| # The Serial Flash Controller is the AST2400 BMC. |
| set SFC_IS_AST2500 |
| unset SFC_IS_AST2400 |
| unset BMC_DOES_SFC_INIT |
| unset SFC_IS_IBM_DPSS |
| set ALLOW_MICRON_PNOR |
| set ALLOW_MACRONIX_PNOR |
| |
| # VPD options. |
| set MVPD_READ_FROM_HW |
| set MVPD_WRITE_TO_HW |
| set MVPD_READ_FROM_PNOR |
| set MVPD_WRITE_TO_PNOR |
| set DJVPD_READ_FROM_HW |
| set DJVPD_WRITE_TO_HW |
| set DJVPD_READ_FROM_PNOR |
| set DJVPD_WRITE_TO_PNOR |
| unset MEMVPD_READ_FROM_HW |
| unset MEMVPD_WRITE_TO_HW |
| set MEMVPD_READ_FROM_PNOR |
| set MEMVPD_WRITE_TO_PNOR |
| unset PVPD_READ_FROM_HW |
| unset PVPD_WRITE_TO_HW |
| set PVPD_READ_FROM_PNOR |
| set PVPD_WRITE_TO_PNOR |
| unset CDIMM_FORMAT_FOR_CVPD |
| |
| # gpio config |
| set GPIODD |
| unset PALMETTO_VDDR |
| |
| # Disable SBE updates |
| unset SBE_UPDATE_INDEPENDENT |
| unset SBE_UPDATE_SEQUENTIAL |
| set NO_SBE_UPDATES |
| |
| unset PCIE_HOTPLUG_CONTROLLER |
| |
| # turn on console output |
| set CONSOLE |
| set BMC_AST2500 |
| |
| set DISABLE_HOSTBOOT_RUNTIME |
| |
| # Compile in hostboot runtime PRD |
| set HBRT_PRD |
| unset HTMGT |
| unset START_OCC_DURING_BOOT |
| |
| #PNOR flags |
| unset PNOR_TWO_SIDE_SUPPORT |
| |
| unset BMC_BT_LPC_IPMI |
| |
| # Disable Checktop Analysis |
| unset ENABLE_CHECKSTOP_ANALYSIS |
| unset IPLTIME_CHECKSTOP_ANALYSIS |
| |
| # Hostboot will not detect hardware changes |
| unset HOST_HCDB_SUPPORT |
| |
| # set for trace debug to console |
| unset CONSOLE_OUTPUT_TRACE |
| |
| unset CONFIG_SECUREBOOT |
| unset CONFIG_TPMDD |
| unset CONFIG_TPM_NUVOTON |