| #include <stdio.h> |
| #include <stdlib.h> |
| #include <string.h> |
| #include <fcntl.h> |
| #include <unistd.h> |
| #include <sys/stat.h> |
| #include <sys/mman.h> |
| #include <errno.h> |
| |
| #include <openbmc_intf.h> |
| #include <openbmc.h> |
| |
| /* ------------------------------------------------------------------------- */ |
| static const gchar* dbus_object_path = "/org/openbmc/control"; |
| static const gchar* instance_name = "host0"; |
| static const gchar* dbus_name = "org.openbmc.control.Host"; |
| |
| static GDBusObjectManagerServer *manager = NULL; |
| |
| #define PPC_BIT32(bit) (0x80000000UL >> (bit)) |
| |
| #define FSI_EXTERNAL_MODE_PATH "/sys/devices/platform/gpio-fsi/external_mode" |
| #define FSI_SCAN_PATH "/sys/devices/platform/gpio-fsi/fsi0/rescan" |
| |
| /* TODO: Change this over to the cfam path once the cfam chardev patches have landed */ |
| #define FSI_RAW_PATH "/sys/devices/platform/gpio-fsi/fsi0/slave@00:00/raw" |
| |
| #define FSI_SCAN_DELAY_US 10000 |
| |
| /* Attention registers */ |
| #define FSI_A_SI1S 0x081c |
| #define TRUE_MASK 0x100d |
| #define INTERRUPT_STATUS_REG 0x100b |
| |
| /* SBE boot register and values */ |
| #define SBE_VITAL 0x281c |
| #define SBE_WARMSTART PPC_BIT32(0) |
| #define SBE_HW_TRIGGER PPC_BIT32(2) |
| #define SBE_UPDATE_1ST_NIBBLE PPC_BIT32(3) |
| #define SBE_IMAGE_SELECT PPC_BIT32(8) |
| #define SBE_UPDATE_3RD_NIBBLE PPC_BIT32(11) |
| |
| /* Once the side is selected and attention bits are set, this starts the SBE */ |
| #define START_SBE (SBE_WARMSTART | SBE_HW_TRIGGER | SBE_UPDATE_1ST_NIBBLE) |
| |
| /* Primary is first side. Golden is second side */ |
| #define PRIMARY_SIDE (SBE_HW_TRIGGER | SBE_UPDATE_1ST_NIBBLE) |
| #define GOLDEN_SIDE (SBE_HW_TRIGGER | SBE_UPDATE_1ST_NIBBLE | \ |
| SBE_IMAGE_SELECT | SBE_UPDATE_3RD_NIBBLE) |
| |
| static gboolean |
| on_init(Control *control, |
| GDBusMethodInvocation *invocation, |
| gpointer user_data) |
| { |
| control_complete_init(control,invocation); |
| return TRUE; |
| } |
| |
| static gint |
| fsi_putcfam(int fd, uint64_t addr64, uint32_t val_host) |
| { |
| int rc; |
| uint32_t val = htobe32(val_host); |
| /* Map FSI to FSI_BYTE, as the 'raw' kernel interface expects this */ |
| uint32_t addr = (addr64 & 0x7ffc00) | ((addr64 & 0x3ff) << 2); |
| |
| rc = lseek(fd, addr, SEEK_SET); |
| if (rc < 0) { |
| g_print("ERROR HostControl: cfam seek failed (0x%08x): %s\n", addr, |
| strerror(errno)); |
| return errno; |
| }; |
| |
| rc = write(fd, &val, sizeof(val)); |
| if (rc < 0) { |
| g_print("ERROR HostControl: cfam write failed: %s\n", |
| strerror(errno)); |
| return errno; |
| } |
| |
| return 0; |
| } |
| |
| static int fsi_rescan(void) |
| { |
| char *one = "1"; |
| int fd, rc; |
| |
| fd = open(FSI_SCAN_PATH, O_WRONLY); |
| if (fd < 0) { |
| g_print("ERROR HostControl: Failed to open path '%s': %s\n", |
| FSI_SCAN_PATH, strerror(errno)); |
| return errno; |
| } |
| rc = write(fd, one, sizeof(one)); |
| close(fd); |
| if (rc < 0) { |
| g_print("ERROR HostControl: Failed to perform FSI scan: %s\n", |
| strerror(errno)); |
| return errno; |
| } |
| g_print("HostControl: Performing FSI scan (delay %d us)\n", |
| FSI_SCAN_DELAY_US); |
| usleep(FSI_SCAN_DELAY_US); |
| |
| return 0; |
| } |
| |
| static gboolean |
| on_boot(ControlHost *host, |
| GDBusMethodInvocation *invocation, |
| gpointer user_data) |
| { |
| int rc, cfam_fd; |
| GDBusProxy *proxy; |
| GError *error = NULL; |
| GDBusConnection *connection = |
| g_dbus_object_manager_server_get_connection(manager); |
| |
| if(control_host_get_debug_mode(host)==1) { |
| int fd; |
| char *one = "1"; |
| g_print("Enabling debug mode; not booting host\n"); |
| fd = open(FSI_EXTERNAL_MODE_PATH, O_RDWR); |
| if (fd < 0) { |
| g_print("ERROR HostControl: Failed to open path '%s'\n", |
| FSI_EXTERNAL_MODE_PATH); |
| return TRUE; |
| } |
| rc = write(fd, one, sizeof(one)); |
| if (rc < 0) { |
| g_print("ERROR HostControl: Failed to enable debug mode '%s'\n", |
| FSI_EXTERNAL_MODE_PATH); |
| } |
| close(fd); |
| return TRUE; |
| } |
| g_print("Booting host\n"); |
| |
| rc = fsi_rescan(); |
| if (rc < 0) |
| return FALSE; |
| |
| cfam_fd = open(FSI_RAW_PATH, O_RDWR); |
| if (cfam_fd < 0) { |
| g_print("ERROR HostControl: Failed to open '%s'\n", FSI_RAW_PATH); |
| return FALSE; |
| } |
| |
| Control* control = object_get_control((Object*)user_data); |
| control_host_complete_boot(host,invocation); |
| do { |
| rc = fsi_putcfam(cfam_fd, FSI_A_SI1S, 0x20000000); |
| rc |= fsi_putcfam(cfam_fd, TRUE_MASK, 0x40000000); |
| rc |= fsi_putcfam(cfam_fd, INTERRUPT_STATUS_REG, 0xFFFFFFFF); |
| if(rc) { break; } |
| |
| const gchar* flash_side = control_host_get_flash_side(host); |
| g_print("Using %s side of the bios flash\n",flash_side); |
| if(strcmp(flash_side,"primary")==0) { |
| rc |= fsi_putcfam(cfam_fd, SBE_VITAL, PRIMARY_SIDE); |
| } else if(strcmp(flash_side,"golden") == 0) { |
| rc |= fsi_putcfam(cfam_fd, SBE_VITAL, GOLDEN_SIDE); |
| } else { |
| g_print("ERROR: Invalid flash side: %s\n",flash_side); |
| rc = 0xff; |
| |
| } |
| if(rc) { break; } |
| |
| rc = fsi_putcfam(cfam_fd, SBE_VITAL, START_SBE); |
| } while(0); |
| if(rc) |
| { |
| g_print("ERROR HostControl: SBE sequence failed (rc=%d)\n",rc); |
| } |
| /* Close file descriptor */ |
| close(cfam_fd); |
| |
| control_host_emit_booted(host); |
| |
| return TRUE; |
| } |
| |
| static void |
| on_bus_acquired(GDBusConnection *connection, |
| const gchar *name, |
| gpointer user_data) |
| { |
| ObjectSkeleton *object; |
| //g_print ("Acquired a message bus connection: %s\n",name); |
| manager = g_dbus_object_manager_server_new(dbus_object_path); |
| |
| gchar *s; |
| s = g_strdup_printf("%s/%s",dbus_object_path,instance_name); |
| object = object_skeleton_new(s); |
| g_free(s); |
| |
| ControlHost* control_host = control_host_skeleton_new(); |
| object_skeleton_set_control_host(object, control_host); |
| g_object_unref(control_host); |
| |
| Control* control = control_skeleton_new(); |
| object_skeleton_set_control(object, control); |
| g_object_unref(control); |
| |
| //define method callbacks here |
| g_signal_connect(control_host, |
| "handle-boot", |
| G_CALLBACK(on_boot), |
| object); /* user_data */ |
| g_signal_connect(control, |
| "handle-init", |
| G_CALLBACK(on_init), |
| NULL); /* user_data */ |
| |
| control_host_set_debug_mode(control_host,0); |
| control_host_set_flash_side(control_host,"primary"); |
| |
| /* Export the object (@manager takes its own reference to @object) */ |
| g_dbus_object_manager_server_set_connection(manager, connection); |
| g_dbus_object_manager_server_export(manager, G_DBUS_OBJECT_SKELETON(object)); |
| g_object_unref(object); |
| } |
| |
| static void |
| on_name_acquired(GDBusConnection *connection, |
| const gchar *name, |
| gpointer user_data) |
| { |
| // g_print ("Acquired the name %s\n", name); |
| } |
| |
| static void |
| on_name_lost(GDBusConnection *connection, |
| const gchar *name, |
| gpointer user_data) |
| { |
| // g_print ("Lost the name %s\n", name); |
| } |
| |
| gint |
| main(gint argc, gchar *argv[]) |
| { |
| GMainLoop *loop; |
| cmdline cmd; |
| cmd.argc = argc; |
| cmd.argv = argv; |
| |
| guint id; |
| loop = g_main_loop_new(NULL, FALSE); |
| |
| id = g_bus_own_name(DBUS_TYPE, |
| dbus_name, |
| G_BUS_NAME_OWNER_FLAGS_ALLOW_REPLACEMENT | |
| G_BUS_NAME_OWNER_FLAGS_REPLACE, |
| on_bus_acquired, |
| on_name_acquired, |
| on_name_lost, |
| &cmd, |
| NULL); |
| |
| g_main_loop_run(loop); |
| |
| g_bus_unown_name(id); |
| g_main_loop_unref(loop); |
| return 0; |
| } |