/* | |
* Generated by gdbus-codegen 2.40.2. DO NOT EDIT. | |
* | |
* The license of this code is the same as for the source it was derived from. | |
*/ | |
#ifdef HAVE_CONFIG_H | |
# include "config.h" | |
#endif | |
#include "interfaces/button.h" | |
#include <string.h> | |
#ifdef G_OS_UNIX | |
# include <gio/gunixfdlist.h> | |
#endif | |
typedef struct | |
{ | |
GDBusArgInfo parent_struct; | |
gboolean use_gvariant; | |
} _ExtendedGDBusArgInfo; | |
typedef struct | |
{ | |
GDBusMethodInfo parent_struct; | |
const gchar *signal_name; | |
gboolean pass_fdlist; | |
} _ExtendedGDBusMethodInfo; | |
typedef struct | |
{ | |
GDBusSignalInfo parent_struct; | |
const gchar *signal_name; | |
} _ExtendedGDBusSignalInfo; | |
typedef struct | |
{ | |
GDBusPropertyInfo parent_struct; | |
const gchar *hyphen_name; | |
gboolean use_gvariant; | |
} _ExtendedGDBusPropertyInfo; | |
typedef struct | |
{ | |
GDBusInterfaceInfo parent_struct; | |
const gchar *hyphen_name; | |
} _ExtendedGDBusInterfaceInfo; | |
typedef struct | |
{ | |
const _ExtendedGDBusPropertyInfo *info; | |
guint prop_id; | |
GValue orig_value; /* the value before the change */ | |
} ChangedProperty; | |
static void | |
_changed_property_free (ChangedProperty *data) | |
{ | |
g_value_unset (&data->orig_value); | |
g_free (data); | |
} | |
static gboolean | |
_g_strv_equal0 (gchar **a, gchar **b) | |
{ | |
gboolean ret = FALSE; | |
guint n; | |
if (a == NULL && b == NULL) | |
{ | |
ret = TRUE; | |
goto out; | |
} | |
if (a == NULL || b == NULL) | |
goto out; | |
if (g_strv_length (a) != g_strv_length (b)) | |
goto out; | |
for (n = 0; a[n] != NULL; n++) | |
if (g_strcmp0 (a[n], b[n]) != 0) | |
goto out; | |
ret = TRUE; | |
out: | |
return ret; | |
} | |
static gboolean | |
_g_variant_equal0 (GVariant *a, GVariant *b) | |
{ | |
gboolean ret = FALSE; | |
if (a == NULL && b == NULL) | |
{ | |
ret = TRUE; | |
goto out; | |
} | |
if (a == NULL || b == NULL) | |
goto out; | |
ret = g_variant_equal (a, b); | |
out: | |
return ret; | |
} | |
G_GNUC_UNUSED static gboolean | |
_g_value_equal (const GValue *a, const GValue *b) | |
{ | |
gboolean ret = FALSE; | |
g_assert (G_VALUE_TYPE (a) == G_VALUE_TYPE (b)); | |
switch (G_VALUE_TYPE (a)) | |
{ | |
case G_TYPE_BOOLEAN: | |
ret = (g_value_get_boolean (a) == g_value_get_boolean (b)); | |
break; | |
case G_TYPE_UCHAR: | |
ret = (g_value_get_uchar (a) == g_value_get_uchar (b)); | |
break; | |
case G_TYPE_INT: | |
ret = (g_value_get_int (a) == g_value_get_int (b)); | |
break; | |
case G_TYPE_UINT: | |
ret = (g_value_get_uint (a) == g_value_get_uint (b)); | |
break; | |
case G_TYPE_INT64: | |
ret = (g_value_get_int64 (a) == g_value_get_int64 (b)); | |
break; | |
case G_TYPE_UINT64: | |
ret = (g_value_get_uint64 (a) == g_value_get_uint64 (b)); | |
break; | |
case G_TYPE_DOUBLE: | |
{ | |
/* Avoid -Wfloat-equal warnings by doing a direct bit compare */ | |
gdouble da = g_value_get_double (a); | |
gdouble db = g_value_get_double (b); | |
ret = memcmp (&da, &db, sizeof (gdouble)) == 0; | |
} | |
break; | |
case G_TYPE_STRING: | |
ret = (g_strcmp0 (g_value_get_string (a), g_value_get_string (b)) == 0); | |
break; | |
case G_TYPE_VARIANT: | |
ret = _g_variant_equal0 (g_value_get_variant (a), g_value_get_variant (b)); | |
break; | |
default: | |
if (G_VALUE_TYPE (a) == G_TYPE_STRV) | |
ret = _g_strv_equal0 (g_value_get_boxed (a), g_value_get_boxed (b)); | |
else | |
g_critical ("_g_value_equal() does not handle type %s", g_type_name (G_VALUE_TYPE (a))); | |
break; | |
} | |
return ret; | |
} | |
/* ------------------------------------------------------------------------ | |
* Code for interface org.openbmc.Button | |
* ------------------------------------------------------------------------ | |
*/ | |
/** | |
* SECTION:Button | |
* @title: Button | |
* @short_description: Generated C code for the org.openbmc.Button D-Bus interface | |
* | |
* This section contains code for working with the <link linkend="gdbus-interface-org-openbmc-Button.top_of_page">org.openbmc.Button</link> D-Bus interface in C. | |
*/ | |
/* ---- Introspection data for org.openbmc.Button ---- */ | |
static const _ExtendedGDBusArgInfo _button_method_info_is_on_OUT_ARG_state = | |
{ | |
{ | |
-1, | |
(gchar *) "state", | |
(gchar *) "b", | |
NULL | |
}, | |
FALSE | |
}; | |
static const _ExtendedGDBusArgInfo * const _button_method_info_is_on_OUT_ARG_pointers[] = | |
{ | |
&_button_method_info_is_on_OUT_ARG_state, | |
NULL | |
}; | |
static const _ExtendedGDBusMethodInfo _button_method_info_is_on = | |
{ | |
{ | |
-1, | |
(gchar *) "isOn", | |
NULL, | |
(GDBusArgInfo **) &_button_method_info_is_on_OUT_ARG_pointers, | |
NULL | |
}, | |
"handle-is-on", | |
FALSE | |
}; | |
static const _ExtendedGDBusMethodInfo _button_method_info_sim_button_press = | |
{ | |
{ | |
-1, | |
(gchar *) "simButtonPress", | |
NULL, | |
NULL, | |
NULL | |
}, | |
"handle-sim-button-press", | |
FALSE | |
}; | |
static const _ExtendedGDBusMethodInfo _button_method_info_sim_button_long_press = | |
{ | |
{ | |
-1, | |
(gchar *) "simButtonLongPress", | |
NULL, | |
NULL, | |
NULL | |
}, | |
"handle-sim-button-long-press", | |
FALSE | |
}; | |
static const _ExtendedGDBusMethodInfo * const _button_method_info_pointers[] = | |
{ | |
&_button_method_info_is_on, | |
&_button_method_info_sim_button_press, | |
&_button_method_info_sim_button_long_press, | |
NULL | |
}; | |
static const _ExtendedGDBusSignalInfo _button_signal_info_button_release = | |
{ | |
{ | |
-1, | |
(gchar *) "ButtonRelease", | |
NULL, | |
NULL | |
}, | |
"button-release" | |
}; | |
static const _ExtendedGDBusSignalInfo _button_signal_info_button_pressed = | |
{ | |
{ | |
-1, | |
(gchar *) "ButtonPressed", | |
NULL, | |
NULL | |
}, | |
"button-pressed" | |
}; | |
static const _ExtendedGDBusSignalInfo _button_signal_info_button_pressed_long = | |
{ | |
{ | |
-1, | |
(gchar *) "ButtonPressedLong", | |
NULL, | |
NULL | |
}, | |
"button-pressed-long" | |
}; | |
static const _ExtendedGDBusSignalInfo * const _button_signal_info_pointers[] = | |
{ | |
&_button_signal_info_button_release, | |
&_button_signal_info_button_pressed, | |
&_button_signal_info_button_pressed_long, | |
NULL | |
}; | |
static const _ExtendedGDBusPropertyInfo _button_property_info_state = | |
{ | |
{ | |
-1, | |
(gchar *) "state", | |
(gchar *) "b", | |
G_DBUS_PROPERTY_INFO_FLAGS_READABLE, | |
NULL | |
}, | |
"state", | |
FALSE | |
}; | |
static const _ExtendedGDBusPropertyInfo * const _button_property_info_pointers[] = | |
{ | |
&_button_property_info_state, | |
NULL | |
}; | |
static const _ExtendedGDBusInterfaceInfo _button_interface_info = | |
{ | |
{ | |
-1, | |
(gchar *) "org.openbmc.Button", | |
(GDBusMethodInfo **) &_button_method_info_pointers, | |
(GDBusSignalInfo **) &_button_signal_info_pointers, | |
(GDBusPropertyInfo **) &_button_property_info_pointers, | |
NULL | |
}, | |
"button", | |
}; | |
/** | |
* button_interface_info: | |
* | |
* Gets a machine-readable description of the <link linkend="gdbus-interface-org-openbmc-Button.top_of_page">org.openbmc.Button</link> D-Bus interface. | |
* | |
* Returns: (transfer none): A #GDBusInterfaceInfo. Do not free. | |
*/ | |
GDBusInterfaceInfo * | |
button_interface_info (void) | |
{ | |
return (GDBusInterfaceInfo *) &_button_interface_info.parent_struct; | |
} | |
/** | |
* button_override_properties: | |
* @klass: The class structure for a #GObject<!-- -->-derived class. | |
* @property_id_begin: The property id to assign to the first overridden property. | |
* | |
* Overrides all #GObject properties in the #Button interface for a concrete class. | |
* The properties are overridden in the order they are defined. | |
* | |
* Returns: The last property id. | |
*/ | |
guint | |
button_override_properties (GObjectClass *klass, guint property_id_begin) | |
{ | |
g_object_class_override_property (klass, property_id_begin++, "state"); | |
return property_id_begin - 1; | |
} | |
/** | |
* Button: | |
* | |
* Abstract interface type for the D-Bus interface <link linkend="gdbus-interface-org-openbmc-Button.top_of_page">org.openbmc.Button</link>. | |
*/ | |
/** | |
* ButtonIface: | |
* @parent_iface: The parent interface. | |
* @handle_is_on: Handler for the #Button::handle-is-on signal. | |
* @handle_sim_button_long_press: Handler for the #Button::handle-sim-button-long-press signal. | |
* @handle_sim_button_press: Handler for the #Button::handle-sim-button-press signal. | |
* @get_state: Getter for the #Button:state property. | |
* @button_pressed: Handler for the #Button::button-pressed signal. | |
* @button_pressed_long: Handler for the #Button::button-pressed-long signal. | |
* @button_release: Handler for the #Button::button-release signal. | |
* | |
* Virtual table for the D-Bus interface <link linkend="gdbus-interface-org-openbmc-Button.top_of_page">org.openbmc.Button</link>. | |
*/ | |
typedef ButtonIface ButtonInterface; | |
G_DEFINE_INTERFACE (Button, button, G_TYPE_OBJECT); | |
static void | |
button_default_init (ButtonIface *iface) | |
{ | |
/* GObject signals for incoming D-Bus method calls: */ | |
/** | |
* Button::handle-is-on: | |
* @object: A #Button. | |
* @invocation: A #GDBusMethodInvocation. | |
* | |
* Signal emitted when a remote caller is invoking the <link linkend="gdbus-method-org-openbmc-Button.isOn">isOn()</link> D-Bus method. | |
* | |
* If a signal handler returns %TRUE, it means the signal handler will handle the invocation (e.g. take a reference to @invocation and eventually call button_complete_is_on() or e.g. g_dbus_method_invocation_return_error() on it) and no order signal handlers will run. If no signal handler handles the invocation, the %G_DBUS_ERROR_UNKNOWN_METHOD error is returned. | |
* | |
* Returns: %TRUE if the invocation was handled, %FALSE to let other signal handlers run. | |
*/ | |
g_signal_new ("handle-is-on", | |
G_TYPE_FROM_INTERFACE (iface), | |
G_SIGNAL_RUN_LAST, | |
G_STRUCT_OFFSET (ButtonIface, handle_is_on), | |
g_signal_accumulator_true_handled, | |
NULL, | |
g_cclosure_marshal_generic, | |
G_TYPE_BOOLEAN, | |
1, | |
G_TYPE_DBUS_METHOD_INVOCATION); | |
/** | |
* Button::handle-sim-button-press: | |
* @object: A #Button. | |
* @invocation: A #GDBusMethodInvocation. | |
* | |
* Signal emitted when a remote caller is invoking the <link linkend="gdbus-method-org-openbmc-Button.simButtonPress">simButtonPress()</link> D-Bus method. | |
* | |
* If a signal handler returns %TRUE, it means the signal handler will handle the invocation (e.g. take a reference to @invocation and eventually call button_complete_sim_button_press() or e.g. g_dbus_method_invocation_return_error() on it) and no order signal handlers will run. If no signal handler handles the invocation, the %G_DBUS_ERROR_UNKNOWN_METHOD error is returned. | |
* | |
* Returns: %TRUE if the invocation was handled, %FALSE to let other signal handlers run. | |
*/ | |
g_signal_new ("handle-sim-button-press", | |
G_TYPE_FROM_INTERFACE (iface), | |
G_SIGNAL_RUN_LAST, | |
G_STRUCT_OFFSET (ButtonIface, handle_sim_button_press), | |
g_signal_accumulator_true_handled, | |
NULL, | |
g_cclosure_marshal_generic, | |
G_TYPE_BOOLEAN, | |
1, | |
G_TYPE_DBUS_METHOD_INVOCATION); | |
/** | |
* Button::handle-sim-button-long-press: | |
* @object: A #Button. | |
* @invocation: A #GDBusMethodInvocation. | |
* | |
* Signal emitted when a remote caller is invoking the <link linkend="gdbus-method-org-openbmc-Button.simButtonLongPress">simButtonLongPress()</link> D-Bus method. | |
* | |
* If a signal handler returns %TRUE, it means the signal handler will handle the invocation (e.g. take a reference to @invocation and eventually call button_complete_sim_button_long_press() or e.g. g_dbus_method_invocation_return_error() on it) and no order signal handlers will run. If no signal handler handles the invocation, the %G_DBUS_ERROR_UNKNOWN_METHOD error is returned. | |
* | |
* Returns: %TRUE if the invocation was handled, %FALSE to let other signal handlers run. | |
*/ | |
g_signal_new ("handle-sim-button-long-press", | |
G_TYPE_FROM_INTERFACE (iface), | |
G_SIGNAL_RUN_LAST, | |
G_STRUCT_OFFSET (ButtonIface, handle_sim_button_long_press), | |
g_signal_accumulator_true_handled, | |
NULL, | |
g_cclosure_marshal_generic, | |
G_TYPE_BOOLEAN, | |
1, | |
G_TYPE_DBUS_METHOD_INVOCATION); | |
/* GObject signals for received D-Bus signals: */ | |
/** | |
* Button::button-release: | |
* @object: A #Button. | |
* | |
* On the client-side, this signal is emitted whenever the D-Bus signal <link linkend="gdbus-signal-org-openbmc-Button.ButtonRelease">"ButtonRelease"</link> is received. | |
* | |
* On the service-side, this signal can be used with e.g. g_signal_emit_by_name() to make the object emit the D-Bus signal. | |
*/ | |
g_signal_new ("button-release", | |
G_TYPE_FROM_INTERFACE (iface), | |
G_SIGNAL_RUN_LAST, | |
G_STRUCT_OFFSET (ButtonIface, button_release), | |
NULL, | |
NULL, | |
g_cclosure_marshal_generic, | |
G_TYPE_NONE, | |
0); | |
/** | |
* Button::button-pressed: | |
* @object: A #Button. | |
* | |
* On the client-side, this signal is emitted whenever the D-Bus signal <link linkend="gdbus-signal-org-openbmc-Button.ButtonPressed">"ButtonPressed"</link> is received. | |
* | |
* On the service-side, this signal can be used with e.g. g_signal_emit_by_name() to make the object emit the D-Bus signal. | |
*/ | |
g_signal_new ("button-pressed", | |
G_TYPE_FROM_INTERFACE (iface), | |
G_SIGNAL_RUN_LAST, | |
G_STRUCT_OFFSET (ButtonIface, button_pressed), | |
NULL, | |
NULL, | |
g_cclosure_marshal_generic, | |
G_TYPE_NONE, | |
0); | |
/** | |
* Button::button-pressed-long: | |
* @object: A #Button. | |
* | |
* On the client-side, this signal is emitted whenever the D-Bus signal <link linkend="gdbus-signal-org-openbmc-Button.ButtonPressedLong">"ButtonPressedLong"</link> is received. | |
* | |
* On the service-side, this signal can be used with e.g. g_signal_emit_by_name() to make the object emit the D-Bus signal. | |
*/ | |
g_signal_new ("button-pressed-long", | |
G_TYPE_FROM_INTERFACE (iface), | |
G_SIGNAL_RUN_LAST, | |
G_STRUCT_OFFSET (ButtonIface, button_pressed_long), | |
NULL, | |
NULL, | |
g_cclosure_marshal_generic, | |
G_TYPE_NONE, | |
0); | |
/* GObject properties for D-Bus properties: */ | |
/** | |
* Button:state: | |
* | |
* Represents the D-Bus property <link linkend="gdbus-property-org-openbmc-Button.state">"state"</link>. | |
* | |
* Since the D-Bus property for this #GObject property is readable but not writable, it is meaningful to read from it on both the client- and service-side. It is only meaningful, however, to write to it on the service-side. | |
*/ | |
g_object_interface_install_property (iface, | |
g_param_spec_boolean ("state", "state", "state", FALSE, G_PARAM_READWRITE | G_PARAM_STATIC_STRINGS)); | |
} | |
/** | |
* button_get_state: (skip) | |
* @object: A #Button. | |
* | |
* Gets the value of the <link linkend="gdbus-property-org-openbmc-Button.state">"state"</link> D-Bus property. | |
* | |
* Since this D-Bus property is readable, it is meaningful to use this function on both the client- and service-side. | |
* | |
* Returns: The property value. | |
*/ | |
gboolean | |
button_get_state (Button *object) | |
{ | |
return BUTTON_GET_IFACE (object)->get_state (object); | |
} | |
/** | |
* button_set_state: (skip) | |
* @object: A #Button. | |
* @value: The value to set. | |
* | |
* Sets the <link linkend="gdbus-property-org-openbmc-Button.state">"state"</link> D-Bus property to @value. | |
* | |
* Since this D-Bus property is not writable, it is only meaningful to use this function on the service-side. | |
*/ | |
void | |
button_set_state (Button *object, gboolean value) | |
{ | |
g_object_set (G_OBJECT (object), "state", value, NULL); | |
} | |
/** | |
* button_emit_button_release: | |
* @object: A #Button. | |
* | |
* Emits the <link linkend="gdbus-signal-org-openbmc-Button.ButtonRelease">"ButtonRelease"</link> D-Bus signal. | |
*/ | |
void | |
button_emit_button_release ( | |
Button *object) | |
{ | |
g_signal_emit_by_name (object, "button-release"); | |
} | |
/** | |
* button_emit_button_pressed: | |
* @object: A #Button. | |
* | |
* Emits the <link linkend="gdbus-signal-org-openbmc-Button.ButtonPressed">"ButtonPressed"</link> D-Bus signal. | |
*/ | |
void | |
button_emit_button_pressed ( | |
Button *object) | |
{ | |
g_signal_emit_by_name (object, "button-pressed"); | |
} | |
/** | |
* button_emit_button_pressed_long: | |
* @object: A #Button. | |
* | |
* Emits the <link linkend="gdbus-signal-org-openbmc-Button.ButtonPressedLong">"ButtonPressedLong"</link> D-Bus signal. | |
*/ | |
void | |
button_emit_button_pressed_long ( | |
Button *object) | |
{ | |
g_signal_emit_by_name (object, "button-pressed-long"); | |
} | |
/** | |
* button_call_is_on: | |
* @proxy: A #ButtonProxy. | |
* @cancellable: (allow-none): A #GCancellable or %NULL. | |
* @callback: A #GAsyncReadyCallback to call when the request is satisfied or %NULL. | |
* @user_data: User data to pass to @callback. | |
* | |
* Asynchronously invokes the <link linkend="gdbus-method-org-openbmc-Button.isOn">isOn()</link> D-Bus method on @proxy. | |
* When the operation is finished, @callback will be invoked in the <link linkend="g-main-context-push-thread-default">thread-default main loop</link> of the thread you are calling this method from. | |
* You can then call button_call_is_on_finish() to get the result of the operation. | |
* | |
* See button_call_is_on_sync() for the synchronous, blocking version of this method. | |
*/ | |
void | |
button_call_is_on ( | |
Button *proxy, | |
GCancellable *cancellable, | |
GAsyncReadyCallback callback, | |
gpointer user_data) | |
{ | |
g_dbus_proxy_call (G_DBUS_PROXY (proxy), | |
"isOn", | |
g_variant_new ("()"), | |
G_DBUS_CALL_FLAGS_NONE, | |
-1, | |
cancellable, | |
callback, | |
user_data); | |
} | |
/** | |
* button_call_is_on_finish: | |
* @proxy: A #ButtonProxy. | |
* @out_state: (out): Return location for return parameter or %NULL to ignore. | |
* @res: The #GAsyncResult obtained from the #GAsyncReadyCallback passed to button_call_is_on(). | |
* @error: Return location for error or %NULL. | |
* | |
* Finishes an operation started with button_call_is_on(). | |
* | |
* Returns: (skip): %TRUE if the call succeded, %FALSE if @error is set. | |
*/ | |
gboolean | |
button_call_is_on_finish ( | |
Button *proxy, | |
gboolean *out_state, | |
GAsyncResult *res, | |
GError **error) | |
{ | |
GVariant *_ret; | |
_ret = g_dbus_proxy_call_finish (G_DBUS_PROXY (proxy), res, error); | |
if (_ret == NULL) | |
goto _out; | |
g_variant_get (_ret, | |
"(b)", | |
out_state); | |
g_variant_unref (_ret); | |
_out: | |
return _ret != NULL; | |
} | |
/** | |
* button_call_is_on_sync: | |
* @proxy: A #ButtonProxy. | |
* @out_state: (out): Return location for return parameter or %NULL to ignore. | |
* @cancellable: (allow-none): A #GCancellable or %NULL. | |
* @error: Return location for error or %NULL. | |
* | |
* Synchronously invokes the <link linkend="gdbus-method-org-openbmc-Button.isOn">isOn()</link> D-Bus method on @proxy. The calling thread is blocked until a reply is received. | |
* | |
* See button_call_is_on() for the asynchronous version of this method. | |
* | |
* Returns: (skip): %TRUE if the call succeded, %FALSE if @error is set. | |
*/ | |
gboolean | |
button_call_is_on_sync ( | |
Button *proxy, | |
gboolean *out_state, | |
GCancellable *cancellable, | |
GError **error) | |
{ | |
GVariant *_ret; | |
_ret = g_dbus_proxy_call_sync (G_DBUS_PROXY (proxy), | |
"isOn", | |
g_variant_new ("()"), | |
G_DBUS_CALL_FLAGS_NONE, | |
-1, | |
cancellable, | |
error); | |
if (_ret == NULL) | |
goto _out; | |
g_variant_get (_ret, | |
"(b)", | |
out_state); | |
g_variant_unref (_ret); | |
_out: | |
return _ret != NULL; | |
} | |
/** | |
* button_call_sim_button_press: | |
* @proxy: A #ButtonProxy. | |
* @cancellable: (allow-none): A #GCancellable or %NULL. | |
* @callback: A #GAsyncReadyCallback to call when the request is satisfied or %NULL. | |
* @user_data: User data to pass to @callback. | |
* | |
* Asynchronously invokes the <link linkend="gdbus-method-org-openbmc-Button.simButtonPress">simButtonPress()</link> D-Bus method on @proxy. | |
* When the operation is finished, @callback will be invoked in the <link linkend="g-main-context-push-thread-default">thread-default main loop</link> of the thread you are calling this method from. | |
* You can then call button_call_sim_button_press_finish() to get the result of the operation. | |
* | |
* See button_call_sim_button_press_sync() for the synchronous, blocking version of this method. | |
*/ | |
void | |
button_call_sim_button_press ( | |
Button *proxy, | |
GCancellable *cancellable, | |
GAsyncReadyCallback callback, | |
gpointer user_data) | |
{ | |
g_dbus_proxy_call (G_DBUS_PROXY (proxy), | |
"simButtonPress", | |
g_variant_new ("()"), | |
G_DBUS_CALL_FLAGS_NONE, | |
-1, | |
cancellable, | |
callback, | |
user_data); | |
} | |
/** | |
* button_call_sim_button_press_finish: | |
* @proxy: A #ButtonProxy. | |
* @res: The #GAsyncResult obtained from the #GAsyncReadyCallback passed to button_call_sim_button_press(). | |
* @error: Return location for error or %NULL. | |
* | |
* Finishes an operation started with button_call_sim_button_press(). | |
* | |
* Returns: (skip): %TRUE if the call succeded, %FALSE if @error is set. | |
*/ | |
gboolean | |
button_call_sim_button_press_finish ( | |
Button *proxy, | |
GAsyncResult *res, | |
GError **error) | |
{ | |
GVariant *_ret; | |
_ret = g_dbus_proxy_call_finish (G_DBUS_PROXY (proxy), res, error); | |
if (_ret == NULL) | |
goto _out; | |
g_variant_get (_ret, | |
"()"); | |
g_variant_unref (_ret); | |
_out: | |
return _ret != NULL; | |
} | |
/** | |
* button_call_sim_button_press_sync: | |
* @proxy: A #ButtonProxy. | |
* @cancellable: (allow-none): A #GCancellable or %NULL. | |
* @error: Return location for error or %NULL. | |
* | |
* Synchronously invokes the <link linkend="gdbus-method-org-openbmc-Button.simButtonPress">simButtonPress()</link> D-Bus method on @proxy. The calling thread is blocked until a reply is received. | |
* | |
* See button_call_sim_button_press() for the asynchronous version of this method. | |
* | |
* Returns: (skip): %TRUE if the call succeded, %FALSE if @error is set. | |
*/ | |
gboolean | |
button_call_sim_button_press_sync ( | |
Button *proxy, | |
GCancellable *cancellable, | |
GError **error) | |
{ | |
GVariant *_ret; | |
_ret = g_dbus_proxy_call_sync (G_DBUS_PROXY (proxy), | |
"simButtonPress", | |
g_variant_new ("()"), | |
G_DBUS_CALL_FLAGS_NONE, | |
-1, | |
cancellable, | |
error); | |
if (_ret == NULL) | |
goto _out; | |
g_variant_get (_ret, | |
"()"); | |
g_variant_unref (_ret); | |
_out: | |
return _ret != NULL; | |
} | |
/** | |
* button_call_sim_button_long_press: | |
* @proxy: A #ButtonProxy. | |
* @cancellable: (allow-none): A #GCancellable or %NULL. | |
* @callback: A #GAsyncReadyCallback to call when the request is satisfied or %NULL. | |
* @user_data: User data to pass to @callback. | |
* | |
* Asynchronously invokes the <link linkend="gdbus-method-org-openbmc-Button.simButtonLongPress">simButtonLongPress()</link> D-Bus method on @proxy. | |
* When the operation is finished, @callback will be invoked in the <link linkend="g-main-context-push-thread-default">thread-default main loop</link> of the thread you are calling this method from. | |
* You can then call button_call_sim_button_long_press_finish() to get the result of the operation. | |
* | |
* See button_call_sim_button_long_press_sync() for the synchronous, blocking version of this method. | |
*/ | |
void | |
button_call_sim_button_long_press ( | |
Button *proxy, | |
GCancellable *cancellable, | |
GAsyncReadyCallback callback, | |
gpointer user_data) | |
{ | |
g_dbus_proxy_call (G_DBUS_PROXY (proxy), | |
"simButtonLongPress", | |
g_variant_new ("()"), | |
G_DBUS_CALL_FLAGS_NONE, | |
-1, | |
cancellable, | |
callback, | |
user_data); | |
} | |
/** | |
* button_call_sim_button_long_press_finish: | |
* @proxy: A #ButtonProxy. | |
* @res: The #GAsyncResult obtained from the #GAsyncReadyCallback passed to button_call_sim_button_long_press(). | |
* @error: Return location for error or %NULL. | |
* | |
* Finishes an operation started with button_call_sim_button_long_press(). | |
* | |
* Returns: (skip): %TRUE if the call succeded, %FALSE if @error is set. | |
*/ | |
gboolean | |
button_call_sim_button_long_press_finish ( | |
Button *proxy, | |
GAsyncResult *res, | |
GError **error) | |
{ | |
GVariant *_ret; | |
_ret = g_dbus_proxy_call_finish (G_DBUS_PROXY (proxy), res, error); | |
if (_ret == NULL) | |
goto _out; | |
g_variant_get (_ret, | |
"()"); | |
g_variant_unref (_ret); | |
_out: | |
return _ret != NULL; | |
} | |
/** | |
* button_call_sim_button_long_press_sync: | |
* @proxy: A #ButtonProxy. | |
* @cancellable: (allow-none): A #GCancellable or %NULL. | |
* @error: Return location for error or %NULL. | |
* | |
* Synchronously invokes the <link linkend="gdbus-method-org-openbmc-Button.simButtonLongPress">simButtonLongPress()</link> D-Bus method on @proxy. The calling thread is blocked until a reply is received. | |
* | |
* See button_call_sim_button_long_press() for the asynchronous version of this method. | |
* | |
* Returns: (skip): %TRUE if the call succeded, %FALSE if @error is set. | |
*/ | |
gboolean | |
button_call_sim_button_long_press_sync ( | |
Button *proxy, | |
GCancellable *cancellable, | |
GError **error) | |
{ | |
GVariant *_ret; | |
_ret = g_dbus_proxy_call_sync (G_DBUS_PROXY (proxy), | |
"simButtonLongPress", | |
g_variant_new ("()"), | |
G_DBUS_CALL_FLAGS_NONE, | |
-1, | |
cancellable, | |
error); | |
if (_ret == NULL) | |
goto _out; | |
g_variant_get (_ret, | |
"()"); | |
g_variant_unref (_ret); | |
_out: | |
return _ret != NULL; | |
} | |
/** | |
* button_complete_is_on: | |
* @object: A #Button. | |
* @invocation: (transfer full): A #GDBusMethodInvocation. | |
* @state: Parameter to return. | |
* | |
* Helper function used in service implementations to finish handling invocations of the <link linkend="gdbus-method-org-openbmc-Button.isOn">isOn()</link> D-Bus method. If you instead want to finish handling an invocation by returning an error, use g_dbus_method_invocation_return_error() or similar. | |
* | |
* This method will free @invocation, you cannot use it afterwards. | |
*/ | |
void | |
button_complete_is_on ( | |
Button *object, | |
GDBusMethodInvocation *invocation, | |
gboolean state) | |
{ | |
g_dbus_method_invocation_return_value (invocation, | |
g_variant_new ("(b)", | |
state)); | |
} | |
/** | |
* button_complete_sim_button_press: | |
* @object: A #Button. | |
* @invocation: (transfer full): A #GDBusMethodInvocation. | |
* | |
* Helper function used in service implementations to finish handling invocations of the <link linkend="gdbus-method-org-openbmc-Button.simButtonPress">simButtonPress()</link> D-Bus method. If you instead want to finish handling an invocation by returning an error, use g_dbus_method_invocation_return_error() or similar. | |
* | |
* This method will free @invocation, you cannot use it afterwards. | |
*/ | |
void | |
button_complete_sim_button_press ( | |
Button *object, | |
GDBusMethodInvocation *invocation) | |
{ | |
g_dbus_method_invocation_return_value (invocation, | |
g_variant_new ("()")); | |
} | |
/** | |
* button_complete_sim_button_long_press: | |
* @object: A #Button. | |
* @invocation: (transfer full): A #GDBusMethodInvocation. | |
* | |
* Helper function used in service implementations to finish handling invocations of the <link linkend="gdbus-method-org-openbmc-Button.simButtonLongPress">simButtonLongPress()</link> D-Bus method. If you instead want to finish handling an invocation by returning an error, use g_dbus_method_invocation_return_error() or similar. | |
* | |
* This method will free @invocation, you cannot use it afterwards. | |
*/ | |
void | |
button_complete_sim_button_long_press ( | |
Button *object, | |
GDBusMethodInvocation *invocation) | |
{ | |
g_dbus_method_invocation_return_value (invocation, | |
g_variant_new ("()")); | |
} | |
/* ------------------------------------------------------------------------ */ | |
/** | |
* ButtonProxy: | |
* | |
* The #ButtonProxy structure contains only private data and should only be accessed using the provided API. | |
*/ | |
/** | |
* ButtonProxyClass: | |
* @parent_class: The parent class. | |
* | |
* Class structure for #ButtonProxy. | |
*/ | |
struct _ButtonProxyPrivate | |
{ | |
GData *qdata; | |
}; | |
static void button_proxy_iface_init (ButtonIface *iface); | |
#if GLIB_VERSION_MAX_ALLOWED >= GLIB_VERSION_2_38 | |
G_DEFINE_TYPE_WITH_CODE (ButtonProxy, button_proxy, G_TYPE_DBUS_PROXY, | |
G_ADD_PRIVATE (ButtonProxy) | |
G_IMPLEMENT_INTERFACE (TYPE_BUTTON, button_proxy_iface_init)); | |
#else | |
G_DEFINE_TYPE_WITH_CODE (ButtonProxy, button_proxy, G_TYPE_DBUS_PROXY, | |
G_IMPLEMENT_INTERFACE (TYPE_BUTTON, button_proxy_iface_init)); | |
#endif | |
static void | |
button_proxy_finalize (GObject *object) | |
{ | |
ButtonProxy *proxy = BUTTON_PROXY (object); | |
g_datalist_clear (&proxy->priv->qdata); | |
G_OBJECT_CLASS (button_proxy_parent_class)->finalize (object); | |
} | |
static void | |
button_proxy_get_property (GObject *object, | |
guint prop_id, | |
GValue *value, | |
GParamSpec *pspec G_GNUC_UNUSED) | |
{ | |
const _ExtendedGDBusPropertyInfo *info; | |
GVariant *variant; | |
g_assert (prop_id != 0 && prop_id - 1 < 1); | |
info = _button_property_info_pointers[prop_id - 1]; | |
variant = g_dbus_proxy_get_cached_property (G_DBUS_PROXY (object), info->parent_struct.name); | |
if (info->use_gvariant) | |
{ | |
g_value_set_variant (value, variant); | |
} | |
else | |
{ | |
if (variant != NULL) | |
g_dbus_gvariant_to_gvalue (variant, value); | |
} | |
if (variant != NULL) | |
g_variant_unref (variant); | |
} | |
static void | |
button_proxy_set_property_cb (GDBusProxy *proxy, | |
GAsyncResult *res, | |
gpointer user_data) | |
{ | |
const _ExtendedGDBusPropertyInfo *info = user_data; | |
GError *error; | |
GVariant *_ret; | |
error = NULL; | |
_ret = g_dbus_proxy_call_finish (proxy, res, &error); | |
if (!_ret) | |
{ | |
g_warning ("Error setting property '%s' on interface org.openbmc.Button: %s (%s, %d)", | |
info->parent_struct.name, | |
error->message, g_quark_to_string (error->domain), error->code); | |
g_error_free (error); | |
} | |
else | |
{ | |
g_variant_unref (_ret); | |
} | |
} | |
static void | |
button_proxy_set_property (GObject *object, | |
guint prop_id, | |
const GValue *value, | |
GParamSpec *pspec G_GNUC_UNUSED) | |
{ | |
const _ExtendedGDBusPropertyInfo *info; | |
GVariant *variant; | |
g_assert (prop_id != 0 && prop_id - 1 < 1); | |
info = _button_property_info_pointers[prop_id - 1]; | |
variant = g_dbus_gvalue_to_gvariant (value, G_VARIANT_TYPE (info->parent_struct.signature)); | |
g_dbus_proxy_call (G_DBUS_PROXY (object), | |
"org.freedesktop.DBus.Properties.Set", | |
g_variant_new ("(ssv)", "org.openbmc.Button", info->parent_struct.name, variant), | |
G_DBUS_CALL_FLAGS_NONE, | |
-1, | |
NULL, (GAsyncReadyCallback) button_proxy_set_property_cb, (GDBusPropertyInfo *) &info->parent_struct); | |
g_variant_unref (variant); | |
} | |
static void | |
button_proxy_g_signal (GDBusProxy *proxy, | |
const gchar *sender_name G_GNUC_UNUSED, | |
const gchar *signal_name, | |
GVariant *parameters) | |
{ | |
_ExtendedGDBusSignalInfo *info; | |
GVariantIter iter; | |
GVariant *child; | |
GValue *paramv; | |
guint num_params; | |
guint n; | |
guint signal_id; | |
info = (_ExtendedGDBusSignalInfo *) g_dbus_interface_info_lookup_signal ((GDBusInterfaceInfo *) &_button_interface_info.parent_struct, signal_name); | |
if (info == NULL) | |
return; | |
num_params = g_variant_n_children (parameters); | |
paramv = g_new0 (GValue, num_params + 1); | |
g_value_init (¶mv[0], TYPE_BUTTON); | |
g_value_set_object (¶mv[0], proxy); | |
g_variant_iter_init (&iter, parameters); | |
n = 1; | |
while ((child = g_variant_iter_next_value (&iter)) != NULL) | |
{ | |
_ExtendedGDBusArgInfo *arg_info = (_ExtendedGDBusArgInfo *) info->parent_struct.args[n - 1]; | |
if (arg_info->use_gvariant) | |
{ | |
g_value_init (¶mv[n], G_TYPE_VARIANT); | |
g_value_set_variant (¶mv[n], child); | |
n++; | |
} | |
else | |
g_dbus_gvariant_to_gvalue (child, ¶mv[n++]); | |
g_variant_unref (child); | |
} | |
signal_id = g_signal_lookup (info->signal_name, TYPE_BUTTON); | |
g_signal_emitv (paramv, signal_id, 0, NULL); | |
for (n = 0; n < num_params + 1; n++) | |
g_value_unset (¶mv[n]); | |
g_free (paramv); | |
} | |
static void | |
button_proxy_g_properties_changed (GDBusProxy *_proxy, | |
GVariant *changed_properties, | |
const gchar *const *invalidated_properties) | |
{ | |
ButtonProxy *proxy = BUTTON_PROXY (_proxy); | |
guint n; | |
const gchar *key; | |
GVariantIter *iter; | |
_ExtendedGDBusPropertyInfo *info; | |
g_variant_get (changed_properties, "a{sv}", &iter); | |
while (g_variant_iter_next (iter, "{&sv}", &key, NULL)) | |
{ | |
info = (_ExtendedGDBusPropertyInfo *) g_dbus_interface_info_lookup_property ((GDBusInterfaceInfo *) &_button_interface_info.parent_struct, key); | |
g_datalist_remove_data (&proxy->priv->qdata, key); | |
if (info != NULL) | |
g_object_notify (G_OBJECT (proxy), info->hyphen_name); | |
} | |
g_variant_iter_free (iter); | |
for (n = 0; invalidated_properties[n] != NULL; n++) | |
{ | |
info = (_ExtendedGDBusPropertyInfo *) g_dbus_interface_info_lookup_property ((GDBusInterfaceInfo *) &_button_interface_info.parent_struct, invalidated_properties[n]); | |
g_datalist_remove_data (&proxy->priv->qdata, invalidated_properties[n]); | |
if (info != NULL) | |
g_object_notify (G_OBJECT (proxy), info->hyphen_name); | |
} | |
} | |
static gboolean | |
button_proxy_get_state (Button *object) | |
{ | |
ButtonProxy *proxy = BUTTON_PROXY (object); | |
GVariant *variant; | |
gboolean value = 0; | |
variant = g_dbus_proxy_get_cached_property (G_DBUS_PROXY (proxy), "state"); | |
if (variant != NULL) | |
{ | |
value = g_variant_get_boolean (variant); | |
g_variant_unref (variant); | |
} | |
return value; | |
} | |
static void | |
button_proxy_init (ButtonProxy *proxy) | |
{ | |
#if GLIB_VERSION_MAX_ALLOWED >= GLIB_VERSION_2_38 | |
proxy->priv = button_proxy_get_instance_private (proxy); | |
#else | |
proxy->priv = G_TYPE_INSTANCE_GET_PRIVATE (proxy, TYPE_BUTTON_PROXY, ButtonProxyPrivate); | |
#endif | |
g_dbus_proxy_set_interface_info (G_DBUS_PROXY (proxy), button_interface_info ()); | |
} | |
static void | |
button_proxy_class_init (ButtonProxyClass *klass) | |
{ | |
GObjectClass *gobject_class; | |
GDBusProxyClass *proxy_class; | |
gobject_class = G_OBJECT_CLASS (klass); | |
gobject_class->finalize = button_proxy_finalize; | |
gobject_class->get_property = button_proxy_get_property; | |
gobject_class->set_property = button_proxy_set_property; | |
proxy_class = G_DBUS_PROXY_CLASS (klass); | |
proxy_class->g_signal = button_proxy_g_signal; | |
proxy_class->g_properties_changed = button_proxy_g_properties_changed; | |
button_override_properties (gobject_class, 1); | |
#if GLIB_VERSION_MAX_ALLOWED < GLIB_VERSION_2_38 | |
g_type_class_add_private (klass, sizeof (ButtonProxyPrivate)); | |
#endif | |
} | |
static void | |
button_proxy_iface_init (ButtonIface *iface) | |
{ | |
iface->get_state = button_proxy_get_state; | |
} | |
/** | |
* button_proxy_new: | |
* @connection: A #GDBusConnection. | |
* @flags: Flags from the #GDBusProxyFlags enumeration. | |
* @name: (allow-none): A bus name (well-known or unique) or %NULL if @connection is not a message bus connection. | |
* @object_path: An object path. | |
* @cancellable: (allow-none): A #GCancellable or %NULL. | |
* @callback: A #GAsyncReadyCallback to call when the request is satisfied. | |
* @user_data: User data to pass to @callback. | |
* | |
* Asynchronously creates a proxy for the D-Bus interface <link linkend="gdbus-interface-org-openbmc-Button.top_of_page">org.openbmc.Button</link>. See g_dbus_proxy_new() for more details. | |
* | |
* When the operation is finished, @callback will be invoked in the <link linkend="g-main-context-push-thread-default">thread-default main loop</link> of the thread you are calling this method from. | |
* You can then call button_proxy_new_finish() to get the result of the operation. | |
* | |
* See button_proxy_new_sync() for the synchronous, blocking version of this constructor. | |
*/ | |
void | |
button_proxy_new ( | |
GDBusConnection *connection, | |
GDBusProxyFlags flags, | |
const gchar *name, | |
const gchar *object_path, | |
GCancellable *cancellable, | |
GAsyncReadyCallback callback, | |
gpointer user_data) | |
{ | |
g_async_initable_new_async (TYPE_BUTTON_PROXY, G_PRIORITY_DEFAULT, cancellable, callback, user_data, "g-flags", flags, "g-name", name, "g-connection", connection, "g-object-path", object_path, "g-interface-name", "org.openbmc.Button", NULL); | |
} | |
/** | |
* button_proxy_new_finish: | |
* @res: The #GAsyncResult obtained from the #GAsyncReadyCallback passed to button_proxy_new(). | |
* @error: Return location for error or %NULL | |
* | |
* Finishes an operation started with button_proxy_new(). | |
* | |
* Returns: (transfer full) (type ButtonProxy): The constructed proxy object or %NULL if @error is set. | |
*/ | |
Button * | |
button_proxy_new_finish ( | |
GAsyncResult *res, | |
GError **error) | |
{ | |
GObject *ret; | |
GObject *source_object; | |
source_object = g_async_result_get_source_object (res); | |
ret = g_async_initable_new_finish (G_ASYNC_INITABLE (source_object), res, error); | |
g_object_unref (source_object); | |
if (ret != NULL) | |
return BUTTON (ret); | |
else | |
return NULL; | |
} | |
/** | |
* button_proxy_new_sync: | |
* @connection: A #GDBusConnection. | |
* @flags: Flags from the #GDBusProxyFlags enumeration. | |
* @name: (allow-none): A bus name (well-known or unique) or %NULL if @connection is not a message bus connection. | |
* @object_path: An object path. | |
* @cancellable: (allow-none): A #GCancellable or %NULL. | |
* @error: Return location for error or %NULL | |
* | |
* Synchronously creates a proxy for the D-Bus interface <link linkend="gdbus-interface-org-openbmc-Button.top_of_page">org.openbmc.Button</link>. See g_dbus_proxy_new_sync() for more details. | |
* | |
* The calling thread is blocked until a reply is received. | |
* | |
* See button_proxy_new() for the asynchronous version of this constructor. | |
* | |
* Returns: (transfer full) (type ButtonProxy): The constructed proxy object or %NULL if @error is set. | |
*/ | |
Button * | |
button_proxy_new_sync ( | |
GDBusConnection *connection, | |
GDBusProxyFlags flags, | |
const gchar *name, | |
const gchar *object_path, | |
GCancellable *cancellable, | |
GError **error) | |
{ | |
GInitable *ret; | |
ret = g_initable_new (TYPE_BUTTON_PROXY, cancellable, error, "g-flags", flags, "g-name", name, "g-connection", connection, "g-object-path", object_path, "g-interface-name", "org.openbmc.Button", NULL); | |
if (ret != NULL) | |
return BUTTON (ret); | |
else | |
return NULL; | |
} | |
/** | |
* button_proxy_new_for_bus: | |
* @bus_type: A #GBusType. | |
* @flags: Flags from the #GDBusProxyFlags enumeration. | |
* @name: A bus name (well-known or unique). | |
* @object_path: An object path. | |
* @cancellable: (allow-none): A #GCancellable or %NULL. | |
* @callback: A #GAsyncReadyCallback to call when the request is satisfied. | |
* @user_data: User data to pass to @callback. | |
* | |
* Like button_proxy_new() but takes a #GBusType instead of a #GDBusConnection. | |
* | |
* When the operation is finished, @callback will be invoked in the <link linkend="g-main-context-push-thread-default">thread-default main loop</link> of the thread you are calling this method from. | |
* You can then call button_proxy_new_for_bus_finish() to get the result of the operation. | |
* | |
* See button_proxy_new_for_bus_sync() for the synchronous, blocking version of this constructor. | |
*/ | |
void | |
button_proxy_new_for_bus ( | |
GBusType bus_type, | |
GDBusProxyFlags flags, | |
const gchar *name, | |
const gchar *object_path, | |
GCancellable *cancellable, | |
GAsyncReadyCallback callback, | |
gpointer user_data) | |
{ | |
g_async_initable_new_async (TYPE_BUTTON_PROXY, G_PRIORITY_DEFAULT, cancellable, callback, user_data, "g-flags", flags, "g-name", name, "g-bus-type", bus_type, "g-object-path", object_path, "g-interface-name", "org.openbmc.Button", NULL); | |
} | |
/** | |
* button_proxy_new_for_bus_finish: | |
* @res: The #GAsyncResult obtained from the #GAsyncReadyCallback passed to button_proxy_new_for_bus(). | |
* @error: Return location for error or %NULL | |
* | |
* Finishes an operation started with button_proxy_new_for_bus(). | |
* | |
* Returns: (transfer full) (type ButtonProxy): The constructed proxy object or %NULL if @error is set. | |
*/ | |
Button * | |
button_proxy_new_for_bus_finish ( | |
GAsyncResult *res, | |
GError **error) | |
{ | |
GObject *ret; | |
GObject *source_object; | |
source_object = g_async_result_get_source_object (res); | |
ret = g_async_initable_new_finish (G_ASYNC_INITABLE (source_object), res, error); | |
g_object_unref (source_object); | |
if (ret != NULL) | |
return BUTTON (ret); | |
else | |
return NULL; | |
} | |
/** | |
* button_proxy_new_for_bus_sync: | |
* @bus_type: A #GBusType. | |
* @flags: Flags from the #GDBusProxyFlags enumeration. | |
* @name: A bus name (well-known or unique). | |
* @object_path: An object path. | |
* @cancellable: (allow-none): A #GCancellable or %NULL. | |
* @error: Return location for error or %NULL | |
* | |
* Like button_proxy_new_sync() but takes a #GBusType instead of a #GDBusConnection. | |
* | |
* The calling thread is blocked until a reply is received. | |
* | |
* See button_proxy_new_for_bus() for the asynchronous version of this constructor. | |
* | |
* Returns: (transfer full) (type ButtonProxy): The constructed proxy object or %NULL if @error is set. | |
*/ | |
Button * | |
button_proxy_new_for_bus_sync ( | |
GBusType bus_type, | |
GDBusProxyFlags flags, | |
const gchar *name, | |
const gchar *object_path, | |
GCancellable *cancellable, | |
GError **error) | |
{ | |
GInitable *ret; | |
ret = g_initable_new (TYPE_BUTTON_PROXY, cancellable, error, "g-flags", flags, "g-name", name, "g-bus-type", bus_type, "g-object-path", object_path, "g-interface-name", "org.openbmc.Button", NULL); | |
if (ret != NULL) | |
return BUTTON (ret); | |
else | |
return NULL; | |
} | |
/* ------------------------------------------------------------------------ */ | |
/** | |
* ButtonSkeleton: | |
* | |
* The #ButtonSkeleton structure contains only private data and should only be accessed using the provided API. | |
*/ | |
/** | |
* ButtonSkeletonClass: | |
* @parent_class: The parent class. | |
* | |
* Class structure for #ButtonSkeleton. | |
*/ | |
struct _ButtonSkeletonPrivate | |
{ | |
GValue *properties; | |
GList *changed_properties; | |
GSource *changed_properties_idle_source; | |
GMainContext *context; | |
GMutex lock; | |
}; | |
static void | |
_button_skeleton_handle_method_call ( | |
GDBusConnection *connection G_GNUC_UNUSED, | |
const gchar *sender G_GNUC_UNUSED, | |
const gchar *object_path G_GNUC_UNUSED, | |
const gchar *interface_name, | |
const gchar *method_name, | |
GVariant *parameters, | |
GDBusMethodInvocation *invocation, | |
gpointer user_data) | |
{ | |
ButtonSkeleton *skeleton = BUTTON_SKELETON (user_data); | |
_ExtendedGDBusMethodInfo *info; | |
GVariantIter iter; | |
GVariant *child; | |
GValue *paramv; | |
guint num_params; | |
guint num_extra; | |
guint n; | |
guint signal_id; | |
GValue return_value = G_VALUE_INIT; | |
info = (_ExtendedGDBusMethodInfo *) g_dbus_method_invocation_get_method_info (invocation); | |
g_assert (info != NULL); | |
num_params = g_variant_n_children (parameters); | |
num_extra = info->pass_fdlist ? 3 : 2; paramv = g_new0 (GValue, num_params + num_extra); | |
n = 0; | |
g_value_init (¶mv[n], TYPE_BUTTON); | |
g_value_set_object (¶mv[n++], skeleton); | |
g_value_init (¶mv[n], G_TYPE_DBUS_METHOD_INVOCATION); | |
g_value_set_object (¶mv[n++], invocation); | |
if (info->pass_fdlist) | |
{ | |
#ifdef G_OS_UNIX | |
g_value_init (¶mv[n], G_TYPE_UNIX_FD_LIST); | |
g_value_set_object (¶mv[n++], g_dbus_message_get_unix_fd_list (g_dbus_method_invocation_get_message (invocation))); | |
#else | |
g_assert_not_reached (); | |
#endif | |
} | |
g_variant_iter_init (&iter, parameters); | |
while ((child = g_variant_iter_next_value (&iter)) != NULL) | |
{ | |
_ExtendedGDBusArgInfo *arg_info = (_ExtendedGDBusArgInfo *) info->parent_struct.in_args[n - num_extra]; | |
if (arg_info->use_gvariant) | |
{ | |
g_value_init (¶mv[n], G_TYPE_VARIANT); | |
g_value_set_variant (¶mv[n], child); | |
n++; | |
} | |
else | |
g_dbus_gvariant_to_gvalue (child, ¶mv[n++]); | |
g_variant_unref (child); | |
} | |
signal_id = g_signal_lookup (info->signal_name, TYPE_BUTTON); | |
g_value_init (&return_value, G_TYPE_BOOLEAN); | |
g_signal_emitv (paramv, signal_id, 0, &return_value); | |
if (!g_value_get_boolean (&return_value)) | |
g_dbus_method_invocation_return_error (invocation, G_DBUS_ERROR, G_DBUS_ERROR_UNKNOWN_METHOD, "Method %s is not implemented on interface %s", method_name, interface_name); | |
g_value_unset (&return_value); | |
for (n = 0; n < num_params + num_extra; n++) | |
g_value_unset (¶mv[n]); | |
g_free (paramv); | |
} | |
static GVariant * | |
_button_skeleton_handle_get_property ( | |
GDBusConnection *connection G_GNUC_UNUSED, | |
const gchar *sender G_GNUC_UNUSED, | |
const gchar *object_path G_GNUC_UNUSED, | |
const gchar *interface_name G_GNUC_UNUSED, | |
const gchar *property_name, | |
GError **error, | |
gpointer user_data) | |
{ | |
ButtonSkeleton *skeleton = BUTTON_SKELETON (user_data); | |
GValue value = G_VALUE_INIT; | |
GParamSpec *pspec; | |
_ExtendedGDBusPropertyInfo *info; | |
GVariant *ret; | |
ret = NULL; | |
info = (_ExtendedGDBusPropertyInfo *) g_dbus_interface_info_lookup_property ((GDBusInterfaceInfo *) &_button_interface_info.parent_struct, property_name); | |
g_assert (info != NULL); | |
pspec = g_object_class_find_property (G_OBJECT_GET_CLASS (skeleton), info->hyphen_name); | |
if (pspec == NULL) | |
{ | |
g_set_error (error, G_DBUS_ERROR, G_DBUS_ERROR_INVALID_ARGS, "No property with name %s", property_name); | |
} | |
else | |
{ | |
g_value_init (&value, pspec->value_type); | |
g_object_get_property (G_OBJECT (skeleton), info->hyphen_name, &value); | |
ret = g_dbus_gvalue_to_gvariant (&value, G_VARIANT_TYPE (info->parent_struct.signature)); | |
g_value_unset (&value); | |
} | |
return ret; | |
} | |
static gboolean | |
_button_skeleton_handle_set_property ( | |
GDBusConnection *connection G_GNUC_UNUSED, | |
const gchar *sender G_GNUC_UNUSED, | |
const gchar *object_path G_GNUC_UNUSED, | |
const gchar *interface_name G_GNUC_UNUSED, | |
const gchar *property_name, | |
GVariant *variant, | |
GError **error, | |
gpointer user_data) | |
{ | |
ButtonSkeleton *skeleton = BUTTON_SKELETON (user_data); | |
GValue value = G_VALUE_INIT; | |
GParamSpec *pspec; | |
_ExtendedGDBusPropertyInfo *info; | |
gboolean ret; | |
ret = FALSE; | |
info = (_ExtendedGDBusPropertyInfo *) g_dbus_interface_info_lookup_property ((GDBusInterfaceInfo *) &_button_interface_info.parent_struct, property_name); | |
g_assert (info != NULL); | |
pspec = g_object_class_find_property (G_OBJECT_GET_CLASS (skeleton), info->hyphen_name); | |
if (pspec == NULL) | |
{ | |
g_set_error (error, G_DBUS_ERROR, G_DBUS_ERROR_INVALID_ARGS, "No property with name %s", property_name); | |
} | |
else | |
{ | |
if (info->use_gvariant) | |
g_value_set_variant (&value, variant); | |
else | |
g_dbus_gvariant_to_gvalue (variant, &value); | |
g_object_set_property (G_OBJECT (skeleton), info->hyphen_name, &value); | |
g_value_unset (&value); | |
ret = TRUE; | |
} | |
return ret; | |
} | |
static const GDBusInterfaceVTable _button_skeleton_vtable = | |
{ | |
_button_skeleton_handle_method_call, | |
_button_skeleton_handle_get_property, | |
_button_skeleton_handle_set_property, | |
{NULL} | |
}; | |
static GDBusInterfaceInfo * | |
button_skeleton_dbus_interface_get_info (GDBusInterfaceSkeleton *skeleton G_GNUC_UNUSED) | |
{ | |
return button_interface_info (); | |
} | |
static GDBusInterfaceVTable * | |
button_skeleton_dbus_interface_get_vtable (GDBusInterfaceSkeleton *skeleton G_GNUC_UNUSED) | |
{ | |
return (GDBusInterfaceVTable *) &_button_skeleton_vtable; | |
} | |
static GVariant * | |
button_skeleton_dbus_interface_get_properties (GDBusInterfaceSkeleton *_skeleton) | |
{ | |
ButtonSkeleton *skeleton = BUTTON_SKELETON (_skeleton); | |
GVariantBuilder builder; | |
guint n; | |
g_variant_builder_init (&builder, G_VARIANT_TYPE ("a{sv}")); | |
if (_button_interface_info.parent_struct.properties == NULL) | |
goto out; | |
for (n = 0; _button_interface_info.parent_struct.properties[n] != NULL; n++) | |
{ | |
GDBusPropertyInfo *info = _button_interface_info.parent_struct.properties[n]; | |
if (info->flags & G_DBUS_PROPERTY_INFO_FLAGS_READABLE) | |
{ | |
GVariant *value; | |
value = _button_skeleton_handle_get_property (g_dbus_interface_skeleton_get_connection (G_DBUS_INTERFACE_SKELETON (skeleton)), NULL, g_dbus_interface_skeleton_get_object_path (G_DBUS_INTERFACE_SKELETON (skeleton)), "org.openbmc.Button", info->name, NULL, skeleton); | |
if (value != NULL) | |
{ | |
g_variant_take_ref (value); | |
g_variant_builder_add (&builder, "{sv}", info->name, value); | |
g_variant_unref (value); | |
} | |
} | |
} | |
out: | |
return g_variant_builder_end (&builder); | |
} | |
static gboolean _button_emit_changed (gpointer user_data); | |
static void | |
button_skeleton_dbus_interface_flush (GDBusInterfaceSkeleton *_skeleton) | |
{ | |
ButtonSkeleton *skeleton = BUTTON_SKELETON (_skeleton); | |
gboolean emit_changed = FALSE; | |
g_mutex_lock (&skeleton->priv->lock); | |
if (skeleton->priv->changed_properties_idle_source != NULL) | |
{ | |
g_source_destroy (skeleton->priv->changed_properties_idle_source); | |
skeleton->priv->changed_properties_idle_source = NULL; | |
emit_changed = TRUE; | |
} | |
g_mutex_unlock (&skeleton->priv->lock); | |
if (emit_changed) | |
_button_emit_changed (skeleton); | |
} | |
static void | |
_button_on_signal_button_release ( | |
Button *object) | |
{ | |
ButtonSkeleton *skeleton = BUTTON_SKELETON (object); | |
GList *connections, *l; | |
GVariant *signal_variant; | |
connections = g_dbus_interface_skeleton_get_connections (G_DBUS_INTERFACE_SKELETON (skeleton)); | |
signal_variant = g_variant_ref_sink (g_variant_new ("()")); | |
for (l = connections; l != NULL; l = l->next) | |
{ | |
GDBusConnection *connection = l->data; | |
g_dbus_connection_emit_signal (connection, | |
NULL, g_dbus_interface_skeleton_get_object_path (G_DBUS_INTERFACE_SKELETON (skeleton)), "org.openbmc.Button", "ButtonRelease", | |
signal_variant, NULL); | |
} | |
g_variant_unref (signal_variant); | |
g_list_free_full (connections, g_object_unref); | |
} | |
static void | |
_button_on_signal_button_pressed ( | |
Button *object) | |
{ | |
ButtonSkeleton *skeleton = BUTTON_SKELETON (object); | |
GList *connections, *l; | |
GVariant *signal_variant; | |
connections = g_dbus_interface_skeleton_get_connections (G_DBUS_INTERFACE_SKELETON (skeleton)); | |
signal_variant = g_variant_ref_sink (g_variant_new ("()")); | |
for (l = connections; l != NULL; l = l->next) | |
{ | |
GDBusConnection *connection = l->data; | |
g_dbus_connection_emit_signal (connection, | |
NULL, g_dbus_interface_skeleton_get_object_path (G_DBUS_INTERFACE_SKELETON (skeleton)), "org.openbmc.Button", "ButtonPressed", | |
signal_variant, NULL); | |
} | |
g_variant_unref (signal_variant); | |
g_list_free_full (connections, g_object_unref); | |
} | |
static void | |
_button_on_signal_button_pressed_long ( | |
Button *object) | |
{ | |
ButtonSkeleton *skeleton = BUTTON_SKELETON (object); | |
GList *connections, *l; | |
GVariant *signal_variant; | |
connections = g_dbus_interface_skeleton_get_connections (G_DBUS_INTERFACE_SKELETON (skeleton)); | |
signal_variant = g_variant_ref_sink (g_variant_new ("()")); | |
for (l = connections; l != NULL; l = l->next) | |
{ | |
GDBusConnection *connection = l->data; | |
g_dbus_connection_emit_signal (connection, | |
NULL, g_dbus_interface_skeleton_get_object_path (G_DBUS_INTERFACE_SKELETON (skeleton)), "org.openbmc.Button", "ButtonPressedLong", | |
signal_variant, NULL); | |
} | |
g_variant_unref (signal_variant); | |
g_list_free_full (connections, g_object_unref); | |
} | |
static void button_skeleton_iface_init (ButtonIface *iface); | |
#if GLIB_VERSION_MAX_ALLOWED >= GLIB_VERSION_2_38 | |
G_DEFINE_TYPE_WITH_CODE (ButtonSkeleton, button_skeleton, G_TYPE_DBUS_INTERFACE_SKELETON, | |
G_ADD_PRIVATE (ButtonSkeleton) | |
G_IMPLEMENT_INTERFACE (TYPE_BUTTON, button_skeleton_iface_init)); | |
#else | |
G_DEFINE_TYPE_WITH_CODE (ButtonSkeleton, button_skeleton, G_TYPE_DBUS_INTERFACE_SKELETON, | |
G_IMPLEMENT_INTERFACE (TYPE_BUTTON, button_skeleton_iface_init)); | |
#endif | |
static void | |
button_skeleton_finalize (GObject *object) | |
{ | |
ButtonSkeleton *skeleton = BUTTON_SKELETON (object); | |
guint n; | |
for (n = 0; n < 1; n++) | |
g_value_unset (&skeleton->priv->properties[n]); | |
g_free (skeleton->priv->properties); | |
g_list_free_full (skeleton->priv->changed_properties, (GDestroyNotify) _changed_property_free); | |
if (skeleton->priv->changed_properties_idle_source != NULL) | |
g_source_destroy (skeleton->priv->changed_properties_idle_source); | |
g_main_context_unref (skeleton->priv->context); | |
g_mutex_clear (&skeleton->priv->lock); | |
G_OBJECT_CLASS (button_skeleton_parent_class)->finalize (object); | |
} | |
static void | |
button_skeleton_get_property (GObject *object, | |
guint prop_id, | |
GValue *value, | |
GParamSpec *pspec G_GNUC_UNUSED) | |
{ | |
ButtonSkeleton *skeleton = BUTTON_SKELETON (object); | |
g_assert (prop_id != 0 && prop_id - 1 < 1); | |
g_mutex_lock (&skeleton->priv->lock); | |
g_value_copy (&skeleton->priv->properties[prop_id - 1], value); | |
g_mutex_unlock (&skeleton->priv->lock); | |
} | |
static gboolean | |
_button_emit_changed (gpointer user_data) | |
{ | |
ButtonSkeleton *skeleton = BUTTON_SKELETON (user_data); | |
GList *l; | |
GVariantBuilder builder; | |
GVariantBuilder invalidated_builder; | |
guint num_changes; | |
g_mutex_lock (&skeleton->priv->lock); | |
g_variant_builder_init (&builder, G_VARIANT_TYPE ("a{sv}")); | |
g_variant_builder_init (&invalidated_builder, G_VARIANT_TYPE ("as")); | |
for (l = skeleton->priv->changed_properties, num_changes = 0; l != NULL; l = l->next) | |
{ | |
ChangedProperty *cp = l->data; | |
GVariant *variant; | |
const GValue *cur_value; | |
cur_value = &skeleton->priv->properties[cp->prop_id - 1]; | |
if (!_g_value_equal (cur_value, &cp->orig_value)) | |
{ | |
variant = g_dbus_gvalue_to_gvariant (cur_value, G_VARIANT_TYPE (cp->info->parent_struct.signature)); | |
g_variant_builder_add (&builder, "{sv}", cp->info->parent_struct.name, variant); | |
g_variant_unref (variant); | |
num_changes++; | |
} | |
} | |
if (num_changes > 0) | |
{ | |
GList *connections, *ll; | |
GVariant *signal_variant; | |
signal_variant = g_variant_ref_sink (g_variant_new ("(sa{sv}as)", "org.openbmc.Button", | |
&builder, &invalidated_builder)); | |
connections = g_dbus_interface_skeleton_get_connections (G_DBUS_INTERFACE_SKELETON (skeleton)); | |
for (ll = connections; ll != NULL; ll = ll->next) | |
{ | |
GDBusConnection *connection = ll->data; | |
g_dbus_connection_emit_signal (connection, | |
NULL, g_dbus_interface_skeleton_get_object_path (G_DBUS_INTERFACE_SKELETON (skeleton)), | |
"org.freedesktop.DBus.Properties", | |
"PropertiesChanged", | |
signal_variant, | |
NULL); | |
} | |
g_variant_unref (signal_variant); | |
g_list_free_full (connections, g_object_unref); | |
} | |
else | |
{ | |
g_variant_builder_clear (&builder); | |
g_variant_builder_clear (&invalidated_builder); | |
} | |
g_list_free_full (skeleton->priv->changed_properties, (GDestroyNotify) _changed_property_free); | |
skeleton->priv->changed_properties = NULL; | |
skeleton->priv->changed_properties_idle_source = NULL; | |
g_mutex_unlock (&skeleton->priv->lock); | |
return FALSE; | |
} | |
static void | |
_button_schedule_emit_changed (ButtonSkeleton *skeleton, const _ExtendedGDBusPropertyInfo *info, guint prop_id, const GValue *orig_value) | |
{ | |
ChangedProperty *cp; | |
GList *l; | |
cp = NULL; | |
for (l = skeleton->priv->changed_properties; l != NULL; l = l->next) | |
{ | |
ChangedProperty *i_cp = l->data; | |
if (i_cp->info == info) | |
{ | |
cp = i_cp; | |
break; | |
} | |
} | |
if (cp == NULL) | |
{ | |
cp = g_new0 (ChangedProperty, 1); | |
cp->prop_id = prop_id; | |
cp->info = info; | |
skeleton->priv->changed_properties = g_list_prepend (skeleton->priv->changed_properties, cp); | |
g_value_init (&cp->orig_value, G_VALUE_TYPE (orig_value)); | |
g_value_copy (orig_value, &cp->orig_value); | |
} | |
} | |
static void | |
button_skeleton_notify (GObject *object, | |
GParamSpec *pspec G_GNUC_UNUSED) | |
{ | |
ButtonSkeleton *skeleton = BUTTON_SKELETON (object); | |
g_mutex_lock (&skeleton->priv->lock); | |
if (skeleton->priv->changed_properties != NULL && | |
skeleton->priv->changed_properties_idle_source == NULL) | |
{ | |
skeleton->priv->changed_properties_idle_source = g_idle_source_new (); | |
g_source_set_priority (skeleton->priv->changed_properties_idle_source, G_PRIORITY_DEFAULT); | |
g_source_set_callback (skeleton->priv->changed_properties_idle_source, _button_emit_changed, g_object_ref (skeleton), (GDestroyNotify) g_object_unref); | |
g_source_attach (skeleton->priv->changed_properties_idle_source, skeleton->priv->context); | |
g_source_unref (skeleton->priv->changed_properties_idle_source); | |
} | |
g_mutex_unlock (&skeleton->priv->lock); | |
} | |
static void | |
button_skeleton_set_property (GObject *object, | |
guint prop_id, | |
const GValue *value, | |
GParamSpec *pspec) | |
{ | |
ButtonSkeleton *skeleton = BUTTON_SKELETON (object); | |
g_assert (prop_id != 0 && prop_id - 1 < 1); | |
g_mutex_lock (&skeleton->priv->lock); | |
g_object_freeze_notify (object); | |
if (!_g_value_equal (value, &skeleton->priv->properties[prop_id - 1])) | |
{ | |
if (g_dbus_interface_skeleton_get_connection (G_DBUS_INTERFACE_SKELETON (skeleton)) != NULL) | |
_button_schedule_emit_changed (skeleton, _button_property_info_pointers[prop_id - 1], prop_id, &skeleton->priv->properties[prop_id - 1]); | |
g_value_copy (value, &skeleton->priv->properties[prop_id - 1]); | |
g_object_notify_by_pspec (object, pspec); | |
} | |
g_mutex_unlock (&skeleton->priv->lock); | |
g_object_thaw_notify (object); | |
} | |
static void | |
button_skeleton_init (ButtonSkeleton *skeleton) | |
{ | |
#if GLIB_VERSION_MAX_ALLOWED >= GLIB_VERSION_2_38 | |
skeleton->priv = button_skeleton_get_instance_private (skeleton); | |
#else | |
skeleton->priv = G_TYPE_INSTANCE_GET_PRIVATE (skeleton, TYPE_BUTTON_SKELETON, ButtonSkeletonPrivate); | |
#endif | |
g_mutex_init (&skeleton->priv->lock); | |
skeleton->priv->context = g_main_context_ref_thread_default (); | |
skeleton->priv->properties = g_new0 (GValue, 1); | |
g_value_init (&skeleton->priv->properties[0], G_TYPE_BOOLEAN); | |
} | |
static gboolean | |
button_skeleton_get_state (Button *object) | |
{ | |
ButtonSkeleton *skeleton = BUTTON_SKELETON (object); | |
gboolean value; | |
g_mutex_lock (&skeleton->priv->lock); | |
value = g_value_get_boolean (&(skeleton->priv->properties[0])); | |
g_mutex_unlock (&skeleton->priv->lock); | |
return value; | |
} | |
static void | |
button_skeleton_class_init (ButtonSkeletonClass *klass) | |
{ | |
GObjectClass *gobject_class; | |
GDBusInterfaceSkeletonClass *skeleton_class; | |
gobject_class = G_OBJECT_CLASS (klass); | |
gobject_class->finalize = button_skeleton_finalize; | |
gobject_class->get_property = button_skeleton_get_property; | |
gobject_class->set_property = button_skeleton_set_property; | |
gobject_class->notify = button_skeleton_notify; | |
button_override_properties (gobject_class, 1); | |
skeleton_class = G_DBUS_INTERFACE_SKELETON_CLASS (klass); | |
skeleton_class->get_info = button_skeleton_dbus_interface_get_info; | |
skeleton_class->get_properties = button_skeleton_dbus_interface_get_properties; | |
skeleton_class->flush = button_skeleton_dbus_interface_flush; | |
skeleton_class->get_vtable = button_skeleton_dbus_interface_get_vtable; | |
#if GLIB_VERSION_MAX_ALLOWED < GLIB_VERSION_2_38 | |
g_type_class_add_private (klass, sizeof (ButtonSkeletonPrivate)); | |
#endif | |
} | |
static void | |
button_skeleton_iface_init (ButtonIface *iface) | |
{ | |
iface->button_release = _button_on_signal_button_release; | |
iface->button_pressed = _button_on_signal_button_pressed; | |
iface->button_pressed_long = _button_on_signal_button_pressed_long; | |
iface->get_state = button_skeleton_get_state; | |
} | |
/** | |
* button_skeleton_new: | |
* | |
* Creates a skeleton object for the D-Bus interface <link linkend="gdbus-interface-org-openbmc-Button.top_of_page">org.openbmc.Button</link>. | |
* | |
* Returns: (transfer full) (type ButtonSkeleton): The skeleton object. | |
*/ | |
Button * | |
button_skeleton_new (void) | |
{ | |
return BUTTON (g_object_new (TYPE_BUTTON_SKELETON, NULL)); | |
} | |
/* ------------------------------------------------------------------------ | |
* Code for Object, ObjectProxy and ObjectSkeleton | |
* ------------------------------------------------------------------------ | |
*/ | |
/** | |
* SECTION:Object | |
* @title: Object | |
* @short_description: Specialized GDBusObject types | |
* | |
* This section contains the #Object, #ObjectProxy, and #ObjectSkeleton types which make it easier to work with objects implementing generated types for D-Bus interfaces. | |
*/ | |
/** | |
* Object: | |
* | |
* The #Object type is a specialized container of interfaces. | |
*/ | |
/** | |
* ObjectIface: | |
* @parent_iface: The parent interface. | |
* | |
* Virtual table for the #Object interface. | |
*/ | |
typedef ObjectIface ObjectInterface; | |
G_DEFINE_INTERFACE_WITH_CODE (Object, object, G_TYPE_OBJECT, g_type_interface_add_prerequisite (g_define_type_id, G_TYPE_DBUS_OBJECT)); | |
static void | |
object_default_init (ObjectIface *iface) | |
{ | |
/** | |
* Object:button: | |
* | |
* The #Button instance corresponding to the D-Bus interface <link linkend="gdbus-interface-org-openbmc-Button.top_of_page">org.openbmc.Button</link>, if any. | |
* | |
* Connect to the #GObject::notify signal to get informed of property changes. | |
*/ | |
g_object_interface_install_property (iface, g_param_spec_object ("button", "button", "button", TYPE_BUTTON, G_PARAM_READWRITE|G_PARAM_STATIC_STRINGS)); | |
} | |
/** | |
* object_get_button: | |
* @object: A #Object. | |
* | |
* Gets the #Button instance for the D-Bus interface <link linkend="gdbus-interface-org-openbmc-Button.top_of_page">org.openbmc.Button</link> on @object, if any. | |
* | |
* Returns: (transfer full): A #Button that must be freed with g_object_unref() or %NULL if @object does not implement the interface. | |
*/ | |
Button *object_get_button (Object *object) | |
{ | |
GDBusInterface *ret; | |
ret = g_dbus_object_get_interface (G_DBUS_OBJECT (object), "org.openbmc.Button"); | |
if (ret == NULL) | |
return NULL; | |
return BUTTON (ret); | |
} | |
/** | |
* object_peek_button: (skip) | |
* @object: A #Object. | |
* | |
* Like object_get_button() but doesn't increase the reference count on the returned object. | |
* | |
* <warning>It is not safe to use the returned object if you are on another thread than the one where the #GDBusObjectManagerClient or #GDBusObjectManagerServer for @object is running.</warning> | |
* | |
* Returns: (transfer none): A #Button or %NULL if @object does not implement the interface. Do not free the returned object, it is owned by @object. | |
*/ | |
Button *object_peek_button (Object *object) | |
{ | |
GDBusInterface *ret; | |
ret = g_dbus_object_get_interface (G_DBUS_OBJECT (object), "org.openbmc.Button"); | |
if (ret == NULL) | |
return NULL; | |
g_object_unref (ret); | |
return BUTTON (ret); | |
} | |
static void | |
object_notify (GDBusObject *object, GDBusInterface *interface) | |
{ | |
_ExtendedGDBusInterfaceInfo *info = (_ExtendedGDBusInterfaceInfo *) g_dbus_interface_get_info (interface); | |
/* info can be NULL if the other end is using a D-Bus interface we don't know | |
* anything about, for example old generated code in this process talking to | |
* newer generated code in the other process. */ | |
if (info != NULL) | |
g_object_notify (G_OBJECT (object), info->hyphen_name); | |
} | |
/** | |
* ObjectProxy: | |
* | |
* The #ObjectProxy structure contains only private data and should only be accessed using the provided API. | |
*/ | |
/** | |
* ObjectProxyClass: | |
* @parent_class: The parent class. | |
* | |
* Class structure for #ObjectProxy. | |
*/ | |
static void | |
object_proxy__object_iface_init (ObjectIface *iface G_GNUC_UNUSED) | |
{ | |
} | |
static void | |
object_proxy__g_dbus_object_iface_init (GDBusObjectIface *iface) | |
{ | |
iface->interface_added = object_notify; | |
iface->interface_removed = object_notify; | |
} | |
G_DEFINE_TYPE_WITH_CODE (ObjectProxy, object_proxy, G_TYPE_DBUS_OBJECT_PROXY, | |
G_IMPLEMENT_INTERFACE (TYPE_OBJECT, object_proxy__object_iface_init) | |
G_IMPLEMENT_INTERFACE (G_TYPE_DBUS_OBJECT, object_proxy__g_dbus_object_iface_init)); | |
static void | |
object_proxy_init (ObjectProxy *object G_GNUC_UNUSED) | |
{ | |
} | |
static void | |
object_proxy_set_property (GObject *gobject, | |
guint prop_id, | |
const GValue *value G_GNUC_UNUSED, | |
GParamSpec *pspec) | |
{ | |
G_OBJECT_WARN_INVALID_PROPERTY_ID (gobject, prop_id, pspec); | |
} | |
static void | |
object_proxy_get_property (GObject *gobject, | |
guint prop_id, | |
GValue *value, | |
GParamSpec *pspec) | |
{ | |
ObjectProxy *object = OBJECT_PROXY (gobject); | |
GDBusInterface *interface; | |
switch (prop_id) | |
{ | |
case 1: | |
interface = g_dbus_object_get_interface (G_DBUS_OBJECT (object), "org.openbmc.Button"); | |
g_value_take_object (value, interface); | |
break; | |
default: | |
G_OBJECT_WARN_INVALID_PROPERTY_ID (gobject, prop_id, pspec); | |
break; | |
} | |
} | |
static void | |
object_proxy_class_init (ObjectProxyClass *klass) | |
{ | |
GObjectClass *gobject_class = G_OBJECT_CLASS (klass); | |
gobject_class->set_property = object_proxy_set_property; | |
gobject_class->get_property = object_proxy_get_property; | |
g_object_class_override_property (gobject_class, 1, "button"); | |
} | |
/** | |
* object_proxy_new: | |
* @connection: A #GDBusConnection. | |
* @object_path: An object path. | |
* | |
* Creates a new proxy object. | |
* | |
* Returns: (transfer full): The proxy object. | |
*/ | |
ObjectProxy * | |
object_proxy_new (GDBusConnection *connection, | |
const gchar *object_path) | |
{ | |
g_return_val_if_fail (G_IS_DBUS_CONNECTION (connection), NULL); | |
g_return_val_if_fail (g_variant_is_object_path (object_path), NULL); | |
return OBJECT_PROXY (g_object_new (TYPE_OBJECT_PROXY, "g-connection", connection, "g-object-path", object_path, NULL)); | |
} | |
/** | |
* ObjectSkeleton: | |
* | |
* The #ObjectSkeleton structure contains only private data and should only be accessed using the provided API. | |
*/ | |
/** | |
* ObjectSkeletonClass: | |
* @parent_class: The parent class. | |
* | |
* Class structure for #ObjectSkeleton. | |
*/ | |
static void | |
object_skeleton__object_iface_init (ObjectIface *iface G_GNUC_UNUSED) | |
{ | |
} | |
static void | |
object_skeleton__g_dbus_object_iface_init (GDBusObjectIface *iface) | |
{ | |
iface->interface_added = object_notify; | |
iface->interface_removed = object_notify; | |
} | |
G_DEFINE_TYPE_WITH_CODE (ObjectSkeleton, object_skeleton, G_TYPE_DBUS_OBJECT_SKELETON, | |
G_IMPLEMENT_INTERFACE (TYPE_OBJECT, object_skeleton__object_iface_init) | |
G_IMPLEMENT_INTERFACE (G_TYPE_DBUS_OBJECT, object_skeleton__g_dbus_object_iface_init)); | |
static void | |
object_skeleton_init (ObjectSkeleton *object G_GNUC_UNUSED) | |
{ | |
} | |
static void | |
object_skeleton_set_property (GObject *gobject, | |
guint prop_id, | |
const GValue *value, | |
GParamSpec *pspec) | |
{ | |
ObjectSkeleton *object = OBJECT_SKELETON (gobject); | |
GDBusInterfaceSkeleton *interface; | |
switch (prop_id) | |
{ | |
case 1: | |
interface = g_value_get_object (value); | |
if (interface != NULL) | |
{ | |
g_warn_if_fail (IS_BUTTON (interface)); | |
g_dbus_object_skeleton_add_interface (G_DBUS_OBJECT_SKELETON (object), interface); | |
} | |
else | |
{ | |
g_dbus_object_skeleton_remove_interface_by_name (G_DBUS_OBJECT_SKELETON (object), "org.openbmc.Button"); | |
} | |
break; | |
default: | |
G_OBJECT_WARN_INVALID_PROPERTY_ID (gobject, prop_id, pspec); | |
break; | |
} | |
} | |
static void | |
object_skeleton_get_property (GObject *gobject, | |
guint prop_id, | |
GValue *value, | |
GParamSpec *pspec) | |
{ | |
ObjectSkeleton *object = OBJECT_SKELETON (gobject); | |
GDBusInterface *interface; | |
switch (prop_id) | |
{ | |
case 1: | |
interface = g_dbus_object_get_interface (G_DBUS_OBJECT (object), "org.openbmc.Button"); | |
g_value_take_object (value, interface); | |
break; | |
default: | |
G_OBJECT_WARN_INVALID_PROPERTY_ID (gobject, prop_id, pspec); | |
break; | |
} | |
} | |
static void | |
object_skeleton_class_init (ObjectSkeletonClass *klass) | |
{ | |
GObjectClass *gobject_class = G_OBJECT_CLASS (klass); | |
gobject_class->set_property = object_skeleton_set_property; | |
gobject_class->get_property = object_skeleton_get_property; | |
g_object_class_override_property (gobject_class, 1, "button"); | |
} | |
/** | |
* object_skeleton_new: | |
* @object_path: An object path. | |
* | |
* Creates a new skeleton object. | |
* | |
* Returns: (transfer full): The skeleton object. | |
*/ | |
ObjectSkeleton * | |
object_skeleton_new (const gchar *object_path) | |
{ | |
g_return_val_if_fail (g_variant_is_object_path (object_path), NULL); | |
return OBJECT_SKELETON (g_object_new (TYPE_OBJECT_SKELETON, "g-object-path", object_path, NULL)); | |
} | |
/** | |
* object_skeleton_set_button: | |
* @object: A #ObjectSkeleton. | |
* @interface_: (allow-none): A #Button or %NULL to clear the interface. | |
* | |
* Sets the #Button instance for the D-Bus interface <link linkend="gdbus-interface-org-openbmc-Button.top_of_page">org.openbmc.Button</link> on @object. | |
*/ | |
void object_skeleton_set_button (ObjectSkeleton *object, Button *interface_) | |
{ | |
g_object_set (G_OBJECT (object), "button", interface_, NULL); | |
} | |
/* ------------------------------------------------------------------------ | |
* Code for ObjectManager client | |
* ------------------------------------------------------------------------ | |
*/ | |
/** | |
* SECTION:ObjectManagerClient | |
* @title: ObjectManagerClient | |
* @short_description: Generated GDBusObjectManagerClient type | |
* | |
* This section contains a #GDBusObjectManagerClient that uses object_manager_client_get_proxy_type() as the #GDBusProxyTypeFunc. | |
*/ | |
/** | |
* ObjectManagerClient: | |
* | |
* The #ObjectManagerClient structure contains only private data and should only be accessed using the provided API. | |
*/ | |
/** | |
* ObjectManagerClientClass: | |
* @parent_class: The parent class. | |
* | |
* Class structure for #ObjectManagerClient. | |
*/ | |
G_DEFINE_TYPE (ObjectManagerClient, object_manager_client, G_TYPE_DBUS_OBJECT_MANAGER_CLIENT); | |
static void | |
object_manager_client_init (ObjectManagerClient *manager G_GNUC_UNUSED) | |
{ | |
} | |
static void | |
object_manager_client_class_init (ObjectManagerClientClass *klass G_GNUC_UNUSED) | |
{ | |
} | |
/** | |
* object_manager_client_get_proxy_type: | |
* @manager: A #GDBusObjectManagerClient. | |
* @object_path: The object path of the remote object (unused). | |
* @interface_name: (allow-none): Interface name of the remote object or %NULL to get the object proxy #GType. | |
* @user_data: User data (unused). | |
* | |
* A #GDBusProxyTypeFunc that maps @interface_name to the generated #GDBusObjectProxy<!-- -->- and #GDBusProxy<!-- -->-derived types. | |
* | |
* Returns: A #GDBusProxy<!-- -->-derived #GType if @interface_name is not %NULL, otherwise the #GType for #ObjectProxy. | |
*/ | |
GType | |
object_manager_client_get_proxy_type (GDBusObjectManagerClient *manager G_GNUC_UNUSED, const gchar *object_path G_GNUC_UNUSED, const gchar *interface_name, gpointer user_data G_GNUC_UNUSED) | |
{ | |
static gsize once_init_value = 0; | |
static GHashTable *lookup_hash; | |
GType ret; | |
if (interface_name == NULL) | |
return TYPE_OBJECT_PROXY; | |
if (g_once_init_enter (&once_init_value)) | |
{ | |
lookup_hash = g_hash_table_new (g_str_hash, g_str_equal); | |
g_hash_table_insert (lookup_hash, (gpointer) "org.openbmc.Button", GSIZE_TO_POINTER (TYPE_BUTTON_PROXY)); | |
g_once_init_leave (&once_init_value, 1); | |
} | |
ret = (GType) GPOINTER_TO_SIZE (g_hash_table_lookup (lookup_hash, interface_name)); | |
if (ret == (GType) 0) | |
ret = G_TYPE_DBUS_PROXY; | |
return ret; | |
} | |
/** | |
* object_manager_client_new: | |
* @connection: A #GDBusConnection. | |
* @flags: Flags from the #GDBusObjectManagerClientFlags enumeration. | |
* @name: (allow-none): A bus name (well-known or unique) or %NULL if @connection is not a message bus connection. | |
* @object_path: An object path. | |
* @cancellable: (allow-none): A #GCancellable or %NULL. | |
* @callback: A #GAsyncReadyCallback to call when the request is satisfied. | |
* @user_data: User data to pass to @callback. | |
* | |
* Asynchronously creates #GDBusObjectManagerClient using object_manager_client_get_proxy_type() as the #GDBusProxyTypeFunc. See g_dbus_object_manager_client_new() for more details. | |
* | |
* When the operation is finished, @callback will be invoked in the <link linkend="g-main-context-push-thread-default">thread-default main loop</link> of the thread you are calling this method from. | |
* You can then call object_manager_client_new_finish() to get the result of the operation. | |
* | |
* See object_manager_client_new_sync() for the synchronous, blocking version of this constructor. | |
*/ | |
void | |
object_manager_client_new ( | |
GDBusConnection *connection, | |
GDBusObjectManagerClientFlags flags, | |
const gchar *name, | |
const gchar *object_path, | |
GCancellable *cancellable, | |
GAsyncReadyCallback callback, | |
gpointer user_data) | |
{ | |
g_async_initable_new_async (TYPE_OBJECT_MANAGER_CLIENT, G_PRIORITY_DEFAULT, cancellable, callback, user_data, "flags", flags, "name", name, "connection", connection, "object-path", object_path, "get-proxy-type-func", object_manager_client_get_proxy_type, NULL); | |
} | |
/** | |
* object_manager_client_new_finish: | |
* @res: The #GAsyncResult obtained from the #GAsyncReadyCallback passed to object_manager_client_new(). | |
* @error: Return location for error or %NULL | |
* | |
* Finishes an operation started with object_manager_client_new(). | |
* | |
* Returns: (transfer full) (type ObjectManagerClient): The constructed object manager client or %NULL if @error is set. | |
*/ | |
GDBusObjectManager * | |
object_manager_client_new_finish ( | |
GAsyncResult *res, | |
GError **error) | |
{ | |
GObject *ret; | |
GObject *source_object; | |
source_object = g_async_result_get_source_object (res); | |
ret = g_async_initable_new_finish (G_ASYNC_INITABLE (source_object), res, error); | |
g_object_unref (source_object); | |
if (ret != NULL) | |
return G_DBUS_OBJECT_MANAGER (ret); | |
else | |
return NULL; | |
} | |
/** | |
* object_manager_client_new_sync: | |
* @connection: A #GDBusConnection. | |
* @flags: Flags from the #GDBusObjectManagerClientFlags enumeration. | |
* @name: (allow-none): A bus name (well-known or unique) or %NULL if @connection is not a message bus connection. | |
* @object_path: An object path. | |
* @cancellable: (allow-none): A #GCancellable or %NULL. | |
* @error: Return location for error or %NULL | |
* | |
* Synchronously creates #GDBusObjectManagerClient using object_manager_client_get_proxy_type() as the #GDBusProxyTypeFunc. See g_dbus_object_manager_client_new_sync() for more details. | |
* | |
* The calling thread is blocked until a reply is received. | |
* | |
* See object_manager_client_new() for the asynchronous version of this constructor. | |
* | |
* Returns: (transfer full) (type ObjectManagerClient): The constructed object manager client or %NULL if @error is set. | |
*/ | |
GDBusObjectManager * | |
object_manager_client_new_sync ( | |
GDBusConnection *connection, | |
GDBusObjectManagerClientFlags flags, | |
const gchar *name, | |
const gchar *object_path, | |
GCancellable *cancellable, | |
GError **error) | |
{ | |
GInitable *ret; | |
ret = g_initable_new (TYPE_OBJECT_MANAGER_CLIENT, cancellable, error, "flags", flags, "name", name, "connection", connection, "object-path", object_path, "get-proxy-type-func", object_manager_client_get_proxy_type, NULL); | |
if (ret != NULL) | |
return G_DBUS_OBJECT_MANAGER (ret); | |
else | |
return NULL; | |
} | |
/** | |
* object_manager_client_new_for_bus: | |
* @bus_type: A #GBusType. | |
* @flags: Flags from the #GDBusObjectManagerClientFlags enumeration. | |
* @name: A bus name (well-known or unique). | |
* @object_path: An object path. | |
* @cancellable: (allow-none): A #GCancellable or %NULL. | |
* @callback: A #GAsyncReadyCallback to call when the request is satisfied. | |
* @user_data: User data to pass to @callback. | |
* | |
* Like object_manager_client_new() but takes a #GBusType instead of a #GDBusConnection. | |
* | |
* When the operation is finished, @callback will be invoked in the <link linkend="g-main-context-push-thread-default">thread-default main loop</link> of the thread you are calling this method from. | |
* You can then call object_manager_client_new_for_bus_finish() to get the result of the operation. | |
* | |
* See object_manager_client_new_for_bus_sync() for the synchronous, blocking version of this constructor. | |
*/ | |
void | |
object_manager_client_new_for_bus ( | |
GBusType bus_type, | |
GDBusObjectManagerClientFlags flags, | |
const gchar *name, | |
const gchar *object_path, | |
GCancellable *cancellable, | |
GAsyncReadyCallback callback, | |
gpointer user_data) | |
{ | |
g_async_initable_new_async (TYPE_OBJECT_MANAGER_CLIENT, G_PRIORITY_DEFAULT, cancellable, callback, user_data, "flags", flags, "name", name, "bus-type", bus_type, "object-path", object_path, "get-proxy-type-func", object_manager_client_get_proxy_type, NULL); | |
} | |
/** | |
* object_manager_client_new_for_bus_finish: | |
* @res: The #GAsyncResult obtained from the #GAsyncReadyCallback passed to object_manager_client_new_for_bus(). | |
* @error: Return location for error or %NULL | |
* | |
* Finishes an operation started with object_manager_client_new_for_bus(). | |
* | |
* Returns: (transfer full) (type ObjectManagerClient): The constructed object manager client or %NULL if @error is set. | |
*/ | |
GDBusObjectManager * | |
object_manager_client_new_for_bus_finish ( | |
GAsyncResult *res, | |
GError **error) | |
{ | |
GObject *ret; | |
GObject *source_object; | |
source_object = g_async_result_get_source_object (res); | |
ret = g_async_initable_new_finish (G_ASYNC_INITABLE (source_object), res, error); | |
g_object_unref (source_object); | |
if (ret != NULL) | |
return G_DBUS_OBJECT_MANAGER (ret); | |
else | |
return NULL; | |
} | |
/** | |
* object_manager_client_new_for_bus_sync: | |
* @bus_type: A #GBusType. | |
* @flags: Flags from the #GDBusObjectManagerClientFlags enumeration. | |
* @name: A bus name (well-known or unique). | |
* @object_path: An object path. | |
* @cancellable: (allow-none): A #GCancellable or %NULL. | |
* @error: Return location for error or %NULL | |
* | |
* Like object_manager_client_new_sync() but takes a #GBusType instead of a #GDBusConnection. | |
* | |
* The calling thread is blocked until a reply is received. | |
* | |
* See object_manager_client_new_for_bus() for the asynchronous version of this constructor. | |
* | |
* Returns: (transfer full) (type ObjectManagerClient): The constructed object manager client or %NULL if @error is set. | |
*/ | |
GDBusObjectManager * | |
object_manager_client_new_for_bus_sync ( | |
GBusType bus_type, | |
GDBusObjectManagerClientFlags flags, | |
const gchar *name, | |
const gchar *object_path, | |
GCancellable *cancellable, | |
GError **error) | |
{ | |
GInitable *ret; | |
ret = g_initable_new (TYPE_OBJECT_MANAGER_CLIENT, cancellable, error, "flags", flags, "name", name, "bus-type", bus_type, "object-path", object_path, "get-proxy-type-func", object_manager_client_get_proxy_type, NULL); | |
if (ret != NULL) | |
return G_DBUS_OBJECT_MANAGER (ret); | |
else | |
return NULL; | |
} | |