blob: 3eab9e15a1cac899c79dff53c48abd0a57cc5a2b [file] [log] [blame]
/*
* Generated by gdbus-codegen 2.40.2. DO NOT EDIT.
*
* The license of this code is the same as for the source it was derived from.
*/
#ifdef HAVE_CONFIG_H
# include "config.h"
#endif
#include "interfaces/control.h"
#include <string.h>
#ifdef G_OS_UNIX
# include <gio/gunixfdlist.h>
#endif
typedef struct
{
GDBusArgInfo parent_struct;
gboolean use_gvariant;
} _ExtendedGDBusArgInfo;
typedef struct
{
GDBusMethodInfo parent_struct;
const gchar *signal_name;
gboolean pass_fdlist;
} _ExtendedGDBusMethodInfo;
typedef struct
{
GDBusSignalInfo parent_struct;
const gchar *signal_name;
} _ExtendedGDBusSignalInfo;
typedef struct
{
GDBusPropertyInfo parent_struct;
const gchar *hyphen_name;
gboolean use_gvariant;
} _ExtendedGDBusPropertyInfo;
typedef struct
{
GDBusInterfaceInfo parent_struct;
const gchar *hyphen_name;
} _ExtendedGDBusInterfaceInfo;
typedef struct
{
const _ExtendedGDBusPropertyInfo *info;
guint prop_id;
GValue orig_value; /* the value before the change */
} ChangedProperty;
static void
_changed_property_free (ChangedProperty *data)
{
g_value_unset (&data->orig_value);
g_free (data);
}
static gboolean
_g_strv_equal0 (gchar **a, gchar **b)
{
gboolean ret = FALSE;
guint n;
if (a == NULL && b == NULL)
{
ret = TRUE;
goto out;
}
if (a == NULL || b == NULL)
goto out;
if (g_strv_length (a) != g_strv_length (b))
goto out;
for (n = 0; a[n] != NULL; n++)
if (g_strcmp0 (a[n], b[n]) != 0)
goto out;
ret = TRUE;
out:
return ret;
}
static gboolean
_g_variant_equal0 (GVariant *a, GVariant *b)
{
gboolean ret = FALSE;
if (a == NULL && b == NULL)
{
ret = TRUE;
goto out;
}
if (a == NULL || b == NULL)
goto out;
ret = g_variant_equal (a, b);
out:
return ret;
}
G_GNUC_UNUSED static gboolean
_g_value_equal (const GValue *a, const GValue *b)
{
gboolean ret = FALSE;
g_assert (G_VALUE_TYPE (a) == G_VALUE_TYPE (b));
switch (G_VALUE_TYPE (a))
{
case G_TYPE_BOOLEAN:
ret = (g_value_get_boolean (a) == g_value_get_boolean (b));
break;
case G_TYPE_UCHAR:
ret = (g_value_get_uchar (a) == g_value_get_uchar (b));
break;
case G_TYPE_INT:
ret = (g_value_get_int (a) == g_value_get_int (b));
break;
case G_TYPE_UINT:
ret = (g_value_get_uint (a) == g_value_get_uint (b));
break;
case G_TYPE_INT64:
ret = (g_value_get_int64 (a) == g_value_get_int64 (b));
break;
case G_TYPE_UINT64:
ret = (g_value_get_uint64 (a) == g_value_get_uint64 (b));
break;
case G_TYPE_DOUBLE:
{
/* Avoid -Wfloat-equal warnings by doing a direct bit compare */
gdouble da = g_value_get_double (a);
gdouble db = g_value_get_double (b);
ret = memcmp (&da, &db, sizeof (gdouble)) == 0;
}
break;
case G_TYPE_STRING:
ret = (g_strcmp0 (g_value_get_string (a), g_value_get_string (b)) == 0);
break;
case G_TYPE_VARIANT:
ret = _g_variant_equal0 (g_value_get_variant (a), g_value_get_variant (b));
break;
default:
if (G_VALUE_TYPE (a) == G_TYPE_STRV)
ret = _g_strv_equal0 (g_value_get_boxed (a), g_value_get_boxed (b));
else
g_critical ("_g_value_equal() does not handle type %s", g_type_name (G_VALUE_TYPE (a)));
break;
}
return ret;
}
/* ------------------------------------------------------------------------
* Code for interface org.openbmc.Control
* ------------------------------------------------------------------------
*/
/**
* SECTION:Control
* @title: Control
* @short_description: Generated C code for the org.openbmc.Control D-Bus interface
*
* This section contains code for working with the <link linkend="gdbus-interface-org-openbmc-Control.top_of_page">org.openbmc.Control</link> D-Bus interface in C.
*/
/* ---- Introspection data for org.openbmc.Control ---- */
static const _ExtendedGDBusArgInfo _control_method_info_set_poll_interval_IN_ARG_poll_interval =
{
{
-1,
(gchar *) "poll_interval",
(gchar *) "i",
NULL
},
FALSE
};
static const _ExtendedGDBusArgInfo * const _control_method_info_set_poll_interval_IN_ARG_pointers[] =
{
&_control_method_info_set_poll_interval_IN_ARG_poll_interval,
NULL
};
static const _ExtendedGDBusMethodInfo _control_method_info_set_poll_interval =
{
{
-1,
(gchar *) "setPollInterval",
(GDBusArgInfo **) &_control_method_info_set_poll_interval_IN_ARG_pointers,
NULL,
NULL
},
"handle-set-poll-interval",
FALSE
};
static const _ExtendedGDBusMethodInfo * const _control_method_info_pointers[] =
{
&_control_method_info_set_poll_interval,
NULL
};
static const _ExtendedGDBusArgInfo _control_signal_info_heartbeat_ARG_bus_name =
{
{
-1,
(gchar *) "bus_name",
(gchar *) "s",
NULL
},
FALSE
};
static const _ExtendedGDBusArgInfo * const _control_signal_info_heartbeat_ARG_pointers[] =
{
&_control_signal_info_heartbeat_ARG_bus_name,
NULL
};
static const _ExtendedGDBusSignalInfo _control_signal_info_heartbeat =
{
{
-1,
(gchar *) "Heartbeat",
(GDBusArgInfo **) &_control_signal_info_heartbeat_ARG_pointers,
NULL
},
"heartbeat"
};
static const _ExtendedGDBusSignalInfo * const _control_signal_info_pointers[] =
{
&_control_signal_info_heartbeat,
NULL
};
static const _ExtendedGDBusPropertyInfo _control_property_info_poll_interval =
{
{
-1,
(gchar *) "poll_interval",
(gchar *) "i",
G_DBUS_PROPERTY_INFO_FLAGS_READABLE,
NULL
},
"poll-interval",
FALSE
};
static const _ExtendedGDBusPropertyInfo _control_property_info_heatbeat =
{
{
-1,
(gchar *) "heatbeat",
(gchar *) "i",
G_DBUS_PROPERTY_INFO_FLAGS_READABLE,
NULL
},
"heatbeat",
FALSE
};
static const _ExtendedGDBusPropertyInfo * const _control_property_info_pointers[] =
{
&_control_property_info_poll_interval,
&_control_property_info_heatbeat,
NULL
};
static const _ExtendedGDBusInterfaceInfo _control_interface_info =
{
{
-1,
(gchar *) "org.openbmc.Control",
(GDBusMethodInfo **) &_control_method_info_pointers,
(GDBusSignalInfo **) &_control_signal_info_pointers,
(GDBusPropertyInfo **) &_control_property_info_pointers,
NULL
},
"control",
};
/**
* control_interface_info:
*
* Gets a machine-readable description of the <link linkend="gdbus-interface-org-openbmc-Control.top_of_page">org.openbmc.Control</link> D-Bus interface.
*
* Returns: (transfer none): A #GDBusInterfaceInfo. Do not free.
*/
GDBusInterfaceInfo *
control_interface_info (void)
{
return (GDBusInterfaceInfo *) &_control_interface_info.parent_struct;
}
/**
* control_override_properties:
* @klass: The class structure for a #GObject<!-- -->-derived class.
* @property_id_begin: The property id to assign to the first overridden property.
*
* Overrides all #GObject properties in the #Control interface for a concrete class.
* The properties are overridden in the order they are defined.
*
* Returns: The last property id.
*/
guint
control_override_properties (GObjectClass *klass, guint property_id_begin)
{
g_object_class_override_property (klass, property_id_begin++, "poll-interval");
g_object_class_override_property (klass, property_id_begin++, "heatbeat");
return property_id_begin - 1;
}
/**
* Control:
*
* Abstract interface type for the D-Bus interface <link linkend="gdbus-interface-org-openbmc-Control.top_of_page">org.openbmc.Control</link>.
*/
/**
* ControlIface:
* @parent_iface: The parent interface.
* @handle_set_poll_interval: Handler for the #Control::handle-set-poll-interval signal.
* @get_heatbeat: Getter for the #Control:heatbeat property.
* @get_poll_interval: Getter for the #Control:poll-interval property.
* @heartbeat: Handler for the #Control::heartbeat signal.
*
* Virtual table for the D-Bus interface <link linkend="gdbus-interface-org-openbmc-Control.top_of_page">org.openbmc.Control</link>.
*/
typedef ControlIface ControlInterface;
G_DEFINE_INTERFACE (Control, control, G_TYPE_OBJECT);
static void
control_default_init (ControlIface *iface)
{
/* GObject signals for incoming D-Bus method calls: */
/**
* Control::handle-set-poll-interval:
* @object: A #Control.
* @invocation: A #GDBusMethodInvocation.
* @arg_poll_interval: Argument passed by remote caller.
*
* Signal emitted when a remote caller is invoking the <link linkend="gdbus-method-org-openbmc-Control.setPollInterval">setPollInterval()</link> D-Bus method.
*
* If a signal handler returns %TRUE, it means the signal handler will handle the invocation (e.g. take a reference to @invocation and eventually call control_complete_set_poll_interval() or e.g. g_dbus_method_invocation_return_error() on it) and no order signal handlers will run. If no signal handler handles the invocation, the %G_DBUS_ERROR_UNKNOWN_METHOD error is returned.
*
* Returns: %TRUE if the invocation was handled, %FALSE to let other signal handlers run.
*/
g_signal_new ("handle-set-poll-interval",
G_TYPE_FROM_INTERFACE (iface),
G_SIGNAL_RUN_LAST,
G_STRUCT_OFFSET (ControlIface, handle_set_poll_interval),
g_signal_accumulator_true_handled,
NULL,
g_cclosure_marshal_generic,
G_TYPE_BOOLEAN,
2,
G_TYPE_DBUS_METHOD_INVOCATION, G_TYPE_INT);
/* GObject signals for received D-Bus signals: */
/**
* Control::heartbeat:
* @object: A #Control.
* @arg_bus_name: Argument.
*
* On the client-side, this signal is emitted whenever the D-Bus signal <link linkend="gdbus-signal-org-openbmc-Control.Heartbeat">"Heartbeat"</link> is received.
*
* On the service-side, this signal can be used with e.g. g_signal_emit_by_name() to make the object emit the D-Bus signal.
*/
g_signal_new ("heartbeat",
G_TYPE_FROM_INTERFACE (iface),
G_SIGNAL_RUN_LAST,
G_STRUCT_OFFSET (ControlIface, heartbeat),
NULL,
NULL,
g_cclosure_marshal_generic,
G_TYPE_NONE,
1, G_TYPE_STRING);
/* GObject properties for D-Bus properties: */
/**
* Control:poll-interval:
*
* Represents the D-Bus property <link linkend="gdbus-property-org-openbmc-Control.poll_interval">"poll_interval"</link>.
*
* Since the D-Bus property for this #GObject property is readable but not writable, it is meaningful to read from it on both the client- and service-side. It is only meaningful, however, to write to it on the service-side.
*/
g_object_interface_install_property (iface,
g_param_spec_int ("poll-interval", "poll_interval", "poll_interval", G_MININT32, G_MAXINT32, 0, G_PARAM_READWRITE | G_PARAM_STATIC_STRINGS));
/**
* Control:heatbeat:
*
* Represents the D-Bus property <link linkend="gdbus-property-org-openbmc-Control.heatbeat">"heatbeat"</link>.
*
* Since the D-Bus property for this #GObject property is readable but not writable, it is meaningful to read from it on both the client- and service-side. It is only meaningful, however, to write to it on the service-side.
*/
g_object_interface_install_property (iface,
g_param_spec_int ("heatbeat", "heatbeat", "heatbeat", G_MININT32, G_MAXINT32, 0, G_PARAM_READWRITE | G_PARAM_STATIC_STRINGS));
}
/**
* control_get_poll_interval: (skip)
* @object: A #Control.
*
* Gets the value of the <link linkend="gdbus-property-org-openbmc-Control.poll_interval">"poll_interval"</link> D-Bus property.
*
* Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.
*
* Returns: The property value.
*/
gint
control_get_poll_interval (Control *object)
{
return CONTROL_GET_IFACE (object)->get_poll_interval (object);
}
/**
* control_set_poll_interval: (skip)
* @object: A #Control.
* @value: The value to set.
*
* Sets the <link linkend="gdbus-property-org-openbmc-Control.poll_interval">"poll_interval"</link> D-Bus property to @value.
*
* Since this D-Bus property is not writable, it is only meaningful to use this function on the service-side.
*/
void
control_set_poll_interval (Control *object, gint value)
{
g_object_set (G_OBJECT (object), "poll-interval", value, NULL);
}
/**
* control_get_heatbeat: (skip)
* @object: A #Control.
*
* Gets the value of the <link linkend="gdbus-property-org-openbmc-Control.heatbeat">"heatbeat"</link> D-Bus property.
*
* Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.
*
* Returns: The property value.
*/
gint
control_get_heatbeat (Control *object)
{
return CONTROL_GET_IFACE (object)->get_heatbeat (object);
}
/**
* control_set_heatbeat: (skip)
* @object: A #Control.
* @value: The value to set.
*
* Sets the <link linkend="gdbus-property-org-openbmc-Control.heatbeat">"heatbeat"</link> D-Bus property to @value.
*
* Since this D-Bus property is not writable, it is only meaningful to use this function on the service-side.
*/
void
control_set_heatbeat (Control *object, gint value)
{
g_object_set (G_OBJECT (object), "heatbeat", value, NULL);
}
/**
* control_emit_heartbeat:
* @object: A #Control.
* @arg_bus_name: Argument to pass with the signal.
*
* Emits the <link linkend="gdbus-signal-org-openbmc-Control.Heartbeat">"Heartbeat"</link> D-Bus signal.
*/
void
control_emit_heartbeat (
Control *object,
const gchar *arg_bus_name)
{
g_signal_emit_by_name (object, "heartbeat", arg_bus_name);
}
/**
* control_call_set_poll_interval:
* @proxy: A #ControlProxy.
* @arg_poll_interval: Argument to pass with the method invocation.
* @cancellable: (allow-none): A #GCancellable or %NULL.
* @callback: A #GAsyncReadyCallback to call when the request is satisfied or %NULL.
* @user_data: User data to pass to @callback.
*
* Asynchronously invokes the <link linkend="gdbus-method-org-openbmc-Control.setPollInterval">setPollInterval()</link> D-Bus method on @proxy.
* When the operation is finished, @callback will be invoked in the <link linkend="g-main-context-push-thread-default">thread-default main loop</link> of the thread you are calling this method from.
* You can then call control_call_set_poll_interval_finish() to get the result of the operation.
*
* See control_call_set_poll_interval_sync() for the synchronous, blocking version of this method.
*/
void
control_call_set_poll_interval (
Control *proxy,
gint arg_poll_interval,
GCancellable *cancellable,
GAsyncReadyCallback callback,
gpointer user_data)
{
g_dbus_proxy_call (G_DBUS_PROXY (proxy),
"setPollInterval",
g_variant_new ("(i)",
arg_poll_interval),
G_DBUS_CALL_FLAGS_NONE,
-1,
cancellable,
callback,
user_data);
}
/**
* control_call_set_poll_interval_finish:
* @proxy: A #ControlProxy.
* @res: The #GAsyncResult obtained from the #GAsyncReadyCallback passed to control_call_set_poll_interval().
* @error: Return location for error or %NULL.
*
* Finishes an operation started with control_call_set_poll_interval().
*
* Returns: (skip): %TRUE if the call succeded, %FALSE if @error is set.
*/
gboolean
control_call_set_poll_interval_finish (
Control *proxy,
GAsyncResult *res,
GError **error)
{
GVariant *_ret;
_ret = g_dbus_proxy_call_finish (G_DBUS_PROXY (proxy), res, error);
if (_ret == NULL)
goto _out;
g_variant_get (_ret,
"()");
g_variant_unref (_ret);
_out:
return _ret != NULL;
}
/**
* control_call_set_poll_interval_sync:
* @proxy: A #ControlProxy.
* @arg_poll_interval: Argument to pass with the method invocation.
* @cancellable: (allow-none): A #GCancellable or %NULL.
* @error: Return location for error or %NULL.
*
* Synchronously invokes the <link linkend="gdbus-method-org-openbmc-Control.setPollInterval">setPollInterval()</link> D-Bus method on @proxy. The calling thread is blocked until a reply is received.
*
* See control_call_set_poll_interval() for the asynchronous version of this method.
*
* Returns: (skip): %TRUE if the call succeded, %FALSE if @error is set.
*/
gboolean
control_call_set_poll_interval_sync (
Control *proxy,
gint arg_poll_interval,
GCancellable *cancellable,
GError **error)
{
GVariant *_ret;
_ret = g_dbus_proxy_call_sync (G_DBUS_PROXY (proxy),
"setPollInterval",
g_variant_new ("(i)",
arg_poll_interval),
G_DBUS_CALL_FLAGS_NONE,
-1,
cancellable,
error);
if (_ret == NULL)
goto _out;
g_variant_get (_ret,
"()");
g_variant_unref (_ret);
_out:
return _ret != NULL;
}
/**
* control_complete_set_poll_interval:
* @object: A #Control.
* @invocation: (transfer full): A #GDBusMethodInvocation.
*
* Helper function used in service implementations to finish handling invocations of the <link linkend="gdbus-method-org-openbmc-Control.setPollInterval">setPollInterval()</link> D-Bus method. If you instead want to finish handling an invocation by returning an error, use g_dbus_method_invocation_return_error() or similar.
*
* This method will free @invocation, you cannot use it afterwards.
*/
void
control_complete_set_poll_interval (
Control *object,
GDBusMethodInvocation *invocation)
{
g_dbus_method_invocation_return_value (invocation,
g_variant_new ("()"));
}
/* ------------------------------------------------------------------------ */
/**
* ControlProxy:
*
* The #ControlProxy structure contains only private data and should only be accessed using the provided API.
*/
/**
* ControlProxyClass:
* @parent_class: The parent class.
*
* Class structure for #ControlProxy.
*/
struct _ControlProxyPrivate
{
GData *qdata;
};
static void control_proxy_iface_init (ControlIface *iface);
#if GLIB_VERSION_MAX_ALLOWED >= GLIB_VERSION_2_38
G_DEFINE_TYPE_WITH_CODE (ControlProxy, control_proxy, G_TYPE_DBUS_PROXY,
G_ADD_PRIVATE (ControlProxy)
G_IMPLEMENT_INTERFACE (TYPE_CONTROL, control_proxy_iface_init));
#else
G_DEFINE_TYPE_WITH_CODE (ControlProxy, control_proxy, G_TYPE_DBUS_PROXY,
G_IMPLEMENT_INTERFACE (TYPE_CONTROL, control_proxy_iface_init));
#endif
static void
control_proxy_finalize (GObject *object)
{
ControlProxy *proxy = CONTROL_PROXY (object);
g_datalist_clear (&proxy->priv->qdata);
G_OBJECT_CLASS (control_proxy_parent_class)->finalize (object);
}
static void
control_proxy_get_property (GObject *object,
guint prop_id,
GValue *value,
GParamSpec *pspec G_GNUC_UNUSED)
{
const _ExtendedGDBusPropertyInfo *info;
GVariant *variant;
g_assert (prop_id != 0 && prop_id - 1 < 2);
info = _control_property_info_pointers[prop_id - 1];
variant = g_dbus_proxy_get_cached_property (G_DBUS_PROXY (object), info->parent_struct.name);
if (info->use_gvariant)
{
g_value_set_variant (value, variant);
}
else
{
if (variant != NULL)
g_dbus_gvariant_to_gvalue (variant, value);
}
if (variant != NULL)
g_variant_unref (variant);
}
static void
control_proxy_set_property_cb (GDBusProxy *proxy,
GAsyncResult *res,
gpointer user_data)
{
const _ExtendedGDBusPropertyInfo *info = user_data;
GError *error;
GVariant *_ret;
error = NULL;
_ret = g_dbus_proxy_call_finish (proxy, res, &error);
if (!_ret)
{
g_warning ("Error setting property '%s' on interface org.openbmc.Control: %s (%s, %d)",
info->parent_struct.name,
error->message, g_quark_to_string (error->domain), error->code);
g_error_free (error);
}
else
{
g_variant_unref (_ret);
}
}
static void
control_proxy_set_property (GObject *object,
guint prop_id,
const GValue *value,
GParamSpec *pspec G_GNUC_UNUSED)
{
const _ExtendedGDBusPropertyInfo *info;
GVariant *variant;
g_assert (prop_id != 0 && prop_id - 1 < 2);
info = _control_property_info_pointers[prop_id - 1];
variant = g_dbus_gvalue_to_gvariant (value, G_VARIANT_TYPE (info->parent_struct.signature));
g_dbus_proxy_call (G_DBUS_PROXY (object),
"org.freedesktop.DBus.Properties.Set",
g_variant_new ("(ssv)", "org.openbmc.Control", info->parent_struct.name, variant),
G_DBUS_CALL_FLAGS_NONE,
-1,
NULL, (GAsyncReadyCallback) control_proxy_set_property_cb, (GDBusPropertyInfo *) &info->parent_struct);
g_variant_unref (variant);
}
static void
control_proxy_g_signal (GDBusProxy *proxy,
const gchar *sender_name G_GNUC_UNUSED,
const gchar *signal_name,
GVariant *parameters)
{
_ExtendedGDBusSignalInfo *info;
GVariantIter iter;
GVariant *child;
GValue *paramv;
guint num_params;
guint n;
guint signal_id;
info = (_ExtendedGDBusSignalInfo *) g_dbus_interface_info_lookup_signal ((GDBusInterfaceInfo *) &_control_interface_info.parent_struct, signal_name);
if (info == NULL)
return;
num_params = g_variant_n_children (parameters);
paramv = g_new0 (GValue, num_params + 1);
g_value_init (&paramv[0], TYPE_CONTROL);
g_value_set_object (&paramv[0], proxy);
g_variant_iter_init (&iter, parameters);
n = 1;
while ((child = g_variant_iter_next_value (&iter)) != NULL)
{
_ExtendedGDBusArgInfo *arg_info = (_ExtendedGDBusArgInfo *) info->parent_struct.args[n - 1];
if (arg_info->use_gvariant)
{
g_value_init (&paramv[n], G_TYPE_VARIANT);
g_value_set_variant (&paramv[n], child);
n++;
}
else
g_dbus_gvariant_to_gvalue (child, &paramv[n++]);
g_variant_unref (child);
}
signal_id = g_signal_lookup (info->signal_name, TYPE_CONTROL);
g_signal_emitv (paramv, signal_id, 0, NULL);
for (n = 0; n < num_params + 1; n++)
g_value_unset (&paramv[n]);
g_free (paramv);
}
static void
control_proxy_g_properties_changed (GDBusProxy *_proxy,
GVariant *changed_properties,
const gchar *const *invalidated_properties)
{
ControlProxy *proxy = CONTROL_PROXY (_proxy);
guint n;
const gchar *key;
GVariantIter *iter;
_ExtendedGDBusPropertyInfo *info;
g_variant_get (changed_properties, "a{sv}", &iter);
while (g_variant_iter_next (iter, "{&sv}", &key, NULL))
{
info = (_ExtendedGDBusPropertyInfo *) g_dbus_interface_info_lookup_property ((GDBusInterfaceInfo *) &_control_interface_info.parent_struct, key);
g_datalist_remove_data (&proxy->priv->qdata, key);
if (info != NULL)
g_object_notify (G_OBJECT (proxy), info->hyphen_name);
}
g_variant_iter_free (iter);
for (n = 0; invalidated_properties[n] != NULL; n++)
{
info = (_ExtendedGDBusPropertyInfo *) g_dbus_interface_info_lookup_property ((GDBusInterfaceInfo *) &_control_interface_info.parent_struct, invalidated_properties[n]);
g_datalist_remove_data (&proxy->priv->qdata, invalidated_properties[n]);
if (info != NULL)
g_object_notify (G_OBJECT (proxy), info->hyphen_name);
}
}
static gint
control_proxy_get_poll_interval (Control *object)
{
ControlProxy *proxy = CONTROL_PROXY (object);
GVariant *variant;
gint value = 0;
variant = g_dbus_proxy_get_cached_property (G_DBUS_PROXY (proxy), "poll_interval");
if (variant != NULL)
{
value = g_variant_get_int32 (variant);
g_variant_unref (variant);
}
return value;
}
static gint
control_proxy_get_heatbeat (Control *object)
{
ControlProxy *proxy = CONTROL_PROXY (object);
GVariant *variant;
gint value = 0;
variant = g_dbus_proxy_get_cached_property (G_DBUS_PROXY (proxy), "heatbeat");
if (variant != NULL)
{
value = g_variant_get_int32 (variant);
g_variant_unref (variant);
}
return value;
}
static void
control_proxy_init (ControlProxy *proxy)
{
#if GLIB_VERSION_MAX_ALLOWED >= GLIB_VERSION_2_38
proxy->priv = control_proxy_get_instance_private (proxy);
#else
proxy->priv = G_TYPE_INSTANCE_GET_PRIVATE (proxy, TYPE_CONTROL_PROXY, ControlProxyPrivate);
#endif
g_dbus_proxy_set_interface_info (G_DBUS_PROXY (proxy), control_interface_info ());
}
static void
control_proxy_class_init (ControlProxyClass *klass)
{
GObjectClass *gobject_class;
GDBusProxyClass *proxy_class;
gobject_class = G_OBJECT_CLASS (klass);
gobject_class->finalize = control_proxy_finalize;
gobject_class->get_property = control_proxy_get_property;
gobject_class->set_property = control_proxy_set_property;
proxy_class = G_DBUS_PROXY_CLASS (klass);
proxy_class->g_signal = control_proxy_g_signal;
proxy_class->g_properties_changed = control_proxy_g_properties_changed;
control_override_properties (gobject_class, 1);
#if GLIB_VERSION_MAX_ALLOWED < GLIB_VERSION_2_38
g_type_class_add_private (klass, sizeof (ControlProxyPrivate));
#endif
}
static void
control_proxy_iface_init (ControlIface *iface)
{
iface->get_poll_interval = control_proxy_get_poll_interval;
iface->get_heatbeat = control_proxy_get_heatbeat;
}
/**
* control_proxy_new:
* @connection: A #GDBusConnection.
* @flags: Flags from the #GDBusProxyFlags enumeration.
* @name: (allow-none): A bus name (well-known or unique) or %NULL if @connection is not a message bus connection.
* @object_path: An object path.
* @cancellable: (allow-none): A #GCancellable or %NULL.
* @callback: A #GAsyncReadyCallback to call when the request is satisfied.
* @user_data: User data to pass to @callback.
*
* Asynchronously creates a proxy for the D-Bus interface <link linkend="gdbus-interface-org-openbmc-Control.top_of_page">org.openbmc.Control</link>. See g_dbus_proxy_new() for more details.
*
* When the operation is finished, @callback will be invoked in the <link linkend="g-main-context-push-thread-default">thread-default main loop</link> of the thread you are calling this method from.
* You can then call control_proxy_new_finish() to get the result of the operation.
*
* See control_proxy_new_sync() for the synchronous, blocking version of this constructor.
*/
void
control_proxy_new (
GDBusConnection *connection,
GDBusProxyFlags flags,
const gchar *name,
const gchar *object_path,
GCancellable *cancellable,
GAsyncReadyCallback callback,
gpointer user_data)
{
g_async_initable_new_async (TYPE_CONTROL_PROXY, G_PRIORITY_DEFAULT, cancellable, callback, user_data, "g-flags", flags, "g-name", name, "g-connection", connection, "g-object-path", object_path, "g-interface-name", "org.openbmc.Control", NULL);
}
/**
* control_proxy_new_finish:
* @res: The #GAsyncResult obtained from the #GAsyncReadyCallback passed to control_proxy_new().
* @error: Return location for error or %NULL
*
* Finishes an operation started with control_proxy_new().
*
* Returns: (transfer full) (type ControlProxy): The constructed proxy object or %NULL if @error is set.
*/
Control *
control_proxy_new_finish (
GAsyncResult *res,
GError **error)
{
GObject *ret;
GObject *source_object;
source_object = g_async_result_get_source_object (res);
ret = g_async_initable_new_finish (G_ASYNC_INITABLE (source_object), res, error);
g_object_unref (source_object);
if (ret != NULL)
return CONTROL (ret);
else
return NULL;
}
/**
* control_proxy_new_sync:
* @connection: A #GDBusConnection.
* @flags: Flags from the #GDBusProxyFlags enumeration.
* @name: (allow-none): A bus name (well-known or unique) or %NULL if @connection is not a message bus connection.
* @object_path: An object path.
* @cancellable: (allow-none): A #GCancellable or %NULL.
* @error: Return location for error or %NULL
*
* Synchronously creates a proxy for the D-Bus interface <link linkend="gdbus-interface-org-openbmc-Control.top_of_page">org.openbmc.Control</link>. See g_dbus_proxy_new_sync() for more details.
*
* The calling thread is blocked until a reply is received.
*
* See control_proxy_new() for the asynchronous version of this constructor.
*
* Returns: (transfer full) (type ControlProxy): The constructed proxy object or %NULL if @error is set.
*/
Control *
control_proxy_new_sync (
GDBusConnection *connection,
GDBusProxyFlags flags,
const gchar *name,
const gchar *object_path,
GCancellable *cancellable,
GError **error)
{
GInitable *ret;
ret = g_initable_new (TYPE_CONTROL_PROXY, cancellable, error, "g-flags", flags, "g-name", name, "g-connection", connection, "g-object-path", object_path, "g-interface-name", "org.openbmc.Control", NULL);
if (ret != NULL)
return CONTROL (ret);
else
return NULL;
}
/**
* control_proxy_new_for_bus:
* @bus_type: A #GBusType.
* @flags: Flags from the #GDBusProxyFlags enumeration.
* @name: A bus name (well-known or unique).
* @object_path: An object path.
* @cancellable: (allow-none): A #GCancellable or %NULL.
* @callback: A #GAsyncReadyCallback to call when the request is satisfied.
* @user_data: User data to pass to @callback.
*
* Like control_proxy_new() but takes a #GBusType instead of a #GDBusConnection.
*
* When the operation is finished, @callback will be invoked in the <link linkend="g-main-context-push-thread-default">thread-default main loop</link> of the thread you are calling this method from.
* You can then call control_proxy_new_for_bus_finish() to get the result of the operation.
*
* See control_proxy_new_for_bus_sync() for the synchronous, blocking version of this constructor.
*/
void
control_proxy_new_for_bus (
GBusType bus_type,
GDBusProxyFlags flags,
const gchar *name,
const gchar *object_path,
GCancellable *cancellable,
GAsyncReadyCallback callback,
gpointer user_data)
{
g_async_initable_new_async (TYPE_CONTROL_PROXY, G_PRIORITY_DEFAULT, cancellable, callback, user_data, "g-flags", flags, "g-name", name, "g-bus-type", bus_type, "g-object-path", object_path, "g-interface-name", "org.openbmc.Control", NULL);
}
/**
* control_proxy_new_for_bus_finish:
* @res: The #GAsyncResult obtained from the #GAsyncReadyCallback passed to control_proxy_new_for_bus().
* @error: Return location for error or %NULL
*
* Finishes an operation started with control_proxy_new_for_bus().
*
* Returns: (transfer full) (type ControlProxy): The constructed proxy object or %NULL if @error is set.
*/
Control *
control_proxy_new_for_bus_finish (
GAsyncResult *res,
GError **error)
{
GObject *ret;
GObject *source_object;
source_object = g_async_result_get_source_object (res);
ret = g_async_initable_new_finish (G_ASYNC_INITABLE (source_object), res, error);
g_object_unref (source_object);
if (ret != NULL)
return CONTROL (ret);
else
return NULL;
}
/**
* control_proxy_new_for_bus_sync:
* @bus_type: A #GBusType.
* @flags: Flags from the #GDBusProxyFlags enumeration.
* @name: A bus name (well-known or unique).
* @object_path: An object path.
* @cancellable: (allow-none): A #GCancellable or %NULL.
* @error: Return location for error or %NULL
*
* Like control_proxy_new_sync() but takes a #GBusType instead of a #GDBusConnection.
*
* The calling thread is blocked until a reply is received.
*
* See control_proxy_new_for_bus() for the asynchronous version of this constructor.
*
* Returns: (transfer full) (type ControlProxy): The constructed proxy object or %NULL if @error is set.
*/
Control *
control_proxy_new_for_bus_sync (
GBusType bus_type,
GDBusProxyFlags flags,
const gchar *name,
const gchar *object_path,
GCancellable *cancellable,
GError **error)
{
GInitable *ret;
ret = g_initable_new (TYPE_CONTROL_PROXY, cancellable, error, "g-flags", flags, "g-name", name, "g-bus-type", bus_type, "g-object-path", object_path, "g-interface-name", "org.openbmc.Control", NULL);
if (ret != NULL)
return CONTROL (ret);
else
return NULL;
}
/* ------------------------------------------------------------------------ */
/**
* ControlSkeleton:
*
* The #ControlSkeleton structure contains only private data and should only be accessed using the provided API.
*/
/**
* ControlSkeletonClass:
* @parent_class: The parent class.
*
* Class structure for #ControlSkeleton.
*/
struct _ControlSkeletonPrivate
{
GValue *properties;
GList *changed_properties;
GSource *changed_properties_idle_source;
GMainContext *context;
GMutex lock;
};
static void
_control_skeleton_handle_method_call (
GDBusConnection *connection G_GNUC_UNUSED,
const gchar *sender G_GNUC_UNUSED,
const gchar *object_path G_GNUC_UNUSED,
const gchar *interface_name,
const gchar *method_name,
GVariant *parameters,
GDBusMethodInvocation *invocation,
gpointer user_data)
{
ControlSkeleton *skeleton = CONTROL_SKELETON (user_data);
_ExtendedGDBusMethodInfo *info;
GVariantIter iter;
GVariant *child;
GValue *paramv;
guint num_params;
guint num_extra;
guint n;
guint signal_id;
GValue return_value = G_VALUE_INIT;
info = (_ExtendedGDBusMethodInfo *) g_dbus_method_invocation_get_method_info (invocation);
g_assert (info != NULL);
num_params = g_variant_n_children (parameters);
num_extra = info->pass_fdlist ? 3 : 2; paramv = g_new0 (GValue, num_params + num_extra);
n = 0;
g_value_init (&paramv[n], TYPE_CONTROL);
g_value_set_object (&paramv[n++], skeleton);
g_value_init (&paramv[n], G_TYPE_DBUS_METHOD_INVOCATION);
g_value_set_object (&paramv[n++], invocation);
if (info->pass_fdlist)
{
#ifdef G_OS_UNIX
g_value_init (&paramv[n], G_TYPE_UNIX_FD_LIST);
g_value_set_object (&paramv[n++], g_dbus_message_get_unix_fd_list (g_dbus_method_invocation_get_message (invocation)));
#else
g_assert_not_reached ();
#endif
}
g_variant_iter_init (&iter, parameters);
while ((child = g_variant_iter_next_value (&iter)) != NULL)
{
_ExtendedGDBusArgInfo *arg_info = (_ExtendedGDBusArgInfo *) info->parent_struct.in_args[n - num_extra];
if (arg_info->use_gvariant)
{
g_value_init (&paramv[n], G_TYPE_VARIANT);
g_value_set_variant (&paramv[n], child);
n++;
}
else
g_dbus_gvariant_to_gvalue (child, &paramv[n++]);
g_variant_unref (child);
}
signal_id = g_signal_lookup (info->signal_name, TYPE_CONTROL);
g_value_init (&return_value, G_TYPE_BOOLEAN);
g_signal_emitv (paramv, signal_id, 0, &return_value);
if (!g_value_get_boolean (&return_value))
g_dbus_method_invocation_return_error (invocation, G_DBUS_ERROR, G_DBUS_ERROR_UNKNOWN_METHOD, "Method %s is not implemented on interface %s", method_name, interface_name);
g_value_unset (&return_value);
for (n = 0; n < num_params + num_extra; n++)
g_value_unset (&paramv[n]);
g_free (paramv);
}
static GVariant *
_control_skeleton_handle_get_property (
GDBusConnection *connection G_GNUC_UNUSED,
const gchar *sender G_GNUC_UNUSED,
const gchar *object_path G_GNUC_UNUSED,
const gchar *interface_name G_GNUC_UNUSED,
const gchar *property_name,
GError **error,
gpointer user_data)
{
ControlSkeleton *skeleton = CONTROL_SKELETON (user_data);
GValue value = G_VALUE_INIT;
GParamSpec *pspec;
_ExtendedGDBusPropertyInfo *info;
GVariant *ret;
ret = NULL;
info = (_ExtendedGDBusPropertyInfo *) g_dbus_interface_info_lookup_property ((GDBusInterfaceInfo *) &_control_interface_info.parent_struct, property_name);
g_assert (info != NULL);
pspec = g_object_class_find_property (G_OBJECT_GET_CLASS (skeleton), info->hyphen_name);
if (pspec == NULL)
{
g_set_error (error, G_DBUS_ERROR, G_DBUS_ERROR_INVALID_ARGS, "No property with name %s", property_name);
}
else
{
g_value_init (&value, pspec->value_type);
g_object_get_property (G_OBJECT (skeleton), info->hyphen_name, &value);
ret = g_dbus_gvalue_to_gvariant (&value, G_VARIANT_TYPE (info->parent_struct.signature));
g_value_unset (&value);
}
return ret;
}
static gboolean
_control_skeleton_handle_set_property (
GDBusConnection *connection G_GNUC_UNUSED,
const gchar *sender G_GNUC_UNUSED,
const gchar *object_path G_GNUC_UNUSED,
const gchar *interface_name G_GNUC_UNUSED,
const gchar *property_name,
GVariant *variant,
GError **error,
gpointer user_data)
{
ControlSkeleton *skeleton = CONTROL_SKELETON (user_data);
GValue value = G_VALUE_INIT;
GParamSpec *pspec;
_ExtendedGDBusPropertyInfo *info;
gboolean ret;
ret = FALSE;
info = (_ExtendedGDBusPropertyInfo *) g_dbus_interface_info_lookup_property ((GDBusInterfaceInfo *) &_control_interface_info.parent_struct, property_name);
g_assert (info != NULL);
pspec = g_object_class_find_property (G_OBJECT_GET_CLASS (skeleton), info->hyphen_name);
if (pspec == NULL)
{
g_set_error (error, G_DBUS_ERROR, G_DBUS_ERROR_INVALID_ARGS, "No property with name %s", property_name);
}
else
{
if (info->use_gvariant)
g_value_set_variant (&value, variant);
else
g_dbus_gvariant_to_gvalue (variant, &value);
g_object_set_property (G_OBJECT (skeleton), info->hyphen_name, &value);
g_value_unset (&value);
ret = TRUE;
}
return ret;
}
static const GDBusInterfaceVTable _control_skeleton_vtable =
{
_control_skeleton_handle_method_call,
_control_skeleton_handle_get_property,
_control_skeleton_handle_set_property,
{NULL}
};
static GDBusInterfaceInfo *
control_skeleton_dbus_interface_get_info (GDBusInterfaceSkeleton *skeleton G_GNUC_UNUSED)
{
return control_interface_info ();
}
static GDBusInterfaceVTable *
control_skeleton_dbus_interface_get_vtable (GDBusInterfaceSkeleton *skeleton G_GNUC_UNUSED)
{
return (GDBusInterfaceVTable *) &_control_skeleton_vtable;
}
static GVariant *
control_skeleton_dbus_interface_get_properties (GDBusInterfaceSkeleton *_skeleton)
{
ControlSkeleton *skeleton = CONTROL_SKELETON (_skeleton);
GVariantBuilder builder;
guint n;
g_variant_builder_init (&builder, G_VARIANT_TYPE ("a{sv}"));
if (_control_interface_info.parent_struct.properties == NULL)
goto out;
for (n = 0; _control_interface_info.parent_struct.properties[n] != NULL; n++)
{
GDBusPropertyInfo *info = _control_interface_info.parent_struct.properties[n];
if (info->flags & G_DBUS_PROPERTY_INFO_FLAGS_READABLE)
{
GVariant *value;
value = _control_skeleton_handle_get_property (g_dbus_interface_skeleton_get_connection (G_DBUS_INTERFACE_SKELETON (skeleton)), NULL, g_dbus_interface_skeleton_get_object_path (G_DBUS_INTERFACE_SKELETON (skeleton)), "org.openbmc.Control", info->name, NULL, skeleton);
if (value != NULL)
{
g_variant_take_ref (value);
g_variant_builder_add (&builder, "{sv}", info->name, value);
g_variant_unref (value);
}
}
}
out:
return g_variant_builder_end (&builder);
}
static gboolean _control_emit_changed (gpointer user_data);
static void
control_skeleton_dbus_interface_flush (GDBusInterfaceSkeleton *_skeleton)
{
ControlSkeleton *skeleton = CONTROL_SKELETON (_skeleton);
gboolean emit_changed = FALSE;
g_mutex_lock (&skeleton->priv->lock);
if (skeleton->priv->changed_properties_idle_source != NULL)
{
g_source_destroy (skeleton->priv->changed_properties_idle_source);
skeleton->priv->changed_properties_idle_source = NULL;
emit_changed = TRUE;
}
g_mutex_unlock (&skeleton->priv->lock);
if (emit_changed)
_control_emit_changed (skeleton);
}
static void
_control_on_signal_heartbeat (
Control *object,
const gchar *arg_bus_name)
{
ControlSkeleton *skeleton = CONTROL_SKELETON (object);
GList *connections, *l;
GVariant *signal_variant;
connections = g_dbus_interface_skeleton_get_connections (G_DBUS_INTERFACE_SKELETON (skeleton));
signal_variant = g_variant_ref_sink (g_variant_new ("(s)",
arg_bus_name));
for (l = connections; l != NULL; l = l->next)
{
GDBusConnection *connection = l->data;
g_dbus_connection_emit_signal (connection,
NULL, g_dbus_interface_skeleton_get_object_path (G_DBUS_INTERFACE_SKELETON (skeleton)), "org.openbmc.Control", "Heartbeat",
signal_variant, NULL);
}
g_variant_unref (signal_variant);
g_list_free_full (connections, g_object_unref);
}
static void control_skeleton_iface_init (ControlIface *iface);
#if GLIB_VERSION_MAX_ALLOWED >= GLIB_VERSION_2_38
G_DEFINE_TYPE_WITH_CODE (ControlSkeleton, control_skeleton, G_TYPE_DBUS_INTERFACE_SKELETON,
G_ADD_PRIVATE (ControlSkeleton)
G_IMPLEMENT_INTERFACE (TYPE_CONTROL, control_skeleton_iface_init));
#else
G_DEFINE_TYPE_WITH_CODE (ControlSkeleton, control_skeleton, G_TYPE_DBUS_INTERFACE_SKELETON,
G_IMPLEMENT_INTERFACE (TYPE_CONTROL, control_skeleton_iface_init));
#endif
static void
control_skeleton_finalize (GObject *object)
{
ControlSkeleton *skeleton = CONTROL_SKELETON (object);
guint n;
for (n = 0; n < 2; n++)
g_value_unset (&skeleton->priv->properties[n]);
g_free (skeleton->priv->properties);
g_list_free_full (skeleton->priv->changed_properties, (GDestroyNotify) _changed_property_free);
if (skeleton->priv->changed_properties_idle_source != NULL)
g_source_destroy (skeleton->priv->changed_properties_idle_source);
g_main_context_unref (skeleton->priv->context);
g_mutex_clear (&skeleton->priv->lock);
G_OBJECT_CLASS (control_skeleton_parent_class)->finalize (object);
}
static void
control_skeleton_get_property (GObject *object,
guint prop_id,
GValue *value,
GParamSpec *pspec G_GNUC_UNUSED)
{
ControlSkeleton *skeleton = CONTROL_SKELETON (object);
g_assert (prop_id != 0 && prop_id - 1 < 2);
g_mutex_lock (&skeleton->priv->lock);
g_value_copy (&skeleton->priv->properties[prop_id - 1], value);
g_mutex_unlock (&skeleton->priv->lock);
}
static gboolean
_control_emit_changed (gpointer user_data)
{
ControlSkeleton *skeleton = CONTROL_SKELETON (user_data);
GList *l;
GVariantBuilder builder;
GVariantBuilder invalidated_builder;
guint num_changes;
g_mutex_lock (&skeleton->priv->lock);
g_variant_builder_init (&builder, G_VARIANT_TYPE ("a{sv}"));
g_variant_builder_init (&invalidated_builder, G_VARIANT_TYPE ("as"));
for (l = skeleton->priv->changed_properties, num_changes = 0; l != NULL; l = l->next)
{
ChangedProperty *cp = l->data;
GVariant *variant;
const GValue *cur_value;
cur_value = &skeleton->priv->properties[cp->prop_id - 1];
if (!_g_value_equal (cur_value, &cp->orig_value))
{
variant = g_dbus_gvalue_to_gvariant (cur_value, G_VARIANT_TYPE (cp->info->parent_struct.signature));
g_variant_builder_add (&builder, "{sv}", cp->info->parent_struct.name, variant);
g_variant_unref (variant);
num_changes++;
}
}
if (num_changes > 0)
{
GList *connections, *ll;
GVariant *signal_variant;
signal_variant = g_variant_ref_sink (g_variant_new ("(sa{sv}as)", "org.openbmc.Control",
&builder, &invalidated_builder));
connections = g_dbus_interface_skeleton_get_connections (G_DBUS_INTERFACE_SKELETON (skeleton));
for (ll = connections; ll != NULL; ll = ll->next)
{
GDBusConnection *connection = ll->data;
g_dbus_connection_emit_signal (connection,
NULL, g_dbus_interface_skeleton_get_object_path (G_DBUS_INTERFACE_SKELETON (skeleton)),
"org.freedesktop.DBus.Properties",
"PropertiesChanged",
signal_variant,
NULL);
}
g_variant_unref (signal_variant);
g_list_free_full (connections, g_object_unref);
}
else
{
g_variant_builder_clear (&builder);
g_variant_builder_clear (&invalidated_builder);
}
g_list_free_full (skeleton->priv->changed_properties, (GDestroyNotify) _changed_property_free);
skeleton->priv->changed_properties = NULL;
skeleton->priv->changed_properties_idle_source = NULL;
g_mutex_unlock (&skeleton->priv->lock);
return FALSE;
}
static void
_control_schedule_emit_changed (ControlSkeleton *skeleton, const _ExtendedGDBusPropertyInfo *info, guint prop_id, const GValue *orig_value)
{
ChangedProperty *cp;
GList *l;
cp = NULL;
for (l = skeleton->priv->changed_properties; l != NULL; l = l->next)
{
ChangedProperty *i_cp = l->data;
if (i_cp->info == info)
{
cp = i_cp;
break;
}
}
if (cp == NULL)
{
cp = g_new0 (ChangedProperty, 1);
cp->prop_id = prop_id;
cp->info = info;
skeleton->priv->changed_properties = g_list_prepend (skeleton->priv->changed_properties, cp);
g_value_init (&cp->orig_value, G_VALUE_TYPE (orig_value));
g_value_copy (orig_value, &cp->orig_value);
}
}
static void
control_skeleton_notify (GObject *object,
GParamSpec *pspec G_GNUC_UNUSED)
{
ControlSkeleton *skeleton = CONTROL_SKELETON (object);
g_mutex_lock (&skeleton->priv->lock);
if (skeleton->priv->changed_properties != NULL &&
skeleton->priv->changed_properties_idle_source == NULL)
{
skeleton->priv->changed_properties_idle_source = g_idle_source_new ();
g_source_set_priority (skeleton->priv->changed_properties_idle_source, G_PRIORITY_DEFAULT);
g_source_set_callback (skeleton->priv->changed_properties_idle_source, _control_emit_changed, g_object_ref (skeleton), (GDestroyNotify) g_object_unref);
g_source_attach (skeleton->priv->changed_properties_idle_source, skeleton->priv->context);
g_source_unref (skeleton->priv->changed_properties_idle_source);
}
g_mutex_unlock (&skeleton->priv->lock);
}
static void
control_skeleton_set_property (GObject *object,
guint prop_id,
const GValue *value,
GParamSpec *pspec)
{
ControlSkeleton *skeleton = CONTROL_SKELETON (object);
g_assert (prop_id != 0 && prop_id - 1 < 2);
g_mutex_lock (&skeleton->priv->lock);
g_object_freeze_notify (object);
if (!_g_value_equal (value, &skeleton->priv->properties[prop_id - 1]))
{
if (g_dbus_interface_skeleton_get_connection (G_DBUS_INTERFACE_SKELETON (skeleton)) != NULL)
_control_schedule_emit_changed (skeleton, _control_property_info_pointers[prop_id - 1], prop_id, &skeleton->priv->properties[prop_id - 1]);
g_value_copy (value, &skeleton->priv->properties[prop_id - 1]);
g_object_notify_by_pspec (object, pspec);
}
g_mutex_unlock (&skeleton->priv->lock);
g_object_thaw_notify (object);
}
static void
control_skeleton_init (ControlSkeleton *skeleton)
{
#if GLIB_VERSION_MAX_ALLOWED >= GLIB_VERSION_2_38
skeleton->priv = control_skeleton_get_instance_private (skeleton);
#else
skeleton->priv = G_TYPE_INSTANCE_GET_PRIVATE (skeleton, TYPE_CONTROL_SKELETON, ControlSkeletonPrivate);
#endif
g_mutex_init (&skeleton->priv->lock);
skeleton->priv->context = g_main_context_ref_thread_default ();
skeleton->priv->properties = g_new0 (GValue, 2);
g_value_init (&skeleton->priv->properties[0], G_TYPE_INT);
g_value_init (&skeleton->priv->properties[1], G_TYPE_INT);
}
static gint
control_skeleton_get_poll_interval (Control *object)
{
ControlSkeleton *skeleton = CONTROL_SKELETON (object);
gint value;
g_mutex_lock (&skeleton->priv->lock);
value = g_value_get_int (&(skeleton->priv->properties[0]));
g_mutex_unlock (&skeleton->priv->lock);
return value;
}
static gint
control_skeleton_get_heatbeat (Control *object)
{
ControlSkeleton *skeleton = CONTROL_SKELETON (object);
gint value;
g_mutex_lock (&skeleton->priv->lock);
value = g_value_get_int (&(skeleton->priv->properties[1]));
g_mutex_unlock (&skeleton->priv->lock);
return value;
}
static void
control_skeleton_class_init (ControlSkeletonClass *klass)
{
GObjectClass *gobject_class;
GDBusInterfaceSkeletonClass *skeleton_class;
gobject_class = G_OBJECT_CLASS (klass);
gobject_class->finalize = control_skeleton_finalize;
gobject_class->get_property = control_skeleton_get_property;
gobject_class->set_property = control_skeleton_set_property;
gobject_class->notify = control_skeleton_notify;
control_override_properties (gobject_class, 1);
skeleton_class = G_DBUS_INTERFACE_SKELETON_CLASS (klass);
skeleton_class->get_info = control_skeleton_dbus_interface_get_info;
skeleton_class->get_properties = control_skeleton_dbus_interface_get_properties;
skeleton_class->flush = control_skeleton_dbus_interface_flush;
skeleton_class->get_vtable = control_skeleton_dbus_interface_get_vtable;
#if GLIB_VERSION_MAX_ALLOWED < GLIB_VERSION_2_38
g_type_class_add_private (klass, sizeof (ControlSkeletonPrivate));
#endif
}
static void
control_skeleton_iface_init (ControlIface *iface)
{
iface->heartbeat = _control_on_signal_heartbeat;
iface->get_poll_interval = control_skeleton_get_poll_interval;
iface->get_heatbeat = control_skeleton_get_heatbeat;
}
/**
* control_skeleton_new:
*
* Creates a skeleton object for the D-Bus interface <link linkend="gdbus-interface-org-openbmc-Control.top_of_page">org.openbmc.Control</link>.
*
* Returns: (transfer full) (type ControlSkeleton): The skeleton object.
*/
Control *
control_skeleton_new (void)
{
return CONTROL (g_object_new (TYPE_CONTROL_SKELETON, NULL));
}
/* ------------------------------------------------------------------------
* Code for interface org.openbmc.control.Host
* ------------------------------------------------------------------------
*/
/**
* SECTION:ControlHost
* @title: ControlHost
* @short_description: Generated C code for the org.openbmc.control.Host D-Bus interface
*
* This section contains code for working with the <link linkend="gdbus-interface-org-openbmc-control-Host.top_of_page">org.openbmc.control.Host</link> D-Bus interface in C.
*/
/* ---- Introspection data for org.openbmc.control.Host ---- */
static const _ExtendedGDBusMethodInfo _control_host_method_info_boot =
{
{
-1,
(gchar *) "boot",
NULL,
NULL,
NULL
},
"handle-boot",
FALSE
};
static const _ExtendedGDBusMethodInfo _control_host_method_info_shutdown =
{
{
-1,
(gchar *) "shutdown",
NULL,
NULL,
NULL
},
"handle-shutdown",
FALSE
};
static const _ExtendedGDBusMethodInfo _control_host_method_info_reboot =
{
{
-1,
(gchar *) "reboot",
NULL,
NULL,
NULL
},
"handle-reboot",
FALSE
};
static const _ExtendedGDBusMethodInfo * const _control_host_method_info_pointers[] =
{
&_control_host_method_info_boot,
&_control_host_method_info_shutdown,
&_control_host_method_info_reboot,
NULL
};
static const _ExtendedGDBusSignalInfo _control_host_signal_info_booted =
{
{
-1,
(gchar *) "Booted",
NULL,
NULL
},
"booted"
};
static const _ExtendedGDBusSignalInfo * const _control_host_signal_info_pointers[] =
{
&_control_host_signal_info_booted,
NULL
};
static const _ExtendedGDBusInterfaceInfo _control_host_interface_info =
{
{
-1,
(gchar *) "org.openbmc.control.Host",
(GDBusMethodInfo **) &_control_host_method_info_pointers,
(GDBusSignalInfo **) &_control_host_signal_info_pointers,
NULL,
NULL
},
"control-host",
};
/**
* control_host_interface_info:
*
* Gets a machine-readable description of the <link linkend="gdbus-interface-org-openbmc-control-Host.top_of_page">org.openbmc.control.Host</link> D-Bus interface.
*
* Returns: (transfer none): A #GDBusInterfaceInfo. Do not free.
*/
GDBusInterfaceInfo *
control_host_interface_info (void)
{
return (GDBusInterfaceInfo *) &_control_host_interface_info.parent_struct;
}
/**
* control_host_override_properties:
* @klass: The class structure for a #GObject<!-- -->-derived class.
* @property_id_begin: The property id to assign to the first overridden property.
*
* Overrides all #GObject properties in the #ControlHost interface for a concrete class.
* The properties are overridden in the order they are defined.
*
* Returns: The last property id.
*/
guint
control_host_override_properties (GObjectClass *klass, guint property_id_begin)
{
return property_id_begin - 1;
}
/**
* ControlHost:
*
* Abstract interface type for the D-Bus interface <link linkend="gdbus-interface-org-openbmc-control-Host.top_of_page">org.openbmc.control.Host</link>.
*/
/**
* ControlHostIface:
* @parent_iface: The parent interface.
* @handle_boot: Handler for the #ControlHost::handle-boot signal.
* @handle_reboot: Handler for the #ControlHost::handle-reboot signal.
* @handle_shutdown: Handler for the #ControlHost::handle-shutdown signal.
* @booted: Handler for the #ControlHost::booted signal.
*
* Virtual table for the D-Bus interface <link linkend="gdbus-interface-org-openbmc-control-Host.top_of_page">org.openbmc.control.Host</link>.
*/
typedef ControlHostIface ControlHostInterface;
G_DEFINE_INTERFACE (ControlHost, control_host, G_TYPE_OBJECT);
static void
control_host_default_init (ControlHostIface *iface)
{
/* GObject signals for incoming D-Bus method calls: */
/**
* ControlHost::handle-boot:
* @object: A #ControlHost.
* @invocation: A #GDBusMethodInvocation.
*
* Signal emitted when a remote caller is invoking the <link linkend="gdbus-method-org-openbmc-control-Host.boot">boot()</link> D-Bus method.
*
* If a signal handler returns %TRUE, it means the signal handler will handle the invocation (e.g. take a reference to @invocation and eventually call control_host_complete_boot() or e.g. g_dbus_method_invocation_return_error() on it) and no order signal handlers will run. If no signal handler handles the invocation, the %G_DBUS_ERROR_UNKNOWN_METHOD error is returned.
*
* Returns: %TRUE if the invocation was handled, %FALSE to let other signal handlers run.
*/
g_signal_new ("handle-boot",
G_TYPE_FROM_INTERFACE (iface),
G_SIGNAL_RUN_LAST,
G_STRUCT_OFFSET (ControlHostIface, handle_boot),
g_signal_accumulator_true_handled,
NULL,
g_cclosure_marshal_generic,
G_TYPE_BOOLEAN,
1,
G_TYPE_DBUS_METHOD_INVOCATION);
/**
* ControlHost::handle-shutdown:
* @object: A #ControlHost.
* @invocation: A #GDBusMethodInvocation.
*
* Signal emitted when a remote caller is invoking the <link linkend="gdbus-method-org-openbmc-control-Host.shutdown">shutdown()</link> D-Bus method.
*
* If a signal handler returns %TRUE, it means the signal handler will handle the invocation (e.g. take a reference to @invocation and eventually call control_host_complete_shutdown() or e.g. g_dbus_method_invocation_return_error() on it) and no order signal handlers will run. If no signal handler handles the invocation, the %G_DBUS_ERROR_UNKNOWN_METHOD error is returned.
*
* Returns: %TRUE if the invocation was handled, %FALSE to let other signal handlers run.
*/
g_signal_new ("handle-shutdown",
G_TYPE_FROM_INTERFACE (iface),
G_SIGNAL_RUN_LAST,
G_STRUCT_OFFSET (ControlHostIface, handle_shutdown),
g_signal_accumulator_true_handled,
NULL,
g_cclosure_marshal_generic,
G_TYPE_BOOLEAN,
1,
G_TYPE_DBUS_METHOD_INVOCATION);
/**
* ControlHost::handle-reboot:
* @object: A #ControlHost.
* @invocation: A #GDBusMethodInvocation.
*
* Signal emitted when a remote caller is invoking the <link linkend="gdbus-method-org-openbmc-control-Host.reboot">reboot()</link> D-Bus method.
*
* If a signal handler returns %TRUE, it means the signal handler will handle the invocation (e.g. take a reference to @invocation and eventually call control_host_complete_reboot() or e.g. g_dbus_method_invocation_return_error() on it) and no order signal handlers will run. If no signal handler handles the invocation, the %G_DBUS_ERROR_UNKNOWN_METHOD error is returned.
*
* Returns: %TRUE if the invocation was handled, %FALSE to let other signal handlers run.
*/
g_signal_new ("handle-reboot",
G_TYPE_FROM_INTERFACE (iface),
G_SIGNAL_RUN_LAST,
G_STRUCT_OFFSET (ControlHostIface, handle_reboot),
g_signal_accumulator_true_handled,
NULL,
g_cclosure_marshal_generic,
G_TYPE_BOOLEAN,
1,
G_TYPE_DBUS_METHOD_INVOCATION);
/* GObject signals for received D-Bus signals: */
/**
* ControlHost::booted:
* @object: A #ControlHost.
*
* On the client-side, this signal is emitted whenever the D-Bus signal <link linkend="gdbus-signal-org-openbmc-control-Host.Booted">"Booted"</link> is received.
*
* On the service-side, this signal can be used with e.g. g_signal_emit_by_name() to make the object emit the D-Bus signal.
*/
g_signal_new ("booted",
G_TYPE_FROM_INTERFACE (iface),
G_SIGNAL_RUN_LAST,
G_STRUCT_OFFSET (ControlHostIface, booted),
NULL,
NULL,
g_cclosure_marshal_generic,
G_TYPE_NONE,
0);
}
/**
* control_host_emit_booted:
* @object: A #ControlHost.
*
* Emits the <link linkend="gdbus-signal-org-openbmc-control-Host.Booted">"Booted"</link> D-Bus signal.
*/
void
control_host_emit_booted (
ControlHost *object)
{
g_signal_emit_by_name (object, "booted");
}
/**
* control_host_call_boot:
* @proxy: A #ControlHostProxy.
* @cancellable: (allow-none): A #GCancellable or %NULL.
* @callback: A #GAsyncReadyCallback to call when the request is satisfied or %NULL.
* @user_data: User data to pass to @callback.
*
* Asynchronously invokes the <link linkend="gdbus-method-org-openbmc-control-Host.boot">boot()</link> D-Bus method on @proxy.
* When the operation is finished, @callback will be invoked in the <link linkend="g-main-context-push-thread-default">thread-default main loop</link> of the thread you are calling this method from.
* You can then call control_host_call_boot_finish() to get the result of the operation.
*
* See control_host_call_boot_sync() for the synchronous, blocking version of this method.
*/
void
control_host_call_boot (
ControlHost *proxy,
GCancellable *cancellable,
GAsyncReadyCallback callback,
gpointer user_data)
{
g_dbus_proxy_call (G_DBUS_PROXY (proxy),
"boot",
g_variant_new ("()"),
G_DBUS_CALL_FLAGS_NONE,
-1,
cancellable,
callback,
user_data);
}
/**
* control_host_call_boot_finish:
* @proxy: A #ControlHostProxy.
* @res: The #GAsyncResult obtained from the #GAsyncReadyCallback passed to control_host_call_boot().
* @error: Return location for error or %NULL.
*
* Finishes an operation started with control_host_call_boot().
*
* Returns: (skip): %TRUE if the call succeded, %FALSE if @error is set.
*/
gboolean
control_host_call_boot_finish (
ControlHost *proxy,
GAsyncResult *res,
GError **error)
{
GVariant *_ret;
_ret = g_dbus_proxy_call_finish (G_DBUS_PROXY (proxy), res, error);
if (_ret == NULL)
goto _out;
g_variant_get (_ret,
"()");
g_variant_unref (_ret);
_out:
return _ret != NULL;
}
/**
* control_host_call_boot_sync:
* @proxy: A #ControlHostProxy.
* @cancellable: (allow-none): A #GCancellable or %NULL.
* @error: Return location for error or %NULL.
*
* Synchronously invokes the <link linkend="gdbus-method-org-openbmc-control-Host.boot">boot()</link> D-Bus method on @proxy. The calling thread is blocked until a reply is received.
*
* See control_host_call_boot() for the asynchronous version of this method.
*
* Returns: (skip): %TRUE if the call succeded, %FALSE if @error is set.
*/
gboolean
control_host_call_boot_sync (
ControlHost *proxy,
GCancellable *cancellable,
GError **error)
{
GVariant *_ret;
_ret = g_dbus_proxy_call_sync (G_DBUS_PROXY (proxy),
"boot",
g_variant_new ("()"),
G_DBUS_CALL_FLAGS_NONE,
-1,
cancellable,
error);
if (_ret == NULL)
goto _out;
g_variant_get (_ret,
"()");
g_variant_unref (_ret);
_out:
return _ret != NULL;
}
/**
* control_host_call_shutdown:
* @proxy: A #ControlHostProxy.
* @cancellable: (allow-none): A #GCancellable or %NULL.
* @callback: A #GAsyncReadyCallback to call when the request is satisfied or %NULL.
* @user_data: User data to pass to @callback.
*
* Asynchronously invokes the <link linkend="gdbus-method-org-openbmc-control-Host.shutdown">shutdown()</link> D-Bus method on @proxy.
* When the operation is finished, @callback will be invoked in the <link linkend="g-main-context-push-thread-default">thread-default main loop</link> of the thread you are calling this method from.
* You can then call control_host_call_shutdown_finish() to get the result of the operation.
*
* See control_host_call_shutdown_sync() for the synchronous, blocking version of this method.
*/
void
control_host_call_shutdown (
ControlHost *proxy,
GCancellable *cancellable,
GAsyncReadyCallback callback,
gpointer user_data)
{
g_dbus_proxy_call (G_DBUS_PROXY (proxy),
"shutdown",
g_variant_new ("()"),
G_DBUS_CALL_FLAGS_NONE,
-1,
cancellable,
callback,
user_data);
}
/**
* control_host_call_shutdown_finish:
* @proxy: A #ControlHostProxy.
* @res: The #GAsyncResult obtained from the #GAsyncReadyCallback passed to control_host_call_shutdown().
* @error: Return location for error or %NULL.
*
* Finishes an operation started with control_host_call_shutdown().
*
* Returns: (skip): %TRUE if the call succeded, %FALSE if @error is set.
*/
gboolean
control_host_call_shutdown_finish (
ControlHost *proxy,
GAsyncResult *res,
GError **error)
{
GVariant *_ret;
_ret = g_dbus_proxy_call_finish (G_DBUS_PROXY (proxy), res, error);
if (_ret == NULL)
goto _out;
g_variant_get (_ret,
"()");
g_variant_unref (_ret);
_out:
return _ret != NULL;
}
/**
* control_host_call_shutdown_sync:
* @proxy: A #ControlHostProxy.
* @cancellable: (allow-none): A #GCancellable or %NULL.
* @error: Return location for error or %NULL.
*
* Synchronously invokes the <link linkend="gdbus-method-org-openbmc-control-Host.shutdown">shutdown()</link> D-Bus method on @proxy. The calling thread is blocked until a reply is received.
*
* See control_host_call_shutdown() for the asynchronous version of this method.
*
* Returns: (skip): %TRUE if the call succeded, %FALSE if @error is set.
*/
gboolean
control_host_call_shutdown_sync (
ControlHost *proxy,
GCancellable *cancellable,
GError **error)
{
GVariant *_ret;
_ret = g_dbus_proxy_call_sync (G_DBUS_PROXY (proxy),
"shutdown",
g_variant_new ("()"),
G_DBUS_CALL_FLAGS_NONE,
-1,
cancellable,
error);
if (_ret == NULL)
goto _out;
g_variant_get (_ret,
"()");
g_variant_unref (_ret);
_out:
return _ret != NULL;
}
/**
* control_host_call_reboot:
* @proxy: A #ControlHostProxy.
* @cancellable: (allow-none): A #GCancellable or %NULL.
* @callback: A #GAsyncReadyCallback to call when the request is satisfied or %NULL.
* @user_data: User data to pass to @callback.
*
* Asynchronously invokes the <link linkend="gdbus-method-org-openbmc-control-Host.reboot">reboot()</link> D-Bus method on @proxy.
* When the operation is finished, @callback will be invoked in the <link linkend="g-main-context-push-thread-default">thread-default main loop</link> of the thread you are calling this method from.
* You can then call control_host_call_reboot_finish() to get the result of the operation.
*
* See control_host_call_reboot_sync() for the synchronous, blocking version of this method.
*/
void
control_host_call_reboot (
ControlHost *proxy,
GCancellable *cancellable,
GAsyncReadyCallback callback,
gpointer user_data)
{
g_dbus_proxy_call (G_DBUS_PROXY (proxy),
"reboot",
g_variant_new ("()"),
G_DBUS_CALL_FLAGS_NONE,
-1,
cancellable,
callback,
user_data);
}
/**
* control_host_call_reboot_finish:
* @proxy: A #ControlHostProxy.
* @res: The #GAsyncResult obtained from the #GAsyncReadyCallback passed to control_host_call_reboot().
* @error: Return location for error or %NULL.
*
* Finishes an operation started with control_host_call_reboot().
*
* Returns: (skip): %TRUE if the call succeded, %FALSE if @error is set.
*/
gboolean
control_host_call_reboot_finish (
ControlHost *proxy,
GAsyncResult *res,
GError **error)
{
GVariant *_ret;
_ret = g_dbus_proxy_call_finish (G_DBUS_PROXY (proxy), res, error);
if (_ret == NULL)
goto _out;
g_variant_get (_ret,
"()");
g_variant_unref (_ret);
_out:
return _ret != NULL;
}
/**
* control_host_call_reboot_sync:
* @proxy: A #ControlHostProxy.
* @cancellable: (allow-none): A #GCancellable or %NULL.
* @error: Return location for error or %NULL.
*
* Synchronously invokes the <link linkend="gdbus-method-org-openbmc-control-Host.reboot">reboot()</link> D-Bus method on @proxy. The calling thread is blocked until a reply is received.
*
* See control_host_call_reboot() for the asynchronous version of this method.
*
* Returns: (skip): %TRUE if the call succeded, %FALSE if @error is set.
*/
gboolean
control_host_call_reboot_sync (
ControlHost *proxy,
GCancellable *cancellable,
GError **error)
{
GVariant *_ret;
_ret = g_dbus_proxy_call_sync (G_DBUS_PROXY (proxy),
"reboot",
g_variant_new ("()"),
G_DBUS_CALL_FLAGS_NONE,
-1,
cancellable,
error);
if (_ret == NULL)
goto _out;
g_variant_get (_ret,
"()");
g_variant_unref (_ret);
_out:
return _ret != NULL;
}
/**
* control_host_complete_boot:
* @object: A #ControlHost.
* @invocation: (transfer full): A #GDBusMethodInvocation.
*
* Helper function used in service implementations to finish handling invocations of the <link linkend="gdbus-method-org-openbmc-control-Host.boot">boot()</link> D-Bus method. If you instead want to finish handling an invocation by returning an error, use g_dbus_method_invocation_return_error() or similar.
*
* This method will free @invocation, you cannot use it afterwards.
*/
void
control_host_complete_boot (
ControlHost *object,
GDBusMethodInvocation *invocation)
{
g_dbus_method_invocation_return_value (invocation,
g_variant_new ("()"));
}
/**
* control_host_complete_shutdown:
* @object: A #ControlHost.
* @invocation: (transfer full): A #GDBusMethodInvocation.
*
* Helper function used in service implementations to finish handling invocations of the <link linkend="gdbus-method-org-openbmc-control-Host.shutdown">shutdown()</link> D-Bus method. If you instead want to finish handling an invocation by returning an error, use g_dbus_method_invocation_return_error() or similar.
*
* This method will free @invocation, you cannot use it afterwards.
*/
void
control_host_complete_shutdown (
ControlHost *object,
GDBusMethodInvocation *invocation)
{
g_dbus_method_invocation_return_value (invocation,
g_variant_new ("()"));
}
/**
* control_host_complete_reboot:
* @object: A #ControlHost.
* @invocation: (transfer full): A #GDBusMethodInvocation.
*
* Helper function used in service implementations to finish handling invocations of the <link linkend="gdbus-method-org-openbmc-control-Host.reboot">reboot()</link> D-Bus method. If you instead want to finish handling an invocation by returning an error, use g_dbus_method_invocation_return_error() or similar.
*
* This method will free @invocation, you cannot use it afterwards.
*/
void
control_host_complete_reboot (
ControlHost *object,
GDBusMethodInvocation *invocation)
{
g_dbus_method_invocation_return_value (invocation,
g_variant_new ("()"));
}
/* ------------------------------------------------------------------------ */
/**
* ControlHostProxy:
*
* The #ControlHostProxy structure contains only private data and should only be accessed using the provided API.
*/
/**
* ControlHostProxyClass:
* @parent_class: The parent class.
*
* Class structure for #ControlHostProxy.
*/
struct _ControlHostProxyPrivate
{
GData *qdata;
};
static void control_host_proxy_iface_init (ControlHostIface *iface);
#if GLIB_VERSION_MAX_ALLOWED >= GLIB_VERSION_2_38
G_DEFINE_TYPE_WITH_CODE (ControlHostProxy, control_host_proxy, G_TYPE_DBUS_PROXY,
G_ADD_PRIVATE (ControlHostProxy)
G_IMPLEMENT_INTERFACE (TYPE_CONTROL_HOST, control_host_proxy_iface_init));
#else
G_DEFINE_TYPE_WITH_CODE (ControlHostProxy, control_host_proxy, G_TYPE_DBUS_PROXY,
G_IMPLEMENT_INTERFACE (TYPE_CONTROL_HOST, control_host_proxy_iface_init));
#endif
static void
control_host_proxy_finalize (GObject *object)
{
ControlHostProxy *proxy = CONTROL_HOST_PROXY (object);
g_datalist_clear (&proxy->priv->qdata);
G_OBJECT_CLASS (control_host_proxy_parent_class)->finalize (object);
}
static void
control_host_proxy_get_property (GObject *object,
guint prop_id,
GValue *value,
GParamSpec *pspec G_GNUC_UNUSED)
{
}
static void
control_host_proxy_set_property (GObject *object,
guint prop_id,
const GValue *value,
GParamSpec *pspec G_GNUC_UNUSED)
{
}
static void
control_host_proxy_g_signal (GDBusProxy *proxy,
const gchar *sender_name G_GNUC_UNUSED,
const gchar *signal_name,
GVariant *parameters)
{
_ExtendedGDBusSignalInfo *info;
GVariantIter iter;
GVariant *child;
GValue *paramv;
guint num_params;
guint n;
guint signal_id;
info = (_ExtendedGDBusSignalInfo *) g_dbus_interface_info_lookup_signal ((GDBusInterfaceInfo *) &_control_host_interface_info.parent_struct, signal_name);
if (info == NULL)
return;
num_params = g_variant_n_children (parameters);
paramv = g_new0 (GValue, num_params + 1);
g_value_init (&paramv[0], TYPE_CONTROL_HOST);
g_value_set_object (&paramv[0], proxy);
g_variant_iter_init (&iter, parameters);
n = 1;
while ((child = g_variant_iter_next_value (&iter)) != NULL)
{
_ExtendedGDBusArgInfo *arg_info = (_ExtendedGDBusArgInfo *) info->parent_struct.args[n - 1];
if (arg_info->use_gvariant)
{
g_value_init (&paramv[n], G_TYPE_VARIANT);
g_value_set_variant (&paramv[n], child);
n++;
}
else
g_dbus_gvariant_to_gvalue (child, &paramv[n++]);
g_variant_unref (child);
}
signal_id = g_signal_lookup (info->signal_name, TYPE_CONTROL_HOST);
g_signal_emitv (paramv, signal_id, 0, NULL);
for (n = 0; n < num_params + 1; n++)
g_value_unset (&paramv[n]);
g_free (paramv);
}
static void
control_host_proxy_g_properties_changed (GDBusProxy *_proxy,
GVariant *changed_properties,
const gchar *const *invalidated_properties)
{
ControlHostProxy *proxy = CONTROL_HOST_PROXY (_proxy);
guint n;
const gchar *key;
GVariantIter *iter;
_ExtendedGDBusPropertyInfo *info;
g_variant_get (changed_properties, "a{sv}", &iter);
while (g_variant_iter_next (iter, "{&sv}", &key, NULL))
{
info = (_ExtendedGDBusPropertyInfo *) g_dbus_interface_info_lookup_property ((GDBusInterfaceInfo *) &_control_host_interface_info.parent_struct, key);
g_datalist_remove_data (&proxy->priv->qdata, key);
if (info != NULL)
g_object_notify (G_OBJECT (proxy), info->hyphen_name);
}
g_variant_iter_free (iter);
for (n = 0; invalidated_properties[n] != NULL; n++)
{
info = (_ExtendedGDBusPropertyInfo *) g_dbus_interface_info_lookup_property ((GDBusInterfaceInfo *) &_control_host_interface_info.parent_struct, invalidated_properties[n]);
g_datalist_remove_data (&proxy->priv->qdata, invalidated_properties[n]);
if (info != NULL)
g_object_notify (G_OBJECT (proxy), info->hyphen_name);
}
}
static void
control_host_proxy_init (ControlHostProxy *proxy)
{
#if GLIB_VERSION_MAX_ALLOWED >= GLIB_VERSION_2_38
proxy->priv = control_host_proxy_get_instance_private (proxy);
#else
proxy->priv = G_TYPE_INSTANCE_GET_PRIVATE (proxy, TYPE_CONTROL_HOST_PROXY, ControlHostProxyPrivate);
#endif
g_dbus_proxy_set_interface_info (G_DBUS_PROXY (proxy), control_host_interface_info ());
}
static void
control_host_proxy_class_init (ControlHostProxyClass *klass)
{
GObjectClass *gobject_class;
GDBusProxyClass *proxy_class;
gobject_class = G_OBJECT_CLASS (klass);
gobject_class->finalize = control_host_proxy_finalize;
gobject_class->get_property = control_host_proxy_get_property;
gobject_class->set_property = control_host_proxy_set_property;
proxy_class = G_DBUS_PROXY_CLASS (klass);
proxy_class->g_signal = control_host_proxy_g_signal;
proxy_class->g_properties_changed = control_host_proxy_g_properties_changed;
#if GLIB_VERSION_MAX_ALLOWED < GLIB_VERSION_2_38
g_type_class_add_private (klass, sizeof (ControlHostProxyPrivate));
#endif
}
static void
control_host_proxy_iface_init (ControlHostIface *iface)
{
}
/**
* control_host_proxy_new:
* @connection: A #GDBusConnection.
* @flags: Flags from the #GDBusProxyFlags enumeration.
* @name: (allow-none): A bus name (well-known or unique) or %NULL if @connection is not a message bus connection.
* @object_path: An object path.
* @cancellable: (allow-none): A #GCancellable or %NULL.
* @callback: A #GAsyncReadyCallback to call when the request is satisfied.
* @user_data: User data to pass to @callback.
*
* Asynchronously creates a proxy for the D-Bus interface <link linkend="gdbus-interface-org-openbmc-control-Host.top_of_page">org.openbmc.control.Host</link>. See g_dbus_proxy_new() for more details.
*
* When the operation is finished, @callback will be invoked in the <link linkend="g-main-context-push-thread-default">thread-default main loop</link> of the thread you are calling this method from.
* You can then call control_host_proxy_new_finish() to get the result of the operation.
*
* See control_host_proxy_new_sync() for the synchronous, blocking version of this constructor.
*/
void
control_host_proxy_new (
GDBusConnection *connection,
GDBusProxyFlags flags,
const gchar *name,
const gchar *object_path,
GCancellable *cancellable,
GAsyncReadyCallback callback,
gpointer user_data)
{
g_async_initable_new_async (TYPE_CONTROL_HOST_PROXY, G_PRIORITY_DEFAULT, cancellable, callback, user_data, "g-flags", flags, "g-name", name, "g-connection", connection, "g-object-path", object_path, "g-interface-name", "org.openbmc.control.Host", NULL);
}
/**
* control_host_proxy_new_finish:
* @res: The #GAsyncResult obtained from the #GAsyncReadyCallback passed to control_host_proxy_new().
* @error: Return location for error or %NULL
*
* Finishes an operation started with control_host_proxy_new().
*
* Returns: (transfer full) (type ControlHostProxy): The constructed proxy object or %NULL if @error is set.
*/
ControlHost *
control_host_proxy_new_finish (
GAsyncResult *res,
GError **error)
{
GObject *ret;
GObject *source_object;
source_object = g_async_result_get_source_object (res);
ret = g_async_initable_new_finish (G_ASYNC_INITABLE (source_object), res, error);
g_object_unref (source_object);
if (ret != NULL)
return CONTROL_HOST (ret);
else
return NULL;
}
/**
* control_host_proxy_new_sync:
* @connection: A #GDBusConnection.
* @flags: Flags from the #GDBusProxyFlags enumeration.
* @name: (allow-none): A bus name (well-known or unique) or %NULL if @connection is not a message bus connection.
* @object_path: An object path.
* @cancellable: (allow-none): A #GCancellable or %NULL.
* @error: Return location for error or %NULL
*
* Synchronously creates a proxy for the D-Bus interface <link linkend="gdbus-interface-org-openbmc-control-Host.top_of_page">org.openbmc.control.Host</link>. See g_dbus_proxy_new_sync() for more details.
*
* The calling thread is blocked until a reply is received.
*
* See control_host_proxy_new() for the asynchronous version of this constructor.
*
* Returns: (transfer full) (type ControlHostProxy): The constructed proxy object or %NULL if @error is set.
*/
ControlHost *
control_host_proxy_new_sync (
GDBusConnection *connection,
GDBusProxyFlags flags,
const gchar *name,
const gchar *object_path,
GCancellable *cancellable,
GError **error)
{
GInitable *ret;
ret = g_initable_new (TYPE_CONTROL_HOST_PROXY, cancellable, error, "g-flags", flags, "g-name", name, "g-connection", connection, "g-object-path", object_path, "g-interface-name", "org.openbmc.control.Host", NULL);
if (ret != NULL)
return CONTROL_HOST (ret);
else
return NULL;
}
/**
* control_host_proxy_new_for_bus:
* @bus_type: A #GBusType.
* @flags: Flags from the #GDBusProxyFlags enumeration.
* @name: A bus name (well-known or unique).
* @object_path: An object path.
* @cancellable: (allow-none): A #GCancellable or %NULL.
* @callback: A #GAsyncReadyCallback to call when the request is satisfied.
* @user_data: User data to pass to @callback.
*
* Like control_host_proxy_new() but takes a #GBusType instead of a #GDBusConnection.
*
* When the operation is finished, @callback will be invoked in the <link linkend="g-main-context-push-thread-default">thread-default main loop</link> of the thread you are calling this method from.
* You can then call control_host_proxy_new_for_bus_finish() to get the result of the operation.
*
* See control_host_proxy_new_for_bus_sync() for the synchronous, blocking version of this constructor.
*/
void
control_host_proxy_new_for_bus (
GBusType bus_type,
GDBusProxyFlags flags,
const gchar *name,
const gchar *object_path,
GCancellable *cancellable,
GAsyncReadyCallback callback,
gpointer user_data)
{
g_async_initable_new_async (TYPE_CONTROL_HOST_PROXY, G_PRIORITY_DEFAULT, cancellable, callback, user_data, "g-flags", flags, "g-name", name, "g-bus-type", bus_type, "g-object-path", object_path, "g-interface-name", "org.openbmc.control.Host", NULL);
}
/**
* control_host_proxy_new_for_bus_finish:
* @res: The #GAsyncResult obtained from the #GAsyncReadyCallback passed to control_host_proxy_new_for_bus().
* @error: Return location for error or %NULL
*
* Finishes an operation started with control_host_proxy_new_for_bus().
*
* Returns: (transfer full) (type ControlHostProxy): The constructed proxy object or %NULL if @error is set.
*/
ControlHost *
control_host_proxy_new_for_bus_finish (
GAsyncResult *res,
GError **error)
{
GObject *ret;
GObject *source_object;
source_object = g_async_result_get_source_object (res);
ret = g_async_initable_new_finish (G_ASYNC_INITABLE (source_object), res, error);
g_object_unref (source_object);
if (ret != NULL)
return CONTROL_HOST (ret);
else
return NULL;
}
/**
* control_host_proxy_new_for_bus_sync:
* @bus_type: A #GBusType.
* @flags: Flags from the #GDBusProxyFlags enumeration.
* @name: A bus name (well-known or unique).
* @object_path: An object path.
* @cancellable: (allow-none): A #GCancellable or %NULL.
* @error: Return location for error or %NULL
*
* Like control_host_proxy_new_sync() but takes a #GBusType instead of a #GDBusConnection.
*
* The calling thread is blocked until a reply is received.
*
* See control_host_proxy_new_for_bus() for the asynchronous version of this constructor.
*
* Returns: (transfer full) (type ControlHostProxy): The constructed proxy object or %NULL if @error is set.
*/
ControlHost *
control_host_proxy_new_for_bus_sync (
GBusType bus_type,
GDBusProxyFlags flags,
const gchar *name,
const gchar *object_path,
GCancellable *cancellable,
GError **error)
{
GInitable *ret;
ret = g_initable_new (TYPE_CONTROL_HOST_PROXY, cancellable, error, "g-flags", flags, "g-name", name, "g-bus-type", bus_type, "g-object-path", object_path, "g-interface-name", "org.openbmc.control.Host", NULL);
if (ret != NULL)
return CONTROL_HOST (ret);
else
return NULL;
}
/* ------------------------------------------------------------------------ */
/**
* ControlHostSkeleton:
*
* The #ControlHostSkeleton structure contains only private data and should only be accessed using the provided API.
*/
/**
* ControlHostSkeletonClass:
* @parent_class: The parent class.
*
* Class structure for #ControlHostSkeleton.
*/
struct _ControlHostSkeletonPrivate
{
GValue *properties;
GList *changed_properties;
GSource *changed_properties_idle_source;
GMainContext *context;
GMutex lock;
};
static void
_control_host_skeleton_handle_method_call (
GDBusConnection *connection G_GNUC_UNUSED,
const gchar *sender G_GNUC_UNUSED,
const gchar *object_path G_GNUC_UNUSED,
const gchar *interface_name,
const gchar *method_name,
GVariant *parameters,
GDBusMethodInvocation *invocation,
gpointer user_data)
{
ControlHostSkeleton *skeleton = CONTROL_HOST_SKELETON (user_data);
_ExtendedGDBusMethodInfo *info;
GVariantIter iter;
GVariant *child;
GValue *paramv;
guint num_params;
guint num_extra;
guint n;
guint signal_id;
GValue return_value = G_VALUE_INIT;
info = (_ExtendedGDBusMethodInfo *) g_dbus_method_invocation_get_method_info (invocation);
g_assert (info != NULL);
num_params = g_variant_n_children (parameters);
num_extra = info->pass_fdlist ? 3 : 2; paramv = g_new0 (GValue, num_params + num_extra);
n = 0;
g_value_init (&paramv[n], TYPE_CONTROL_HOST);
g_value_set_object (&paramv[n++], skeleton);
g_value_init (&paramv[n], G_TYPE_DBUS_METHOD_INVOCATION);
g_value_set_object (&paramv[n++], invocation);
if (info->pass_fdlist)
{
#ifdef G_OS_UNIX
g_value_init (&paramv[n], G_TYPE_UNIX_FD_LIST);
g_value_set_object (&paramv[n++], g_dbus_message_get_unix_fd_list (g_dbus_method_invocation_get_message (invocation)));
#else
g_assert_not_reached ();
#endif
}
g_variant_iter_init (&iter, parameters);
while ((child = g_variant_iter_next_value (&iter)) != NULL)
{
_ExtendedGDBusArgInfo *arg_info = (_ExtendedGDBusArgInfo *) info->parent_struct.in_args[n - num_extra];
if (arg_info->use_gvariant)
{
g_value_init (&paramv[n], G_TYPE_VARIANT);
g_value_set_variant (&paramv[n], child);
n++;
}
else
g_dbus_gvariant_to_gvalue (child, &paramv[n++]);
g_variant_unref (child);
}
signal_id = g_signal_lookup (info->signal_name, TYPE_CONTROL_HOST);
g_value_init (&return_value, G_TYPE_BOOLEAN);
g_signal_emitv (paramv, signal_id, 0, &return_value);
if (!g_value_get_boolean (&return_value))
g_dbus_method_invocation_return_error (invocation, G_DBUS_ERROR, G_DBUS_ERROR_UNKNOWN_METHOD, "Method %s is not implemented on interface %s", method_name, interface_name);
g_value_unset (&return_value);
for (n = 0; n < num_params + num_extra; n++)
g_value_unset (&paramv[n]);
g_free (paramv);
}
static GVariant *
_control_host_skeleton_handle_get_property (
GDBusConnection *connection G_GNUC_UNUSED,
const gchar *sender G_GNUC_UNUSED,
const gchar *object_path G_GNUC_UNUSED,
const gchar *interface_name G_GNUC_UNUSED,
const gchar *property_name,
GError **error,
gpointer user_data)
{
ControlHostSkeleton *skeleton = CONTROL_HOST_SKELETON (user_data);
GValue value = G_VALUE_INIT;
GParamSpec *pspec;
_ExtendedGDBusPropertyInfo *info;
GVariant *ret;
ret = NULL;
info = (_ExtendedGDBusPropertyInfo *) g_dbus_interface_info_lookup_property ((GDBusInterfaceInfo *) &_control_host_interface_info.parent_struct, property_name);
g_assert (info != NULL);
pspec = g_object_class_find_property (G_OBJECT_GET_CLASS (skeleton), info->hyphen_name);
if (pspec == NULL)
{
g_set_error (error, G_DBUS_ERROR, G_DBUS_ERROR_INVALID_ARGS, "No property with name %s", property_name);
}
else
{
g_value_init (&value, pspec->value_type);
g_object_get_property (G_OBJECT (skeleton), info->hyphen_name, &value);
ret = g_dbus_gvalue_to_gvariant (&value, G_VARIANT_TYPE (info->parent_struct.signature));
g_value_unset (&value);
}
return ret;
}
static gboolean
_control_host_skeleton_handle_set_property (
GDBusConnection *connection G_GNUC_UNUSED,
const gchar *sender G_GNUC_UNUSED,
const gchar *object_path G_GNUC_UNUSED,
const gchar *interface_name G_GNUC_UNUSED,
const gchar *property_name,
GVariant *variant,
GError **error,
gpointer user_data)
{
ControlHostSkeleton *skeleton = CONTROL_HOST_SKELETON (user_data);
GValue value = G_VALUE_INIT;
GParamSpec *pspec;
_ExtendedGDBusPropertyInfo *info;
gboolean ret;
ret = FALSE;
info = (_ExtendedGDBusPropertyInfo *) g_dbus_interface_info_lookup_property ((GDBusInterfaceInfo *) &_control_host_interface_info.parent_struct, property_name);
g_assert (info != NULL);
pspec = g_object_class_find_property (G_OBJECT_GET_CLASS (skeleton), info->hyphen_name);
if (pspec == NULL)
{
g_set_error (error, G_DBUS_ERROR, G_DBUS_ERROR_INVALID_ARGS, "No property with name %s", property_name);
}
else
{
if (info->use_gvariant)
g_value_set_variant (&value, variant);
else
g_dbus_gvariant_to_gvalue (variant, &value);
g_object_set_property (G_OBJECT (skeleton), info->hyphen_name, &value);
g_value_unset (&value);
ret = TRUE;
}
return ret;
}
static const GDBusInterfaceVTable _control_host_skeleton_vtable =
{
_control_host_skeleton_handle_method_call,
_control_host_skeleton_handle_get_property,
_control_host_skeleton_handle_set_property,
{NULL}
};
static GDBusInterfaceInfo *
control_host_skeleton_dbus_interface_get_info (GDBusInterfaceSkeleton *skeleton G_GNUC_UNUSED)
{
return control_host_interface_info ();
}
static GDBusInterfaceVTable *
control_host_skeleton_dbus_interface_get_vtable (GDBusInterfaceSkeleton *skeleton G_GNUC_UNUSED)
{
return (GDBusInterfaceVTable *) &_control_host_skeleton_vtable;
}
static GVariant *
control_host_skeleton_dbus_interface_get_properties (GDBusInterfaceSkeleton *_skeleton)
{
ControlHostSkeleton *skeleton = CONTROL_HOST_SKELETON (_skeleton);
GVariantBuilder builder;
guint n;
g_variant_builder_init (&builder, G_VARIANT_TYPE ("a{sv}"));
if (_control_host_interface_info.parent_struct.properties == NULL)
goto out;
for (n = 0; _control_host_interface_info.parent_struct.properties[n] != NULL; n++)
{
GDBusPropertyInfo *info = _control_host_interface_info.parent_struct.properties[n];
if (info->flags & G_DBUS_PROPERTY_INFO_FLAGS_READABLE)
{
GVariant *value;
value = _control_host_skeleton_handle_get_property (g_dbus_interface_skeleton_get_connection (G_DBUS_INTERFACE_SKELETON (skeleton)), NULL, g_dbus_interface_skeleton_get_object_path (G_DBUS_INTERFACE_SKELETON (skeleton)), "org.openbmc.control.Host", info->name, NULL, skeleton);
if (value != NULL)
{
g_variant_take_ref (value);
g_variant_builder_add (&builder, "{sv}", info->name, value);
g_variant_unref (value);
}
}
}
out:
return g_variant_builder_end (&builder);
}
static void
control_host_skeleton_dbus_interface_flush (GDBusInterfaceSkeleton *_skeleton)
{
}
static void
_control_host_on_signal_booted (
ControlHost *object)
{
ControlHostSkeleton *skeleton = CONTROL_HOST_SKELETON (object);
GList *connections, *l;
GVariant *signal_variant;
connections = g_dbus_interface_skeleton_get_connections (G_DBUS_INTERFACE_SKELETON (skeleton));
signal_variant = g_variant_ref_sink (g_variant_new ("()"));
for (l = connections; l != NULL; l = l->next)
{
GDBusConnection *connection = l->data;
g_dbus_connection_emit_signal (connection,
NULL, g_dbus_interface_skeleton_get_object_path (G_DBUS_INTERFACE_SKELETON (skeleton)), "org.openbmc.control.Host", "Booted",
signal_variant, NULL);
}
g_variant_unref (signal_variant);
g_list_free_full (connections, g_object_unref);
}
static void control_host_skeleton_iface_init (ControlHostIface *iface);
#if GLIB_VERSION_MAX_ALLOWED >= GLIB_VERSION_2_38
G_DEFINE_TYPE_WITH_CODE (ControlHostSkeleton, control_host_skeleton, G_TYPE_DBUS_INTERFACE_SKELETON,
G_ADD_PRIVATE (ControlHostSkeleton)
G_IMPLEMENT_INTERFACE (TYPE_CONTROL_HOST, control_host_skeleton_iface_init));
#else
G_DEFINE_TYPE_WITH_CODE (ControlHostSkeleton, control_host_skeleton, G_TYPE_DBUS_INTERFACE_SKELETON,
G_IMPLEMENT_INTERFACE (TYPE_CONTROL_HOST, control_host_skeleton_iface_init));
#endif
static void
control_host_skeleton_finalize (GObject *object)
{
ControlHostSkeleton *skeleton = CONTROL_HOST_SKELETON (object);
g_list_free_full (skeleton->priv->changed_properties, (GDestroyNotify) _changed_property_free);
if (skeleton->priv->changed_properties_idle_source != NULL)
g_source_destroy (skeleton->priv->changed_properties_idle_source);
g_main_context_unref (skeleton->priv->context);
g_mutex_clear (&skeleton->priv->lock);
G_OBJECT_CLASS (control_host_skeleton_parent_class)->finalize (object);
}
static void
control_host_skeleton_init (ControlHostSkeleton *skeleton)
{
#if GLIB_VERSION_MAX_ALLOWED >= GLIB_VERSION_2_38
skeleton->priv = control_host_skeleton_get_instance_private (skeleton);
#else
skeleton->priv = G_TYPE_INSTANCE_GET_PRIVATE (skeleton, TYPE_CONTROL_HOST_SKELETON, ControlHostSkeletonPrivate);
#endif
g_mutex_init (&skeleton->priv->lock);
skeleton->priv->context = g_main_context_ref_thread_default ();
}
static void
control_host_skeleton_class_init (ControlHostSkeletonClass *klass)
{
GObjectClass *gobject_class;
GDBusInterfaceSkeletonClass *skeleton_class;
gobject_class = G_OBJECT_CLASS (klass);
gobject_class->finalize = control_host_skeleton_finalize;
skeleton_class = G_DBUS_INTERFACE_SKELETON_CLASS (klass);
skeleton_class->get_info = control_host_skeleton_dbus_interface_get_info;
skeleton_class->get_properties = control_host_skeleton_dbus_interface_get_properties;
skeleton_class->flush = control_host_skeleton_dbus_interface_flush;
skeleton_class->get_vtable = control_host_skeleton_dbus_interface_get_vtable;
#if GLIB_VERSION_MAX_ALLOWED < GLIB_VERSION_2_38
g_type_class_add_private (klass, sizeof (ControlHostSkeletonPrivate));
#endif
}
static void
control_host_skeleton_iface_init (ControlHostIface *iface)
{
iface->booted = _control_host_on_signal_booted;
}
/**
* control_host_skeleton_new:
*
* Creates a skeleton object for the D-Bus interface <link linkend="gdbus-interface-org-openbmc-control-Host.top_of_page">org.openbmc.control.Host</link>.
*
* Returns: (transfer full) (type ControlHostSkeleton): The skeleton object.
*/
ControlHost *
control_host_skeleton_new (void)
{
return CONTROL_HOST (g_object_new (TYPE_CONTROL_HOST_SKELETON, NULL));
}
/* ------------------------------------------------------------------------
* Code for interface org.openbmc.control.Power
* ------------------------------------------------------------------------
*/
/**
* SECTION:ControlPower
* @title: ControlPower
* @short_description: Generated C code for the org.openbmc.control.Power D-Bus interface
*
* This section contains code for working with the <link linkend="gdbus-interface-org-openbmc-control-Power.top_of_page">org.openbmc.control.Power</link> D-Bus interface in C.
*/
/* ---- Introspection data for org.openbmc.control.Power ---- */
static const _ExtendedGDBusArgInfo _control_power_method_info_set_power_state_IN_ARG_state =
{
{
-1,
(gchar *) "state",
(gchar *) "i",
NULL
},
FALSE
};
static const _ExtendedGDBusArgInfo * const _control_power_method_info_set_power_state_IN_ARG_pointers[] =
{
&_control_power_method_info_set_power_state_IN_ARG_state,
NULL
};
static const _ExtendedGDBusMethodInfo _control_power_method_info_set_power_state =
{
{
-1,
(gchar *) "setPowerState",
(GDBusArgInfo **) &_control_power_method_info_set_power_state_IN_ARG_pointers,
NULL,
NULL
},
"handle-set-power-state",
FALSE
};
static const _ExtendedGDBusArgInfo _control_power_method_info_get_power_state_OUT_ARG_state =
{
{
-1,
(gchar *) "state",
(gchar *) "i",
NULL
},
FALSE
};
static const _ExtendedGDBusArgInfo * const _control_power_method_info_get_power_state_OUT_ARG_pointers[] =
{
&_control_power_method_info_get_power_state_OUT_ARG_state,
NULL
};
static const _ExtendedGDBusMethodInfo _control_power_method_info_get_power_state =
{
{
-1,
(gchar *) "getPowerState",
NULL,
(GDBusArgInfo **) &_control_power_method_info_get_power_state_OUT_ARG_pointers,
NULL
},
"handle-get-power-state",
FALSE
};
static const _ExtendedGDBusMethodInfo * const _control_power_method_info_pointers[] =
{
&_control_power_method_info_set_power_state,
&_control_power_method_info_get_power_state,
NULL
};
static const _ExtendedGDBusSignalInfo _control_power_signal_info_power_good =
{
{
-1,
(gchar *) "PowerGood",
NULL,
NULL
},
"power-good"
};
static const _ExtendedGDBusSignalInfo _control_power_signal_info_power_lost =
{
{
-1,
(gchar *) "PowerLost",
NULL,
NULL
},
"power-lost"
};
static const _ExtendedGDBusSignalInfo * const _control_power_signal_info_pointers[] =
{
&_control_power_signal_info_power_good,
&_control_power_signal_info_power_lost,
NULL
};
static const _ExtendedGDBusPropertyInfo _control_power_property_info_pgood =
{
{
-1,
(gchar *) "pgood",
(gchar *) "i",
G_DBUS_PROPERTY_INFO_FLAGS_READABLE,
NULL
},
"pgood",
FALSE
};
static const _ExtendedGDBusPropertyInfo _control_power_property_info_state =
{
{
-1,
(gchar *) "state",
(gchar *) "i",
G_DBUS_PROPERTY_INFO_FLAGS_READABLE,
NULL
},
"state",
FALSE
};
static const _ExtendedGDBusPropertyInfo * const _control_power_property_info_pointers[] =
{
&_control_power_property_info_pgood,
&_control_power_property_info_state,
NULL
};
static const _ExtendedGDBusInterfaceInfo _control_power_interface_info =
{
{
-1,
(gchar *) "org.openbmc.control.Power",
(GDBusMethodInfo **) &_control_power_method_info_pointers,
(GDBusSignalInfo **) &_control_power_signal_info_pointers,
(GDBusPropertyInfo **) &_control_power_property_info_pointers,
NULL
},
"control-power",
};
/**
* control_power_interface_info:
*
* Gets a machine-readable description of the <link linkend="gdbus-interface-org-openbmc-control-Power.top_of_page">org.openbmc.control.Power</link> D-Bus interface.
*
* Returns: (transfer none): A #GDBusInterfaceInfo. Do not free.
*/
GDBusInterfaceInfo *
control_power_interface_info (void)
{
return (GDBusInterfaceInfo *) &_control_power_interface_info.parent_struct;
}
/**
* control_power_override_properties:
* @klass: The class structure for a #GObject<!-- -->-derived class.
* @property_id_begin: The property id to assign to the first overridden property.
*
* Overrides all #GObject properties in the #ControlPower interface for a concrete class.
* The properties are overridden in the order they are defined.
*
* Returns: The last property id.
*/
guint
control_power_override_properties (GObjectClass *klass, guint property_id_begin)
{
g_object_class_override_property (klass, property_id_begin++, "pgood");
g_object_class_override_property (klass, property_id_begin++, "state");
return property_id_begin - 1;
}
/**
* ControlPower:
*
* Abstract interface type for the D-Bus interface <link linkend="gdbus-interface-org-openbmc-control-Power.top_of_page">org.openbmc.control.Power</link>.
*/
/**
* ControlPowerIface:
* @parent_iface: The parent interface.
* @handle_get_power_state: Handler for the #ControlPower::handle-get-power-state signal.
* @handle_set_power_state: Handler for the #ControlPower::handle-set-power-state signal.
* @get_pgood: Getter for the #ControlPower:pgood property.
* @get_state: Getter for the #ControlPower:state property.
* @power_good: Handler for the #ControlPower::power-good signal.
* @power_lost: Handler for the #ControlPower::power-lost signal.
*
* Virtual table for the D-Bus interface <link linkend="gdbus-interface-org-openbmc-control-Power.top_of_page">org.openbmc.control.Power</link>.
*/
typedef ControlPowerIface ControlPowerInterface;
G_DEFINE_INTERFACE (ControlPower, control_power, G_TYPE_OBJECT);
static void
control_power_default_init (ControlPowerIface *iface)
{
/* GObject signals for incoming D-Bus method calls: */
/**
* ControlPower::handle-set-power-state:
* @object: A #ControlPower.
* @invocation: A #GDBusMethodInvocation.
* @arg_state: Argument passed by remote caller.
*
* Signal emitted when a remote caller is invoking the <link linkend="gdbus-method-org-openbmc-control-Power.setPowerState">setPowerState()</link> D-Bus method.
*
* If a signal handler returns %TRUE, it means the signal handler will handle the invocation (e.g. take a reference to @invocation and eventually call control_power_complete_set_power_state() or e.g. g_dbus_method_invocation_return_error() on it) and no order signal handlers will run. If no signal handler handles the invocation, the %G_DBUS_ERROR_UNKNOWN_METHOD error is returned.
*
* Returns: %TRUE if the invocation was handled, %FALSE to let other signal handlers run.
*/
g_signal_new ("handle-set-power-state",
G_TYPE_FROM_INTERFACE (iface),
G_SIGNAL_RUN_LAST,
G_STRUCT_OFFSET (ControlPowerIface, handle_set_power_state),
g_signal_accumulator_true_handled,
NULL,
g_cclosure_marshal_generic,
G_TYPE_BOOLEAN,
2,
G_TYPE_DBUS_METHOD_INVOCATION, G_TYPE_INT);
/**
* ControlPower::handle-get-power-state:
* @object: A #ControlPower.
* @invocation: A #GDBusMethodInvocation.
*
* Signal emitted when a remote caller is invoking the <link linkend="gdbus-method-org-openbmc-control-Power.getPowerState">getPowerState()</link> D-Bus method.
*
* If a signal handler returns %TRUE, it means the signal handler will handle the invocation (e.g. take a reference to @invocation and eventually call control_power_complete_get_power_state() or e.g. g_dbus_method_invocation_return_error() on it) and no order signal handlers will run. If no signal handler handles the invocation, the %G_DBUS_ERROR_UNKNOWN_METHOD error is returned.
*
* Returns: %TRUE if the invocation was handled, %FALSE to let other signal handlers run.
*/
g_signal_new ("handle-get-power-state",
G_TYPE_FROM_INTERFACE (iface),
G_SIGNAL_RUN_LAST,
G_STRUCT_OFFSET (ControlPowerIface, handle_get_power_state),
g_signal_accumulator_true_handled,
NULL,
g_cclosure_marshal_generic,
G_TYPE_BOOLEAN,
1,
G_TYPE_DBUS_METHOD_INVOCATION);
/* GObject signals for received D-Bus signals: */
/**
* ControlPower::power-good:
* @object: A #ControlPower.
*
* On the client-side, this signal is emitted whenever the D-Bus signal <link linkend="gdbus-signal-org-openbmc-control-Power.PowerGood">"PowerGood"</link> is received.
*
* On the service-side, this signal can be used with e.g. g_signal_emit_by_name() to make the object emit the D-Bus signal.
*/
g_signal_new ("power-good",
G_TYPE_FROM_INTERFACE (iface),
G_SIGNAL_RUN_LAST,
G_STRUCT_OFFSET (ControlPowerIface, power_good),
NULL,
NULL,
g_cclosure_marshal_generic,
G_TYPE_NONE,
0);
/**
* ControlPower::power-lost:
* @object: A #ControlPower.
*
* On the client-side, this signal is emitted whenever the D-Bus signal <link linkend="gdbus-signal-org-openbmc-control-Power.PowerLost">"PowerLost"</link> is received.
*
* On the service-side, this signal can be used with e.g. g_signal_emit_by_name() to make the object emit the D-Bus signal.
*/
g_signal_new ("power-lost",
G_TYPE_FROM_INTERFACE (iface),
G_SIGNAL_RUN_LAST,
G_STRUCT_OFFSET (ControlPowerIface, power_lost),
NULL,
NULL,
g_cclosure_marshal_generic,
G_TYPE_NONE,
0);
/* GObject properties for D-Bus properties: */
/**
* ControlPower:pgood:
*
* Represents the D-Bus property <link linkend="gdbus-property-org-openbmc-control-Power.pgood">"pgood"</link>.
*
* Since the D-Bus property for this #GObject property is readable but not writable, it is meaningful to read from it on both the client- and service-side. It is only meaningful, however, to write to it on the service-side.
*/
g_object_interface_install_property (iface,
g_param_spec_int ("pgood", "pgood", "pgood", G_MININT32, G_MAXINT32, 0, G_PARAM_READWRITE | G_PARAM_STATIC_STRINGS));
/**
* ControlPower:state:
*
* Represents the D-Bus property <link linkend="gdbus-property-org-openbmc-control-Power.state">"state"</link>.
*
* Since the D-Bus property for this #GObject property is readable but not writable, it is meaningful to read from it on both the client- and service-side. It is only meaningful, however, to write to it on the service-side.
*/
g_object_interface_install_property (iface,
g_param_spec_int ("state", "state", "state", G_MININT32, G_MAXINT32, 0, G_PARAM_READWRITE | G_PARAM_STATIC_STRINGS));
}
/**
* control_power_get_pgood: (skip)
* @object: A #ControlPower.
*
* Gets the value of the <link linkend="gdbus-property-org-openbmc-control-Power.pgood">"pgood"</link> D-Bus property.
*
* Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.
*
* Returns: The property value.
*/
gint
control_power_get_pgood (ControlPower *object)
{
return CONTROL_POWER_GET_IFACE (object)->get_pgood (object);
}
/**
* control_power_set_pgood: (skip)
* @object: A #ControlPower.
* @value: The value to set.
*
* Sets the <link linkend="gdbus-property-org-openbmc-control-Power.pgood">"pgood"</link> D-Bus property to @value.
*
* Since this D-Bus property is not writable, it is only meaningful to use this function on the service-side.
*/
void
control_power_set_pgood (ControlPower *object, gint value)
{
g_object_set (G_OBJECT (object), "pgood", value, NULL);
}
/**
* control_power_get_state: (skip)
* @object: A #ControlPower.
*
* Gets the value of the <link linkend="gdbus-property-org-openbmc-control-Power.state">"state"</link> D-Bus property.
*
* Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side.
*
* Returns: The property value.
*/
gint
control_power_get_state (ControlPower *object)
{
return CONTROL_POWER_GET_IFACE (object)->get_state (object);
}
/**
* control_power_set_state: (skip)
* @object: A #ControlPower.
* @value: The value to set.
*
* Sets the <link linkend="gdbus-property-org-openbmc-control-Power.state">"state"</link> D-Bus property to @value.
*
* Since this D-Bus property is not writable, it is only meaningful to use this function on the service-side.
*/
void
control_power_set_state (ControlPower *object, gint value)
{
g_object_set (G_OBJECT (object), "state", value, NULL);
}
/**
* control_power_emit_power_good:
* @object: A #ControlPower.
*
* Emits the <link linkend="gdbus-signal-org-openbmc-control-Power.PowerGood">"PowerGood"</link> D-Bus signal.
*/
void
control_power_emit_power_good (
ControlPower *object)
{
g_signal_emit_by_name (object, "power-good");
}
/**
* control_power_emit_power_lost:
* @object: A #ControlPower.
*
* Emits the <link linkend="gdbus-signal-org-openbmc-control-Power.PowerLost">"PowerLost"</link> D-Bus signal.
*/
void
control_power_emit_power_lost (
ControlPower *object)
{
g_signal_emit_by_name (object, "power-lost");
}
/**
* control_power_call_set_power_state:
* @proxy: A #ControlPowerProxy.
* @arg_state: Argument to pass with the method invocation.
* @cancellable: (allow-none): A #GCancellable or %NULL.
* @callback: A #GAsyncReadyCallback to call when the request is satisfied or %NULL.
* @user_data: User data to pass to @callback.
*
* Asynchronously invokes the <link linkend="gdbus-method-org-openbmc-control-Power.setPowerState">setPowerState()</link> D-Bus method on @proxy.
* When the operation is finished, @callback will be invoked in the <link linkend="g-main-context-push-thread-default">thread-default main loop</link> of the thread you are calling this method from.
* You can then call control_power_call_set_power_state_finish() to get the result of the operation.
*
* See control_power_call_set_power_state_sync() for the synchronous, blocking version of this method.
*/
void
control_power_call_set_power_state (
ControlPower *proxy,
gint arg_state,
GCancellable *cancellable,
GAsyncReadyCallback callback,
gpointer user_data)
{
g_dbus_proxy_call (G_DBUS_PROXY (proxy),
"setPowerState",
g_variant_new ("(i)",
arg_state),
G_DBUS_CALL_FLAGS_NONE,
-1,
cancellable,
callback,
user_data);
}
/**
* control_power_call_set_power_state_finish:
* @proxy: A #ControlPowerProxy.
* @res: The #GAsyncResult obtained from the #GAsyncReadyCallback passed to control_power_call_set_power_state().
* @error: Return location for error or %NULL.
*
* Finishes an operation started with control_power_call_set_power_state().
*
* Returns: (skip): %TRUE if the call succeded, %FALSE if @error is set.
*/
gboolean
control_power_call_set_power_state_finish (
ControlPower *proxy,
GAsyncResult *res,
GError **error)
{
GVariant *_ret;
_ret = g_dbus_proxy_call_finish (G_DBUS_PROXY (proxy), res, error);
if (_ret == NULL)
goto _out;
g_variant_get (_ret,
"()");
g_variant_unref (_ret);
_out:
return _ret != NULL;
}
/**
* control_power_call_set_power_state_sync:
* @proxy: A #ControlPowerProxy.
* @arg_state: Argument to pass with the method invocation.
* @cancellable: (allow-none): A #GCancellable or %NULL.
* @error: Return location for error or %NULL.
*
* Synchronously invokes the <link linkend="gdbus-method-org-openbmc-control-Power.setPowerState">setPowerState()</link> D-Bus method on @proxy. The calling thread is blocked until a reply is received.
*
* See control_power_call_set_power_state() for the asynchronous version of this method.
*
* Returns: (skip): %TRUE if the call succeded, %FALSE if @error is set.
*/
gboolean
control_power_call_set_power_state_sync (
ControlPower *proxy,
gint arg_state,
GCancellable *cancellable,
GError **error)
{
GVariant *_ret;
_ret = g_dbus_proxy_call_sync (G_DBUS_PROXY (proxy),
"setPowerState",
g_variant_new ("(i)",
arg_state),
G_DBUS_CALL_FLAGS_NONE,
-1,
cancellable,
error);
if (_ret == NULL)
goto _out;
g_variant_get (_ret,
"()");
g_variant_unref (_ret);
_out:
return _ret != NULL;
}
/**
* control_power_call_get_power_state:
* @proxy: A #ControlPowerProxy.
* @cancellable: (allow-none): A #GCancellable or %NULL.
* @callback: A #GAsyncReadyCallback to call when the request is satisfied or %NULL.
* @user_data: User data to pass to @callback.
*
* Asynchronously invokes the <link linkend="gdbus-method-org-openbmc-control-Power.getPowerState">getPowerState()</link> D-Bus method on @proxy.
* When the operation is finished, @callback will be invoked in the <link linkend="g-main-context-push-thread-default">thread-default main loop</link> of the thread you are calling this method from.
* You can then call control_power_call_get_power_state_finish() to get the result of the operation.
*
* See control_power_call_get_power_state_sync() for the synchronous, blocking version of this method.
*/
void
control_power_call_get_power_state (
ControlPower *proxy,
GCancellable *cancellable,
GAsyncReadyCallback callback,
gpointer user_data)
{
g_dbus_proxy_call (G_DBUS_PROXY (proxy),
"getPowerState",
g_variant_new ("()"),
G_DBUS_CALL_FLAGS_NONE,
-1,
cancellable,
callback,
user_data);
}
/**
* control_power_call_get_power_state_finish:
* @proxy: A #ControlPowerProxy.
* @out_state: (out): Return location for return parameter or %NULL to ignore.
* @res: The #GAsyncResult obtained from the #GAsyncReadyCallback passed to control_power_call_get_power_state().
* @error: Return location for error or %NULL.
*
* Finishes an operation started with control_power_call_get_power_state().
*
* Returns: (skip): %TRUE if the call succeded, %FALSE if @error is set.
*/
gboolean
control_power_call_get_power_state_finish (
ControlPower *proxy,
gint *out_state,
GAsyncResult *res,
GError **error)
{
GVariant *_ret;
_ret = g_dbus_proxy_call_finish (G_DBUS_PROXY (proxy), res, error);
if (_ret == NULL)
goto _out;
g_variant_get (_ret,
"(i)",
out_state);
g_variant_unref (_ret);
_out:
return _ret != NULL;
}
/**
* control_power_call_get_power_state_sync:
* @proxy: A #ControlPowerProxy.
* @out_state: (out): Return location for return parameter or %NULL to ignore.
* @cancellable: (allow-none): A #GCancellable or %NULL.
* @error: Return location for error or %NULL.
*
* Synchronously invokes the <link linkend="gdbus-method-org-openbmc-control-Power.getPowerState">getPowerState()</link> D-Bus method on @proxy. The calling thread is blocked until a reply is received.
*
* See control_power_call_get_power_state() for the asynchronous version of this method.
*
* Returns: (skip): %TRUE if the call succeded, %FALSE if @error is set.
*/
gboolean
control_power_call_get_power_state_sync (
ControlPower *proxy,
gint *out_state,
GCancellable *cancellable,
GError **error)
{
GVariant *_ret;
_ret = g_dbus_proxy_call_sync (G_DBUS_PROXY (proxy),
"getPowerState",
g_variant_new ("()"),
G_DBUS_CALL_FLAGS_NONE,
-1,
cancellable,
error);
if (_ret == NULL)
goto _out;
g_variant_get (_ret,
"(i)",
out_state);
g_variant_unref (_ret);
_out:
return _ret != NULL;
}
/**
* control_power_complete_set_power_state:
* @object: A #ControlPower.
* @invocation: (transfer full): A #GDBusMethodInvocation.
*
* Helper function used in service implementations to finish handling invocations of the <link linkend="gdbus-method-org-openbmc-control-Power.setPowerState">setPowerState()</link> D-Bus method. If you instead want to finish handling an invocation by returning an error, use g_dbus_method_invocation_return_error() or similar.
*
* This method will free @invocation, you cannot use it afterwards.
*/
void
control_power_complete_set_power_state (
ControlPower *object,
GDBusMethodInvocation *invocation)
{
g_dbus_method_invocation_return_value (invocation,
g_variant_new ("()"));
}
/**
* control_power_complete_get_power_state:
* @object: A #ControlPower.
* @invocation: (transfer full): A #GDBusMethodInvocation.
* @state: Parameter to return.
*
* Helper function used in service implementations to finish handling invocations of the <link linkend="gdbus-method-org-openbmc-control-Power.getPowerState">getPowerState()</link> D-Bus method. If you instead want to finish handling an invocation by returning an error, use g_dbus_method_invocation_return_error() or similar.
*
* This method will free @invocation, you cannot use it afterwards.
*/
void
control_power_complete_get_power_state (
ControlPower *object,
GDBusMethodInvocation *invocation,
gint state)
{
g_dbus_method_invocation_return_value (invocation,
g_variant_new ("(i)",
state));
}
/* ------------------------------------------------------------------------ */
/**
* ControlPowerProxy:
*
* The #ControlPowerProxy structure contains only private data and should only be accessed using the provided API.
*/
/**
* ControlPowerProxyClass:
* @parent_class: The parent class.
*
* Class structure for #ControlPowerProxy.
*/
struct _ControlPowerProxyPrivate
{
GData *qdata;
};
static void control_power_proxy_iface_init (ControlPowerIface *iface);
#if GLIB_VERSION_MAX_ALLOWED >= GLIB_VERSION_2_38
G_DEFINE_TYPE_WITH_CODE (ControlPowerProxy, control_power_proxy, G_TYPE_DBUS_PROXY,
G_ADD_PRIVATE (ControlPowerProxy)
G_IMPLEMENT_INTERFACE (TYPE_CONTROL_POWER, control_power_proxy_iface_init));
#else
G_DEFINE_TYPE_WITH_CODE (ControlPowerProxy, control_power_proxy, G_TYPE_DBUS_PROXY,
G_IMPLEMENT_INTERFACE (TYPE_CONTROL_POWER, control_power_proxy_iface_init));
#endif
static void
control_power_proxy_finalize (GObject *object)
{
ControlPowerProxy *proxy = CONTROL_POWER_PROXY (object);
g_datalist_clear (&proxy->priv->qdata);
G_OBJECT_CLASS (control_power_proxy_parent_class)->finalize (object);
}
static void
control_power_proxy_get_property (GObject *object,
guint prop_id,
GValue *value,
GParamSpec *pspec G_GNUC_UNUSED)
{
const _ExtendedGDBusPropertyInfo *info;
GVariant *variant;
g_assert (prop_id != 0 && prop_id - 1 < 2);
info = _control_power_property_info_pointers[prop_id - 1];
variant = g_dbus_proxy_get_cached_property (G_DBUS_PROXY (object), info->parent_struct.name);
if (info->use_gvariant)
{
g_value_set_variant (value, variant);
}
else
{
if (variant != NULL)
g_dbus_gvariant_to_gvalue (variant, value);
}
if (variant != NULL)
g_variant_unref (variant);
}
static void
control_power_proxy_set_property_cb (GDBusProxy *proxy,
GAsyncResult *res,
gpointer user_data)
{
const _ExtendedGDBusPropertyInfo *info = user_data;
GError *error;
GVariant *_ret;
error = NULL;
_ret = g_dbus_proxy_call_finish (proxy, res, &error);
if (!_ret)
{
g_warning ("Error setting property '%s' on interface org.openbmc.control.Power: %s (%s, %d)",
info->parent_struct.name,
error->message, g_quark_to_string (error->domain), error->code);
g_error_free (error);
}
else
{
g_variant_unref (_ret);
}
}
static void
control_power_proxy_set_property (GObject *object,
guint prop_id,
const GValue *value,
GParamSpec *pspec G_GNUC_UNUSED)
{
const _ExtendedGDBusPropertyInfo *info;
GVariant *variant;
g_assert (prop_id != 0 && prop_id - 1 < 2);
info = _control_power_property_info_pointers[prop_id - 1];
variant = g_dbus_gvalue_to_gvariant (value, G_VARIANT_TYPE (info->parent_struct.signature));
g_dbus_proxy_call (G_DBUS_PROXY (object),
"org.freedesktop.DBus.Properties.Set",
g_variant_new ("(ssv)", "org.openbmc.control.Power", info->parent_struct.name, variant),
G_DBUS_CALL_FLAGS_NONE,
-1,
NULL, (GAsyncReadyCallback) control_power_proxy_set_property_cb, (GDBusPropertyInfo *) &info->parent_struct);
g_variant_unref (variant);
}
static void
control_power_proxy_g_signal (GDBusProxy *proxy,
const gchar *sender_name G_GNUC_UNUSED,
const gchar *signal_name,
GVariant *parameters)
{
_ExtendedGDBusSignalInfo *info;
GVariantIter iter;
GVariant *child;
GValue *paramv;
guint num_params;
guint n;
guint signal_id;
info = (_ExtendedGDBusSignalInfo *) g_dbus_interface_info_lookup_signal ((GDBusInterfaceInfo *) &_control_power_interface_info.parent_struct, signal_name);
if (info == NULL)
return;
num_params = g_variant_n_children (parameters);
paramv = g_new0 (GValue, num_params + 1);
g_value_init (&paramv[0], TYPE_CONTROL_POWER);
g_value_set_object (&paramv[0], proxy);
g_variant_iter_init (&iter, parameters);
n = 1;
while ((child = g_variant_iter_next_value (&iter)) != NULL)
{
_ExtendedGDBusArgInfo *arg_info = (_ExtendedGDBusArgInfo *) info->parent_struct.args[n - 1];
if (arg_info->use_gvariant)
{
g_value_init (&paramv[n], G_TYPE_VARIANT);
g_value_set_variant (&paramv[n], child);
n++;
}
else
g_dbus_gvariant_to_gvalue (child, &paramv[n++]);
g_variant_unref (child);
}
signal_id = g_signal_lookup (info->signal_name, TYPE_CONTROL_POWER);
g_signal_emitv (paramv, signal_id, 0, NULL);
for (n = 0; n < num_params + 1; n++)
g_value_unset (&paramv[n]);
g_free (paramv);
}
static void
control_power_proxy_g_properties_changed (GDBusProxy *_proxy,
GVariant *changed_properties,
const gchar *const *invalidated_properties)
{
ControlPowerProxy *proxy = CONTROL_POWER_PROXY (_proxy);
guint n;
const gchar *key;
GVariantIter *iter;
_ExtendedGDBusPropertyInfo *info;
g_variant_get (changed_properties, "a{sv}", &iter);
while (g_variant_iter_next (iter, "{&sv}", &key, NULL))
{
info = (_ExtendedGDBusPropertyInfo *) g_dbus_interface_info_lookup_property ((GDBusInterfaceInfo *) &_control_power_interface_info.parent_struct, key);
g_datalist_remove_data (&proxy->priv->qdata, key);
if (info != NULL)
g_object_notify (G_OBJECT (proxy), info->hyphen_name);
}
g_variant_iter_free (iter);
for (n = 0; invalidated_properties[n] != NULL; n++)
{
info = (_ExtendedGDBusPropertyInfo *) g_dbus_interface_info_lookup_property ((GDBusInterfaceInfo *) &_control_power_interface_info.parent_struct, invalidated_properties[n]);
g_datalist_remove_data (&proxy->priv->qdata, invalidated_properties[n]);
if (info != NULL)
g_object_notify (G_OBJECT (proxy), info->hyphen_name);
}
}
static gint
control_power_proxy_get_pgood (ControlPower *object)
{
ControlPowerProxy *proxy = CONTROL_POWER_PROXY (object);
GVariant *variant;
gint value = 0;
variant = g_dbus_proxy_get_cached_property (G_DBUS_PROXY (proxy), "pgood");
if (variant != NULL)
{
value = g_variant_get_int32 (variant);
g_variant_unref (variant);
}
return value;
}
static gint
control_power_proxy_get_state (ControlPower *object)
{
ControlPowerProxy *proxy = CONTROL_POWER_PROXY (object);
GVariant *variant;
gint value = 0;
variant = g_dbus_proxy_get_cached_property (G_DBUS_PROXY (proxy), "state");
if (variant != NULL)
{
value = g_variant_get_int32 (variant);
g_variant_unref (variant);
}
return value;
}
static void
control_power_proxy_init (ControlPowerProxy *proxy)
{
#if GLIB_VERSION_MAX_ALLOWED >= GLIB_VERSION_2_38
proxy->priv = control_power_proxy_get_instance_private (proxy);
#else
proxy->priv = G_TYPE_INSTANCE_GET_PRIVATE (proxy, TYPE_CONTROL_POWER_PROXY, ControlPowerProxyPrivate);
#endif
g_dbus_proxy_set_interface_info (G_DBUS_PROXY (proxy), control_power_interface_info ());
}
static void
control_power_proxy_class_init (ControlPowerProxyClass *klass)
{
GObjectClass *gobject_class;
GDBusProxyClass *proxy_class;
gobject_class = G_OBJECT_CLASS (klass);
gobject_class->finalize = control_power_proxy_finalize;
gobject_class->get_property = control_power_proxy_get_property;
gobject_class->set_property = control_power_proxy_set_property;
proxy_class = G_DBUS_PROXY_CLASS (klass);
proxy_class->g_signal = control_power_proxy_g_signal;
proxy_class->g_properties_changed = control_power_proxy_g_properties_changed;
control_power_override_properties (gobject_class, 1);
#if GLIB_VERSION_MAX_ALLOWED < GLIB_VERSION_2_38
g_type_class_add_private (klass, sizeof (ControlPowerProxyPrivate));
#endif
}
static void
control_power_proxy_iface_init (ControlPowerIface *iface)
{
iface->get_pgood = control_power_proxy_get_pgood;
iface->get_state = control_power_proxy_get_state;
}
/**
* control_power_proxy_new:
* @connection: A #GDBusConnection.
* @flags: Flags from the #GDBusProxyFlags enumeration.
* @name: (allow-none): A bus name (well-known or unique) or %NULL if @connection is not a message bus connection.
* @object_path: An object path.
* @cancellable: (allow-none): A #GCancellable or %NULL.
* @callback: A #GAsyncReadyCallback to call when the request is satisfied.
* @user_data: User data to pass to @callback.
*
* Asynchronously creates a proxy for the D-Bus interface <link linkend="gdbus-interface-org-openbmc-control-Power.top_of_page">org.openbmc.control.Power</link>. See g_dbus_proxy_new() for more details.
*
* When the operation is finished, @callback will be invoked in the <link linkend="g-main-context-push-thread-default">thread-default main loop</link> of the thread you are calling this method from.
* You can then call control_power_proxy_new_finish() to get the result of the operation.
*
* See control_power_proxy_new_sync() for the synchronous, blocking version of this constructor.
*/
void
control_power_proxy_new (
GDBusConnection *connection,
GDBusProxyFlags flags,
const gchar *name,
const gchar *object_path,
GCancellable *cancellable,
GAsyncReadyCallback callback,
gpointer user_data)
{
g_async_initable_new_async (TYPE_CONTROL_POWER_PROXY, G_PRIORITY_DEFAULT, cancellable, callback, user_data, "g-flags", flags, "g-name", name, "g-connection", connection, "g-object-path", object_path, "g-interface-name", "org.openbmc.control.Power", NULL);
}
/**
* control_power_proxy_new_finish:
* @res: The #GAsyncResult obtained from the #GAsyncReadyCallback passed to control_power_proxy_new().
* @error: Return location for error or %NULL
*
* Finishes an operation started with control_power_proxy_new().
*
* Returns: (transfer full) (type ControlPowerProxy): The constructed proxy object or %NULL if @error is set.
*/
ControlPower *
control_power_proxy_new_finish (
GAsyncResult *res,
GError **error)
{
GObject *ret;
GObject *source_object;
source_object = g_async_result_get_source_object (res);
ret = g_async_initable_new_finish (G_ASYNC_INITABLE (source_object), res, error);
g_object_unref (source_object);
if (ret != NULL)
return CONTROL_POWER (ret);
else
return NULL;
}
/**
* control_power_proxy_new_sync:
* @connection: A #GDBusConnection.
* @flags: Flags from the #GDBusProxyFlags enumeration.
* @name: (allow-none): A bus name (well-known or unique) or %NULL if @connection is not a message bus connection.
* @object_path: An object path.
* @cancellable: (allow-none): A #GCancellable or %NULL.
* @error: Return location for error or %NULL
*
* Synchronously creates a proxy for the D-Bus interface <link linkend="gdbus-interface-org-openbmc-control-Power.top_of_page">org.openbmc.control.Power</link>. See g_dbus_proxy_new_sync() for more details.
*
* The calling thread is blocked until a reply is received.
*
* See control_power_proxy_new() for the asynchronous version of this constructor.
*
* Returns: (transfer full) (type ControlPowerProxy): The constructed proxy object or %NULL if @error is set.
*/
ControlPower *
control_power_proxy_new_sync (
GDBusConnection *connection,
GDBusProxyFlags flags,
const gchar *name,
const gchar *object_path,
GCancellable *cancellable,
GError **error)
{
GInitable *ret;
ret = g_initable_new (TYPE_CONTROL_POWER_PROXY, cancellable, error, "g-flags", flags, "g-name", name, "g-connection", connection, "g-object-path", object_path, "g-interface-name", "org.openbmc.control.Power", NULL);
if (ret != NULL)
return CONTROL_POWER (ret);
else
return NULL;
}
/**
* control_power_proxy_new_for_bus:
* @bus_type: A #GBusType.
* @flags: Flags from the #GDBusProxyFlags enumeration.
* @name: A bus name (well-known or unique).
* @object_path: An object path.
* @cancellable: (allow-none): A #GCancellable or %NULL.
* @callback: A #GAsyncReadyCallback to call when the request is satisfied.
* @user_data: User data to pass to @callback.
*
* Like control_power_proxy_new() but takes a #GBusType instead of a #GDBusConnection.
*
* When the operation is finished, @callback will be invoked in the <link linkend="g-main-context-push-thread-default">thread-default main loop</link> of the thread you are calling this method from.
* You can then call control_power_proxy_new_for_bus_finish() to get the result of the operation.
*
* See control_power_proxy_new_for_bus_sync() for the synchronous, blocking version of this constructor.
*/
void
control_power_proxy_new_for_bus (
GBusType bus_type,
GDBusProxyFlags flags,
const gchar *name,
const gchar *object_path,
GCancellable *cancellable,
GAsyncReadyCallback callback,
gpointer user_data)
{
g_async_initable_new_async (TYPE_CONTROL_POWER_PROXY, G_PRIORITY_DEFAULT, cancellable, callback, user_data, "g-flags", flags, "g-name", name, "g-bus-type", bus_type, "g-object-path", object_path, "g-interface-name", "org.openbmc.control.Power", NULL);
}
/**
* control_power_proxy_new_for_bus_finish:
* @res: The #GAsyncResult obtained from the #GAsyncReadyCallback passed to control_power_proxy_new_for_bus().
* @error: Return location for error or %NULL
*
* Finishes an operation started with control_power_proxy_new_for_bus().
*
* Returns: (transfer full) (type ControlPowerProxy): The constructed proxy object or %NULL if @error is set.
*/
ControlPower *
control_power_proxy_new_for_bus_finish (
GAsyncResult *res,
GError **error)
{
GObject *ret;
GObject *source_object;
source_object = g_async_result_get_source_object (res);
ret = g_async_initable_new_finish (G_ASYNC_INITABLE (source_object), res, error);
g_object_unref (source_object);
if (ret != NULL)
return CONTROL_POWER (ret);
else
return NULL;
}
/**
* control_power_proxy_new_for_bus_sync:
* @bus_type: A #GBusType.
* @flags: Flags from the #GDBusProxyFlags enumeration.
* @name: A bus name (well-known or unique).
* @object_path: An object path.
* @cancellable: (allow-none): A #GCancellable or %NULL.
* @error: Return location for error or %NULL
*
* Like control_power_proxy_new_sync() but takes a #GBusType instead of a #GDBusConnection.
*
* The calling thread is blocked until a reply is received.
*
* See control_power_proxy_new_for_bus() for the asynchronous version of this constructor.
*
* Returns: (transfer full) (type ControlPowerProxy): The constructed proxy object or %NULL if @error is set.
*/
ControlPower *
control_power_proxy_new_for_bus_sync (
GBusType bus_type,
GDBusProxyFlags flags,
const gchar *name,
const gchar *object_path,
GCancellable *cancellable,
GError **error)
{
GInitable *ret;
ret = g_initable_new (TYPE_CONTROL_POWER_PROXY, cancellable, error, "g-flags", flags, "g-name", name, "g-bus-type", bus_type, "g-object-path", object_path, "g-interface-name", "org.openbmc.control.Power", NULL);
if (ret != NULL)
return CONTROL_POWER (ret);
else
return NULL;
}
/* ------------------------------------------------------------------------ */
/**
* ControlPowerSkeleton:
*
* The #ControlPowerSkeleton structure contains only private data and should only be accessed using the provided API.
*/
/**
* ControlPowerSkeletonClass:
* @parent_class: The parent class.
*
* Class structure for #ControlPowerSkeleton.
*/
struct _ControlPowerSkeletonPrivate
{
GValue *properties;
GList *changed_properties;
GSource *changed_properties_idle_source;
GMainContext *context;
GMutex lock;
};
static void
_control_power_skeleton_handle_method_call (
GDBusConnection *connection G_GNUC_UNUSED,
const gchar *sender G_GNUC_UNUSED,
const gchar *object_path G_GNUC_UNUSED,
const gchar *interface_name,
const gchar *method_name,
GVariant *parameters,
GDBusMethodInvocation *invocation,
gpointer user_data)
{
ControlPowerSkeleton *skeleton = CONTROL_POWER_SKELETON (user_data);
_ExtendedGDBusMethodInfo *info;
GVariantIter iter;
GVariant *child;
GValue *paramv;
guint num_params;
guint num_extra;
guint n;
guint signal_id;
GValue return_value = G_VALUE_INIT;
info = (_ExtendedGDBusMethodInfo *) g_dbus_method_invocation_get_method_info (invocation);
g_assert (info != NULL);
num_params = g_variant_n_children (parameters);
num_extra = info->pass_fdlist ? 3 : 2; paramv = g_new0 (GValue, num_params + num_extra);
n = 0;
g_value_init (&paramv[n], TYPE_CONTROL_POWER);
g_value_set_object (&paramv[n++], skeleton);
g_value_init (&paramv[n], G_TYPE_DBUS_METHOD_INVOCATION);
g_value_set_object (&paramv[n++], invocation);
if (info->pass_fdlist)
{
#ifdef G_OS_UNIX
g_value_init (&paramv[n], G_TYPE_UNIX_FD_LIST);
g_value_set_object (&paramv[n++], g_dbus_message_get_unix_fd_list (g_dbus_method_invocation_get_message (invocation)));
#else
g_assert_not_reached ();
#endif
}
g_variant_iter_init (&iter, parameters);
while ((child = g_variant_iter_next_value (&iter)) != NULL)
{
_ExtendedGDBusArgInfo *arg_info = (_ExtendedGDBusArgInfo *) info->parent_struct.in_args[n - num_extra];
if (arg_info->use_gvariant)
{
g_value_init (&paramv[n], G_TYPE_VARIANT);
g_value_set_variant (&paramv[n], child);
n++;
}
else
g_dbus_gvariant_to_gvalue (child, &paramv[n++]);
g_variant_unref (child);
}
signal_id = g_signal_lookup (info->signal_name, TYPE_CONTROL_POWER);
g_value_init (&return_value, G_TYPE_BOOLEAN);
g_signal_emitv (paramv, signal_id, 0, &return_value);
if (!g_value_get_boolean (&return_value))
g_dbus_method_invocation_return_error (invocation, G_DBUS_ERROR, G_DBUS_ERROR_UNKNOWN_METHOD, "Method %s is not implemented on interface %s", method_name, interface_name);
g_value_unset (&return_value);
for (n = 0; n < num_params + num_extra; n++)
g_value_unset (&paramv[n]);
g_free (paramv);
}
static GVariant *
_control_power_skeleton_handle_get_property (
GDBusConnection *connection G_GNUC_UNUSED,
const gchar *sender G_GNUC_UNUSED,
const gchar *object_path G_GNUC_UNUSED,
const gchar *interface_name G_GNUC_UNUSED,
const gchar *property_name,
GError **error,
gpointer user_data)
{
ControlPowerSkeleton *skeleton = CONTROL_POWER_SKELETON (user_data);
GValue value = G_VALUE_INIT;
GParamSpec *pspec;
_ExtendedGDBusPropertyInfo *info;
GVariant *ret;
ret = NULL;
info = (_ExtendedGDBusPropertyInfo *) g_dbus_interface_info_lookup_property ((GDBusInterfaceInfo *) &_control_power_interface_info.parent_struct, property_name);
g_assert (info != NULL);
pspec = g_object_class_find_property (G_OBJECT_GET_CLASS (skeleton), info->hyphen_name);
if (pspec == NULL)
{
g_set_error (error, G_DBUS_ERROR, G_DBUS_ERROR_INVALID_ARGS, "No property with name %s", property_name);
}
else
{
g_value_init (&value, pspec->value_type);
g_object_get_property (G_OBJECT (skeleton), info->hyphen_name, &value);
ret = g_dbus_gvalue_to_gvariant (&value, G_VARIANT_TYPE (info->parent_struct.signature));
g_value_unset (&value);
}
return ret;
}
static gboolean
_control_power_skeleton_handle_set_property (
GDBusConnection *connection G_GNUC_UNUSED,
const gchar *sender G_GNUC_UNUSED,
const gchar *object_path G_GNUC_UNUSED,
const gchar *interface_name G_GNUC_UNUSED,
const gchar *property_name,
GVariant *variant,
GError **error,
gpointer user_data)
{
ControlPowerSkeleton *skeleton = CONTROL_POWER_SKELETON (user_data);
GValue value = G_VALUE_INIT;
GParamSpec *pspec;
_ExtendedGDBusPropertyInfo *info;
gboolean ret;
ret = FALSE;
info = (_ExtendedGDBusPropertyInfo *) g_dbus_interface_info_lookup_property ((GDBusInterfaceInfo *) &_control_power_interface_info.parent_struct, property_name);
g_assert (info != NULL);
pspec = g_object_class_find_property (G_OBJECT_GET_CLASS (skeleton), info->hyphen_name);
if (pspec == NULL)
{
g_set_error (error, G_DBUS_ERROR, G_DBUS_ERROR_INVALID_ARGS, "No property with name %s", property_name);
}
else
{
if (info->use_gvariant)
g_value_set_variant (&value, variant);
else
g_dbus_gvariant_to_gvalue (variant, &value);
g_object_set_property (G_OBJECT (skeleton), info->hyphen_name, &value);
g_value_unset (&value);
ret = TRUE;
}
return ret;
}
static const GDBusInterfaceVTable _control_power_skeleton_vtable =
{
_control_power_skeleton_handle_method_call,
_control_power_skeleton_handle_get_property,
_control_power_skeleton_handle_set_property,
{NULL}
};
static GDBusInterfaceInfo *
control_power_skeleton_dbus_interface_get_info (GDBusInterfaceSkeleton *skeleton G_GNUC_UNUSED)
{
return control_power_interface_info ();
}
static GDBusInterfaceVTable *
control_power_skeleton_dbus_interface_get_vtable (GDBusInterfaceSkeleton *skeleton G_GNUC_UNUSED)
{
return (GDBusInterfaceVTable *) &_control_power_skeleton_vtable;
}
static GVariant *
control_power_skeleton_dbus_interface_get_properties (GDBusInterfaceSkeleton *_skeleton)
{
ControlPowerSkeleton *skeleton = CONTROL_POWER_SKELETON (_skeleton);
GVariantBuilder builder;
guint n;
g_variant_builder_init (&builder, G_VARIANT_TYPE ("a{sv}"));
if (_control_power_interface_info.parent_struct.properties == NULL)
goto out;
for (n = 0; _control_power_interface_info.parent_struct.properties[n] != NULL; n++)
{
GDBusPropertyInfo *info = _control_power_interface_info.parent_struct.properties[n];
if (info->flags & G_DBUS_PROPERTY_INFO_FLAGS_READABLE)
{
GVariant *value;
value = _control_power_skeleton_handle_get_property (g_dbus_interface_skeleton_get_connection (G_DBUS_INTERFACE_SKELETON (skeleton)), NULL, g_dbus_interface_skeleton_get_object_path (G_DBUS_INTERFACE_SKELETON (skeleton)), "org.openbmc.control.Power", info->name, NULL, skeleton);
if (value != NULL)
{
g_variant_take_ref (value);
g_variant_builder_add (&builder, "{sv}", info->name, value);
g_variant_unref (value);
}
}
}
out:
return g_variant_builder_end (&builder);
}
static gboolean _control_power_emit_changed (gpointer user_data);
static void
control_power_skeleton_dbus_interface_flush (GDBusInterfaceSkeleton *_skeleton)
{
ControlPowerSkeleton *skeleton = CONTROL_POWER_SKELETON (_skeleton);
gboolean emit_changed = FALSE;
g_mutex_lock (&skeleton->priv->lock);
if (skeleton->priv->changed_properties_idle_source != NULL)
{
g_source_destroy (skeleton->priv->changed_properties_idle_source);
skeleton->priv->changed_properties_idle_source = NULL;
emit_changed = TRUE;
}
g_mutex_unlock (&skeleton->priv->lock);
if (emit_changed)
_control_power_emit_changed (skeleton);
}
static void
_control_power_on_signal_power_good (
ControlPower *object)
{
ControlPowerSkeleton *skeleton = CONTROL_POWER_SKELETON (object);
GList *connections, *l;
GVariant *signal_variant;
connections = g_dbus_interface_skeleton_get_connections (G_DBUS_INTERFACE_SKELETON (skeleton));
signal_variant = g_variant_ref_sink (g_variant_new ("()"));
for (l = connections; l != NULL; l = l->next)
{
GDBusConnection *connection = l->data;
g_dbus_connection_emit_signal (connection,
NULL, g_dbus_interface_skeleton_get_object_path (G_DBUS_INTERFACE_SKELETON (skeleton)), "org.openbmc.control.Power", "PowerGood",
signal_variant, NULL);
}
g_variant_unref (signal_variant);
g_list_free_full (connections, g_object_unref);
}
static void
_control_power_on_signal_power_lost (
ControlPower *object)
{
ControlPowerSkeleton *skeleton = CONTROL_POWER_SKELETON (object);
GList *connections, *l;
GVariant *signal_variant;
connections = g_dbus_interface_skeleton_get_connections (G_DBUS_INTERFACE_SKELETON (skeleton));
signal_variant = g_variant_ref_sink (g_variant_new ("()"));
for (l = connections; l != NULL; l = l->next)
{
GDBusConnection *connection = l->data;
g_dbus_connection_emit_signal (connection,
NULL, g_dbus_interface_skeleton_get_object_path (G_DBUS_INTERFACE_SKELETON (skeleton)), "org.openbmc.control.Power", "PowerLost",
signal_variant, NULL);
}
g_variant_unref (signal_variant);
g_list_free_full (connections, g_object_unref);
}
static void control_power_skeleton_iface_init (ControlPowerIface *iface);
#if GLIB_VERSION_MAX_ALLOWED >= GLIB_VERSION_2_38
G_DEFINE_TYPE_WITH_CODE (ControlPowerSkeleton, control_power_skeleton, G_TYPE_DBUS_INTERFACE_SKELETON,
G_ADD_PRIVATE (ControlPowerSkeleton)
G_IMPLEMENT_INTERFACE (TYPE_CONTROL_POWER, control_power_skeleton_iface_init));
#else
G_DEFINE_TYPE_WITH_CODE (ControlPowerSkeleton, control_power_skeleton, G_TYPE_DBUS_INTERFACE_SKELETON,
G_IMPLEMENT_INTERFACE (TYPE_CONTROL_POWER, control_power_skeleton_iface_init));
#endif
static void
control_power_skeleton_finalize (GObject *object)
{
ControlPowerSkeleton *skeleton = CONTROL_POWER_SKELETON (object);
guint n;
for (n = 0; n < 2; n++)
g_value_unset (&skeleton->priv->properties[n]);
g_free (skeleton->priv->properties);
g_list_free_full (skeleton->priv->changed_properties, (GDestroyNotify) _changed_property_free);
if (skeleton->priv->changed_properties_idle_source != NULL)
g_source_destroy (skeleton->priv->changed_properties_idle_source);
g_main_context_unref (skeleton->priv->context);
g_mutex_clear (&skeleton->priv->lock);
G_OBJECT_CLASS (control_power_skeleton_parent_class)->finalize (object);
}
static void
control_power_skeleton_get_property (GObject *object,
guint prop_id,
GValue *value,
GParamSpec *pspec G_GNUC_UNUSED)
{
ControlPowerSkeleton *skeleton = CONTROL_POWER_SKELETON (object);
g_assert (prop_id != 0 && prop_id - 1 < 2);
g_mutex_lock (&skeleton->priv->lock);
g_value_copy (&skeleton->priv->properties[prop_id - 1], value);
g_mutex_unlock (&skeleton->priv->lock);
}
static gboolean
_control_power_emit_changed (gpointer user_data)
{
ControlPowerSkeleton *skeleton = CONTROL_POWER_SKELETON (user_data);
GList *l;
GVariantBuilder builder;
GVariantBuilder invalidated_builder;
guint num_changes;
g_mutex_lock (&skeleton->priv->lock);
g_variant_builder_init (&builder, G_VARIANT_TYPE ("a{sv}"));
g_variant_builder_init (&invalidated_builder, G_VARIANT_TYPE ("as"));
for (l = skeleton->priv->changed_properties, num_changes = 0; l != NULL; l = l->next)
{
ChangedProperty *cp = l->data;
GVariant *variant;
const GValue *cur_value;
cur_value = &skeleton->priv->properties[cp->prop_id - 1];
if (!_g_value_equal (cur_value, &cp->orig_value))
{
variant = g_dbus_gvalue_to_gvariant (cur_value, G_VARIANT_TYPE (cp->info->parent_struct.signature));
g_variant_builder_add (&builder, "{sv}", cp->info->parent_struct.name, variant);
g_variant_unref (variant);
num_changes++;
}
}
if (num_changes > 0)
{
GList *connections, *ll;
GVariant *signal_variant;
signal_variant = g_variant_ref_sink (g_variant_new ("(sa{sv}as)", "org.openbmc.control.Power",
&builder, &invalidated_builder));
connections = g_dbus_interface_skeleton_get_connections (G_DBUS_INTERFACE_SKELETON (skeleton));
for (ll = connections; ll != NULL; ll = ll->next)
{
GDBusConnection *connection = ll->data;
g_dbus_connection_emit_signal (connection,
NULL, g_dbus_interface_skeleton_get_object_path (G_DBUS_INTERFACE_SKELETON (skeleton)),
"org.freedesktop.DBus.Properties",
"PropertiesChanged",
signal_variant,
NULL);
}
g_variant_unref (signal_variant);
g_list_free_full (connections, g_object_unref);
}
else
{
g_variant_builder_clear (&builder);
g_variant_builder_clear (&invalidated_builder);
}
g_list_free_full (skeleton->priv->changed_properties, (GDestroyNotify) _changed_property_free);
skeleton->priv->changed_properties = NULL;
skeleton->priv->changed_properties_idle_source = NULL;
g_mutex_unlock (&skeleton->priv->lock);
return FALSE;
}
static void
_control_power_schedule_emit_changed (ControlPowerSkeleton *skeleton, const _ExtendedGDBusPropertyInfo *info, guint prop_id, const GValue *orig_value)
{
ChangedProperty *cp;
GList *l;
cp = NULL;
for (l = skeleton->priv->changed_properties; l != NULL; l = l->next)
{
ChangedProperty *i_cp = l->data;
if (i_cp->info == info)
{
cp = i_cp;
break;
}
}
if (cp == NULL)
{
cp = g_new0 (ChangedProperty, 1);
cp->prop_id = prop_id;
cp->info = info;
skeleton->priv->changed_properties = g_list_prepend (skeleton->priv->changed_properties, cp);
g_value_init (&cp->orig_value, G_VALUE_TYPE (orig_value));
g_value_copy (orig_value, &cp->orig_value);
}
}
static void
control_power_skeleton_notify (GObject *object,
GParamSpec *pspec G_GNUC_UNUSED)
{
ControlPowerSkeleton *skeleton = CONTROL_POWER_SKELETON (object);
g_mutex_lock (&skeleton->priv->lock);
if (skeleton->priv->changed_properties != NULL &&
skeleton->priv->changed_properties_idle_source == NULL)
{
skeleton->priv->changed_properties_idle_source = g_idle_source_new ();
g_source_set_priority (skeleton->priv->changed_properties_idle_source, G_PRIORITY_DEFAULT);
g_source_set_callback (skeleton->priv->changed_properties_idle_source, _control_power_emit_changed, g_object_ref (skeleton), (GDestroyNotify) g_object_unref);
g_source_attach (skeleton->priv->changed_properties_idle_source, skeleton->priv->context);
g_source_unref (skeleton->priv->changed_properties_idle_source);
}
g_mutex_unlock (&skeleton->priv->lock);
}
static void
control_power_skeleton_set_property (GObject *object,
guint prop_id,
const GValue *value,
GParamSpec *pspec)
{
ControlPowerSkeleton *skeleton = CONTROL_POWER_SKELETON (object);
g_assert (prop_id != 0 && prop_id - 1 < 2);
g_mutex_lock (&skeleton->priv->lock);
g_object_freeze_notify (object);
if (!_g_value_equal (value, &skeleton->priv->properties[prop_id - 1]))
{
if (g_dbus_interface_skeleton_get_connection (G_DBUS_INTERFACE_SKELETON (skeleton)) != NULL)
_control_power_schedule_emit_changed (skeleton, _control_power_property_info_pointers[prop_id - 1], prop_id, &skeleton->priv->properties[prop_id - 1]);
g_value_copy (value, &skeleton->priv->properties[prop_id - 1]);
g_object_notify_by_pspec (object, pspec);
}
g_mutex_unlock (&skeleton->priv->lock);
g_object_thaw_notify (object);
}
static void
control_power_skeleton_init (ControlPowerSkeleton *skeleton)
{
#if GLIB_VERSION_MAX_ALLOWED >= GLIB_VERSION_2_38
skeleton->priv = control_power_skeleton_get_instance_private (skeleton);
#else
skeleton->priv = G_TYPE_INSTANCE_GET_PRIVATE (skeleton, TYPE_CONTROL_POWER_SKELETON, ControlPowerSkeletonPrivate);
#endif
g_mutex_init (&skeleton->priv->lock);
skeleton->priv->context = g_main_context_ref_thread_default ();
skeleton->priv->properties = g_new0 (GValue, 2);
g_value_init (&skeleton->priv->properties[0], G_TYPE_INT);
g_value_init (&skeleton->priv->properties[1], G_TYPE_INT);
}
static gint
control_power_skeleton_get_pgood (ControlPower *object)
{
ControlPowerSkeleton *skeleton = CONTROL_POWER_SKELETON (object);
gint value;
g_mutex_lock (&skeleton->priv->lock);
value = g_value_get_int (&(skeleton->priv->properties[0]));
g_mutex_unlock (&skeleton->priv->lock);
return value;
}
static gint
control_power_skeleton_get_state (ControlPower *object)
{
ControlPowerSkeleton *skeleton = CONTROL_POWER_SKELETON (object);
gint value;
g_mutex_lock (&skeleton->priv->lock);
value = g_value_get_int (&(skeleton->priv->properties[1]));
g_mutex_unlock (&skeleton->priv->lock);
return value;
}
static void
control_power_skeleton_class_init (ControlPowerSkeletonClass *klass)
{
GObjectClass *gobject_class;
GDBusInterfaceSkeletonClass *skeleton_class;
gobject_class = G_OBJECT_CLASS (klass);
gobject_class->finalize = control_power_skeleton_finalize;
gobject_class->get_property = control_power_skeleton_get_property;
gobject_class->set_property = control_power_skeleton_set_property;
gobject_class->notify = control_power_skeleton_notify;
control_power_override_properties (gobject_class, 1);
skeleton_class = G_DBUS_INTERFACE_SKELETON_CLASS (klass);
skeleton_class->get_info = control_power_skeleton_dbus_interface_get_info;
skeleton_class->get_properties = control_power_skeleton_dbus_interface_get_properties;
skeleton_class->flush = control_power_skeleton_dbus_interface_flush;
skeleton_class->get_vtable = control_power_skeleton_dbus_interface_get_vtable;
#if GLIB_VERSION_MAX_ALLOWED < GLIB_VERSION_2_38
g_type_class_add_private (klass, sizeof (ControlPowerSkeletonPrivate));
#endif
}
static void
control_power_skeleton_iface_init (ControlPowerIface *iface)
{
iface->power_good = _control_power_on_signal_power_good;
iface->power_lost = _control_power_on_signal_power_lost;
iface->get_pgood = control_power_skeleton_get_pgood;
iface->get_state = control_power_skeleton_get_state;
}
/**
* control_power_skeleton_new:
*
* Creates a skeleton object for the D-Bus interface <link linkend="gdbus-interface-org-openbmc-control-Power.top_of_page">org.openbmc.control.Power</link>.
*
* Returns: (transfer full) (type ControlPowerSkeleton): The skeleton object.
*/
ControlPower *
control_power_skeleton_new (void)
{
return CONTROL_POWER (g_object_new (TYPE_CONTROL_POWER_SKELETON, NULL));
}
/* ------------------------------------------------------------------------
* Code for interface org.openbmc.EventLog
* ------------------------------------------------------------------------
*/
/**
* SECTION:EventLog
* @title: EventLog
* @short_description: Generated C code for the org.openbmc.EventLog D-Bus interface
*
* This section contains code for working with the <link linkend="gdbus-interface-org-openbmc-EventLog.top_of_page">org.openbmc.EventLog</link> D-Bus interface in C.
*/
/* ---- Introspection data for org.openbmc.EventLog ---- */
static const _ExtendedGDBusArgInfo _event_log_signal_info_event_log_ARG_message =
{
{
-1,
(gchar *) "message",
(gchar *) "a{ss}",
NULL
},
FALSE
};
static const _ExtendedGDBusArgInfo * const _event_log_signal_info_event_log_ARG_pointers[] =
{
&_event_log_signal_info_event_log_ARG_message,
NULL
};
static const _ExtendedGDBusSignalInfo _event_log_signal_info_event_log =
{
{
-1,
(gchar *) "EventLog",
(GDBusArgInfo **) &_event_log_signal_info_event_log_ARG_pointers,
NULL
},
"event-log"
};
static const _ExtendedGDBusSignalInfo * const _event_log_signal_info_pointers[] =
{
&_event_log_signal_info_event_log,
NULL
};
static const _ExtendedGDBusInterfaceInfo _event_log_interface_info =
{
{
-1,
(gchar *) "org.openbmc.EventLog",
NULL,
(GDBusSignalInfo **) &_event_log_signal_info_pointers,
NULL,
NULL
},
"event-log",
};
/**
* event_log_interface_info:
*
* Gets a machine-readable description of the <link linkend="gdbus-interface-org-openbmc-EventLog.top_of_page">org.openbmc.EventLog</link> D-Bus interface.
*
* Returns: (transfer none): A #GDBusInterfaceInfo. Do not free.
*/
GDBusInterfaceInfo *
event_log_interface_info (void)
{
return (GDBusInterfaceInfo *) &_event_log_interface_info.parent_struct;
}
/**
* event_log_override_properties:
* @klass: The class structure for a #GObject<!-- -->-derived class.
* @property_id_begin: The property id to assign to the first overridden property.
*
* Overrides all #GObject properties in the #EventLog interface for a concrete class.
* The properties are overridden in the order they are defined.
*
* Returns: The last property id.
*/
guint
event_log_override_properties (GObjectClass *klass, guint property_id_begin)
{
return property_id_begin - 1;
}
/**
* EventLog:
*
* Abstract interface type for the D-Bus interface <link linkend="gdbus-interface-org-openbmc-EventLog.top_of_page">org.openbmc.EventLog</link>.
*/
/**
* EventLogIface:
* @parent_iface: The parent interface.
* @event_log: Handler for the #EventLog::event-log signal.
*
* Virtual table for the D-Bus interface <link linkend="gdbus-interface-org-openbmc-EventLog.top_of_page">org.openbmc.EventLog</link>.
*/
typedef EventLogIface EventLogInterface;
G_DEFINE_INTERFACE (EventLog, event_log, G_TYPE_OBJECT);
static void
event_log_default_init (EventLogIface *iface)
{
/* GObject signals for received D-Bus signals: */
/**
* EventLog::event-log:
* @object: A #EventLog.
* @arg_message: Argument.
*
* On the client-side, this signal is emitted whenever the D-Bus signal <link linkend="gdbus-signal-org-openbmc-EventLog.EventLog">"EventLog"</link> is received.
*
* On the service-side, this signal can be used with e.g. g_signal_emit_by_name() to make the object emit the D-Bus signal.
*/
g_signal_new ("event-log",
G_TYPE_FROM_INTERFACE (iface),
G_SIGNAL_RUN_LAST,
G_STRUCT_OFFSET (EventLogIface, event_log),
NULL,
NULL,
g_cclosure_marshal_generic,
G_TYPE_NONE,
1, G_TYPE_VARIANT);
}
/**
* event_log_emit_event_log:
* @object: A #EventLog.
* @arg_message: Argument to pass with the signal.
*
* Emits the <link linkend="gdbus-signal-org-openbmc-EventLog.EventLog">"EventLog"</link> D-Bus signal.
*/
void
event_log_emit_event_log (
EventLog *object,
GVariant *arg_message)
{
g_signal_emit_by_name (object, "event-log", arg_message);
}
/* ------------------------------------------------------------------------ */
/**
* EventLogProxy:
*
* The #EventLogProxy structure contains only private data and should only be accessed using the provided API.
*/
/**
* EventLogProxyClass:
* @parent_class: The parent class.
*
* Class structure for #EventLogProxy.
*/
struct _EventLogProxyPrivate
{
GData *qdata;
};
static void event_log_proxy_iface_init (EventLogIface *iface);
#if GLIB_VERSION_MAX_ALLOWED >= GLIB_VERSION_2_38
G_DEFINE_TYPE_WITH_CODE (EventLogProxy, event_log_proxy, G_TYPE_DBUS_PROXY,
G_ADD_PRIVATE (EventLogProxy)
G_IMPLEMENT_INTERFACE (TYPE_EVENT_LOG, event_log_proxy_iface_init));
#else
G_DEFINE_TYPE_WITH_CODE (EventLogProxy, event_log_proxy, G_TYPE_DBUS_PROXY,
G_IMPLEMENT_INTERFACE (TYPE_EVENT_LOG, event_log_proxy_iface_init));
#endif
static void
event_log_proxy_finalize (GObject *object)
{
EventLogProxy *proxy = EVENT_LOG_PROXY (object);
g_datalist_clear (&proxy->priv->qdata);
G_OBJECT_CLASS (event_log_proxy_parent_class)->finalize (object);
}
static void
event_log_proxy_get_property (GObject *object,
guint prop_id,
GValue *value,
GParamSpec *pspec G_GNUC_UNUSED)
{
}
static void
event_log_proxy_set_property (GObject *object,
guint prop_id,
const GValue *value,
GParamSpec *pspec G_GNUC_UNUSED)
{
}
static void
event_log_proxy_g_signal (GDBusProxy *proxy,
const gchar *sender_name G_GNUC_UNUSED,
const gchar *signal_name,
GVariant *parameters)
{
_ExtendedGDBusSignalInfo *info;
GVariantIter iter;
GVariant *child;
GValue *paramv;
guint num_params;
guint n;
guint signal_id;
info = (_ExtendedGDBusSignalInfo *) g_dbus_interface_info_lookup_signal ((GDBusInterfaceInfo *) &_event_log_interface_info.parent_struct, signal_name);
if (info == NULL)
return;
num_params = g_variant_n_children (parameters);
paramv = g_new0 (GValue, num_params + 1);
g_value_init (&paramv[0], TYPE_EVENT_LOG);
g_value_set_object (&paramv[0], proxy);
g_variant_iter_init (&iter, parameters);
n = 1;
while ((child = g_variant_iter_next_value (&iter)) != NULL)
{
_ExtendedGDBusArgInfo *arg_info = (_ExtendedGDBusArgInfo *) info->parent_struct.args[n - 1];
if (arg_info->use_gvariant)
{
g_value_init (&paramv[n], G_TYPE_VARIANT);
g_value_set_variant (&paramv[n], child);
n++;
}
else
g_dbus_gvariant_to_gvalue (child, &paramv[n++]);
g_variant_unref (child);
}
signal_id = g_signal_lookup (info->signal_name, TYPE_EVENT_LOG);
g_signal_emitv (paramv, signal_id, 0, NULL);
for (n = 0; n < num_params + 1; n++)
g_value_unset (&paramv[n]);
g_free (paramv);
}
static void
event_log_proxy_g_properties_changed (GDBusProxy *_proxy,
GVariant *changed_properties,
const gchar *const *invalidated_properties)
{
EventLogProxy *proxy = EVENT_LOG_PROXY (_proxy);
guint n;
const gchar *key;
GVariantIter *iter;
_ExtendedGDBusPropertyInfo *info;
g_variant_get (changed_properties, "a{sv}", &iter);
while (g_variant_iter_next (iter, "{&sv}", &key, NULL))
{
info = (_ExtendedGDBusPropertyInfo *) g_dbus_interface_info_lookup_property ((GDBusInterfaceInfo *) &_event_log_interface_info.parent_struct, key);
g_datalist_remove_data (&proxy->priv->qdata, key);
if (info != NULL)
g_object_notify (G_OBJECT (proxy), info->hyphen_name);
}
g_variant_iter_free (iter);
for (n = 0; invalidated_properties[n] != NULL; n++)
{
info = (_ExtendedGDBusPropertyInfo *) g_dbus_interface_info_lookup_property ((GDBusInterfaceInfo *) &_event_log_interface_info.parent_struct, invalidated_properties[n]);
g_datalist_remove_data (&proxy->priv->qdata, invalidated_properties[n]);
if (info != NULL)
g_object_notify (G_OBJECT (proxy), info->hyphen_name);
}
}
static void
event_log_proxy_init (EventLogProxy *proxy)
{
#if GLIB_VERSION_MAX_ALLOWED >= GLIB_VERSION_2_38
proxy->priv = event_log_proxy_get_instance_private (proxy);
#else
proxy->priv = G_TYPE_INSTANCE_GET_PRIVATE (proxy, TYPE_EVENT_LOG_PROXY, EventLogProxyPrivate);
#endif
g_dbus_proxy_set_interface_info (G_DBUS_PROXY (proxy), event_log_interface_info ());
}
static void
event_log_proxy_class_init (EventLogProxyClass *klass)
{
GObjectClass *gobject_class;
GDBusProxyClass *proxy_class;
gobject_class = G_OBJECT_CLASS (klass);
gobject_class->finalize = event_log_proxy_finalize;
gobject_class->get_property = event_log_proxy_get_property;
gobject_class->set_property = event_log_proxy_set_property;
proxy_class = G_DBUS_PROXY_CLASS (klass);
proxy_class->g_signal = event_log_proxy_g_signal;
proxy_class->g_properties_changed = event_log_proxy_g_properties_changed;
#if GLIB_VERSION_MAX_ALLOWED < GLIB_VERSION_2_38
g_type_class_add_private (klass, sizeof (EventLogProxyPrivate));
#endif
}
static void
event_log_proxy_iface_init (EventLogIface *iface)
{
}
/**
* event_log_proxy_new:
* @connection: A #GDBusConnection.
* @flags: Flags from the #GDBusProxyFlags enumeration.
* @name: (allow-none): A bus name (well-known or unique) or %NULL if @connection is not a message bus connection.
* @object_path: An object path.
* @cancellable: (allow-none): A #GCancellable or %NULL.
* @callback: A #GAsyncReadyCallback to call when the request is satisfied.
* @user_data: User data to pass to @callback.
*
* Asynchronously creates a proxy for the D-Bus interface <link linkend="gdbus-interface-org-openbmc-EventLog.top_of_page">org.openbmc.EventLog</link>. See g_dbus_proxy_new() for more details.
*
* When the operation is finished, @callback will be invoked in the <link linkend="g-main-context-push-thread-default">thread-default main loop</link> of the thread you are calling this method from.
* You can then call event_log_proxy_new_finish() to get the result of the operation.
*
* See event_log_proxy_new_sync() for the synchronous, blocking version of this constructor.
*/
void
event_log_proxy_new (
GDBusConnection *connection,
GDBusProxyFlags flags,
const gchar *name,
const gchar *object_path,
GCancellable *cancellable,
GAsyncReadyCallback callback,
gpointer user_data)
{
g_async_initable_new_async (TYPE_EVENT_LOG_PROXY, G_PRIORITY_DEFAULT, cancellable, callback, user_data, "g-flags", flags, "g-name", name, "g-connection", connection, "g-object-path", object_path, "g-interface-name", "org.openbmc.EventLog", NULL);
}
/**
* event_log_proxy_new_finish:
* @res: The #GAsyncResult obtained from the #GAsyncReadyCallback passed to event_log_proxy_new().
* @error: Return location for error or %NULL
*
* Finishes an operation started with event_log_proxy_new().
*
* Returns: (transfer full) (type EventLogProxy): The constructed proxy object or %NULL if @error is set.
*/
EventLog *
event_log_proxy_new_finish (
GAsyncResult *res,
GError **error)
{
GObject *ret;
GObject *source_object;
source_object = g_async_result_get_source_object (res);
ret = g_async_initable_new_finish (G_ASYNC_INITABLE (source_object), res, error);
g_object_unref (source_object);
if (ret != NULL)
return EVENT_LOG (ret);
else
return NULL;
}
/**
* event_log_proxy_new_sync:
* @connection: A #GDBusConnection.
* @flags: Flags from the #GDBusProxyFlags enumeration.
* @name: (allow-none): A bus name (well-known or unique) or %NULL if @connection is not a message bus connection.
* @object_path: An object path.
* @cancellable: (allow-none): A #GCancellable or %NULL.
* @error: Return location for error or %NULL
*
* Synchronously creates a proxy for the D-Bus interface <link linkend="gdbus-interface-org-openbmc-EventLog.top_of_page">org.openbmc.EventLog</link>. See g_dbus_proxy_new_sync() for more details.
*
* The calling thread is blocked until a reply is received.
*
* See event_log_proxy_new() for the asynchronous version of this constructor.
*
* Returns: (transfer full) (type EventLogProxy): The constructed proxy object or %NULL if @error is set.
*/
EventLog *
event_log_proxy_new_sync (
GDBusConnection *connection,
GDBusProxyFlags flags,
const gchar *name,
const gchar *object_path,
GCancellable *cancellable,
GError **error)
{
GInitable *ret;
ret = g_initable_new (TYPE_EVENT_LOG_PROXY, cancellable, error, "g-flags", flags, "g-name", name, "g-connection", connection, "g-object-path", object_path, "g-interface-name", "org.openbmc.EventLog", NULL);
if (ret != NULL)
return EVENT_LOG (ret);
else
return NULL;
}
/**
* event_log_proxy_new_for_bus:
* @bus_type: A #GBusType.
* @flags: Flags from the #GDBusProxyFlags enumeration.
* @name: A bus name (well-known or unique).
* @object_path: An object path.
* @cancellable: (allow-none): A #GCancellable or %NULL.
* @callback: A #GAsyncReadyCallback to call when the request is satisfied.
* @user_data: User data to pass to @callback.
*
* Like event_log_proxy_new() but takes a #GBusType instead of a #GDBusConnection.
*
* When the operation is finished, @callback will be invoked in the <link linkend="g-main-context-push-thread-default">thread-default main loop</link> of the thread you are calling this method from.
* You can then call event_log_proxy_new_for_bus_finish() to get the result of the operation.
*
* See event_log_proxy_new_for_bus_sync() for the synchronous, blocking version of this constructor.
*/
void
event_log_proxy_new_for_bus (
GBusType bus_type,
GDBusProxyFlags flags,
const gchar *name,
const gchar *object_path,
GCancellable *cancellable,
GAsyncReadyCallback callback,
gpointer user_data)
{
g_async_initable_new_async (TYPE_EVENT_LOG_PROXY, G_PRIORITY_DEFAULT, cancellable, callback, user_data, "g-flags", flags, "g-name", name, "g-bus-type", bus_type, "g-object-path", object_path, "g-interface-name", "org.openbmc.EventLog", NULL);
}
/**
* event_log_proxy_new_for_bus_finish:
* @res: The #GAsyncResult obtained from the #GAsyncReadyCallback passed to event_log_proxy_new_for_bus().
* @error: Return location for error or %NULL
*
* Finishes an operation started with event_log_proxy_new_for_bus().
*
* Returns: (transfer full) (type EventLogProxy): The constructed proxy object or %NULL if @error is set.
*/
EventLog *
event_log_proxy_new_for_bus_finish (
GAsyncResult *res,
GError **error)
{
GObject *ret;
GObject *source_object;
source_object = g_async_result_get_source_object (res);
ret = g_async_initable_new_finish (G_ASYNC_INITABLE (source_object), res, error);
g_object_unref (source_object);
if (ret != NULL)
return EVENT_LOG (ret);
else
return NULL;
}
/**
* event_log_proxy_new_for_bus_sync:
* @bus_type: A #GBusType.
* @flags: Flags from the #GDBusProxyFlags enumeration.
* @name: A bus name (well-known or unique).
* @object_path: An object path.
* @cancellable: (allow-none): A #GCancellable or %NULL.
* @error: Return location for error or %NULL
*
* Like event_log_proxy_new_sync() but takes a #GBusType instead of a #GDBusConnection.
*
* The calling thread is blocked until a reply is received.
*
* See event_log_proxy_new_for_bus() for the asynchronous version of this constructor.
*
* Returns: (transfer full) (type EventLogProxy): The constructed proxy object or %NULL if @error is set.
*/
EventLog *
event_log_proxy_new_for_bus_sync (
GBusType bus_type,
GDBusProxyFlags flags,
const gchar *name,
const gchar *object_path,
GCancellable *cancellable,
GError **error)
{
GInitable *ret;
ret = g_initable_new (TYPE_EVENT_LOG_PROXY, cancellable, error, "g-flags", flags, "g-name", name, "g-bus-type", bus_type, "g-object-path", object_path, "g-interface-name", "org.openbmc.EventLog", NULL);
if (ret != NULL)
return EVENT_LOG (ret);
else
return NULL;
}
/* ------------------------------------------------------------------------ */
/**
* EventLogSkeleton:
*
* The #EventLogSkeleton structure contains only private data and should only be accessed using the provided API.
*/
/**
* EventLogSkeletonClass:
* @parent_class: The parent class.
*
* Class structure for #EventLogSkeleton.
*/
struct _EventLogSkeletonPrivate
{
GValue *properties;
GList *changed_properties;
GSource *changed_properties_idle_source;
GMainContext *context;
GMutex lock;
};
static void
_event_log_skeleton_handle_method_call (
GDBusConnection *connection G_GNUC_UNUSED,
const gchar *sender G_GNUC_UNUSED,
const gchar *object_path G_GNUC_UNUSED,
const gchar *interface_name,
const gchar *method_name,
GVariant *parameters,
GDBusMethodInvocation *invocation,
gpointer user_data)
{
EventLogSkeleton *skeleton = EVENT_LOG_SKELETON (user_data);
_ExtendedGDBusMethodInfo *info;
GVariantIter iter;
GVariant *child;
GValue *paramv;
guint num_params;
guint num_extra;
guint n;
guint signal_id;
GValue return_value = G_VALUE_INIT;
info = (_ExtendedGDBusMethodInfo *) g_dbus_method_invocation_get_method_info (invocation);
g_assert (info != NULL);
num_params = g_variant_n_children (parameters);
num_extra = info->pass_fdlist ? 3 : 2; paramv = g_new0 (GValue, num_params + num_extra);
n = 0;
g_value_init (&paramv[n], TYPE_EVENT_LOG);
g_value_set_object (&paramv[n++], skeleton);
g_value_init (&paramv[n], G_TYPE_DBUS_METHOD_INVOCATION);
g_value_set_object (&paramv[n++], invocation);
if (info->pass_fdlist)
{
#ifdef G_OS_UNIX
g_value_init (&paramv[n], G_TYPE_UNIX_FD_LIST);
g_value_set_object (&paramv[n++], g_dbus_message_get_unix_fd_list (g_dbus_method_invocation_get_message (invocation)));
#else
g_assert_not_reached ();
#endif
}
g_variant_iter_init (&iter, parameters);
while ((child = g_variant_iter_next_value (&iter)) != NULL)
{
_ExtendedGDBusArgInfo *arg_info = (_ExtendedGDBusArgInfo *) info->parent_struct.in_args[n - num_extra];
if (arg_info->use_gvariant)
{
g_value_init (&paramv[n], G_TYPE_VARIANT);
g_value_set_variant (&paramv[n], child);
n++;
}
else
g_dbus_gvariant_to_gvalue (child, &paramv[n++]);
g_variant_unref (child);
}
signal_id = g_signal_lookup (info->signal_name, TYPE_EVENT_LOG);
g_value_init (&return_value, G_TYPE_BOOLEAN);
g_signal_emitv (paramv, signal_id, 0, &return_value);
if (!g_value_get_boolean (&return_value))
g_dbus_method_invocation_return_error (invocation, G_DBUS_ERROR, G_DBUS_ERROR_UNKNOWN_METHOD, "Method %s is not implemented on interface %s", method_name, interface_name);
g_value_unset (&return_value);
for (n = 0; n < num_params + num_extra; n++)
g_value_unset (&paramv[n]);
g_free (paramv);
}
static GVariant *
_event_log_skeleton_handle_get_property (
GDBusConnection *connection G_GNUC_UNUSED,
const gchar *sender G_GNUC_UNUSED,
const gchar *object_path G_GNUC_UNUSED,
const gchar *interface_name G_GNUC_UNUSED,
const gchar *property_name,
GError **error,
gpointer user_data)
{
EventLogSkeleton *skeleton = EVENT_LOG_SKELETON (user_data);
GValue value = G_VALUE_INIT;
GParamSpec *pspec;
_ExtendedGDBusPropertyInfo *info;
GVariant *ret;
ret = NULL;
info = (_ExtendedGDBusPropertyInfo *) g_dbus_interface_info_lookup_property ((GDBusInterfaceInfo *) &_event_log_interface_info.parent_struct, property_name);
g_assert (info != NULL);
pspec = g_object_class_find_property (G_OBJECT_GET_CLASS (skeleton), info->hyphen_name);
if (pspec == NULL)
{
g_set_error (error, G_DBUS_ERROR, G_DBUS_ERROR_INVALID_ARGS, "No property with name %s", property_name);
}
else
{
g_value_init (&value, pspec->value_type);
g_object_get_property (G_OBJECT (skeleton), info->hyphen_name, &value);
ret = g_dbus_gvalue_to_gvariant (&value, G_VARIANT_TYPE (info->parent_struct.signature));
g_value_unset (&value);
}
return ret;
}
static gboolean
_event_log_skeleton_handle_set_property (
GDBusConnection *connection G_GNUC_UNUSED,
const gchar *sender G_GNUC_UNUSED,
const gchar *object_path G_GNUC_UNUSED,
const gchar *interface_name G_GNUC_UNUSED,
const gchar *property_name,
GVariant *variant,
GError **error,
gpointer user_data)
{
EventLogSkeleton *skeleton = EVENT_LOG_SKELETON (user_data);
GValue value = G_VALUE_INIT;
GParamSpec *pspec;
_ExtendedGDBusPropertyInfo *info;
gboolean ret;
ret = FALSE;
info = (_ExtendedGDBusPropertyInfo *) g_dbus_interface_info_lookup_property ((GDBusInterfaceInfo *) &_event_log_interface_info.parent_struct, property_name);
g_assert (info != NULL);
pspec = g_object_class_find_property (G_OBJECT_GET_CLASS (skeleton), info->hyphen_name);
if (pspec == NULL)
{
g_set_error (error, G_DBUS_ERROR, G_DBUS_ERROR_INVALID_ARGS, "No property with name %s", property_name);
}
else
{
if (info->use_gvariant)
g_value_set_variant (&value, variant);
else
g_dbus_gvariant_to_gvalue (variant, &value);
g_object_set_property (G_OBJECT (skeleton), info->hyphen_name, &value);
g_value_unset (&value);
ret = TRUE;
}
return ret;
}
static const GDBusInterfaceVTable _event_log_skeleton_vtable =
{
_event_log_skeleton_handle_method_call,
_event_log_skeleton_handle_get_property,
_event_log_skeleton_handle_set_property,
{NULL}
};
static GDBusInterfaceInfo *
event_log_skeleton_dbus_interface_get_info (GDBusInterfaceSkeleton *skeleton G_GNUC_UNUSED)
{
return event_log_interface_info ();
}
static GDBusInterfaceVTable *
event_log_skeleton_dbus_interface_get_vtable (GDBusInterfaceSkeleton *skeleton G_GNUC_UNUSED)
{
return (GDBusInterfaceVTable *) &_event_log_skeleton_vtable;
}
static GVariant *
event_log_skeleton_dbus_interface_get_properties (GDBusInterfaceSkeleton *_skeleton)
{
EventLogSkeleton *skeleton = EVENT_LOG_SKELETON (_skeleton);
GVariantBuilder builder;
guint n;
g_variant_builder_init (&builder, G_VARIANT_TYPE ("a{sv}"));
if (_event_log_interface_info.parent_struct.properties == NULL)
goto out;
for (n = 0; _event_log_interface_info.parent_struct.properties[n] != NULL; n++)
{
GDBusPropertyInfo *info = _event_log_interface_info.parent_struct.properties[n];
if (info->flags & G_DBUS_PROPERTY_INFO_FLAGS_READABLE)
{
GVariant *value;
value = _event_log_skeleton_handle_get_property (g_dbus_interface_skeleton_get_connection (G_DBUS_INTERFACE_SKELETON (skeleton)), NULL, g_dbus_interface_skeleton_get_object_path (G_DBUS_INTERFACE_SKELETON (skeleton)), "org.openbmc.EventLog", info->name, NULL, skeleton);
if (value != NULL)
{
g_variant_take_ref (value);
g_variant_builder_add (&builder, "{sv}", info->name, value);
g_variant_unref (value);
}
}
}
out:
return g_variant_builder_end (&builder);
}
static void
event_log_skeleton_dbus_interface_flush (GDBusInterfaceSkeleton *_skeleton)
{
}
static void
_event_log_on_signal_event_log (
EventLog *object,
GVariant *arg_message)
{
EventLogSkeleton *skeleton = EVENT_LOG_SKELETON (object);
GList *connections, *l;
GVariant *signal_variant;
connections = g_dbus_interface_skeleton_get_connections (G_DBUS_INTERFACE_SKELETON (skeleton));
signal_variant = g_variant_ref_sink (g_variant_new ("(@a{ss})",
arg_message));
for (l = connections; l != NULL; l = l->next)
{
GDBusConnection *connection = l->data;
g_dbus_connection_emit_signal (connection,
NULL, g_dbus_interface_skeleton_get_object_path (G_DBUS_INTERFACE_SKELETON (skeleton)), "org.openbmc.EventLog", "EventLog",
signal_variant, NULL);
}
g_variant_unref (signal_variant);
g_list_free_full (connections, g_object_unref);
}
static void event_log_skeleton_iface_init (EventLogIface *iface);
#if GLIB_VERSION_MAX_ALLOWED >= GLIB_VERSION_2_38
G_DEFINE_TYPE_WITH_CODE (EventLogSkeleton, event_log_skeleton, G_TYPE_DBUS_INTERFACE_SKELETON,
G_ADD_PRIVATE (EventLogSkeleton)
G_IMPLEMENT_INTERFACE (TYPE_EVENT_LOG, event_log_skeleton_iface_init));
#else
G_DEFINE_TYPE_WITH_CODE (EventLogSkeleton, event_log_skeleton, G_TYPE_DBUS_INTERFACE_SKELETON,
G_IMPLEMENT_INTERFACE (TYPE_EVENT_LOG, event_log_skeleton_iface_init));
#endif
static void
event_log_skeleton_finalize (GObject *object)
{
EventLogSkeleton *skeleton = EVENT_LOG_SKELETON (object);
g_list_free_full (skeleton->priv->changed_properties, (GDestroyNotify) _changed_property_free);
if (skeleton->priv->changed_properties_idle_source != NULL)
g_source_destroy (skeleton->priv->changed_properties_idle_source);
g_main_context_unref (skeleton->priv->context);
g_mutex_clear (&skeleton->priv->lock);
G_OBJECT_CLASS (event_log_skeleton_parent_class)->finalize (object);
}
static void
event_log_skeleton_init (EventLogSkeleton *skeleton)
{
#if GLIB_VERSION_MAX_ALLOWED >= GLIB_VERSION_2_38
skeleton->priv = event_log_skeleton_get_instance_private (skeleton);
#else
skeleton->priv = G_TYPE_INSTANCE_GET_PRIVATE (skeleton, TYPE_EVENT_LOG_SKELETON, EventLogSkeletonPrivate);
#endif
g_mutex_init (&skeleton->priv->lock);
skeleton->priv->context = g_main_context_ref_thread_default ();
}
static void
event_log_skeleton_class_init (EventLogSkeletonClass *klass)
{
GObjectClass *gobject_class;
GDBusInterfaceSkeletonClass *skeleton_class;
gobject_class = G_OBJECT_CLASS (klass);
gobject_class->finalize = event_log_skeleton_finalize;
skeleton_class = G_DBUS_INTERFACE_SKELETON_CLASS (klass);
skeleton_class->get_info = event_log_skeleton_dbus_interface_get_info;
skeleton_class->get_properties = event_log_skeleton_dbus_interface_get_properties;
skeleton_class->flush = event_log_skeleton_dbus_interface_flush;
skeleton_class->get_vtable = event_log_skeleton_dbus_interface_get_vtable;
#if GLIB_VERSION_MAX_ALLOWED < GLIB_VERSION_2_38
g_type_class_add_private (klass, sizeof (EventLogSkeletonPrivate));
#endif
}
static void
event_log_skeleton_iface_init (EventLogIface *iface)
{
iface->event_log = _event_log_on_signal_event_log;
}
/**
* event_log_skeleton_new:
*
* Creates a skeleton object for the D-Bus interface <link linkend="gdbus-interface-org-openbmc-EventLog.top_of_page">org.openbmc.EventLog</link>.
*
* Returns: (transfer full) (type EventLogSkeleton): The skeleton object.
*/
EventLog *
event_log_skeleton_new (void)
{
return EVENT_LOG (g_object_new (TYPE_EVENT_LOG_SKELETON, NULL));
}
/* ------------------------------------------------------------------------
* Code for Object, ObjectProxy and ObjectSkeleton
* ------------------------------------------------------------------------
*/
/**
* SECTION:Object
* @title: Object
* @short_description: Specialized GDBusObject types
*
* This section contains the #Object, #ObjectProxy, and #ObjectSkeleton types which make it easier to work with objects implementing generated types for D-Bus interfaces.
*/
/**
* Object:
*
* The #Object type is a specialized container of interfaces.
*/
/**
* ObjectIface:
* @parent_iface: The parent interface.
*
* Virtual table for the #Object interface.
*/
typedef ObjectIface ObjectInterface;
G_DEFINE_INTERFACE_WITH_CODE (Object, object, G_TYPE_OBJECT, g_type_interface_add_prerequisite (g_define_type_id, G_TYPE_DBUS_OBJECT));
static void
object_default_init (ObjectIface *iface)
{
/**
* Object:control:
*
* The #Control instance corresponding to the D-Bus interface <link linkend="gdbus-interface-org-openbmc-Control.top_of_page">org.openbmc.Control</link>, if any.
*
* Connect to the #GObject::notify signal to get informed of property changes.
*/
g_object_interface_install_property (iface, g_param_spec_object ("control", "control", "control", TYPE_CONTROL, G_PARAM_READWRITE|G_PARAM_STATIC_STRINGS));
/**
* Object:control-host:
*
* The #ControlHost instance corresponding to the D-Bus interface <link linkend="gdbus-interface-org-openbmc-control-Host.top_of_page">org.openbmc.control.Host</link>, if any.
*
* Connect to the #GObject::notify signal to get informed of property changes.
*/
g_object_interface_install_property (iface, g_param_spec_object ("control-host", "control-host", "control-host", TYPE_CONTROL_HOST, G_PARAM_READWRITE|G_PARAM_STATIC_STRINGS));
/**
* Object:control-power:
*
* The #ControlPower instance corresponding to the D-Bus interface <link linkend="gdbus-interface-org-openbmc-control-Power.top_of_page">org.openbmc.control.Power</link>, if any.
*
* Connect to the #GObject::notify signal to get informed of property changes.
*/
g_object_interface_install_property (iface, g_param_spec_object ("control-power", "control-power", "control-power", TYPE_CONTROL_POWER, G_PARAM_READWRITE|G_PARAM_STATIC_STRINGS));
/**
* Object:event-log:
*
* The #EventLog instance corresponding to the D-Bus interface <link linkend="gdbus-interface-org-openbmc-EventLog.top_of_page">org.openbmc.EventLog</link>, if any.
*
* Connect to the #GObject::notify signal to get informed of property changes.
*/
g_object_interface_install_property (iface, g_param_spec_object ("event-log", "event-log", "event-log", TYPE_EVENT_LOG, G_PARAM_READWRITE|G_PARAM_STATIC_STRINGS));
}
/**
* object_get_control:
* @object: A #Object.
*
* Gets the #Control instance for the D-Bus interface <link linkend="gdbus-interface-org-openbmc-Control.top_of_page">org.openbmc.Control</link> on @object, if any.
*
* Returns: (transfer full): A #Control that must be freed with g_object_unref() or %NULL if @object does not implement the interface.
*/
Control *object_get_control (Object *object)
{
GDBusInterface *ret;
ret = g_dbus_object_get_interface (G_DBUS_OBJECT (object), "org.openbmc.Control");
if (ret == NULL)
return NULL;
return CONTROL (ret);
}
/**
* object_get_control_host:
* @object: A #Object.
*
* Gets the #ControlHost instance for the D-Bus interface <link linkend="gdbus-interface-org-openbmc-control-Host.top_of_page">org.openbmc.control.Host</link> on @object, if any.
*
* Returns: (transfer full): A #ControlHost that must be freed with g_object_unref() or %NULL if @object does not implement the interface.
*/
ControlHost *object_get_control_host (Object *object)
{
GDBusInterface *ret;
ret = g_dbus_object_get_interface (G_DBUS_OBJECT (object), "org.openbmc.control.Host");
if (ret == NULL)
return NULL;
return CONTROL_HOST (ret);
}
/**
* object_get_control_power:
* @object: A #Object.
*
* Gets the #ControlPower instance for the D-Bus interface <link linkend="gdbus-interface-org-openbmc-control-Power.top_of_page">org.openbmc.control.Power</link> on @object, if any.
*
* Returns: (transfer full): A #ControlPower that must be freed with g_object_unref() or %NULL if @object does not implement the interface.
*/
ControlPower *object_get_control_power (Object *object)
{
GDBusInterface *ret;
ret = g_dbus_object_get_interface (G_DBUS_OBJECT (object), "org.openbmc.control.Power");
if (ret == NULL)
return NULL;
return CONTROL_POWER (ret);
}
/**
* object_get_event_log:
* @object: A #Object.
*
* Gets the #EventLog instance for the D-Bus interface <link linkend="gdbus-interface-org-openbmc-EventLog.top_of_page">org.openbmc.EventLog</link> on @object, if any.
*
* Returns: (transfer full): A #EventLog that must be freed with g_object_unref() or %NULL if @object does not implement the interface.
*/
EventLog *object_get_event_log (Object *object)
{
GDBusInterface *ret;
ret = g_dbus_object_get_interface (G_DBUS_OBJECT (object), "org.openbmc.EventLog");
if (ret == NULL)
return NULL;
return EVENT_LOG (ret);
}
/**
* object_peek_control: (skip)
* @object: A #Object.
*
* Like object_get_control() but doesn't increase the reference count on the returned object.
*
* <warning>It is not safe to use the returned object if you are on another thread than the one where the #GDBusObjectManagerClient or #GDBusObjectManagerServer for @object is running.</warning>
*
* Returns: (transfer none): A #Control or %NULL if @object does not implement the interface. Do not free the returned object, it is owned by @object.
*/
Control *object_peek_control (Object *object)
{
GDBusInterface *ret;
ret = g_dbus_object_get_interface (G_DBUS_OBJECT (object), "org.openbmc.Control");
if (ret == NULL)
return NULL;
g_object_unref (ret);
return CONTROL (ret);
}
/**
* object_peek_control_host: (skip)
* @object: A #Object.
*
* Like object_get_control_host() but doesn't increase the reference count on the returned object.
*
* <warning>It is not safe to use the returned object if you are on another thread than the one where the #GDBusObjectManagerClient or #GDBusObjectManagerServer for @object is running.</warning>
*
* Returns: (transfer none): A #ControlHost or %NULL if @object does not implement the interface. Do not free the returned object, it is owned by @object.
*/
ControlHost *object_peek_control_host (Object *object)
{
GDBusInterface *ret;
ret = g_dbus_object_get_interface (G_DBUS_OBJECT (object), "org.openbmc.control.Host");
if (ret == NULL)
return NULL;
g_object_unref (ret);
return CONTROL_HOST (ret);
}
/**
* object_peek_control_power: (skip)
* @object: A #Object.
*
* Like object_get_control_power() but doesn't increase the reference count on the returned object.
*
* <warning>It is not safe to use the returned object if you are on another thread than the one where the #GDBusObjectManagerClient or #GDBusObjectManagerServer for @object is running.</warning>
*
* Returns: (transfer none): A #ControlPower or %NULL if @object does not implement the interface. Do not free the returned object, it is owned by @object.
*/
ControlPower *object_peek_control_power (Object *object)
{
GDBusInterface *ret;
ret = g_dbus_object_get_interface (G_DBUS_OBJECT (object), "org.openbmc.control.Power");
if (ret == NULL)
return NULL;
g_object_unref (ret);
return CONTROL_POWER (ret);
}
/**
* object_peek_event_log: (skip)
* @object: A #Object.
*
* Like object_get_event_log() but doesn't increase the reference count on the returned object.
*
* <warning>It is not safe to use the returned object if you are on another thread than the one where the #GDBusObjectManagerClient or #GDBusObjectManagerServer for @object is running.</warning>
*
* Returns: (transfer none): A #EventLog or %NULL if @object does not implement the interface. Do not free the returned object, it is owned by @object.
*/
EventLog *object_peek_event_log (Object *object)
{
GDBusInterface *ret;
ret = g_dbus_object_get_interface (G_DBUS_OBJECT (object), "org.openbmc.EventLog");
if (ret == NULL)
return NULL;
g_object_unref (ret);
return EVENT_LOG (ret);
}
static void
object_notify (GDBusObject *object, GDBusInterface *interface)
{
_ExtendedGDBusInterfaceInfo *info = (_ExtendedGDBusInterfaceInfo *) g_dbus_interface_get_info (interface);
/* info can be NULL if the other end is using a D-Bus interface we don't know
* anything about, for example old generated code in this process talking to
* newer generated code in the other process. */
if (info != NULL)
g_object_notify (G_OBJECT (object), info->hyphen_name);
}
/**
* ObjectProxy:
*
* The #ObjectProxy structure contains only private data and should only be accessed using the provided API.
*/
/**
* ObjectProxyClass:
* @parent_class: The parent class.
*
* Class structure for #ObjectProxy.
*/
static void
object_proxy__object_iface_init (ObjectIface *iface G_GNUC_UNUSED)
{
}
static void
object_proxy__g_dbus_object_iface_init (GDBusObjectIface *iface)
{
iface->interface_added = object_notify;
iface->interface_removed = object_notify;
}
G_DEFINE_TYPE_WITH_CODE (ObjectProxy, object_proxy, G_TYPE_DBUS_OBJECT_PROXY,
G_IMPLEMENT_INTERFACE (TYPE_OBJECT, object_proxy__object_iface_init)
G_IMPLEMENT_INTERFACE (G_TYPE_DBUS_OBJECT, object_proxy__g_dbus_object_iface_init));
static void
object_proxy_init (ObjectProxy *object G_GNUC_UNUSED)
{
}
static void
object_proxy_set_property (GObject *gobject,
guint prop_id,
const GValue *value G_GNUC_UNUSED,
GParamSpec *pspec)
{
G_OBJECT_WARN_INVALID_PROPERTY_ID (gobject, prop_id, pspec);
}
static void
object_proxy_get_property (GObject *gobject,
guint prop_id,
GValue *value,
GParamSpec *pspec)
{
ObjectProxy *object = OBJECT_PROXY (gobject);
GDBusInterface *interface;
switch (prop_id)
{
case 1:
interface = g_dbus_object_get_interface (G_DBUS_OBJECT (object), "org.openbmc.Control");
g_value_take_object (value, interface);
break;
case 2:
interface = g_dbus_object_get_interface (G_DBUS_OBJECT (object), "org.openbmc.control.Host");
g_value_take_object (value, interface);
break;
case 3:
interface = g_dbus_object_get_interface (G_DBUS_OBJECT (object), "org.openbmc.control.Power");
g_value_take_object (value, interface);
break;
case 4:
interface = g_dbus_object_get_interface (G_DBUS_OBJECT (object), "org.openbmc.EventLog");
g_value_take_object (value, interface);
break;
default:
G_OBJECT_WARN_INVALID_PROPERTY_ID (gobject, prop_id, pspec);
break;
}
}
static void
object_proxy_class_init (ObjectProxyClass *klass)
{
GObjectClass *gobject_class = G_OBJECT_CLASS (klass);
gobject_class->set_property = object_proxy_set_property;
gobject_class->get_property = object_proxy_get_property;
g_object_class_override_property (gobject_class, 1, "control");
g_object_class_override_property (gobject_class, 2, "control-host");
g_object_class_override_property (gobject_class, 3, "control-power");
g_object_class_override_property (gobject_class, 4, "event-log");
}
/**
* object_proxy_new:
* @connection: A #GDBusConnection.
* @object_path: An object path.
*
* Creates a new proxy object.
*
* Returns: (transfer full): The proxy object.
*/
ObjectProxy *
object_proxy_new (GDBusConnection *connection,
const gchar *object_path)
{
g_return_val_if_fail (G_IS_DBUS_CONNECTION (connection), NULL);
g_return_val_if_fail (g_variant_is_object_path (object_path), NULL);
return OBJECT_PROXY (g_object_new (TYPE_OBJECT_PROXY, "g-connection", connection, "g-object-path", object_path, NULL));
}
/**
* ObjectSkeleton:
*
* The #ObjectSkeleton structure contains only private data and should only be accessed using the provided API.
*/
/**
* ObjectSkeletonClass:
* @parent_class: The parent class.
*
* Class structure for #ObjectSkeleton.
*/
static void
object_skeleton__object_iface_init (ObjectIface *iface G_GNUC_UNUSED)
{
}
static void
object_skeleton__g_dbus_object_iface_init (GDBusObjectIface *iface)
{
iface->interface_added = object_notify;
iface->interface_removed = object_notify;
}
G_DEFINE_TYPE_WITH_CODE (ObjectSkeleton, object_skeleton, G_TYPE_DBUS_OBJECT_SKELETON,
G_IMPLEMENT_INTERFACE (TYPE_OBJECT, object_skeleton__object_iface_init)
G_IMPLEMENT_INTERFACE (G_TYPE_DBUS_OBJECT, object_skeleton__g_dbus_object_iface_init));
static void
object_skeleton_init (ObjectSkeleton *object G_GNUC_UNUSED)
{
}
static void
object_skeleton_set_property (GObject *gobject,
guint prop_id,
const GValue *value,
GParamSpec *pspec)
{
ObjectSkeleton *object = OBJECT_SKELETON (gobject);
GDBusInterfaceSkeleton *interface;
switch (prop_id)
{
case 1:
interface = g_value_get_object (value);
if (interface != NULL)
{
g_warn_if_fail (IS_CONTROL (interface));
g_dbus_object_skeleton_add_interface (G_DBUS_OBJECT_SKELETON (object), interface);
}
else
{
g_dbus_object_skeleton_remove_interface_by_name (G_DBUS_OBJECT_SKELETON (object), "org.openbmc.Control");
}
break;
case 2:
interface = g_value_get_object (value);
if (interface != NULL)
{
g_warn_if_fail (IS_CONTROL_HOST (interface));
g_dbus_object_skeleton_add_interface (G_DBUS_OBJECT_SKELETON (object), interface);
}
else
{
g_dbus_object_skeleton_remove_interface_by_name (G_DBUS_OBJECT_SKELETON (object), "org.openbmc.control.Host");
}
break;
case 3:
interface = g_value_get_object (value);
if (interface != NULL)
{
g_warn_if_fail (IS_CONTROL_POWER (interface));
g_dbus_object_skeleton_add_interface (G_DBUS_OBJECT_SKELETON (object), interface);
}
else
{
g_dbus_object_skeleton_remove_interface_by_name (G_DBUS_OBJECT_SKELETON (object), "org.openbmc.control.Power");
}
break;
case 4:
interface = g_value_get_object (value);
if (interface != NULL)
{
g_warn_if_fail (IS_EVENT_LOG (interface));
g_dbus_object_skeleton_add_interface (G_DBUS_OBJECT_SKELETON (object), interface);
}
else
{
g_dbus_object_skeleton_remove_interface_by_name (G_DBUS_OBJECT_SKELETON (object), "org.openbmc.EventLog");
}
break;
default:
G_OBJECT_WARN_INVALID_PROPERTY_ID (gobject, prop_id, pspec);
break;
}
}
static void
object_skeleton_get_property (GObject *gobject,
guint prop_id,
GValue *value,
GParamSpec *pspec)
{
ObjectSkeleton *object = OBJECT_SKELETON (gobject);
GDBusInterface *interface;
switch (prop_id)
{
case 1:
interface = g_dbus_object_get_interface (G_DBUS_OBJECT (object), "org.openbmc.Control");
g_value_take_object (value, interface);
break;
case 2:
interface = g_dbus_object_get_interface (G_DBUS_OBJECT (object), "org.openbmc.control.Host");
g_value_take_object (value, interface);
break;
case 3:
interface = g_dbus_object_get_interface (G_DBUS_OBJECT (object), "org.openbmc.control.Power");
g_value_take_object (value, interface);
break;
case 4:
interface = g_dbus_object_get_interface (G_DBUS_OBJECT (object), "org.openbmc.EventLog");
g_value_take_object (value, interface);
break;
default:
G_OBJECT_WARN_INVALID_PROPERTY_ID (gobject, prop_id, pspec);
break;
}
}
static void
object_skeleton_class_init (ObjectSkeletonClass *klass)
{
GObjectClass *gobject_class = G_OBJECT_CLASS (klass);
gobject_class->set_property = object_skeleton_set_property;
gobject_class->get_property = object_skeleton_get_property;
g_object_class_override_property (gobject_class, 1, "control");
g_object_class_override_property (gobject_class, 2, "control-host");
g_object_class_override_property (gobject_class, 3, "control-power");
g_object_class_override_property (gobject_class, 4, "event-log");
}
/**
* object_skeleton_new:
* @object_path: An object path.
*
* Creates a new skeleton object.
*
* Returns: (transfer full): The skeleton object.
*/
ObjectSkeleton *
object_skeleton_new (const gchar *object_path)
{
g_return_val_if_fail (g_variant_is_object_path (object_path), NULL);
return OBJECT_SKELETON (g_object_new (TYPE_OBJECT_SKELETON, "g-object-path", object_path, NULL));
}
/**
* object_skeleton_set_control:
* @object: A #ObjectSkeleton.
* @interface_: (allow-none): A #Control or %NULL to clear the interface.
*
* Sets the #Control instance for the D-Bus interface <link linkend="gdbus-interface-org-openbmc-Control.top_of_page">org.openbmc.Control</link> on @object.
*/
void object_skeleton_set_control (ObjectSkeleton *object, Control *interface_)
{
g_object_set (G_OBJECT (object), "control", interface_, NULL);
}
/**
* object_skeleton_set_control_host:
* @object: A #ObjectSkeleton.
* @interface_: (allow-none): A #ControlHost or %NULL to clear the interface.
*
* Sets the #ControlHost instance for the D-Bus interface <link linkend="gdbus-interface-org-openbmc-control-Host.top_of_page">org.openbmc.control.Host</link> on @object.
*/
void object_skeleton_set_control_host (ObjectSkeleton *object, ControlHost *interface_)
{
g_object_set (G_OBJECT (object), "control-host", interface_, NULL);
}
/**
* object_skeleton_set_control_power:
* @object: A #ObjectSkeleton.
* @interface_: (allow-none): A #ControlPower or %NULL to clear the interface.
*
* Sets the #ControlPower instance for the D-Bus interface <link linkend="gdbus-interface-org-openbmc-control-Power.top_of_page">org.openbmc.control.Power</link> on @object.
*/
void object_skeleton_set_control_power (ObjectSkeleton *object, ControlPower *interface_)
{
g_object_set (G_OBJECT (object), "control-power", interface_, NULL);
}
/**
* object_skeleton_set_event_log:
* @object: A #ObjectSkeleton.
* @interface_: (allow-none): A #EventLog or %NULL to clear the interface.
*
* Sets the #EventLog instance for the D-Bus interface <link linkend="gdbus-interface-org-openbmc-EventLog.top_of_page">org.openbmc.EventLog</link> on @object.
*/
void object_skeleton_set_event_log (ObjectSkeleton *object, EventLog *interface_)
{
g_object_set (G_OBJECT (object), "event-log", interface_, NULL);
}
/* ------------------------------------------------------------------------
* Code for ObjectManager client
* ------------------------------------------------------------------------
*/
/**
* SECTION:ObjectManagerClient
* @title: ObjectManagerClient
* @short_description: Generated GDBusObjectManagerClient type
*
* This section contains a #GDBusObjectManagerClient that uses object_manager_client_get_proxy_type() as the #GDBusProxyTypeFunc.
*/
/**
* ObjectManagerClient:
*
* The #ObjectManagerClient structure contains only private data and should only be accessed using the provided API.
*/
/**
* ObjectManagerClientClass:
* @parent_class: The parent class.
*
* Class structure for #ObjectManagerClient.
*/
G_DEFINE_TYPE (ObjectManagerClient, object_manager_client, G_TYPE_DBUS_OBJECT_MANAGER_CLIENT);
static void
object_manager_client_init (ObjectManagerClient *manager G_GNUC_UNUSED)
{
}
static void
object_manager_client_class_init (ObjectManagerClientClass *klass G_GNUC_UNUSED)
{
}
/**
* object_manager_client_get_proxy_type:
* @manager: A #GDBusObjectManagerClient.
* @object_path: The object path of the remote object (unused).
* @interface_name: (allow-none): Interface name of the remote object or %NULL to get the object proxy #GType.
* @user_data: User data (unused).
*
* A #GDBusProxyTypeFunc that maps @interface_name to the generated #GDBusObjectProxy<!-- -->- and #GDBusProxy<!-- -->-derived types.
*
* Returns: A #GDBusProxy<!-- -->-derived #GType if @interface_name is not %NULL, otherwise the #GType for #ObjectProxy.
*/
GType
object_manager_client_get_proxy_type (GDBusObjectManagerClient *manager G_GNUC_UNUSED, const gchar *object_path G_GNUC_UNUSED, const gchar *interface_name, gpointer user_data G_GNUC_UNUSED)
{
static gsize once_init_value = 0;
static GHashTable *lookup_hash;
GType ret;
if (interface_name == NULL)
return TYPE_OBJECT_PROXY;
if (g_once_init_enter (&once_init_value))
{
lookup_hash = g_hash_table_new (g_str_hash, g_str_equal);
g_hash_table_insert (lookup_hash, (gpointer) "org.openbmc.Control", GSIZE_TO_POINTER (TYPE_CONTROL_PROXY));
g_hash_table_insert (lookup_hash, (gpointer) "org.openbmc.control.Host", GSIZE_TO_POINTER (TYPE_CONTROL_HOST_PROXY));
g_hash_table_insert (lookup_hash, (gpointer) "org.openbmc.control.Power", GSIZE_TO_POINTER (TYPE_CONTROL_POWER_PROXY));
g_hash_table_insert (lookup_hash, (gpointer) "org.openbmc.EventLog", GSIZE_TO_POINTER (TYPE_EVENT_LOG_PROXY));
g_once_init_leave (&once_init_value, 1);
}
ret = (GType) GPOINTER_TO_SIZE (g_hash_table_lookup (lookup_hash, interface_name));
if (ret == (GType) 0)
ret = G_TYPE_DBUS_PROXY;
return ret;
}
/**
* object_manager_client_new:
* @connection: A #GDBusConnection.
* @flags: Flags from the #GDBusObjectManagerClientFlags enumeration.
* @name: (allow-none): A bus name (well-known or unique) or %NULL if @connection is not a message bus connection.
* @object_path: An object path.
* @cancellable: (allow-none): A #GCancellable or %NULL.
* @callback: A #GAsyncReadyCallback to call when the request is satisfied.
* @user_data: User data to pass to @callback.
*
* Asynchronously creates #GDBusObjectManagerClient using object_manager_client_get_proxy_type() as the #GDBusProxyTypeFunc. See g_dbus_object_manager_client_new() for more details.
*
* When the operation is finished, @callback will be invoked in the <link linkend="g-main-context-push-thread-default">thread-default main loop</link> of the thread you are calling this method from.
* You can then call object_manager_client_new_finish() to get the result of the operation.
*
* See object_manager_client_new_sync() for the synchronous, blocking version of this constructor.
*/
void
object_manager_client_new (
GDBusConnection *connection,
GDBusObjectManagerClientFlags flags,
const gchar *name,
const gchar *object_path,
GCancellable *cancellable,
GAsyncReadyCallback callback,
gpointer user_data)
{
g_async_initable_new_async (TYPE_OBJECT_MANAGER_CLIENT, G_PRIORITY_DEFAULT, cancellable, callback, user_data, "flags", flags, "name", name, "connection", connection, "object-path", object_path, "get-proxy-type-func", object_manager_client_get_proxy_type, NULL);
}
/**
* object_manager_client_new_finish:
* @res: The #GAsyncResult obtained from the #GAsyncReadyCallback passed to object_manager_client_new().
* @error: Return location for error or %NULL
*
* Finishes an operation started with object_manager_client_new().
*
* Returns: (transfer full) (type ObjectManagerClient): The constructed object manager client or %NULL if @error is set.
*/
GDBusObjectManager *
object_manager_client_new_finish (
GAsyncResult *res,
GError **error)
{
GObject *ret;
GObject *source_object;
source_object = g_async_result_get_source_object (res);
ret = g_async_initable_new_finish (G_ASYNC_INITABLE (source_object), res, error);
g_object_unref (source_object);
if (ret != NULL)
return G_DBUS_OBJECT_MANAGER (ret);
else
return NULL;
}
/**
* object_manager_client_new_sync:
* @connection: A #GDBusConnection.
* @flags: Flags from the #GDBusObjectManagerClientFlags enumeration.
* @name: (allow-none): A bus name (well-known or unique) or %NULL if @connection is not a message bus connection.
* @object_path: An object path.
* @cancellable: (allow-none): A #GCancellable or %NULL.
* @error: Return location for error or %NULL
*
* Synchronously creates #GDBusObjectManagerClient using object_manager_client_get_proxy_type() as the #GDBusProxyTypeFunc. See g_dbus_object_manager_client_new_sync() for more details.
*
* The calling thread is blocked until a reply is received.
*
* See object_manager_client_new() for the asynchronous version of this constructor.
*
* Returns: (transfer full) (type ObjectManagerClient): The constructed object manager client or %NULL if @error is set.
*/
GDBusObjectManager *
object_manager_client_new_sync (
GDBusConnection *connection,
GDBusObjectManagerClientFlags flags,
const gchar *name,
const gchar *object_path,
GCancellable *cancellable,
GError **error)
{
GInitable *ret;
ret = g_initable_new (TYPE_OBJECT_MANAGER_CLIENT, cancellable, error, "flags", flags, "name", name, "connection", connection, "object-path", object_path, "get-proxy-type-func", object_manager_client_get_proxy_type, NULL);
if (ret != NULL)
return G_DBUS_OBJECT_MANAGER (ret);
else
return NULL;
}
/**
* object_manager_client_new_for_bus:
* @bus_type: A #GBusType.
* @flags: Flags from the #GDBusObjectManagerClientFlags enumeration.
* @name: A bus name (well-known or unique).
* @object_path: An object path.
* @cancellable: (allow-none): A #GCancellable or %NULL.
* @callback: A #GAsyncReadyCallback to call when the request is satisfied.
* @user_data: User data to pass to @callback.
*
* Like object_manager_client_new() but takes a #GBusType instead of a #GDBusConnection.
*
* When the operation is finished, @callback will be invoked in the <link linkend="g-main-context-push-thread-default">thread-default main loop</link> of the thread you are calling this method from.
* You can then call object_manager_client_new_for_bus_finish() to get the result of the operation.
*
* See object_manager_client_new_for_bus_sync() for the synchronous, blocking version of this constructor.
*/
void
object_manager_client_new_for_bus (
GBusType bus_type,
GDBusObjectManagerClientFlags flags,
const gchar *name,
const gchar *object_path,
GCancellable *cancellable,
GAsyncReadyCallback callback,
gpointer user_data)
{
g_async_initable_new_async (TYPE_OBJECT_MANAGER_CLIENT, G_PRIORITY_DEFAULT, cancellable, callback, user_data, "flags", flags, "name", name, "bus-type", bus_type, "object-path", object_path, "get-proxy-type-func", object_manager_client_get_proxy_type, NULL);
}
/**
* object_manager_client_new_for_bus_finish:
* @res: The #GAsyncResult obtained from the #GAsyncReadyCallback passed to object_manager_client_new_for_bus().
* @error: Return location for error or %NULL
*
* Finishes an operation started with object_manager_client_new_for_bus().
*
* Returns: (transfer full) (type ObjectManagerClient): The constructed object manager client or %NULL if @error is set.
*/
GDBusObjectManager *
object_manager_client_new_for_bus_finish (
GAsyncResult *res,
GError **error)
{
GObject *ret;
GObject *source_object;
source_object = g_async_result_get_source_object (res);
ret = g_async_initable_new_finish (G_ASYNC_INITABLE (source_object), res, error);
g_object_unref (source_object);
if (ret != NULL)
return G_DBUS_OBJECT_MANAGER (ret);
else
return NULL;
}
/**
* object_manager_client_new_for_bus_sync:
* @bus_type: A #GBusType.
* @flags: Flags from the #GDBusObjectManagerClientFlags enumeration.
* @name: A bus name (well-known or unique).
* @object_path: An object path.
* @cancellable: (allow-none): A #GCancellable or %NULL.
* @error: Return location for error or %NULL
*
* Like object_manager_client_new_sync() but takes a #GBusType instead of a #GDBusConnection.
*
* The calling thread is blocked until a reply is received.
*
* See object_manager_client_new_for_bus() for the asynchronous version of this constructor.
*
* Returns: (transfer full) (type ObjectManagerClient): The constructed object manager client or %NULL if @error is set.
*/
GDBusObjectManager *
object_manager_client_new_for_bus_sync (
GBusType bus_type,
GDBusObjectManagerClientFlags flags,
const gchar *name,
const gchar *object_path,
GCancellable *cancellable,
GError **error)
{
GInitable *ret;
ret = g_initable_new (TYPE_OBJECT_MANAGER_CLIENT, cancellable, error, "flags", flags, "name", name, "bus-type", bus_type, "object-path", object_path, "get-proxy-type-func", object_manager_client_get_proxy_type, NULL);
if (ret != NULL)
return G_DBUS_OBJECT_MANAGER (ret);
else
return NULL;
}