| #!/usr/bin/env python3 |
| |
| """Tool to visualize PLDM PDR's""" |
| |
| import argparse |
| import json |
| import hashlib |
| import sys |
| from datetime import datetime |
| import paramiko |
| from graphviz import Digraph |
| from tabulate import tabulate |
| import os |
| import shlex |
| import shutil |
| import subprocess |
| |
| |
| class Process: |
| """ Interface definition for interacting with a process created by an |
| Executor.""" |
| |
| def __init__(self, stdout, stderr): |
| """ Construct a Process object. Process object clients can read the |
| process stdout and stderr with os.read(), and can wait for the |
| process to exit. |
| |
| Parameters: |
| stdout: os.read()able stream representing stdout |
| stderr: os.read()able stream representing stderr |
| """ |
| |
| self.stdout = stdout |
| self.stderr = stderr |
| |
| def wait(self): |
| """ Wait for the process to finish, and return its exit status.""" |
| |
| raise NotImplementedError |
| |
| |
| class Executor: |
| """ Interface definition for interacting with executors. An executor is an |
| object that can run a program.""" |
| |
| def exec_command(self, cmd): |
| raise NotImplementedError |
| |
| def close(self): |
| pass |
| |
| |
| class ParamikoProcess(Process): |
| """ Concrete implementation of the Process interface that adapts Paramiko |
| interfaces to the Process interface requirements.""" |
| |
| def __init__(self, stdout, stderr): |
| super(ParamikoProcess, self).__init__(stdout, stderr) |
| |
| def wait(self): |
| return self.stderr.channel.recv_exit_status() |
| |
| |
| class ParamikoExecutor(Executor): |
| """ Concrete implementation of the Executor interface that uses |
| Paramiko to connect to a remote BMC to run the program.""" |
| |
| def __init__(self, hostname, uname, passwd, port, **kw): |
| """ This function is responsible for connecting to the BMC via |
| ssh and returning an executor object. |
| |
| Parameters: |
| hostname: hostname/IP address of BMC |
| uname: ssh username of BMC |
| passwd: ssh password of BMC |
| port: ssh port of BMC |
| """ |
| |
| super(ParamikoExecutor, self).__init__() |
| self.client = paramiko.SSHClient() |
| self.client.set_missing_host_key_policy(paramiko.AutoAddPolicy()) |
| self.client.connect( |
| hostname, username=uname, password=passwd, port=port, **kw) |
| |
| def exec_command(self, cmd): |
| _, stdout, stderr = self.client.exec_command(cmd) |
| return ParamikoProcess(stdout, stderr) |
| |
| def close(self): |
| self.client.close() |
| |
| |
| class SubprocessProcess(Process): |
| def __init__(self, popen): |
| self.popen = popen |
| super(SubprocessProcess, self).__init__(popen.stdout, popen.stderr) |
| |
| def wait(self): |
| self.popen.wait() |
| return self.popen.returncode |
| |
| |
| class SubprocessExecutor(Executor): |
| def __init__(self): |
| super(SubprocessExecutor, self).__init__() |
| |
| def exec_command(self, cmd): |
| args = shlex.split(cmd) |
| args[0] = shutil.which(args[0]) |
| p = subprocess.Popen( |
| args, stdout=subprocess.PIPE, stderr=subprocess.PIPE) |
| return SubprocessProcess(p) |
| |
| |
| def prepare_summary_report(state_sensor_pdr, state_effecter_pdr): |
| |
| """ This function is responsible to parse the state sensor pdr |
| and the state effecter pdr dictionaries and creating the |
| summary table. |
| |
| Parameters: |
| state_sensor_pdr: list of state sensor pdrs |
| state_effecter_pdr: list of state effecter pdrs |
| |
| """ |
| |
| summary_table = [] |
| headers = ["sensor_id", "entity_type", "state_set", "states"] |
| summary_table.append(headers) |
| for value in state_sensor_pdr.values(): |
| summary_record = [] |
| sensor_possible_states = '' |
| for sensor_state in value["possibleStates[0]"]: |
| sensor_possible_states += sensor_state+"\n" |
| summary_record.extend([value["sensorID"], value["entityType"], |
| value["stateSetID[0]"], |
| sensor_possible_states]) |
| summary_table.append(summary_record) |
| print("Created at : ", datetime.now().strftime("%Y-%m-%d %H:%M:%S")) |
| print(tabulate(summary_table, tablefmt="fancy_grid", headers="firstrow")) |
| |
| summary_table = [] |
| headers = ["effecter_id", "entity_type", "state_set", "states"] |
| summary_table.append(headers) |
| for value in state_effecter_pdr.values(): |
| summary_record = [] |
| effecter_possible_states = '' |
| for state in value["possibleStates[0]"]: |
| effecter_possible_states += state+"\n" |
| summary_record.extend([value["effecterID"], value["entityType"], |
| value["stateSetID[0]"], |
| effecter_possible_states]) |
| summary_table.append(summary_record) |
| print(tabulate(summary_table, tablefmt="fancy_grid", headers="firstrow")) |
| |
| |
| def draw_entity_associations(pdr, counter): |
| |
| """ This function is responsible to create a picture that captures |
| the entity association hierarchy based on the entity association |
| PDR's received from the BMC. |
| |
| Parameters: |
| pdr: list of entity association PDR's |
| counter: variable to capture the count of PDR's to unflatten |
| the tree |
| |
| """ |
| |
| dot = Digraph('entity_hierarchy', node_attr={'color': 'lightblue1', |
| 'style': 'filled'}) |
| dot.attr(label=r'\n\nEntity Relation Diagram < ' + |
| str(datetime.now().strftime("%Y-%m-%d %H:%M:%S"))+'>\n') |
| dot.attr(fontsize='20') |
| edge_list = [] |
| for value in pdr.values(): |
| parentnode = str(value["containerEntityType"]) + \ |
| str(value["containerEntityInstanceNumber"]) |
| dot.node(hashlib.md5((parentnode + |
| str(value["containerEntityContainerID"])) |
| .encode()).hexdigest(), parentnode) |
| |
| for i in range(1, value["containedEntityCount"]+1): |
| childnode = str(value[f"containedEntityType[{i}]"]) + \ |
| str(value[f"containedEntityInstanceNumber[{i}]"]) |
| cid = str(value[f"containedEntityContainerID[{i}]"]) |
| dot.node(hashlib.md5((childnode + cid) |
| .encode()).hexdigest(), childnode) |
| |
| if[hashlib.md5((parentnode + |
| str(value["containerEntityContainerID"])) |
| .encode()).hexdigest(), |
| hashlib.md5((childnode + cid) |
| .encode()).hexdigest()] not in edge_list: |
| edge_list.append([hashlib.md5((parentnode + |
| str(value["containerEntityContainerID"])) |
| .encode()).hexdigest(), |
| hashlib.md5((childnode + cid) |
| .encode()).hexdigest()]) |
| dot.edge(hashlib.md5((parentnode + |
| str(value["containerEntityContainerID"])) |
| .encode()).hexdigest(), |
| hashlib.md5((childnode + cid).encode()).hexdigest()) |
| unflattentree = dot.unflatten(stagger=(round(counter/3))) |
| unflattentree.render(filename='entity_association_' + |
| str(datetime.now().strftime("%Y-%m-%d_%H-%M-%S")), |
| view=False, cleanup=True, format='pdf') |
| |
| |
| class PLDMToolError(Exception): |
| """ Exception class intended to be used to hold pldmtool invocation failure |
| information such as exit status and stderr. |
| |
| """ |
| |
| def __init__(self, status, stderr): |
| msg = "pldmtool failed with exit status {}.\n".format(status) |
| msg += "stderr: \n\n{}".format(stderr) |
| super(PLDMToolError, self).__init__(msg) |
| self.status = status |
| |
| def get_status(self): |
| return self.status |
| |
| |
| def process_pldmtool_output(process): |
| """ Ensure pldmtool runs without error and if it does fail, detect that and |
| show the pldmtool exit status and it's stderr. |
| |
| A simpler implementation would just wait for the pldmtool exit status |
| prior to attempting to decode it's stdout. Instead, optimize for the |
| no error case and allow the json decoder to consume pldmtool stdout as |
| soon as it is available (in parallel). This results in the following |
| error scenarios: |
| - pldmtool fails and the decoder fails |
| Ignore the decoder fail and throw PLDMToolError. |
| - pldmtool fails and the decoder doesn't fail |
| Throw PLDMToolError. |
| - pldmtool doesn't fail and the decoder does fail |
| This is a pldmtool bug - re-throw the decoder error. |
| |
| Parameters: |
| process: A Process object providing process control functions like |
| wait, and access functions such as reading stdout and |
| stderr. |
| |
| """ |
| |
| status = 0 |
| try: |
| data = json.load(process.stdout) |
| # it's unlikely, but possible, that pldmtool failed but still wrote a |
| # valid json document - so check for that. |
| status = process.wait() |
| if status == 0: |
| return data |
| except json.decoder.JSONDecodeError: |
| # pldmtool wrote an invalid json document. Check to see if it had |
| # non-zero exit status. |
| status = process.wait() |
| if status == 0: |
| # pldmtool didn't have non zero exit status, so it wrote an invalid |
| # json document and the JSONDecodeError is the correct error. |
| raise |
| |
| # pldmtool had a non-zero exit status, so throw an error for that, possibly |
| # discarding a spurious JSONDecodeError exception. |
| raise PLDMToolError(status, "".join(process.stderr)) |
| |
| |
| def get_pdrs_one_at_a_time(executor): |
| """ Using pldmtool, generate (record handle, PDR) tuples for each record in |
| the PDR repository. |
| |
| Parameters: |
| executor: executor object for running pldmtool |
| |
| """ |
| |
| command_fmt = 'pldmtool platform getpdr -d {}' |
| record_handle = 0 |
| while True: |
| process = executor.exec_command(command_fmt.format(str(record_handle))) |
| pdr = process_pldmtool_output(process) |
| yield record_handle, pdr |
| record_handle = pdr["nextRecordHandle"] |
| if record_handle == 0: |
| break |
| |
| |
| def get_all_pdrs_at_once(executor): |
| """ Using pldmtool, generate (record handle, PDR) tuples for each record in |
| the PDR repository. Use pldmtool platform getpdr --all. |
| |
| Parameters: |
| executor: executor object for running pldmtool |
| |
| """ |
| |
| process = executor.exec_command('pldmtool platform getpdr -a') |
| all_pdrs = process_pldmtool_output(process) |
| |
| # Explicitly request record 0 to find out what the real first record is. |
| process = executor.exec_command('pldmtool platform getpdr -d 0') |
| pdr_0 = process_pldmtool_output(process) |
| record_handle = pdr_0["recordHandle"] |
| |
| while True: |
| for pdr in all_pdrs: |
| if pdr["recordHandle"] == record_handle: |
| yield record_handle, pdr |
| record_handle = pdr["nextRecordHandle"] |
| if record_handle == 0: |
| return |
| raise RuntimeError( |
| "Dangling reference to record {}".format(record_handle)) |
| |
| |
| def get_pdrs(executor): |
| """ Using pldmtool, generate (record handle, PDR) tuples for each record in |
| the PDR repository. Use pldmtool platform getpdr --all or fallback on |
| getting them one at a time if pldmtool doesn't support the --all |
| option. |
| |
| Parameters: |
| executor: executor object for running pldmtool |
| |
| """ |
| try: |
| for record_handle, pdr in get_all_pdrs_at_once(executor): |
| yield record_handle, pdr |
| return |
| except PLDMToolError as e: |
| # No support for the -a option |
| if e.get_status() != 106: |
| raise |
| except json.decoder.JSONDecodeError as e: |
| # Some versions of pldmtool don't print valid json documents with -a |
| if e.msg != "Extra data": |
| raise |
| |
| for record_handle, pdr in get_pdrs_one_at_a_time(executor): |
| yield record_handle, pdr |
| |
| |
| def fetch_pdrs_from_bmc(executor): |
| |
| """ This is the core function that would fire the getPDR pldmtool command |
| and it then agreegates the data received from all the calls into the |
| respective dictionaries based on the PDR Type. |
| |
| Parameters: |
| executor: executor object for running pldmtool |
| |
| """ |
| |
| entity_association_pdr = {} |
| state_sensor_pdr = {} |
| state_effecter_pdr = {} |
| state_effecter_pdr = {} |
| numeric_pdr = {} |
| fru_record_set_pdr = {} |
| tl_pdr = {} |
| for handle_number, my_dic in get_pdrs(executor): |
| if sys.stdout.isatty(): |
| sys.stdout.write( |
| "Fetching PDR's from BMC : %8d\r" % (handle_number)) |
| sys.stdout.flush() |
| if my_dic["PDRType"] == "Entity Association PDR": |
| entity_association_pdr[handle_number] = my_dic |
| if my_dic["PDRType"] == "State Sensor PDR": |
| state_sensor_pdr[handle_number] = my_dic |
| if my_dic["PDRType"] == "State Effecter PDR": |
| state_effecter_pdr[handle_number] = my_dic |
| if my_dic["PDRType"] == "FRU Record Set PDR": |
| fru_record_set_pdr[handle_number] = my_dic |
| if my_dic["PDRType"] == "Terminus Locator PDR": |
| tl_pdr[handle_number] = my_dic |
| if my_dic["PDRType"] == "Numeric Effecter PDR": |
| numeric_pdr[handle_number] = my_dic |
| executor.close() |
| |
| total_pdrs = len(entity_association_pdr.keys()) + len(tl_pdr.keys()) + \ |
| len(state_effecter_pdr.keys()) + len(numeric_pdr.keys()) + \ |
| len(state_sensor_pdr.keys()) + len(fru_record_set_pdr.keys()) |
| print("\nSuccessfully fetched " + str(total_pdrs) + " PDR\'s") |
| print("Number of FRU Record PDR's : ", len(fru_record_set_pdr.keys())) |
| print("Number of TerminusLocator PDR's : ", len(tl_pdr.keys())) |
| print("Number of State Sensor PDR's : ", len(state_sensor_pdr.keys())) |
| print("Number of State Effecter PDR's : ", len(state_effecter_pdr.keys())) |
| print("Number of Numeric Effecter PDR's : ", len(numeric_pdr.keys())) |
| print("Number of Entity Association PDR's : ", |
| len(entity_association_pdr.keys())) |
| return (entity_association_pdr, state_sensor_pdr, |
| state_effecter_pdr, len(fru_record_set_pdr.keys())) |
| |
| |
| def main(): |
| |
| """ Create a summary table capturing the information of all the PDR's |
| from the BMC & also create a diagram that captures the entity |
| association hierarchy.""" |
| |
| parser = argparse.ArgumentParser(prog='pldm_visualise_pdrs.py') |
| parser.add_argument('--bmc', type=str, help="BMC IPAddress/BMC Hostname") |
| parser.add_argument('--user', type=str, help="BMC username") |
| parser.add_argument('--password', type=str, help="BMC Password") |
| parser.add_argument('--port', type=int, help="BMC SSH port", |
| default=22) |
| args = parser.parse_args() |
| |
| extra_cfg = {} |
| if args.bmc: |
| try: |
| with open(os.path.expanduser("~/.ssh/config")) as f: |
| ssh_config = paramiko.SSHConfig() |
| ssh_config.parse(f) |
| host_config = ssh_config.lookup(args.bmc) |
| if host_config: |
| if 'hostname' in host_config: |
| args.bmc = host_config['hostname'] |
| if 'user' in host_config and args.user is None: |
| args.user = host_config['user'] |
| if 'proxycommand' in host_config: |
| extra_cfg['sock'] = paramiko.ProxyCommand( |
| host_config['proxycommand']) |
| except FileNotFoundError: |
| pass |
| |
| executor = ParamikoExecutor( |
| args.bmc, args.user, args.password, args.port, **extra_cfg) |
| elif shutil.which('pldmtool'): |
| executor = SubprocessExecutor() |
| else: |
| sys.exit("Can't find any PDRs: specify remote BMC with --bmc or " |
| "install pldmtool.") |
| |
| association_pdr, state_sensor_pdr, state_effecter_pdr, counter = \ |
| fetch_pdrs_from_bmc(executor) |
| draw_entity_associations(association_pdr, counter) |
| prepare_summary_report(state_sensor_pdr, state_effecter_pdr) |
| |
| |
| if __name__ == "__main__": |
| main() |