blob: 2091fca13e7c8e68434f7f9a34dc35cbc164de25 [file] [log] [blame]
#include "config.h"
#include "softoff.hpp"
#include "libpldm/entity.h"
#include "libpldm/platform.h"
#include "libpldm/requester/pldm.h"
#include "libpldm/state_set.h"
#include "common/utils.hpp"
#include <sdbusplus/bus.hpp>
#include <sdeventplus/clock.hpp>
#include <sdeventplus/exception.hpp>
#include <sdeventplus/source/io.hpp>
#include <sdeventplus/source/time.hpp>
#include <array>
#include <iostream>
namespace pldm
{
using namespace sdeventplus;
using namespace sdeventplus::source;
constexpr auto clockId = sdeventplus::ClockId::RealTime;
using Clock = Clock<clockId>;
using Timer = Time<clockId>;
using sdbusplus::exception::SdBusError;
constexpr pldm::pdr::TerminusID TID = 0; // TID will be implemented later.
namespace sdbusRule = sdbusplus::bus::match::rules;
SoftPowerOff::SoftPowerOff(sdbusplus::bus::bus& bus, sd_event* event) :
bus(bus), timer(event)
{
auto rc = getHostState();
if (hasError || completed)
{
return;
}
rc = getEffecterID();
if (completed)
{
std::cerr
<< "pldm-softpoweroff: effecter to initiate softoff not found \n";
return;
}
else if (rc != PLDM_SUCCESS)
{
hasError = true;
return;
}
rc = getSensorInfo();
if (rc != PLDM_SUCCESS)
{
std::cerr << "Message get Sensor PDRs error. PLDM "
"error code = "
<< std::hex << std::showbase << rc << "\n";
hasError = true;
return;
}
// Matches on the pldm StateSensorEvent signal
pldmEventSignal = std::make_unique<sdbusplus::bus::match_t>(
bus,
sdbusRule::type::signal() + sdbusRule::member("StateSensorEvent") +
sdbusRule::path("/xyz/openbmc_project/pldm") +
sdbusRule::interface("xyz.openbmc_project.PLDM.Event"),
std::bind(std::mem_fn(&SoftPowerOff::hostSoftOffComplete), this,
std::placeholders::_1));
}
int SoftPowerOff::getHostState()
{
try
{
pldm::utils::PropertyValue propertyValue =
pldm::utils::DBusHandler().getDbusPropertyVariant(
"/xyz/openbmc_project/state/host0", "CurrentHostState",
"xyz.openbmc_project.State.Host");
if ((std::get<std::string>(propertyValue) !=
"xyz.openbmc_project.State.Host.HostState.Running") &&
(std::get<std::string>(propertyValue) !=
"xyz.openbmc_project.State.Host.HostState.TransitioningToOff"))
{
// Host state is not "Running", this app should return success
completed = true;
return PLDM_SUCCESS;
}
}
catch (const std::exception& e)
{
std::cerr << "PLDM host soft off: Can't get current host state.\n";
hasError = true;
return PLDM_ERROR;
}
return PLDM_SUCCESS;
}
void SoftPowerOff::hostSoftOffComplete(sdbusplus::message::message& msg)
{
pldm::pdr::TerminusID msgTID;
pldm::pdr::SensorID msgSensorID;
pldm::pdr::SensorOffset msgSensorOffset;
pldm::pdr::EventState msgEventState;
pldm::pdr::EventState msgPreviousEventState;
// Read the msg and populate each variable
msg.read(msgTID, msgSensorID, msgSensorOffset, msgEventState,
msgPreviousEventState);
if (msgSensorID == sensorID && msgSensorOffset == sensorOffset &&
msgEventState == PLDM_SW_TERM_GRACEFUL_SHUTDOWN)
{
// Receive Graceful shutdown completion event message. Disable the timer
auto rc = timer.stop();
if (rc < 0)
{
std::cerr << "PLDM soft off: Failure to STOP the timer. ERRNO="
<< rc << "\n";
}
// This marks the completion of pldm soft power off.
completed = true;
}
}
int SoftPowerOff::getEffecterID()
{
auto& bus = pldm::utils::DBusHandler::getBus();
// VMM is a logical entity, so the bit 15 in entity type is set.
pdr::EntityType entityType = PLDM_ENTITY_VIRTUAL_MACHINE_MANAGER | 0x8000;
try
{
std::vector<std::vector<uint8_t>> VMMResponse{};
auto VMMMethod = bus.new_method_call(
"xyz.openbmc_project.PLDM", "/xyz/openbmc_project/pldm",
"xyz.openbmc_project.PLDM.PDR", "FindStateEffecterPDR");
VMMMethod.append(TID, entityType,
(uint16_t)PLDM_STATE_SET_SW_TERMINATION_STATUS);
auto VMMResponseMsg = bus.call(VMMMethod);
VMMResponseMsg.read(VMMResponse);
if (VMMResponse.size() != 0)
{
for (auto& rep : VMMResponse)
{
auto VMMPdr =
reinterpret_cast<pldm_state_effecter_pdr*>(rep.data());
effecterID = VMMPdr->effecter_id;
}
}
else
{
VMMPdrExist = false;
}
}
catch (const SdBusError& e)
{
std::cerr << "PLDM soft off: Error get VMM PDR,ERROR=" << e.what()
<< "\n";
VMMPdrExist = false;
}
if (VMMPdrExist)
{
return PLDM_SUCCESS;
}
// If the Virtual Machine Manager PDRs doesn't exist, go find the System
// Firmware PDRs.
// System Firmware is a logical entity, so the bit 15 in entity type is set
entityType = PLDM_ENTITY_SYS_FIRMWARE | 0x8000;
try
{
std::vector<std::vector<uint8_t>> sysFwResponse{};
auto sysFwMethod = bus.new_method_call(
"xyz.openbmc_project.PLDM", "/xyz/openbmc_project/pldm",
"xyz.openbmc_project.PLDM.PDR", "FindStateEffecterPDR");
sysFwMethod.append(TID, entityType,
(uint16_t)PLDM_STATE_SET_SW_TERMINATION_STATUS);
auto sysFwResponseMsg = bus.call(sysFwMethod);
sysFwResponseMsg.read(sysFwResponse);
if (sysFwResponse.size() == 0)
{
std::cerr
<< "No effecter ID has been found that matches the criteria"
<< "\n";
return PLDM_ERROR;
}
for (auto& rep : sysFwResponse)
{
auto sysFwPdr =
reinterpret_cast<pldm_state_effecter_pdr*>(rep.data());
effecterID = sysFwPdr->effecter_id;
}
}
catch (const SdBusError& e)
{
std::cerr << "PLDM soft off: Error get system firmware PDR,ERROR="
<< e.what() << "\n";
completed = true;
return PLDM_ERROR;
}
return PLDM_SUCCESS;
}
int SoftPowerOff::getSensorInfo()
{
pldm::pdr::EntityType entityType;
entityType = VMMPdrExist ? PLDM_ENTITY_VIRTUAL_MACHINE_MANAGER
: PLDM_ENTITY_SYS_FIRMWARE;
// The Virtual machine manager/System firmware is logical entity, so bit 15
// need to be set.
entityType = entityType | 0x8000;
try
{
auto& bus = pldm::utils::DBusHandler::getBus();
std::vector<std::vector<uint8_t>> Response{};
auto method = bus.new_method_call(
"xyz.openbmc_project.PLDM", "/xyz/openbmc_project/pldm",
"xyz.openbmc_project.PLDM.PDR", "FindStateSensorPDR");
method.append(TID, entityType,
(uint16_t)PLDM_STATE_SET_SW_TERMINATION_STATUS);
auto ResponseMsg = bus.call(method);
ResponseMsg.read(Response);
if (Response.size() == 0)
{
std::cerr
<< "No sensor PDR has been found that matches the criteria"
<< "\n";
return PLDM_ERROR;
}
pldm_state_sensor_pdr* pdr;
for (auto& rep : Response)
{
pdr = reinterpret_cast<pldm_state_sensor_pdr*>(rep.data());
}
if (!pdr)
{
std::cerr << "Failed to get state sensor PDR.\n";
return PLDM_ERROR;
}
sensorID = pdr->sensor_id;
auto compositeSensorCount = pdr->composite_sensor_count;
auto possibleStatesStart = pdr->possible_states;
for (auto offset = 0; offset < compositeSensorCount; offset++)
{
auto possibleStates =
reinterpret_cast<state_sensor_possible_states*>(
possibleStatesStart);
auto setId = possibleStates->state_set_id;
auto possibleStateSize = possibleStates->possible_states_size;
if (setId == PLDM_STATE_SET_SW_TERMINATION_STATUS)
{
sensorOffset = offset;
break;
}
possibleStatesStart +=
possibleStateSize + sizeof(setId) + sizeof(possibleStateSize);
}
}
catch (const SdBusError& e)
{
std::cerr << "PLDM soft off: Error get State Sensor PDR,ERROR="
<< e.what() << "\n";
return PLDM_ERROR;
}
return PLDM_SUCCESS;
}
int SoftPowerOff::hostSoftOff(sdeventplus::Event& event)
{
constexpr uint8_t effecterCount = 1;
uint8_t mctpEID;
uint8_t instanceID;
mctpEID = pldm::utils::readHostEID();
// Get instanceID
try
{
auto& bus = pldm::utils::DBusHandler::getBus();
auto method = bus.new_method_call(
"xyz.openbmc_project.PLDM", "/xyz/openbmc_project/pldm",
"xyz.openbmc_project.PLDM.Requester", "GetInstanceId");
method.append(mctpEID);
auto ResponseMsg = bus.call(method);
ResponseMsg.read(instanceID);
}
catch (const SdBusError& e)
{
std::cerr << "PLDM soft off: Error get instanceID,ERROR=" << e.what()
<< "\n";
return PLDM_ERROR;
}
std::array<uint8_t, sizeof(pldm_msg_hdr) + sizeof(effecterID) +
sizeof(effecterCount) +
sizeof(set_effecter_state_field)>
requestMsg{};
auto request = reinterpret_cast<pldm_msg*>(requestMsg.data());
set_effecter_state_field stateField{
PLDM_REQUEST_SET, PLDM_SW_TERM_GRACEFUL_SHUTDOWN_REQUESTED};
auto rc = encode_set_state_effecter_states_req(
instanceID, effecterID, effecterCount, &stateField, request);
if (rc != PLDM_SUCCESS)
{
std::cerr << "Message encode failure. PLDM error code = " << std::hex
<< std::showbase << rc << "\n";
return PLDM_ERROR;
}
// Open connection to MCTP socket
int fd = pldm_open();
if (-1 == fd)
{
std::cerr << "Failed to connect to mctp demux daemon"
<< "\n";
return PLDM_ERROR;
}
// Add a timer to the event loop, default 30s.
auto timerCallback = [=, this](Timer& /*source*/,
Timer::TimePoint /*time*/) {
if (!responseReceived)
{
std::cerr << "PLDM soft off: ERROR! Can't get the response for the "
"PLDM request msg. Time out!\n"
<< "Exit the pldm-softpoweroff\n";
exit(-1);
}
return;
};
Timer time(event, (Clock(event).now() + std::chrono::seconds{30}),
std::chrono::seconds{1}, std::move(timerCallback));
// Add a callback to handle EPOLLIN on fd
auto callback = [=, this](IO& io, int fd, uint32_t revents) {
if (!(revents & EPOLLIN))
{
return;
}
uint8_t* responseMsg = nullptr;
size_t responseMsgSize{};
auto rc = pldm_recv(mctpEID, fd, request->hdr.instance_id, &responseMsg,
&responseMsgSize);
if (rc)
{
return;
}
std::unique_ptr<uint8_t, decltype(std::free)*> responseMsgPtr{
responseMsg, std::free};
// We've got the response meant for the PLDM request msg that was
// sent out
io.set_enabled(Enabled::Off);
auto response = reinterpret_cast<pldm_msg*>(responseMsgPtr.get());
std::cerr << "Getting the response. PLDM RC = " << std::hex
<< std::showbase
<< static_cast<uint16_t>(response->payload[0]) << "\n";
responseReceived = true;
// Start Timer
using namespace std::chrono;
auto timeMicroseconds =
duration_cast<microseconds>(seconds(SOFTOFF_TIMEOUT_SECONDS));
auto ret = startTimer(timeMicroseconds);
if (ret < 0)
{
std::cerr << "Failure to start Host soft off wait timer, ERRNO = "
<< ret << "Exit the pldm-softpoweroff\n";
exit(-1);
}
else
{
std::cerr << "Timer started waiting for host soft off, "
"TIMEOUT_IN_SEC = "
<< SOFTOFF_TIMEOUT_SECONDS << "\n";
}
return;
};
IO io(event, fd, EPOLLIN, std::move(callback));
// Send PLDM Request message - pldm_send doesn't wait for response
rc = pldm_send(mctpEID, fd, requestMsg.data(), requestMsg.size());
if (0 > rc)
{
std::cerr << "Failed to send message/receive response. RC = " << rc
<< ", errno = " << errno << "\n";
return PLDM_ERROR;
}
// Time out or soft off complete
while (!isCompleted() && !isTimerExpired())
{
try
{
event.run(std::nullopt);
}
catch (const sdeventplus::SdEventError& e)
{
std::cerr
<< "PLDM host soft off: Failure in processing request.ERROR= "
<< e.what() << "\n";
return PLDM_ERROR;
}
}
return PLDM_SUCCESS;
}
int SoftPowerOff::startTimer(const std::chrono::microseconds& usec)
{
return timer.start(usec);
}
} // namespace pldm