| { |
| "entries": [ |
| { |
| "attribute_name": "vmi_if0_ipv4_prefix_length", |
| "lower_bound": 0, |
| "upper_bound": 32, |
| "scalar_increment": 1, |
| "default_value": 0, |
| "helpText": "vmi_if0_ipv4_prefix_length", |
| "displayName": "vmi_if0_ipv4_prefix_length" |
| }, |
| { |
| "attribute_name": "vmi_if1_ipv4_prefix_length", |
| "lower_bound": 0, |
| "upper_bound": 32, |
| "scalar_increment": 1, |
| "default_value": 0, |
| "helpText": "vmi_if1_ipv4_prefix_length", |
| "displayName": "vmi_if1_ipv4_prefix_length" |
| }, |
| { |
| "attribute_name": "vmi_if0_ipv6_prefix_length", |
| "lower_bound": 0, |
| "upper_bound": 128, |
| "scalar_increment": 1, |
| "default_value": 128, |
| "helpText": "vmi_if0_ipv6_prefix_length", |
| "displayName": "vmi_if0_ipv6_prefix_length" |
| }, |
| { |
| "attribute_name": "vmi_if1_ipv6_prefix_length", |
| "lower_bound": 0, |
| "upper_bound": 128, |
| "scalar_increment": 1, |
| "default_value": 128, |
| "helpText": "vmi_if1_ipv6_prefix_length", |
| "displayName": "vmi_if1_ipv6_prefix_length" |
| }, |
| { |
| "attribute_name": "hb_number_huge_pages", |
| "lower_bound": 0, |
| "upper_bound": 65535, |
| "scalar_increment": 1, |
| "default_value": 0, |
| "helpText": "Specifies the number of huge pages available for memory management, requires a reboot for a change to be applied.", |
| "displayName": "Number Huge Pages (pending)" |
| }, |
| { |
| "attribute_name": "hb_number_huge_pages_current", |
| "lower_bound": 0, |
| "upper_bound": 65535, |
| "scalar_increment": 1, |
| "default_value": 0, |
| "readOnly": true, |
| "helpText": "Specifies the number of huge pages available for memory management for the current IPL. Do not set this attribute directly; set hb_number_huge_pages instead.", |
| "displayName": "Number Huge Pages (current)" |
| }, |
| { |
| "attribute_name": "hb_huge_page_size", |
| "lower_bound": 0, |
| "upper_bound": 255, |
| "scalar_increment": 1, |
| "default_value": 0, |
| "helpText": "Specifies the size of huge pages, 0 = 16GB, requires a reboot for a change to be applied.", |
| "displayName": "Huge Page Size (pending)" |
| }, |
| { |
| "attribute_name": "hb_huge_page_size_current", |
| "lower_bound": 0, |
| "upper_bound": 255, |
| "scalar_increment": 1, |
| "default_value": 0, |
| "readOnly": true, |
| "helpText": "Specifies the size of huge pages, 0 = 16GB, for the current IPL. Do not set this attribute directly; set hb_huge_page_size instead.", |
| "displayName": "Huge Page Size (current)" |
| }, |
| { |
| "attribute_name": "hb_field_core_override", |
| "lower_bound": 0, |
| "upper_bound": 255, |
| "scalar_increment": 1, |
| "default_value": 0, |
| "helpText": "The maximum number of cores to activate where 0 being to activate all available cores. Requires a reboot for a change to be applied.", |
| "displayName": "Field Core Override (pending)" |
| }, |
| { |
| "attribute_name": "hb_field_core_override_current", |
| "lower_bound": 0, |
| "upper_bound": 255, |
| "scalar_increment": 1, |
| "default_value": 0, |
| "readOnly": true, |
| "helpText": "The maximum number of cores to activate where 0 being to activate all available cores. Value applicable for the current IPL. Do not set this attribute directly; set hb_field_core_override instead.", |
| "displayName": "Field Core Override (current)" |
| }, |
| { |
| "attribute_name": "hb_power_limit_in_watts", |
| "lower_bound": 0, |
| "upper_bound": 65535, |
| "scalar_increment": 1, |
| "default_value": 0, |
| "helpText": "Specifies the power limit in watts.", |
| "displayName": "Power Limit In Watts", |
| "dbus": { |
| "object_path": "/xyz/openbmc_project/control/host0/power_cap", |
| "interface": "xyz.openbmc_project.Control.Power.Cap", |
| "property_type": "uint32_t", |
| "property_name": "PowerCap" |
| } |
| }, |
| { |
| "attribute_name": "hb_max_number_huge_pages", |
| "lower_bound": 0, |
| "upper_bound": 65535, |
| "scalar_increment": 1, |
| "default_value": 0, |
| "readOnly": true, |
| "helpText": "Specifies the actual maximum number of huge pages available given the current system configuration.", |
| "displayName": "Max Number Huge Pages" |
| }, |
| { |
| "attribute_name": "hb_ioadapter_enlarged_capacity", |
| "lower_bound": 0, |
| "upper_bound": 21, |
| "scalar_increment": 1, |
| "default_value": 0, |
| "helpText": "Specifies the enlarged IO capacity, requires a reboot for a change to be applied.", |
| "displayName": "Enlarged IO Capacity (pending)" |
| }, |
| { |
| "attribute_name": "hb_ioadapter_enlarged_capacity_current", |
| "lower_bound": 0, |
| "upper_bound": 21, |
| "scalar_increment": 1, |
| "default_value": 0, |
| "readOnly": true, |
| "helpText": "Specifies the enlarged IO capacity for the current IPL. Do not set this attribute directly; set hb_ioadapter_enlarged_capacity instead.", |
| "displayName": "Enlarged IO Capacity (current)" |
| }, |
| { |
| "attribute_name": "hb_effective_secure_version", |
| "lower_bound": 0, |
| "upper_bound": 255, |
| "scalar_increment": 1, |
| "default_value": 0, |
| "readOnly": true, |
| "helpText": "Specifies the effective secure version of the host FW. In secure mode, the secure version value of a driver must be greater than or equal to this effective secure version to allow the system to boot.", |
| "displayName": "Effective Secure Version" |
| }, |
| { |
| "attribute_name": "hb_cap_freq_mhz_min", |
| "lower_bound": 0, |
| "upper_bound": 4294967295, |
| "scalar_increment": 1, |
| "default_value": 0, |
| "readOnly": true, |
| "helpText": "Specifies the lowest floor frequency across all chips in the system.", |
| "displayName": "Minimum Core Freq MHZ" |
| }, |
| { |
| "attribute_name": "hb_cap_freq_mhz_max", |
| "lower_bound": 0, |
| "upper_bound": 4294967295, |
| "scalar_increment": 1, |
| "default_value": 0, |
| "readOnly": true, |
| "helpText": "Specifies the highest ceiling frequency across all chips in the system.", |
| "displayName": "Maximum Core Freq MHZ" |
| }, |
| { |
| "attribute_name": "hb_cap_freq_mhz_request", |
| "lower_bound": 0, |
| "upper_bound": 4294967295, |
| "scalar_increment": 1, |
| "default_value": 0, |
| "helpText": "Specifies the desired frequency across all chips in the system. Requires a reboot for a change to be applied.", |
| "displayName": "Requested Core Freq MHZ (pending)" |
| }, |
| { |
| "attribute_name": "hb_cap_freq_mhz_request_current", |
| "lower_bound": 0, |
| "upper_bound": 4294967295, |
| "scalar_increment": 1, |
| "default_value": 0, |
| "readOnly": true, |
| "helpText": "Specifies the desired frequency across all chips in the system. Do not set this attribute directly; set hb_cap_freq_mhz_request instead.", |
| "displayName": "Requested Core Freq MHZ (current)" |
| }, |
| { |
| "attribute_name": "hb_storage_preallocation_for_drawer_attach", |
| "lower_bound": 0, |
| "upper_bound": 4, |
| "scalar_increment": 1, |
| "default_value": 4, |
| "helpText": "This option allocates platform memory during IPL for PCI-E slots to enable dynamic I/O drawer attachment.", |
| "displayName": "Dynamic I/O Drawer Attachment" |
| }, |
| { |
| "attribute_name": "hb_storage_preallocation_for_drawer_attach_current", |
| "lower_bound": 0, |
| "upper_bound": 4, |
| "scalar_increment": 1, |
| "default_value": 4, |
| "readOnly": true, |
| "helpText": "This option allocates platform memory during IPL for PCI-E slots to enable dynamic I/O drawer attachment.", |
| "displayName": "Dynamic I/O Drawer Attachment" |
| }, |
| { |
| "attribute_name": "pvm_rpd_scheduled_tod", |
| "lower_bound": 0, |
| "upper_bound": 86399, |
| "scalar_increment": 1, |
| "default_value": 0, |
| "helpText": "Only used when pvm_rpd_policy is set to “Scheduled”. This value represents the time of day in seconds at which to run the processor diagnostics.", |
| "displayName": "RPD Scheduled Run Time of Day in Seconds" |
| }, |
| { |
| "attribute_name": "pvm_rpd_scheduled_duration", |
| "lower_bound": 30, |
| "upper_bound": 1440, |
| "scalar_increment": 1, |
| "default_value": 1440, |
| "helpText": "Only used when pvm_rpd_policy is set to “Scheduled”. This value represents the duration in minutes to run the processor diagnostics, starting at the Scheduled Time of Day. Note: If the RPD is unable to test every core within the specified Run Time Duration, the RPD will resume where it left off, at the next Schedule Run Time of Day.", |
| "displayName": "RPD Scheduled Run Time Duration in Minutes" |
| }, |
| { |
| "attribute_name": "hb_power_PS0_input_voltage", |
| "lower_bound": 0, |
| "upper_bound": 65535, |
| "scalar_increment": 1, |
| "default_value": 0, |
| "readOnly": true, |
| "helpText": "Specifies power supply 0 input voltage(volts)", |
| "displayName": "Power Supply 0 input Voltage", |
| "dbus": { |
| "object_path": "/xyz/openbmc_project/sensors/voltage/ps0_input_voltage_rating", |
| "interface": "xyz.openbmc_project.Sensor.Value", |
| "property_type": "double", |
| "property_name": "Value" |
| } |
| }, |
| { |
| "attribute_name": "hb_power_PS1_input_voltage", |
| "lower_bound": 0, |
| "upper_bound": 65535, |
| "scalar_increment": 1, |
| "default_value": 0, |
| "readOnly": true, |
| "helpText": "Specifies power supply 1 input voltage(volts)", |
| "displayName": "Power Supply 1 input Voltage", |
| "dbus": { |
| "object_path": "/xyz/openbmc_project/sensors/voltage/ps1_input_voltage_rating", |
| "interface": "xyz.openbmc_project.Sensor.Value", |
| "property_type": "double", |
| "property_name": "Value" |
| } |
| }, |
| { |
| "attribute_name": "hb_power_PS2_input_voltage", |
| "lower_bound": 0, |
| "upper_bound": 65535, |
| "scalar_increment": 1, |
| "default_value": 0, |
| "readOnly": true, |
| "helpText": "Specifies power supply 2 input voltage(volts)", |
| "displayName": "Power Supply 2 input Voltage", |
| "dbus": { |
| "object_path": "/xyz/openbmc_project/sensors/voltage/ps2_input_voltage_rating", |
| "interface": "xyz.openbmc_project.Sensor.Value", |
| "property_type": "double", |
| "property_name": "Value" |
| } |
| }, |
| { |
| "attribute_name": "hb_power_PS3_input_voltage", |
| "lower_bound": 0, |
| "upper_bound": 65535, |
| "scalar_increment": 1, |
| "default_value": 0, |
| "readOnly": true, |
| "helpText": "Specifies power supply 3 input voltage(volts)", |
| "displayName": "Power Supply 3 input Voltage", |
| "dbus": { |
| "object_path": "/xyz/openbmc_project/sensors/voltage/ps3_input_voltage_rating", |
| "interface": "xyz.openbmc_project.Sensor.Value", |
| "property_type": "double", |
| "property_name": "Value" |
| } |
| }, |
| { |
| "attribute_name": "pvm_ibmi_vlan_tag_id", |
| "lower_bound": 0, |
| "upper_bound": 4094, |
| "scalar_increment": 1, |
| "default_value": 0, |
| "helpText": "Specifies the VLAN ID that is used when performing a network installation of an IBM i logical partition. Ethernet packets are tagged with the specified VLAN ID. If this option is not specified, Ethernet packets are untagged.", |
| "displayName": "VLAN Tag Identifier" |
| }, |
| { |
| "attribute_name": "pvm_ibmi_iscsi_target_port", |
| "lower_bound": 0, |
| "upper_bound": 65535, |
| "scalar_increment": 1, |
| "default_value": 0, |
| "helpText": "Specifies the port that is used for the iSCSI connection.", |
| "displayName": "Target Port" |
| }, |
| { |
| "attribute_name": "pvm_linux_kvm_percentage", |
| "lower_bound": 0, |
| "upper_bound": 1000, |
| "scalar_increment": 1, |
| "default_value": 0, |
| "helpText": "Specifies the percentage of available system memory that will be reserved for the management of KVM guests. The percentage is specified to the 10th of a percent.", |
| "displayName": "System Memory Reserved for KVM Guest Management" |
| }, |
| { |
| "attribute_name": "pvm_linux_kvm_percentage_current", |
| "lower_bound": 0, |
| "upper_bound": 1000, |
| "scalar_increment": 1, |
| "default_value": 0, |
| "readOnly": true, |
| "helpText": "Specifies the percentage of available system memory that will be reserved for the management of KVM guests. The percentage is specified to the 10th of a percent. Do not set this attribute directly; set pvm_linux_kvm_percentage instead.", |
| "displayName": "System Memory Reserved for KVM Guest Management (current)" |
| } |
| ] |
| } |