| /* |
| // Copyright (c) 2019 Intel Corporation |
| // |
| // Licensed under the Apache License, Version 2.0 (the "License"); |
| // you may not use this file except in compliance with the License. |
| // You may obtain a copy of the License at |
| // |
| // http://www.apache.org/licenses/LICENSE-2.0 |
| // |
| // Unless required by applicable law or agreed to in writing, software |
| // distributed under the License is distributed on an "AS IS" BASIS, |
| // WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| // See the License for the specific language governing permissions and |
| // limitations under the License. |
| */ |
| |
| #include "utils.hpp" |
| |
| #include <boost/algorithm/string/replace.hpp> |
| #include <boost/asio/steady_timer.hpp> |
| #include <boost/container/flat_set.hpp> |
| #include <filesystem> |
| #include <fstream> |
| #include <iostream> |
| #include <sdbusplus/asio/connection.hpp> |
| #include <sdbusplus/asio/object_server.hpp> |
| #include <sdbusplus/bus/match.hpp> |
| #include <string> |
| #include <utility> |
| |
| extern "C" { |
| #include <i2c/smbus.h> |
| #include <linux/i2c-dev.h> |
| } |
| |
| constexpr const char* configType = |
| "xyz.openbmc_project.Configuration.Intel_HSBP_CPLD"; |
| constexpr const char* busName = "xyz.openbmc_project.HsbpManager"; |
| |
| constexpr size_t scanRateSeconds = 5; |
| constexpr size_t maxDrives = 8; // only 1 byte alloted |
| |
| boost::asio::io_context io; |
| auto conn = std::make_shared<sdbusplus::asio::connection>(io); |
| sdbusplus::asio::object_server objServer(conn); |
| |
| static std::string zeroPad(const uint8_t val) |
| { |
| std::ostringstream version; |
| version << std::setw(2) << std::setfill('0') << static_cast<size_t>(val); |
| return version.str(); |
| } |
| |
| struct Mux |
| { |
| Mux(size_t busIn, size_t addressIn, size_t channelsIn, size_t indexIn) : |
| bus(busIn), address(addressIn), channels(channelsIn), index(indexIn) |
| { |
| } |
| size_t bus; |
| size_t address; |
| size_t channels; |
| size_t index; |
| |
| // to sort in the flat set |
| bool operator<(const Mux& rhs) const |
| { |
| return index < rhs.index; |
| } |
| }; |
| |
| enum class BlinkPattern : uint8_t |
| { |
| off = 0x0, |
| error = 0x2, |
| terminate = 0x3 |
| }; |
| |
| struct Led : std::enable_shared_from_this<Led> |
| { |
| // led pattern addresses start at 0x10 |
| Led(const std::string& path, size_t index, int fd) : |
| address(static_cast<uint8_t>(index + 0x10)), file(fd), |
| ledInterface(objServer.add_interface(path, ledGroup::interface)) |
| { |
| if (index >= maxDrives) |
| { |
| throw std::runtime_error("Invalid drive index"); |
| } |
| |
| if (!set(BlinkPattern::off)) |
| { |
| std::cerr << "Cannot initialize LED " << path << "\n"; |
| } |
| } |
| |
| // this has to be called outside the constructor for shared_from_this to |
| // work |
| void createInterface(void) |
| { |
| std::shared_ptr<Led> self = shared_from_this(); |
| |
| ledInterface->register_property( |
| ledGroup::asserted, false, [self](const bool req, bool& val) { |
| if (req == val) |
| { |
| return 1; |
| } |
| |
| if (!isPowerOn()) |
| { |
| std::cerr << "Can't change blink state when power is off\n"; |
| throw std::runtime_error( |
| "Can't change blink state when power is off"); |
| } |
| BlinkPattern pattern = |
| req ? BlinkPattern::error : BlinkPattern::terminate; |
| if (!self->set(pattern)) |
| { |
| std::cerr << "Can't change blink pattern\n"; |
| throw std::runtime_error("Cannot set blink pattern"); |
| } |
| val = req; |
| return 1; |
| }); |
| ledInterface->initialize(); |
| } |
| |
| virtual ~Led() |
| { |
| objServer.remove_interface(ledInterface); |
| } |
| |
| bool set(BlinkPattern pattern) |
| { |
| int ret = i2c_smbus_write_byte_data(file, address, |
| static_cast<uint8_t>(pattern)); |
| return ret >= 0; |
| } |
| |
| uint8_t address; |
| int file; |
| std::shared_ptr<sdbusplus::asio::dbus_interface> ledInterface; |
| }; |
| |
| struct Drive |
| { |
| Drive(size_t driveIndex, bool present, bool isOperational, bool nvme, |
| bool rebuilding) : |
| isNvme(nvme), |
| isPresent(present), index(driveIndex) |
| { |
| constexpr const char* basePath = |
| "/xyz/openbmc_project/inventory/item/drive/Drive_"; |
| itemIface = objServer.add_interface( |
| basePath + std::to_string(driveIndex), inventory::interface); |
| itemIface->register_property("Present", isPresent); |
| if (isPresent && !isNvme) |
| { |
| // nvme drives get detected by their fru |
| logDeviceAdded("Drive", std::to_string(index), "N/A"); |
| } |
| itemIface->register_property("PrettyName", |
| "Drive " + std::to_string(driveIndex)); |
| itemIface->initialize(); |
| operationalIface = objServer.add_interface( |
| itemIface->get_object_path(), |
| "xyz.openbmc_project.State.Decorator.OperationalStatus"); |
| |
| operationalIface->register_property( |
| "Functional", isOperational, |
| [this](const bool req, bool& property) { |
| if (!isPresent) |
| { |
| return 0; |
| } |
| if (property == req) |
| { |
| return 1; |
| } |
| property = req; |
| if (req) |
| { |
| clearFailed(); |
| return 1; |
| } |
| markFailed(); |
| return 1; |
| }); |
| |
| operationalIface->initialize(); |
| rebuildingIface = objServer.add_interface( |
| itemIface->get_object_path(), "xyz.openbmc_project.State.Drive"); |
| rebuildingIface->register_property("Rebuilding", rebuilding); |
| rebuildingIface->initialize(); |
| driveIface = |
| objServer.add_interface(itemIface->get_object_path(), |
| "xyz.openbmc_project.Inventory.Item.Drive"); |
| driveIface->initialize(); |
| associations = objServer.add_interface(itemIface->get_object_path(), |
| association::interface); |
| associations->register_property("Associations", |
| std::vector<Association>{}); |
| associations->initialize(); |
| |
| if (isPresent && (!isOperational || rebuilding)) |
| { |
| markFailed(); |
| } |
| } |
| virtual ~Drive() |
| { |
| objServer.remove_interface(itemIface); |
| objServer.remove_interface(operationalIface); |
| objServer.remove_interface(rebuildingIface); |
| objServer.remove_interface(assetIface); |
| objServer.remove_interface(driveIface); |
| objServer.remove_interface(associations); |
| } |
| |
| void createAsset( |
| const boost::container::flat_map<std::string, std::string>& data) |
| { |
| if (assetIface != nullptr) |
| { |
| return; |
| } |
| assetIface = objServer.add_interface( |
| itemIface->get_object_path(), |
| "xyz.openbmc_project.Inventory.Decorator.Asset"); |
| for (const auto& [key, value] : data) |
| { |
| assetIface->register_property(key, value); |
| } |
| assetIface->initialize(); |
| } |
| |
| void markFailed(void) |
| { |
| // todo: maybe look this up via mapper |
| constexpr const char* globalInventoryPath = |
| "/xyz/openbmc_project/CallbackManager"; |
| |
| if (!isPresent) |
| { |
| return; |
| } |
| |
| operationalIface->set_property("Functional", false); |
| std::vector<Association> warning = { |
| {"", "warning", globalInventoryPath}}; |
| associations->set_property("Associations", warning); |
| logDriveError("Drive " + std::to_string(index)); |
| } |
| |
| void clearFailed(void) |
| { |
| operationalIface->set_property("Functional", true); |
| associations->set_property("Associations", std::vector<Association>{}); |
| } |
| |
| void setPresent(bool set) |
| { |
| // nvme drives get detected by their fru |
| if (isNvme || set == isPresent) |
| { |
| return; |
| } |
| itemIface->set_property("Present", set); |
| isPresent = set; |
| if (isPresent) |
| { |
| logDeviceAdded("Drive", std::to_string(index), "N/A"); |
| } |
| else |
| { |
| logDeviceRemoved("Drive", std::to_string(index), "N/A"); |
| } |
| } |
| |
| std::shared_ptr<sdbusplus::asio::dbus_interface> itemIface; |
| std::shared_ptr<sdbusplus::asio::dbus_interface> operationalIface; |
| std::shared_ptr<sdbusplus::asio::dbus_interface> rebuildingIface; |
| std::shared_ptr<sdbusplus::asio::dbus_interface> assetIface; |
| std::shared_ptr<sdbusplus::asio::dbus_interface> driveIface; |
| std::shared_ptr<sdbusplus::asio::dbus_interface> associations; |
| |
| bool isNvme; |
| bool isPresent; |
| size_t index; |
| }; |
| |
| struct Backplane |
| { |
| |
| Backplane(size_t busIn, size_t addressIn, size_t backplaneIndexIn, |
| const std::string& nameIn) : |
| bus(busIn), |
| address(addressIn), backplaneIndex(backplaneIndexIn - 1), name(nameIn), |
| timer(std::make_shared<boost::asio::steady_timer>(io)), |
| muxes(std::make_shared<boost::container::flat_set<Mux>>()) |
| { |
| } |
| void populateAsset(const std::string& rootPath, const std::string& busname) |
| { |
| conn->async_method_call( |
| [assetIface{assetInterface}, hsbpIface{hsbpItemIface}]( |
| const boost::system::error_code ec, |
| const boost::container::flat_map< |
| std::string, std::variant<std::string>>& values) mutable { |
| if (ec) |
| { |
| std::cerr |
| << "Error getting asset tag from HSBP configuration\n"; |
| |
| return; |
| } |
| assetIface = objServer.add_interface( |
| hsbpIface->get_object_path(), assetTag); |
| for (const auto& [key, value] : values) |
| { |
| const std::string* ptr = std::get_if<std::string>(&value); |
| if (ptr == nullptr) |
| { |
| std::cerr << key << " Invalid type!\n"; |
| continue; |
| } |
| assetIface->register_property(key, *ptr); |
| } |
| assetIface->initialize(); |
| }, |
| busname, rootPath, "org.freedesktop.DBus.Properties", "GetAll", |
| assetTag); |
| } |
| |
| void run(const std::string& rootPath, const std::string& busname) |
| { |
| file = open(("/dev/i2c-" + std::to_string(bus)).c_str(), |
| O_RDWR | O_CLOEXEC); |
| if (file < 0) |
| { |
| std::cerr << "unable to open bus " << bus << "\n"; |
| return; |
| } |
| |
| if (ioctl(file, I2C_SLAVE_FORCE, address) < 0) |
| { |
| std::cerr << "unable to set address to " << address << "\n"; |
| return; |
| } |
| |
| if (!getPresent()) |
| { |
| std::cerr << "Cannot detect CPLD\n"; |
| return; |
| } |
| |
| getBootVer(bootVer); |
| getFPGAVer(fpgaVer); |
| getSecurityRev(securityRev); |
| std::string dbusName = boost::replace_all_copy(name, " ", "_"); |
| hsbpItemIface = objServer.add_interface( |
| "/xyz/openbmc_project/inventory/item/hsbp/" + dbusName, |
| inventory::interface); |
| hsbpItemIface->register_property("Present", true); |
| hsbpItemIface->register_property("PrettyName", name); |
| hsbpItemIface->initialize(); |
| |
| storageInterface = objServer.add_interface( |
| hsbpItemIface->get_object_path(), |
| "xyz.openbmc_project.Inventory.Item.StorageController"); |
| storageInterface->initialize(); |
| |
| versionIface = |
| objServer.add_interface("/xyz/openbmc_project/software/" + dbusName, |
| "xyz.openbmc_project.Software.Version"); |
| versionIface->register_property("Version", zeroPad(bootVer) + "." + |
| zeroPad(fpgaVer) + "." + |
| zeroPad(securityRev)); |
| versionIface->register_property( |
| "Purpose", |
| std::string( |
| "xyz.openbmc_project.Software.Version.VersionPurpose.HSBP")); |
| versionIface->initialize(); |
| getPresence(presence); |
| getIFDET(ifdet); |
| |
| populateAsset(rootPath, busname); |
| |
| createDrives(); |
| |
| runTimer(); |
| } |
| |
| void runTimer() |
| { |
| timer->expires_after(std::chrono::seconds(scanRateSeconds)); |
| timer->async_wait([this](boost::system::error_code ec) { |
| if (ec == boost::asio::error::operation_aborted) |
| { |
| // we're being destroyed |
| return; |
| } |
| else if (ec) |
| { |
| std::cerr << "timer error " << ec.message() << "\n"; |
| return; |
| } |
| |
| if (!isPowerOn()) |
| { |
| // can't access hsbp when power is off |
| runTimer(); |
| return; |
| } |
| uint8_t curPresence = 0; |
| uint8_t curIFDET = 0; |
| uint8_t curFailed = 0; |
| uint8_t curRebuild = 0; |
| |
| getPresence(curPresence); |
| getIFDET(curIFDET); |
| getFailed(curFailed); |
| getRebuild(curRebuild); |
| |
| if (curPresence != presence || curIFDET != ifdet || |
| curFailed != failed || curRebuild != rebuilding) |
| { |
| presence = curPresence; |
| ifdet = curIFDET; |
| failed = curFailed; |
| rebuilding = curRebuild; |
| updateDrives(); |
| } |
| runTimer(); |
| }); |
| } |
| |
| void createDrives() |
| { |
| uint8_t nvme = ifdet ^ presence; |
| for (size_t ii = 0; ii < maxDrives; ii++) |
| { |
| bool isNvme = nvme & (1 << ii); |
| bool isPresent = isNvme || (presence & (1 << ii)); |
| bool isFailed = !isPresent || failed & (1 << ii); |
| bool isRebuilding = !isPresent && (rebuilding & (1 << ii)); |
| |
| // +1 to convert from 0 based to 1 based |
| size_t driveIndex = (backplaneIndex * maxDrives) + ii + 1; |
| Drive& drive = drives.emplace_back(driveIndex, isPresent, !isFailed, |
| isNvme, isRebuilding); |
| std::shared_ptr<Led> led = leds.emplace_back(std::make_shared<Led>( |
| drive.itemIface->get_object_path(), ii, file)); |
| led->createInterface(); |
| } |
| } |
| |
| void updateDrives() |
| { |
| |
| uint8_t nvme = ifdet ^ presence; |
| size_t ii = 0; |
| |
| for (auto it = drives.begin(); it != drives.end(); it++, ii++) |
| { |
| bool isNvme = nvme & (1 << ii); |
| bool isPresent = isNvme || (presence & (1 << ii)); |
| bool isFailed = !isPresent || (failed & (1 << ii)); |
| bool isRebuilding = isPresent && (rebuilding & (1 << ii)); |
| |
| it->isNvme = isNvme; |
| it->setPresent(isPresent); |
| it->rebuildingIface->set_property("Rebuilding", isRebuilding); |
| if (isFailed || isRebuilding) |
| { |
| it->markFailed(); |
| } |
| else |
| { |
| it->clearFailed(); |
| } |
| } |
| } |
| |
| bool getPresent() |
| { |
| present = i2c_smbus_read_byte(file) >= 0; |
| return present; |
| } |
| |
| bool getTypeID(uint8_t& val) |
| { |
| constexpr uint8_t addr = 2; |
| int ret = i2c_smbus_read_byte_data(file, addr); |
| if (ret < 0) |
| { |
| std::cerr << "Error " << __FUNCTION__ << "\n"; |
| return false; |
| } |
| val = static_cast<uint8_t>(ret); |
| return true; |
| } |
| |
| bool getBootVer(uint8_t& val) |
| { |
| constexpr uint8_t addr = 3; |
| int ret = i2c_smbus_read_byte_data(file, addr); |
| if (ret < 0) |
| { |
| std::cerr << "Error " << __FUNCTION__ << "\n"; |
| return false; |
| } |
| val = static_cast<uint8_t>(ret); |
| return true; |
| } |
| |
| bool getFPGAVer(uint8_t& val) |
| { |
| constexpr uint8_t addr = 4; |
| int ret = i2c_smbus_read_byte_data(file, addr); |
| if (ret < 0) |
| { |
| std::cerr << "Error " << __FUNCTION__ << "\n"; |
| return false; |
| } |
| val = static_cast<uint8_t>(ret); |
| return true; |
| } |
| |
| bool getSecurityRev(uint8_t& val) |
| { |
| constexpr uint8_t addr = 5; |
| int ret = i2c_smbus_read_byte_data(file, addr); |
| if (ret < 0) |
| { |
| std::cerr << "Error " << __FUNCTION__ << "\n"; |
| return false; |
| } |
| val = static_cast<uint8_t>(ret); |
| return true; |
| } |
| |
| bool getPresence(uint8_t& val) |
| { |
| // NVMe drives do not assert PRSNTn, and as such do not get reported as |
| // PRESENT in this register |
| |
| constexpr uint8_t addr = 8; |
| |
| int ret = i2c_smbus_read_byte_data(file, addr); |
| if (ret < 0) |
| { |
| std::cerr << "Error " << __FUNCTION__ << "\n"; |
| return false; |
| } |
| // presence is inverted |
| val = static_cast<uint8_t>(~ret); |
| return true; |
| } |
| |
| bool getIFDET(uint8_t& val) |
| { |
| // This register is a bitmap of parallel GPIO pins connected to the |
| // IFDETn pin of a drive slot. SATA, SAS, and NVMe drives all assert |
| // IFDETn low when they are inserted into the HSBP.This register, in |
| // combination with the PRESENCE register, are used by the BMC to detect |
| // the presence of NVMe drives. |
| |
| constexpr uint8_t addr = 9; |
| |
| int ret = i2c_smbus_read_byte_data(file, addr); |
| if (ret < 0) |
| { |
| std::cerr << "Error " << __FUNCTION__ << "\n"; |
| return false; |
| } |
| // ifdet is inverted |
| val = static_cast<uint8_t>(~ret); |
| return true; |
| } |
| |
| bool getFailed(uint8_t& val) |
| { |
| constexpr uint8_t addr = 0xC; |
| int ret = i2c_smbus_read_byte_data(file, addr); |
| if (ret < 0) |
| { |
| std::cerr << "Error " << __FUNCTION__ << "\n"; |
| return false; |
| } |
| val = static_cast<uint8_t>(ret); |
| return true; |
| } |
| |
| bool getRebuild(uint8_t& val) |
| { |
| constexpr uint8_t addr = 0xD; |
| int ret = i2c_smbus_read_byte_data(file, addr); |
| if (ret < 0) |
| { |
| std::cerr << "Error " << __FUNCTION__ << "\n"; |
| return false; |
| } |
| val = static_cast<uint8_t>(ret); |
| return true; |
| } |
| |
| virtual ~Backplane() |
| { |
| objServer.remove_interface(hsbpItemIface); |
| objServer.remove_interface(versionIface); |
| if (file >= 0) |
| { |
| close(file); |
| } |
| } |
| |
| size_t bus; |
| size_t address; |
| size_t backplaneIndex; |
| std::string name; |
| std::shared_ptr<boost::asio::steady_timer> timer; |
| bool present = false; |
| uint8_t typeId = 0; |
| uint8_t bootVer = 0; |
| uint8_t fpgaVer = 0; |
| uint8_t securityRev = 0; |
| uint8_t funSupported = 0; |
| uint8_t presence = 0; |
| uint8_t ifdet = 0; |
| uint8_t failed = 0; |
| uint8_t rebuilding = 0; |
| |
| int file = -1; |
| |
| std::string type; |
| |
| std::shared_ptr<sdbusplus::asio::dbus_interface> hsbpItemIface; |
| std::shared_ptr<sdbusplus::asio::dbus_interface> versionIface; |
| std::shared_ptr<sdbusplus::asio::dbus_interface> storageInterface; |
| std::shared_ptr<sdbusplus::asio::dbus_interface> assetInterface; |
| |
| std::list<Drive> drives; |
| std::vector<std::shared_ptr<Led>> leds; |
| std::shared_ptr<boost::container::flat_set<Mux>> muxes; |
| }; |
| |
| std::unordered_map<std::string, Backplane> backplanes; |
| std::list<Drive> ownerlessDrives; // drives without a backplane |
| |
| static size_t getDriveCount() |
| { |
| size_t count = 0; |
| for (const auto& [key, backplane] : backplanes) |
| { |
| count += backplane.drives.size(); |
| } |
| return count + ownerlessDrives.size(); |
| } |
| |
| void updateAssets() |
| { |
| static constexpr const char* nvmeType = |
| "xyz.openbmc_project.Inventory.Item.NVMe"; |
| |
| conn->async_method_call( |
| [](const boost::system::error_code ec, const GetSubTreeType& subtree) { |
| if (ec) |
| { |
| std::cerr << "Error contacting mapper " << ec.message() << "\n"; |
| return; |
| } |
| |
| // drives may get an owner during this, or we might disover more |
| // drives |
| ownerlessDrives.clear(); |
| for (const auto& [path, objDict] : subtree) |
| { |
| if (objDict.empty()) |
| { |
| continue; |
| } |
| |
| const std::string& owner = objDict.begin()->first; |
| // we export this interface too |
| if (owner == busName) |
| { |
| continue; |
| } |
| if (std::find(objDict.begin()->second.begin(), |
| objDict.begin()->second.end(), |
| assetTag) == objDict.begin()->second.end()) |
| { |
| // no asset tag to associate to |
| continue; |
| } |
| |
| conn->async_method_call( |
| [path](const boost::system::error_code ec2, |
| const boost::container::flat_map< |
| std::string, |
| std::variant<uint64_t, std::string>>& values) { |
| if (ec2) |
| { |
| std::cerr << "Error Getting Config " |
| << ec2.message() << " " << __FUNCTION__ |
| << "\n"; |
| return; |
| } |
| auto findBus = values.find("Bus"); |
| |
| if (findBus == values.end()) |
| { |
| std::cerr << "Illegal interface at " << path |
| << "\n"; |
| return; |
| } |
| |
| // find the mux bus and addr |
| size_t muxBus = static_cast<size_t>( |
| std::get<uint64_t>(findBus->second)); |
| std::filesystem::path muxPath = |
| "/sys/bus/i2c/devices/i2c-" + |
| std::to_string(muxBus) + "/mux_device"; |
| if (!std::filesystem::is_symlink(muxPath)) |
| { |
| std::cerr << path << " mux does not exist\n"; |
| return; |
| } |
| |
| // we should be getting something of the form 7-0052 |
| // for bus 7 addr 52 |
| std::string fname = |
| std::filesystem::read_symlink(muxPath).filename(); |
| auto findDash = fname.find('-'); |
| |
| if (findDash == std::string::npos || |
| findDash + 1 >= fname.size()) |
| { |
| std::cerr << path << " mux path invalid\n"; |
| return; |
| } |
| |
| std::string busStr = fname.substr(0, findDash); |
| std::string muxStr = fname.substr(findDash + 1); |
| |
| size_t bus = static_cast<size_t>(std::stoi(busStr)); |
| size_t addr = |
| static_cast<size_t>(std::stoi(muxStr, nullptr, 16)); |
| size_t muxIndex = 0; |
| |
| // find the channel of the mux the drive is on |
| std::ifstream nameFile("/sys/bus/i2c/devices/i2c-" + |
| std::to_string(muxBus) + |
| "/name"); |
| if (!nameFile) |
| { |
| std::cerr << "Unable to open name file of bus " |
| << muxBus << "\n"; |
| return; |
| } |
| |
| std::string nameStr; |
| std::getline(nameFile, nameStr); |
| |
| // file is of the form "i2c-4-mux (chan_id 1)", get chan |
| // assume single digit chan |
| const std::string prefix = "chan_id "; |
| size_t findId = nameStr.find(prefix); |
| if (findId == std::string::npos || |
| findId + 1 >= nameStr.size()) |
| { |
| std::cerr << "Illegal name file on bus " << muxBus |
| << "\n"; |
| } |
| |
| std::string indexStr = |
| nameStr.substr(findId + prefix.size(), 1); |
| |
| size_t driveIndex = std::stoi(indexStr); |
| |
| Backplane* parent = nullptr; |
| for (auto& [name, backplane] : backplanes) |
| { |
| muxIndex = 0; |
| for (const Mux& mux : *(backplane.muxes)) |
| { |
| if (bus == mux.bus && addr == mux.address) |
| { |
| parent = &backplane; |
| break; |
| } |
| muxIndex += mux.channels; |
| } |
| } |
| boost::container::flat_map<std::string, std::string> |
| assetInventory; |
| const std::array<const char*, 4> assetKeys = { |
| "PartNumber", "SerialNumber", "Manufacturer", |
| "Model"}; |
| for (const auto& [key, value] : values) |
| { |
| if (std::find(assetKeys.begin(), assetKeys.end(), |
| key) == assetKeys.end()) |
| { |
| continue; |
| } |
| assetInventory[key] = std::get<std::string>(value); |
| } |
| |
| // assume its a M.2 or something without a hsbp |
| if (parent == nullptr) |
| { |
| auto& drive = ownerlessDrives.emplace_back( |
| getDriveCount() + 1, true, true, true, false); |
| drive.createAsset(assetInventory); |
| return; |
| } |
| |
| driveIndex += muxIndex; |
| |
| if (parent->drives.size() <= driveIndex) |
| { |
| std::cerr << "Illegal drive index at " << path |
| << " " << driveIndex << "\n"; |
| return; |
| } |
| auto it = parent->drives.begin(); |
| std::advance(it, driveIndex); |
| |
| it->createAsset(assetInventory); |
| }, |
| owner, path, "org.freedesktop.DBus.Properties", "GetAll", |
| "" /*all interface items*/); |
| } |
| }, |
| mapper::busName, mapper::path, mapper::interface, mapper::subtree, "/", |
| 0, std::array<const char*, 1>{nvmeType}); |
| } |
| |
| void populateMuxes(std::shared_ptr<boost::container::flat_set<Mux>> muxes, |
| std::string& rootPath) |
| { |
| const static std::array<const std::string, 4> muxTypes = { |
| "xyz.openbmc_project.Configuration.PCA9543Mux", |
| "xyz.openbmc_project.Configuration.PCA9544Mux", |
| "xyz.openbmc_project.Configuration.PCA9545Mux", |
| "xyz.openbmc_project.Configuration.PCA9546Mux"}; |
| conn->async_method_call( |
| [muxes](const boost::system::error_code ec, |
| const GetSubTreeType& subtree) { |
| if (ec) |
| { |
| std::cerr << "Error contacting mapper " << ec.message() << "\n"; |
| return; |
| } |
| std::shared_ptr<std::function<void()>> callback = |
| std::make_shared<std::function<void()>>( |
| []() { updateAssets(); }); |
| size_t index = 0; // as we use a flat map, these are sorted |
| for (const auto& [path, objDict] : subtree) |
| { |
| if (objDict.empty() || objDict.begin()->second.empty()) |
| { |
| continue; |
| } |
| |
| const std::string& owner = objDict.begin()->first; |
| const std::vector<std::string>& interfaces = |
| objDict.begin()->second; |
| |
| const std::string* interface = nullptr; |
| for (const std::string& iface : interfaces) |
| { |
| if (std::find(muxTypes.begin(), muxTypes.end(), iface) != |
| muxTypes.end()) |
| { |
| interface = &iface; |
| break; |
| } |
| } |
| if (interface == nullptr) |
| { |
| std::cerr << "Cannot get mux type\n"; |
| continue; |
| } |
| |
| conn->async_method_call( |
| [path, muxes, callback, index]( |
| const boost::system::error_code ec2, |
| const boost::container::flat_map< |
| std::string, |
| std::variant<uint64_t, std::vector<std::string>>>& |
| values) { |
| if (ec2) |
| { |
| std::cerr << "Error Getting Config " |
| << ec2.message() << " " << __FUNCTION__ |
| << "\n"; |
| return; |
| } |
| auto findBus = values.find("Bus"); |
| auto findAddress = values.find("Address"); |
| auto findChannelNames = values.find("ChannelNames"); |
| if (findBus == values.end() || |
| findAddress == values.end()) |
| { |
| std::cerr << "Illegal configuration at " << path |
| << "\n"; |
| return; |
| } |
| size_t bus = static_cast<size_t>( |
| std::get<uint64_t>(findBus->second)); |
| size_t address = static_cast<size_t>( |
| std::get<uint64_t>(findAddress->second)); |
| std::vector<std::string> channels = |
| std::get<std::vector<std::string>>( |
| findChannelNames->second); |
| muxes->emplace(bus, address, channels.size(), index); |
| if (callback.use_count() == 1) |
| { |
| (*callback)(); |
| } |
| }, |
| owner, path, "org.freedesktop.DBus.Properties", "GetAll", |
| *interface); |
| index++; |
| } |
| }, |
| mapper::busName, mapper::path, mapper::interface, mapper::subtree, |
| rootPath, 1, muxTypes); |
| } |
| |
| void populate() |
| { |
| conn->async_method_call( |
| [](const boost::system::error_code ec, const GetSubTreeType& subtree) { |
| if (ec) |
| { |
| std::cerr << "Error contacting mapper " << ec.message() << "\n"; |
| return; |
| } |
| for (const auto& [path, objDict] : subtree) |
| { |
| if (objDict.empty()) |
| { |
| continue; |
| } |
| |
| const std::string& owner = objDict.begin()->first; |
| conn->async_method_call( |
| [path, owner](const boost::system::error_code ec2, |
| const boost::container::flat_map< |
| std::string, BasicVariantType>& resp) { |
| if (ec2) |
| { |
| std::cerr << "Error Getting Config " |
| << ec2.message() << "\n"; |
| return; |
| } |
| backplanes.clear(); |
| std::optional<size_t> bus; |
| std::optional<size_t> address; |
| std::optional<size_t> backplaneIndex; |
| std::optional<std::string> name; |
| for (const auto& [key, value] : resp) |
| { |
| if (key == "Bus") |
| { |
| bus = std::get<uint64_t>(value); |
| } |
| else if (key == "Address") |
| { |
| address = std::get<uint64_t>(value); |
| } |
| else if (key == "Index") |
| { |
| backplaneIndex = std::get<uint64_t>(value); |
| } |
| else if (key == "Name") |
| { |
| name = std::get<std::string>(value); |
| } |
| } |
| if (!bus || !address || !name || !backplaneIndex) |
| { |
| std::cerr << "Illegal configuration at " << path |
| << "\n"; |
| return; |
| } |
| std::string parentPath = |
| std::filesystem::path(path).parent_path(); |
| const auto& [backplane, status] = backplanes.emplace( |
| *name, |
| Backplane(*bus, *address, *backplaneIndex, *name)); |
| backplane->second.run(parentPath, owner); |
| populateMuxes(backplane->second.muxes, parentPath); |
| }, |
| owner, path, "org.freedesktop.DBus.Properties", "GetAll", |
| configType); |
| } |
| }, |
| mapper::busName, mapper::path, mapper::interface, mapper::subtree, "/", |
| 0, std::array<const char*, 1>{configType}); |
| } |
| |
| int main() |
| { |
| boost::asio::steady_timer callbackTimer(io); |
| |
| conn->request_name(busName); |
| |
| sdbusplus::bus::match::match match( |
| *conn, |
| "type='signal',member='PropertiesChanged',arg0='" + |
| std::string(configType) + "'", |
| [&callbackTimer](sdbusplus::message::message&) { |
| callbackTimer.expires_after(std::chrono::seconds(2)); |
| callbackTimer.async_wait([](const boost::system::error_code ec) { |
| if (ec == boost::asio::error::operation_aborted) |
| { |
| // timer was restarted |
| return; |
| } |
| else if (ec) |
| { |
| std::cerr << "Timer error" << ec.message() << "\n"; |
| return; |
| } |
| populate(); |
| }); |
| }); |
| |
| sdbusplus::bus::match::match drive( |
| *conn, |
| "type='signal',member='PropertiesChanged',arg0='xyz.openbmc_project." |
| "Inventory.Item.NVMe'", |
| [&callbackTimer](sdbusplus::message::message& message) { |
| callbackTimer.expires_after(std::chrono::seconds(2)); |
| if (message.get_sender() == conn->get_unique_name()) |
| { |
| return; |
| } |
| callbackTimer.async_wait([](const boost::system::error_code ec) { |
| if (ec == boost::asio::error::operation_aborted) |
| { |
| // timer was restarted |
| return; |
| } |
| else if (ec) |
| { |
| std::cerr << "Timer error" << ec.message() << "\n"; |
| return; |
| } |
| populate(); |
| }); |
| }); |
| |
| auto iface = |
| objServer.add_interface("/xyz/openbmc_project/inventory/item/storage", |
| "xyz.openbmc_project.inventory.item.storage"); |
| |
| io.post([]() { populate(); }); |
| setupPowerMatch(conn); |
| io.run(); |
| } |