| /* |
| * Generated by gdbus-codegen 2.40.2. DO NOT EDIT. |
| * |
| * The license of this code is the same as for the source it was derived from. |
| */ |
| |
| #ifdef HAVE_CONFIG_H |
| # include "config.h" |
| #endif |
| |
| #include "interfaces/sensor.h" |
| |
| #include <string.h> |
| #ifdef G_OS_UNIX |
| # include <gio/gunixfdlist.h> |
| #endif |
| |
| typedef struct |
| { |
| GDBusArgInfo parent_struct; |
| gboolean use_gvariant; |
| } _ExtendedGDBusArgInfo; |
| |
| typedef struct |
| { |
| GDBusMethodInfo parent_struct; |
| const gchar *signal_name; |
| gboolean pass_fdlist; |
| } _ExtendedGDBusMethodInfo; |
| |
| typedef struct |
| { |
| GDBusSignalInfo parent_struct; |
| const gchar *signal_name; |
| } _ExtendedGDBusSignalInfo; |
| |
| typedef struct |
| { |
| GDBusPropertyInfo parent_struct; |
| const gchar *hyphen_name; |
| gboolean use_gvariant; |
| } _ExtendedGDBusPropertyInfo; |
| |
| typedef struct |
| { |
| GDBusInterfaceInfo parent_struct; |
| const gchar *hyphen_name; |
| } _ExtendedGDBusInterfaceInfo; |
| |
| typedef struct |
| { |
| const _ExtendedGDBusPropertyInfo *info; |
| guint prop_id; |
| GValue orig_value; /* the value before the change */ |
| } ChangedProperty; |
| |
| static void |
| _changed_property_free (ChangedProperty *data) |
| { |
| g_value_unset (&data->orig_value); |
| g_free (data); |
| } |
| |
| static gboolean |
| _g_strv_equal0 (gchar **a, gchar **b) |
| { |
| gboolean ret = FALSE; |
| guint n; |
| if (a == NULL && b == NULL) |
| { |
| ret = TRUE; |
| goto out; |
| } |
| if (a == NULL || b == NULL) |
| goto out; |
| if (g_strv_length (a) != g_strv_length (b)) |
| goto out; |
| for (n = 0; a[n] != NULL; n++) |
| if (g_strcmp0 (a[n], b[n]) != 0) |
| goto out; |
| ret = TRUE; |
| out: |
| return ret; |
| } |
| |
| static gboolean |
| _g_variant_equal0 (GVariant *a, GVariant *b) |
| { |
| gboolean ret = FALSE; |
| if (a == NULL && b == NULL) |
| { |
| ret = TRUE; |
| goto out; |
| } |
| if (a == NULL || b == NULL) |
| goto out; |
| ret = g_variant_equal (a, b); |
| out: |
| return ret; |
| } |
| |
| G_GNUC_UNUSED static gboolean |
| _g_value_equal (const GValue *a, const GValue *b) |
| { |
| gboolean ret = FALSE; |
| g_assert (G_VALUE_TYPE (a) == G_VALUE_TYPE (b)); |
| switch (G_VALUE_TYPE (a)) |
| { |
| case G_TYPE_BOOLEAN: |
| ret = (g_value_get_boolean (a) == g_value_get_boolean (b)); |
| break; |
| case G_TYPE_UCHAR: |
| ret = (g_value_get_uchar (a) == g_value_get_uchar (b)); |
| break; |
| case G_TYPE_INT: |
| ret = (g_value_get_int (a) == g_value_get_int (b)); |
| break; |
| case G_TYPE_UINT: |
| ret = (g_value_get_uint (a) == g_value_get_uint (b)); |
| break; |
| case G_TYPE_INT64: |
| ret = (g_value_get_int64 (a) == g_value_get_int64 (b)); |
| break; |
| case G_TYPE_UINT64: |
| ret = (g_value_get_uint64 (a) == g_value_get_uint64 (b)); |
| break; |
| case G_TYPE_DOUBLE: |
| { |
| /* Avoid -Wfloat-equal warnings by doing a direct bit compare */ |
| gdouble da = g_value_get_double (a); |
| gdouble db = g_value_get_double (b); |
| ret = memcmp (&da, &db, sizeof (gdouble)) == 0; |
| } |
| break; |
| case G_TYPE_STRING: |
| ret = (g_strcmp0 (g_value_get_string (a), g_value_get_string (b)) == 0); |
| break; |
| case G_TYPE_VARIANT: |
| ret = _g_variant_equal0 (g_value_get_variant (a), g_value_get_variant (b)); |
| break; |
| default: |
| if (G_VALUE_TYPE (a) == G_TYPE_STRV) |
| ret = _g_strv_equal0 (g_value_get_boxed (a), g_value_get_boxed (b)); |
| else |
| g_critical ("_g_value_equal() does not handle type %s", g_type_name (G_VALUE_TYPE (a))); |
| break; |
| } |
| return ret; |
| } |
| |
| /* ------------------------------------------------------------------------ |
| * Code for interface org.openbmc.SensorValue |
| * ------------------------------------------------------------------------ |
| */ |
| |
| /** |
| * SECTION:SensorValue |
| * @title: SensorValue |
| * @short_description: Generated C code for the org.openbmc.SensorValue D-Bus interface |
| * |
| * This section contains code for working with the <link linkend="gdbus-interface-org-openbmc-SensorValue.top_of_page">org.openbmc.SensorValue</link> D-Bus interface in C. |
| */ |
| |
| /* ---- Introspection data for org.openbmc.SensorValue ---- */ |
| |
| static const _ExtendedGDBusMethodInfo _sensor_value_method_info_init = |
| { |
| { |
| -1, |
| (gchar *) "init", |
| NULL, |
| NULL, |
| NULL |
| }, |
| "handle-init", |
| FALSE |
| }; |
| |
| static const _ExtendedGDBusArgInfo _sensor_value_method_info_get_value_OUT_ARG_value = |
| { |
| { |
| -1, |
| (gchar *) "value", |
| (gchar *) "v", |
| NULL |
| }, |
| FALSE |
| }; |
| |
| static const _ExtendedGDBusArgInfo * const _sensor_value_method_info_get_value_OUT_ARG_pointers[] = |
| { |
| &_sensor_value_method_info_get_value_OUT_ARG_value, |
| NULL |
| }; |
| |
| static const _ExtendedGDBusMethodInfo _sensor_value_method_info_get_value = |
| { |
| { |
| -1, |
| (gchar *) "getValue", |
| NULL, |
| (GDBusArgInfo **) &_sensor_value_method_info_get_value_OUT_ARG_pointers, |
| NULL |
| }, |
| "handle-get-value", |
| FALSE |
| }; |
| |
| static const _ExtendedGDBusArgInfo _sensor_value_method_info_set_value_IN_ARG_value = |
| { |
| { |
| -1, |
| (gchar *) "value", |
| (gchar *) "v", |
| NULL |
| }, |
| FALSE |
| }; |
| |
| static const _ExtendedGDBusArgInfo * const _sensor_value_method_info_set_value_IN_ARG_pointers[] = |
| { |
| &_sensor_value_method_info_set_value_IN_ARG_value, |
| NULL |
| }; |
| |
| static const _ExtendedGDBusMethodInfo _sensor_value_method_info_set_value = |
| { |
| { |
| -1, |
| (gchar *) "setValue", |
| (GDBusArgInfo **) &_sensor_value_method_info_set_value_IN_ARG_pointers, |
| NULL, |
| NULL |
| }, |
| "handle-set-value", |
| FALSE |
| }; |
| |
| static const _ExtendedGDBusMethodInfo * const _sensor_value_method_info_pointers[] = |
| { |
| &_sensor_value_method_info_init, |
| &_sensor_value_method_info_get_value, |
| &_sensor_value_method_info_set_value, |
| NULL |
| }; |
| |
| static const _ExtendedGDBusArgInfo _sensor_value_signal_info_changed_ARG_value = |
| { |
| { |
| -1, |
| (gchar *) "value", |
| (gchar *) "v", |
| NULL |
| }, |
| FALSE |
| }; |
| |
| static const _ExtendedGDBusArgInfo _sensor_value_signal_info_changed_ARG_units = |
| { |
| { |
| -1, |
| (gchar *) "units", |
| (gchar *) "s", |
| NULL |
| }, |
| FALSE |
| }; |
| |
| static const _ExtendedGDBusArgInfo * const _sensor_value_signal_info_changed_ARG_pointers[] = |
| { |
| &_sensor_value_signal_info_changed_ARG_value, |
| &_sensor_value_signal_info_changed_ARG_units, |
| NULL |
| }; |
| |
| static const _ExtendedGDBusSignalInfo _sensor_value_signal_info_changed = |
| { |
| { |
| -1, |
| (gchar *) "Changed", |
| (GDBusArgInfo **) &_sensor_value_signal_info_changed_ARG_pointers, |
| NULL |
| }, |
| "changed" |
| }; |
| |
| static const _ExtendedGDBusArgInfo _sensor_value_signal_info_heartbeat_ARG_bus_name = |
| { |
| { |
| -1, |
| (gchar *) "bus_name", |
| (gchar *) "s", |
| NULL |
| }, |
| FALSE |
| }; |
| |
| static const _ExtendedGDBusArgInfo * const _sensor_value_signal_info_heartbeat_ARG_pointers[] = |
| { |
| &_sensor_value_signal_info_heartbeat_ARG_bus_name, |
| NULL |
| }; |
| |
| static const _ExtendedGDBusSignalInfo _sensor_value_signal_info_heartbeat = |
| { |
| { |
| -1, |
| (gchar *) "Heartbeat", |
| (GDBusArgInfo **) &_sensor_value_signal_info_heartbeat_ARG_pointers, |
| NULL |
| }, |
| "heartbeat" |
| }; |
| |
| static const _ExtendedGDBusSignalInfo * const _sensor_value_signal_info_pointers[] = |
| { |
| &_sensor_value_signal_info_changed, |
| &_sensor_value_signal_info_heartbeat, |
| NULL |
| }; |
| |
| static const _ExtendedGDBusPropertyInfo _sensor_value_property_info_value = |
| { |
| { |
| -1, |
| (gchar *) "value", |
| (gchar *) "v", |
| G_DBUS_PROPERTY_INFO_FLAGS_READABLE | G_DBUS_PROPERTY_INFO_FLAGS_WRITABLE, |
| NULL |
| }, |
| "value", |
| FALSE |
| }; |
| |
| static const _ExtendedGDBusPropertyInfo _sensor_value_property_info_units = |
| { |
| { |
| -1, |
| (gchar *) "units", |
| (gchar *) "s", |
| G_DBUS_PROPERTY_INFO_FLAGS_READABLE, |
| NULL |
| }, |
| "units", |
| FALSE |
| }; |
| |
| static const _ExtendedGDBusPropertyInfo _sensor_value_property_info_poll_interval = |
| { |
| { |
| -1, |
| (gchar *) "poll_interval", |
| (gchar *) "i", |
| G_DBUS_PROPERTY_INFO_FLAGS_READABLE, |
| NULL |
| }, |
| "poll-interval", |
| FALSE |
| }; |
| |
| static const _ExtendedGDBusPropertyInfo _sensor_value_property_info_heatbeat = |
| { |
| { |
| -1, |
| (gchar *) "heatbeat", |
| (gchar *) "i", |
| G_DBUS_PROPERTY_INFO_FLAGS_READABLE, |
| NULL |
| }, |
| "heatbeat", |
| FALSE |
| }; |
| |
| static const _ExtendedGDBusPropertyInfo * const _sensor_value_property_info_pointers[] = |
| { |
| &_sensor_value_property_info_value, |
| &_sensor_value_property_info_units, |
| &_sensor_value_property_info_poll_interval, |
| &_sensor_value_property_info_heatbeat, |
| NULL |
| }; |
| |
| static const _ExtendedGDBusInterfaceInfo _sensor_value_interface_info = |
| { |
| { |
| -1, |
| (gchar *) "org.openbmc.SensorValue", |
| (GDBusMethodInfo **) &_sensor_value_method_info_pointers, |
| (GDBusSignalInfo **) &_sensor_value_signal_info_pointers, |
| (GDBusPropertyInfo **) &_sensor_value_property_info_pointers, |
| NULL |
| }, |
| "sensor-value", |
| }; |
| |
| |
| /** |
| * sensor_value_interface_info: |
| * |
| * Gets a machine-readable description of the <link linkend="gdbus-interface-org-openbmc-SensorValue.top_of_page">org.openbmc.SensorValue</link> D-Bus interface. |
| * |
| * Returns: (transfer none): A #GDBusInterfaceInfo. Do not free. |
| */ |
| GDBusInterfaceInfo * |
| sensor_value_interface_info (void) |
| { |
| return (GDBusInterfaceInfo *) &_sensor_value_interface_info.parent_struct; |
| } |
| |
| /** |
| * sensor_value_override_properties: |
| * @klass: The class structure for a #GObject<!-- -->-derived class. |
| * @property_id_begin: The property id to assign to the first overridden property. |
| * |
| * Overrides all #GObject properties in the #SensorValue interface for a concrete class. |
| * The properties are overridden in the order they are defined. |
| * |
| * Returns: The last property id. |
| */ |
| guint |
| sensor_value_override_properties (GObjectClass *klass, guint property_id_begin) |
| { |
| g_object_class_override_property (klass, property_id_begin++, "value"); |
| g_object_class_override_property (klass, property_id_begin++, "units"); |
| g_object_class_override_property (klass, property_id_begin++, "poll-interval"); |
| g_object_class_override_property (klass, property_id_begin++, "heatbeat"); |
| return property_id_begin - 1; |
| } |
| |
| |
| |
| /** |
| * SensorValue: |
| * |
| * Abstract interface type for the D-Bus interface <link linkend="gdbus-interface-org-openbmc-SensorValue.top_of_page">org.openbmc.SensorValue</link>. |
| */ |
| |
| /** |
| * SensorValueIface: |
| * @parent_iface: The parent interface. |
| * @handle_get_value: Handler for the #SensorValue::handle-get-value signal. |
| * @handle_init: Handler for the #SensorValue::handle-init signal. |
| * @handle_set_value: Handler for the #SensorValue::handle-set-value signal. |
| * @get_heatbeat: Getter for the #SensorValue:heatbeat property. |
| * @get_poll_interval: Getter for the #SensorValue:poll-interval property. |
| * @get_units: Getter for the #SensorValue:units property. |
| * @get_value: Getter for the #SensorValue:value property. |
| * @changed: Handler for the #SensorValue::changed signal. |
| * @heartbeat: Handler for the #SensorValue::heartbeat signal. |
| * |
| * Virtual table for the D-Bus interface <link linkend="gdbus-interface-org-openbmc-SensorValue.top_of_page">org.openbmc.SensorValue</link>. |
| */ |
| |
| typedef SensorValueIface SensorValueInterface; |
| G_DEFINE_INTERFACE (SensorValue, sensor_value, G_TYPE_OBJECT); |
| |
| static void |
| sensor_value_default_init (SensorValueIface *iface) |
| { |
| /* GObject signals for incoming D-Bus method calls: */ |
| /** |
| * SensorValue::handle-init: |
| * @object: A #SensorValue. |
| * @invocation: A #GDBusMethodInvocation. |
| * |
| * Signal emitted when a remote caller is invoking the <link linkend="gdbus-method-org-openbmc-SensorValue.init">init()</link> D-Bus method. |
| * |
| * If a signal handler returns %TRUE, it means the signal handler will handle the invocation (e.g. take a reference to @invocation and eventually call sensor_value_complete_init() or e.g. g_dbus_method_invocation_return_error() on it) and no order signal handlers will run. If no signal handler handles the invocation, the %G_DBUS_ERROR_UNKNOWN_METHOD error is returned. |
| * |
| * Returns: %TRUE if the invocation was handled, %FALSE to let other signal handlers run. |
| */ |
| g_signal_new ("handle-init", |
| G_TYPE_FROM_INTERFACE (iface), |
| G_SIGNAL_RUN_LAST, |
| G_STRUCT_OFFSET (SensorValueIface, handle_init), |
| g_signal_accumulator_true_handled, |
| NULL, |
| g_cclosure_marshal_generic, |
| G_TYPE_BOOLEAN, |
| 1, |
| G_TYPE_DBUS_METHOD_INVOCATION); |
| |
| /** |
| * SensorValue::handle-get-value: |
| * @object: A #SensorValue. |
| * @invocation: A #GDBusMethodInvocation. |
| * |
| * Signal emitted when a remote caller is invoking the <link linkend="gdbus-method-org-openbmc-SensorValue.getValue">getValue()</link> D-Bus method. |
| * |
| * If a signal handler returns %TRUE, it means the signal handler will handle the invocation (e.g. take a reference to @invocation and eventually call sensor_value_complete_get_value() or e.g. g_dbus_method_invocation_return_error() on it) and no order signal handlers will run. If no signal handler handles the invocation, the %G_DBUS_ERROR_UNKNOWN_METHOD error is returned. |
| * |
| * Returns: %TRUE if the invocation was handled, %FALSE to let other signal handlers run. |
| */ |
| g_signal_new ("handle-get-value", |
| G_TYPE_FROM_INTERFACE (iface), |
| G_SIGNAL_RUN_LAST, |
| G_STRUCT_OFFSET (SensorValueIface, handle_get_value), |
| g_signal_accumulator_true_handled, |
| NULL, |
| g_cclosure_marshal_generic, |
| G_TYPE_BOOLEAN, |
| 1, |
| G_TYPE_DBUS_METHOD_INVOCATION); |
| |
| /** |
| * SensorValue::handle-set-value: |
| * @object: A #SensorValue. |
| * @invocation: A #GDBusMethodInvocation. |
| * @arg_value: Argument passed by remote caller. |
| * |
| * Signal emitted when a remote caller is invoking the <link linkend="gdbus-method-org-openbmc-SensorValue.setValue">setValue()</link> D-Bus method. |
| * |
| * If a signal handler returns %TRUE, it means the signal handler will handle the invocation (e.g. take a reference to @invocation and eventually call sensor_value_complete_set_value() or e.g. g_dbus_method_invocation_return_error() on it) and no order signal handlers will run. If no signal handler handles the invocation, the %G_DBUS_ERROR_UNKNOWN_METHOD error is returned. |
| * |
| * Returns: %TRUE if the invocation was handled, %FALSE to let other signal handlers run. |
| */ |
| g_signal_new ("handle-set-value", |
| G_TYPE_FROM_INTERFACE (iface), |
| G_SIGNAL_RUN_LAST, |
| G_STRUCT_OFFSET (SensorValueIface, handle_set_value), |
| g_signal_accumulator_true_handled, |
| NULL, |
| g_cclosure_marshal_generic, |
| G_TYPE_BOOLEAN, |
| 2, |
| G_TYPE_DBUS_METHOD_INVOCATION, G_TYPE_VARIANT); |
| |
| /* GObject signals for received D-Bus signals: */ |
| /** |
| * SensorValue::changed: |
| * @object: A #SensorValue. |
| * @arg_value: Argument. |
| * @arg_units: Argument. |
| * |
| * On the client-side, this signal is emitted whenever the D-Bus signal <link linkend="gdbus-signal-org-openbmc-SensorValue.Changed">"Changed"</link> is received. |
| * |
| * On the service-side, this signal can be used with e.g. g_signal_emit_by_name() to make the object emit the D-Bus signal. |
| */ |
| g_signal_new ("changed", |
| G_TYPE_FROM_INTERFACE (iface), |
| G_SIGNAL_RUN_LAST, |
| G_STRUCT_OFFSET (SensorValueIface, changed), |
| NULL, |
| NULL, |
| g_cclosure_marshal_generic, |
| G_TYPE_NONE, |
| 2, G_TYPE_VARIANT, G_TYPE_STRING); |
| |
| /** |
| * SensorValue::heartbeat: |
| * @object: A #SensorValue. |
| * @arg_bus_name: Argument. |
| * |
| * On the client-side, this signal is emitted whenever the D-Bus signal <link linkend="gdbus-signal-org-openbmc-SensorValue.Heartbeat">"Heartbeat"</link> is received. |
| * |
| * On the service-side, this signal can be used with e.g. g_signal_emit_by_name() to make the object emit the D-Bus signal. |
| */ |
| g_signal_new ("heartbeat", |
| G_TYPE_FROM_INTERFACE (iface), |
| G_SIGNAL_RUN_LAST, |
| G_STRUCT_OFFSET (SensorValueIface, heartbeat), |
| NULL, |
| NULL, |
| g_cclosure_marshal_generic, |
| G_TYPE_NONE, |
| 1, G_TYPE_STRING); |
| |
| /* GObject properties for D-Bus properties: */ |
| /** |
| * SensorValue:value: |
| * |
| * Represents the D-Bus property <link linkend="gdbus-property-org-openbmc-SensorValue.value">"value"</link>. |
| * |
| * Since the D-Bus property for this #GObject property is both readable and writable, it is meaningful to both read from it and write to it on both the service- and client-side. |
| */ |
| g_object_interface_install_property (iface, |
| g_param_spec_variant ("value", "value", "value", G_VARIANT_TYPE ("v"), NULL, G_PARAM_READWRITE | G_PARAM_STATIC_STRINGS)); |
| /** |
| * SensorValue:units: |
| * |
| * Represents the D-Bus property <link linkend="gdbus-property-org-openbmc-SensorValue.units">"units"</link>. |
| * |
| * Since the D-Bus property for this #GObject property is readable but not writable, it is meaningful to read from it on both the client- and service-side. It is only meaningful, however, to write to it on the service-side. |
| */ |
| g_object_interface_install_property (iface, |
| g_param_spec_string ("units", "units", "units", NULL, G_PARAM_READWRITE | G_PARAM_STATIC_STRINGS)); |
| /** |
| * SensorValue:poll-interval: |
| * |
| * Represents the D-Bus property <link linkend="gdbus-property-org-openbmc-SensorValue.poll_interval">"poll_interval"</link>. |
| * |
| * Since the D-Bus property for this #GObject property is readable but not writable, it is meaningful to read from it on both the client- and service-side. It is only meaningful, however, to write to it on the service-side. |
| */ |
| g_object_interface_install_property (iface, |
| g_param_spec_int ("poll-interval", "poll_interval", "poll_interval", G_MININT32, G_MAXINT32, 0, G_PARAM_READWRITE | G_PARAM_STATIC_STRINGS)); |
| /** |
| * SensorValue:heatbeat: |
| * |
| * Represents the D-Bus property <link linkend="gdbus-property-org-openbmc-SensorValue.heatbeat">"heatbeat"</link>. |
| * |
| * Since the D-Bus property for this #GObject property is readable but not writable, it is meaningful to read from it on both the client- and service-side. It is only meaningful, however, to write to it on the service-side. |
| */ |
| g_object_interface_install_property (iface, |
| g_param_spec_int ("heatbeat", "heatbeat", "heatbeat", G_MININT32, G_MAXINT32, 0, G_PARAM_READWRITE | G_PARAM_STATIC_STRINGS)); |
| } |
| |
| /** |
| * sensor_value_get_value: (skip) |
| * @object: A #SensorValue. |
| * |
| * Gets the value of the <link linkend="gdbus-property-org-openbmc-SensorValue.value">"value"</link> D-Bus property. |
| * |
| * Since this D-Bus property is both readable and writable, it is meaningful to use this function on both the client- and service-side. |
| * |
| * <warning>The returned value is only valid until the property changes so on the client-side it is only safe to use this function on the thread where @object was constructed. Use sensor_value_dup_value() if on another thread.</warning> |
| * |
| * Returns: (transfer none): The property value or %NULL if the property is not set. Do not free the returned value, it belongs to @object. |
| */ |
| GVariant * |
| sensor_value_get_value (SensorValue *object) |
| { |
| return SENSOR_VALUE_GET_IFACE (object)->get_value (object); |
| } |
| |
| /** |
| * sensor_value_dup_value: (skip) |
| * @object: A #SensorValue. |
| * |
| * Gets a copy of the <link linkend="gdbus-property-org-openbmc-SensorValue.value">"value"</link> D-Bus property. |
| * |
| * Since this D-Bus property is both readable and writable, it is meaningful to use this function on both the client- and service-side. |
| * |
| * Returns: (transfer full): The property value or %NULL if the property is not set. The returned value should be freed with g_variant_unref(). |
| */ |
| GVariant * |
| sensor_value_dup_value (SensorValue *object) |
| { |
| GVariant *value; |
| g_object_get (G_OBJECT (object), "value", &value, NULL); |
| return value; |
| } |
| |
| /** |
| * sensor_value_set_value: (skip) |
| * @object: A #SensorValue. |
| * @value: The value to set. |
| * |
| * Sets the <link linkend="gdbus-property-org-openbmc-SensorValue.value">"value"</link> D-Bus property to @value. |
| * |
| * Since this D-Bus property is both readable and writable, it is meaningful to use this function on both the client- and service-side. |
| */ |
| void |
| sensor_value_set_value (SensorValue *object, GVariant *value) |
| { |
| g_object_set (G_OBJECT (object), "value", value, NULL); |
| } |
| |
| /** |
| * sensor_value_get_units: (skip) |
| * @object: A #SensorValue. |
| * |
| * Gets the value of the <link linkend="gdbus-property-org-openbmc-SensorValue.units">"units"</link> D-Bus property. |
| * |
| * Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side. |
| * |
| * <warning>The returned value is only valid until the property changes so on the client-side it is only safe to use this function on the thread where @object was constructed. Use sensor_value_dup_units() if on another thread.</warning> |
| * |
| * Returns: (transfer none): The property value or %NULL if the property is not set. Do not free the returned value, it belongs to @object. |
| */ |
| const gchar * |
| sensor_value_get_units (SensorValue *object) |
| { |
| return SENSOR_VALUE_GET_IFACE (object)->get_units (object); |
| } |
| |
| /** |
| * sensor_value_dup_units: (skip) |
| * @object: A #SensorValue. |
| * |
| * Gets a copy of the <link linkend="gdbus-property-org-openbmc-SensorValue.units">"units"</link> D-Bus property. |
| * |
| * Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side. |
| * |
| * Returns: (transfer full): The property value or %NULL if the property is not set. The returned value should be freed with g_free(). |
| */ |
| gchar * |
| sensor_value_dup_units (SensorValue *object) |
| { |
| gchar *value; |
| g_object_get (G_OBJECT (object), "units", &value, NULL); |
| return value; |
| } |
| |
| /** |
| * sensor_value_set_units: (skip) |
| * @object: A #SensorValue. |
| * @value: The value to set. |
| * |
| * Sets the <link linkend="gdbus-property-org-openbmc-SensorValue.units">"units"</link> D-Bus property to @value. |
| * |
| * Since this D-Bus property is not writable, it is only meaningful to use this function on the service-side. |
| */ |
| void |
| sensor_value_set_units (SensorValue *object, const gchar *value) |
| { |
| g_object_set (G_OBJECT (object), "units", value, NULL); |
| } |
| |
| /** |
| * sensor_value_get_poll_interval: (skip) |
| * @object: A #SensorValue. |
| * |
| * Gets the value of the <link linkend="gdbus-property-org-openbmc-SensorValue.poll_interval">"poll_interval"</link> D-Bus property. |
| * |
| * Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side. |
| * |
| * Returns: The property value. |
| */ |
| gint |
| sensor_value_get_poll_interval (SensorValue *object) |
| { |
| return SENSOR_VALUE_GET_IFACE (object)->get_poll_interval (object); |
| } |
| |
| /** |
| * sensor_value_set_poll_interval: (skip) |
| * @object: A #SensorValue. |
| * @value: The value to set. |
| * |
| * Sets the <link linkend="gdbus-property-org-openbmc-SensorValue.poll_interval">"poll_interval"</link> D-Bus property to @value. |
| * |
| * Since this D-Bus property is not writable, it is only meaningful to use this function on the service-side. |
| */ |
| void |
| sensor_value_set_poll_interval (SensorValue *object, gint value) |
| { |
| g_object_set (G_OBJECT (object), "poll-interval", value, NULL); |
| } |
| |
| /** |
| * sensor_value_get_heatbeat: (skip) |
| * @object: A #SensorValue. |
| * |
| * Gets the value of the <link linkend="gdbus-property-org-openbmc-SensorValue.heatbeat">"heatbeat"</link> D-Bus property. |
| * |
| * Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side. |
| * |
| * Returns: The property value. |
| */ |
| gint |
| sensor_value_get_heatbeat (SensorValue *object) |
| { |
| return SENSOR_VALUE_GET_IFACE (object)->get_heatbeat (object); |
| } |
| |
| /** |
| * sensor_value_set_heatbeat: (skip) |
| * @object: A #SensorValue. |
| * @value: The value to set. |
| * |
| * Sets the <link linkend="gdbus-property-org-openbmc-SensorValue.heatbeat">"heatbeat"</link> D-Bus property to @value. |
| * |
| * Since this D-Bus property is not writable, it is only meaningful to use this function on the service-side. |
| */ |
| void |
| sensor_value_set_heatbeat (SensorValue *object, gint value) |
| { |
| g_object_set (G_OBJECT (object), "heatbeat", value, NULL); |
| } |
| |
| /** |
| * sensor_value_emit_changed: |
| * @object: A #SensorValue. |
| * @arg_value: Argument to pass with the signal. |
| * @arg_units: Argument to pass with the signal. |
| * |
| * Emits the <link linkend="gdbus-signal-org-openbmc-SensorValue.Changed">"Changed"</link> D-Bus signal. |
| */ |
| void |
| sensor_value_emit_changed ( |
| SensorValue *object, |
| GVariant *arg_value, |
| const gchar *arg_units) |
| { |
| g_signal_emit_by_name (object, "changed", arg_value, arg_units); |
| } |
| |
| /** |
| * sensor_value_emit_heartbeat: |
| * @object: A #SensorValue. |
| * @arg_bus_name: Argument to pass with the signal. |
| * |
| * Emits the <link linkend="gdbus-signal-org-openbmc-SensorValue.Heartbeat">"Heartbeat"</link> D-Bus signal. |
| */ |
| void |
| sensor_value_emit_heartbeat ( |
| SensorValue *object, |
| const gchar *arg_bus_name) |
| { |
| g_signal_emit_by_name (object, "heartbeat", arg_bus_name); |
| } |
| |
| /** |
| * sensor_value_call_init: |
| * @proxy: A #SensorValueProxy. |
| * @cancellable: (allow-none): A #GCancellable or %NULL. |
| * @callback: A #GAsyncReadyCallback to call when the request is satisfied or %NULL. |
| * @user_data: User data to pass to @callback. |
| * |
| * Asynchronously invokes the <link linkend="gdbus-method-org-openbmc-SensorValue.init">init()</link> D-Bus method on @proxy. |
| * When the operation is finished, @callback will be invoked in the <link linkend="g-main-context-push-thread-default">thread-default main loop</link> of the thread you are calling this method from. |
| * You can then call sensor_value_call_init_finish() to get the result of the operation. |
| * |
| * See sensor_value_call_init_sync() for the synchronous, blocking version of this method. |
| */ |
| void |
| sensor_value_call_init ( |
| SensorValue *proxy, |
| GCancellable *cancellable, |
| GAsyncReadyCallback callback, |
| gpointer user_data) |
| { |
| g_dbus_proxy_call (G_DBUS_PROXY (proxy), |
| "init", |
| g_variant_new ("()"), |
| G_DBUS_CALL_FLAGS_NONE, |
| -1, |
| cancellable, |
| callback, |
| user_data); |
| } |
| |
| /** |
| * sensor_value_call_init_finish: |
| * @proxy: A #SensorValueProxy. |
| * @res: The #GAsyncResult obtained from the #GAsyncReadyCallback passed to sensor_value_call_init(). |
| * @error: Return location for error or %NULL. |
| * |
| * Finishes an operation started with sensor_value_call_init(). |
| * |
| * Returns: (skip): %TRUE if the call succeded, %FALSE if @error is set. |
| */ |
| gboolean |
| sensor_value_call_init_finish ( |
| SensorValue *proxy, |
| GAsyncResult *res, |
| GError **error) |
| { |
| GVariant *_ret; |
| _ret = g_dbus_proxy_call_finish (G_DBUS_PROXY (proxy), res, error); |
| if (_ret == NULL) |
| goto _out; |
| g_variant_get (_ret, |
| "()"); |
| g_variant_unref (_ret); |
| _out: |
| return _ret != NULL; |
| } |
| |
| /** |
| * sensor_value_call_init_sync: |
| * @proxy: A #SensorValueProxy. |
| * @cancellable: (allow-none): A #GCancellable or %NULL. |
| * @error: Return location for error or %NULL. |
| * |
| * Synchronously invokes the <link linkend="gdbus-method-org-openbmc-SensorValue.init">init()</link> D-Bus method on @proxy. The calling thread is blocked until a reply is received. |
| * |
| * See sensor_value_call_init() for the asynchronous version of this method. |
| * |
| * Returns: (skip): %TRUE if the call succeded, %FALSE if @error is set. |
| */ |
| gboolean |
| sensor_value_call_init_sync ( |
| SensorValue *proxy, |
| GCancellable *cancellable, |
| GError **error) |
| { |
| GVariant *_ret; |
| _ret = g_dbus_proxy_call_sync (G_DBUS_PROXY (proxy), |
| "init", |
| g_variant_new ("()"), |
| G_DBUS_CALL_FLAGS_NONE, |
| -1, |
| cancellable, |
| error); |
| if (_ret == NULL) |
| goto _out; |
| g_variant_get (_ret, |
| "()"); |
| g_variant_unref (_ret); |
| _out: |
| return _ret != NULL; |
| } |
| |
| /** |
| * sensor_value_call_get_value: |
| * @proxy: A #SensorValueProxy. |
| * @cancellable: (allow-none): A #GCancellable or %NULL. |
| * @callback: A #GAsyncReadyCallback to call when the request is satisfied or %NULL. |
| * @user_data: User data to pass to @callback. |
| * |
| * Asynchronously invokes the <link linkend="gdbus-method-org-openbmc-SensorValue.getValue">getValue()</link> D-Bus method on @proxy. |
| * When the operation is finished, @callback will be invoked in the <link linkend="g-main-context-push-thread-default">thread-default main loop</link> of the thread you are calling this method from. |
| * You can then call sensor_value_call_get_value_finish() to get the result of the operation. |
| * |
| * See sensor_value_call_get_value_sync() for the synchronous, blocking version of this method. |
| */ |
| void |
| sensor_value_call_get_value ( |
| SensorValue *proxy, |
| GCancellable *cancellable, |
| GAsyncReadyCallback callback, |
| gpointer user_data) |
| { |
| g_dbus_proxy_call (G_DBUS_PROXY (proxy), |
| "getValue", |
| g_variant_new ("()"), |
| G_DBUS_CALL_FLAGS_NONE, |
| -1, |
| cancellable, |
| callback, |
| user_data); |
| } |
| |
| /** |
| * sensor_value_call_get_value_finish: |
| * @proxy: A #SensorValueProxy. |
| * @out_value: (out): Return location for return parameter or %NULL to ignore. |
| * @res: The #GAsyncResult obtained from the #GAsyncReadyCallback passed to sensor_value_call_get_value(). |
| * @error: Return location for error or %NULL. |
| * |
| * Finishes an operation started with sensor_value_call_get_value(). |
| * |
| * Returns: (skip): %TRUE if the call succeded, %FALSE if @error is set. |
| */ |
| gboolean |
| sensor_value_call_get_value_finish ( |
| SensorValue *proxy, |
| GVariant **out_value, |
| GAsyncResult *res, |
| GError **error) |
| { |
| GVariant *_ret; |
| _ret = g_dbus_proxy_call_finish (G_DBUS_PROXY (proxy), res, error); |
| if (_ret == NULL) |
| goto _out; |
| g_variant_get (_ret, |
| "(@v)", |
| out_value); |
| g_variant_unref (_ret); |
| _out: |
| return _ret != NULL; |
| } |
| |
| /** |
| * sensor_value_call_get_value_sync: |
| * @proxy: A #SensorValueProxy. |
| * @out_value: (out): Return location for return parameter or %NULL to ignore. |
| * @cancellable: (allow-none): A #GCancellable or %NULL. |
| * @error: Return location for error or %NULL. |
| * |
| * Synchronously invokes the <link linkend="gdbus-method-org-openbmc-SensorValue.getValue">getValue()</link> D-Bus method on @proxy. The calling thread is blocked until a reply is received. |
| * |
| * See sensor_value_call_get_value() for the asynchronous version of this method. |
| * |
| * Returns: (skip): %TRUE if the call succeded, %FALSE if @error is set. |
| */ |
| gboolean |
| sensor_value_call_get_value_sync ( |
| SensorValue *proxy, |
| GVariant **out_value, |
| GCancellable *cancellable, |
| GError **error) |
| { |
| GVariant *_ret; |
| _ret = g_dbus_proxy_call_sync (G_DBUS_PROXY (proxy), |
| "getValue", |
| g_variant_new ("()"), |
| G_DBUS_CALL_FLAGS_NONE, |
| -1, |
| cancellable, |
| error); |
| if (_ret == NULL) |
| goto _out; |
| g_variant_get (_ret, |
| "(@v)", |
| out_value); |
| g_variant_unref (_ret); |
| _out: |
| return _ret != NULL; |
| } |
| |
| /** |
| * sensor_value_call_set_value: |
| * @proxy: A #SensorValueProxy. |
| * @arg_value: Argument to pass with the method invocation. |
| * @cancellable: (allow-none): A #GCancellable or %NULL. |
| * @callback: A #GAsyncReadyCallback to call when the request is satisfied or %NULL. |
| * @user_data: User data to pass to @callback. |
| * |
| * Asynchronously invokes the <link linkend="gdbus-method-org-openbmc-SensorValue.setValue">setValue()</link> D-Bus method on @proxy. |
| * When the operation is finished, @callback will be invoked in the <link linkend="g-main-context-push-thread-default">thread-default main loop</link> of the thread you are calling this method from. |
| * You can then call sensor_value_call_set_value_finish() to get the result of the operation. |
| * |
| * See sensor_value_call_set_value_sync() for the synchronous, blocking version of this method. |
| */ |
| void |
| sensor_value_call_set_value ( |
| SensorValue *proxy, |
| GVariant *arg_value, |
| GCancellable *cancellable, |
| GAsyncReadyCallback callback, |
| gpointer user_data) |
| { |
| g_dbus_proxy_call (G_DBUS_PROXY (proxy), |
| "setValue", |
| g_variant_new ("(@v)", |
| arg_value), |
| G_DBUS_CALL_FLAGS_NONE, |
| -1, |
| cancellable, |
| callback, |
| user_data); |
| } |
| |
| /** |
| * sensor_value_call_set_value_finish: |
| * @proxy: A #SensorValueProxy. |
| * @res: The #GAsyncResult obtained from the #GAsyncReadyCallback passed to sensor_value_call_set_value(). |
| * @error: Return location for error or %NULL. |
| * |
| * Finishes an operation started with sensor_value_call_set_value(). |
| * |
| * Returns: (skip): %TRUE if the call succeded, %FALSE if @error is set. |
| */ |
| gboolean |
| sensor_value_call_set_value_finish ( |
| SensorValue *proxy, |
| GAsyncResult *res, |
| GError **error) |
| { |
| GVariant *_ret; |
| _ret = g_dbus_proxy_call_finish (G_DBUS_PROXY (proxy), res, error); |
| if (_ret == NULL) |
| goto _out; |
| g_variant_get (_ret, |
| "()"); |
| g_variant_unref (_ret); |
| _out: |
| return _ret != NULL; |
| } |
| |
| /** |
| * sensor_value_call_set_value_sync: |
| * @proxy: A #SensorValueProxy. |
| * @arg_value: Argument to pass with the method invocation. |
| * @cancellable: (allow-none): A #GCancellable or %NULL. |
| * @error: Return location for error or %NULL. |
| * |
| * Synchronously invokes the <link linkend="gdbus-method-org-openbmc-SensorValue.setValue">setValue()</link> D-Bus method on @proxy. The calling thread is blocked until a reply is received. |
| * |
| * See sensor_value_call_set_value() for the asynchronous version of this method. |
| * |
| * Returns: (skip): %TRUE if the call succeded, %FALSE if @error is set. |
| */ |
| gboolean |
| sensor_value_call_set_value_sync ( |
| SensorValue *proxy, |
| GVariant *arg_value, |
| GCancellable *cancellable, |
| GError **error) |
| { |
| GVariant *_ret; |
| _ret = g_dbus_proxy_call_sync (G_DBUS_PROXY (proxy), |
| "setValue", |
| g_variant_new ("(@v)", |
| arg_value), |
| G_DBUS_CALL_FLAGS_NONE, |
| -1, |
| cancellable, |
| error); |
| if (_ret == NULL) |
| goto _out; |
| g_variant_get (_ret, |
| "()"); |
| g_variant_unref (_ret); |
| _out: |
| return _ret != NULL; |
| } |
| |
| /** |
| * sensor_value_complete_init: |
| * @object: A #SensorValue. |
| * @invocation: (transfer full): A #GDBusMethodInvocation. |
| * |
| * Helper function used in service implementations to finish handling invocations of the <link linkend="gdbus-method-org-openbmc-SensorValue.init">init()</link> D-Bus method. If you instead want to finish handling an invocation by returning an error, use g_dbus_method_invocation_return_error() or similar. |
| * |
| * This method will free @invocation, you cannot use it afterwards. |
| */ |
| void |
| sensor_value_complete_init ( |
| SensorValue *object, |
| GDBusMethodInvocation *invocation) |
| { |
| g_dbus_method_invocation_return_value (invocation, |
| g_variant_new ("()")); |
| } |
| |
| /** |
| * sensor_value_complete_get_value: |
| * @object: A #SensorValue. |
| * @invocation: (transfer full): A #GDBusMethodInvocation. |
| * @value: Parameter to return. |
| * |
| * Helper function used in service implementations to finish handling invocations of the <link linkend="gdbus-method-org-openbmc-SensorValue.getValue">getValue()</link> D-Bus method. If you instead want to finish handling an invocation by returning an error, use g_dbus_method_invocation_return_error() or similar. |
| * |
| * This method will free @invocation, you cannot use it afterwards. |
| */ |
| void |
| sensor_value_complete_get_value ( |
| SensorValue *object, |
| GDBusMethodInvocation *invocation, |
| GVariant *value) |
| { |
| g_dbus_method_invocation_return_value (invocation, |
| g_variant_new ("(@v)", |
| value)); |
| } |
| |
| /** |
| * sensor_value_complete_set_value: |
| * @object: A #SensorValue. |
| * @invocation: (transfer full): A #GDBusMethodInvocation. |
| * |
| * Helper function used in service implementations to finish handling invocations of the <link linkend="gdbus-method-org-openbmc-SensorValue.setValue">setValue()</link> D-Bus method. If you instead want to finish handling an invocation by returning an error, use g_dbus_method_invocation_return_error() or similar. |
| * |
| * This method will free @invocation, you cannot use it afterwards. |
| */ |
| void |
| sensor_value_complete_set_value ( |
| SensorValue *object, |
| GDBusMethodInvocation *invocation) |
| { |
| g_dbus_method_invocation_return_value (invocation, |
| g_variant_new ("()")); |
| } |
| |
| /* ------------------------------------------------------------------------ */ |
| |
| /** |
| * SensorValueProxy: |
| * |
| * The #SensorValueProxy structure contains only private data and should only be accessed using the provided API. |
| */ |
| |
| /** |
| * SensorValueProxyClass: |
| * @parent_class: The parent class. |
| * |
| * Class structure for #SensorValueProxy. |
| */ |
| |
| struct _SensorValueProxyPrivate |
| { |
| GData *qdata; |
| }; |
| |
| static void sensor_value_proxy_iface_init (SensorValueIface *iface); |
| |
| #if GLIB_VERSION_MAX_ALLOWED >= GLIB_VERSION_2_38 |
| G_DEFINE_TYPE_WITH_CODE (SensorValueProxy, sensor_value_proxy, G_TYPE_DBUS_PROXY, |
| G_ADD_PRIVATE (SensorValueProxy) |
| G_IMPLEMENT_INTERFACE (TYPE_SENSOR_VALUE, sensor_value_proxy_iface_init)); |
| |
| #else |
| G_DEFINE_TYPE_WITH_CODE (SensorValueProxy, sensor_value_proxy, G_TYPE_DBUS_PROXY, |
| G_IMPLEMENT_INTERFACE (TYPE_SENSOR_VALUE, sensor_value_proxy_iface_init)); |
| |
| #endif |
| static void |
| sensor_value_proxy_finalize (GObject *object) |
| { |
| SensorValueProxy *proxy = SENSOR_VALUE_PROXY (object); |
| g_datalist_clear (&proxy->priv->qdata); |
| G_OBJECT_CLASS (sensor_value_proxy_parent_class)->finalize (object); |
| } |
| |
| static void |
| sensor_value_proxy_get_property (GObject *object, |
| guint prop_id, |
| GValue *value, |
| GParamSpec *pspec G_GNUC_UNUSED) |
| { |
| const _ExtendedGDBusPropertyInfo *info; |
| GVariant *variant; |
| g_assert (prop_id != 0 && prop_id - 1 < 4); |
| info = _sensor_value_property_info_pointers[prop_id - 1]; |
| variant = g_dbus_proxy_get_cached_property (G_DBUS_PROXY (object), info->parent_struct.name); |
| if (info->use_gvariant) |
| { |
| g_value_set_variant (value, variant); |
| } |
| else |
| { |
| if (variant != NULL) |
| g_dbus_gvariant_to_gvalue (variant, value); |
| } |
| if (variant != NULL) |
| g_variant_unref (variant); |
| } |
| |
| static void |
| sensor_value_proxy_set_property_cb (GDBusProxy *proxy, |
| GAsyncResult *res, |
| gpointer user_data) |
| { |
| const _ExtendedGDBusPropertyInfo *info = user_data; |
| GError *error; |
| GVariant *_ret; |
| error = NULL; |
| _ret = g_dbus_proxy_call_finish (proxy, res, &error); |
| if (!_ret) |
| { |
| g_warning ("Error setting property '%s' on interface org.openbmc.SensorValue: %s (%s, %d)", |
| info->parent_struct.name, |
| error->message, g_quark_to_string (error->domain), error->code); |
| g_error_free (error); |
| } |
| else |
| { |
| g_variant_unref (_ret); |
| } |
| } |
| |
| static void |
| sensor_value_proxy_set_property (GObject *object, |
| guint prop_id, |
| const GValue *value, |
| GParamSpec *pspec G_GNUC_UNUSED) |
| { |
| const _ExtendedGDBusPropertyInfo *info; |
| GVariant *variant; |
| g_assert (prop_id != 0 && prop_id - 1 < 4); |
| info = _sensor_value_property_info_pointers[prop_id - 1]; |
| variant = g_dbus_gvalue_to_gvariant (value, G_VARIANT_TYPE (info->parent_struct.signature)); |
| g_dbus_proxy_call (G_DBUS_PROXY (object), |
| "org.freedesktop.DBus.Properties.Set", |
| g_variant_new ("(ssv)", "org.openbmc.SensorValue", info->parent_struct.name, variant), |
| G_DBUS_CALL_FLAGS_NONE, |
| -1, |
| NULL, (GAsyncReadyCallback) sensor_value_proxy_set_property_cb, (GDBusPropertyInfo *) &info->parent_struct); |
| g_variant_unref (variant); |
| } |
| |
| static void |
| sensor_value_proxy_g_signal (GDBusProxy *proxy, |
| const gchar *sender_name G_GNUC_UNUSED, |
| const gchar *signal_name, |
| GVariant *parameters) |
| { |
| _ExtendedGDBusSignalInfo *info; |
| GVariantIter iter; |
| GVariant *child; |
| GValue *paramv; |
| guint num_params; |
| guint n; |
| guint signal_id; |
| info = (_ExtendedGDBusSignalInfo *) g_dbus_interface_info_lookup_signal ((GDBusInterfaceInfo *) &_sensor_value_interface_info.parent_struct, signal_name); |
| if (info == NULL) |
| return; |
| num_params = g_variant_n_children (parameters); |
| paramv = g_new0 (GValue, num_params + 1); |
| g_value_init (¶mv[0], TYPE_SENSOR_VALUE); |
| g_value_set_object (¶mv[0], proxy); |
| g_variant_iter_init (&iter, parameters); |
| n = 1; |
| while ((child = g_variant_iter_next_value (&iter)) != NULL) |
| { |
| _ExtendedGDBusArgInfo *arg_info = (_ExtendedGDBusArgInfo *) info->parent_struct.args[n - 1]; |
| if (arg_info->use_gvariant) |
| { |
| g_value_init (¶mv[n], G_TYPE_VARIANT); |
| g_value_set_variant (¶mv[n], child); |
| n++; |
| } |
| else |
| g_dbus_gvariant_to_gvalue (child, ¶mv[n++]); |
| g_variant_unref (child); |
| } |
| signal_id = g_signal_lookup (info->signal_name, TYPE_SENSOR_VALUE); |
| g_signal_emitv (paramv, signal_id, 0, NULL); |
| for (n = 0; n < num_params + 1; n++) |
| g_value_unset (¶mv[n]); |
| g_free (paramv); |
| } |
| |
| static void |
| sensor_value_proxy_g_properties_changed (GDBusProxy *_proxy, |
| GVariant *changed_properties, |
| const gchar *const *invalidated_properties) |
| { |
| SensorValueProxy *proxy = SENSOR_VALUE_PROXY (_proxy); |
| guint n; |
| const gchar *key; |
| GVariantIter *iter; |
| _ExtendedGDBusPropertyInfo *info; |
| g_variant_get (changed_properties, "a{sv}", &iter); |
| while (g_variant_iter_next (iter, "{&sv}", &key, NULL)) |
| { |
| info = (_ExtendedGDBusPropertyInfo *) g_dbus_interface_info_lookup_property ((GDBusInterfaceInfo *) &_sensor_value_interface_info.parent_struct, key); |
| g_datalist_remove_data (&proxy->priv->qdata, key); |
| if (info != NULL) |
| g_object_notify (G_OBJECT (proxy), info->hyphen_name); |
| } |
| g_variant_iter_free (iter); |
| for (n = 0; invalidated_properties[n] != NULL; n++) |
| { |
| info = (_ExtendedGDBusPropertyInfo *) g_dbus_interface_info_lookup_property ((GDBusInterfaceInfo *) &_sensor_value_interface_info.parent_struct, invalidated_properties[n]); |
| g_datalist_remove_data (&proxy->priv->qdata, invalidated_properties[n]); |
| if (info != NULL) |
| g_object_notify (G_OBJECT (proxy), info->hyphen_name); |
| } |
| } |
| |
| static GVariant * |
| sensor_value_proxy_get_value (SensorValue *object) |
| { |
| SensorValueProxy *proxy = SENSOR_VALUE_PROXY (object); |
| GVariant *variant; |
| GVariant *value = NULL; |
| variant = g_dbus_proxy_get_cached_property (G_DBUS_PROXY (proxy), "value"); |
| value = variant; |
| if (variant != NULL) |
| g_variant_unref (variant); |
| return value; |
| } |
| |
| static const gchar * |
| sensor_value_proxy_get_units (SensorValue *object) |
| { |
| SensorValueProxy *proxy = SENSOR_VALUE_PROXY (object); |
| GVariant *variant; |
| const gchar *value = NULL; |
| variant = g_dbus_proxy_get_cached_property (G_DBUS_PROXY (proxy), "units"); |
| if (variant != NULL) |
| { |
| value = g_variant_get_string (variant, NULL); |
| g_variant_unref (variant); |
| } |
| return value; |
| } |
| |
| static gint |
| sensor_value_proxy_get_poll_interval (SensorValue *object) |
| { |
| SensorValueProxy *proxy = SENSOR_VALUE_PROXY (object); |
| GVariant *variant; |
| gint value = 0; |
| variant = g_dbus_proxy_get_cached_property (G_DBUS_PROXY (proxy), "poll_interval"); |
| if (variant != NULL) |
| { |
| value = g_variant_get_int32 (variant); |
| g_variant_unref (variant); |
| } |
| return value; |
| } |
| |
| static gint |
| sensor_value_proxy_get_heatbeat (SensorValue *object) |
| { |
| SensorValueProxy *proxy = SENSOR_VALUE_PROXY (object); |
| GVariant *variant; |
| gint value = 0; |
| variant = g_dbus_proxy_get_cached_property (G_DBUS_PROXY (proxy), "heatbeat"); |
| if (variant != NULL) |
| { |
| value = g_variant_get_int32 (variant); |
| g_variant_unref (variant); |
| } |
| return value; |
| } |
| |
| static void |
| sensor_value_proxy_init (SensorValueProxy *proxy) |
| { |
| #if GLIB_VERSION_MAX_ALLOWED >= GLIB_VERSION_2_38 |
| proxy->priv = sensor_value_proxy_get_instance_private (proxy); |
| #else |
| proxy->priv = G_TYPE_INSTANCE_GET_PRIVATE (proxy, TYPE_SENSOR_VALUE_PROXY, SensorValueProxyPrivate); |
| #endif |
| |
| g_dbus_proxy_set_interface_info (G_DBUS_PROXY (proxy), sensor_value_interface_info ()); |
| } |
| |
| static void |
| sensor_value_proxy_class_init (SensorValueProxyClass *klass) |
| { |
| GObjectClass *gobject_class; |
| GDBusProxyClass *proxy_class; |
| |
| gobject_class = G_OBJECT_CLASS (klass); |
| gobject_class->finalize = sensor_value_proxy_finalize; |
| gobject_class->get_property = sensor_value_proxy_get_property; |
| gobject_class->set_property = sensor_value_proxy_set_property; |
| |
| proxy_class = G_DBUS_PROXY_CLASS (klass); |
| proxy_class->g_signal = sensor_value_proxy_g_signal; |
| proxy_class->g_properties_changed = sensor_value_proxy_g_properties_changed; |
| |
| sensor_value_override_properties (gobject_class, 1); |
| |
| #if GLIB_VERSION_MAX_ALLOWED < GLIB_VERSION_2_38 |
| g_type_class_add_private (klass, sizeof (SensorValueProxyPrivate)); |
| #endif |
| } |
| |
| static void |
| sensor_value_proxy_iface_init (SensorValueIface *iface) |
| { |
| iface->get_value = sensor_value_proxy_get_value; |
| iface->get_units = sensor_value_proxy_get_units; |
| iface->get_poll_interval = sensor_value_proxy_get_poll_interval; |
| iface->get_heatbeat = sensor_value_proxy_get_heatbeat; |
| } |
| |
| /** |
| * sensor_value_proxy_new: |
| * @connection: A #GDBusConnection. |
| * @flags: Flags from the #GDBusProxyFlags enumeration. |
| * @name: (allow-none): A bus name (well-known or unique) or %NULL if @connection is not a message bus connection. |
| * @object_path: An object path. |
| * @cancellable: (allow-none): A #GCancellable or %NULL. |
| * @callback: A #GAsyncReadyCallback to call when the request is satisfied. |
| * @user_data: User data to pass to @callback. |
| * |
| * Asynchronously creates a proxy for the D-Bus interface <link linkend="gdbus-interface-org-openbmc-SensorValue.top_of_page">org.openbmc.SensorValue</link>. See g_dbus_proxy_new() for more details. |
| * |
| * When the operation is finished, @callback will be invoked in the <link linkend="g-main-context-push-thread-default">thread-default main loop</link> of the thread you are calling this method from. |
| * You can then call sensor_value_proxy_new_finish() to get the result of the operation. |
| * |
| * See sensor_value_proxy_new_sync() for the synchronous, blocking version of this constructor. |
| */ |
| void |
| sensor_value_proxy_new ( |
| GDBusConnection *connection, |
| GDBusProxyFlags flags, |
| const gchar *name, |
| const gchar *object_path, |
| GCancellable *cancellable, |
| GAsyncReadyCallback callback, |
| gpointer user_data) |
| { |
| g_async_initable_new_async (TYPE_SENSOR_VALUE_PROXY, G_PRIORITY_DEFAULT, cancellable, callback, user_data, "g-flags", flags, "g-name", name, "g-connection", connection, "g-object-path", object_path, "g-interface-name", "org.openbmc.SensorValue", NULL); |
| } |
| |
| /** |
| * sensor_value_proxy_new_finish: |
| * @res: The #GAsyncResult obtained from the #GAsyncReadyCallback passed to sensor_value_proxy_new(). |
| * @error: Return location for error or %NULL |
| * |
| * Finishes an operation started with sensor_value_proxy_new(). |
| * |
| * Returns: (transfer full) (type SensorValueProxy): The constructed proxy object or %NULL if @error is set. |
| */ |
| SensorValue * |
| sensor_value_proxy_new_finish ( |
| GAsyncResult *res, |
| GError **error) |
| { |
| GObject *ret; |
| GObject *source_object; |
| source_object = g_async_result_get_source_object (res); |
| ret = g_async_initable_new_finish (G_ASYNC_INITABLE (source_object), res, error); |
| g_object_unref (source_object); |
| if (ret != NULL) |
| return SENSOR_VALUE (ret); |
| else |
| return NULL; |
| } |
| |
| /** |
| * sensor_value_proxy_new_sync: |
| * @connection: A #GDBusConnection. |
| * @flags: Flags from the #GDBusProxyFlags enumeration. |
| * @name: (allow-none): A bus name (well-known or unique) or %NULL if @connection is not a message bus connection. |
| * @object_path: An object path. |
| * @cancellable: (allow-none): A #GCancellable or %NULL. |
| * @error: Return location for error or %NULL |
| * |
| * Synchronously creates a proxy for the D-Bus interface <link linkend="gdbus-interface-org-openbmc-SensorValue.top_of_page">org.openbmc.SensorValue</link>. See g_dbus_proxy_new_sync() for more details. |
| * |
| * The calling thread is blocked until a reply is received. |
| * |
| * See sensor_value_proxy_new() for the asynchronous version of this constructor. |
| * |
| * Returns: (transfer full) (type SensorValueProxy): The constructed proxy object or %NULL if @error is set. |
| */ |
| SensorValue * |
| sensor_value_proxy_new_sync ( |
| GDBusConnection *connection, |
| GDBusProxyFlags flags, |
| const gchar *name, |
| const gchar *object_path, |
| GCancellable *cancellable, |
| GError **error) |
| { |
| GInitable *ret; |
| ret = g_initable_new (TYPE_SENSOR_VALUE_PROXY, cancellable, error, "g-flags", flags, "g-name", name, "g-connection", connection, "g-object-path", object_path, "g-interface-name", "org.openbmc.SensorValue", NULL); |
| if (ret != NULL) |
| return SENSOR_VALUE (ret); |
| else |
| return NULL; |
| } |
| |
| |
| /** |
| * sensor_value_proxy_new_for_bus: |
| * @bus_type: A #GBusType. |
| * @flags: Flags from the #GDBusProxyFlags enumeration. |
| * @name: A bus name (well-known or unique). |
| * @object_path: An object path. |
| * @cancellable: (allow-none): A #GCancellable or %NULL. |
| * @callback: A #GAsyncReadyCallback to call when the request is satisfied. |
| * @user_data: User data to pass to @callback. |
| * |
| * Like sensor_value_proxy_new() but takes a #GBusType instead of a #GDBusConnection. |
| * |
| * When the operation is finished, @callback will be invoked in the <link linkend="g-main-context-push-thread-default">thread-default main loop</link> of the thread you are calling this method from. |
| * You can then call sensor_value_proxy_new_for_bus_finish() to get the result of the operation. |
| * |
| * See sensor_value_proxy_new_for_bus_sync() for the synchronous, blocking version of this constructor. |
| */ |
| void |
| sensor_value_proxy_new_for_bus ( |
| GBusType bus_type, |
| GDBusProxyFlags flags, |
| const gchar *name, |
| const gchar *object_path, |
| GCancellable *cancellable, |
| GAsyncReadyCallback callback, |
| gpointer user_data) |
| { |
| g_async_initable_new_async (TYPE_SENSOR_VALUE_PROXY, G_PRIORITY_DEFAULT, cancellable, callback, user_data, "g-flags", flags, "g-name", name, "g-bus-type", bus_type, "g-object-path", object_path, "g-interface-name", "org.openbmc.SensorValue", NULL); |
| } |
| |
| /** |
| * sensor_value_proxy_new_for_bus_finish: |
| * @res: The #GAsyncResult obtained from the #GAsyncReadyCallback passed to sensor_value_proxy_new_for_bus(). |
| * @error: Return location for error or %NULL |
| * |
| * Finishes an operation started with sensor_value_proxy_new_for_bus(). |
| * |
| * Returns: (transfer full) (type SensorValueProxy): The constructed proxy object or %NULL if @error is set. |
| */ |
| SensorValue * |
| sensor_value_proxy_new_for_bus_finish ( |
| GAsyncResult *res, |
| GError **error) |
| { |
| GObject *ret; |
| GObject *source_object; |
| source_object = g_async_result_get_source_object (res); |
| ret = g_async_initable_new_finish (G_ASYNC_INITABLE (source_object), res, error); |
| g_object_unref (source_object); |
| if (ret != NULL) |
| return SENSOR_VALUE (ret); |
| else |
| return NULL; |
| } |
| |
| /** |
| * sensor_value_proxy_new_for_bus_sync: |
| * @bus_type: A #GBusType. |
| * @flags: Flags from the #GDBusProxyFlags enumeration. |
| * @name: A bus name (well-known or unique). |
| * @object_path: An object path. |
| * @cancellable: (allow-none): A #GCancellable or %NULL. |
| * @error: Return location for error or %NULL |
| * |
| * Like sensor_value_proxy_new_sync() but takes a #GBusType instead of a #GDBusConnection. |
| * |
| * The calling thread is blocked until a reply is received. |
| * |
| * See sensor_value_proxy_new_for_bus() for the asynchronous version of this constructor. |
| * |
| * Returns: (transfer full) (type SensorValueProxy): The constructed proxy object or %NULL if @error is set. |
| */ |
| SensorValue * |
| sensor_value_proxy_new_for_bus_sync ( |
| GBusType bus_type, |
| GDBusProxyFlags flags, |
| const gchar *name, |
| const gchar *object_path, |
| GCancellable *cancellable, |
| GError **error) |
| { |
| GInitable *ret; |
| ret = g_initable_new (TYPE_SENSOR_VALUE_PROXY, cancellable, error, "g-flags", flags, "g-name", name, "g-bus-type", bus_type, "g-object-path", object_path, "g-interface-name", "org.openbmc.SensorValue", NULL); |
| if (ret != NULL) |
| return SENSOR_VALUE (ret); |
| else |
| return NULL; |
| } |
| |
| |
| /* ------------------------------------------------------------------------ */ |
| |
| /** |
| * SensorValueSkeleton: |
| * |
| * The #SensorValueSkeleton structure contains only private data and should only be accessed using the provided API. |
| */ |
| |
| /** |
| * SensorValueSkeletonClass: |
| * @parent_class: The parent class. |
| * |
| * Class structure for #SensorValueSkeleton. |
| */ |
| |
| struct _SensorValueSkeletonPrivate |
| { |
| GValue *properties; |
| GList *changed_properties; |
| GSource *changed_properties_idle_source; |
| GMainContext *context; |
| GMutex lock; |
| }; |
| |
| static void |
| _sensor_value_skeleton_handle_method_call ( |
| GDBusConnection *connection G_GNUC_UNUSED, |
| const gchar *sender G_GNUC_UNUSED, |
| const gchar *object_path G_GNUC_UNUSED, |
| const gchar *interface_name, |
| const gchar *method_name, |
| GVariant *parameters, |
| GDBusMethodInvocation *invocation, |
| gpointer user_data) |
| { |
| SensorValueSkeleton *skeleton = SENSOR_VALUE_SKELETON (user_data); |
| _ExtendedGDBusMethodInfo *info; |
| GVariantIter iter; |
| GVariant *child; |
| GValue *paramv; |
| guint num_params; |
| guint num_extra; |
| guint n; |
| guint signal_id; |
| GValue return_value = G_VALUE_INIT; |
| info = (_ExtendedGDBusMethodInfo *) g_dbus_method_invocation_get_method_info (invocation); |
| g_assert (info != NULL); |
| num_params = g_variant_n_children (parameters); |
| num_extra = info->pass_fdlist ? 3 : 2; paramv = g_new0 (GValue, num_params + num_extra); |
| n = 0; |
| g_value_init (¶mv[n], TYPE_SENSOR_VALUE); |
| g_value_set_object (¶mv[n++], skeleton); |
| g_value_init (¶mv[n], G_TYPE_DBUS_METHOD_INVOCATION); |
| g_value_set_object (¶mv[n++], invocation); |
| if (info->pass_fdlist) |
| { |
| #ifdef G_OS_UNIX |
| g_value_init (¶mv[n], G_TYPE_UNIX_FD_LIST); |
| g_value_set_object (¶mv[n++], g_dbus_message_get_unix_fd_list (g_dbus_method_invocation_get_message (invocation))); |
| #else |
| g_assert_not_reached (); |
| #endif |
| } |
| g_variant_iter_init (&iter, parameters); |
| while ((child = g_variant_iter_next_value (&iter)) != NULL) |
| { |
| _ExtendedGDBusArgInfo *arg_info = (_ExtendedGDBusArgInfo *) info->parent_struct.in_args[n - num_extra]; |
| if (arg_info->use_gvariant) |
| { |
| g_value_init (¶mv[n], G_TYPE_VARIANT); |
| g_value_set_variant (¶mv[n], child); |
| n++; |
| } |
| else |
| g_dbus_gvariant_to_gvalue (child, ¶mv[n++]); |
| g_variant_unref (child); |
| } |
| signal_id = g_signal_lookup (info->signal_name, TYPE_SENSOR_VALUE); |
| g_value_init (&return_value, G_TYPE_BOOLEAN); |
| g_signal_emitv (paramv, signal_id, 0, &return_value); |
| if (!g_value_get_boolean (&return_value)) |
| g_dbus_method_invocation_return_error (invocation, G_DBUS_ERROR, G_DBUS_ERROR_UNKNOWN_METHOD, "Method %s is not implemented on interface %s", method_name, interface_name); |
| g_value_unset (&return_value); |
| for (n = 0; n < num_params + num_extra; n++) |
| g_value_unset (¶mv[n]); |
| g_free (paramv); |
| } |
| |
| static GVariant * |
| _sensor_value_skeleton_handle_get_property ( |
| GDBusConnection *connection G_GNUC_UNUSED, |
| const gchar *sender G_GNUC_UNUSED, |
| const gchar *object_path G_GNUC_UNUSED, |
| const gchar *interface_name G_GNUC_UNUSED, |
| const gchar *property_name, |
| GError **error, |
| gpointer user_data) |
| { |
| SensorValueSkeleton *skeleton = SENSOR_VALUE_SKELETON (user_data); |
| GValue value = G_VALUE_INIT; |
| GParamSpec *pspec; |
| _ExtendedGDBusPropertyInfo *info; |
| GVariant *ret; |
| ret = NULL; |
| info = (_ExtendedGDBusPropertyInfo *) g_dbus_interface_info_lookup_property ((GDBusInterfaceInfo *) &_sensor_value_interface_info.parent_struct, property_name); |
| g_assert (info != NULL); |
| pspec = g_object_class_find_property (G_OBJECT_GET_CLASS (skeleton), info->hyphen_name); |
| if (pspec == NULL) |
| { |
| g_set_error (error, G_DBUS_ERROR, G_DBUS_ERROR_INVALID_ARGS, "No property with name %s", property_name); |
| } |
| else |
| { |
| g_value_init (&value, pspec->value_type); |
| g_object_get_property (G_OBJECT (skeleton), info->hyphen_name, &value); |
| ret = g_dbus_gvalue_to_gvariant (&value, G_VARIANT_TYPE (info->parent_struct.signature)); |
| g_value_unset (&value); |
| } |
| return ret; |
| } |
| |
| static gboolean |
| _sensor_value_skeleton_handle_set_property ( |
| GDBusConnection *connection G_GNUC_UNUSED, |
| const gchar *sender G_GNUC_UNUSED, |
| const gchar *object_path G_GNUC_UNUSED, |
| const gchar *interface_name G_GNUC_UNUSED, |
| const gchar *property_name, |
| GVariant *variant, |
| GError **error, |
| gpointer user_data) |
| { |
| SensorValueSkeleton *skeleton = SENSOR_VALUE_SKELETON (user_data); |
| GValue value = G_VALUE_INIT; |
| GParamSpec *pspec; |
| _ExtendedGDBusPropertyInfo *info; |
| gboolean ret; |
| ret = FALSE; |
| info = (_ExtendedGDBusPropertyInfo *) g_dbus_interface_info_lookup_property ((GDBusInterfaceInfo *) &_sensor_value_interface_info.parent_struct, property_name); |
| g_assert (info != NULL); |
| pspec = g_object_class_find_property (G_OBJECT_GET_CLASS (skeleton), info->hyphen_name); |
| if (pspec == NULL) |
| { |
| g_set_error (error, G_DBUS_ERROR, G_DBUS_ERROR_INVALID_ARGS, "No property with name %s", property_name); |
| } |
| else |
| { |
| if (info->use_gvariant) |
| g_value_set_variant (&value, variant); |
| else |
| g_dbus_gvariant_to_gvalue (variant, &value); |
| g_object_set_property (G_OBJECT (skeleton), info->hyphen_name, &value); |
| g_value_unset (&value); |
| ret = TRUE; |
| } |
| return ret; |
| } |
| |
| static const GDBusInterfaceVTable _sensor_value_skeleton_vtable = |
| { |
| _sensor_value_skeleton_handle_method_call, |
| _sensor_value_skeleton_handle_get_property, |
| _sensor_value_skeleton_handle_set_property, |
| {NULL} |
| }; |
| |
| static GDBusInterfaceInfo * |
| sensor_value_skeleton_dbus_interface_get_info (GDBusInterfaceSkeleton *skeleton G_GNUC_UNUSED) |
| { |
| return sensor_value_interface_info (); |
| } |
| |
| static GDBusInterfaceVTable * |
| sensor_value_skeleton_dbus_interface_get_vtable (GDBusInterfaceSkeleton *skeleton G_GNUC_UNUSED) |
| { |
| return (GDBusInterfaceVTable *) &_sensor_value_skeleton_vtable; |
| } |
| |
| static GVariant * |
| sensor_value_skeleton_dbus_interface_get_properties (GDBusInterfaceSkeleton *_skeleton) |
| { |
| SensorValueSkeleton *skeleton = SENSOR_VALUE_SKELETON (_skeleton); |
| |
| GVariantBuilder builder; |
| guint n; |
| g_variant_builder_init (&builder, G_VARIANT_TYPE ("a{sv}")); |
| if (_sensor_value_interface_info.parent_struct.properties == NULL) |
| goto out; |
| for (n = 0; _sensor_value_interface_info.parent_struct.properties[n] != NULL; n++) |
| { |
| GDBusPropertyInfo *info = _sensor_value_interface_info.parent_struct.properties[n]; |
| if (info->flags & G_DBUS_PROPERTY_INFO_FLAGS_READABLE) |
| { |
| GVariant *value; |
| value = _sensor_value_skeleton_handle_get_property (g_dbus_interface_skeleton_get_connection (G_DBUS_INTERFACE_SKELETON (skeleton)), NULL, g_dbus_interface_skeleton_get_object_path (G_DBUS_INTERFACE_SKELETON (skeleton)), "org.openbmc.SensorValue", info->name, NULL, skeleton); |
| if (value != NULL) |
| { |
| g_variant_take_ref (value); |
| g_variant_builder_add (&builder, "{sv}", info->name, value); |
| g_variant_unref (value); |
| } |
| } |
| } |
| out: |
| return g_variant_builder_end (&builder); |
| } |
| |
| static gboolean _sensor_value_emit_changed (gpointer user_data); |
| |
| static void |
| sensor_value_skeleton_dbus_interface_flush (GDBusInterfaceSkeleton *_skeleton) |
| { |
| SensorValueSkeleton *skeleton = SENSOR_VALUE_SKELETON (_skeleton); |
| gboolean emit_changed = FALSE; |
| |
| g_mutex_lock (&skeleton->priv->lock); |
| if (skeleton->priv->changed_properties_idle_source != NULL) |
| { |
| g_source_destroy (skeleton->priv->changed_properties_idle_source); |
| skeleton->priv->changed_properties_idle_source = NULL; |
| emit_changed = TRUE; |
| } |
| g_mutex_unlock (&skeleton->priv->lock); |
| |
| if (emit_changed) |
| _sensor_value_emit_changed (skeleton); |
| } |
| |
| static void |
| _sensor_value_on_signal_changed ( |
| SensorValue *object, |
| GVariant *arg_value, |
| const gchar *arg_units) |
| { |
| SensorValueSkeleton *skeleton = SENSOR_VALUE_SKELETON (object); |
| |
| GList *connections, *l; |
| GVariant *signal_variant; |
| connections = g_dbus_interface_skeleton_get_connections (G_DBUS_INTERFACE_SKELETON (skeleton)); |
| |
| signal_variant = g_variant_ref_sink (g_variant_new ("(@vs)", |
| arg_value, |
| arg_units)); |
| for (l = connections; l != NULL; l = l->next) |
| { |
| GDBusConnection *connection = l->data; |
| g_dbus_connection_emit_signal (connection, |
| NULL, g_dbus_interface_skeleton_get_object_path (G_DBUS_INTERFACE_SKELETON (skeleton)), "org.openbmc.SensorValue", "Changed", |
| signal_variant, NULL); |
| } |
| g_variant_unref (signal_variant); |
| g_list_free_full (connections, g_object_unref); |
| } |
| |
| static void |
| _sensor_value_on_signal_heartbeat ( |
| SensorValue *object, |
| const gchar *arg_bus_name) |
| { |
| SensorValueSkeleton *skeleton = SENSOR_VALUE_SKELETON (object); |
| |
| GList *connections, *l; |
| GVariant *signal_variant; |
| connections = g_dbus_interface_skeleton_get_connections (G_DBUS_INTERFACE_SKELETON (skeleton)); |
| |
| signal_variant = g_variant_ref_sink (g_variant_new ("(s)", |
| arg_bus_name)); |
| for (l = connections; l != NULL; l = l->next) |
| { |
| GDBusConnection *connection = l->data; |
| g_dbus_connection_emit_signal (connection, |
| NULL, g_dbus_interface_skeleton_get_object_path (G_DBUS_INTERFACE_SKELETON (skeleton)), "org.openbmc.SensorValue", "Heartbeat", |
| signal_variant, NULL); |
| } |
| g_variant_unref (signal_variant); |
| g_list_free_full (connections, g_object_unref); |
| } |
| |
| static void sensor_value_skeleton_iface_init (SensorValueIface *iface); |
| #if GLIB_VERSION_MAX_ALLOWED >= GLIB_VERSION_2_38 |
| G_DEFINE_TYPE_WITH_CODE (SensorValueSkeleton, sensor_value_skeleton, G_TYPE_DBUS_INTERFACE_SKELETON, |
| G_ADD_PRIVATE (SensorValueSkeleton) |
| G_IMPLEMENT_INTERFACE (TYPE_SENSOR_VALUE, sensor_value_skeleton_iface_init)); |
| |
| #else |
| G_DEFINE_TYPE_WITH_CODE (SensorValueSkeleton, sensor_value_skeleton, G_TYPE_DBUS_INTERFACE_SKELETON, |
| G_IMPLEMENT_INTERFACE (TYPE_SENSOR_VALUE, sensor_value_skeleton_iface_init)); |
| |
| #endif |
| static void |
| sensor_value_skeleton_finalize (GObject *object) |
| { |
| SensorValueSkeleton *skeleton = SENSOR_VALUE_SKELETON (object); |
| guint n; |
| for (n = 0; n < 4; n++) |
| g_value_unset (&skeleton->priv->properties[n]); |
| g_free (skeleton->priv->properties); |
| g_list_free_full (skeleton->priv->changed_properties, (GDestroyNotify) _changed_property_free); |
| if (skeleton->priv->changed_properties_idle_source != NULL) |
| g_source_destroy (skeleton->priv->changed_properties_idle_source); |
| g_main_context_unref (skeleton->priv->context); |
| g_mutex_clear (&skeleton->priv->lock); |
| G_OBJECT_CLASS (sensor_value_skeleton_parent_class)->finalize (object); |
| } |
| |
| static void |
| sensor_value_skeleton_get_property (GObject *object, |
| guint prop_id, |
| GValue *value, |
| GParamSpec *pspec G_GNUC_UNUSED) |
| { |
| SensorValueSkeleton *skeleton = SENSOR_VALUE_SKELETON (object); |
| g_assert (prop_id != 0 && prop_id - 1 < 4); |
| g_mutex_lock (&skeleton->priv->lock); |
| g_value_copy (&skeleton->priv->properties[prop_id - 1], value); |
| g_mutex_unlock (&skeleton->priv->lock); |
| } |
| |
| static gboolean |
| _sensor_value_emit_changed (gpointer user_data) |
| { |
| SensorValueSkeleton *skeleton = SENSOR_VALUE_SKELETON (user_data); |
| GList *l; |
| GVariantBuilder builder; |
| GVariantBuilder invalidated_builder; |
| guint num_changes; |
| |
| g_mutex_lock (&skeleton->priv->lock); |
| g_variant_builder_init (&builder, G_VARIANT_TYPE ("a{sv}")); |
| g_variant_builder_init (&invalidated_builder, G_VARIANT_TYPE ("as")); |
| for (l = skeleton->priv->changed_properties, num_changes = 0; l != NULL; l = l->next) |
| { |
| ChangedProperty *cp = l->data; |
| GVariant *variant; |
| const GValue *cur_value; |
| |
| cur_value = &skeleton->priv->properties[cp->prop_id - 1]; |
| if (!_g_value_equal (cur_value, &cp->orig_value)) |
| { |
| variant = g_dbus_gvalue_to_gvariant (cur_value, G_VARIANT_TYPE (cp->info->parent_struct.signature)); |
| g_variant_builder_add (&builder, "{sv}", cp->info->parent_struct.name, variant); |
| g_variant_unref (variant); |
| num_changes++; |
| } |
| } |
| if (num_changes > 0) |
| { |
| GList *connections, *ll; |
| GVariant *signal_variant; |
| signal_variant = g_variant_ref_sink (g_variant_new ("(sa{sv}as)", "org.openbmc.SensorValue", |
| &builder, &invalidated_builder)); |
| connections = g_dbus_interface_skeleton_get_connections (G_DBUS_INTERFACE_SKELETON (skeleton)); |
| for (ll = connections; ll != NULL; ll = ll->next) |
| { |
| GDBusConnection *connection = ll->data; |
| |
| g_dbus_connection_emit_signal (connection, |
| NULL, g_dbus_interface_skeleton_get_object_path (G_DBUS_INTERFACE_SKELETON (skeleton)), |
| "org.freedesktop.DBus.Properties", |
| "PropertiesChanged", |
| signal_variant, |
| NULL); |
| } |
| g_variant_unref (signal_variant); |
| g_list_free_full (connections, g_object_unref); |
| } |
| else |
| { |
| g_variant_builder_clear (&builder); |
| g_variant_builder_clear (&invalidated_builder); |
| } |
| g_list_free_full (skeleton->priv->changed_properties, (GDestroyNotify) _changed_property_free); |
| skeleton->priv->changed_properties = NULL; |
| skeleton->priv->changed_properties_idle_source = NULL; |
| g_mutex_unlock (&skeleton->priv->lock); |
| return FALSE; |
| } |
| |
| static void |
| _sensor_value_schedule_emit_changed (SensorValueSkeleton *skeleton, const _ExtendedGDBusPropertyInfo *info, guint prop_id, const GValue *orig_value) |
| { |
| ChangedProperty *cp; |
| GList *l; |
| cp = NULL; |
| for (l = skeleton->priv->changed_properties; l != NULL; l = l->next) |
| { |
| ChangedProperty *i_cp = l->data; |
| if (i_cp->info == info) |
| { |
| cp = i_cp; |
| break; |
| } |
| } |
| if (cp == NULL) |
| { |
| cp = g_new0 (ChangedProperty, 1); |
| cp->prop_id = prop_id; |
| cp->info = info; |
| skeleton->priv->changed_properties = g_list_prepend (skeleton->priv->changed_properties, cp); |
| g_value_init (&cp->orig_value, G_VALUE_TYPE (orig_value)); |
| g_value_copy (orig_value, &cp->orig_value); |
| } |
| } |
| |
| static void |
| sensor_value_skeleton_notify (GObject *object, |
| GParamSpec *pspec G_GNUC_UNUSED) |
| { |
| SensorValueSkeleton *skeleton = SENSOR_VALUE_SKELETON (object); |
| g_mutex_lock (&skeleton->priv->lock); |
| if (skeleton->priv->changed_properties != NULL && |
| skeleton->priv->changed_properties_idle_source == NULL) |
| { |
| skeleton->priv->changed_properties_idle_source = g_idle_source_new (); |
| g_source_set_priority (skeleton->priv->changed_properties_idle_source, G_PRIORITY_DEFAULT); |
| g_source_set_callback (skeleton->priv->changed_properties_idle_source, _sensor_value_emit_changed, g_object_ref (skeleton), (GDestroyNotify) g_object_unref); |
| g_source_attach (skeleton->priv->changed_properties_idle_source, skeleton->priv->context); |
| g_source_unref (skeleton->priv->changed_properties_idle_source); |
| } |
| g_mutex_unlock (&skeleton->priv->lock); |
| } |
| |
| static void |
| sensor_value_skeleton_set_property (GObject *object, |
| guint prop_id, |
| const GValue *value, |
| GParamSpec *pspec) |
| { |
| SensorValueSkeleton *skeleton = SENSOR_VALUE_SKELETON (object); |
| g_assert (prop_id != 0 && prop_id - 1 < 4); |
| g_mutex_lock (&skeleton->priv->lock); |
| g_object_freeze_notify (object); |
| if (!_g_value_equal (value, &skeleton->priv->properties[prop_id - 1])) |
| { |
| if (g_dbus_interface_skeleton_get_connection (G_DBUS_INTERFACE_SKELETON (skeleton)) != NULL) |
| _sensor_value_schedule_emit_changed (skeleton, _sensor_value_property_info_pointers[prop_id - 1], prop_id, &skeleton->priv->properties[prop_id - 1]); |
| g_value_copy (value, &skeleton->priv->properties[prop_id - 1]); |
| g_object_notify_by_pspec (object, pspec); |
| } |
| g_mutex_unlock (&skeleton->priv->lock); |
| g_object_thaw_notify (object); |
| } |
| |
| static void |
| sensor_value_skeleton_init (SensorValueSkeleton *skeleton) |
| { |
| #if GLIB_VERSION_MAX_ALLOWED >= GLIB_VERSION_2_38 |
| skeleton->priv = sensor_value_skeleton_get_instance_private (skeleton); |
| #else |
| skeleton->priv = G_TYPE_INSTANCE_GET_PRIVATE (skeleton, TYPE_SENSOR_VALUE_SKELETON, SensorValueSkeletonPrivate); |
| #endif |
| |
| g_mutex_init (&skeleton->priv->lock); |
| skeleton->priv->context = g_main_context_ref_thread_default (); |
| skeleton->priv->properties = g_new0 (GValue, 4); |
| g_value_init (&skeleton->priv->properties[0], G_TYPE_VARIANT); |
| g_value_init (&skeleton->priv->properties[1], G_TYPE_STRING); |
| g_value_init (&skeleton->priv->properties[2], G_TYPE_INT); |
| g_value_init (&skeleton->priv->properties[3], G_TYPE_INT); |
| } |
| |
| static GVariant * |
| sensor_value_skeleton_get_value (SensorValue *object) |
| { |
| SensorValueSkeleton *skeleton = SENSOR_VALUE_SKELETON (object); |
| GVariant *value; |
| g_mutex_lock (&skeleton->priv->lock); |
| value = g_value_get_variant (&(skeleton->priv->properties[0])); |
| g_mutex_unlock (&skeleton->priv->lock); |
| return value; |
| } |
| |
| static const gchar * |
| sensor_value_skeleton_get_units (SensorValue *object) |
| { |
| SensorValueSkeleton *skeleton = SENSOR_VALUE_SKELETON (object); |
| const gchar *value; |
| g_mutex_lock (&skeleton->priv->lock); |
| value = g_value_get_string (&(skeleton->priv->properties[1])); |
| g_mutex_unlock (&skeleton->priv->lock); |
| return value; |
| } |
| |
| static gint |
| sensor_value_skeleton_get_poll_interval (SensorValue *object) |
| { |
| SensorValueSkeleton *skeleton = SENSOR_VALUE_SKELETON (object); |
| gint value; |
| g_mutex_lock (&skeleton->priv->lock); |
| value = g_value_get_int (&(skeleton->priv->properties[2])); |
| g_mutex_unlock (&skeleton->priv->lock); |
| return value; |
| } |
| |
| static gint |
| sensor_value_skeleton_get_heatbeat (SensorValue *object) |
| { |
| SensorValueSkeleton *skeleton = SENSOR_VALUE_SKELETON (object); |
| gint value; |
| g_mutex_lock (&skeleton->priv->lock); |
| value = g_value_get_int (&(skeleton->priv->properties[3])); |
| g_mutex_unlock (&skeleton->priv->lock); |
| return value; |
| } |
| |
| static void |
| sensor_value_skeleton_class_init (SensorValueSkeletonClass *klass) |
| { |
| GObjectClass *gobject_class; |
| GDBusInterfaceSkeletonClass *skeleton_class; |
| |
| gobject_class = G_OBJECT_CLASS (klass); |
| gobject_class->finalize = sensor_value_skeleton_finalize; |
| gobject_class->get_property = sensor_value_skeleton_get_property; |
| gobject_class->set_property = sensor_value_skeleton_set_property; |
| gobject_class->notify = sensor_value_skeleton_notify; |
| |
| |
| sensor_value_override_properties (gobject_class, 1); |
| |
| skeleton_class = G_DBUS_INTERFACE_SKELETON_CLASS (klass); |
| skeleton_class->get_info = sensor_value_skeleton_dbus_interface_get_info; |
| skeleton_class->get_properties = sensor_value_skeleton_dbus_interface_get_properties; |
| skeleton_class->flush = sensor_value_skeleton_dbus_interface_flush; |
| skeleton_class->get_vtable = sensor_value_skeleton_dbus_interface_get_vtable; |
| |
| #if GLIB_VERSION_MAX_ALLOWED < GLIB_VERSION_2_38 |
| g_type_class_add_private (klass, sizeof (SensorValueSkeletonPrivate)); |
| #endif |
| } |
| |
| static void |
| sensor_value_skeleton_iface_init (SensorValueIface *iface) |
| { |
| iface->changed = _sensor_value_on_signal_changed; |
| iface->heartbeat = _sensor_value_on_signal_heartbeat; |
| iface->get_value = sensor_value_skeleton_get_value; |
| iface->get_units = sensor_value_skeleton_get_units; |
| iface->get_poll_interval = sensor_value_skeleton_get_poll_interval; |
| iface->get_heatbeat = sensor_value_skeleton_get_heatbeat; |
| } |
| |
| /** |
| * sensor_value_skeleton_new: |
| * |
| * Creates a skeleton object for the D-Bus interface <link linkend="gdbus-interface-org-openbmc-SensorValue.top_of_page">org.openbmc.SensorValue</link>. |
| * |
| * Returns: (transfer full) (type SensorValueSkeleton): The skeleton object. |
| */ |
| SensorValue * |
| sensor_value_skeleton_new (void) |
| { |
| return SENSOR_VALUE (g_object_new (TYPE_SENSOR_VALUE_SKELETON, NULL)); |
| } |
| |
| /* ------------------------------------------------------------------------ |
| * Code for interface org.openbmc.SensorThreshold |
| * ------------------------------------------------------------------------ |
| */ |
| |
| /** |
| * SECTION:SensorThreshold |
| * @title: SensorThreshold |
| * @short_description: Generated C code for the org.openbmc.SensorThreshold D-Bus interface |
| * |
| * This section contains code for working with the <link linkend="gdbus-interface-org-openbmc-SensorThreshold.top_of_page">org.openbmc.SensorThreshold</link> D-Bus interface in C. |
| */ |
| |
| /* ---- Introspection data for org.openbmc.SensorThreshold ---- */ |
| |
| static const _ExtendedGDBusArgInfo _sensor_threshold_method_info_get_state_OUT_ARG_state = |
| { |
| { |
| -1, |
| (gchar *) "state", |
| (gchar *) "y", |
| NULL |
| }, |
| FALSE |
| }; |
| |
| static const _ExtendedGDBusArgInfo * const _sensor_threshold_method_info_get_state_OUT_ARG_pointers[] = |
| { |
| &_sensor_threshold_method_info_get_state_OUT_ARG_state, |
| NULL |
| }; |
| |
| static const _ExtendedGDBusMethodInfo _sensor_threshold_method_info_get_state = |
| { |
| { |
| -1, |
| (gchar *) "getState", |
| NULL, |
| (GDBusArgInfo **) &_sensor_threshold_method_info_get_state_OUT_ARG_pointers, |
| NULL |
| }, |
| "handle-get-state", |
| FALSE |
| }; |
| |
| static const _ExtendedGDBusMethodInfo * const _sensor_threshold_method_info_pointers[] = |
| { |
| &_sensor_threshold_method_info_get_state, |
| NULL |
| }; |
| |
| static const _ExtendedGDBusSignalInfo _sensor_threshold_signal_info_warning = |
| { |
| { |
| -1, |
| (gchar *) "Warning", |
| NULL, |
| NULL |
| }, |
| "warning" |
| }; |
| |
| static const _ExtendedGDBusSignalInfo _sensor_threshold_signal_info_critical = |
| { |
| { |
| -1, |
| (gchar *) "Critical", |
| NULL, |
| NULL |
| }, |
| "critical" |
| }; |
| |
| static const _ExtendedGDBusSignalInfo _sensor_threshold_signal_info_normal = |
| { |
| { |
| -1, |
| (gchar *) "Normal", |
| NULL, |
| NULL |
| }, |
| "normal" |
| }; |
| |
| static const _ExtendedGDBusSignalInfo * const _sensor_threshold_signal_info_pointers[] = |
| { |
| &_sensor_threshold_signal_info_warning, |
| &_sensor_threshold_signal_info_critical, |
| &_sensor_threshold_signal_info_normal, |
| NULL |
| }; |
| |
| static const _ExtendedGDBusPropertyInfo _sensor_threshold_property_info_lower_critical = |
| { |
| { |
| -1, |
| (gchar *) "lower_critical", |
| (gchar *) "v", |
| G_DBUS_PROPERTY_INFO_FLAGS_READABLE | G_DBUS_PROPERTY_INFO_FLAGS_WRITABLE, |
| NULL |
| }, |
| "lower-critical", |
| FALSE |
| }; |
| |
| static const _ExtendedGDBusPropertyInfo _sensor_threshold_property_info_lower_warning = |
| { |
| { |
| -1, |
| (gchar *) "lower_warning", |
| (gchar *) "v", |
| G_DBUS_PROPERTY_INFO_FLAGS_READABLE | G_DBUS_PROPERTY_INFO_FLAGS_WRITABLE, |
| NULL |
| }, |
| "lower-warning", |
| FALSE |
| }; |
| |
| static const _ExtendedGDBusPropertyInfo _sensor_threshold_property_info_upper_warning = |
| { |
| { |
| -1, |
| (gchar *) "upper_warning", |
| (gchar *) "v", |
| G_DBUS_PROPERTY_INFO_FLAGS_READABLE | G_DBUS_PROPERTY_INFO_FLAGS_WRITABLE, |
| NULL |
| }, |
| "upper-warning", |
| FALSE |
| }; |
| |
| static const _ExtendedGDBusPropertyInfo _sensor_threshold_property_info_upper_critical = |
| { |
| { |
| -1, |
| (gchar *) "upper_critical", |
| (gchar *) "v", |
| G_DBUS_PROPERTY_INFO_FLAGS_READABLE | G_DBUS_PROPERTY_INFO_FLAGS_WRITABLE, |
| NULL |
| }, |
| "upper-critical", |
| FALSE |
| }; |
| |
| static const _ExtendedGDBusPropertyInfo _sensor_threshold_property_info_state = |
| { |
| { |
| -1, |
| (gchar *) "state", |
| (gchar *) "y", |
| G_DBUS_PROPERTY_INFO_FLAGS_READABLE, |
| NULL |
| }, |
| "state", |
| FALSE |
| }; |
| |
| static const _ExtendedGDBusPropertyInfo * const _sensor_threshold_property_info_pointers[] = |
| { |
| &_sensor_threshold_property_info_lower_critical, |
| &_sensor_threshold_property_info_lower_warning, |
| &_sensor_threshold_property_info_upper_warning, |
| &_sensor_threshold_property_info_upper_critical, |
| &_sensor_threshold_property_info_state, |
| NULL |
| }; |
| |
| static const _ExtendedGDBusInterfaceInfo _sensor_threshold_interface_info = |
| { |
| { |
| -1, |
| (gchar *) "org.openbmc.SensorThreshold", |
| (GDBusMethodInfo **) &_sensor_threshold_method_info_pointers, |
| (GDBusSignalInfo **) &_sensor_threshold_signal_info_pointers, |
| (GDBusPropertyInfo **) &_sensor_threshold_property_info_pointers, |
| NULL |
| }, |
| "sensor-threshold", |
| }; |
| |
| |
| /** |
| * sensor_threshold_interface_info: |
| * |
| * Gets a machine-readable description of the <link linkend="gdbus-interface-org-openbmc-SensorThreshold.top_of_page">org.openbmc.SensorThreshold</link> D-Bus interface. |
| * |
| * Returns: (transfer none): A #GDBusInterfaceInfo. Do not free. |
| */ |
| GDBusInterfaceInfo * |
| sensor_threshold_interface_info (void) |
| { |
| return (GDBusInterfaceInfo *) &_sensor_threshold_interface_info.parent_struct; |
| } |
| |
| /** |
| * sensor_threshold_override_properties: |
| * @klass: The class structure for a #GObject<!-- -->-derived class. |
| * @property_id_begin: The property id to assign to the first overridden property. |
| * |
| * Overrides all #GObject properties in the #SensorThreshold interface for a concrete class. |
| * The properties are overridden in the order they are defined. |
| * |
| * Returns: The last property id. |
| */ |
| guint |
| sensor_threshold_override_properties (GObjectClass *klass, guint property_id_begin) |
| { |
| g_object_class_override_property (klass, property_id_begin++, "lower-critical"); |
| g_object_class_override_property (klass, property_id_begin++, "lower-warning"); |
| g_object_class_override_property (klass, property_id_begin++, "upper-warning"); |
| g_object_class_override_property (klass, property_id_begin++, "upper-critical"); |
| g_object_class_override_property (klass, property_id_begin++, "state"); |
| return property_id_begin - 1; |
| } |
| |
| |
| |
| /** |
| * SensorThreshold: |
| * |
| * Abstract interface type for the D-Bus interface <link linkend="gdbus-interface-org-openbmc-SensorThreshold.top_of_page">org.openbmc.SensorThreshold</link>. |
| */ |
| |
| /** |
| * SensorThresholdIface: |
| * @parent_iface: The parent interface. |
| * @handle_get_state: Handler for the #SensorThreshold::handle-get-state signal. |
| * @get_lower_critical: Getter for the #SensorThreshold:lower-critical property. |
| * @get_lower_warning: Getter for the #SensorThreshold:lower-warning property. |
| * @get_state: Getter for the #SensorThreshold:state property. |
| * @get_upper_critical: Getter for the #SensorThreshold:upper-critical property. |
| * @get_upper_warning: Getter for the #SensorThreshold:upper-warning property. |
| * @critical: Handler for the #SensorThreshold::critical signal. |
| * @normal: Handler for the #SensorThreshold::normal signal. |
| * @warning: Handler for the #SensorThreshold::warning signal. |
| * |
| * Virtual table for the D-Bus interface <link linkend="gdbus-interface-org-openbmc-SensorThreshold.top_of_page">org.openbmc.SensorThreshold</link>. |
| */ |
| |
| typedef SensorThresholdIface SensorThresholdInterface; |
| G_DEFINE_INTERFACE (SensorThreshold, sensor_threshold, G_TYPE_OBJECT); |
| |
| static void |
| sensor_threshold_default_init (SensorThresholdIface *iface) |
| { |
| /* GObject signals for incoming D-Bus method calls: */ |
| /** |
| * SensorThreshold::handle-get-state: |
| * @object: A #SensorThreshold. |
| * @invocation: A #GDBusMethodInvocation. |
| * |
| * Signal emitted when a remote caller is invoking the <link linkend="gdbus-method-org-openbmc-SensorThreshold.getState">getState()</link> D-Bus method. |
| * |
| * If a signal handler returns %TRUE, it means the signal handler will handle the invocation (e.g. take a reference to @invocation and eventually call sensor_threshold_complete_get_state() or e.g. g_dbus_method_invocation_return_error() on it) and no order signal handlers will run. If no signal handler handles the invocation, the %G_DBUS_ERROR_UNKNOWN_METHOD error is returned. |
| * |
| * Returns: %TRUE if the invocation was handled, %FALSE to let other signal handlers run. |
| */ |
| g_signal_new ("handle-get-state", |
| G_TYPE_FROM_INTERFACE (iface), |
| G_SIGNAL_RUN_LAST, |
| G_STRUCT_OFFSET (SensorThresholdIface, handle_get_state), |
| g_signal_accumulator_true_handled, |
| NULL, |
| g_cclosure_marshal_generic, |
| G_TYPE_BOOLEAN, |
| 1, |
| G_TYPE_DBUS_METHOD_INVOCATION); |
| |
| /* GObject signals for received D-Bus signals: */ |
| /** |
| * SensorThreshold::warning: |
| * @object: A #SensorThreshold. |
| * |
| * On the client-side, this signal is emitted whenever the D-Bus signal <link linkend="gdbus-signal-org-openbmc-SensorThreshold.Warning">"Warning"</link> is received. |
| * |
| * On the service-side, this signal can be used with e.g. g_signal_emit_by_name() to make the object emit the D-Bus signal. |
| */ |
| g_signal_new ("warning", |
| G_TYPE_FROM_INTERFACE (iface), |
| G_SIGNAL_RUN_LAST, |
| G_STRUCT_OFFSET (SensorThresholdIface, warning), |
| NULL, |
| NULL, |
| g_cclosure_marshal_generic, |
| G_TYPE_NONE, |
| 0); |
| |
| /** |
| * SensorThreshold::critical: |
| * @object: A #SensorThreshold. |
| * |
| * On the client-side, this signal is emitted whenever the D-Bus signal <link linkend="gdbus-signal-org-openbmc-SensorThreshold.Critical">"Critical"</link> is received. |
| * |
| * On the service-side, this signal can be used with e.g. g_signal_emit_by_name() to make the object emit the D-Bus signal. |
| */ |
| g_signal_new ("critical", |
| G_TYPE_FROM_INTERFACE (iface), |
| G_SIGNAL_RUN_LAST, |
| G_STRUCT_OFFSET (SensorThresholdIface, critical), |
| NULL, |
| NULL, |
| g_cclosure_marshal_generic, |
| G_TYPE_NONE, |
| 0); |
| |
| /** |
| * SensorThreshold::normal: |
| * @object: A #SensorThreshold. |
| * |
| * On the client-side, this signal is emitted whenever the D-Bus signal <link linkend="gdbus-signal-org-openbmc-SensorThreshold.Normal">"Normal"</link> is received. |
| * |
| * On the service-side, this signal can be used with e.g. g_signal_emit_by_name() to make the object emit the D-Bus signal. |
| */ |
| g_signal_new ("normal", |
| G_TYPE_FROM_INTERFACE (iface), |
| G_SIGNAL_RUN_LAST, |
| G_STRUCT_OFFSET (SensorThresholdIface, normal), |
| NULL, |
| NULL, |
| g_cclosure_marshal_generic, |
| G_TYPE_NONE, |
| 0); |
| |
| /* GObject properties for D-Bus properties: */ |
| /** |
| * SensorThreshold:lower-critical: |
| * |
| * Represents the D-Bus property <link linkend="gdbus-property-org-openbmc-SensorThreshold.lower_critical">"lower_critical"</link>. |
| * |
| * Since the D-Bus property for this #GObject property is both readable and writable, it is meaningful to both read from it and write to it on both the service- and client-side. |
| */ |
| g_object_interface_install_property (iface, |
| g_param_spec_variant ("lower-critical", "lower_critical", "lower_critical", G_VARIANT_TYPE ("v"), NULL, G_PARAM_READWRITE | G_PARAM_STATIC_STRINGS)); |
| /** |
| * SensorThreshold:lower-warning: |
| * |
| * Represents the D-Bus property <link linkend="gdbus-property-org-openbmc-SensorThreshold.lower_warning">"lower_warning"</link>. |
| * |
| * Since the D-Bus property for this #GObject property is both readable and writable, it is meaningful to both read from it and write to it on both the service- and client-side. |
| */ |
| g_object_interface_install_property (iface, |
| g_param_spec_variant ("lower-warning", "lower_warning", "lower_warning", G_VARIANT_TYPE ("v"), NULL, G_PARAM_READWRITE | G_PARAM_STATIC_STRINGS)); |
| /** |
| * SensorThreshold:upper-warning: |
| * |
| * Represents the D-Bus property <link linkend="gdbus-property-org-openbmc-SensorThreshold.upper_warning">"upper_warning"</link>. |
| * |
| * Since the D-Bus property for this #GObject property is both readable and writable, it is meaningful to both read from it and write to it on both the service- and client-side. |
| */ |
| g_object_interface_install_property (iface, |
| g_param_spec_variant ("upper-warning", "upper_warning", "upper_warning", G_VARIANT_TYPE ("v"), NULL, G_PARAM_READWRITE | G_PARAM_STATIC_STRINGS)); |
| /** |
| * SensorThreshold:upper-critical: |
| * |
| * Represents the D-Bus property <link linkend="gdbus-property-org-openbmc-SensorThreshold.upper_critical">"upper_critical"</link>. |
| * |
| * Since the D-Bus property for this #GObject property is both readable and writable, it is meaningful to both read from it and write to it on both the service- and client-side. |
| */ |
| g_object_interface_install_property (iface, |
| g_param_spec_variant ("upper-critical", "upper_critical", "upper_critical", G_VARIANT_TYPE ("v"), NULL, G_PARAM_READWRITE | G_PARAM_STATIC_STRINGS)); |
| /** |
| * SensorThreshold:state: |
| * |
| * Represents the D-Bus property <link linkend="gdbus-property-org-openbmc-SensorThreshold.state">"state"</link>. |
| * |
| * Since the D-Bus property for this #GObject property is readable but not writable, it is meaningful to read from it on both the client- and service-side. It is only meaningful, however, to write to it on the service-side. |
| */ |
| g_object_interface_install_property (iface, |
| g_param_spec_uchar ("state", "state", "state", 0, 255, 0, G_PARAM_READWRITE | G_PARAM_STATIC_STRINGS)); |
| } |
| |
| /** |
| * sensor_threshold_get_lower_critical: (skip) |
| * @object: A #SensorThreshold. |
| * |
| * Gets the value of the <link linkend="gdbus-property-org-openbmc-SensorThreshold.lower_critical">"lower_critical"</link> D-Bus property. |
| * |
| * Since this D-Bus property is both readable and writable, it is meaningful to use this function on both the client- and service-side. |
| * |
| * <warning>The returned value is only valid until the property changes so on the client-side it is only safe to use this function on the thread where @object was constructed. Use sensor_threshold_dup_lower_critical() if on another thread.</warning> |
| * |
| * Returns: (transfer none): The property value or %NULL if the property is not set. Do not free the returned value, it belongs to @object. |
| */ |
| GVariant * |
| sensor_threshold_get_lower_critical (SensorThreshold *object) |
| { |
| return SENSOR_THRESHOLD_GET_IFACE (object)->get_lower_critical (object); |
| } |
| |
| /** |
| * sensor_threshold_dup_lower_critical: (skip) |
| * @object: A #SensorThreshold. |
| * |
| * Gets a copy of the <link linkend="gdbus-property-org-openbmc-SensorThreshold.lower_critical">"lower_critical"</link> D-Bus property. |
| * |
| * Since this D-Bus property is both readable and writable, it is meaningful to use this function on both the client- and service-side. |
| * |
| * Returns: (transfer full): The property value or %NULL if the property is not set. The returned value should be freed with g_variant_unref(). |
| */ |
| GVariant * |
| sensor_threshold_dup_lower_critical (SensorThreshold *object) |
| { |
| GVariant *value; |
| g_object_get (G_OBJECT (object), "lower-critical", &value, NULL); |
| return value; |
| } |
| |
| /** |
| * sensor_threshold_set_lower_critical: (skip) |
| * @object: A #SensorThreshold. |
| * @value: The value to set. |
| * |
| * Sets the <link linkend="gdbus-property-org-openbmc-SensorThreshold.lower_critical">"lower_critical"</link> D-Bus property to @value. |
| * |
| * Since this D-Bus property is both readable and writable, it is meaningful to use this function on both the client- and service-side. |
| */ |
| void |
| sensor_threshold_set_lower_critical (SensorThreshold *object, GVariant *value) |
| { |
| g_object_set (G_OBJECT (object), "lower-critical", value, NULL); |
| } |
| |
| /** |
| * sensor_threshold_get_lower_warning: (skip) |
| * @object: A #SensorThreshold. |
| * |
| * Gets the value of the <link linkend="gdbus-property-org-openbmc-SensorThreshold.lower_warning">"lower_warning"</link> D-Bus property. |
| * |
| * Since this D-Bus property is both readable and writable, it is meaningful to use this function on both the client- and service-side. |
| * |
| * <warning>The returned value is only valid until the property changes so on the client-side it is only safe to use this function on the thread where @object was constructed. Use sensor_threshold_dup_lower_warning() if on another thread.</warning> |
| * |
| * Returns: (transfer none): The property value or %NULL if the property is not set. Do not free the returned value, it belongs to @object. |
| */ |
| GVariant * |
| sensor_threshold_get_lower_warning (SensorThreshold *object) |
| { |
| return SENSOR_THRESHOLD_GET_IFACE (object)->get_lower_warning (object); |
| } |
| |
| /** |
| * sensor_threshold_dup_lower_warning: (skip) |
| * @object: A #SensorThreshold. |
| * |
| * Gets a copy of the <link linkend="gdbus-property-org-openbmc-SensorThreshold.lower_warning">"lower_warning"</link> D-Bus property. |
| * |
| * Since this D-Bus property is both readable and writable, it is meaningful to use this function on both the client- and service-side. |
| * |
| * Returns: (transfer full): The property value or %NULL if the property is not set. The returned value should be freed with g_variant_unref(). |
| */ |
| GVariant * |
| sensor_threshold_dup_lower_warning (SensorThreshold *object) |
| { |
| GVariant *value; |
| g_object_get (G_OBJECT (object), "lower-warning", &value, NULL); |
| return value; |
| } |
| |
| /** |
| * sensor_threshold_set_lower_warning: (skip) |
| * @object: A #SensorThreshold. |
| * @value: The value to set. |
| * |
| * Sets the <link linkend="gdbus-property-org-openbmc-SensorThreshold.lower_warning">"lower_warning"</link> D-Bus property to @value. |
| * |
| * Since this D-Bus property is both readable and writable, it is meaningful to use this function on both the client- and service-side. |
| */ |
| void |
| sensor_threshold_set_lower_warning (SensorThreshold *object, GVariant *value) |
| { |
| g_object_set (G_OBJECT (object), "lower-warning", value, NULL); |
| } |
| |
| /** |
| * sensor_threshold_get_upper_warning: (skip) |
| * @object: A #SensorThreshold. |
| * |
| * Gets the value of the <link linkend="gdbus-property-org-openbmc-SensorThreshold.upper_warning">"upper_warning"</link> D-Bus property. |
| * |
| * Since this D-Bus property is both readable and writable, it is meaningful to use this function on both the client- and service-side. |
| * |
| * <warning>The returned value is only valid until the property changes so on the client-side it is only safe to use this function on the thread where @object was constructed. Use sensor_threshold_dup_upper_warning() if on another thread.</warning> |
| * |
| * Returns: (transfer none): The property value or %NULL if the property is not set. Do not free the returned value, it belongs to @object. |
| */ |
| GVariant * |
| sensor_threshold_get_upper_warning (SensorThreshold *object) |
| { |
| return SENSOR_THRESHOLD_GET_IFACE (object)->get_upper_warning (object); |
| } |
| |
| /** |
| * sensor_threshold_dup_upper_warning: (skip) |
| * @object: A #SensorThreshold. |
| * |
| * Gets a copy of the <link linkend="gdbus-property-org-openbmc-SensorThreshold.upper_warning">"upper_warning"</link> D-Bus property. |
| * |
| * Since this D-Bus property is both readable and writable, it is meaningful to use this function on both the client- and service-side. |
| * |
| * Returns: (transfer full): The property value or %NULL if the property is not set. The returned value should be freed with g_variant_unref(). |
| */ |
| GVariant * |
| sensor_threshold_dup_upper_warning (SensorThreshold *object) |
| { |
| GVariant *value; |
| g_object_get (G_OBJECT (object), "upper-warning", &value, NULL); |
| return value; |
| } |
| |
| /** |
| * sensor_threshold_set_upper_warning: (skip) |
| * @object: A #SensorThreshold. |
| * @value: The value to set. |
| * |
| * Sets the <link linkend="gdbus-property-org-openbmc-SensorThreshold.upper_warning">"upper_warning"</link> D-Bus property to @value. |
| * |
| * Since this D-Bus property is both readable and writable, it is meaningful to use this function on both the client- and service-side. |
| */ |
| void |
| sensor_threshold_set_upper_warning (SensorThreshold *object, GVariant *value) |
| { |
| g_object_set (G_OBJECT (object), "upper-warning", value, NULL); |
| } |
| |
| /** |
| * sensor_threshold_get_upper_critical: (skip) |
| * @object: A #SensorThreshold. |
| * |
| * Gets the value of the <link linkend="gdbus-property-org-openbmc-SensorThreshold.upper_critical">"upper_critical"</link> D-Bus property. |
| * |
| * Since this D-Bus property is both readable and writable, it is meaningful to use this function on both the client- and service-side. |
| * |
| * <warning>The returned value is only valid until the property changes so on the client-side it is only safe to use this function on the thread where @object was constructed. Use sensor_threshold_dup_upper_critical() if on another thread.</warning> |
| * |
| * Returns: (transfer none): The property value or %NULL if the property is not set. Do not free the returned value, it belongs to @object. |
| */ |
| GVariant * |
| sensor_threshold_get_upper_critical (SensorThreshold *object) |
| { |
| return SENSOR_THRESHOLD_GET_IFACE (object)->get_upper_critical (object); |
| } |
| |
| /** |
| * sensor_threshold_dup_upper_critical: (skip) |
| * @object: A #SensorThreshold. |
| * |
| * Gets a copy of the <link linkend="gdbus-property-org-openbmc-SensorThreshold.upper_critical">"upper_critical"</link> D-Bus property. |
| * |
| * Since this D-Bus property is both readable and writable, it is meaningful to use this function on both the client- and service-side. |
| * |
| * Returns: (transfer full): The property value or %NULL if the property is not set. The returned value should be freed with g_variant_unref(). |
| */ |
| GVariant * |
| sensor_threshold_dup_upper_critical (SensorThreshold *object) |
| { |
| GVariant *value; |
| g_object_get (G_OBJECT (object), "upper-critical", &value, NULL); |
| return value; |
| } |
| |
| /** |
| * sensor_threshold_set_upper_critical: (skip) |
| * @object: A #SensorThreshold. |
| * @value: The value to set. |
| * |
| * Sets the <link linkend="gdbus-property-org-openbmc-SensorThreshold.upper_critical">"upper_critical"</link> D-Bus property to @value. |
| * |
| * Since this D-Bus property is both readable and writable, it is meaningful to use this function on both the client- and service-side. |
| */ |
| void |
| sensor_threshold_set_upper_critical (SensorThreshold *object, GVariant *value) |
| { |
| g_object_set (G_OBJECT (object), "upper-critical", value, NULL); |
| } |
| |
| /** |
| * sensor_threshold_get_state: (skip) |
| * @object: A #SensorThreshold. |
| * |
| * Gets the value of the <link linkend="gdbus-property-org-openbmc-SensorThreshold.state">"state"</link> D-Bus property. |
| * |
| * Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side. |
| * |
| * Returns: The property value. |
| */ |
| guchar |
| sensor_threshold_get_state (SensorThreshold *object) |
| { |
| return SENSOR_THRESHOLD_GET_IFACE (object)->get_state (object); |
| } |
| |
| /** |
| * sensor_threshold_set_state: (skip) |
| * @object: A #SensorThreshold. |
| * @value: The value to set. |
| * |
| * Sets the <link linkend="gdbus-property-org-openbmc-SensorThreshold.state">"state"</link> D-Bus property to @value. |
| * |
| * Since this D-Bus property is not writable, it is only meaningful to use this function on the service-side. |
| */ |
| void |
| sensor_threshold_set_state (SensorThreshold *object, guchar value) |
| { |
| g_object_set (G_OBJECT (object), "state", value, NULL); |
| } |
| |
| /** |
| * sensor_threshold_emit_warning: |
| * @object: A #SensorThreshold. |
| * |
| * Emits the <link linkend="gdbus-signal-org-openbmc-SensorThreshold.Warning">"Warning"</link> D-Bus signal. |
| */ |
| void |
| sensor_threshold_emit_warning ( |
| SensorThreshold *object) |
| { |
| g_signal_emit_by_name (object, "warning"); |
| } |
| |
| /** |
| * sensor_threshold_emit_critical: |
| * @object: A #SensorThreshold. |
| * |
| * Emits the <link linkend="gdbus-signal-org-openbmc-SensorThreshold.Critical">"Critical"</link> D-Bus signal. |
| */ |
| void |
| sensor_threshold_emit_critical ( |
| SensorThreshold *object) |
| { |
| g_signal_emit_by_name (object, "critical"); |
| } |
| |
| /** |
| * sensor_threshold_emit_normal: |
| * @object: A #SensorThreshold. |
| * |
| * Emits the <link linkend="gdbus-signal-org-openbmc-SensorThreshold.Normal">"Normal"</link> D-Bus signal. |
| */ |
| void |
| sensor_threshold_emit_normal ( |
| SensorThreshold *object) |
| { |
| g_signal_emit_by_name (object, "normal"); |
| } |
| |
| /** |
| * sensor_threshold_call_get_state: |
| * @proxy: A #SensorThresholdProxy. |
| * @cancellable: (allow-none): A #GCancellable or %NULL. |
| * @callback: A #GAsyncReadyCallback to call when the request is satisfied or %NULL. |
| * @user_data: User data to pass to @callback. |
| * |
| * Asynchronously invokes the <link linkend="gdbus-method-org-openbmc-SensorThreshold.getState">getState()</link> D-Bus method on @proxy. |
| * When the operation is finished, @callback will be invoked in the <link linkend="g-main-context-push-thread-default">thread-default main loop</link> of the thread you are calling this method from. |
| * You can then call sensor_threshold_call_get_state_finish() to get the result of the operation. |
| * |
| * See sensor_threshold_call_get_state_sync() for the synchronous, blocking version of this method. |
| */ |
| void |
| sensor_threshold_call_get_state ( |
| SensorThreshold *proxy, |
| GCancellable *cancellable, |
| GAsyncReadyCallback callback, |
| gpointer user_data) |
| { |
| g_dbus_proxy_call (G_DBUS_PROXY (proxy), |
| "getState", |
| g_variant_new ("()"), |
| G_DBUS_CALL_FLAGS_NONE, |
| -1, |
| cancellable, |
| callback, |
| user_data); |
| } |
| |
| /** |
| * sensor_threshold_call_get_state_finish: |
| * @proxy: A #SensorThresholdProxy. |
| * @out_state: (out): Return location for return parameter or %NULL to ignore. |
| * @res: The #GAsyncResult obtained from the #GAsyncReadyCallback passed to sensor_threshold_call_get_state(). |
| * @error: Return location for error or %NULL. |
| * |
| * Finishes an operation started with sensor_threshold_call_get_state(). |
| * |
| * Returns: (skip): %TRUE if the call succeded, %FALSE if @error is set. |
| */ |
| gboolean |
| sensor_threshold_call_get_state_finish ( |
| SensorThreshold *proxy, |
| guchar *out_state, |
| GAsyncResult *res, |
| GError **error) |
| { |
| GVariant *_ret; |
| _ret = g_dbus_proxy_call_finish (G_DBUS_PROXY (proxy), res, error); |
| if (_ret == NULL) |
| goto _out; |
| g_variant_get (_ret, |
| "(y)", |
| out_state); |
| g_variant_unref (_ret); |
| _out: |
| return _ret != NULL; |
| } |
| |
| /** |
| * sensor_threshold_call_get_state_sync: |
| * @proxy: A #SensorThresholdProxy. |
| * @out_state: (out): Return location for return parameter or %NULL to ignore. |
| * @cancellable: (allow-none): A #GCancellable or %NULL. |
| * @error: Return location for error or %NULL. |
| * |
| * Synchronously invokes the <link linkend="gdbus-method-org-openbmc-SensorThreshold.getState">getState()</link> D-Bus method on @proxy. The calling thread is blocked until a reply is received. |
| * |
| * See sensor_threshold_call_get_state() for the asynchronous version of this method. |
| * |
| * Returns: (skip): %TRUE if the call succeded, %FALSE if @error is set. |
| */ |
| gboolean |
| sensor_threshold_call_get_state_sync ( |
| SensorThreshold *proxy, |
| guchar *out_state, |
| GCancellable *cancellable, |
| GError **error) |
| { |
| GVariant *_ret; |
| _ret = g_dbus_proxy_call_sync (G_DBUS_PROXY (proxy), |
| "getState", |
| g_variant_new ("()"), |
| G_DBUS_CALL_FLAGS_NONE, |
| -1, |
| cancellable, |
| error); |
| if (_ret == NULL) |
| goto _out; |
| g_variant_get (_ret, |
| "(y)", |
| out_state); |
| g_variant_unref (_ret); |
| _out: |
| return _ret != NULL; |
| } |
| |
| /** |
| * sensor_threshold_complete_get_state: |
| * @object: A #SensorThreshold. |
| * @invocation: (transfer full): A #GDBusMethodInvocation. |
| * @state: Parameter to return. |
| * |
| * Helper function used in service implementations to finish handling invocations of the <link linkend="gdbus-method-org-openbmc-SensorThreshold.getState">getState()</link> D-Bus method. If you instead want to finish handling an invocation by returning an error, use g_dbus_method_invocation_return_error() or similar. |
| * |
| * This method will free @invocation, you cannot use it afterwards. |
| */ |
| void |
| sensor_threshold_complete_get_state ( |
| SensorThreshold *object, |
| GDBusMethodInvocation *invocation, |
| guchar state) |
| { |
| g_dbus_method_invocation_return_value (invocation, |
| g_variant_new ("(y)", |
| state)); |
| } |
| |
| /* ------------------------------------------------------------------------ */ |
| |
| /** |
| * SensorThresholdProxy: |
| * |
| * The #SensorThresholdProxy structure contains only private data and should only be accessed using the provided API. |
| */ |
| |
| /** |
| * SensorThresholdProxyClass: |
| * @parent_class: The parent class. |
| * |
| * Class structure for #SensorThresholdProxy. |
| */ |
| |
| struct _SensorThresholdProxyPrivate |
| { |
| GData *qdata; |
| }; |
| |
| static void sensor_threshold_proxy_iface_init (SensorThresholdIface *iface); |
| |
| #if GLIB_VERSION_MAX_ALLOWED >= GLIB_VERSION_2_38 |
| G_DEFINE_TYPE_WITH_CODE (SensorThresholdProxy, sensor_threshold_proxy, G_TYPE_DBUS_PROXY, |
| G_ADD_PRIVATE (SensorThresholdProxy) |
| G_IMPLEMENT_INTERFACE (TYPE_SENSOR_THRESHOLD, sensor_threshold_proxy_iface_init)); |
| |
| #else |
| G_DEFINE_TYPE_WITH_CODE (SensorThresholdProxy, sensor_threshold_proxy, G_TYPE_DBUS_PROXY, |
| G_IMPLEMENT_INTERFACE (TYPE_SENSOR_THRESHOLD, sensor_threshold_proxy_iface_init)); |
| |
| #endif |
| static void |
| sensor_threshold_proxy_finalize (GObject *object) |
| { |
| SensorThresholdProxy *proxy = SENSOR_THRESHOLD_PROXY (object); |
| g_datalist_clear (&proxy->priv->qdata); |
| G_OBJECT_CLASS (sensor_threshold_proxy_parent_class)->finalize (object); |
| } |
| |
| static void |
| sensor_threshold_proxy_get_property (GObject *object, |
| guint prop_id, |
| GValue *value, |
| GParamSpec *pspec G_GNUC_UNUSED) |
| { |
| const _ExtendedGDBusPropertyInfo *info; |
| GVariant *variant; |
| g_assert (prop_id != 0 && prop_id - 1 < 5); |
| info = _sensor_threshold_property_info_pointers[prop_id - 1]; |
| variant = g_dbus_proxy_get_cached_property (G_DBUS_PROXY (object), info->parent_struct.name); |
| if (info->use_gvariant) |
| { |
| g_value_set_variant (value, variant); |
| } |
| else |
| { |
| if (variant != NULL) |
| g_dbus_gvariant_to_gvalue (variant, value); |
| } |
| if (variant != NULL) |
| g_variant_unref (variant); |
| } |
| |
| static void |
| sensor_threshold_proxy_set_property_cb (GDBusProxy *proxy, |
| GAsyncResult *res, |
| gpointer user_data) |
| { |
| const _ExtendedGDBusPropertyInfo *info = user_data; |
| GError *error; |
| GVariant *_ret; |
| error = NULL; |
| _ret = g_dbus_proxy_call_finish (proxy, res, &error); |
| if (!_ret) |
| { |
| g_warning ("Error setting property '%s' on interface org.openbmc.SensorThreshold: %s (%s, %d)", |
| info->parent_struct.name, |
| error->message, g_quark_to_string (error->domain), error->code); |
| g_error_free (error); |
| } |
| else |
| { |
| g_variant_unref (_ret); |
| } |
| } |
| |
| static void |
| sensor_threshold_proxy_set_property (GObject *object, |
| guint prop_id, |
| const GValue *value, |
| GParamSpec *pspec G_GNUC_UNUSED) |
| { |
| const _ExtendedGDBusPropertyInfo *info; |
| GVariant *variant; |
| g_assert (prop_id != 0 && prop_id - 1 < 5); |
| info = _sensor_threshold_property_info_pointers[prop_id - 1]; |
| variant = g_dbus_gvalue_to_gvariant (value, G_VARIANT_TYPE (info->parent_struct.signature)); |
| g_dbus_proxy_call (G_DBUS_PROXY (object), |
| "org.freedesktop.DBus.Properties.Set", |
| g_variant_new ("(ssv)", "org.openbmc.SensorThreshold", info->parent_struct.name, variant), |
| G_DBUS_CALL_FLAGS_NONE, |
| -1, |
| NULL, (GAsyncReadyCallback) sensor_threshold_proxy_set_property_cb, (GDBusPropertyInfo *) &info->parent_struct); |
| g_variant_unref (variant); |
| } |
| |
| static void |
| sensor_threshold_proxy_g_signal (GDBusProxy *proxy, |
| const gchar *sender_name G_GNUC_UNUSED, |
| const gchar *signal_name, |
| GVariant *parameters) |
| { |
| _ExtendedGDBusSignalInfo *info; |
| GVariantIter iter; |
| GVariant *child; |
| GValue *paramv; |
| guint num_params; |
| guint n; |
| guint signal_id; |
| info = (_ExtendedGDBusSignalInfo *) g_dbus_interface_info_lookup_signal ((GDBusInterfaceInfo *) &_sensor_threshold_interface_info.parent_struct, signal_name); |
| if (info == NULL) |
| return; |
| num_params = g_variant_n_children (parameters); |
| paramv = g_new0 (GValue, num_params + 1); |
| g_value_init (¶mv[0], TYPE_SENSOR_THRESHOLD); |
| g_value_set_object (¶mv[0], proxy); |
| g_variant_iter_init (&iter, parameters); |
| n = 1; |
| while ((child = g_variant_iter_next_value (&iter)) != NULL) |
| { |
| _ExtendedGDBusArgInfo *arg_info = (_ExtendedGDBusArgInfo *) info->parent_struct.args[n - 1]; |
| if (arg_info->use_gvariant) |
| { |
| g_value_init (¶mv[n], G_TYPE_VARIANT); |
| g_value_set_variant (¶mv[n], child); |
| n++; |
| } |
| else |
| g_dbus_gvariant_to_gvalue (child, ¶mv[n++]); |
| g_variant_unref (child); |
| } |
| signal_id = g_signal_lookup (info->signal_name, TYPE_SENSOR_THRESHOLD); |
| g_signal_emitv (paramv, signal_id, 0, NULL); |
| for (n = 0; n < num_params + 1; n++) |
| g_value_unset (¶mv[n]); |
| g_free (paramv); |
| } |
| |
| static void |
| sensor_threshold_proxy_g_properties_changed (GDBusProxy *_proxy, |
| GVariant *changed_properties, |
| const gchar *const *invalidated_properties) |
| { |
| SensorThresholdProxy *proxy = SENSOR_THRESHOLD_PROXY (_proxy); |
| guint n; |
| const gchar *key; |
| GVariantIter *iter; |
| _ExtendedGDBusPropertyInfo *info; |
| g_variant_get (changed_properties, "a{sv}", &iter); |
| while (g_variant_iter_next (iter, "{&sv}", &key, NULL)) |
| { |
| info = (_ExtendedGDBusPropertyInfo *) g_dbus_interface_info_lookup_property ((GDBusInterfaceInfo *) &_sensor_threshold_interface_info.parent_struct, key); |
| g_datalist_remove_data (&proxy->priv->qdata, key); |
| if (info != NULL) |
| g_object_notify (G_OBJECT (proxy), info->hyphen_name); |
| } |
| g_variant_iter_free (iter); |
| for (n = 0; invalidated_properties[n] != NULL; n++) |
| { |
| info = (_ExtendedGDBusPropertyInfo *) g_dbus_interface_info_lookup_property ((GDBusInterfaceInfo *) &_sensor_threshold_interface_info.parent_struct, invalidated_properties[n]); |
| g_datalist_remove_data (&proxy->priv->qdata, invalidated_properties[n]); |
| if (info != NULL) |
| g_object_notify (G_OBJECT (proxy), info->hyphen_name); |
| } |
| } |
| |
| static GVariant * |
| sensor_threshold_proxy_get_lower_critical (SensorThreshold *object) |
| { |
| SensorThresholdProxy *proxy = SENSOR_THRESHOLD_PROXY (object); |
| GVariant *variant; |
| GVariant *value = NULL; |
| variant = g_dbus_proxy_get_cached_property (G_DBUS_PROXY (proxy), "lower_critical"); |
| value = variant; |
| if (variant != NULL) |
| g_variant_unref (variant); |
| return value; |
| } |
| |
| static GVariant * |
| sensor_threshold_proxy_get_lower_warning (SensorThreshold *object) |
| { |
| SensorThresholdProxy *proxy = SENSOR_THRESHOLD_PROXY (object); |
| GVariant *variant; |
| GVariant *value = NULL; |
| variant = g_dbus_proxy_get_cached_property (G_DBUS_PROXY (proxy), "lower_warning"); |
| value = variant; |
| if (variant != NULL) |
| g_variant_unref (variant); |
| return value; |
| } |
| |
| static GVariant * |
| sensor_threshold_proxy_get_upper_warning (SensorThreshold *object) |
| { |
| SensorThresholdProxy *proxy = SENSOR_THRESHOLD_PROXY (object); |
| GVariant *variant; |
| GVariant *value = NULL; |
| variant = g_dbus_proxy_get_cached_property (G_DBUS_PROXY (proxy), "upper_warning"); |
| value = variant; |
| if (variant != NULL) |
| g_variant_unref (variant); |
| return value; |
| } |
| |
| static GVariant * |
| sensor_threshold_proxy_get_upper_critical (SensorThreshold *object) |
| { |
| SensorThresholdProxy *proxy = SENSOR_THRESHOLD_PROXY (object); |
| GVariant *variant; |
| GVariant *value = NULL; |
| variant = g_dbus_proxy_get_cached_property (G_DBUS_PROXY (proxy), "upper_critical"); |
| value = variant; |
| if (variant != NULL) |
| g_variant_unref (variant); |
| return value; |
| } |
| |
| static guchar |
| sensor_threshold_proxy_get_state (SensorThreshold *object) |
| { |
| SensorThresholdProxy *proxy = SENSOR_THRESHOLD_PROXY (object); |
| GVariant *variant; |
| guchar value = 0; |
| variant = g_dbus_proxy_get_cached_property (G_DBUS_PROXY (proxy), "state"); |
| if (variant != NULL) |
| { |
| value = g_variant_get_byte (variant); |
| g_variant_unref (variant); |
| } |
| return value; |
| } |
| |
| static void |
| sensor_threshold_proxy_init (SensorThresholdProxy *proxy) |
| { |
| #if GLIB_VERSION_MAX_ALLOWED >= GLIB_VERSION_2_38 |
| proxy->priv = sensor_threshold_proxy_get_instance_private (proxy); |
| #else |
| proxy->priv = G_TYPE_INSTANCE_GET_PRIVATE (proxy, TYPE_SENSOR_THRESHOLD_PROXY, SensorThresholdProxyPrivate); |
| #endif |
| |
| g_dbus_proxy_set_interface_info (G_DBUS_PROXY (proxy), sensor_threshold_interface_info ()); |
| } |
| |
| static void |
| sensor_threshold_proxy_class_init (SensorThresholdProxyClass *klass) |
| { |
| GObjectClass *gobject_class; |
| GDBusProxyClass *proxy_class; |
| |
| gobject_class = G_OBJECT_CLASS (klass); |
| gobject_class->finalize = sensor_threshold_proxy_finalize; |
| gobject_class->get_property = sensor_threshold_proxy_get_property; |
| gobject_class->set_property = sensor_threshold_proxy_set_property; |
| |
| proxy_class = G_DBUS_PROXY_CLASS (klass); |
| proxy_class->g_signal = sensor_threshold_proxy_g_signal; |
| proxy_class->g_properties_changed = sensor_threshold_proxy_g_properties_changed; |
| |
| sensor_threshold_override_properties (gobject_class, 1); |
| |
| #if GLIB_VERSION_MAX_ALLOWED < GLIB_VERSION_2_38 |
| g_type_class_add_private (klass, sizeof (SensorThresholdProxyPrivate)); |
| #endif |
| } |
| |
| static void |
| sensor_threshold_proxy_iface_init (SensorThresholdIface *iface) |
| { |
| iface->get_lower_critical = sensor_threshold_proxy_get_lower_critical; |
| iface->get_lower_warning = sensor_threshold_proxy_get_lower_warning; |
| iface->get_upper_warning = sensor_threshold_proxy_get_upper_warning; |
| iface->get_upper_critical = sensor_threshold_proxy_get_upper_critical; |
| iface->get_state = sensor_threshold_proxy_get_state; |
| } |
| |
| /** |
| * sensor_threshold_proxy_new: |
| * @connection: A #GDBusConnection. |
| * @flags: Flags from the #GDBusProxyFlags enumeration. |
| * @name: (allow-none): A bus name (well-known or unique) or %NULL if @connection is not a message bus connection. |
| * @object_path: An object path. |
| * @cancellable: (allow-none): A #GCancellable or %NULL. |
| * @callback: A #GAsyncReadyCallback to call when the request is satisfied. |
| * @user_data: User data to pass to @callback. |
| * |
| * Asynchronously creates a proxy for the D-Bus interface <link linkend="gdbus-interface-org-openbmc-SensorThreshold.top_of_page">org.openbmc.SensorThreshold</link>. See g_dbus_proxy_new() for more details. |
| * |
| * When the operation is finished, @callback will be invoked in the <link linkend="g-main-context-push-thread-default">thread-default main loop</link> of the thread you are calling this method from. |
| * You can then call sensor_threshold_proxy_new_finish() to get the result of the operation. |
| * |
| * See sensor_threshold_proxy_new_sync() for the synchronous, blocking version of this constructor. |
| */ |
| void |
| sensor_threshold_proxy_new ( |
| GDBusConnection *connection, |
| GDBusProxyFlags flags, |
| const gchar *name, |
| const gchar *object_path, |
| GCancellable *cancellable, |
| GAsyncReadyCallback callback, |
| gpointer user_data) |
| { |
| g_async_initable_new_async (TYPE_SENSOR_THRESHOLD_PROXY, G_PRIORITY_DEFAULT, cancellable, callback, user_data, "g-flags", flags, "g-name", name, "g-connection", connection, "g-object-path", object_path, "g-interface-name", "org.openbmc.SensorThreshold", NULL); |
| } |
| |
| /** |
| * sensor_threshold_proxy_new_finish: |
| * @res: The #GAsyncResult obtained from the #GAsyncReadyCallback passed to sensor_threshold_proxy_new(). |
| * @error: Return location for error or %NULL |
| * |
| * Finishes an operation started with sensor_threshold_proxy_new(). |
| * |
| * Returns: (transfer full) (type SensorThresholdProxy): The constructed proxy object or %NULL if @error is set. |
| */ |
| SensorThreshold * |
| sensor_threshold_proxy_new_finish ( |
| GAsyncResult *res, |
| GError **error) |
| { |
| GObject *ret; |
| GObject *source_object; |
| source_object = g_async_result_get_source_object (res); |
| ret = g_async_initable_new_finish (G_ASYNC_INITABLE (source_object), res, error); |
| g_object_unref (source_object); |
| if (ret != NULL) |
| return SENSOR_THRESHOLD (ret); |
| else |
| return NULL; |
| } |
| |
| /** |
| * sensor_threshold_proxy_new_sync: |
| * @connection: A #GDBusConnection. |
| * @flags: Flags from the #GDBusProxyFlags enumeration. |
| * @name: (allow-none): A bus name (well-known or unique) or %NULL if @connection is not a message bus connection. |
| * @object_path: An object path. |
| * @cancellable: (allow-none): A #GCancellable or %NULL. |
| * @error: Return location for error or %NULL |
| * |
| * Synchronously creates a proxy for the D-Bus interface <link linkend="gdbus-interface-org-openbmc-SensorThreshold.top_of_page">org.openbmc.SensorThreshold</link>. See g_dbus_proxy_new_sync() for more details. |
| * |
| * The calling thread is blocked until a reply is received. |
| * |
| * See sensor_threshold_proxy_new() for the asynchronous version of this constructor. |
| * |
| * Returns: (transfer full) (type SensorThresholdProxy): The constructed proxy object or %NULL if @error is set. |
| */ |
| SensorThreshold * |
| sensor_threshold_proxy_new_sync ( |
| GDBusConnection *connection, |
| GDBusProxyFlags flags, |
| const gchar *name, |
| const gchar *object_path, |
| GCancellable *cancellable, |
| GError **error) |
| { |
| GInitable *ret; |
| ret = g_initable_new (TYPE_SENSOR_THRESHOLD_PROXY, cancellable, error, "g-flags", flags, "g-name", name, "g-connection", connection, "g-object-path", object_path, "g-interface-name", "org.openbmc.SensorThreshold", NULL); |
| if (ret != NULL) |
| return SENSOR_THRESHOLD (ret); |
| else |
| return NULL; |
| } |
| |
| |
| /** |
| * sensor_threshold_proxy_new_for_bus: |
| * @bus_type: A #GBusType. |
| * @flags: Flags from the #GDBusProxyFlags enumeration. |
| * @name: A bus name (well-known or unique). |
| * @object_path: An object path. |
| * @cancellable: (allow-none): A #GCancellable or %NULL. |
| * @callback: A #GAsyncReadyCallback to call when the request is satisfied. |
| * @user_data: User data to pass to @callback. |
| * |
| * Like sensor_threshold_proxy_new() but takes a #GBusType instead of a #GDBusConnection. |
| * |
| * When the operation is finished, @callback will be invoked in the <link linkend="g-main-context-push-thread-default">thread-default main loop</link> of the thread you are calling this method from. |
| * You can then call sensor_threshold_proxy_new_for_bus_finish() to get the result of the operation. |
| * |
| * See sensor_threshold_proxy_new_for_bus_sync() for the synchronous, blocking version of this constructor. |
| */ |
| void |
| sensor_threshold_proxy_new_for_bus ( |
| GBusType bus_type, |
| GDBusProxyFlags flags, |
| const gchar *name, |
| const gchar *object_path, |
| GCancellable *cancellable, |
| GAsyncReadyCallback callback, |
| gpointer user_data) |
| { |
| g_async_initable_new_async (TYPE_SENSOR_THRESHOLD_PROXY, G_PRIORITY_DEFAULT, cancellable, callback, user_data, "g-flags", flags, "g-name", name, "g-bus-type", bus_type, "g-object-path", object_path, "g-interface-name", "org.openbmc.SensorThreshold", NULL); |
| } |
| |
| /** |
| * sensor_threshold_proxy_new_for_bus_finish: |
| * @res: The #GAsyncResult obtained from the #GAsyncReadyCallback passed to sensor_threshold_proxy_new_for_bus(). |
| * @error: Return location for error or %NULL |
| * |
| * Finishes an operation started with sensor_threshold_proxy_new_for_bus(). |
| * |
| * Returns: (transfer full) (type SensorThresholdProxy): The constructed proxy object or %NULL if @error is set. |
| */ |
| SensorThreshold * |
| sensor_threshold_proxy_new_for_bus_finish ( |
| GAsyncResult *res, |
| GError **error) |
| { |
| GObject *ret; |
| GObject *source_object; |
| source_object = g_async_result_get_source_object (res); |
| ret = g_async_initable_new_finish (G_ASYNC_INITABLE (source_object), res, error); |
| g_object_unref (source_object); |
| if (ret != NULL) |
| return SENSOR_THRESHOLD (ret); |
| else |
| return NULL; |
| } |
| |
| /** |
| * sensor_threshold_proxy_new_for_bus_sync: |
| * @bus_type: A #GBusType. |
| * @flags: Flags from the #GDBusProxyFlags enumeration. |
| * @name: A bus name (well-known or unique). |
| * @object_path: An object path. |
| * @cancellable: (allow-none): A #GCancellable or %NULL. |
| * @error: Return location for error or %NULL |
| * |
| * Like sensor_threshold_proxy_new_sync() but takes a #GBusType instead of a #GDBusConnection. |
| * |
| * The calling thread is blocked until a reply is received. |
| * |
| * See sensor_threshold_proxy_new_for_bus() for the asynchronous version of this constructor. |
| * |
| * Returns: (transfer full) (type SensorThresholdProxy): The constructed proxy object or %NULL if @error is set. |
| */ |
| SensorThreshold * |
| sensor_threshold_proxy_new_for_bus_sync ( |
| GBusType bus_type, |
| GDBusProxyFlags flags, |
| const gchar *name, |
| const gchar *object_path, |
| GCancellable *cancellable, |
| GError **error) |
| { |
| GInitable *ret; |
| ret = g_initable_new (TYPE_SENSOR_THRESHOLD_PROXY, cancellable, error, "g-flags", flags, "g-name", name, "g-bus-type", bus_type, "g-object-path", object_path, "g-interface-name", "org.openbmc.SensorThreshold", NULL); |
| if (ret != NULL) |
| return SENSOR_THRESHOLD (ret); |
| else |
| return NULL; |
| } |
| |
| |
| /* ------------------------------------------------------------------------ */ |
| |
| /** |
| * SensorThresholdSkeleton: |
| * |
| * The #SensorThresholdSkeleton structure contains only private data and should only be accessed using the provided API. |
| */ |
| |
| /** |
| * SensorThresholdSkeletonClass: |
| * @parent_class: The parent class. |
| * |
| * Class structure for #SensorThresholdSkeleton. |
| */ |
| |
| struct _SensorThresholdSkeletonPrivate |
| { |
| GValue *properties; |
| GList *changed_properties; |
| GSource *changed_properties_idle_source; |
| GMainContext *context; |
| GMutex lock; |
| }; |
| |
| static void |
| _sensor_threshold_skeleton_handle_method_call ( |
| GDBusConnection *connection G_GNUC_UNUSED, |
| const gchar *sender G_GNUC_UNUSED, |
| const gchar *object_path G_GNUC_UNUSED, |
| const gchar *interface_name, |
| const gchar *method_name, |
| GVariant *parameters, |
| GDBusMethodInvocation *invocation, |
| gpointer user_data) |
| { |
| SensorThresholdSkeleton *skeleton = SENSOR_THRESHOLD_SKELETON (user_data); |
| _ExtendedGDBusMethodInfo *info; |
| GVariantIter iter; |
| GVariant *child; |
| GValue *paramv; |
| guint num_params; |
| guint num_extra; |
| guint n; |
| guint signal_id; |
| GValue return_value = G_VALUE_INIT; |
| info = (_ExtendedGDBusMethodInfo *) g_dbus_method_invocation_get_method_info (invocation); |
| g_assert (info != NULL); |
| num_params = g_variant_n_children (parameters); |
| num_extra = info->pass_fdlist ? 3 : 2; paramv = g_new0 (GValue, num_params + num_extra); |
| n = 0; |
| g_value_init (¶mv[n], TYPE_SENSOR_THRESHOLD); |
| g_value_set_object (¶mv[n++], skeleton); |
| g_value_init (¶mv[n], G_TYPE_DBUS_METHOD_INVOCATION); |
| g_value_set_object (¶mv[n++], invocation); |
| if (info->pass_fdlist) |
| { |
| #ifdef G_OS_UNIX |
| g_value_init (¶mv[n], G_TYPE_UNIX_FD_LIST); |
| g_value_set_object (¶mv[n++], g_dbus_message_get_unix_fd_list (g_dbus_method_invocation_get_message (invocation))); |
| #else |
| g_assert_not_reached (); |
| #endif |
| } |
| g_variant_iter_init (&iter, parameters); |
| while ((child = g_variant_iter_next_value (&iter)) != NULL) |
| { |
| _ExtendedGDBusArgInfo *arg_info = (_ExtendedGDBusArgInfo *) info->parent_struct.in_args[n - num_extra]; |
| if (arg_info->use_gvariant) |
| { |
| g_value_init (¶mv[n], G_TYPE_VARIANT); |
| g_value_set_variant (¶mv[n], child); |
| n++; |
| } |
| else |
| g_dbus_gvariant_to_gvalue (child, ¶mv[n++]); |
| g_variant_unref (child); |
| } |
| signal_id = g_signal_lookup (info->signal_name, TYPE_SENSOR_THRESHOLD); |
| g_value_init (&return_value, G_TYPE_BOOLEAN); |
| g_signal_emitv (paramv, signal_id, 0, &return_value); |
| if (!g_value_get_boolean (&return_value)) |
| g_dbus_method_invocation_return_error (invocation, G_DBUS_ERROR, G_DBUS_ERROR_UNKNOWN_METHOD, "Method %s is not implemented on interface %s", method_name, interface_name); |
| g_value_unset (&return_value); |
| for (n = 0; n < num_params + num_extra; n++) |
| g_value_unset (¶mv[n]); |
| g_free (paramv); |
| } |
| |
| static GVariant * |
| _sensor_threshold_skeleton_handle_get_property ( |
| GDBusConnection *connection G_GNUC_UNUSED, |
| const gchar *sender G_GNUC_UNUSED, |
| const gchar *object_path G_GNUC_UNUSED, |
| const gchar *interface_name G_GNUC_UNUSED, |
| const gchar *property_name, |
| GError **error, |
| gpointer user_data) |
| { |
| SensorThresholdSkeleton *skeleton = SENSOR_THRESHOLD_SKELETON (user_data); |
| GValue value = G_VALUE_INIT; |
| GParamSpec *pspec; |
| _ExtendedGDBusPropertyInfo *info; |
| GVariant *ret; |
| ret = NULL; |
| info = (_ExtendedGDBusPropertyInfo *) g_dbus_interface_info_lookup_property ((GDBusInterfaceInfo *) &_sensor_threshold_interface_info.parent_struct, property_name); |
| g_assert (info != NULL); |
| pspec = g_object_class_find_property (G_OBJECT_GET_CLASS (skeleton), info->hyphen_name); |
| if (pspec == NULL) |
| { |
| g_set_error (error, G_DBUS_ERROR, G_DBUS_ERROR_INVALID_ARGS, "No property with name %s", property_name); |
| } |
| else |
| { |
| g_value_init (&value, pspec->value_type); |
| g_object_get_property (G_OBJECT (skeleton), info->hyphen_name, &value); |
| ret = g_dbus_gvalue_to_gvariant (&value, G_VARIANT_TYPE (info->parent_struct.signature)); |
| g_value_unset (&value); |
| } |
| return ret; |
| } |
| |
| static gboolean |
| _sensor_threshold_skeleton_handle_set_property ( |
| GDBusConnection *connection G_GNUC_UNUSED, |
| const gchar *sender G_GNUC_UNUSED, |
| const gchar *object_path G_GNUC_UNUSED, |
| const gchar *interface_name G_GNUC_UNUSED, |
| const gchar *property_name, |
| GVariant *variant, |
| GError **error, |
| gpointer user_data) |
| { |
| SensorThresholdSkeleton *skeleton = SENSOR_THRESHOLD_SKELETON (user_data); |
| GValue value = G_VALUE_INIT; |
| GParamSpec *pspec; |
| _ExtendedGDBusPropertyInfo *info; |
| gboolean ret; |
| ret = FALSE; |
| info = (_ExtendedGDBusPropertyInfo *) g_dbus_interface_info_lookup_property ((GDBusInterfaceInfo *) &_sensor_threshold_interface_info.parent_struct, property_name); |
| g_assert (info != NULL); |
| pspec = g_object_class_find_property (G_OBJECT_GET_CLASS (skeleton), info->hyphen_name); |
| if (pspec == NULL) |
| { |
| g_set_error (error, G_DBUS_ERROR, G_DBUS_ERROR_INVALID_ARGS, "No property with name %s", property_name); |
| } |
| else |
| { |
| if (info->use_gvariant) |
| g_value_set_variant (&value, variant); |
| else |
| g_dbus_gvariant_to_gvalue (variant, &value); |
| g_object_set_property (G_OBJECT (skeleton), info->hyphen_name, &value); |
| g_value_unset (&value); |
| ret = TRUE; |
| } |
| return ret; |
| } |
| |
| static const GDBusInterfaceVTable _sensor_threshold_skeleton_vtable = |
| { |
| _sensor_threshold_skeleton_handle_method_call, |
| _sensor_threshold_skeleton_handle_get_property, |
| _sensor_threshold_skeleton_handle_set_property, |
| {NULL} |
| }; |
| |
| static GDBusInterfaceInfo * |
| sensor_threshold_skeleton_dbus_interface_get_info (GDBusInterfaceSkeleton *skeleton G_GNUC_UNUSED) |
| { |
| return sensor_threshold_interface_info (); |
| } |
| |
| static GDBusInterfaceVTable * |
| sensor_threshold_skeleton_dbus_interface_get_vtable (GDBusInterfaceSkeleton *skeleton G_GNUC_UNUSED) |
| { |
| return (GDBusInterfaceVTable *) &_sensor_threshold_skeleton_vtable; |
| } |
| |
| static GVariant * |
| sensor_threshold_skeleton_dbus_interface_get_properties (GDBusInterfaceSkeleton *_skeleton) |
| { |
| SensorThresholdSkeleton *skeleton = SENSOR_THRESHOLD_SKELETON (_skeleton); |
| |
| GVariantBuilder builder; |
| guint n; |
| g_variant_builder_init (&builder, G_VARIANT_TYPE ("a{sv}")); |
| if (_sensor_threshold_interface_info.parent_struct.properties == NULL) |
| goto out; |
| for (n = 0; _sensor_threshold_interface_info.parent_struct.properties[n] != NULL; n++) |
| { |
| GDBusPropertyInfo *info = _sensor_threshold_interface_info.parent_struct.properties[n]; |
| if (info->flags & G_DBUS_PROPERTY_INFO_FLAGS_READABLE) |
| { |
| GVariant *value; |
| value = _sensor_threshold_skeleton_handle_get_property (g_dbus_interface_skeleton_get_connection (G_DBUS_INTERFACE_SKELETON (skeleton)), NULL, g_dbus_interface_skeleton_get_object_path (G_DBUS_INTERFACE_SKELETON (skeleton)), "org.openbmc.SensorThreshold", info->name, NULL, skeleton); |
| if (value != NULL) |
| { |
| g_variant_take_ref (value); |
| g_variant_builder_add (&builder, "{sv}", info->name, value); |
| g_variant_unref (value); |
| } |
| } |
| } |
| out: |
| return g_variant_builder_end (&builder); |
| } |
| |
| static gboolean _sensor_threshold_emit_changed (gpointer user_data); |
| |
| static void |
| sensor_threshold_skeleton_dbus_interface_flush (GDBusInterfaceSkeleton *_skeleton) |
| { |
| SensorThresholdSkeleton *skeleton = SENSOR_THRESHOLD_SKELETON (_skeleton); |
| gboolean emit_changed = FALSE; |
| |
| g_mutex_lock (&skeleton->priv->lock); |
| if (skeleton->priv->changed_properties_idle_source != NULL) |
| { |
| g_source_destroy (skeleton->priv->changed_properties_idle_source); |
| skeleton->priv->changed_properties_idle_source = NULL; |
| emit_changed = TRUE; |
| } |
| g_mutex_unlock (&skeleton->priv->lock); |
| |
| if (emit_changed) |
| _sensor_threshold_emit_changed (skeleton); |
| } |
| |
| static void |
| _sensor_threshold_on_signal_warning ( |
| SensorThreshold *object) |
| { |
| SensorThresholdSkeleton *skeleton = SENSOR_THRESHOLD_SKELETON (object); |
| |
| GList *connections, *l; |
| GVariant *signal_variant; |
| connections = g_dbus_interface_skeleton_get_connections (G_DBUS_INTERFACE_SKELETON (skeleton)); |
| |
| signal_variant = g_variant_ref_sink (g_variant_new ("()")); |
| for (l = connections; l != NULL; l = l->next) |
| { |
| GDBusConnection *connection = l->data; |
| g_dbus_connection_emit_signal (connection, |
| NULL, g_dbus_interface_skeleton_get_object_path (G_DBUS_INTERFACE_SKELETON (skeleton)), "org.openbmc.SensorThreshold", "Warning", |
| signal_variant, NULL); |
| } |
| g_variant_unref (signal_variant); |
| g_list_free_full (connections, g_object_unref); |
| } |
| |
| static void |
| _sensor_threshold_on_signal_critical ( |
| SensorThreshold *object) |
| { |
| SensorThresholdSkeleton *skeleton = SENSOR_THRESHOLD_SKELETON (object); |
| |
| GList *connections, *l; |
| GVariant *signal_variant; |
| connections = g_dbus_interface_skeleton_get_connections (G_DBUS_INTERFACE_SKELETON (skeleton)); |
| |
| signal_variant = g_variant_ref_sink (g_variant_new ("()")); |
| for (l = connections; l != NULL; l = l->next) |
| { |
| GDBusConnection *connection = l->data; |
| g_dbus_connection_emit_signal (connection, |
| NULL, g_dbus_interface_skeleton_get_object_path (G_DBUS_INTERFACE_SKELETON (skeleton)), "org.openbmc.SensorThreshold", "Critical", |
| signal_variant, NULL); |
| } |
| g_variant_unref (signal_variant); |
| g_list_free_full (connections, g_object_unref); |
| } |
| |
| static void |
| _sensor_threshold_on_signal_normal ( |
| SensorThreshold *object) |
| { |
| SensorThresholdSkeleton *skeleton = SENSOR_THRESHOLD_SKELETON (object); |
| |
| GList *connections, *l; |
| GVariant *signal_variant; |
| connections = g_dbus_interface_skeleton_get_connections (G_DBUS_INTERFACE_SKELETON (skeleton)); |
| |
| signal_variant = g_variant_ref_sink (g_variant_new ("()")); |
| for (l = connections; l != NULL; l = l->next) |
| { |
| GDBusConnection *connection = l->data; |
| g_dbus_connection_emit_signal (connection, |
| NULL, g_dbus_interface_skeleton_get_object_path (G_DBUS_INTERFACE_SKELETON (skeleton)), "org.openbmc.SensorThreshold", "Normal", |
| signal_variant, NULL); |
| } |
| g_variant_unref (signal_variant); |
| g_list_free_full (connections, g_object_unref); |
| } |
| |
| static void sensor_threshold_skeleton_iface_init (SensorThresholdIface *iface); |
| #if GLIB_VERSION_MAX_ALLOWED >= GLIB_VERSION_2_38 |
| G_DEFINE_TYPE_WITH_CODE (SensorThresholdSkeleton, sensor_threshold_skeleton, G_TYPE_DBUS_INTERFACE_SKELETON, |
| G_ADD_PRIVATE (SensorThresholdSkeleton) |
| G_IMPLEMENT_INTERFACE (TYPE_SENSOR_THRESHOLD, sensor_threshold_skeleton_iface_init)); |
| |
| #else |
| G_DEFINE_TYPE_WITH_CODE (SensorThresholdSkeleton, sensor_threshold_skeleton, G_TYPE_DBUS_INTERFACE_SKELETON, |
| G_IMPLEMENT_INTERFACE (TYPE_SENSOR_THRESHOLD, sensor_threshold_skeleton_iface_init)); |
| |
| #endif |
| static void |
| sensor_threshold_skeleton_finalize (GObject *object) |
| { |
| SensorThresholdSkeleton *skeleton = SENSOR_THRESHOLD_SKELETON (object); |
| guint n; |
| for (n = 0; n < 5; n++) |
| g_value_unset (&skeleton->priv->properties[n]); |
| g_free (skeleton->priv->properties); |
| g_list_free_full (skeleton->priv->changed_properties, (GDestroyNotify) _changed_property_free); |
| if (skeleton->priv->changed_properties_idle_source != NULL) |
| g_source_destroy (skeleton->priv->changed_properties_idle_source); |
| g_main_context_unref (skeleton->priv->context); |
| g_mutex_clear (&skeleton->priv->lock); |
| G_OBJECT_CLASS (sensor_threshold_skeleton_parent_class)->finalize (object); |
| } |
| |
| static void |
| sensor_threshold_skeleton_get_property (GObject *object, |
| guint prop_id, |
| GValue *value, |
| GParamSpec *pspec G_GNUC_UNUSED) |
| { |
| SensorThresholdSkeleton *skeleton = SENSOR_THRESHOLD_SKELETON (object); |
| g_assert (prop_id != 0 && prop_id - 1 < 5); |
| g_mutex_lock (&skeleton->priv->lock); |
| g_value_copy (&skeleton->priv->properties[prop_id - 1], value); |
| g_mutex_unlock (&skeleton->priv->lock); |
| } |
| |
| static gboolean |
| _sensor_threshold_emit_changed (gpointer user_data) |
| { |
| SensorThresholdSkeleton *skeleton = SENSOR_THRESHOLD_SKELETON (user_data); |
| GList *l; |
| GVariantBuilder builder; |
| GVariantBuilder invalidated_builder; |
| guint num_changes; |
| |
| g_mutex_lock (&skeleton->priv->lock); |
| g_variant_builder_init (&builder, G_VARIANT_TYPE ("a{sv}")); |
| g_variant_builder_init (&invalidated_builder, G_VARIANT_TYPE ("as")); |
| for (l = skeleton->priv->changed_properties, num_changes = 0; l != NULL; l = l->next) |
| { |
| ChangedProperty *cp = l->data; |
| GVariant *variant; |
| const GValue *cur_value; |
| |
| cur_value = &skeleton->priv->properties[cp->prop_id - 1]; |
| if (!_g_value_equal (cur_value, &cp->orig_value)) |
| { |
| variant = g_dbus_gvalue_to_gvariant (cur_value, G_VARIANT_TYPE (cp->info->parent_struct.signature)); |
| g_variant_builder_add (&builder, "{sv}", cp->info->parent_struct.name, variant); |
| g_variant_unref (variant); |
| num_changes++; |
| } |
| } |
| if (num_changes > 0) |
| { |
| GList *connections, *ll; |
| GVariant *signal_variant; |
| signal_variant = g_variant_ref_sink (g_variant_new ("(sa{sv}as)", "org.openbmc.SensorThreshold", |
| &builder, &invalidated_builder)); |
| connections = g_dbus_interface_skeleton_get_connections (G_DBUS_INTERFACE_SKELETON (skeleton)); |
| for (ll = connections; ll != NULL; ll = ll->next) |
| { |
| GDBusConnection *connection = ll->data; |
| |
| g_dbus_connection_emit_signal (connection, |
| NULL, g_dbus_interface_skeleton_get_object_path (G_DBUS_INTERFACE_SKELETON (skeleton)), |
| "org.freedesktop.DBus.Properties", |
| "PropertiesChanged", |
| signal_variant, |
| NULL); |
| } |
| g_variant_unref (signal_variant); |
| g_list_free_full (connections, g_object_unref); |
| } |
| else |
| { |
| g_variant_builder_clear (&builder); |
| g_variant_builder_clear (&invalidated_builder); |
| } |
| g_list_free_full (skeleton->priv->changed_properties, (GDestroyNotify) _changed_property_free); |
| skeleton->priv->changed_properties = NULL; |
| skeleton->priv->changed_properties_idle_source = NULL; |
| g_mutex_unlock (&skeleton->priv->lock); |
| return FALSE; |
| } |
| |
| static void |
| _sensor_threshold_schedule_emit_changed (SensorThresholdSkeleton *skeleton, const _ExtendedGDBusPropertyInfo *info, guint prop_id, const GValue *orig_value) |
| { |
| ChangedProperty *cp; |
| GList *l; |
| cp = NULL; |
| for (l = skeleton->priv->changed_properties; l != NULL; l = l->next) |
| { |
| ChangedProperty *i_cp = l->data; |
| if (i_cp->info == info) |
| { |
| cp = i_cp; |
| break; |
| } |
| } |
| if (cp == NULL) |
| { |
| cp = g_new0 (ChangedProperty, 1); |
| cp->prop_id = prop_id; |
| cp->info = info; |
| skeleton->priv->changed_properties = g_list_prepend (skeleton->priv->changed_properties, cp); |
| g_value_init (&cp->orig_value, G_VALUE_TYPE (orig_value)); |
| g_value_copy (orig_value, &cp->orig_value); |
| } |
| } |
| |
| static void |
| sensor_threshold_skeleton_notify (GObject *object, |
| GParamSpec *pspec G_GNUC_UNUSED) |
| { |
| SensorThresholdSkeleton *skeleton = SENSOR_THRESHOLD_SKELETON (object); |
| g_mutex_lock (&skeleton->priv->lock); |
| if (skeleton->priv->changed_properties != NULL && |
| skeleton->priv->changed_properties_idle_source == NULL) |
| { |
| skeleton->priv->changed_properties_idle_source = g_idle_source_new (); |
| g_source_set_priority (skeleton->priv->changed_properties_idle_source, G_PRIORITY_DEFAULT); |
| g_source_set_callback (skeleton->priv->changed_properties_idle_source, _sensor_threshold_emit_changed, g_object_ref (skeleton), (GDestroyNotify) g_object_unref); |
| g_source_attach (skeleton->priv->changed_properties_idle_source, skeleton->priv->context); |
| g_source_unref (skeleton->priv->changed_properties_idle_source); |
| } |
| g_mutex_unlock (&skeleton->priv->lock); |
| } |
| |
| static void |
| sensor_threshold_skeleton_set_property (GObject *object, |
| guint prop_id, |
| const GValue *value, |
| GParamSpec *pspec) |
| { |
| SensorThresholdSkeleton *skeleton = SENSOR_THRESHOLD_SKELETON (object); |
| g_assert (prop_id != 0 && prop_id - 1 < 5); |
| g_mutex_lock (&skeleton->priv->lock); |
| g_object_freeze_notify (object); |
| if (!_g_value_equal (value, &skeleton->priv->properties[prop_id - 1])) |
| { |
| if (g_dbus_interface_skeleton_get_connection (G_DBUS_INTERFACE_SKELETON (skeleton)) != NULL) |
| _sensor_threshold_schedule_emit_changed (skeleton, _sensor_threshold_property_info_pointers[prop_id - 1], prop_id, &skeleton->priv->properties[prop_id - 1]); |
| g_value_copy (value, &skeleton->priv->properties[prop_id - 1]); |
| g_object_notify_by_pspec (object, pspec); |
| } |
| g_mutex_unlock (&skeleton->priv->lock); |
| g_object_thaw_notify (object); |
| } |
| |
| static void |
| sensor_threshold_skeleton_init (SensorThresholdSkeleton *skeleton) |
| { |
| #if GLIB_VERSION_MAX_ALLOWED >= GLIB_VERSION_2_38 |
| skeleton->priv = sensor_threshold_skeleton_get_instance_private (skeleton); |
| #else |
| skeleton->priv = G_TYPE_INSTANCE_GET_PRIVATE (skeleton, TYPE_SENSOR_THRESHOLD_SKELETON, SensorThresholdSkeletonPrivate); |
| #endif |
| |
| g_mutex_init (&skeleton->priv->lock); |
| skeleton->priv->context = g_main_context_ref_thread_default (); |
| skeleton->priv->properties = g_new0 (GValue, 5); |
| g_value_init (&skeleton->priv->properties[0], G_TYPE_VARIANT); |
| g_value_init (&skeleton->priv->properties[1], G_TYPE_VARIANT); |
| g_value_init (&skeleton->priv->properties[2], G_TYPE_VARIANT); |
| g_value_init (&skeleton->priv->properties[3], G_TYPE_VARIANT); |
| g_value_init (&skeleton->priv->properties[4], G_TYPE_UCHAR); |
| } |
| |
| static GVariant * |
| sensor_threshold_skeleton_get_lower_critical (SensorThreshold *object) |
| { |
| SensorThresholdSkeleton *skeleton = SENSOR_THRESHOLD_SKELETON (object); |
| GVariant *value; |
| g_mutex_lock (&skeleton->priv->lock); |
| value = g_value_get_variant (&(skeleton->priv->properties[0])); |
| g_mutex_unlock (&skeleton->priv->lock); |
| return value; |
| } |
| |
| static GVariant * |
| sensor_threshold_skeleton_get_lower_warning (SensorThreshold *object) |
| { |
| SensorThresholdSkeleton *skeleton = SENSOR_THRESHOLD_SKELETON (object); |
| GVariant *value; |
| g_mutex_lock (&skeleton->priv->lock); |
| value = g_value_get_variant (&(skeleton->priv->properties[1])); |
| g_mutex_unlock (&skeleton->priv->lock); |
| return value; |
| } |
| |
| static GVariant * |
| sensor_threshold_skeleton_get_upper_warning (SensorThreshold *object) |
| { |
| SensorThresholdSkeleton *skeleton = SENSOR_THRESHOLD_SKELETON (object); |
| GVariant *value; |
| g_mutex_lock (&skeleton->priv->lock); |
| value = g_value_get_variant (&(skeleton->priv->properties[2])); |
| g_mutex_unlock (&skeleton->priv->lock); |
| return value; |
| } |
| |
| static GVariant * |
| sensor_threshold_skeleton_get_upper_critical (SensorThreshold *object) |
| { |
| SensorThresholdSkeleton *skeleton = SENSOR_THRESHOLD_SKELETON (object); |
| GVariant *value; |
| g_mutex_lock (&skeleton->priv->lock); |
| value = g_value_get_variant (&(skeleton->priv->properties[3])); |
| g_mutex_unlock (&skeleton->priv->lock); |
| return value; |
| } |
| |
| static guchar |
| sensor_threshold_skeleton_get_state (SensorThreshold *object) |
| { |
| SensorThresholdSkeleton *skeleton = SENSOR_THRESHOLD_SKELETON (object); |
| guchar value; |
| g_mutex_lock (&skeleton->priv->lock); |
| value = g_value_get_uchar (&(skeleton->priv->properties[4])); |
| g_mutex_unlock (&skeleton->priv->lock); |
| return value; |
| } |
| |
| static void |
| sensor_threshold_skeleton_class_init (SensorThresholdSkeletonClass *klass) |
| { |
| GObjectClass *gobject_class; |
| GDBusInterfaceSkeletonClass *skeleton_class; |
| |
| gobject_class = G_OBJECT_CLASS (klass); |
| gobject_class->finalize = sensor_threshold_skeleton_finalize; |
| gobject_class->get_property = sensor_threshold_skeleton_get_property; |
| gobject_class->set_property = sensor_threshold_skeleton_set_property; |
| gobject_class->notify = sensor_threshold_skeleton_notify; |
| |
| |
| sensor_threshold_override_properties (gobject_class, 1); |
| |
| skeleton_class = G_DBUS_INTERFACE_SKELETON_CLASS (klass); |
| skeleton_class->get_info = sensor_threshold_skeleton_dbus_interface_get_info; |
| skeleton_class->get_properties = sensor_threshold_skeleton_dbus_interface_get_properties; |
| skeleton_class->flush = sensor_threshold_skeleton_dbus_interface_flush; |
| skeleton_class->get_vtable = sensor_threshold_skeleton_dbus_interface_get_vtable; |
| |
| #if GLIB_VERSION_MAX_ALLOWED < GLIB_VERSION_2_38 |
| g_type_class_add_private (klass, sizeof (SensorThresholdSkeletonPrivate)); |
| #endif |
| } |
| |
| static void |
| sensor_threshold_skeleton_iface_init (SensorThresholdIface *iface) |
| { |
| iface->warning = _sensor_threshold_on_signal_warning; |
| iface->critical = _sensor_threshold_on_signal_critical; |
| iface->normal = _sensor_threshold_on_signal_normal; |
| iface->get_lower_critical = sensor_threshold_skeleton_get_lower_critical; |
| iface->get_lower_warning = sensor_threshold_skeleton_get_lower_warning; |
| iface->get_upper_warning = sensor_threshold_skeleton_get_upper_warning; |
| iface->get_upper_critical = sensor_threshold_skeleton_get_upper_critical; |
| iface->get_state = sensor_threshold_skeleton_get_state; |
| } |
| |
| /** |
| * sensor_threshold_skeleton_new: |
| * |
| * Creates a skeleton object for the D-Bus interface <link linkend="gdbus-interface-org-openbmc-SensorThreshold.top_of_page">org.openbmc.SensorThreshold</link>. |
| * |
| * Returns: (transfer full) (type SensorThresholdSkeleton): The skeleton object. |
| */ |
| SensorThreshold * |
| sensor_threshold_skeleton_new (void) |
| { |
| return SENSOR_THRESHOLD (g_object_new (TYPE_SENSOR_THRESHOLD_SKELETON, NULL)); |
| } |
| |
| /* ------------------------------------------------------------------------ |
| * Code for interface org.openbmc.SensorI2c |
| * ------------------------------------------------------------------------ |
| */ |
| |
| /** |
| * SECTION:SensorI2c |
| * @title: SensorI2c |
| * @short_description: Generated C code for the org.openbmc.SensorI2c D-Bus interface |
| * |
| * This section contains code for working with the <link linkend="gdbus-interface-org-openbmc-SensorI2c.top_of_page">org.openbmc.SensorI2c</link> D-Bus interface in C. |
| */ |
| |
| /* ---- Introspection data for org.openbmc.SensorI2c ---- */ |
| |
| static const _ExtendedGDBusPropertyInfo _sensor_i2c_property_info_dev_path = |
| { |
| { |
| -1, |
| (gchar *) "dev_path", |
| (gchar *) "s", |
| G_DBUS_PROPERTY_INFO_FLAGS_READABLE | G_DBUS_PROPERTY_INFO_FLAGS_WRITABLE, |
| NULL |
| }, |
| "dev-path", |
| FALSE |
| }; |
| |
| static const _ExtendedGDBusPropertyInfo _sensor_i2c_property_info_address = |
| { |
| { |
| -1, |
| (gchar *) "address", |
| (gchar *) "s", |
| G_DBUS_PROPERTY_INFO_FLAGS_READABLE | G_DBUS_PROPERTY_INFO_FLAGS_WRITABLE, |
| NULL |
| }, |
| "address", |
| FALSE |
| }; |
| |
| static const _ExtendedGDBusPropertyInfo * const _sensor_i2c_property_info_pointers[] = |
| { |
| &_sensor_i2c_property_info_dev_path, |
| &_sensor_i2c_property_info_address, |
| NULL |
| }; |
| |
| static const _ExtendedGDBusInterfaceInfo _sensor_i2c_interface_info = |
| { |
| { |
| -1, |
| (gchar *) "org.openbmc.SensorI2c", |
| NULL, |
| NULL, |
| (GDBusPropertyInfo **) &_sensor_i2c_property_info_pointers, |
| NULL |
| }, |
| "sensor-i2c", |
| }; |
| |
| |
| /** |
| * sensor_i2c_interface_info: |
| * |
| * Gets a machine-readable description of the <link linkend="gdbus-interface-org-openbmc-SensorI2c.top_of_page">org.openbmc.SensorI2c</link> D-Bus interface. |
| * |
| * Returns: (transfer none): A #GDBusInterfaceInfo. Do not free. |
| */ |
| GDBusInterfaceInfo * |
| sensor_i2c_interface_info (void) |
| { |
| return (GDBusInterfaceInfo *) &_sensor_i2c_interface_info.parent_struct; |
| } |
| |
| /** |
| * sensor_i2c_override_properties: |
| * @klass: The class structure for a #GObject<!-- -->-derived class. |
| * @property_id_begin: The property id to assign to the first overridden property. |
| * |
| * Overrides all #GObject properties in the #SensorI2c interface for a concrete class. |
| * The properties are overridden in the order they are defined. |
| * |
| * Returns: The last property id. |
| */ |
| guint |
| sensor_i2c_override_properties (GObjectClass *klass, guint property_id_begin) |
| { |
| g_object_class_override_property (klass, property_id_begin++, "dev-path"); |
| g_object_class_override_property (klass, property_id_begin++, "address"); |
| return property_id_begin - 1; |
| } |
| |
| |
| |
| /** |
| * SensorI2c: |
| * |
| * Abstract interface type for the D-Bus interface <link linkend="gdbus-interface-org-openbmc-SensorI2c.top_of_page">org.openbmc.SensorI2c</link>. |
| */ |
| |
| /** |
| * SensorI2cIface: |
| * @parent_iface: The parent interface. |
| * @get_address: Getter for the #SensorI2c:address property. |
| * @get_dev_path: Getter for the #SensorI2c:dev-path property. |
| * |
| * Virtual table for the D-Bus interface <link linkend="gdbus-interface-org-openbmc-SensorI2c.top_of_page">org.openbmc.SensorI2c</link>. |
| */ |
| |
| typedef SensorI2cIface SensorI2cInterface; |
| G_DEFINE_INTERFACE (SensorI2c, sensor_i2c, G_TYPE_OBJECT); |
| |
| static void |
| sensor_i2c_default_init (SensorI2cIface *iface) |
| { |
| /* GObject properties for D-Bus properties: */ |
| /** |
| * SensorI2c:dev-path: |
| * |
| * Represents the D-Bus property <link linkend="gdbus-property-org-openbmc-SensorI2c.dev_path">"dev_path"</link>. |
| * |
| * Since the D-Bus property for this #GObject property is both readable and writable, it is meaningful to both read from it and write to it on both the service- and client-side. |
| */ |
| g_object_interface_install_property (iface, |
| g_param_spec_string ("dev-path", "dev_path", "dev_path", NULL, G_PARAM_READWRITE | G_PARAM_STATIC_STRINGS)); |
| /** |
| * SensorI2c:address: |
| * |
| * Represents the D-Bus property <link linkend="gdbus-property-org-openbmc-SensorI2c.address">"address"</link>. |
| * |
| * Since the D-Bus property for this #GObject property is both readable and writable, it is meaningful to both read from it and write to it on both the service- and client-side. |
| */ |
| g_object_interface_install_property (iface, |
| g_param_spec_string ("address", "address", "address", NULL, G_PARAM_READWRITE | G_PARAM_STATIC_STRINGS)); |
| } |
| |
| /** |
| * sensor_i2c_get_dev_path: (skip) |
| * @object: A #SensorI2c. |
| * |
| * Gets the value of the <link linkend="gdbus-property-org-openbmc-SensorI2c.dev_path">"dev_path"</link> D-Bus property. |
| * |
| * Since this D-Bus property is both readable and writable, it is meaningful to use this function on both the client- and service-side. |
| * |
| * <warning>The returned value is only valid until the property changes so on the client-side it is only safe to use this function on the thread where @object was constructed. Use sensor_i2c_dup_dev_path() if on another thread.</warning> |
| * |
| * Returns: (transfer none): The property value or %NULL if the property is not set. Do not free the returned value, it belongs to @object. |
| */ |
| const gchar * |
| sensor_i2c_get_dev_path (SensorI2c *object) |
| { |
| return SENSOR_I2C_GET_IFACE (object)->get_dev_path (object); |
| } |
| |
| /** |
| * sensor_i2c_dup_dev_path: (skip) |
| * @object: A #SensorI2c. |
| * |
| * Gets a copy of the <link linkend="gdbus-property-org-openbmc-SensorI2c.dev_path">"dev_path"</link> D-Bus property. |
| * |
| * Since this D-Bus property is both readable and writable, it is meaningful to use this function on both the client- and service-side. |
| * |
| * Returns: (transfer full): The property value or %NULL if the property is not set. The returned value should be freed with g_free(). |
| */ |
| gchar * |
| sensor_i2c_dup_dev_path (SensorI2c *object) |
| { |
| gchar *value; |
| g_object_get (G_OBJECT (object), "dev-path", &value, NULL); |
| return value; |
| } |
| |
| /** |
| * sensor_i2c_set_dev_path: (skip) |
| * @object: A #SensorI2c. |
| * @value: The value to set. |
| * |
| * Sets the <link linkend="gdbus-property-org-openbmc-SensorI2c.dev_path">"dev_path"</link> D-Bus property to @value. |
| * |
| * Since this D-Bus property is both readable and writable, it is meaningful to use this function on both the client- and service-side. |
| */ |
| void |
| sensor_i2c_set_dev_path (SensorI2c *object, const gchar *value) |
| { |
| g_object_set (G_OBJECT (object), "dev-path", value, NULL); |
| } |
| |
| /** |
| * sensor_i2c_get_address: (skip) |
| * @object: A #SensorI2c. |
| * |
| * Gets the value of the <link linkend="gdbus-property-org-openbmc-SensorI2c.address">"address"</link> D-Bus property. |
| * |
| * Since this D-Bus property is both readable and writable, it is meaningful to use this function on both the client- and service-side. |
| * |
| * <warning>The returned value is only valid until the property changes so on the client-side it is only safe to use this function on the thread where @object was constructed. Use sensor_i2c_dup_address() if on another thread.</warning> |
| * |
| * Returns: (transfer none): The property value or %NULL if the property is not set. Do not free the returned value, it belongs to @object. |
| */ |
| const gchar * |
| sensor_i2c_get_address (SensorI2c *object) |
| { |
| return SENSOR_I2C_GET_IFACE (object)->get_address (object); |
| } |
| |
| /** |
| * sensor_i2c_dup_address: (skip) |
| * @object: A #SensorI2c. |
| * |
| * Gets a copy of the <link linkend="gdbus-property-org-openbmc-SensorI2c.address">"address"</link> D-Bus property. |
| * |
| * Since this D-Bus property is both readable and writable, it is meaningful to use this function on both the client- and service-side. |
| * |
| * Returns: (transfer full): The property value or %NULL if the property is not set. The returned value should be freed with g_free(). |
| */ |
| gchar * |
| sensor_i2c_dup_address (SensorI2c *object) |
| { |
| gchar *value; |
| g_object_get (G_OBJECT (object), "address", &value, NULL); |
| return value; |
| } |
| |
| /** |
| * sensor_i2c_set_address: (skip) |
| * @object: A #SensorI2c. |
| * @value: The value to set. |
| * |
| * Sets the <link linkend="gdbus-property-org-openbmc-SensorI2c.address">"address"</link> D-Bus property to @value. |
| * |
| * Since this D-Bus property is both readable and writable, it is meaningful to use this function on both the client- and service-side. |
| */ |
| void |
| sensor_i2c_set_address (SensorI2c *object, const gchar *value) |
| { |
| g_object_set (G_OBJECT (object), "address", value, NULL); |
| } |
| |
| /* ------------------------------------------------------------------------ */ |
| |
| /** |
| * SensorI2cProxy: |
| * |
| * The #SensorI2cProxy structure contains only private data and should only be accessed using the provided API. |
| */ |
| |
| /** |
| * SensorI2cProxyClass: |
| * @parent_class: The parent class. |
| * |
| * Class structure for #SensorI2cProxy. |
| */ |
| |
| struct _SensorI2cProxyPrivate |
| { |
| GData *qdata; |
| }; |
| |
| static void sensor_i2c_proxy_iface_init (SensorI2cIface *iface); |
| |
| #if GLIB_VERSION_MAX_ALLOWED >= GLIB_VERSION_2_38 |
| G_DEFINE_TYPE_WITH_CODE (SensorI2cProxy, sensor_i2c_proxy, G_TYPE_DBUS_PROXY, |
| G_ADD_PRIVATE (SensorI2cProxy) |
| G_IMPLEMENT_INTERFACE (TYPE_SENSOR_I2C, sensor_i2c_proxy_iface_init)); |
| |
| #else |
| G_DEFINE_TYPE_WITH_CODE (SensorI2cProxy, sensor_i2c_proxy, G_TYPE_DBUS_PROXY, |
| G_IMPLEMENT_INTERFACE (TYPE_SENSOR_I2C, sensor_i2c_proxy_iface_init)); |
| |
| #endif |
| static void |
| sensor_i2c_proxy_finalize (GObject *object) |
| { |
| SensorI2cProxy *proxy = SENSOR_I2C_PROXY (object); |
| g_datalist_clear (&proxy->priv->qdata); |
| G_OBJECT_CLASS (sensor_i2c_proxy_parent_class)->finalize (object); |
| } |
| |
| static void |
| sensor_i2c_proxy_get_property (GObject *object, |
| guint prop_id, |
| GValue *value, |
| GParamSpec *pspec G_GNUC_UNUSED) |
| { |
| const _ExtendedGDBusPropertyInfo *info; |
| GVariant *variant; |
| g_assert (prop_id != 0 && prop_id - 1 < 2); |
| info = _sensor_i2c_property_info_pointers[prop_id - 1]; |
| variant = g_dbus_proxy_get_cached_property (G_DBUS_PROXY (object), info->parent_struct.name); |
| if (info->use_gvariant) |
| { |
| g_value_set_variant (value, variant); |
| } |
| else |
| { |
| if (variant != NULL) |
| g_dbus_gvariant_to_gvalue (variant, value); |
| } |
| if (variant != NULL) |
| g_variant_unref (variant); |
| } |
| |
| static void |
| sensor_i2c_proxy_set_property_cb (GDBusProxy *proxy, |
| GAsyncResult *res, |
| gpointer user_data) |
| { |
| const _ExtendedGDBusPropertyInfo *info = user_data; |
| GError *error; |
| GVariant *_ret; |
| error = NULL; |
| _ret = g_dbus_proxy_call_finish (proxy, res, &error); |
| if (!_ret) |
| { |
| g_warning ("Error setting property '%s' on interface org.openbmc.SensorI2c: %s (%s, %d)", |
| info->parent_struct.name, |
| error->message, g_quark_to_string (error->domain), error->code); |
| g_error_free (error); |
| } |
| else |
| { |
| g_variant_unref (_ret); |
| } |
| } |
| |
| static void |
| sensor_i2c_proxy_set_property (GObject *object, |
| guint prop_id, |
| const GValue *value, |
| GParamSpec *pspec G_GNUC_UNUSED) |
| { |
| const _ExtendedGDBusPropertyInfo *info; |
| GVariant *variant; |
| g_assert (prop_id != 0 && prop_id - 1 < 2); |
| info = _sensor_i2c_property_info_pointers[prop_id - 1]; |
| variant = g_dbus_gvalue_to_gvariant (value, G_VARIANT_TYPE (info->parent_struct.signature)); |
| g_dbus_proxy_call (G_DBUS_PROXY (object), |
| "org.freedesktop.DBus.Properties.Set", |
| g_variant_new ("(ssv)", "org.openbmc.SensorI2c", info->parent_struct.name, variant), |
| G_DBUS_CALL_FLAGS_NONE, |
| -1, |
| NULL, (GAsyncReadyCallback) sensor_i2c_proxy_set_property_cb, (GDBusPropertyInfo *) &info->parent_struct); |
| g_variant_unref (variant); |
| } |
| |
| static void |
| sensor_i2c_proxy_g_signal (GDBusProxy *proxy, |
| const gchar *sender_name G_GNUC_UNUSED, |
| const gchar *signal_name, |
| GVariant *parameters) |
| { |
| _ExtendedGDBusSignalInfo *info; |
| GVariantIter iter; |
| GVariant *child; |
| GValue *paramv; |
| guint num_params; |
| guint n; |
| guint signal_id; |
| info = (_ExtendedGDBusSignalInfo *) g_dbus_interface_info_lookup_signal ((GDBusInterfaceInfo *) &_sensor_i2c_interface_info.parent_struct, signal_name); |
| if (info == NULL) |
| return; |
| num_params = g_variant_n_children (parameters); |
| paramv = g_new0 (GValue, num_params + 1); |
| g_value_init (¶mv[0], TYPE_SENSOR_I2C); |
| g_value_set_object (¶mv[0], proxy); |
| g_variant_iter_init (&iter, parameters); |
| n = 1; |
| while ((child = g_variant_iter_next_value (&iter)) != NULL) |
| { |
| _ExtendedGDBusArgInfo *arg_info = (_ExtendedGDBusArgInfo *) info->parent_struct.args[n - 1]; |
| if (arg_info->use_gvariant) |
| { |
| g_value_init (¶mv[n], G_TYPE_VARIANT); |
| g_value_set_variant (¶mv[n], child); |
| n++; |
| } |
| else |
| g_dbus_gvariant_to_gvalue (child, ¶mv[n++]); |
| g_variant_unref (child); |
| } |
| signal_id = g_signal_lookup (info->signal_name, TYPE_SENSOR_I2C); |
| g_signal_emitv (paramv, signal_id, 0, NULL); |
| for (n = 0; n < num_params + 1; n++) |
| g_value_unset (¶mv[n]); |
| g_free (paramv); |
| } |
| |
| static void |
| sensor_i2c_proxy_g_properties_changed (GDBusProxy *_proxy, |
| GVariant *changed_properties, |
| const gchar *const *invalidated_properties) |
| { |
| SensorI2cProxy *proxy = SENSOR_I2C_PROXY (_proxy); |
| guint n; |
| const gchar *key; |
| GVariantIter *iter; |
| _ExtendedGDBusPropertyInfo *info; |
| g_variant_get (changed_properties, "a{sv}", &iter); |
| while (g_variant_iter_next (iter, "{&sv}", &key, NULL)) |
| { |
| info = (_ExtendedGDBusPropertyInfo *) g_dbus_interface_info_lookup_property ((GDBusInterfaceInfo *) &_sensor_i2c_interface_info.parent_struct, key); |
| g_datalist_remove_data (&proxy->priv->qdata, key); |
| if (info != NULL) |
| g_object_notify (G_OBJECT (proxy), info->hyphen_name); |
| } |
| g_variant_iter_free (iter); |
| for (n = 0; invalidated_properties[n] != NULL; n++) |
| { |
| info = (_ExtendedGDBusPropertyInfo *) g_dbus_interface_info_lookup_property ((GDBusInterfaceInfo *) &_sensor_i2c_interface_info.parent_struct, invalidated_properties[n]); |
| g_datalist_remove_data (&proxy->priv->qdata, invalidated_properties[n]); |
| if (info != NULL) |
| g_object_notify (G_OBJECT (proxy), info->hyphen_name); |
| } |
| } |
| |
| static const gchar * |
| sensor_i2c_proxy_get_dev_path (SensorI2c *object) |
| { |
| SensorI2cProxy *proxy = SENSOR_I2C_PROXY (object); |
| GVariant *variant; |
| const gchar *value = NULL; |
| variant = g_dbus_proxy_get_cached_property (G_DBUS_PROXY (proxy), "dev_path"); |
| if (variant != NULL) |
| { |
| value = g_variant_get_string (variant, NULL); |
| g_variant_unref (variant); |
| } |
| return value; |
| } |
| |
| static const gchar * |
| sensor_i2c_proxy_get_address (SensorI2c *object) |
| { |
| SensorI2cProxy *proxy = SENSOR_I2C_PROXY (object); |
| GVariant *variant; |
| const gchar *value = NULL; |
| variant = g_dbus_proxy_get_cached_property (G_DBUS_PROXY (proxy), "address"); |
| if (variant != NULL) |
| { |
| value = g_variant_get_string (variant, NULL); |
| g_variant_unref (variant); |
| } |
| return value; |
| } |
| |
| static void |
| sensor_i2c_proxy_init (SensorI2cProxy *proxy) |
| { |
| #if GLIB_VERSION_MAX_ALLOWED >= GLIB_VERSION_2_38 |
| proxy->priv = sensor_i2c_proxy_get_instance_private (proxy); |
| #else |
| proxy->priv = G_TYPE_INSTANCE_GET_PRIVATE (proxy, TYPE_SENSOR_I2C_PROXY, SensorI2cProxyPrivate); |
| #endif |
| |
| g_dbus_proxy_set_interface_info (G_DBUS_PROXY (proxy), sensor_i2c_interface_info ()); |
| } |
| |
| static void |
| sensor_i2c_proxy_class_init (SensorI2cProxyClass *klass) |
| { |
| GObjectClass *gobject_class; |
| GDBusProxyClass *proxy_class; |
| |
| gobject_class = G_OBJECT_CLASS (klass); |
| gobject_class->finalize = sensor_i2c_proxy_finalize; |
| gobject_class->get_property = sensor_i2c_proxy_get_property; |
| gobject_class->set_property = sensor_i2c_proxy_set_property; |
| |
| proxy_class = G_DBUS_PROXY_CLASS (klass); |
| proxy_class->g_signal = sensor_i2c_proxy_g_signal; |
| proxy_class->g_properties_changed = sensor_i2c_proxy_g_properties_changed; |
| |
| sensor_i2c_override_properties (gobject_class, 1); |
| |
| #if GLIB_VERSION_MAX_ALLOWED < GLIB_VERSION_2_38 |
| g_type_class_add_private (klass, sizeof (SensorI2cProxyPrivate)); |
| #endif |
| } |
| |
| static void |
| sensor_i2c_proxy_iface_init (SensorI2cIface *iface) |
| { |
| iface->get_dev_path = sensor_i2c_proxy_get_dev_path; |
| iface->get_address = sensor_i2c_proxy_get_address; |
| } |
| |
| /** |
| * sensor_i2c_proxy_new: |
| * @connection: A #GDBusConnection. |
| * @flags: Flags from the #GDBusProxyFlags enumeration. |
| * @name: (allow-none): A bus name (well-known or unique) or %NULL if @connection is not a message bus connection. |
| * @object_path: An object path. |
| * @cancellable: (allow-none): A #GCancellable or %NULL. |
| * @callback: A #GAsyncReadyCallback to call when the request is satisfied. |
| * @user_data: User data to pass to @callback. |
| * |
| * Asynchronously creates a proxy for the D-Bus interface <link linkend="gdbus-interface-org-openbmc-SensorI2c.top_of_page">org.openbmc.SensorI2c</link>. See g_dbus_proxy_new() for more details. |
| * |
| * When the operation is finished, @callback will be invoked in the <link linkend="g-main-context-push-thread-default">thread-default main loop</link> of the thread you are calling this method from. |
| * You can then call sensor_i2c_proxy_new_finish() to get the result of the operation. |
| * |
| * See sensor_i2c_proxy_new_sync() for the synchronous, blocking version of this constructor. |
| */ |
| void |
| sensor_i2c_proxy_new ( |
| GDBusConnection *connection, |
| GDBusProxyFlags flags, |
| const gchar *name, |
| const gchar *object_path, |
| GCancellable *cancellable, |
| GAsyncReadyCallback callback, |
| gpointer user_data) |
| { |
| g_async_initable_new_async (TYPE_SENSOR_I2C_PROXY, G_PRIORITY_DEFAULT, cancellable, callback, user_data, "g-flags", flags, "g-name", name, "g-connection", connection, "g-object-path", object_path, "g-interface-name", "org.openbmc.SensorI2c", NULL); |
| } |
| |
| /** |
| * sensor_i2c_proxy_new_finish: |
| * @res: The #GAsyncResult obtained from the #GAsyncReadyCallback passed to sensor_i2c_proxy_new(). |
| * @error: Return location for error or %NULL |
| * |
| * Finishes an operation started with sensor_i2c_proxy_new(). |
| * |
| * Returns: (transfer full) (type SensorI2cProxy): The constructed proxy object or %NULL if @error is set. |
| */ |
| SensorI2c * |
| sensor_i2c_proxy_new_finish ( |
| GAsyncResult *res, |
| GError **error) |
| { |
| GObject *ret; |
| GObject *source_object; |
| source_object = g_async_result_get_source_object (res); |
| ret = g_async_initable_new_finish (G_ASYNC_INITABLE (source_object), res, error); |
| g_object_unref (source_object); |
| if (ret != NULL) |
| return SENSOR_I2C (ret); |
| else |
| return NULL; |
| } |
| |
| /** |
| * sensor_i2c_proxy_new_sync: |
| * @connection: A #GDBusConnection. |
| * @flags: Flags from the #GDBusProxyFlags enumeration. |
| * @name: (allow-none): A bus name (well-known or unique) or %NULL if @connection is not a message bus connection. |
| * @object_path: An object path. |
| * @cancellable: (allow-none): A #GCancellable or %NULL. |
| * @error: Return location for error or %NULL |
| * |
| * Synchronously creates a proxy for the D-Bus interface <link linkend="gdbus-interface-org-openbmc-SensorI2c.top_of_page">org.openbmc.SensorI2c</link>. See g_dbus_proxy_new_sync() for more details. |
| * |
| * The calling thread is blocked until a reply is received. |
| * |
| * See sensor_i2c_proxy_new() for the asynchronous version of this constructor. |
| * |
| * Returns: (transfer full) (type SensorI2cProxy): The constructed proxy object or %NULL if @error is set. |
| */ |
| SensorI2c * |
| sensor_i2c_proxy_new_sync ( |
| GDBusConnection *connection, |
| GDBusProxyFlags flags, |
| const gchar *name, |
| const gchar *object_path, |
| GCancellable *cancellable, |
| GError **error) |
| { |
| GInitable *ret; |
| ret = g_initable_new (TYPE_SENSOR_I2C_PROXY, cancellable, error, "g-flags", flags, "g-name", name, "g-connection", connection, "g-object-path", object_path, "g-interface-name", "org.openbmc.SensorI2c", NULL); |
| if (ret != NULL) |
| return SENSOR_I2C (ret); |
| else |
| return NULL; |
| } |
| |
| |
| /** |
| * sensor_i2c_proxy_new_for_bus: |
| * @bus_type: A #GBusType. |
| * @flags: Flags from the #GDBusProxyFlags enumeration. |
| * @name: A bus name (well-known or unique). |
| * @object_path: An object path. |
| * @cancellable: (allow-none): A #GCancellable or %NULL. |
| * @callback: A #GAsyncReadyCallback to call when the request is satisfied. |
| * @user_data: User data to pass to @callback. |
| * |
| * Like sensor_i2c_proxy_new() but takes a #GBusType instead of a #GDBusConnection. |
| * |
| * When the operation is finished, @callback will be invoked in the <link linkend="g-main-context-push-thread-default">thread-default main loop</link> of the thread you are calling this method from. |
| * You can then call sensor_i2c_proxy_new_for_bus_finish() to get the result of the operation. |
| * |
| * See sensor_i2c_proxy_new_for_bus_sync() for the synchronous, blocking version of this constructor. |
| */ |
| void |
| sensor_i2c_proxy_new_for_bus ( |
| GBusType bus_type, |
| GDBusProxyFlags flags, |
| const gchar *name, |
| const gchar *object_path, |
| GCancellable *cancellable, |
| GAsyncReadyCallback callback, |
| gpointer user_data) |
| { |
| g_async_initable_new_async (TYPE_SENSOR_I2C_PROXY, G_PRIORITY_DEFAULT, cancellable, callback, user_data, "g-flags", flags, "g-name", name, "g-bus-type", bus_type, "g-object-path", object_path, "g-interface-name", "org.openbmc.SensorI2c", NULL); |
| } |
| |
| /** |
| * sensor_i2c_proxy_new_for_bus_finish: |
| * @res: The #GAsyncResult obtained from the #GAsyncReadyCallback passed to sensor_i2c_proxy_new_for_bus(). |
| * @error: Return location for error or %NULL |
| * |
| * Finishes an operation started with sensor_i2c_proxy_new_for_bus(). |
| * |
| * Returns: (transfer full) (type SensorI2cProxy): The constructed proxy object or %NULL if @error is set. |
| */ |
| SensorI2c * |
| sensor_i2c_proxy_new_for_bus_finish ( |
| GAsyncResult *res, |
| GError **error) |
| { |
| GObject *ret; |
| GObject *source_object; |
| source_object = g_async_result_get_source_object (res); |
| ret = g_async_initable_new_finish (G_ASYNC_INITABLE (source_object), res, error); |
| g_object_unref (source_object); |
| if (ret != NULL) |
| return SENSOR_I2C (ret); |
| else |
| return NULL; |
| } |
| |
| /** |
| * sensor_i2c_proxy_new_for_bus_sync: |
| * @bus_type: A #GBusType. |
| * @flags: Flags from the #GDBusProxyFlags enumeration. |
| * @name: A bus name (well-known or unique). |
| * @object_path: An object path. |
| * @cancellable: (allow-none): A #GCancellable or %NULL. |
| * @error: Return location for error or %NULL |
| * |
| * Like sensor_i2c_proxy_new_sync() but takes a #GBusType instead of a #GDBusConnection. |
| * |
| * The calling thread is blocked until a reply is received. |
| * |
| * See sensor_i2c_proxy_new_for_bus() for the asynchronous version of this constructor. |
| * |
| * Returns: (transfer full) (type SensorI2cProxy): The constructed proxy object or %NULL if @error is set. |
| */ |
| SensorI2c * |
| sensor_i2c_proxy_new_for_bus_sync ( |
| GBusType bus_type, |
| GDBusProxyFlags flags, |
| const gchar *name, |
| const gchar *object_path, |
| GCancellable *cancellable, |
| GError **error) |
| { |
| GInitable *ret; |
| ret = g_initable_new (TYPE_SENSOR_I2C_PROXY, cancellable, error, "g-flags", flags, "g-name", name, "g-bus-type", bus_type, "g-object-path", object_path, "g-interface-name", "org.openbmc.SensorI2c", NULL); |
| if (ret != NULL) |
| return SENSOR_I2C (ret); |
| else |
| return NULL; |
| } |
| |
| |
| /* ------------------------------------------------------------------------ */ |
| |
| /** |
| * SensorI2cSkeleton: |
| * |
| * The #SensorI2cSkeleton structure contains only private data and should only be accessed using the provided API. |
| */ |
| |
| /** |
| * SensorI2cSkeletonClass: |
| * @parent_class: The parent class. |
| * |
| * Class structure for #SensorI2cSkeleton. |
| */ |
| |
| struct _SensorI2cSkeletonPrivate |
| { |
| GValue *properties; |
| GList *changed_properties; |
| GSource *changed_properties_idle_source; |
| GMainContext *context; |
| GMutex lock; |
| }; |
| |
| static void |
| _sensor_i2c_skeleton_handle_method_call ( |
| GDBusConnection *connection G_GNUC_UNUSED, |
| const gchar *sender G_GNUC_UNUSED, |
| const gchar *object_path G_GNUC_UNUSED, |
| const gchar *interface_name, |
| const gchar *method_name, |
| GVariant *parameters, |
| GDBusMethodInvocation *invocation, |
| gpointer user_data) |
| { |
| SensorI2cSkeleton *skeleton = SENSOR_I2C_SKELETON (user_data); |
| _ExtendedGDBusMethodInfo *info; |
| GVariantIter iter; |
| GVariant *child; |
| GValue *paramv; |
| guint num_params; |
| guint num_extra; |
| guint n; |
| guint signal_id; |
| GValue return_value = G_VALUE_INIT; |
| info = (_ExtendedGDBusMethodInfo *) g_dbus_method_invocation_get_method_info (invocation); |
| g_assert (info != NULL); |
| num_params = g_variant_n_children (parameters); |
| num_extra = info->pass_fdlist ? 3 : 2; paramv = g_new0 (GValue, num_params + num_extra); |
| n = 0; |
| g_value_init (¶mv[n], TYPE_SENSOR_I2C); |
| g_value_set_object (¶mv[n++], skeleton); |
| g_value_init (¶mv[n], G_TYPE_DBUS_METHOD_INVOCATION); |
| g_value_set_object (¶mv[n++], invocation); |
| if (info->pass_fdlist) |
| { |
| #ifdef G_OS_UNIX |
| g_value_init (¶mv[n], G_TYPE_UNIX_FD_LIST); |
| g_value_set_object (¶mv[n++], g_dbus_message_get_unix_fd_list (g_dbus_method_invocation_get_message (invocation))); |
| #else |
| g_assert_not_reached (); |
| #endif |
| } |
| g_variant_iter_init (&iter, parameters); |
| while ((child = g_variant_iter_next_value (&iter)) != NULL) |
| { |
| _ExtendedGDBusArgInfo *arg_info = (_ExtendedGDBusArgInfo *) info->parent_struct.in_args[n - num_extra]; |
| if (arg_info->use_gvariant) |
| { |
| g_value_init (¶mv[n], G_TYPE_VARIANT); |
| g_value_set_variant (¶mv[n], child); |
| n++; |
| } |
| else |
| g_dbus_gvariant_to_gvalue (child, ¶mv[n++]); |
| g_variant_unref (child); |
| } |
| signal_id = g_signal_lookup (info->signal_name, TYPE_SENSOR_I2C); |
| g_value_init (&return_value, G_TYPE_BOOLEAN); |
| g_signal_emitv (paramv, signal_id, 0, &return_value); |
| if (!g_value_get_boolean (&return_value)) |
| g_dbus_method_invocation_return_error (invocation, G_DBUS_ERROR, G_DBUS_ERROR_UNKNOWN_METHOD, "Method %s is not implemented on interface %s", method_name, interface_name); |
| g_value_unset (&return_value); |
| for (n = 0; n < num_params + num_extra; n++) |
| g_value_unset (¶mv[n]); |
| g_free (paramv); |
| } |
| |
| static GVariant * |
| _sensor_i2c_skeleton_handle_get_property ( |
| GDBusConnection *connection G_GNUC_UNUSED, |
| const gchar *sender G_GNUC_UNUSED, |
| const gchar *object_path G_GNUC_UNUSED, |
| const gchar *interface_name G_GNUC_UNUSED, |
| const gchar *property_name, |
| GError **error, |
| gpointer user_data) |
| { |
| SensorI2cSkeleton *skeleton = SENSOR_I2C_SKELETON (user_data); |
| GValue value = G_VALUE_INIT; |
| GParamSpec *pspec; |
| _ExtendedGDBusPropertyInfo *info; |
| GVariant *ret; |
| ret = NULL; |
| info = (_ExtendedGDBusPropertyInfo *) g_dbus_interface_info_lookup_property ((GDBusInterfaceInfo *) &_sensor_i2c_interface_info.parent_struct, property_name); |
| g_assert (info != NULL); |
| pspec = g_object_class_find_property (G_OBJECT_GET_CLASS (skeleton), info->hyphen_name); |
| if (pspec == NULL) |
| { |
| g_set_error (error, G_DBUS_ERROR, G_DBUS_ERROR_INVALID_ARGS, "No property with name %s", property_name); |
| } |
| else |
| { |
| g_value_init (&value, pspec->value_type); |
| g_object_get_property (G_OBJECT (skeleton), info->hyphen_name, &value); |
| ret = g_dbus_gvalue_to_gvariant (&value, G_VARIANT_TYPE (info->parent_struct.signature)); |
| g_value_unset (&value); |
| } |
| return ret; |
| } |
| |
| static gboolean |
| _sensor_i2c_skeleton_handle_set_property ( |
| GDBusConnection *connection G_GNUC_UNUSED, |
| const gchar *sender G_GNUC_UNUSED, |
| const gchar *object_path G_GNUC_UNUSED, |
| const gchar *interface_name G_GNUC_UNUSED, |
| const gchar *property_name, |
| GVariant *variant, |
| GError **error, |
| gpointer user_data) |
| { |
| SensorI2cSkeleton *skeleton = SENSOR_I2C_SKELETON (user_data); |
| GValue value = G_VALUE_INIT; |
| GParamSpec *pspec; |
| _ExtendedGDBusPropertyInfo *info; |
| gboolean ret; |
| ret = FALSE; |
| info = (_ExtendedGDBusPropertyInfo *) g_dbus_interface_info_lookup_property ((GDBusInterfaceInfo *) &_sensor_i2c_interface_info.parent_struct, property_name); |
| g_assert (info != NULL); |
| pspec = g_object_class_find_property (G_OBJECT_GET_CLASS (skeleton), info->hyphen_name); |
| if (pspec == NULL) |
| { |
| g_set_error (error, G_DBUS_ERROR, G_DBUS_ERROR_INVALID_ARGS, "No property with name %s", property_name); |
| } |
| else |
| { |
| if (info->use_gvariant) |
| g_value_set_variant (&value, variant); |
| else |
| g_dbus_gvariant_to_gvalue (variant, &value); |
| g_object_set_property (G_OBJECT (skeleton), info->hyphen_name, &value); |
| g_value_unset (&value); |
| ret = TRUE; |
| } |
| return ret; |
| } |
| |
| static const GDBusInterfaceVTable _sensor_i2c_skeleton_vtable = |
| { |
| _sensor_i2c_skeleton_handle_method_call, |
| _sensor_i2c_skeleton_handle_get_property, |
| _sensor_i2c_skeleton_handle_set_property, |
| {NULL} |
| }; |
| |
| static GDBusInterfaceInfo * |
| sensor_i2c_skeleton_dbus_interface_get_info (GDBusInterfaceSkeleton *skeleton G_GNUC_UNUSED) |
| { |
| return sensor_i2c_interface_info (); |
| } |
| |
| static GDBusInterfaceVTable * |
| sensor_i2c_skeleton_dbus_interface_get_vtable (GDBusInterfaceSkeleton *skeleton G_GNUC_UNUSED) |
| { |
| return (GDBusInterfaceVTable *) &_sensor_i2c_skeleton_vtable; |
| } |
| |
| static GVariant * |
| sensor_i2c_skeleton_dbus_interface_get_properties (GDBusInterfaceSkeleton *_skeleton) |
| { |
| SensorI2cSkeleton *skeleton = SENSOR_I2C_SKELETON (_skeleton); |
| |
| GVariantBuilder builder; |
| guint n; |
| g_variant_builder_init (&builder, G_VARIANT_TYPE ("a{sv}")); |
| if (_sensor_i2c_interface_info.parent_struct.properties == NULL) |
| goto out; |
| for (n = 0; _sensor_i2c_interface_info.parent_struct.properties[n] != NULL; n++) |
| { |
| GDBusPropertyInfo *info = _sensor_i2c_interface_info.parent_struct.properties[n]; |
| if (info->flags & G_DBUS_PROPERTY_INFO_FLAGS_READABLE) |
| { |
| GVariant *value; |
| value = _sensor_i2c_skeleton_handle_get_property (g_dbus_interface_skeleton_get_connection (G_DBUS_INTERFACE_SKELETON (skeleton)), NULL, g_dbus_interface_skeleton_get_object_path (G_DBUS_INTERFACE_SKELETON (skeleton)), "org.openbmc.SensorI2c", info->name, NULL, skeleton); |
| if (value != NULL) |
| { |
| g_variant_take_ref (value); |
| g_variant_builder_add (&builder, "{sv}", info->name, value); |
| g_variant_unref (value); |
| } |
| } |
| } |
| out: |
| return g_variant_builder_end (&builder); |
| } |
| |
| static gboolean _sensor_i2c_emit_changed (gpointer user_data); |
| |
| static void |
| sensor_i2c_skeleton_dbus_interface_flush (GDBusInterfaceSkeleton *_skeleton) |
| { |
| SensorI2cSkeleton *skeleton = SENSOR_I2C_SKELETON (_skeleton); |
| gboolean emit_changed = FALSE; |
| |
| g_mutex_lock (&skeleton->priv->lock); |
| if (skeleton->priv->changed_properties_idle_source != NULL) |
| { |
| g_source_destroy (skeleton->priv->changed_properties_idle_source); |
| skeleton->priv->changed_properties_idle_source = NULL; |
| emit_changed = TRUE; |
| } |
| g_mutex_unlock (&skeleton->priv->lock); |
| |
| if (emit_changed) |
| _sensor_i2c_emit_changed (skeleton); |
| } |
| |
| static void sensor_i2c_skeleton_iface_init (SensorI2cIface *iface); |
| #if GLIB_VERSION_MAX_ALLOWED >= GLIB_VERSION_2_38 |
| G_DEFINE_TYPE_WITH_CODE (SensorI2cSkeleton, sensor_i2c_skeleton, G_TYPE_DBUS_INTERFACE_SKELETON, |
| G_ADD_PRIVATE (SensorI2cSkeleton) |
| G_IMPLEMENT_INTERFACE (TYPE_SENSOR_I2C, sensor_i2c_skeleton_iface_init)); |
| |
| #else |
| G_DEFINE_TYPE_WITH_CODE (SensorI2cSkeleton, sensor_i2c_skeleton, G_TYPE_DBUS_INTERFACE_SKELETON, |
| G_IMPLEMENT_INTERFACE (TYPE_SENSOR_I2C, sensor_i2c_skeleton_iface_init)); |
| |
| #endif |
| static void |
| sensor_i2c_skeleton_finalize (GObject *object) |
| { |
| SensorI2cSkeleton *skeleton = SENSOR_I2C_SKELETON (object); |
| guint n; |
| for (n = 0; n < 2; n++) |
| g_value_unset (&skeleton->priv->properties[n]); |
| g_free (skeleton->priv->properties); |
| g_list_free_full (skeleton->priv->changed_properties, (GDestroyNotify) _changed_property_free); |
| if (skeleton->priv->changed_properties_idle_source != NULL) |
| g_source_destroy (skeleton->priv->changed_properties_idle_source); |
| g_main_context_unref (skeleton->priv->context); |
| g_mutex_clear (&skeleton->priv->lock); |
| G_OBJECT_CLASS (sensor_i2c_skeleton_parent_class)->finalize (object); |
| } |
| |
| static void |
| sensor_i2c_skeleton_get_property (GObject *object, |
| guint prop_id, |
| GValue *value, |
| GParamSpec *pspec G_GNUC_UNUSED) |
| { |
| SensorI2cSkeleton *skeleton = SENSOR_I2C_SKELETON (object); |
| g_assert (prop_id != 0 && prop_id - 1 < 2); |
| g_mutex_lock (&skeleton->priv->lock); |
| g_value_copy (&skeleton->priv->properties[prop_id - 1], value); |
| g_mutex_unlock (&skeleton->priv->lock); |
| } |
| |
| static gboolean |
| _sensor_i2c_emit_changed (gpointer user_data) |
| { |
| SensorI2cSkeleton *skeleton = SENSOR_I2C_SKELETON (user_data); |
| GList *l; |
| GVariantBuilder builder; |
| GVariantBuilder invalidated_builder; |
| guint num_changes; |
| |
| g_mutex_lock (&skeleton->priv->lock); |
| g_variant_builder_init (&builder, G_VARIANT_TYPE ("a{sv}")); |
| g_variant_builder_init (&invalidated_builder, G_VARIANT_TYPE ("as")); |
| for (l = skeleton->priv->changed_properties, num_changes = 0; l != NULL; l = l->next) |
| { |
| ChangedProperty *cp = l->data; |
| GVariant *variant; |
| const GValue *cur_value; |
| |
| cur_value = &skeleton->priv->properties[cp->prop_id - 1]; |
| if (!_g_value_equal (cur_value, &cp->orig_value)) |
| { |
| variant = g_dbus_gvalue_to_gvariant (cur_value, G_VARIANT_TYPE (cp->info->parent_struct.signature)); |
| g_variant_builder_add (&builder, "{sv}", cp->info->parent_struct.name, variant); |
| g_variant_unref (variant); |
| num_changes++; |
| } |
| } |
| if (num_changes > 0) |
| { |
| GList *connections, *ll; |
| GVariant *signal_variant; |
| signal_variant = g_variant_ref_sink (g_variant_new ("(sa{sv}as)", "org.openbmc.SensorI2c", |
| &builder, &invalidated_builder)); |
| connections = g_dbus_interface_skeleton_get_connections (G_DBUS_INTERFACE_SKELETON (skeleton)); |
| for (ll = connections; ll != NULL; ll = ll->next) |
| { |
| GDBusConnection *connection = ll->data; |
| |
| g_dbus_connection_emit_signal (connection, |
| NULL, g_dbus_interface_skeleton_get_object_path (G_DBUS_INTERFACE_SKELETON (skeleton)), |
| "org.freedesktop.DBus.Properties", |
| "PropertiesChanged", |
| signal_variant, |
| NULL); |
| } |
| g_variant_unref (signal_variant); |
| g_list_free_full (connections, g_object_unref); |
| } |
| else |
| { |
| g_variant_builder_clear (&builder); |
| g_variant_builder_clear (&invalidated_builder); |
| } |
| g_list_free_full (skeleton->priv->changed_properties, (GDestroyNotify) _changed_property_free); |
| skeleton->priv->changed_properties = NULL; |
| skeleton->priv->changed_properties_idle_source = NULL; |
| g_mutex_unlock (&skeleton->priv->lock); |
| return FALSE; |
| } |
| |
| static void |
| _sensor_i2c_schedule_emit_changed (SensorI2cSkeleton *skeleton, const _ExtendedGDBusPropertyInfo *info, guint prop_id, const GValue *orig_value) |
| { |
| ChangedProperty *cp; |
| GList *l; |
| cp = NULL; |
| for (l = skeleton->priv->changed_properties; l != NULL; l = l->next) |
| { |
| ChangedProperty *i_cp = l->data; |
| if (i_cp->info == info) |
| { |
| cp = i_cp; |
| break; |
| } |
| } |
| if (cp == NULL) |
| { |
| cp = g_new0 (ChangedProperty, 1); |
| cp->prop_id = prop_id; |
| cp->info = info; |
| skeleton->priv->changed_properties = g_list_prepend (skeleton->priv->changed_properties, cp); |
| g_value_init (&cp->orig_value, G_VALUE_TYPE (orig_value)); |
| g_value_copy (orig_value, &cp->orig_value); |
| } |
| } |
| |
| static void |
| sensor_i2c_skeleton_notify (GObject *object, |
| GParamSpec *pspec G_GNUC_UNUSED) |
| { |
| SensorI2cSkeleton *skeleton = SENSOR_I2C_SKELETON (object); |
| g_mutex_lock (&skeleton->priv->lock); |
| if (skeleton->priv->changed_properties != NULL && |
| skeleton->priv->changed_properties_idle_source == NULL) |
| { |
| skeleton->priv->changed_properties_idle_source = g_idle_source_new (); |
| g_source_set_priority (skeleton->priv->changed_properties_idle_source, G_PRIORITY_DEFAULT); |
| g_source_set_callback (skeleton->priv->changed_properties_idle_source, _sensor_i2c_emit_changed, g_object_ref (skeleton), (GDestroyNotify) g_object_unref); |
| g_source_attach (skeleton->priv->changed_properties_idle_source, skeleton->priv->context); |
| g_source_unref (skeleton->priv->changed_properties_idle_source); |
| } |
| g_mutex_unlock (&skeleton->priv->lock); |
| } |
| |
| static void |
| sensor_i2c_skeleton_set_property (GObject *object, |
| guint prop_id, |
| const GValue *value, |
| GParamSpec *pspec) |
| { |
| SensorI2cSkeleton *skeleton = SENSOR_I2C_SKELETON (object); |
| g_assert (prop_id != 0 && prop_id - 1 < 2); |
| g_mutex_lock (&skeleton->priv->lock); |
| g_object_freeze_notify (object); |
| if (!_g_value_equal (value, &skeleton->priv->properties[prop_id - 1])) |
| { |
| if (g_dbus_interface_skeleton_get_connection (G_DBUS_INTERFACE_SKELETON (skeleton)) != NULL) |
| _sensor_i2c_schedule_emit_changed (skeleton, _sensor_i2c_property_info_pointers[prop_id - 1], prop_id, &skeleton->priv->properties[prop_id - 1]); |
| g_value_copy (value, &skeleton->priv->properties[prop_id - 1]); |
| g_object_notify_by_pspec (object, pspec); |
| } |
| g_mutex_unlock (&skeleton->priv->lock); |
| g_object_thaw_notify (object); |
| } |
| |
| static void |
| sensor_i2c_skeleton_init (SensorI2cSkeleton *skeleton) |
| { |
| #if GLIB_VERSION_MAX_ALLOWED >= GLIB_VERSION_2_38 |
| skeleton->priv = sensor_i2c_skeleton_get_instance_private (skeleton); |
| #else |
| skeleton->priv = G_TYPE_INSTANCE_GET_PRIVATE (skeleton, TYPE_SENSOR_I2C_SKELETON, SensorI2cSkeletonPrivate); |
| #endif |
| |
| g_mutex_init (&skeleton->priv->lock); |
| skeleton->priv->context = g_main_context_ref_thread_default (); |
| skeleton->priv->properties = g_new0 (GValue, 2); |
| g_value_init (&skeleton->priv->properties[0], G_TYPE_STRING); |
| g_value_init (&skeleton->priv->properties[1], G_TYPE_STRING); |
| } |
| |
| static const gchar * |
| sensor_i2c_skeleton_get_dev_path (SensorI2c *object) |
| { |
| SensorI2cSkeleton *skeleton = SENSOR_I2C_SKELETON (object); |
| const gchar *value; |
| g_mutex_lock (&skeleton->priv->lock); |
| value = g_value_get_string (&(skeleton->priv->properties[0])); |
| g_mutex_unlock (&skeleton->priv->lock); |
| return value; |
| } |
| |
| static const gchar * |
| sensor_i2c_skeleton_get_address (SensorI2c *object) |
| { |
| SensorI2cSkeleton *skeleton = SENSOR_I2C_SKELETON (object); |
| const gchar *value; |
| g_mutex_lock (&skeleton->priv->lock); |
| value = g_value_get_string (&(skeleton->priv->properties[1])); |
| g_mutex_unlock (&skeleton->priv->lock); |
| return value; |
| } |
| |
| static void |
| sensor_i2c_skeleton_class_init (SensorI2cSkeletonClass *klass) |
| { |
| GObjectClass *gobject_class; |
| GDBusInterfaceSkeletonClass *skeleton_class; |
| |
| gobject_class = G_OBJECT_CLASS (klass); |
| gobject_class->finalize = sensor_i2c_skeleton_finalize; |
| gobject_class->get_property = sensor_i2c_skeleton_get_property; |
| gobject_class->set_property = sensor_i2c_skeleton_set_property; |
| gobject_class->notify = sensor_i2c_skeleton_notify; |
| |
| |
| sensor_i2c_override_properties (gobject_class, 1); |
| |
| skeleton_class = G_DBUS_INTERFACE_SKELETON_CLASS (klass); |
| skeleton_class->get_info = sensor_i2c_skeleton_dbus_interface_get_info; |
| skeleton_class->get_properties = sensor_i2c_skeleton_dbus_interface_get_properties; |
| skeleton_class->flush = sensor_i2c_skeleton_dbus_interface_flush; |
| skeleton_class->get_vtable = sensor_i2c_skeleton_dbus_interface_get_vtable; |
| |
| #if GLIB_VERSION_MAX_ALLOWED < GLIB_VERSION_2_38 |
| g_type_class_add_private (klass, sizeof (SensorI2cSkeletonPrivate)); |
| #endif |
| } |
| |
| static void |
| sensor_i2c_skeleton_iface_init (SensorI2cIface *iface) |
| { |
| iface->get_dev_path = sensor_i2c_skeleton_get_dev_path; |
| iface->get_address = sensor_i2c_skeleton_get_address; |
| } |
| |
| /** |
| * sensor_i2c_skeleton_new: |
| * |
| * Creates a skeleton object for the D-Bus interface <link linkend="gdbus-interface-org-openbmc-SensorI2c.top_of_page">org.openbmc.SensorI2c</link>. |
| * |
| * Returns: (transfer full) (type SensorI2cSkeleton): The skeleton object. |
| */ |
| SensorI2c * |
| sensor_i2c_skeleton_new (void) |
| { |
| return SENSOR_I2C (g_object_new (TYPE_SENSOR_I2C_SKELETON, NULL)); |
| } |
| |
| /* ------------------------------------------------------------------------ |
| * Code for Object, ObjectProxy and ObjectSkeleton |
| * ------------------------------------------------------------------------ |
| */ |
| |
| /** |
| * SECTION:Object |
| * @title: Object |
| * @short_description: Specialized GDBusObject types |
| * |
| * This section contains the #Object, #ObjectProxy, and #ObjectSkeleton types which make it easier to work with objects implementing generated types for D-Bus interfaces. |
| */ |
| |
| /** |
| * Object: |
| * |
| * The #Object type is a specialized container of interfaces. |
| */ |
| |
| /** |
| * ObjectIface: |
| * @parent_iface: The parent interface. |
| * |
| * Virtual table for the #Object interface. |
| */ |
| |
| typedef ObjectIface ObjectInterface; |
| G_DEFINE_INTERFACE_WITH_CODE (Object, object, G_TYPE_OBJECT, g_type_interface_add_prerequisite (g_define_type_id, G_TYPE_DBUS_OBJECT)); |
| |
| static void |
| object_default_init (ObjectIface *iface) |
| { |
| /** |
| * Object:sensor-value: |
| * |
| * The #SensorValue instance corresponding to the D-Bus interface <link linkend="gdbus-interface-org-openbmc-SensorValue.top_of_page">org.openbmc.SensorValue</link>, if any. |
| * |
| * Connect to the #GObject::notify signal to get informed of property changes. |
| */ |
| g_object_interface_install_property (iface, g_param_spec_object ("sensor-value", "sensor-value", "sensor-value", TYPE_SENSOR_VALUE, G_PARAM_READWRITE|G_PARAM_STATIC_STRINGS)); |
| |
| /** |
| * Object:sensor-threshold: |
| * |
| * The #SensorThreshold instance corresponding to the D-Bus interface <link linkend="gdbus-interface-org-openbmc-SensorThreshold.top_of_page">org.openbmc.SensorThreshold</link>, if any. |
| * |
| * Connect to the #GObject::notify signal to get informed of property changes. |
| */ |
| g_object_interface_install_property (iface, g_param_spec_object ("sensor-threshold", "sensor-threshold", "sensor-threshold", TYPE_SENSOR_THRESHOLD, G_PARAM_READWRITE|G_PARAM_STATIC_STRINGS)); |
| |
| /** |
| * Object:sensor-i2c: |
| * |
| * The #SensorI2c instance corresponding to the D-Bus interface <link linkend="gdbus-interface-org-openbmc-SensorI2c.top_of_page">org.openbmc.SensorI2c</link>, if any. |
| * |
| * Connect to the #GObject::notify signal to get informed of property changes. |
| */ |
| g_object_interface_install_property (iface, g_param_spec_object ("sensor-i2c", "sensor-i2c", "sensor-i2c", TYPE_SENSOR_I2C, G_PARAM_READWRITE|G_PARAM_STATIC_STRINGS)); |
| |
| } |
| |
| /** |
| * object_get_sensor_value: |
| * @object: A #Object. |
| * |
| * Gets the #SensorValue instance for the D-Bus interface <link linkend="gdbus-interface-org-openbmc-SensorValue.top_of_page">org.openbmc.SensorValue</link> on @object, if any. |
| * |
| * Returns: (transfer full): A #SensorValue that must be freed with g_object_unref() or %NULL if @object does not implement the interface. |
| */ |
| SensorValue *object_get_sensor_value (Object *object) |
| { |
| GDBusInterface *ret; |
| ret = g_dbus_object_get_interface (G_DBUS_OBJECT (object), "org.openbmc.SensorValue"); |
| if (ret == NULL) |
| return NULL; |
| return SENSOR_VALUE (ret); |
| } |
| |
| /** |
| * object_get_sensor_threshold: |
| * @object: A #Object. |
| * |
| * Gets the #SensorThreshold instance for the D-Bus interface <link linkend="gdbus-interface-org-openbmc-SensorThreshold.top_of_page">org.openbmc.SensorThreshold</link> on @object, if any. |
| * |
| * Returns: (transfer full): A #SensorThreshold that must be freed with g_object_unref() or %NULL if @object does not implement the interface. |
| */ |
| SensorThreshold *object_get_sensor_threshold (Object *object) |
| { |
| GDBusInterface *ret; |
| ret = g_dbus_object_get_interface (G_DBUS_OBJECT (object), "org.openbmc.SensorThreshold"); |
| if (ret == NULL) |
| return NULL; |
| return SENSOR_THRESHOLD (ret); |
| } |
| |
| /** |
| * object_get_sensor_i2c: |
| * @object: A #Object. |
| * |
| * Gets the #SensorI2c instance for the D-Bus interface <link linkend="gdbus-interface-org-openbmc-SensorI2c.top_of_page">org.openbmc.SensorI2c</link> on @object, if any. |
| * |
| * Returns: (transfer full): A #SensorI2c that must be freed with g_object_unref() or %NULL if @object does not implement the interface. |
| */ |
| SensorI2c *object_get_sensor_i2c (Object *object) |
| { |
| GDBusInterface *ret; |
| ret = g_dbus_object_get_interface (G_DBUS_OBJECT (object), "org.openbmc.SensorI2c"); |
| if (ret == NULL) |
| return NULL; |
| return SENSOR_I2C (ret); |
| } |
| |
| |
| /** |
| * object_peek_sensor_value: (skip) |
| * @object: A #Object. |
| * |
| * Like object_get_sensor_value() but doesn't increase the reference count on the returned object. |
| * |
| * <warning>It is not safe to use the returned object if you are on another thread than the one where the #GDBusObjectManagerClient or #GDBusObjectManagerServer for @object is running.</warning> |
| * |
| * Returns: (transfer none): A #SensorValue or %NULL if @object does not implement the interface. Do not free the returned object, it is owned by @object. |
| */ |
| SensorValue *object_peek_sensor_value (Object *object) |
| { |
| GDBusInterface *ret; |
| ret = g_dbus_object_get_interface (G_DBUS_OBJECT (object), "org.openbmc.SensorValue"); |
| if (ret == NULL) |
| return NULL; |
| g_object_unref (ret); |
| return SENSOR_VALUE (ret); |
| } |
| |
| /** |
| * object_peek_sensor_threshold: (skip) |
| * @object: A #Object. |
| * |
| * Like object_get_sensor_threshold() but doesn't increase the reference count on the returned object. |
| * |
| * <warning>It is not safe to use the returned object if you are on another thread than the one where the #GDBusObjectManagerClient or #GDBusObjectManagerServer for @object is running.</warning> |
| * |
| * Returns: (transfer none): A #SensorThreshold or %NULL if @object does not implement the interface. Do not free the returned object, it is owned by @object. |
| */ |
| SensorThreshold *object_peek_sensor_threshold (Object *object) |
| { |
| GDBusInterface *ret; |
| ret = g_dbus_object_get_interface (G_DBUS_OBJECT (object), "org.openbmc.SensorThreshold"); |
| if (ret == NULL) |
| return NULL; |
| g_object_unref (ret); |
| return SENSOR_THRESHOLD (ret); |
| } |
| |
| /** |
| * object_peek_sensor_i2c: (skip) |
| * @object: A #Object. |
| * |
| * Like object_get_sensor_i2c() but doesn't increase the reference count on the returned object. |
| * |
| * <warning>It is not safe to use the returned object if you are on another thread than the one where the #GDBusObjectManagerClient or #GDBusObjectManagerServer for @object is running.</warning> |
| * |
| * Returns: (transfer none): A #SensorI2c or %NULL if @object does not implement the interface. Do not free the returned object, it is owned by @object. |
| */ |
| SensorI2c *object_peek_sensor_i2c (Object *object) |
| { |
| GDBusInterface *ret; |
| ret = g_dbus_object_get_interface (G_DBUS_OBJECT (object), "org.openbmc.SensorI2c"); |
| if (ret == NULL) |
| return NULL; |
| g_object_unref (ret); |
| return SENSOR_I2C (ret); |
| } |
| |
| |
| static void |
| object_notify (GDBusObject *object, GDBusInterface *interface) |
| { |
| _ExtendedGDBusInterfaceInfo *info = (_ExtendedGDBusInterfaceInfo *) g_dbus_interface_get_info (interface); |
| /* info can be NULL if the other end is using a D-Bus interface we don't know |
| * anything about, for example old generated code in this process talking to |
| * newer generated code in the other process. */ |
| if (info != NULL) |
| g_object_notify (G_OBJECT (object), info->hyphen_name); |
| } |
| |
| /** |
| * ObjectProxy: |
| * |
| * The #ObjectProxy structure contains only private data and should only be accessed using the provided API. |
| */ |
| |
| /** |
| * ObjectProxyClass: |
| * @parent_class: The parent class. |
| * |
| * Class structure for #ObjectProxy. |
| */ |
| |
| static void |
| object_proxy__object_iface_init (ObjectIface *iface G_GNUC_UNUSED) |
| { |
| } |
| |
| static void |
| object_proxy__g_dbus_object_iface_init (GDBusObjectIface *iface) |
| { |
| iface->interface_added = object_notify; |
| iface->interface_removed = object_notify; |
| } |
| |
| |
| G_DEFINE_TYPE_WITH_CODE (ObjectProxy, object_proxy, G_TYPE_DBUS_OBJECT_PROXY, |
| G_IMPLEMENT_INTERFACE (TYPE_OBJECT, object_proxy__object_iface_init) |
| G_IMPLEMENT_INTERFACE (G_TYPE_DBUS_OBJECT, object_proxy__g_dbus_object_iface_init)); |
| |
| static void |
| object_proxy_init (ObjectProxy *object G_GNUC_UNUSED) |
| { |
| } |
| |
| static void |
| object_proxy_set_property (GObject *gobject, |
| guint prop_id, |
| const GValue *value G_GNUC_UNUSED, |
| GParamSpec *pspec) |
| { |
| G_OBJECT_WARN_INVALID_PROPERTY_ID (gobject, prop_id, pspec); |
| } |
| |
| static void |
| object_proxy_get_property (GObject *gobject, |
| guint prop_id, |
| GValue *value, |
| GParamSpec *pspec) |
| { |
| ObjectProxy *object = OBJECT_PROXY (gobject); |
| GDBusInterface *interface; |
| |
| switch (prop_id) |
| { |
| case 1: |
| interface = g_dbus_object_get_interface (G_DBUS_OBJECT (object), "org.openbmc.SensorValue"); |
| g_value_take_object (value, interface); |
| break; |
| |
| case 2: |
| interface = g_dbus_object_get_interface (G_DBUS_OBJECT (object), "org.openbmc.SensorThreshold"); |
| g_value_take_object (value, interface); |
| break; |
| |
| case 3: |
| interface = g_dbus_object_get_interface (G_DBUS_OBJECT (object), "org.openbmc.SensorI2c"); |
| g_value_take_object (value, interface); |
| break; |
| |
| default: |
| G_OBJECT_WARN_INVALID_PROPERTY_ID (gobject, prop_id, pspec); |
| break; |
| } |
| } |
| |
| static void |
| object_proxy_class_init (ObjectProxyClass *klass) |
| { |
| GObjectClass *gobject_class = G_OBJECT_CLASS (klass); |
| |
| gobject_class->set_property = object_proxy_set_property; |
| gobject_class->get_property = object_proxy_get_property; |
| |
| g_object_class_override_property (gobject_class, 1, "sensor-value"); |
| g_object_class_override_property (gobject_class, 2, "sensor-threshold"); |
| g_object_class_override_property (gobject_class, 3, "sensor-i2c"); |
| } |
| |
| /** |
| * object_proxy_new: |
| * @connection: A #GDBusConnection. |
| * @object_path: An object path. |
| * |
| * Creates a new proxy object. |
| * |
| * Returns: (transfer full): The proxy object. |
| */ |
| ObjectProxy * |
| object_proxy_new (GDBusConnection *connection, |
| const gchar *object_path) |
| { |
| g_return_val_if_fail (G_IS_DBUS_CONNECTION (connection), NULL); |
| g_return_val_if_fail (g_variant_is_object_path (object_path), NULL); |
| return OBJECT_PROXY (g_object_new (TYPE_OBJECT_PROXY, "g-connection", connection, "g-object-path", object_path, NULL)); |
| } |
| |
| /** |
| * ObjectSkeleton: |
| * |
| * The #ObjectSkeleton structure contains only private data and should only be accessed using the provided API. |
| */ |
| |
| /** |
| * ObjectSkeletonClass: |
| * @parent_class: The parent class. |
| * |
| * Class structure for #ObjectSkeleton. |
| */ |
| |
| static void |
| object_skeleton__object_iface_init (ObjectIface *iface G_GNUC_UNUSED) |
| { |
| } |
| |
| |
| static void |
| object_skeleton__g_dbus_object_iface_init (GDBusObjectIface *iface) |
| { |
| iface->interface_added = object_notify; |
| iface->interface_removed = object_notify; |
| } |
| |
| G_DEFINE_TYPE_WITH_CODE (ObjectSkeleton, object_skeleton, G_TYPE_DBUS_OBJECT_SKELETON, |
| G_IMPLEMENT_INTERFACE (TYPE_OBJECT, object_skeleton__object_iface_init) |
| G_IMPLEMENT_INTERFACE (G_TYPE_DBUS_OBJECT, object_skeleton__g_dbus_object_iface_init)); |
| |
| static void |
| object_skeleton_init (ObjectSkeleton *object G_GNUC_UNUSED) |
| { |
| } |
| |
| static void |
| object_skeleton_set_property (GObject *gobject, |
| guint prop_id, |
| const GValue *value, |
| GParamSpec *pspec) |
| { |
| ObjectSkeleton *object = OBJECT_SKELETON (gobject); |
| GDBusInterfaceSkeleton *interface; |
| |
| switch (prop_id) |
| { |
| case 1: |
| interface = g_value_get_object (value); |
| if (interface != NULL) |
| { |
| g_warn_if_fail (IS_SENSOR_VALUE (interface)); |
| g_dbus_object_skeleton_add_interface (G_DBUS_OBJECT_SKELETON (object), interface); |
| } |
| else |
| { |
| g_dbus_object_skeleton_remove_interface_by_name (G_DBUS_OBJECT_SKELETON (object), "org.openbmc.SensorValue"); |
| } |
| break; |
| |
| case 2: |
| interface = g_value_get_object (value); |
| if (interface != NULL) |
| { |
| g_warn_if_fail (IS_SENSOR_THRESHOLD (interface)); |
| g_dbus_object_skeleton_add_interface (G_DBUS_OBJECT_SKELETON (object), interface); |
| } |
| else |
| { |
| g_dbus_object_skeleton_remove_interface_by_name (G_DBUS_OBJECT_SKELETON (object), "org.openbmc.SensorThreshold"); |
| } |
| break; |
| |
| case 3: |
| interface = g_value_get_object (value); |
| if (interface != NULL) |
| { |
| g_warn_if_fail (IS_SENSOR_I2C (interface)); |
| g_dbus_object_skeleton_add_interface (G_DBUS_OBJECT_SKELETON (object), interface); |
| } |
| else |
| { |
| g_dbus_object_skeleton_remove_interface_by_name (G_DBUS_OBJECT_SKELETON (object), "org.openbmc.SensorI2c"); |
| } |
| break; |
| |
| default: |
| G_OBJECT_WARN_INVALID_PROPERTY_ID (gobject, prop_id, pspec); |
| break; |
| } |
| } |
| |
| static void |
| object_skeleton_get_property (GObject *gobject, |
| guint prop_id, |
| GValue *value, |
| GParamSpec *pspec) |
| { |
| ObjectSkeleton *object = OBJECT_SKELETON (gobject); |
| GDBusInterface *interface; |
| |
| switch (prop_id) |
| { |
| case 1: |
| interface = g_dbus_object_get_interface (G_DBUS_OBJECT (object), "org.openbmc.SensorValue"); |
| g_value_take_object (value, interface); |
| break; |
| |
| case 2: |
| interface = g_dbus_object_get_interface (G_DBUS_OBJECT (object), "org.openbmc.SensorThreshold"); |
| g_value_take_object (value, interface); |
| break; |
| |
| case 3: |
| interface = g_dbus_object_get_interface (G_DBUS_OBJECT (object), "org.openbmc.SensorI2c"); |
| g_value_take_object (value, interface); |
| break; |
| |
| default: |
| G_OBJECT_WARN_INVALID_PROPERTY_ID (gobject, prop_id, pspec); |
| break; |
| } |
| } |
| |
| static void |
| object_skeleton_class_init (ObjectSkeletonClass *klass) |
| { |
| GObjectClass *gobject_class = G_OBJECT_CLASS (klass); |
| |
| gobject_class->set_property = object_skeleton_set_property; |
| gobject_class->get_property = object_skeleton_get_property; |
| |
| g_object_class_override_property (gobject_class, 1, "sensor-value"); |
| g_object_class_override_property (gobject_class, 2, "sensor-threshold"); |
| g_object_class_override_property (gobject_class, 3, "sensor-i2c"); |
| } |
| |
| /** |
| * object_skeleton_new: |
| * @object_path: An object path. |
| * |
| * Creates a new skeleton object. |
| * |
| * Returns: (transfer full): The skeleton object. |
| */ |
| ObjectSkeleton * |
| object_skeleton_new (const gchar *object_path) |
| { |
| g_return_val_if_fail (g_variant_is_object_path (object_path), NULL); |
| return OBJECT_SKELETON (g_object_new (TYPE_OBJECT_SKELETON, "g-object-path", object_path, NULL)); |
| } |
| |
| /** |
| * object_skeleton_set_sensor_value: |
| * @object: A #ObjectSkeleton. |
| * @interface_: (allow-none): A #SensorValue or %NULL to clear the interface. |
| * |
| * Sets the #SensorValue instance for the D-Bus interface <link linkend="gdbus-interface-org-openbmc-SensorValue.top_of_page">org.openbmc.SensorValue</link> on @object. |
| */ |
| void object_skeleton_set_sensor_value (ObjectSkeleton *object, SensorValue *interface_) |
| { |
| g_object_set (G_OBJECT (object), "sensor-value", interface_, NULL); |
| } |
| |
| /** |
| * object_skeleton_set_sensor_threshold: |
| * @object: A #ObjectSkeleton. |
| * @interface_: (allow-none): A #SensorThreshold or %NULL to clear the interface. |
| * |
| * Sets the #SensorThreshold instance for the D-Bus interface <link linkend="gdbus-interface-org-openbmc-SensorThreshold.top_of_page">org.openbmc.SensorThreshold</link> on @object. |
| */ |
| void object_skeleton_set_sensor_threshold (ObjectSkeleton *object, SensorThreshold *interface_) |
| { |
| g_object_set (G_OBJECT (object), "sensor-threshold", interface_, NULL); |
| } |
| |
| /** |
| * object_skeleton_set_sensor_i2c: |
| * @object: A #ObjectSkeleton. |
| * @interface_: (allow-none): A #SensorI2c or %NULL to clear the interface. |
| * |
| * Sets the #SensorI2c instance for the D-Bus interface <link linkend="gdbus-interface-org-openbmc-SensorI2c.top_of_page">org.openbmc.SensorI2c</link> on @object. |
| */ |
| void object_skeleton_set_sensor_i2c (ObjectSkeleton *object, SensorI2c *interface_) |
| { |
| g_object_set (G_OBJECT (object), "sensor-i2c", interface_, NULL); |
| } |
| |
| |
| /* ------------------------------------------------------------------------ |
| * Code for ObjectManager client |
| * ------------------------------------------------------------------------ |
| */ |
| |
| /** |
| * SECTION:ObjectManagerClient |
| * @title: ObjectManagerClient |
| * @short_description: Generated GDBusObjectManagerClient type |
| * |
| * This section contains a #GDBusObjectManagerClient that uses object_manager_client_get_proxy_type() as the #GDBusProxyTypeFunc. |
| */ |
| |
| /** |
| * ObjectManagerClient: |
| * |
| * The #ObjectManagerClient structure contains only private data and should only be accessed using the provided API. |
| */ |
| |
| /** |
| * ObjectManagerClientClass: |
| * @parent_class: The parent class. |
| * |
| * Class structure for #ObjectManagerClient. |
| */ |
| |
| G_DEFINE_TYPE (ObjectManagerClient, object_manager_client, G_TYPE_DBUS_OBJECT_MANAGER_CLIENT); |
| |
| static void |
| object_manager_client_init (ObjectManagerClient *manager G_GNUC_UNUSED) |
| { |
| } |
| |
| static void |
| object_manager_client_class_init (ObjectManagerClientClass *klass G_GNUC_UNUSED) |
| { |
| } |
| |
| /** |
| * object_manager_client_get_proxy_type: |
| * @manager: A #GDBusObjectManagerClient. |
| * @object_path: The object path of the remote object (unused). |
| * @interface_name: (allow-none): Interface name of the remote object or %NULL to get the object proxy #GType. |
| * @user_data: User data (unused). |
| * |
| * A #GDBusProxyTypeFunc that maps @interface_name to the generated #GDBusObjectProxy<!-- -->- and #GDBusProxy<!-- -->-derived types. |
| * |
| * Returns: A #GDBusProxy<!-- -->-derived #GType if @interface_name is not %NULL, otherwise the #GType for #ObjectProxy. |
| */ |
| GType |
| object_manager_client_get_proxy_type (GDBusObjectManagerClient *manager G_GNUC_UNUSED, const gchar *object_path G_GNUC_UNUSED, const gchar *interface_name, gpointer user_data G_GNUC_UNUSED) |
| { |
| static gsize once_init_value = 0; |
| static GHashTable *lookup_hash; |
| GType ret; |
| |
| if (interface_name == NULL) |
| return TYPE_OBJECT_PROXY; |
| if (g_once_init_enter (&once_init_value)) |
| { |
| lookup_hash = g_hash_table_new (g_str_hash, g_str_equal); |
| g_hash_table_insert (lookup_hash, (gpointer) "org.openbmc.SensorValue", GSIZE_TO_POINTER (TYPE_SENSOR_VALUE_PROXY)); |
| g_hash_table_insert (lookup_hash, (gpointer) "org.openbmc.SensorThreshold", GSIZE_TO_POINTER (TYPE_SENSOR_THRESHOLD_PROXY)); |
| g_hash_table_insert (lookup_hash, (gpointer) "org.openbmc.SensorI2c", GSIZE_TO_POINTER (TYPE_SENSOR_I2C_PROXY)); |
| g_once_init_leave (&once_init_value, 1); |
| } |
| ret = (GType) GPOINTER_TO_SIZE (g_hash_table_lookup (lookup_hash, interface_name)); |
| if (ret == (GType) 0) |
| ret = G_TYPE_DBUS_PROXY; |
| return ret; |
| } |
| |
| /** |
| * object_manager_client_new: |
| * @connection: A #GDBusConnection. |
| * @flags: Flags from the #GDBusObjectManagerClientFlags enumeration. |
| * @name: (allow-none): A bus name (well-known or unique) or %NULL if @connection is not a message bus connection. |
| * @object_path: An object path. |
| * @cancellable: (allow-none): A #GCancellable or %NULL. |
| * @callback: A #GAsyncReadyCallback to call when the request is satisfied. |
| * @user_data: User data to pass to @callback. |
| * |
| * Asynchronously creates #GDBusObjectManagerClient using object_manager_client_get_proxy_type() as the #GDBusProxyTypeFunc. See g_dbus_object_manager_client_new() for more details. |
| * |
| * When the operation is finished, @callback will be invoked in the <link linkend="g-main-context-push-thread-default">thread-default main loop</link> of the thread you are calling this method from. |
| * You can then call object_manager_client_new_finish() to get the result of the operation. |
| * |
| * See object_manager_client_new_sync() for the synchronous, blocking version of this constructor. |
| */ |
| void |
| object_manager_client_new ( |
| GDBusConnection *connection, |
| GDBusObjectManagerClientFlags flags, |
| const gchar *name, |
| const gchar *object_path, |
| GCancellable *cancellable, |
| GAsyncReadyCallback callback, |
| gpointer user_data) |
| { |
| g_async_initable_new_async (TYPE_OBJECT_MANAGER_CLIENT, G_PRIORITY_DEFAULT, cancellable, callback, user_data, "flags", flags, "name", name, "connection", connection, "object-path", object_path, "get-proxy-type-func", object_manager_client_get_proxy_type, NULL); |
| } |
| |
| /** |
| * object_manager_client_new_finish: |
| * @res: The #GAsyncResult obtained from the #GAsyncReadyCallback passed to object_manager_client_new(). |
| * @error: Return location for error or %NULL |
| * |
| * Finishes an operation started with object_manager_client_new(). |
| * |
| * Returns: (transfer full) (type ObjectManagerClient): The constructed object manager client or %NULL if @error is set. |
| */ |
| GDBusObjectManager * |
| object_manager_client_new_finish ( |
| GAsyncResult *res, |
| GError **error) |
| { |
| GObject *ret; |
| GObject *source_object; |
| source_object = g_async_result_get_source_object (res); |
| ret = g_async_initable_new_finish (G_ASYNC_INITABLE (source_object), res, error); |
| g_object_unref (source_object); |
| if (ret != NULL) |
| return G_DBUS_OBJECT_MANAGER (ret); |
| else |
| return NULL; |
| } |
| |
| /** |
| * object_manager_client_new_sync: |
| * @connection: A #GDBusConnection. |
| * @flags: Flags from the #GDBusObjectManagerClientFlags enumeration. |
| * @name: (allow-none): A bus name (well-known or unique) or %NULL if @connection is not a message bus connection. |
| * @object_path: An object path. |
| * @cancellable: (allow-none): A #GCancellable or %NULL. |
| * @error: Return location for error or %NULL |
| * |
| * Synchronously creates #GDBusObjectManagerClient using object_manager_client_get_proxy_type() as the #GDBusProxyTypeFunc. See g_dbus_object_manager_client_new_sync() for more details. |
| * |
| * The calling thread is blocked until a reply is received. |
| * |
| * See object_manager_client_new() for the asynchronous version of this constructor. |
| * |
| * Returns: (transfer full) (type ObjectManagerClient): The constructed object manager client or %NULL if @error is set. |
| */ |
| GDBusObjectManager * |
| object_manager_client_new_sync ( |
| GDBusConnection *connection, |
| GDBusObjectManagerClientFlags flags, |
| const gchar *name, |
| const gchar *object_path, |
| GCancellable *cancellable, |
| GError **error) |
| { |
| GInitable *ret; |
| ret = g_initable_new (TYPE_OBJECT_MANAGER_CLIENT, cancellable, error, "flags", flags, "name", name, "connection", connection, "object-path", object_path, "get-proxy-type-func", object_manager_client_get_proxy_type, NULL); |
| if (ret != NULL) |
| return G_DBUS_OBJECT_MANAGER (ret); |
| else |
| return NULL; |
| } |
| |
| |
| /** |
| * object_manager_client_new_for_bus: |
| * @bus_type: A #GBusType. |
| * @flags: Flags from the #GDBusObjectManagerClientFlags enumeration. |
| * @name: A bus name (well-known or unique). |
| * @object_path: An object path. |
| * @cancellable: (allow-none): A #GCancellable or %NULL. |
| * @callback: A #GAsyncReadyCallback to call when the request is satisfied. |
| * @user_data: User data to pass to @callback. |
| * |
| * Like object_manager_client_new() but takes a #GBusType instead of a #GDBusConnection. |
| * |
| * When the operation is finished, @callback will be invoked in the <link linkend="g-main-context-push-thread-default">thread-default main loop</link> of the thread you are calling this method from. |
| * You can then call object_manager_client_new_for_bus_finish() to get the result of the operation. |
| * |
| * See object_manager_client_new_for_bus_sync() for the synchronous, blocking version of this constructor. |
| */ |
| void |
| object_manager_client_new_for_bus ( |
| GBusType bus_type, |
| GDBusObjectManagerClientFlags flags, |
| const gchar *name, |
| const gchar *object_path, |
| GCancellable *cancellable, |
| GAsyncReadyCallback callback, |
| gpointer user_data) |
| { |
| g_async_initable_new_async (TYPE_OBJECT_MANAGER_CLIENT, G_PRIORITY_DEFAULT, cancellable, callback, user_data, "flags", flags, "name", name, "bus-type", bus_type, "object-path", object_path, "get-proxy-type-func", object_manager_client_get_proxy_type, NULL); |
| } |
| |
| /** |
| * object_manager_client_new_for_bus_finish: |
| * @res: The #GAsyncResult obtained from the #GAsyncReadyCallback passed to object_manager_client_new_for_bus(). |
| * @error: Return location for error or %NULL |
| * |
| * Finishes an operation started with object_manager_client_new_for_bus(). |
| * |
| * Returns: (transfer full) (type ObjectManagerClient): The constructed object manager client or %NULL if @error is set. |
| */ |
| GDBusObjectManager * |
| object_manager_client_new_for_bus_finish ( |
| GAsyncResult *res, |
| GError **error) |
| { |
| GObject *ret; |
| GObject *source_object; |
| source_object = g_async_result_get_source_object (res); |
| ret = g_async_initable_new_finish (G_ASYNC_INITABLE (source_object), res, error); |
| g_object_unref (source_object); |
| if (ret != NULL) |
| return G_DBUS_OBJECT_MANAGER (ret); |
| else |
| return NULL; |
| } |
| |
| /** |
| * object_manager_client_new_for_bus_sync: |
| * @bus_type: A #GBusType. |
| * @flags: Flags from the #GDBusObjectManagerClientFlags enumeration. |
| * @name: A bus name (well-known or unique). |
| * @object_path: An object path. |
| * @cancellable: (allow-none): A #GCancellable or %NULL. |
| * @error: Return location for error or %NULL |
| * |
| * Like object_manager_client_new_sync() but takes a #GBusType instead of a #GDBusConnection. |
| * |
| * The calling thread is blocked until a reply is received. |
| * |
| * See object_manager_client_new_for_bus() for the asynchronous version of this constructor. |
| * |
| * Returns: (transfer full) (type ObjectManagerClient): The constructed object manager client or %NULL if @error is set. |
| */ |
| GDBusObjectManager * |
| object_manager_client_new_for_bus_sync ( |
| GBusType bus_type, |
| GDBusObjectManagerClientFlags flags, |
| const gchar *name, |
| const gchar *object_path, |
| GCancellable *cancellable, |
| GError **error) |
| { |
| GInitable *ret; |
| ret = g_initable_new (TYPE_OBJECT_MANAGER_CLIENT, cancellable, error, "flags", flags, "name", name, "bus-type", bus_type, "object-path", object_path, "get-proxy-type-func", object_manager_client_get_proxy_type, NULL); |
| if (ret != NULL) |
| return G_DBUS_OBJECT_MANAGER (ret); |
| else |
| return NULL; |
| } |
| |
| |