| /* |
| * Generated by gdbus-codegen 2.40.2. DO NOT EDIT. |
| * |
| * The license of this code is the same as for the source it was derived from. |
| */ |
| |
| #ifdef HAVE_CONFIG_H |
| # include "config.h" |
| #endif |
| |
| #include "interfaces/control_host.h" |
| |
| #include <string.h> |
| #ifdef G_OS_UNIX |
| # include <gio/gunixfdlist.h> |
| #endif |
| |
| typedef struct |
| { |
| GDBusArgInfo parent_struct; |
| gboolean use_gvariant; |
| } _ExtendedGDBusArgInfo; |
| |
| typedef struct |
| { |
| GDBusMethodInfo parent_struct; |
| const gchar *signal_name; |
| gboolean pass_fdlist; |
| } _ExtendedGDBusMethodInfo; |
| |
| typedef struct |
| { |
| GDBusSignalInfo parent_struct; |
| const gchar *signal_name; |
| } _ExtendedGDBusSignalInfo; |
| |
| typedef struct |
| { |
| GDBusPropertyInfo parent_struct; |
| const gchar *hyphen_name; |
| gboolean use_gvariant; |
| } _ExtendedGDBusPropertyInfo; |
| |
| typedef struct |
| { |
| GDBusInterfaceInfo parent_struct; |
| const gchar *hyphen_name; |
| } _ExtendedGDBusInterfaceInfo; |
| |
| typedef struct |
| { |
| const _ExtendedGDBusPropertyInfo *info; |
| guint prop_id; |
| GValue orig_value; /* the value before the change */ |
| } ChangedProperty; |
| |
| static void |
| _changed_property_free (ChangedProperty *data) |
| { |
| g_value_unset (&data->orig_value); |
| g_free (data); |
| } |
| |
| static gboolean |
| _g_strv_equal0 (gchar **a, gchar **b) |
| { |
| gboolean ret = FALSE; |
| guint n; |
| if (a == NULL && b == NULL) |
| { |
| ret = TRUE; |
| goto out; |
| } |
| if (a == NULL || b == NULL) |
| goto out; |
| if (g_strv_length (a) != g_strv_length (b)) |
| goto out; |
| for (n = 0; a[n] != NULL; n++) |
| if (g_strcmp0 (a[n], b[n]) != 0) |
| goto out; |
| ret = TRUE; |
| out: |
| return ret; |
| } |
| |
| static gboolean |
| _g_variant_equal0 (GVariant *a, GVariant *b) |
| { |
| gboolean ret = FALSE; |
| if (a == NULL && b == NULL) |
| { |
| ret = TRUE; |
| goto out; |
| } |
| if (a == NULL || b == NULL) |
| goto out; |
| ret = g_variant_equal (a, b); |
| out: |
| return ret; |
| } |
| |
| G_GNUC_UNUSED static gboolean |
| _g_value_equal (const GValue *a, const GValue *b) |
| { |
| gboolean ret = FALSE; |
| g_assert (G_VALUE_TYPE (a) == G_VALUE_TYPE (b)); |
| switch (G_VALUE_TYPE (a)) |
| { |
| case G_TYPE_BOOLEAN: |
| ret = (g_value_get_boolean (a) == g_value_get_boolean (b)); |
| break; |
| case G_TYPE_UCHAR: |
| ret = (g_value_get_uchar (a) == g_value_get_uchar (b)); |
| break; |
| case G_TYPE_INT: |
| ret = (g_value_get_int (a) == g_value_get_int (b)); |
| break; |
| case G_TYPE_UINT: |
| ret = (g_value_get_uint (a) == g_value_get_uint (b)); |
| break; |
| case G_TYPE_INT64: |
| ret = (g_value_get_int64 (a) == g_value_get_int64 (b)); |
| break; |
| case G_TYPE_UINT64: |
| ret = (g_value_get_uint64 (a) == g_value_get_uint64 (b)); |
| break; |
| case G_TYPE_DOUBLE: |
| { |
| /* Avoid -Wfloat-equal warnings by doing a direct bit compare */ |
| gdouble da = g_value_get_double (a); |
| gdouble db = g_value_get_double (b); |
| ret = memcmp (&da, &db, sizeof (gdouble)) == 0; |
| } |
| break; |
| case G_TYPE_STRING: |
| ret = (g_strcmp0 (g_value_get_string (a), g_value_get_string (b)) == 0); |
| break; |
| case G_TYPE_VARIANT: |
| ret = _g_variant_equal0 (g_value_get_variant (a), g_value_get_variant (b)); |
| break; |
| default: |
| if (G_VALUE_TYPE (a) == G_TYPE_STRV) |
| ret = _g_strv_equal0 (g_value_get_boxed (a), g_value_get_boxed (b)); |
| else |
| g_critical ("_g_value_equal() does not handle type %s", g_type_name (G_VALUE_TYPE (a))); |
| break; |
| } |
| return ret; |
| } |
| |
| /* ------------------------------------------------------------------------ |
| * Code for interface org.openbmc.control.Host |
| * ------------------------------------------------------------------------ |
| */ |
| |
| /** |
| * SECTION:ControlHost |
| * @title: ControlHost |
| * @short_description: Generated C code for the org.openbmc.control.Host D-Bus interface |
| * |
| * This section contains code for working with the <link linkend="gdbus-interface-org-openbmc-control-Host.top_of_page">org.openbmc.control.Host</link> D-Bus interface in C. |
| */ |
| |
| /* ---- Introspection data for org.openbmc.control.Host ---- */ |
| |
| static const _ExtendedGDBusMethodInfo _control_host_method_info_boot = |
| { |
| { |
| -1, |
| (gchar *) "boot", |
| NULL, |
| NULL, |
| NULL |
| }, |
| "handle-boot", |
| FALSE |
| }; |
| |
| static const _ExtendedGDBusMethodInfo _control_host_method_info_shutdown = |
| { |
| { |
| -1, |
| (gchar *) "shutdown", |
| NULL, |
| NULL, |
| NULL |
| }, |
| "handle-shutdown", |
| FALSE |
| }; |
| |
| static const _ExtendedGDBusMethodInfo _control_host_method_info_reboot = |
| { |
| { |
| -1, |
| (gchar *) "reboot", |
| NULL, |
| NULL, |
| NULL |
| }, |
| "handle-reboot", |
| FALSE |
| }; |
| |
| static const _ExtendedGDBusMethodInfo * const _control_host_method_info_pointers[] = |
| { |
| &_control_host_method_info_boot, |
| &_control_host_method_info_shutdown, |
| &_control_host_method_info_reboot, |
| NULL |
| }; |
| |
| static const _ExtendedGDBusSignalInfo _control_host_signal_info_booted = |
| { |
| { |
| -1, |
| (gchar *) "Booted", |
| NULL, |
| NULL |
| }, |
| "booted" |
| }; |
| |
| static const _ExtendedGDBusSignalInfo * const _control_host_signal_info_pointers[] = |
| { |
| &_control_host_signal_info_booted, |
| NULL |
| }; |
| |
| static const _ExtendedGDBusInterfaceInfo _control_host_interface_info = |
| { |
| { |
| -1, |
| (gchar *) "org.openbmc.control.Host", |
| (GDBusMethodInfo **) &_control_host_method_info_pointers, |
| (GDBusSignalInfo **) &_control_host_signal_info_pointers, |
| NULL, |
| NULL |
| }, |
| "control-host", |
| }; |
| |
| |
| /** |
| * control_host_interface_info: |
| * |
| * Gets a machine-readable description of the <link linkend="gdbus-interface-org-openbmc-control-Host.top_of_page">org.openbmc.control.Host</link> D-Bus interface. |
| * |
| * Returns: (transfer none): A #GDBusInterfaceInfo. Do not free. |
| */ |
| GDBusInterfaceInfo * |
| control_host_interface_info (void) |
| { |
| return (GDBusInterfaceInfo *) &_control_host_interface_info.parent_struct; |
| } |
| |
| /** |
| * control_host_override_properties: |
| * @klass: The class structure for a #GObject<!-- -->-derived class. |
| * @property_id_begin: The property id to assign to the first overridden property. |
| * |
| * Overrides all #GObject properties in the #ControlHost interface for a concrete class. |
| * The properties are overridden in the order they are defined. |
| * |
| * Returns: The last property id. |
| */ |
| guint |
| control_host_override_properties (GObjectClass *klass, guint property_id_begin) |
| { |
| return property_id_begin - 1; |
| } |
| |
| |
| |
| /** |
| * ControlHost: |
| * |
| * Abstract interface type for the D-Bus interface <link linkend="gdbus-interface-org-openbmc-control-Host.top_of_page">org.openbmc.control.Host</link>. |
| */ |
| |
| /** |
| * ControlHostIface: |
| * @parent_iface: The parent interface. |
| * @handle_boot: Handler for the #ControlHost::handle-boot signal. |
| * @handle_reboot: Handler for the #ControlHost::handle-reboot signal. |
| * @handle_shutdown: Handler for the #ControlHost::handle-shutdown signal. |
| * @booted: Handler for the #ControlHost::booted signal. |
| * |
| * Virtual table for the D-Bus interface <link linkend="gdbus-interface-org-openbmc-control-Host.top_of_page">org.openbmc.control.Host</link>. |
| */ |
| |
| typedef ControlHostIface ControlHostInterface; |
| G_DEFINE_INTERFACE (ControlHost, control_host, G_TYPE_OBJECT); |
| |
| static void |
| control_host_default_init (ControlHostIface *iface) |
| { |
| /* GObject signals for incoming D-Bus method calls: */ |
| /** |
| * ControlHost::handle-boot: |
| * @object: A #ControlHost. |
| * @invocation: A #GDBusMethodInvocation. |
| * |
| * Signal emitted when a remote caller is invoking the <link linkend="gdbus-method-org-openbmc-control-Host.boot">boot()</link> D-Bus method. |
| * |
| * If a signal handler returns %TRUE, it means the signal handler will handle the invocation (e.g. take a reference to @invocation and eventually call control_host_complete_boot() or e.g. g_dbus_method_invocation_return_error() on it) and no order signal handlers will run. If no signal handler handles the invocation, the %G_DBUS_ERROR_UNKNOWN_METHOD error is returned. |
| * |
| * Returns: %TRUE if the invocation was handled, %FALSE to let other signal handlers run. |
| */ |
| g_signal_new ("handle-boot", |
| G_TYPE_FROM_INTERFACE (iface), |
| G_SIGNAL_RUN_LAST, |
| G_STRUCT_OFFSET (ControlHostIface, handle_boot), |
| g_signal_accumulator_true_handled, |
| NULL, |
| g_cclosure_marshal_generic, |
| G_TYPE_BOOLEAN, |
| 1, |
| G_TYPE_DBUS_METHOD_INVOCATION); |
| |
| /** |
| * ControlHost::handle-shutdown: |
| * @object: A #ControlHost. |
| * @invocation: A #GDBusMethodInvocation. |
| * |
| * Signal emitted when a remote caller is invoking the <link linkend="gdbus-method-org-openbmc-control-Host.shutdown">shutdown()</link> D-Bus method. |
| * |
| * If a signal handler returns %TRUE, it means the signal handler will handle the invocation (e.g. take a reference to @invocation and eventually call control_host_complete_shutdown() or e.g. g_dbus_method_invocation_return_error() on it) and no order signal handlers will run. If no signal handler handles the invocation, the %G_DBUS_ERROR_UNKNOWN_METHOD error is returned. |
| * |
| * Returns: %TRUE if the invocation was handled, %FALSE to let other signal handlers run. |
| */ |
| g_signal_new ("handle-shutdown", |
| G_TYPE_FROM_INTERFACE (iface), |
| G_SIGNAL_RUN_LAST, |
| G_STRUCT_OFFSET (ControlHostIface, handle_shutdown), |
| g_signal_accumulator_true_handled, |
| NULL, |
| g_cclosure_marshal_generic, |
| G_TYPE_BOOLEAN, |
| 1, |
| G_TYPE_DBUS_METHOD_INVOCATION); |
| |
| /** |
| * ControlHost::handle-reboot: |
| * @object: A #ControlHost. |
| * @invocation: A #GDBusMethodInvocation. |
| * |
| * Signal emitted when a remote caller is invoking the <link linkend="gdbus-method-org-openbmc-control-Host.reboot">reboot()</link> D-Bus method. |
| * |
| * If a signal handler returns %TRUE, it means the signal handler will handle the invocation (e.g. take a reference to @invocation and eventually call control_host_complete_reboot() or e.g. g_dbus_method_invocation_return_error() on it) and no order signal handlers will run. If no signal handler handles the invocation, the %G_DBUS_ERROR_UNKNOWN_METHOD error is returned. |
| * |
| * Returns: %TRUE if the invocation was handled, %FALSE to let other signal handlers run. |
| */ |
| g_signal_new ("handle-reboot", |
| G_TYPE_FROM_INTERFACE (iface), |
| G_SIGNAL_RUN_LAST, |
| G_STRUCT_OFFSET (ControlHostIface, handle_reboot), |
| g_signal_accumulator_true_handled, |
| NULL, |
| g_cclosure_marshal_generic, |
| G_TYPE_BOOLEAN, |
| 1, |
| G_TYPE_DBUS_METHOD_INVOCATION); |
| |
| /* GObject signals for received D-Bus signals: */ |
| /** |
| * ControlHost::booted: |
| * @object: A #ControlHost. |
| * |
| * On the client-side, this signal is emitted whenever the D-Bus signal <link linkend="gdbus-signal-org-openbmc-control-Host.Booted">"Booted"</link> is received. |
| * |
| * On the service-side, this signal can be used with e.g. g_signal_emit_by_name() to make the object emit the D-Bus signal. |
| */ |
| g_signal_new ("booted", |
| G_TYPE_FROM_INTERFACE (iface), |
| G_SIGNAL_RUN_LAST, |
| G_STRUCT_OFFSET (ControlHostIface, booted), |
| NULL, |
| NULL, |
| g_cclosure_marshal_generic, |
| G_TYPE_NONE, |
| 0); |
| |
| } |
| |
| /** |
| * control_host_emit_booted: |
| * @object: A #ControlHost. |
| * |
| * Emits the <link linkend="gdbus-signal-org-openbmc-control-Host.Booted">"Booted"</link> D-Bus signal. |
| */ |
| void |
| control_host_emit_booted ( |
| ControlHost *object) |
| { |
| g_signal_emit_by_name (object, "booted"); |
| } |
| |
| /** |
| * control_host_call_boot: |
| * @proxy: A #ControlHostProxy. |
| * @cancellable: (allow-none): A #GCancellable or %NULL. |
| * @callback: A #GAsyncReadyCallback to call when the request is satisfied or %NULL. |
| * @user_data: User data to pass to @callback. |
| * |
| * Asynchronously invokes the <link linkend="gdbus-method-org-openbmc-control-Host.boot">boot()</link> D-Bus method on @proxy. |
| * When the operation is finished, @callback will be invoked in the <link linkend="g-main-context-push-thread-default">thread-default main loop</link> of the thread you are calling this method from. |
| * You can then call control_host_call_boot_finish() to get the result of the operation. |
| * |
| * See control_host_call_boot_sync() for the synchronous, blocking version of this method. |
| */ |
| void |
| control_host_call_boot ( |
| ControlHost *proxy, |
| GCancellable *cancellable, |
| GAsyncReadyCallback callback, |
| gpointer user_data) |
| { |
| g_dbus_proxy_call (G_DBUS_PROXY (proxy), |
| "boot", |
| g_variant_new ("()"), |
| G_DBUS_CALL_FLAGS_NONE, |
| -1, |
| cancellable, |
| callback, |
| user_data); |
| } |
| |
| /** |
| * control_host_call_boot_finish: |
| * @proxy: A #ControlHostProxy. |
| * @res: The #GAsyncResult obtained from the #GAsyncReadyCallback passed to control_host_call_boot(). |
| * @error: Return location for error or %NULL. |
| * |
| * Finishes an operation started with control_host_call_boot(). |
| * |
| * Returns: (skip): %TRUE if the call succeded, %FALSE if @error is set. |
| */ |
| gboolean |
| control_host_call_boot_finish ( |
| ControlHost *proxy, |
| GAsyncResult *res, |
| GError **error) |
| { |
| GVariant *_ret; |
| _ret = g_dbus_proxy_call_finish (G_DBUS_PROXY (proxy), res, error); |
| if (_ret == NULL) |
| goto _out; |
| g_variant_get (_ret, |
| "()"); |
| g_variant_unref (_ret); |
| _out: |
| return _ret != NULL; |
| } |
| |
| /** |
| * control_host_call_boot_sync: |
| * @proxy: A #ControlHostProxy. |
| * @cancellable: (allow-none): A #GCancellable or %NULL. |
| * @error: Return location for error or %NULL. |
| * |
| * Synchronously invokes the <link linkend="gdbus-method-org-openbmc-control-Host.boot">boot()</link> D-Bus method on @proxy. The calling thread is blocked until a reply is received. |
| * |
| * See control_host_call_boot() for the asynchronous version of this method. |
| * |
| * Returns: (skip): %TRUE if the call succeded, %FALSE if @error is set. |
| */ |
| gboolean |
| control_host_call_boot_sync ( |
| ControlHost *proxy, |
| GCancellable *cancellable, |
| GError **error) |
| { |
| GVariant *_ret; |
| _ret = g_dbus_proxy_call_sync (G_DBUS_PROXY (proxy), |
| "boot", |
| g_variant_new ("()"), |
| G_DBUS_CALL_FLAGS_NONE, |
| -1, |
| cancellable, |
| error); |
| if (_ret == NULL) |
| goto _out; |
| g_variant_get (_ret, |
| "()"); |
| g_variant_unref (_ret); |
| _out: |
| return _ret != NULL; |
| } |
| |
| /** |
| * control_host_call_shutdown: |
| * @proxy: A #ControlHostProxy. |
| * @cancellable: (allow-none): A #GCancellable or %NULL. |
| * @callback: A #GAsyncReadyCallback to call when the request is satisfied or %NULL. |
| * @user_data: User data to pass to @callback. |
| * |
| * Asynchronously invokes the <link linkend="gdbus-method-org-openbmc-control-Host.shutdown">shutdown()</link> D-Bus method on @proxy. |
| * When the operation is finished, @callback will be invoked in the <link linkend="g-main-context-push-thread-default">thread-default main loop</link> of the thread you are calling this method from. |
| * You can then call control_host_call_shutdown_finish() to get the result of the operation. |
| * |
| * See control_host_call_shutdown_sync() for the synchronous, blocking version of this method. |
| */ |
| void |
| control_host_call_shutdown ( |
| ControlHost *proxy, |
| GCancellable *cancellable, |
| GAsyncReadyCallback callback, |
| gpointer user_data) |
| { |
| g_dbus_proxy_call (G_DBUS_PROXY (proxy), |
| "shutdown", |
| g_variant_new ("()"), |
| G_DBUS_CALL_FLAGS_NONE, |
| -1, |
| cancellable, |
| callback, |
| user_data); |
| } |
| |
| /** |
| * control_host_call_shutdown_finish: |
| * @proxy: A #ControlHostProxy. |
| * @res: The #GAsyncResult obtained from the #GAsyncReadyCallback passed to control_host_call_shutdown(). |
| * @error: Return location for error or %NULL. |
| * |
| * Finishes an operation started with control_host_call_shutdown(). |
| * |
| * Returns: (skip): %TRUE if the call succeded, %FALSE if @error is set. |
| */ |
| gboolean |
| control_host_call_shutdown_finish ( |
| ControlHost *proxy, |
| GAsyncResult *res, |
| GError **error) |
| { |
| GVariant *_ret; |
| _ret = g_dbus_proxy_call_finish (G_DBUS_PROXY (proxy), res, error); |
| if (_ret == NULL) |
| goto _out; |
| g_variant_get (_ret, |
| "()"); |
| g_variant_unref (_ret); |
| _out: |
| return _ret != NULL; |
| } |
| |
| /** |
| * control_host_call_shutdown_sync: |
| * @proxy: A #ControlHostProxy. |
| * @cancellable: (allow-none): A #GCancellable or %NULL. |
| * @error: Return location for error or %NULL. |
| * |
| * Synchronously invokes the <link linkend="gdbus-method-org-openbmc-control-Host.shutdown">shutdown()</link> D-Bus method on @proxy. The calling thread is blocked until a reply is received. |
| * |
| * See control_host_call_shutdown() for the asynchronous version of this method. |
| * |
| * Returns: (skip): %TRUE if the call succeded, %FALSE if @error is set. |
| */ |
| gboolean |
| control_host_call_shutdown_sync ( |
| ControlHost *proxy, |
| GCancellable *cancellable, |
| GError **error) |
| { |
| GVariant *_ret; |
| _ret = g_dbus_proxy_call_sync (G_DBUS_PROXY (proxy), |
| "shutdown", |
| g_variant_new ("()"), |
| G_DBUS_CALL_FLAGS_NONE, |
| -1, |
| cancellable, |
| error); |
| if (_ret == NULL) |
| goto _out; |
| g_variant_get (_ret, |
| "()"); |
| g_variant_unref (_ret); |
| _out: |
| return _ret != NULL; |
| } |
| |
| /** |
| * control_host_call_reboot: |
| * @proxy: A #ControlHostProxy. |
| * @cancellable: (allow-none): A #GCancellable or %NULL. |
| * @callback: A #GAsyncReadyCallback to call when the request is satisfied or %NULL. |
| * @user_data: User data to pass to @callback. |
| * |
| * Asynchronously invokes the <link linkend="gdbus-method-org-openbmc-control-Host.reboot">reboot()</link> D-Bus method on @proxy. |
| * When the operation is finished, @callback will be invoked in the <link linkend="g-main-context-push-thread-default">thread-default main loop</link> of the thread you are calling this method from. |
| * You can then call control_host_call_reboot_finish() to get the result of the operation. |
| * |
| * See control_host_call_reboot_sync() for the synchronous, blocking version of this method. |
| */ |
| void |
| control_host_call_reboot ( |
| ControlHost *proxy, |
| GCancellable *cancellable, |
| GAsyncReadyCallback callback, |
| gpointer user_data) |
| { |
| g_dbus_proxy_call (G_DBUS_PROXY (proxy), |
| "reboot", |
| g_variant_new ("()"), |
| G_DBUS_CALL_FLAGS_NONE, |
| -1, |
| cancellable, |
| callback, |
| user_data); |
| } |
| |
| /** |
| * control_host_call_reboot_finish: |
| * @proxy: A #ControlHostProxy. |
| * @res: The #GAsyncResult obtained from the #GAsyncReadyCallback passed to control_host_call_reboot(). |
| * @error: Return location for error or %NULL. |
| * |
| * Finishes an operation started with control_host_call_reboot(). |
| * |
| * Returns: (skip): %TRUE if the call succeded, %FALSE if @error is set. |
| */ |
| gboolean |
| control_host_call_reboot_finish ( |
| ControlHost *proxy, |
| GAsyncResult *res, |
| GError **error) |
| { |
| GVariant *_ret; |
| _ret = g_dbus_proxy_call_finish (G_DBUS_PROXY (proxy), res, error); |
| if (_ret == NULL) |
| goto _out; |
| g_variant_get (_ret, |
| "()"); |
| g_variant_unref (_ret); |
| _out: |
| return _ret != NULL; |
| } |
| |
| /** |
| * control_host_call_reboot_sync: |
| * @proxy: A #ControlHostProxy. |
| * @cancellable: (allow-none): A #GCancellable or %NULL. |
| * @error: Return location for error or %NULL. |
| * |
| * Synchronously invokes the <link linkend="gdbus-method-org-openbmc-control-Host.reboot">reboot()</link> D-Bus method on @proxy. The calling thread is blocked until a reply is received. |
| * |
| * See control_host_call_reboot() for the asynchronous version of this method. |
| * |
| * Returns: (skip): %TRUE if the call succeded, %FALSE if @error is set. |
| */ |
| gboolean |
| control_host_call_reboot_sync ( |
| ControlHost *proxy, |
| GCancellable *cancellable, |
| GError **error) |
| { |
| GVariant *_ret; |
| _ret = g_dbus_proxy_call_sync (G_DBUS_PROXY (proxy), |
| "reboot", |
| g_variant_new ("()"), |
| G_DBUS_CALL_FLAGS_NONE, |
| -1, |
| cancellable, |
| error); |
| if (_ret == NULL) |
| goto _out; |
| g_variant_get (_ret, |
| "()"); |
| g_variant_unref (_ret); |
| _out: |
| return _ret != NULL; |
| } |
| |
| /** |
| * control_host_complete_boot: |
| * @object: A #ControlHost. |
| * @invocation: (transfer full): A #GDBusMethodInvocation. |
| * |
| * Helper function used in service implementations to finish handling invocations of the <link linkend="gdbus-method-org-openbmc-control-Host.boot">boot()</link> D-Bus method. If you instead want to finish handling an invocation by returning an error, use g_dbus_method_invocation_return_error() or similar. |
| * |
| * This method will free @invocation, you cannot use it afterwards. |
| */ |
| void |
| control_host_complete_boot ( |
| ControlHost *object, |
| GDBusMethodInvocation *invocation) |
| { |
| g_dbus_method_invocation_return_value (invocation, |
| g_variant_new ("()")); |
| } |
| |
| /** |
| * control_host_complete_shutdown: |
| * @object: A #ControlHost. |
| * @invocation: (transfer full): A #GDBusMethodInvocation. |
| * |
| * Helper function used in service implementations to finish handling invocations of the <link linkend="gdbus-method-org-openbmc-control-Host.shutdown">shutdown()</link> D-Bus method. If you instead want to finish handling an invocation by returning an error, use g_dbus_method_invocation_return_error() or similar. |
| * |
| * This method will free @invocation, you cannot use it afterwards. |
| */ |
| void |
| control_host_complete_shutdown ( |
| ControlHost *object, |
| GDBusMethodInvocation *invocation) |
| { |
| g_dbus_method_invocation_return_value (invocation, |
| g_variant_new ("()")); |
| } |
| |
| /** |
| * control_host_complete_reboot: |
| * @object: A #ControlHost. |
| * @invocation: (transfer full): A #GDBusMethodInvocation. |
| * |
| * Helper function used in service implementations to finish handling invocations of the <link linkend="gdbus-method-org-openbmc-control-Host.reboot">reboot()</link> D-Bus method. If you instead want to finish handling an invocation by returning an error, use g_dbus_method_invocation_return_error() or similar. |
| * |
| * This method will free @invocation, you cannot use it afterwards. |
| */ |
| void |
| control_host_complete_reboot ( |
| ControlHost *object, |
| GDBusMethodInvocation *invocation) |
| { |
| g_dbus_method_invocation_return_value (invocation, |
| g_variant_new ("()")); |
| } |
| |
| /* ------------------------------------------------------------------------ */ |
| |
| /** |
| * ControlHostProxy: |
| * |
| * The #ControlHostProxy structure contains only private data and should only be accessed using the provided API. |
| */ |
| |
| /** |
| * ControlHostProxyClass: |
| * @parent_class: The parent class. |
| * |
| * Class structure for #ControlHostProxy. |
| */ |
| |
| struct _ControlHostProxyPrivate |
| { |
| GData *qdata; |
| }; |
| |
| static void control_host_proxy_iface_init (ControlHostIface *iface); |
| |
| #if GLIB_VERSION_MAX_ALLOWED >= GLIB_VERSION_2_38 |
| G_DEFINE_TYPE_WITH_CODE (ControlHostProxy, control_host_proxy, G_TYPE_DBUS_PROXY, |
| G_ADD_PRIVATE (ControlHostProxy) |
| G_IMPLEMENT_INTERFACE (TYPE_CONTROL_HOST, control_host_proxy_iface_init)); |
| |
| #else |
| G_DEFINE_TYPE_WITH_CODE (ControlHostProxy, control_host_proxy, G_TYPE_DBUS_PROXY, |
| G_IMPLEMENT_INTERFACE (TYPE_CONTROL_HOST, control_host_proxy_iface_init)); |
| |
| #endif |
| static void |
| control_host_proxy_finalize (GObject *object) |
| { |
| ControlHostProxy *proxy = CONTROL_HOST_PROXY (object); |
| g_datalist_clear (&proxy->priv->qdata); |
| G_OBJECT_CLASS (control_host_proxy_parent_class)->finalize (object); |
| } |
| |
| static void |
| control_host_proxy_get_property (GObject *object, |
| guint prop_id, |
| GValue *value, |
| GParamSpec *pspec G_GNUC_UNUSED) |
| { |
| } |
| |
| static void |
| control_host_proxy_set_property (GObject *object, |
| guint prop_id, |
| const GValue *value, |
| GParamSpec *pspec G_GNUC_UNUSED) |
| { |
| } |
| |
| static void |
| control_host_proxy_g_signal (GDBusProxy *proxy, |
| const gchar *sender_name G_GNUC_UNUSED, |
| const gchar *signal_name, |
| GVariant *parameters) |
| { |
| _ExtendedGDBusSignalInfo *info; |
| GVariantIter iter; |
| GVariant *child; |
| GValue *paramv; |
| guint num_params; |
| guint n; |
| guint signal_id; |
| info = (_ExtendedGDBusSignalInfo *) g_dbus_interface_info_lookup_signal ((GDBusInterfaceInfo *) &_control_host_interface_info.parent_struct, signal_name); |
| if (info == NULL) |
| return; |
| num_params = g_variant_n_children (parameters); |
| paramv = g_new0 (GValue, num_params + 1); |
| g_value_init (¶mv[0], TYPE_CONTROL_HOST); |
| g_value_set_object (¶mv[0], proxy); |
| g_variant_iter_init (&iter, parameters); |
| n = 1; |
| while ((child = g_variant_iter_next_value (&iter)) != NULL) |
| { |
| _ExtendedGDBusArgInfo *arg_info = (_ExtendedGDBusArgInfo *) info->parent_struct.args[n - 1]; |
| if (arg_info->use_gvariant) |
| { |
| g_value_init (¶mv[n], G_TYPE_VARIANT); |
| g_value_set_variant (¶mv[n], child); |
| n++; |
| } |
| else |
| g_dbus_gvariant_to_gvalue (child, ¶mv[n++]); |
| g_variant_unref (child); |
| } |
| signal_id = g_signal_lookup (info->signal_name, TYPE_CONTROL_HOST); |
| g_signal_emitv (paramv, signal_id, 0, NULL); |
| for (n = 0; n < num_params + 1; n++) |
| g_value_unset (¶mv[n]); |
| g_free (paramv); |
| } |
| |
| static void |
| control_host_proxy_g_properties_changed (GDBusProxy *_proxy, |
| GVariant *changed_properties, |
| const gchar *const *invalidated_properties) |
| { |
| ControlHostProxy *proxy = CONTROL_HOST_PROXY (_proxy); |
| guint n; |
| const gchar *key; |
| GVariantIter *iter; |
| _ExtendedGDBusPropertyInfo *info; |
| g_variant_get (changed_properties, "a{sv}", &iter); |
| while (g_variant_iter_next (iter, "{&sv}", &key, NULL)) |
| { |
| info = (_ExtendedGDBusPropertyInfo *) g_dbus_interface_info_lookup_property ((GDBusInterfaceInfo *) &_control_host_interface_info.parent_struct, key); |
| g_datalist_remove_data (&proxy->priv->qdata, key); |
| if (info != NULL) |
| g_object_notify (G_OBJECT (proxy), info->hyphen_name); |
| } |
| g_variant_iter_free (iter); |
| for (n = 0; invalidated_properties[n] != NULL; n++) |
| { |
| info = (_ExtendedGDBusPropertyInfo *) g_dbus_interface_info_lookup_property ((GDBusInterfaceInfo *) &_control_host_interface_info.parent_struct, invalidated_properties[n]); |
| g_datalist_remove_data (&proxy->priv->qdata, invalidated_properties[n]); |
| if (info != NULL) |
| g_object_notify (G_OBJECT (proxy), info->hyphen_name); |
| } |
| } |
| |
| static void |
| control_host_proxy_init (ControlHostProxy *proxy) |
| { |
| #if GLIB_VERSION_MAX_ALLOWED >= GLIB_VERSION_2_38 |
| proxy->priv = control_host_proxy_get_instance_private (proxy); |
| #else |
| proxy->priv = G_TYPE_INSTANCE_GET_PRIVATE (proxy, TYPE_CONTROL_HOST_PROXY, ControlHostProxyPrivate); |
| #endif |
| |
| g_dbus_proxy_set_interface_info (G_DBUS_PROXY (proxy), control_host_interface_info ()); |
| } |
| |
| static void |
| control_host_proxy_class_init (ControlHostProxyClass *klass) |
| { |
| GObjectClass *gobject_class; |
| GDBusProxyClass *proxy_class; |
| |
| gobject_class = G_OBJECT_CLASS (klass); |
| gobject_class->finalize = control_host_proxy_finalize; |
| gobject_class->get_property = control_host_proxy_get_property; |
| gobject_class->set_property = control_host_proxy_set_property; |
| |
| proxy_class = G_DBUS_PROXY_CLASS (klass); |
| proxy_class->g_signal = control_host_proxy_g_signal; |
| proxy_class->g_properties_changed = control_host_proxy_g_properties_changed; |
| |
| #if GLIB_VERSION_MAX_ALLOWED < GLIB_VERSION_2_38 |
| g_type_class_add_private (klass, sizeof (ControlHostProxyPrivate)); |
| #endif |
| } |
| |
| static void |
| control_host_proxy_iface_init (ControlHostIface *iface) |
| { |
| } |
| |
| /** |
| * control_host_proxy_new: |
| * @connection: A #GDBusConnection. |
| * @flags: Flags from the #GDBusProxyFlags enumeration. |
| * @name: (allow-none): A bus name (well-known or unique) or %NULL if @connection is not a message bus connection. |
| * @object_path: An object path. |
| * @cancellable: (allow-none): A #GCancellable or %NULL. |
| * @callback: A #GAsyncReadyCallback to call when the request is satisfied. |
| * @user_data: User data to pass to @callback. |
| * |
| * Asynchronously creates a proxy for the D-Bus interface <link linkend="gdbus-interface-org-openbmc-control-Host.top_of_page">org.openbmc.control.Host</link>. See g_dbus_proxy_new() for more details. |
| * |
| * When the operation is finished, @callback will be invoked in the <link linkend="g-main-context-push-thread-default">thread-default main loop</link> of the thread you are calling this method from. |
| * You can then call control_host_proxy_new_finish() to get the result of the operation. |
| * |
| * See control_host_proxy_new_sync() for the synchronous, blocking version of this constructor. |
| */ |
| void |
| control_host_proxy_new ( |
| GDBusConnection *connection, |
| GDBusProxyFlags flags, |
| const gchar *name, |
| const gchar *object_path, |
| GCancellable *cancellable, |
| GAsyncReadyCallback callback, |
| gpointer user_data) |
| { |
| g_async_initable_new_async (TYPE_CONTROL_HOST_PROXY, G_PRIORITY_DEFAULT, cancellable, callback, user_data, "g-flags", flags, "g-name", name, "g-connection", connection, "g-object-path", object_path, "g-interface-name", "org.openbmc.control.Host", NULL); |
| } |
| |
| /** |
| * control_host_proxy_new_finish: |
| * @res: The #GAsyncResult obtained from the #GAsyncReadyCallback passed to control_host_proxy_new(). |
| * @error: Return location for error or %NULL |
| * |
| * Finishes an operation started with control_host_proxy_new(). |
| * |
| * Returns: (transfer full) (type ControlHostProxy): The constructed proxy object or %NULL if @error is set. |
| */ |
| ControlHost * |
| control_host_proxy_new_finish ( |
| GAsyncResult *res, |
| GError **error) |
| { |
| GObject *ret; |
| GObject *source_object; |
| source_object = g_async_result_get_source_object (res); |
| ret = g_async_initable_new_finish (G_ASYNC_INITABLE (source_object), res, error); |
| g_object_unref (source_object); |
| if (ret != NULL) |
| return CONTROL_HOST (ret); |
| else |
| return NULL; |
| } |
| |
| /** |
| * control_host_proxy_new_sync: |
| * @connection: A #GDBusConnection. |
| * @flags: Flags from the #GDBusProxyFlags enumeration. |
| * @name: (allow-none): A bus name (well-known or unique) or %NULL if @connection is not a message bus connection. |
| * @object_path: An object path. |
| * @cancellable: (allow-none): A #GCancellable or %NULL. |
| * @error: Return location for error or %NULL |
| * |
| * Synchronously creates a proxy for the D-Bus interface <link linkend="gdbus-interface-org-openbmc-control-Host.top_of_page">org.openbmc.control.Host</link>. See g_dbus_proxy_new_sync() for more details. |
| * |
| * The calling thread is blocked until a reply is received. |
| * |
| * See control_host_proxy_new() for the asynchronous version of this constructor. |
| * |
| * Returns: (transfer full) (type ControlHostProxy): The constructed proxy object or %NULL if @error is set. |
| */ |
| ControlHost * |
| control_host_proxy_new_sync ( |
| GDBusConnection *connection, |
| GDBusProxyFlags flags, |
| const gchar *name, |
| const gchar *object_path, |
| GCancellable *cancellable, |
| GError **error) |
| { |
| GInitable *ret; |
| ret = g_initable_new (TYPE_CONTROL_HOST_PROXY, cancellable, error, "g-flags", flags, "g-name", name, "g-connection", connection, "g-object-path", object_path, "g-interface-name", "org.openbmc.control.Host", NULL); |
| if (ret != NULL) |
| return CONTROL_HOST (ret); |
| else |
| return NULL; |
| } |
| |
| |
| /** |
| * control_host_proxy_new_for_bus: |
| * @bus_type: A #GBusType. |
| * @flags: Flags from the #GDBusProxyFlags enumeration. |
| * @name: A bus name (well-known or unique). |
| * @object_path: An object path. |
| * @cancellable: (allow-none): A #GCancellable or %NULL. |
| * @callback: A #GAsyncReadyCallback to call when the request is satisfied. |
| * @user_data: User data to pass to @callback. |
| * |
| * Like control_host_proxy_new() but takes a #GBusType instead of a #GDBusConnection. |
| * |
| * When the operation is finished, @callback will be invoked in the <link linkend="g-main-context-push-thread-default">thread-default main loop</link> of the thread you are calling this method from. |
| * You can then call control_host_proxy_new_for_bus_finish() to get the result of the operation. |
| * |
| * See control_host_proxy_new_for_bus_sync() for the synchronous, blocking version of this constructor. |
| */ |
| void |
| control_host_proxy_new_for_bus ( |
| GBusType bus_type, |
| GDBusProxyFlags flags, |
| const gchar *name, |
| const gchar *object_path, |
| GCancellable *cancellable, |
| GAsyncReadyCallback callback, |
| gpointer user_data) |
| { |
| g_async_initable_new_async (TYPE_CONTROL_HOST_PROXY, G_PRIORITY_DEFAULT, cancellable, callback, user_data, "g-flags", flags, "g-name", name, "g-bus-type", bus_type, "g-object-path", object_path, "g-interface-name", "org.openbmc.control.Host", NULL); |
| } |
| |
| /** |
| * control_host_proxy_new_for_bus_finish: |
| * @res: The #GAsyncResult obtained from the #GAsyncReadyCallback passed to control_host_proxy_new_for_bus(). |
| * @error: Return location for error or %NULL |
| * |
| * Finishes an operation started with control_host_proxy_new_for_bus(). |
| * |
| * Returns: (transfer full) (type ControlHostProxy): The constructed proxy object or %NULL if @error is set. |
| */ |
| ControlHost * |
| control_host_proxy_new_for_bus_finish ( |
| GAsyncResult *res, |
| GError **error) |
| { |
| GObject *ret; |
| GObject *source_object; |
| source_object = g_async_result_get_source_object (res); |
| ret = g_async_initable_new_finish (G_ASYNC_INITABLE (source_object), res, error); |
| g_object_unref (source_object); |
| if (ret != NULL) |
| return CONTROL_HOST (ret); |
| else |
| return NULL; |
| } |
| |
| /** |
| * control_host_proxy_new_for_bus_sync: |
| * @bus_type: A #GBusType. |
| * @flags: Flags from the #GDBusProxyFlags enumeration. |
| * @name: A bus name (well-known or unique). |
| * @object_path: An object path. |
| * @cancellable: (allow-none): A #GCancellable or %NULL. |
| * @error: Return location for error or %NULL |
| * |
| * Like control_host_proxy_new_sync() but takes a #GBusType instead of a #GDBusConnection. |
| * |
| * The calling thread is blocked until a reply is received. |
| * |
| * See control_host_proxy_new_for_bus() for the asynchronous version of this constructor. |
| * |
| * Returns: (transfer full) (type ControlHostProxy): The constructed proxy object or %NULL if @error is set. |
| */ |
| ControlHost * |
| control_host_proxy_new_for_bus_sync ( |
| GBusType bus_type, |
| GDBusProxyFlags flags, |
| const gchar *name, |
| const gchar *object_path, |
| GCancellable *cancellable, |
| GError **error) |
| { |
| GInitable *ret; |
| ret = g_initable_new (TYPE_CONTROL_HOST_PROXY, cancellable, error, "g-flags", flags, "g-name", name, "g-bus-type", bus_type, "g-object-path", object_path, "g-interface-name", "org.openbmc.control.Host", NULL); |
| if (ret != NULL) |
| return CONTROL_HOST (ret); |
| else |
| return NULL; |
| } |
| |
| |
| /* ------------------------------------------------------------------------ */ |
| |
| /** |
| * ControlHostSkeleton: |
| * |
| * The #ControlHostSkeleton structure contains only private data and should only be accessed using the provided API. |
| */ |
| |
| /** |
| * ControlHostSkeletonClass: |
| * @parent_class: The parent class. |
| * |
| * Class structure for #ControlHostSkeleton. |
| */ |
| |
| struct _ControlHostSkeletonPrivate |
| { |
| GValue *properties; |
| GList *changed_properties; |
| GSource *changed_properties_idle_source; |
| GMainContext *context; |
| GMutex lock; |
| }; |
| |
| static void |
| _control_host_skeleton_handle_method_call ( |
| GDBusConnection *connection G_GNUC_UNUSED, |
| const gchar *sender G_GNUC_UNUSED, |
| const gchar *object_path G_GNUC_UNUSED, |
| const gchar *interface_name, |
| const gchar *method_name, |
| GVariant *parameters, |
| GDBusMethodInvocation *invocation, |
| gpointer user_data) |
| { |
| ControlHostSkeleton *skeleton = CONTROL_HOST_SKELETON (user_data); |
| _ExtendedGDBusMethodInfo *info; |
| GVariantIter iter; |
| GVariant *child; |
| GValue *paramv; |
| guint num_params; |
| guint num_extra; |
| guint n; |
| guint signal_id; |
| GValue return_value = G_VALUE_INIT; |
| info = (_ExtendedGDBusMethodInfo *) g_dbus_method_invocation_get_method_info (invocation); |
| g_assert (info != NULL); |
| num_params = g_variant_n_children (parameters); |
| num_extra = info->pass_fdlist ? 3 : 2; paramv = g_new0 (GValue, num_params + num_extra); |
| n = 0; |
| g_value_init (¶mv[n], TYPE_CONTROL_HOST); |
| g_value_set_object (¶mv[n++], skeleton); |
| g_value_init (¶mv[n], G_TYPE_DBUS_METHOD_INVOCATION); |
| g_value_set_object (¶mv[n++], invocation); |
| if (info->pass_fdlist) |
| { |
| #ifdef G_OS_UNIX |
| g_value_init (¶mv[n], G_TYPE_UNIX_FD_LIST); |
| g_value_set_object (¶mv[n++], g_dbus_message_get_unix_fd_list (g_dbus_method_invocation_get_message (invocation))); |
| #else |
| g_assert_not_reached (); |
| #endif |
| } |
| g_variant_iter_init (&iter, parameters); |
| while ((child = g_variant_iter_next_value (&iter)) != NULL) |
| { |
| _ExtendedGDBusArgInfo *arg_info = (_ExtendedGDBusArgInfo *) info->parent_struct.in_args[n - num_extra]; |
| if (arg_info->use_gvariant) |
| { |
| g_value_init (¶mv[n], G_TYPE_VARIANT); |
| g_value_set_variant (¶mv[n], child); |
| n++; |
| } |
| else |
| g_dbus_gvariant_to_gvalue (child, ¶mv[n++]); |
| g_variant_unref (child); |
| } |
| signal_id = g_signal_lookup (info->signal_name, TYPE_CONTROL_HOST); |
| g_value_init (&return_value, G_TYPE_BOOLEAN); |
| g_signal_emitv (paramv, signal_id, 0, &return_value); |
| if (!g_value_get_boolean (&return_value)) |
| g_dbus_method_invocation_return_error (invocation, G_DBUS_ERROR, G_DBUS_ERROR_UNKNOWN_METHOD, "Method %s is not implemented on interface %s", method_name, interface_name); |
| g_value_unset (&return_value); |
| for (n = 0; n < num_params + num_extra; n++) |
| g_value_unset (¶mv[n]); |
| g_free (paramv); |
| } |
| |
| static GVariant * |
| _control_host_skeleton_handle_get_property ( |
| GDBusConnection *connection G_GNUC_UNUSED, |
| const gchar *sender G_GNUC_UNUSED, |
| const gchar *object_path G_GNUC_UNUSED, |
| const gchar *interface_name G_GNUC_UNUSED, |
| const gchar *property_name, |
| GError **error, |
| gpointer user_data) |
| { |
| ControlHostSkeleton *skeleton = CONTROL_HOST_SKELETON (user_data); |
| GValue value = G_VALUE_INIT; |
| GParamSpec *pspec; |
| _ExtendedGDBusPropertyInfo *info; |
| GVariant *ret; |
| ret = NULL; |
| info = (_ExtendedGDBusPropertyInfo *) g_dbus_interface_info_lookup_property ((GDBusInterfaceInfo *) &_control_host_interface_info.parent_struct, property_name); |
| g_assert (info != NULL); |
| pspec = g_object_class_find_property (G_OBJECT_GET_CLASS (skeleton), info->hyphen_name); |
| if (pspec == NULL) |
| { |
| g_set_error (error, G_DBUS_ERROR, G_DBUS_ERROR_INVALID_ARGS, "No property with name %s", property_name); |
| } |
| else |
| { |
| g_value_init (&value, pspec->value_type); |
| g_object_get_property (G_OBJECT (skeleton), info->hyphen_name, &value); |
| ret = g_dbus_gvalue_to_gvariant (&value, G_VARIANT_TYPE (info->parent_struct.signature)); |
| g_value_unset (&value); |
| } |
| return ret; |
| } |
| |
| static gboolean |
| _control_host_skeleton_handle_set_property ( |
| GDBusConnection *connection G_GNUC_UNUSED, |
| const gchar *sender G_GNUC_UNUSED, |
| const gchar *object_path G_GNUC_UNUSED, |
| const gchar *interface_name G_GNUC_UNUSED, |
| const gchar *property_name, |
| GVariant *variant, |
| GError **error, |
| gpointer user_data) |
| { |
| ControlHostSkeleton *skeleton = CONTROL_HOST_SKELETON (user_data); |
| GValue value = G_VALUE_INIT; |
| GParamSpec *pspec; |
| _ExtendedGDBusPropertyInfo *info; |
| gboolean ret; |
| ret = FALSE; |
| info = (_ExtendedGDBusPropertyInfo *) g_dbus_interface_info_lookup_property ((GDBusInterfaceInfo *) &_control_host_interface_info.parent_struct, property_name); |
| g_assert (info != NULL); |
| pspec = g_object_class_find_property (G_OBJECT_GET_CLASS (skeleton), info->hyphen_name); |
| if (pspec == NULL) |
| { |
| g_set_error (error, G_DBUS_ERROR, G_DBUS_ERROR_INVALID_ARGS, "No property with name %s", property_name); |
| } |
| else |
| { |
| if (info->use_gvariant) |
| g_value_set_variant (&value, variant); |
| else |
| g_dbus_gvariant_to_gvalue (variant, &value); |
| g_object_set_property (G_OBJECT (skeleton), info->hyphen_name, &value); |
| g_value_unset (&value); |
| ret = TRUE; |
| } |
| return ret; |
| } |
| |
| static const GDBusInterfaceVTable _control_host_skeleton_vtable = |
| { |
| _control_host_skeleton_handle_method_call, |
| _control_host_skeleton_handle_get_property, |
| _control_host_skeleton_handle_set_property, |
| {NULL} |
| }; |
| |
| static GDBusInterfaceInfo * |
| control_host_skeleton_dbus_interface_get_info (GDBusInterfaceSkeleton *skeleton G_GNUC_UNUSED) |
| { |
| return control_host_interface_info (); |
| } |
| |
| static GDBusInterfaceVTable * |
| control_host_skeleton_dbus_interface_get_vtable (GDBusInterfaceSkeleton *skeleton G_GNUC_UNUSED) |
| { |
| return (GDBusInterfaceVTable *) &_control_host_skeleton_vtable; |
| } |
| |
| static GVariant * |
| control_host_skeleton_dbus_interface_get_properties (GDBusInterfaceSkeleton *_skeleton) |
| { |
| ControlHostSkeleton *skeleton = CONTROL_HOST_SKELETON (_skeleton); |
| |
| GVariantBuilder builder; |
| guint n; |
| g_variant_builder_init (&builder, G_VARIANT_TYPE ("a{sv}")); |
| if (_control_host_interface_info.parent_struct.properties == NULL) |
| goto out; |
| for (n = 0; _control_host_interface_info.parent_struct.properties[n] != NULL; n++) |
| { |
| GDBusPropertyInfo *info = _control_host_interface_info.parent_struct.properties[n]; |
| if (info->flags & G_DBUS_PROPERTY_INFO_FLAGS_READABLE) |
| { |
| GVariant *value; |
| value = _control_host_skeleton_handle_get_property (g_dbus_interface_skeleton_get_connection (G_DBUS_INTERFACE_SKELETON (skeleton)), NULL, g_dbus_interface_skeleton_get_object_path (G_DBUS_INTERFACE_SKELETON (skeleton)), "org.openbmc.control.Host", info->name, NULL, skeleton); |
| if (value != NULL) |
| { |
| g_variant_take_ref (value); |
| g_variant_builder_add (&builder, "{sv}", info->name, value); |
| g_variant_unref (value); |
| } |
| } |
| } |
| out: |
| return g_variant_builder_end (&builder); |
| } |
| |
| static void |
| control_host_skeleton_dbus_interface_flush (GDBusInterfaceSkeleton *_skeleton) |
| { |
| } |
| |
| static void |
| _control_host_on_signal_booted ( |
| ControlHost *object) |
| { |
| ControlHostSkeleton *skeleton = CONTROL_HOST_SKELETON (object); |
| |
| GList *connections, *l; |
| GVariant *signal_variant; |
| connections = g_dbus_interface_skeleton_get_connections (G_DBUS_INTERFACE_SKELETON (skeleton)); |
| |
| signal_variant = g_variant_ref_sink (g_variant_new ("()")); |
| for (l = connections; l != NULL; l = l->next) |
| { |
| GDBusConnection *connection = l->data; |
| g_dbus_connection_emit_signal (connection, |
| NULL, g_dbus_interface_skeleton_get_object_path (G_DBUS_INTERFACE_SKELETON (skeleton)), "org.openbmc.control.Host", "Booted", |
| signal_variant, NULL); |
| } |
| g_variant_unref (signal_variant); |
| g_list_free_full (connections, g_object_unref); |
| } |
| |
| static void control_host_skeleton_iface_init (ControlHostIface *iface); |
| #if GLIB_VERSION_MAX_ALLOWED >= GLIB_VERSION_2_38 |
| G_DEFINE_TYPE_WITH_CODE (ControlHostSkeleton, control_host_skeleton, G_TYPE_DBUS_INTERFACE_SKELETON, |
| G_ADD_PRIVATE (ControlHostSkeleton) |
| G_IMPLEMENT_INTERFACE (TYPE_CONTROL_HOST, control_host_skeleton_iface_init)); |
| |
| #else |
| G_DEFINE_TYPE_WITH_CODE (ControlHostSkeleton, control_host_skeleton, G_TYPE_DBUS_INTERFACE_SKELETON, |
| G_IMPLEMENT_INTERFACE (TYPE_CONTROL_HOST, control_host_skeleton_iface_init)); |
| |
| #endif |
| static void |
| control_host_skeleton_finalize (GObject *object) |
| { |
| ControlHostSkeleton *skeleton = CONTROL_HOST_SKELETON (object); |
| g_list_free_full (skeleton->priv->changed_properties, (GDestroyNotify) _changed_property_free); |
| if (skeleton->priv->changed_properties_idle_source != NULL) |
| g_source_destroy (skeleton->priv->changed_properties_idle_source); |
| g_main_context_unref (skeleton->priv->context); |
| g_mutex_clear (&skeleton->priv->lock); |
| G_OBJECT_CLASS (control_host_skeleton_parent_class)->finalize (object); |
| } |
| |
| static void |
| control_host_skeleton_init (ControlHostSkeleton *skeleton) |
| { |
| #if GLIB_VERSION_MAX_ALLOWED >= GLIB_VERSION_2_38 |
| skeleton->priv = control_host_skeleton_get_instance_private (skeleton); |
| #else |
| skeleton->priv = G_TYPE_INSTANCE_GET_PRIVATE (skeleton, TYPE_CONTROL_HOST_SKELETON, ControlHostSkeletonPrivate); |
| #endif |
| |
| g_mutex_init (&skeleton->priv->lock); |
| skeleton->priv->context = g_main_context_ref_thread_default (); |
| } |
| |
| static void |
| control_host_skeleton_class_init (ControlHostSkeletonClass *klass) |
| { |
| GObjectClass *gobject_class; |
| GDBusInterfaceSkeletonClass *skeleton_class; |
| |
| gobject_class = G_OBJECT_CLASS (klass); |
| gobject_class->finalize = control_host_skeleton_finalize; |
| |
| skeleton_class = G_DBUS_INTERFACE_SKELETON_CLASS (klass); |
| skeleton_class->get_info = control_host_skeleton_dbus_interface_get_info; |
| skeleton_class->get_properties = control_host_skeleton_dbus_interface_get_properties; |
| skeleton_class->flush = control_host_skeleton_dbus_interface_flush; |
| skeleton_class->get_vtable = control_host_skeleton_dbus_interface_get_vtable; |
| |
| #if GLIB_VERSION_MAX_ALLOWED < GLIB_VERSION_2_38 |
| g_type_class_add_private (klass, sizeof (ControlHostSkeletonPrivate)); |
| #endif |
| } |
| |
| static void |
| control_host_skeleton_iface_init (ControlHostIface *iface) |
| { |
| iface->booted = _control_host_on_signal_booted; |
| } |
| |
| /** |
| * control_host_skeleton_new: |
| * |
| * Creates a skeleton object for the D-Bus interface <link linkend="gdbus-interface-org-openbmc-control-Host.top_of_page">org.openbmc.control.Host</link>. |
| * |
| * Returns: (transfer full) (type ControlHostSkeleton): The skeleton object. |
| */ |
| ControlHost * |
| control_host_skeleton_new (void) |
| { |
| return CONTROL_HOST (g_object_new (TYPE_CONTROL_HOST_SKELETON, NULL)); |
| } |
| |
| /* ------------------------------------------------------------------------ |
| * Code for Object, ObjectProxy and ObjectSkeleton |
| * ------------------------------------------------------------------------ |
| */ |
| |
| /** |
| * SECTION:Object |
| * @title: Object |
| * @short_description: Specialized GDBusObject types |
| * |
| * This section contains the #Object, #ObjectProxy, and #ObjectSkeleton types which make it easier to work with objects implementing generated types for D-Bus interfaces. |
| */ |
| |
| /** |
| * Object: |
| * |
| * The #Object type is a specialized container of interfaces. |
| */ |
| |
| /** |
| * ObjectIface: |
| * @parent_iface: The parent interface. |
| * |
| * Virtual table for the #Object interface. |
| */ |
| |
| typedef ObjectIface ObjectInterface; |
| G_DEFINE_INTERFACE_WITH_CODE (Object, object, G_TYPE_OBJECT, g_type_interface_add_prerequisite (g_define_type_id, G_TYPE_DBUS_OBJECT)); |
| |
| static void |
| object_default_init (ObjectIface *iface) |
| { |
| /** |
| * Object:control-host: |
| * |
| * The #ControlHost instance corresponding to the D-Bus interface <link linkend="gdbus-interface-org-openbmc-control-Host.top_of_page">org.openbmc.control.Host</link>, if any. |
| * |
| * Connect to the #GObject::notify signal to get informed of property changes. |
| */ |
| g_object_interface_install_property (iface, g_param_spec_object ("control-host", "control-host", "control-host", TYPE_CONTROL_HOST, G_PARAM_READWRITE|G_PARAM_STATIC_STRINGS)); |
| |
| } |
| |
| /** |
| * object_get_control_host: |
| * @object: A #Object. |
| * |
| * Gets the #ControlHost instance for the D-Bus interface <link linkend="gdbus-interface-org-openbmc-control-Host.top_of_page">org.openbmc.control.Host</link> on @object, if any. |
| * |
| * Returns: (transfer full): A #ControlHost that must be freed with g_object_unref() or %NULL if @object does not implement the interface. |
| */ |
| ControlHost *object_get_control_host (Object *object) |
| { |
| GDBusInterface *ret; |
| ret = g_dbus_object_get_interface (G_DBUS_OBJECT (object), "org.openbmc.control.Host"); |
| if (ret == NULL) |
| return NULL; |
| return CONTROL_HOST (ret); |
| } |
| |
| |
| /** |
| * object_peek_control_host: (skip) |
| * @object: A #Object. |
| * |
| * Like object_get_control_host() but doesn't increase the reference count on the returned object. |
| * |
| * <warning>It is not safe to use the returned object if you are on another thread than the one where the #GDBusObjectManagerClient or #GDBusObjectManagerServer for @object is running.</warning> |
| * |
| * Returns: (transfer none): A #ControlHost or %NULL if @object does not implement the interface. Do not free the returned object, it is owned by @object. |
| */ |
| ControlHost *object_peek_control_host (Object *object) |
| { |
| GDBusInterface *ret; |
| ret = g_dbus_object_get_interface (G_DBUS_OBJECT (object), "org.openbmc.control.Host"); |
| if (ret == NULL) |
| return NULL; |
| g_object_unref (ret); |
| return CONTROL_HOST (ret); |
| } |
| |
| |
| static void |
| object_notify (GDBusObject *object, GDBusInterface *interface) |
| { |
| _ExtendedGDBusInterfaceInfo *info = (_ExtendedGDBusInterfaceInfo *) g_dbus_interface_get_info (interface); |
| /* info can be NULL if the other end is using a D-Bus interface we don't know |
| * anything about, for example old generated code in this process talking to |
| * newer generated code in the other process. */ |
| if (info != NULL) |
| g_object_notify (G_OBJECT (object), info->hyphen_name); |
| } |
| |
| /** |
| * ObjectProxy: |
| * |
| * The #ObjectProxy structure contains only private data and should only be accessed using the provided API. |
| */ |
| |
| /** |
| * ObjectProxyClass: |
| * @parent_class: The parent class. |
| * |
| * Class structure for #ObjectProxy. |
| */ |
| |
| static void |
| object_proxy__object_iface_init (ObjectIface *iface G_GNUC_UNUSED) |
| { |
| } |
| |
| static void |
| object_proxy__g_dbus_object_iface_init (GDBusObjectIface *iface) |
| { |
| iface->interface_added = object_notify; |
| iface->interface_removed = object_notify; |
| } |
| |
| |
| G_DEFINE_TYPE_WITH_CODE (ObjectProxy, object_proxy, G_TYPE_DBUS_OBJECT_PROXY, |
| G_IMPLEMENT_INTERFACE (TYPE_OBJECT, object_proxy__object_iface_init) |
| G_IMPLEMENT_INTERFACE (G_TYPE_DBUS_OBJECT, object_proxy__g_dbus_object_iface_init)); |
| |
| static void |
| object_proxy_init (ObjectProxy *object G_GNUC_UNUSED) |
| { |
| } |
| |
| static void |
| object_proxy_set_property (GObject *gobject, |
| guint prop_id, |
| const GValue *value G_GNUC_UNUSED, |
| GParamSpec *pspec) |
| { |
| G_OBJECT_WARN_INVALID_PROPERTY_ID (gobject, prop_id, pspec); |
| } |
| |
| static void |
| object_proxy_get_property (GObject *gobject, |
| guint prop_id, |
| GValue *value, |
| GParamSpec *pspec) |
| { |
| ObjectProxy *object = OBJECT_PROXY (gobject); |
| GDBusInterface *interface; |
| |
| switch (prop_id) |
| { |
| case 1: |
| interface = g_dbus_object_get_interface (G_DBUS_OBJECT (object), "org.openbmc.control.Host"); |
| g_value_take_object (value, interface); |
| break; |
| |
| default: |
| G_OBJECT_WARN_INVALID_PROPERTY_ID (gobject, prop_id, pspec); |
| break; |
| } |
| } |
| |
| static void |
| object_proxy_class_init (ObjectProxyClass *klass) |
| { |
| GObjectClass *gobject_class = G_OBJECT_CLASS (klass); |
| |
| gobject_class->set_property = object_proxy_set_property; |
| gobject_class->get_property = object_proxy_get_property; |
| |
| g_object_class_override_property (gobject_class, 1, "control-host"); |
| } |
| |
| /** |
| * object_proxy_new: |
| * @connection: A #GDBusConnection. |
| * @object_path: An object path. |
| * |
| * Creates a new proxy object. |
| * |
| * Returns: (transfer full): The proxy object. |
| */ |
| ObjectProxy * |
| object_proxy_new (GDBusConnection *connection, |
| const gchar *object_path) |
| { |
| g_return_val_if_fail (G_IS_DBUS_CONNECTION (connection), NULL); |
| g_return_val_if_fail (g_variant_is_object_path (object_path), NULL); |
| return OBJECT_PROXY (g_object_new (TYPE_OBJECT_PROXY, "g-connection", connection, "g-object-path", object_path, NULL)); |
| } |
| |
| /** |
| * ObjectSkeleton: |
| * |
| * The #ObjectSkeleton structure contains only private data and should only be accessed using the provided API. |
| */ |
| |
| /** |
| * ObjectSkeletonClass: |
| * @parent_class: The parent class. |
| * |
| * Class structure for #ObjectSkeleton. |
| */ |
| |
| static void |
| object_skeleton__object_iface_init (ObjectIface *iface G_GNUC_UNUSED) |
| { |
| } |
| |
| |
| static void |
| object_skeleton__g_dbus_object_iface_init (GDBusObjectIface *iface) |
| { |
| iface->interface_added = object_notify; |
| iface->interface_removed = object_notify; |
| } |
| |
| G_DEFINE_TYPE_WITH_CODE (ObjectSkeleton, object_skeleton, G_TYPE_DBUS_OBJECT_SKELETON, |
| G_IMPLEMENT_INTERFACE (TYPE_OBJECT, object_skeleton__object_iface_init) |
| G_IMPLEMENT_INTERFACE (G_TYPE_DBUS_OBJECT, object_skeleton__g_dbus_object_iface_init)); |
| |
| static void |
| object_skeleton_init (ObjectSkeleton *object G_GNUC_UNUSED) |
| { |
| } |
| |
| static void |
| object_skeleton_set_property (GObject *gobject, |
| guint prop_id, |
| const GValue *value, |
| GParamSpec *pspec) |
| { |
| ObjectSkeleton *object = OBJECT_SKELETON (gobject); |
| GDBusInterfaceSkeleton *interface; |
| |
| switch (prop_id) |
| { |
| case 1: |
| interface = g_value_get_object (value); |
| if (interface != NULL) |
| { |
| g_warn_if_fail (IS_CONTROL_HOST (interface)); |
| g_dbus_object_skeleton_add_interface (G_DBUS_OBJECT_SKELETON (object), interface); |
| } |
| else |
| { |
| g_dbus_object_skeleton_remove_interface_by_name (G_DBUS_OBJECT_SKELETON (object), "org.openbmc.control.Host"); |
| } |
| break; |
| |
| default: |
| G_OBJECT_WARN_INVALID_PROPERTY_ID (gobject, prop_id, pspec); |
| break; |
| } |
| } |
| |
| static void |
| object_skeleton_get_property (GObject *gobject, |
| guint prop_id, |
| GValue *value, |
| GParamSpec *pspec) |
| { |
| ObjectSkeleton *object = OBJECT_SKELETON (gobject); |
| GDBusInterface *interface; |
| |
| switch (prop_id) |
| { |
| case 1: |
| interface = g_dbus_object_get_interface (G_DBUS_OBJECT (object), "org.openbmc.control.Host"); |
| g_value_take_object (value, interface); |
| break; |
| |
| default: |
| G_OBJECT_WARN_INVALID_PROPERTY_ID (gobject, prop_id, pspec); |
| break; |
| } |
| } |
| |
| static void |
| object_skeleton_class_init (ObjectSkeletonClass *klass) |
| { |
| GObjectClass *gobject_class = G_OBJECT_CLASS (klass); |
| |
| gobject_class->set_property = object_skeleton_set_property; |
| gobject_class->get_property = object_skeleton_get_property; |
| |
| g_object_class_override_property (gobject_class, 1, "control-host"); |
| } |
| |
| /** |
| * object_skeleton_new: |
| * @object_path: An object path. |
| * |
| * Creates a new skeleton object. |
| * |
| * Returns: (transfer full): The skeleton object. |
| */ |
| ObjectSkeleton * |
| object_skeleton_new (const gchar *object_path) |
| { |
| g_return_val_if_fail (g_variant_is_object_path (object_path), NULL); |
| return OBJECT_SKELETON (g_object_new (TYPE_OBJECT_SKELETON, "g-object-path", object_path, NULL)); |
| } |
| |
| /** |
| * object_skeleton_set_control_host: |
| * @object: A #ObjectSkeleton. |
| * @interface_: (allow-none): A #ControlHost or %NULL to clear the interface. |
| * |
| * Sets the #ControlHost instance for the D-Bus interface <link linkend="gdbus-interface-org-openbmc-control-Host.top_of_page">org.openbmc.control.Host</link> on @object. |
| */ |
| void object_skeleton_set_control_host (ObjectSkeleton *object, ControlHost *interface_) |
| { |
| g_object_set (G_OBJECT (object), "control-host", interface_, NULL); |
| } |
| |
| |
| /* ------------------------------------------------------------------------ |
| * Code for ObjectManager client |
| * ------------------------------------------------------------------------ |
| */ |
| |
| /** |
| * SECTION:ObjectManagerClient |
| * @title: ObjectManagerClient |
| * @short_description: Generated GDBusObjectManagerClient type |
| * |
| * This section contains a #GDBusObjectManagerClient that uses object_manager_client_get_proxy_type() as the #GDBusProxyTypeFunc. |
| */ |
| |
| /** |
| * ObjectManagerClient: |
| * |
| * The #ObjectManagerClient structure contains only private data and should only be accessed using the provided API. |
| */ |
| |
| /** |
| * ObjectManagerClientClass: |
| * @parent_class: The parent class. |
| * |
| * Class structure for #ObjectManagerClient. |
| */ |
| |
| G_DEFINE_TYPE (ObjectManagerClient, object_manager_client, G_TYPE_DBUS_OBJECT_MANAGER_CLIENT); |
| |
| static void |
| object_manager_client_init (ObjectManagerClient *manager G_GNUC_UNUSED) |
| { |
| } |
| |
| static void |
| object_manager_client_class_init (ObjectManagerClientClass *klass G_GNUC_UNUSED) |
| { |
| } |
| |
| /** |
| * object_manager_client_get_proxy_type: |
| * @manager: A #GDBusObjectManagerClient. |
| * @object_path: The object path of the remote object (unused). |
| * @interface_name: (allow-none): Interface name of the remote object or %NULL to get the object proxy #GType. |
| * @user_data: User data (unused). |
| * |
| * A #GDBusProxyTypeFunc that maps @interface_name to the generated #GDBusObjectProxy<!-- -->- and #GDBusProxy<!-- -->-derived types. |
| * |
| * Returns: A #GDBusProxy<!-- -->-derived #GType if @interface_name is not %NULL, otherwise the #GType for #ObjectProxy. |
| */ |
| GType |
| object_manager_client_get_proxy_type (GDBusObjectManagerClient *manager G_GNUC_UNUSED, const gchar *object_path G_GNUC_UNUSED, const gchar *interface_name, gpointer user_data G_GNUC_UNUSED) |
| { |
| static gsize once_init_value = 0; |
| static GHashTable *lookup_hash; |
| GType ret; |
| |
| if (interface_name == NULL) |
| return TYPE_OBJECT_PROXY; |
| if (g_once_init_enter (&once_init_value)) |
| { |
| lookup_hash = g_hash_table_new (g_str_hash, g_str_equal); |
| g_hash_table_insert (lookup_hash, (gpointer) "org.openbmc.control.Host", GSIZE_TO_POINTER (TYPE_CONTROL_HOST_PROXY)); |
| g_once_init_leave (&once_init_value, 1); |
| } |
| ret = (GType) GPOINTER_TO_SIZE (g_hash_table_lookup (lookup_hash, interface_name)); |
| if (ret == (GType) 0) |
| ret = G_TYPE_DBUS_PROXY; |
| return ret; |
| } |
| |
| /** |
| * object_manager_client_new: |
| * @connection: A #GDBusConnection. |
| * @flags: Flags from the #GDBusObjectManagerClientFlags enumeration. |
| * @name: (allow-none): A bus name (well-known or unique) or %NULL if @connection is not a message bus connection. |
| * @object_path: An object path. |
| * @cancellable: (allow-none): A #GCancellable or %NULL. |
| * @callback: A #GAsyncReadyCallback to call when the request is satisfied. |
| * @user_data: User data to pass to @callback. |
| * |
| * Asynchronously creates #GDBusObjectManagerClient using object_manager_client_get_proxy_type() as the #GDBusProxyTypeFunc. See g_dbus_object_manager_client_new() for more details. |
| * |
| * When the operation is finished, @callback will be invoked in the <link linkend="g-main-context-push-thread-default">thread-default main loop</link> of the thread you are calling this method from. |
| * You can then call object_manager_client_new_finish() to get the result of the operation. |
| * |
| * See object_manager_client_new_sync() for the synchronous, blocking version of this constructor. |
| */ |
| void |
| object_manager_client_new ( |
| GDBusConnection *connection, |
| GDBusObjectManagerClientFlags flags, |
| const gchar *name, |
| const gchar *object_path, |
| GCancellable *cancellable, |
| GAsyncReadyCallback callback, |
| gpointer user_data) |
| { |
| g_async_initable_new_async (TYPE_OBJECT_MANAGER_CLIENT, G_PRIORITY_DEFAULT, cancellable, callback, user_data, "flags", flags, "name", name, "connection", connection, "object-path", object_path, "get-proxy-type-func", object_manager_client_get_proxy_type, NULL); |
| } |
| |
| /** |
| * object_manager_client_new_finish: |
| * @res: The #GAsyncResult obtained from the #GAsyncReadyCallback passed to object_manager_client_new(). |
| * @error: Return location for error or %NULL |
| * |
| * Finishes an operation started with object_manager_client_new(). |
| * |
| * Returns: (transfer full) (type ObjectManagerClient): The constructed object manager client or %NULL if @error is set. |
| */ |
| GDBusObjectManager * |
| object_manager_client_new_finish ( |
| GAsyncResult *res, |
| GError **error) |
| { |
| GObject *ret; |
| GObject *source_object; |
| source_object = g_async_result_get_source_object (res); |
| ret = g_async_initable_new_finish (G_ASYNC_INITABLE (source_object), res, error); |
| g_object_unref (source_object); |
| if (ret != NULL) |
| return G_DBUS_OBJECT_MANAGER (ret); |
| else |
| return NULL; |
| } |
| |
| /** |
| * object_manager_client_new_sync: |
| * @connection: A #GDBusConnection. |
| * @flags: Flags from the #GDBusObjectManagerClientFlags enumeration. |
| * @name: (allow-none): A bus name (well-known or unique) or %NULL if @connection is not a message bus connection. |
| * @object_path: An object path. |
| * @cancellable: (allow-none): A #GCancellable or %NULL. |
| * @error: Return location for error or %NULL |
| * |
| * Synchronously creates #GDBusObjectManagerClient using object_manager_client_get_proxy_type() as the #GDBusProxyTypeFunc. See g_dbus_object_manager_client_new_sync() for more details. |
| * |
| * The calling thread is blocked until a reply is received. |
| * |
| * See object_manager_client_new() for the asynchronous version of this constructor. |
| * |
| * Returns: (transfer full) (type ObjectManagerClient): The constructed object manager client or %NULL if @error is set. |
| */ |
| GDBusObjectManager * |
| object_manager_client_new_sync ( |
| GDBusConnection *connection, |
| GDBusObjectManagerClientFlags flags, |
| const gchar *name, |
| const gchar *object_path, |
| GCancellable *cancellable, |
| GError **error) |
| { |
| GInitable *ret; |
| ret = g_initable_new (TYPE_OBJECT_MANAGER_CLIENT, cancellable, error, "flags", flags, "name", name, "connection", connection, "object-path", object_path, "get-proxy-type-func", object_manager_client_get_proxy_type, NULL); |
| if (ret != NULL) |
| return G_DBUS_OBJECT_MANAGER (ret); |
| else |
| return NULL; |
| } |
| |
| |
| /** |
| * object_manager_client_new_for_bus: |
| * @bus_type: A #GBusType. |
| * @flags: Flags from the #GDBusObjectManagerClientFlags enumeration. |
| * @name: A bus name (well-known or unique). |
| * @object_path: An object path. |
| * @cancellable: (allow-none): A #GCancellable or %NULL. |
| * @callback: A #GAsyncReadyCallback to call when the request is satisfied. |
| * @user_data: User data to pass to @callback. |
| * |
| * Like object_manager_client_new() but takes a #GBusType instead of a #GDBusConnection. |
| * |
| * When the operation is finished, @callback will be invoked in the <link linkend="g-main-context-push-thread-default">thread-default main loop</link> of the thread you are calling this method from. |
| * You can then call object_manager_client_new_for_bus_finish() to get the result of the operation. |
| * |
| * See object_manager_client_new_for_bus_sync() for the synchronous, blocking version of this constructor. |
| */ |
| void |
| object_manager_client_new_for_bus ( |
| GBusType bus_type, |
| GDBusObjectManagerClientFlags flags, |
| const gchar *name, |
| const gchar *object_path, |
| GCancellable *cancellable, |
| GAsyncReadyCallback callback, |
| gpointer user_data) |
| { |
| g_async_initable_new_async (TYPE_OBJECT_MANAGER_CLIENT, G_PRIORITY_DEFAULT, cancellable, callback, user_data, "flags", flags, "name", name, "bus-type", bus_type, "object-path", object_path, "get-proxy-type-func", object_manager_client_get_proxy_type, NULL); |
| } |
| |
| /** |
| * object_manager_client_new_for_bus_finish: |
| * @res: The #GAsyncResult obtained from the #GAsyncReadyCallback passed to object_manager_client_new_for_bus(). |
| * @error: Return location for error or %NULL |
| * |
| * Finishes an operation started with object_manager_client_new_for_bus(). |
| * |
| * Returns: (transfer full) (type ObjectManagerClient): The constructed object manager client or %NULL if @error is set. |
| */ |
| GDBusObjectManager * |
| object_manager_client_new_for_bus_finish ( |
| GAsyncResult *res, |
| GError **error) |
| { |
| GObject *ret; |
| GObject *source_object; |
| source_object = g_async_result_get_source_object (res); |
| ret = g_async_initable_new_finish (G_ASYNC_INITABLE (source_object), res, error); |
| g_object_unref (source_object); |
| if (ret != NULL) |
| return G_DBUS_OBJECT_MANAGER (ret); |
| else |
| return NULL; |
| } |
| |
| /** |
| * object_manager_client_new_for_bus_sync: |
| * @bus_type: A #GBusType. |
| * @flags: Flags from the #GDBusObjectManagerClientFlags enumeration. |
| * @name: A bus name (well-known or unique). |
| * @object_path: An object path. |
| * @cancellable: (allow-none): A #GCancellable or %NULL. |
| * @error: Return location for error or %NULL |
| * |
| * Like object_manager_client_new_sync() but takes a #GBusType instead of a #GDBusConnection. |
| * |
| * The calling thread is blocked until a reply is received. |
| * |
| * See object_manager_client_new_for_bus() for the asynchronous version of this constructor. |
| * |
| * Returns: (transfer full) (type ObjectManagerClient): The constructed object manager client or %NULL if @error is set. |
| */ |
| GDBusObjectManager * |
| object_manager_client_new_for_bus_sync ( |
| GBusType bus_type, |
| GDBusObjectManagerClientFlags flags, |
| const gchar *name, |
| const gchar *object_path, |
| GCancellable *cancellable, |
| GError **error) |
| { |
| GInitable *ret; |
| ret = g_initable_new (TYPE_OBJECT_MANAGER_CLIENT, cancellable, error, "flags", flags, "name", name, "bus-type", bus_type, "object-path", object_path, "get-proxy-type-func", object_manager_client_get_proxy_type, NULL); |
| if (ret != NULL) |
| return G_DBUS_OBJECT_MANAGER (ret); |
| else |
| return NULL; |
| } |
| |
| |