| /** |
| * Copyright © 2017 IBM Corporation |
| * |
| * Licensed under the Apache License, Version 2.0 (the "License"); |
| * you may not use this file except in compliance with the License. |
| * You may obtain a copy of the License at |
| * |
| * http://www.apache.org/licenses/LICENSE-2.0 |
| * |
| * Unless required by applicable law or agreed to in writing, software |
| * distributed under the License is distributed on an "AS IS" BASIS, |
| * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| * See the License for the specific language governing permissions and |
| * limitations under the License. |
| */ |
| #include <experimental/filesystem> |
| #include <fstream> |
| #include <phosphor-logging/elog.hpp> |
| #include <phosphor-logging/elog-errors.hpp> |
| #include <xyz/openbmc_project/Common/error.hpp> |
| #include <xyz/openbmc_project/Common/Device/error.hpp> |
| #include "pmbus.hpp" |
| |
| namespace witherspoon |
| { |
| namespace pmbus |
| { |
| |
| using namespace phosphor::logging; |
| using namespace sdbusplus::xyz::openbmc_project::Common::Error; |
| using namespace sdbusplus::xyz::openbmc_project::Common::Device::Error; |
| namespace fs = std::experimental::filesystem; |
| |
| std::string PMBus::insertPageNum(const std::string& templateName, |
| size_t page) |
| { |
| auto name = templateName; |
| |
| //insert the page where the P was |
| auto pos = name.find('P'); |
| if (pos != std::string::npos) |
| { |
| name.replace(pos, 1, std::to_string(page)); |
| } |
| |
| return name; |
| } |
| |
| fs::path PMBus::getPath(Type type) |
| { |
| switch (type) |
| { |
| default: |
| /* fall through */ |
| case Type::Base: |
| return basePath; |
| break; |
| case Type::Hwmon: |
| return basePath / "hwmon" / hwmonDir; |
| break; |
| case Type::Debug: |
| return debugPath / "pmbus" / hwmonDir; |
| break; |
| case Type::DeviceDebug: |
| { |
| auto dir = driverName + "." + std::to_string(instance); |
| return debugPath / dir; |
| break; |
| } |
| case Type::HwmonDeviceDebug: |
| return debugPath / "pmbus" / hwmonDir / getDeviceName(); |
| break; |
| } |
| } |
| |
| std::string PMBus::getDeviceName() |
| { |
| std::string name; |
| std::ifstream file; |
| auto path = basePath / "name"; |
| |
| file.exceptions(std::ifstream::failbit | |
| std::ifstream::badbit | |
| std::ifstream::eofbit); |
| try |
| { |
| file.open(path); |
| file >> name; |
| } |
| catch (std::exception& e) |
| { |
| log<level::ERR>("Unable to read PMBus device name", |
| entry("PATH=%s", path.c_str())); |
| } |
| |
| return name; |
| } |
| |
| bool PMBus::readBitInPage(const std::string& name, |
| size_t page, |
| Type type) |
| { |
| auto pagedBit = insertPageNum(name, page); |
| return readBit(pagedBit, type); |
| } |
| |
| bool PMBus::readBit(const std::string& name, Type type) |
| { |
| unsigned long int value = 0; |
| std::ifstream file; |
| fs::path path = getPath(type); |
| |
| path /= name; |
| |
| file.exceptions(std::ifstream::failbit | |
| std::ifstream::badbit | |
| std::ifstream::eofbit); |
| |
| try |
| { |
| char* err = NULL; |
| std::string val{1, '\0'}; |
| |
| file.open(path); |
| file.read(&val[0], 1); |
| |
| value = strtoul(val.c_str(), &err, 10); |
| |
| if (*err) |
| { |
| log<level::ERR>("Invalid character in sysfs file", |
| entry("FILE=%s", path.c_str()), |
| entry("CONTENTS=%s", val.c_str())); |
| |
| //Catch below and handle as a read failure |
| elog<InternalFailure>(); |
| } |
| } |
| catch (std::exception& e) |
| { |
| auto rc = errno; |
| |
| log<level::ERR>("Failed to read sysfs file", |
| entry("FILENAME=%s", path.c_str())); |
| |
| using metadata = xyz::openbmc_project::Common::Device::ReadFailure; |
| |
| elog<ReadFailure>(metadata::CALLOUT_ERRNO(rc), |
| metadata::CALLOUT_DEVICE_PATH( |
| fs::canonical(basePath).c_str())); |
| } |
| |
| return value != 0; |
| } |
| |
| bool PMBus::exists(const std::string& name, Type type) |
| { |
| auto path = getPath(type); |
| path /= name; |
| return fs::exists(path); |
| } |
| |
| uint64_t PMBus::read(const std::string& name, Type type) |
| { |
| uint64_t data = 0; |
| std::ifstream file; |
| auto path = getPath(type); |
| path /= name; |
| |
| file.exceptions(std::ifstream::failbit | |
| std::ifstream::badbit | |
| std::ifstream::eofbit); |
| |
| try |
| { |
| file.open(path); |
| file >> std::hex >> data; |
| } |
| catch (std::exception& e) |
| { |
| auto rc = errno; |
| log<level::ERR>("Failed to read sysfs file", |
| entry("FILENAME=%s", path.c_str())); |
| |
| using metadata = xyz::openbmc_project::Common::Device::ReadFailure; |
| |
| elog<ReadFailure>(metadata::CALLOUT_ERRNO(rc), |
| metadata::CALLOUT_DEVICE_PATH( |
| fs::canonical(basePath).c_str())); |
| } |
| |
| return data; |
| } |
| |
| void PMBus::write(const std::string& name, int value, Type type) |
| { |
| std::ofstream file; |
| fs::path path = getPath(type); |
| |
| path /= name; |
| |
| file.exceptions(std::ofstream::failbit | |
| std::ofstream::badbit | |
| std::ofstream::eofbit); |
| |
| try |
| { |
| file.open(path); |
| file << value; |
| } |
| catch (const std::exception& e) |
| { |
| auto rc = errno; |
| |
| log<level::ERR>("Failed to write sysfs file", |
| entry("FILENAME=%s", path.c_str())); |
| |
| using metadata = xyz::openbmc_project::Common::Device::WriteFailure; |
| |
| elog<WriteFailure>(metadata::CALLOUT_ERRNO(rc), |
| metadata::CALLOUT_DEVICE_PATH( |
| fs::canonical(basePath).c_str())); |
| } |
| } |
| |
| void PMBus::findHwmonDir() |
| { |
| fs::path path{basePath}; |
| path /= "hwmon"; |
| |
| // Make sure the directory exists, otherwise for things that can be |
| // dynamically present or not present an exception will be thrown if the |
| // hwmon directory is not there, resulting in a program termination. |
| if (fs::is_directory(path)) |
| { |
| //look for <basePath>/hwmon/hwmonN/ |
| for (auto& f : fs::directory_iterator(path)) |
| { |
| if ((f.path().filename().string().find("hwmon") != |
| std::string::npos) && |
| (fs::is_directory(f.path()))) |
| { |
| hwmonDir = f.path().filename(); |
| break; |
| } |
| } |
| } |
| |
| //Don't really want to crash here, just log it |
| //and let accesses fail later |
| if (hwmonDir.empty()) |
| { |
| log<level::INFO>("Unable to find hwmon directory " |
| "in device base path", |
| entry("DEVICE_PATH=%s", basePath.c_str())); |
| } |
| |
| } |
| |
| } |
| } |