codes |
| */ |
| int encode_new_file_req(uint8_t instance_id, uint16_t file_type, |
| uint32_t file_handle, uint64_t length, |
| struct pldm_msg *msg); |
| |
| /** @brief Decode NewFileAvailable command response data |
| * |
| * @param[in] msg - pointer to PLDM response message |
| * @param[in] payload_length - Length of response payload |
| * @param[out] completion_code - PLDM completion code |
| * @return pldm_completion_codes |
| */ |
| int decode_new_file_resp(const struct pldm_msg *msg, size_t payload_length, |
| uint8_t *completion_code); |
| |
| /** @struct pldm_read_write_file_by_type_req |
| * |
| * Structure representing ReadFileByType and |
| * WriteFileByType request |
| */ |
| struct pldm_read_write_file_by_type_req { |
| uint16_t file_type; //!< Type of file |
| uint32_t file_handle; //!< Handle to file |
| uint32_t offset; //!< Offset to file where read/write starts |
| uint32_t length; //!< Bytes to be read |
| } __attribute__((packed)); |
| |
| /** @struct pldm_read_write_file_by_type_resp |
| * |
| * Structure representing ReadFileByType and |
| * WriteFileByType response |
| */ |
| struct pldm_read_write_file_by_type_resp { |
| uint8_t completion_code; //!< Completion code |
| uint32_t length; //!< Number of bytes read |
| } __attribute__((packed)); |
| |
| /** @brief Decode ReadFileByType and WriteFileByType |
| * commands request data |
| * |
| * @param[in] msg - Pointer to PLDM request message |
| * @param[in] payload_length - Length of request payload |
| * @param[out] file_type - Type of the file |
| * @param[out] file_handle - A handle to the file |
| * @param[out] offset - Offset to the file at which the read/write should begin |
| * @param[out] length - Number of bytes to be read/written |
| * @return pldm_completion_codes |
| */ |
| int decode_rw_file_by_type_req(const struct pldm_msg *msg, |
| size_t payload_length, uint16_t *file_type, |
| uint32_t *file_handle, uint32_t *offset, |
| uint32_t *length); |
| |
| /** @brief Create a PLDM response for ReadFileByType and |
| * WriteFileByType |
| * |
| * @param[in] instance_id - Message's instance id |
| * @param[in] command - PLDM command |
| * @param[in] completion_code - PLDM completion code |
| * @param[in] length - Number of bytes read/written. This could be less than |
| * what the requester asked for. |
| * @param[in,out] msg - Message will be written to this |
| * @return pldm_completion_codes |
| * @note Caller is responsible for memory alloc and dealloc of param 'msg' |
| * @note File content has to be copied directly by the caller. |
| */ |
| int encode_rw_file_by_type_resp(uint8_t instance_id, uint8_t command, |
| uint8_t completion_code, uint32_t length, |
| struct pldm_msg *msg); |
| |
| /** @brief Encode ReadFileByType and WriteFileByType |
| * commands request data |
| * |
| * @param[in] instance_id - Message's instance id |
| * @param[in] command - PLDM command |
| * @param[in] file_type - Type of the file |
| * @param[in] file_handle - A handle to the file |
| * @param[in] offset - Offset to the file at which the read should begin |
| * @param[in] length - Number of bytes to be read/written |
| * @param[out] msg - Message will be written to this |
| * @return pldm_completion_codes |
| * @note File content has to be read directly by the caller. |
| */ |
| int encode_rw_file_by_type_req(uint8_t instance_id, uint8_t command, |
| uint16_t file_type, uint32_t file_handle, |
| uint32_t offset, uint32_t length, |
| struct pldm_msg *msg); |
| |
| /** @brief Decode ReadFileByType and WriteFileByType |
| * commands response data |
| * |
| * @param[in] msg - pointer to PLDM response message |
| * @param[in] payload_length - Length of response payload |
| * @param[out] completion_code - PLDM completion code |
| * @param[out] length - Number of bytes to be read/written |
| * @return pldm_completion_codes |
| */ |
| int decode_rw_file_by_type_resp(const struct pldm_msg *msg, |
| size_t payload_length, uint8_t *completion_code, |
| uint32_t *length); |
| |
| /** @struct pldm_file_ack_req |
| * |
| * Structure representing FileAck request |
| */ |
| struct pldm_file_ack_req { |
| uint16_t file_type; //!< Type of file |
| uint32_t file_handle; //!< Handle to file |
| uint8_t file_status; //!< Status of file processing |
| } __attribute__((packed)); |
| |
| /** @struct pldm_file_ack_resp |
| * |
| * Structure representing NewFile response data |
| */ |
| struct pldm_file_ack_resp { |
| uint8_t completion_code; //!< Completion code |
| } __attribute__((packed)); |
| |
| /** @brief Decode FileAck command request data |
| * |
| * @param[in] msg - Pointer to PLDM request message |
| * @param[in] payload_length - Length of request payload |
| * @param[out] file_type - Type of the file |
| * @param[out] file_handle - A handle to the file |
| * @param[out] file_status - Status of file processing |
| * @return pldm_completion_codes |
| */ |
| int decode_file_ack_req(const struct pldm_msg *msg, size_t payload_length, |
| uint16_t *file_type, uint32_t *file_handle, |
| uint8_t *file_status); |
| |
| /** @brief Create a PLDM response for FileAck |
| * |
| * @param[in] instance_id - Message's instance id |
| * @param[in] completion_code - PLDM completion code |
| * @param[in,out] msg - Message will be written to this |
| * @return pldm_completion_codes |
| * @note Caller is responsible for memory alloc and dealloc of param 'msg' |
| */ |
| int encode_file_ack_resp(uint8_t instance_id, uint8_t completion_code, |
| struct pldm_msg *msg); |
| |
| /** @brief Encode FileAck command request data |
| * |
| * @param[in] instance_id - Message's instance id |
| * @param[in] file_type - Type of the file |
| * @param[in] file_handle - A handle to the file |
| * @param[in] file_status - Status of file processing |
| * @param[out] msg - Message will be written to this |
| * @return pldm_completion_codes |
| */ |
| int encode_file_ack_req(uint8_t instance_id, uint16_t file_type, |
| uint32_t file_handle, uint8_t file_status, |
| struct pldm_msg *msg); |
| |
| /** @brief Decode FileAck command response data |
| * |
| * @param[in] msg - pointer to PLDM response message |
| * @param[in] payload_length - Length of response payload |
| * @param[out] completion_code - PLDM completion code |
| * @return pldm_completion_codes |
| */ |
| int decode_file_ack_resp(const struct pldm_msg *msg, size_t payload_length, |
| uint8_t *completion_code); |
| |
| #ifdef __cplusplus |
| } |
| #endif |
| |
| #endif /* FILEIO_H */ |