| # The Serial Flash Controller is the AST2400 BMC. | |
| set SFC_IS_AST2400 | |
| set PNORDD_IS_IPMI | |
| unset PNORDD_IS_SFC | |
| set BMC_DOES_SFC_INIT | |
| unset SFC_IS_IBM_DPSS | |
| set ALLOW_MICRON_PNOR | |
| set ALLOW_MACRONIX_PNOR | |
| # VPD options. | |
| set MVPD_READ_FROM_HW | |
| set MVPD_WRITE_TO_HW | |
| set MVPD_READ_FROM_PNOR | |
| set MVPD_WRITE_TO_PNOR | |
| set DJVPD_READ_FROM_HW | |
| unset DJVPD_WRITE_TO_HW | |
| set DJVPD_READ_FROM_PNOR | |
| set DJVPD_WRITE_TO_PNOR | |
| set CVPD_READ_FROM_HW | |
| set CVPD_WRITE_TO_HW | |
| set CVPD_READ_FROM_PNOR | |
| set CVPD_WRITE_TO_PNOR | |
| set PVPD_READ_FROM_HW | |
| set PVPD_WRITE_TO_HW | |
| set PVPD_READ_FROM_PNOR | |
| set PVPD_WRITE_TO_PNOR | |
| set SKIP_RESTRICT_EX_UNITS | |
| unset CDIMM_FORMAT_FOR_CVPD | |
| # gpio config | |
| set GPIODD | |
| set PALMETTO_VDDR | |
| # Enable SBE updates | |
| #set SBE_UPDATE_INDEPENDENT | |
| set SBE_UPDATE_SIMULTANEOUS | |
| unset PCIE_HOTPLUG_CONTROLLER | |
| # turn on console output | |
| set CONSOLE | |
| set BMC_AST2400 | |
| # Enable Kingston dimm voltage workaround | |
| unset KINGSTON_1_35_VOLT | |
| unset DISABLE_HOSTBOOT_RUNTIME | |
| # Compile in hostboot runtime PRD | |
| set HBRT_PRD | |
| set HTMGT | |
| set START_OCC_DURING_BOOT | |
| #PNOR flags | |
| unset PNOR_TWO_SIDE_SUPPORT | |
| set PNOR_IS_32MB | |
| set BMC_BT_LPC_IPMI | |
| unset SET_NOMINAL_PSTATE | |
| # Enable Checktop Analysis | |
| set ENABLE_CHECKSTOP_ANALYSIS | |
| set IPLTIME_CHECKSTOP_ANALYSIS | |
| # Hostboot will detect hardware changes | |
| set HOST_HCDB_SUPPORT | |
| # set for trace debug to console | |
| unset CONSOLE_OUTPUT_TRACE |