| # The Serial Flash Controller is the AST2500 BMC. | |
| set SFC_IS_AST2500 | |
| unset SFC_IS_AST2400 | |
| unset BMC_DOES_SFC_INIT | |
| unset SFC_IS_IBM_DPSS | |
| set ALLOW_MICRON_PNOR | |
| set ALLOW_MACRONIX_PNOR | |
| # VPD options. | |
| set MVPD_READ_FROM_HW | |
| set MVPD_WRITE_TO_HW | |
| set MVPD_READ_FROM_PNOR | |
| set MVPD_WRITE_TO_PNOR | |
| set DJVPD_READ_FROM_HW | |
| set DJVPD_WRITE_TO_HW | |
| set DJVPD_READ_FROM_PNOR | |
| set DJVPD_WRITE_TO_PNOR | |
| unset MEMVPD_READ_FROM_HW | |
| unset MEMVPD_WRITE_TO_HW | |
| set MEMVPD_READ_FROM_PNOR | |
| set MEMVPD_WRITE_TO_PNOR | |
| unset PVPD_READ_FROM_HW | |
| unset PVPD_WRITE_TO_HW | |
| set PVPD_READ_FROM_PNOR | |
| set PVPD_WRITE_TO_PNOR | |
| unset CDIMM_FORMAT_FOR_CVPD | |
| # gpio config | |
| set GPIODD | |
| unset PALMETTO_VDDR | |
| # Disable SBE updates | |
| unset SBE_UPDATE_INDEPENDENT | |
| unset SBE_UPDATE_SEQUENTIAL | |
| set NO_SBE_UPDATES | |
| unset PCIE_HOTPLUG_CONTROLLER | |
| # turn on console output | |
| set CONSOLE | |
| set BMC_AST2500 | |
| set DISABLE_HOSTBOOT_RUNTIME | |
| # Compile in hostboot runtime PRD | |
| set HBRT_PRD | |
| unset HTMGT | |
| unset START_OCC_DURING_BOOT | |
| #PNOR flags | |
| unset PNOR_TWO_SIDE_SUPPORT | |
| unset BMC_BT_LPC_IPMI | |
| # Disable Checktop Analysis | |
| unset ENABLE_CHECKSTOP_ANALYSIS | |
| unset IPLTIME_CHECKSTOP_ANALYSIS | |
| # Hostboot will not detect hardware changes | |
| unset HOST_HCDB_SUPPORT | |
| # set for trace debug to console | |
| set CONSOLE_OUTPUT_TRACE | |
| unset CONFIG_SECUREBOOT | |
| unset CONFIG_TPMDD | |
| unset CONFIG_TPM_NUVOTON |