| /** |
| * Copyright © 2016 Google Inc. |
| * Copyright © 2016 IBM Corporation |
| * |
| * Licensed under the Apache License, Version 2.0 (the "License"); |
| * you may not use this file except in compliance with the License. |
| * You may obtain a copy of the License at |
| * |
| * http://www.apache.org/licenses/LICENSE-2.0 |
| * |
| * Unless required by applicable law or agreed to in writing, software |
| * distributed under the License is distributed on an "AS IS" BASIS, |
| * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| * See the License for the specific language governing permissions and |
| * limitations under the License. |
| */ |
| |
| #include "gpio_configs.h" |
| |
| #include <stdio.h> |
| #include <stdlib.h> |
| #include <string.h> |
| #include <glib.h> |
| |
| gboolean read_gpios(GDBusConnection *connection, GpioConfigs *gpios) |
| { |
| GDBusProxy *proxy; |
| GError *error = NULL; |
| GVariant *value; |
| |
| GVariantIter *power_up_outs_iter; |
| GVariantIter *reset_outs_iter; |
| GVariantIter *pci_reset_outs_iter; |
| gchar *power_up_out_name; |
| gchar *reset_out_name; |
| gchar *pci_reset_out_name; |
| gboolean power_up_polarity; |
| gboolean reset_out_polarity; |
| gboolean pci_reset_out_polarity; |
| gboolean pci_reset_out_hold; |
| |
| GVariantIter *optionals_iter; |
| gchar *optional_name; |
| gboolean optional_polarity; |
| int i; |
| |
| proxy = g_dbus_proxy_new_sync(connection, |
| G_DBUS_PROXY_FLAGS_NONE, |
| NULL, /* GDBusInterfaceInfo */ |
| "org.openbmc.managers.System", /* name */ |
| "/org/openbmc/managers/System", /* object path */ |
| "org.openbmc.managers.System", /* interface */ |
| NULL, /* GCancellable */ |
| &error); |
| if(error != NULL) { |
| fprintf(stderr, "Unable to create proxy: %s\n", error->message); |
| g_error_free(error); |
| return FALSE; |
| } |
| |
| value = g_dbus_proxy_call_sync(proxy, |
| "getGpioConfiguration", |
| NULL, |
| G_DBUS_CALL_FLAGS_NONE, |
| -1, |
| NULL, |
| &error); |
| if(error != NULL) { |
| fprintf(stderr, "Power GPIO: call to getGpioConfiguration failed: %s\n", |
| error->message); |
| g_error_free(error); |
| return FALSE; |
| } |
| |
| g_assert(value != NULL); |
| memset(gpios, 0, sizeof(*gpios)); |
| g_variant_get( |
| value, "(&s&sa(sb)a(sb)a(sbb)&s&s&s&sa(sb))", |
| &gpios->power_gpio.power_good_in.name, &gpios->power_gpio.latch_out.name, |
| &power_up_outs_iter, &reset_outs_iter, &pci_reset_outs_iter, |
| &gpios->hostctl_gpio.fsi_data.name, &gpios->hostctl_gpio.fsi_clk.name, |
| &gpios->hostctl_gpio.fsi_enable.name, &gpios->hostctl_gpio.cronus_sel.name, |
| &optionals_iter); |
| |
| g_print("Power GPIO latch output: %s\n", gpios->power_gpio.latch_out.name); |
| if(*gpios->power_gpio.latch_out.name != '\0') { /* latch is optional */ |
| gpios->power_gpio.latch_out.name = strdup(gpios->power_gpio.latch_out.name); |
| } |
| else { |
| gpios->power_gpio.latch_out.name = NULL; |
| } |
| g_print("Power GPIO power good input: %s\n", gpios->power_gpio.power_good_in.name); |
| gpios->power_gpio.power_good_in.name = g_strdup(gpios->power_gpio.power_good_in.name); |
| gpios->power_gpio.num_power_up_outs = g_variant_iter_n_children( |
| power_up_outs_iter); |
| g_print("Power GPIO %zu power_up outputs\n", |
| gpios->power_gpio.num_power_up_outs); |
| gpios->power_gpio.power_up_outs = g_malloc0_n(gpios->power_gpio.num_power_up_outs, |
| sizeof(GPIO)); |
| gpios->power_gpio.power_up_pols = g_malloc0_n(gpios->power_gpio.num_power_up_outs, |
| sizeof(gboolean)); |
| for(i = 0; g_variant_iter_next(power_up_outs_iter, "(&sb)", |
| &power_up_out_name, &power_up_polarity); |
| i++) { |
| g_print("Power GPIO power_up[%d] = %s active %s\n", i, |
| power_up_out_name, power_up_polarity ? "HIGH" : "LOW"); |
| gpios->power_gpio.power_up_outs[i].name = g_strdup(power_up_out_name); |
| gpios->power_gpio.power_up_pols[i] = power_up_polarity; |
| } |
| gpios->power_gpio.num_reset_outs = g_variant_iter_n_children(reset_outs_iter); |
| g_print("Power GPIO %zu reset outputs\n", gpios->power_gpio.num_reset_outs); |
| gpios->power_gpio.reset_outs = g_malloc0_n(gpios->power_gpio.num_reset_outs, sizeof(GPIO)); |
| gpios->power_gpio.reset_pols = g_malloc0_n(gpios->power_gpio.num_reset_outs, |
| sizeof(gboolean)); |
| for(i = 0; g_variant_iter_next(reset_outs_iter, "(&sb)", &reset_out_name, |
| &reset_out_polarity); i++) { |
| g_print("Power GPIO reset[%d] = %s active %s\n", i, reset_out_name, |
| reset_out_polarity ? "HIGH" : "LOW"); |
| gpios->power_gpio.reset_outs[i].name = g_strdup(reset_out_name); |
| gpios->power_gpio.reset_pols[i] = reset_out_polarity; |
| } |
| |
| gpios->power_gpio.num_pci_reset_outs = g_variant_iter_n_children(pci_reset_outs_iter); |
| g_print("Power GPIO %d pci reset outputs\n", gpios->power_gpio.num_pci_reset_outs); |
| gpios->power_gpio.pci_reset_outs = g_malloc0_n(gpios->power_gpio.num_pci_reset_outs, |
| sizeof(GPIO)); |
| gpios->power_gpio.pci_reset_pols = g_malloc0_n(gpios->power_gpio.num_pci_reset_outs, |
| sizeof(gboolean)); |
| gpios->power_gpio.pci_reset_holds = g_malloc0_n(gpios->power_gpio.num_pci_reset_outs, |
| sizeof(gboolean)); |
| for(i = 0; g_variant_iter_next(pci_reset_outs_iter, "(&sbb)", &pci_reset_out_name, |
| &pci_reset_out_polarity, &pci_reset_out_hold); i++) { |
| g_print("Power GPIO pci reset[%d] = %s active %s, hold - %s\n", i, |
| pci_reset_out_name, |
| pci_reset_out_polarity ? "HIGH" : "LOW", |
| pci_reset_out_hold ? "Yes" : "No"); |
| gpios->power_gpio.pci_reset_outs[i].name = g_strdup(pci_reset_out_name); |
| gpios->power_gpio.pci_reset_pols[i] = pci_reset_out_polarity; |
| gpios->power_gpio.pci_reset_holds[i] = pci_reset_out_hold; |
| } |
| |
| |
| g_print("FSI DATA GPIO: %s\n", gpios->hostctl_gpio.fsi_data.name); |
| gpios->hostctl_gpio.fsi_data.name = strdup(gpios->hostctl_gpio.fsi_data.name); |
| |
| g_print("FSI CLK GPIO: %s\n", gpios->hostctl_gpio.fsi_clk.name); |
| gpios->hostctl_gpio.fsi_clk.name = strdup(gpios->hostctl_gpio.fsi_clk.name); |
| |
| g_print("FSI ENABLE GPIO: %s\n", gpios->hostctl_gpio.fsi_enable.name); |
| gpios->hostctl_gpio.fsi_enable.name = strdup(gpios->hostctl_gpio.fsi_enable.name); |
| |
| g_print("CRONUS SEL GPIO: %s\n", gpios->hostctl_gpio.cronus_sel.name); |
| gpios->hostctl_gpio.cronus_sel.name = strdup(gpios->hostctl_gpio.cronus_sel.name); |
| |
| gpios->hostctl_gpio.num_optionals = g_variant_iter_n_children(optionals_iter); |
| g_print("Hostctl GPIO optionals: %zu\n", gpios->hostctl_gpio.num_optionals); |
| gpios->hostctl_gpio.optionals = g_malloc0_n(gpios->hostctl_gpio.num_optionals, sizeof(GPIO)); |
| gpios->hostctl_gpio.optional_pols = g_malloc0_n(gpios->hostctl_gpio.num_optionals, sizeof(gboolean)); |
| for (i = 0; g_variant_iter_next(optionals_iter, "(&sb)", &optional_name, &optional_polarity); ++i) { |
| g_print("Hostctl optional GPIO[%d] = %s active %s\n", i, optional_name, optional_polarity ? "HIGH" : "LOW"); |
| gpios->hostctl_gpio.optionals[i].name = g_strdup(optional_name); |
| gpios->hostctl_gpio.optional_pols[i] = optional_polarity; |
| } |
| |
| g_variant_iter_free(power_up_outs_iter); |
| g_variant_iter_free(reset_outs_iter); |
| g_variant_iter_free(pci_reset_outs_iter); |
| g_variant_iter_free(optionals_iter); |
| g_variant_unref(value); |
| |
| return TRUE; |
| } |
| |
| void free_gpios(GpioConfigs *gpios) { |
| int i; |
| g_free(gpios->power_gpio.latch_out.name); |
| g_free(gpios->power_gpio.power_good_in.name); |
| for(i = 0; i < gpios->power_gpio.num_power_up_outs; i++) { |
| g_free(gpios->power_gpio.power_up_outs[i].name); |
| } |
| g_free(gpios->power_gpio.power_up_outs); |
| g_free(gpios->power_gpio.power_up_pols); |
| for(i = 0; i < gpios->power_gpio.num_reset_outs; i++) { |
| g_free(gpios->power_gpio.reset_outs[i].name); |
| } |
| g_free(gpios->power_gpio.reset_outs); |
| g_free(gpios->power_gpio.reset_pols); |
| for(i = 0; i < gpios->power_gpio.num_pci_reset_outs; i++) { |
| g_free(gpios->power_gpio.pci_reset_outs[i].name); |
| } |
| g_free(gpios->power_gpio.pci_reset_outs); |
| g_free(gpios->power_gpio.pci_reset_pols); |
| g_free(gpios->power_gpio.pci_reset_holds); |
| |
| g_free(gpios->hostctl_gpio.fsi_data.name); |
| g_free(gpios->hostctl_gpio.fsi_clk.name); |
| g_free(gpios->hostctl_gpio.fsi_enable.name); |
| g_free(gpios->hostctl_gpio.cronus_sel.name); |
| for (i = 0; i < gpios->hostctl_gpio.num_optionals; ++i) { |
| g_free(gpios->hostctl_gpio.optionals[i].name); |
| } |
| } |