Stewart Smith | e4ab21b | 2018-02-28 12:05:00 +1100 | [diff] [blame] | 1 | Release Notes for OpenPower Firmware v1.21 |
| 2 | ========================================== |
| 3 | |
| 4 | This release is NOT intended for GA POWER9 platforms, for that, op-build |
| 5 | v2.0 is *required*. |
| 6 | |
| 7 | Known Issues |
| 8 | ------------ |
| 9 | |
| 10 | - Special Wakeup will error out, causing 'sensors' utility and |
| 11 | fast-reboot to not work if cores are in stop states. |
| 12 | - stop11 is disabled |
| 13 | |
| 14 | Updated Packages |
| 15 | ---------------- |
| 16 | |
| 17 | +-------------+-------------+-------------+----------------------------------+ |
| 18 | | Package | Old Version | New Version | Platforms | |
| 19 | +=============+=============+=============+==================================+ |
| 20 | | busybox | 1.27.1 | 1.27.2 | barreley,firenze,firestone, | |
| 21 | | | | | garrison,habanero, | |
| 22 | | | | | openpower_mambo, | |
| 23 | | | | | openpower_p9_mambo,p9dsu, | |
| 24 | | | | | palmetto,pseries,witherspoon, | |
| 25 | | | | | zaius,zz,romulus | |
| 26 | +-------------+-------------+-------------+----------------------------------+ |
Stewart Smith | 2953001 | 2018-03-01 18:35:10 +1100 | [diff] [blame] | 27 | | capp-ucode | p9-dd2-v2 | p9-dd2-v3 | barreleye,firestone,garrison, | |
| 28 | | | | | habanero,p9dsu,palmetto, | |
| 29 | | | | | witherspoon,zaius,romulus | |
Stewart Smith | e4ab21b | 2018-02-28 12:05:00 +1100 | [diff] [blame] | 30 | +-------------+-------------+-------------+----------------------------------+ |
| 31 | | ethtool | 4.10 | 4.13 | barreleye,firenze,firestone, | |
| 32 | | | | | garrison,habanero, | |
| 33 | | | | | openpower_mambo, | |
| 34 | | | | | openpower_p9_mambo,p9dsu, | |
| 35 | | | | | palmetto,pseries,witherspoon, | |
| 36 | | | | | zaius,zz,romulus | |
| 37 | +-------------+-------------+-------------+----------------------------------+ |
| 38 | | eudev | 3.2.2 | 3.2.4 | barreleye,firenze,firestone, | |
| 39 | | | | | garrison,habanero, | |
| 40 | | | | | openpower_mambo, | |
| 41 | | | | | openpower_p9_mambo,p9dsu, | |
| 42 | | | | | palmetto,pseries,witherspoon, | |
| 43 | | | | | zaius,zz,romulus | |
| 44 | +-------------+-------------+-------------+----------------------------------+ |
| 45 | | glibc | 2.25 | 2.26-73 | barreleye,firenze,firestone, | |
| 46 | | | | -g4b692 | garrison,habanero, | |
| 47 | | | | | openpower_mambo, | |
| 48 | | | | | openpower_p9_mambo,p9dsu, | |
| 49 | | | | | palmetto,pseries,witherspoon, | |
| 50 | | | | | zaius,zz,romulus | |
| 51 | +-------------+-------------+-------------+----------------------------------+ |
| 52 | | hostboot | 695bd891343 | d3025f5d7dd | barreleye,firestone,garrison, | |
| 53 | | | | | habanero,palmeto | |
| 54 | +-------------+-------------+-------------+----------------------------------+ |
| 55 | | hostboot | 6a4ab65a875 | 28927a78ca4 | p9dsu,witherspoon,zaius,romulus | |
| 56 | +-------------+-------------+-------------+----------------------------------+ |
| 57 | | hostboot | 25ebcad0c40 | 6924d6b711b | barreleye,firestone,garrison, | |
| 58 | | -binaries | | | habanero,p9dsu,palmetto, | |
| 59 | | | | | witherspoon,zaius,romulus | |
| 60 | +-------------+-------------+-------------+----------------------------------+ |
| 61 | | ima-catalog | 48ce3f26d2b | 01b26a136da | barreleye,firestone,garrison, | |
| 62 | | | | | habanero,p9dsu,palmetto, | |
| 63 | | | | | witherspoon,zaius,romulus | |
| 64 | +-------------+-------------+-------------+----------------------------------+ |
| 65 | | iprutils | 2.4.14.1 | 2.4.15.1 | barreleye,firenze,firestone, | |
| 66 | | | | | garrison,habanero, | |
| 67 | | | | | openpower_mambo, | |
| 68 | | | | | openpower_p9_mambo, | |
| 69 | | | | | p9dsu,palmetto,pseries, | |
| 70 | | | | | witherspoon,zaius,zz,romulus | |
| 71 | +-------------+-------------+-------------+----------------------------------+ |
| 72 | | kexec-lite | 86e45a47e8c | 87d044a895b | barreleye,firenze,firestone, | |
| 73 | | | | | garrison,habanero, | |
| 74 | | | | | openpower_mambo, | |
| 75 | | | | | openpower_p9_mambo, | |
| 76 | | | | | p9dsu,palmetto,pseries, | |
| 77 | | | | | witherspoon,zaius,zz,romulus | |
| 78 | +-------------+-------------+-------------+----------------------------------+ |
| 79 | | libflash | v5.8-123 | v5.9-166 | barreleye,firenze,firestone, | |
| 80 | | | -gc06ed5 | -g70f14f | garrison,habanero,p9dsu,palmetto,| |
| 81 | | | | | pseries,witherspoon,zaius,zz, | |
| 82 | | | | | romulus | |
| 83 | +-------------+-------------+-------------+----------------------------------+ |
| 84 | | linux | 4.13.8 | 4.14.20 | barreleye,firenze,firestone, | |
| 85 | | | | | garrison,habanero, | |
| 86 | | | | | openpower_mambo, | |
| 87 | | | | | openpower_p9_mambo,p9dsu, | |
| 88 | | | | | palmetto,pseries,witherspoon, | |
| 89 | | | | | zaius,zz,romulus | |
| 90 | +-------------+-------------+-------------+----------------------------------+ |
| 91 | | linux | 4.13.8 | 4.14.20 | barreleye,firenze,firestone, | |
| 92 | | -headers | | | garrison,habanero, | |
| 93 | | | | | openpower_mambo, | |
| 94 | | | | | openpower_p9_mambo,p9dsu, | |
| 95 | | | | | palmetto,pseries,witherspoon, | |
| 96 | | | | | zaius,zz,romulus | |
| 97 | +-------------+-------------+-------------+----------------------------------+ |
| 98 | | lvm2 | 2.02.171 | 2.02.173 | barreleye,firenze,firestone, | |
| 99 | | | | | garrison,habanero, | |
| 100 | | | | | openpower_mambo, | |
| 101 | | | | | openpower_p9_mambo, | |
| 102 | | | | | p9dsu,palmetto,pseries, | |
| 103 | | | | | witherspoon,zaius,zz,romulus | |
| 104 | +-------------+-------------+-------------+----------------------------------+ |
| 105 | | machine-xml | c6d2767a13f | fb5f9334aa0 | p9dsu | |
| 106 | +-------------+-------------+-------------+----------------------------------+ |
| 107 | | machine-xml | 8633e11cd39 | b788f99848d | romulus | |
| 108 | +-------------+-------------+-------------+----------------------------------+ |
| 109 | | machine-xml | 785c625a2a0 | 58554bfabd7 | witherspoon | |
| 110 | +-------------+-------------+-------------+----------------------------------+ |
| 111 | | machine-xml | 22ce15f13c4 | b0884b3032d | zaius | |
| 112 | +-------------+-------------+-------------+----------------------------------+ |
| 113 | | mdadm | 3.3.4 | 4.0 | barreleye,firenze,firestone, | |
| 114 | | | | | garrison,habanero, | |
| 115 | | | | | openpower_mambo, | |
| 116 | | | | | openpower_p9_mambo, | |
| 117 | | | | | p9dsu,palmetto,pseries, | |
| 118 | | | | | witherspoon,zaius,zz,romulus | |
| 119 | +-------------+-------------+-------------+----------------------------------+ |
| 120 | | occ | 7449acdc8bf | f72f857b7e5 | p9dsu,witherspoon,zaius,romulus | |
| 121 | +-------------+-------------+-------------+----------------------------------+ |
| 122 | | openpower- | 21d66daff69 | b210f15c699 | barreleye,firestone,garrison, | |
| 123 | | pnor | | | habanero,p9dsu,palmetto, | |
| 124 | | | | | witherspoon,zaius,romulus | |
| 125 | +-------------+-------------+-------------+----------------------------------+ |
| 126 | | petiboot | v1.6.2 | v1.6.6 | barreleye,firenze,firestone, | |
| 127 | | | | | garrison,habanero, | |
| 128 | | | | | openpower_mambo, | |
| 129 | | | | | openpower_p9_mambo, | |
| 130 | | | | | p9dsu,palmetto,pseries, | |
| 131 | | | | | witherspoon,zaius,zz,romulus | |
| 132 | +-------------+-------------+-------------+----------------------------------+ |
| 133 | | sbe | 76a7eb9956b | 0aae9a8e68a | p9dsu,witherspoon,zaius,zz, | |
| 134 | | | | | romulus | |
| 135 | +-------------+-------------+-------------+----------------------------------+ |
| 136 | | skiboot | v5.9 | v5.10 | barreleye,firenze,firestone, | |
| 137 | | | | | garrison,habanero, | |
| 138 | | | | | openpower_mambo, | |
| 139 | | | | | openpower_p9_mambo, | |
| 140 | | | | | p9dsu,palmetto,pseries, | |
| 141 | | | | | witherspoon,zaius,zz,romulus | |
| 142 | +-------------+-------------+-------------+----------------------------------+ |
| 143 | | util-linux | 2.30.1 | 2.31 | barreleye,firenze,firestone, | |
| 144 | | | | | garrison,habanero, | |
| 145 | | | | | openpower_mambo, | |
| 146 | | | | | openpower_p9_mambo,p9dsu, | |
| 147 | | | | | palmetto,pseries,witherspoon, | |
| 148 | | | | | zaius,zz,romulus | |
| 149 | +-------------+-------------+-------------+----------------------------------+ |
| 150 | |
| 151 | New Packages |
| 152 | ------------ |
| 153 | |
| 154 | +-----------+-----------+-------------+ |
| 155 | | Package | Version | Platforms | |
| 156 | +===========+===========+=============+ |
| 157 | +-----------+-----------+-------------+ |
| 158 | |
| 159 | Removed Packages |
| 160 | ---------------- |
| 161 | |
| 162 | +-----------+-----------+-------------+ |
| 163 | | Package | Version | Platforms | |
| 164 | +===========+===========+=============+ |
| 165 | +-----------+-----------+-------------+ |
| 166 | |
| 167 | Package: barreleye-xml |
| 168 | ---------------------- |
| 169 | |
| 170 | `Repository <https://github.com/open-power/barreleye-xml>`__ |
| 171 | |
| 172 | Patches |
| 173 | ~~~~~~~ |
| 174 | |
| 175 | Commits |
| 176 | ~~~~~~~ |
| 177 | |
| 178 | No changes. ## Package: firestone-xml |
| 179 | `Repository <https://github.com/open-power/firestone-xml>`__ |
| 180 | |
| 181 | Patches |
| 182 | ~~~~~~~ |
| 183 | |
| 184 | Commits |
| 185 | ~~~~~~~ |
| 186 | |
| 187 | No changes. ## Package: garrison-xml |
| 188 | `Repository <https://github.com/open-power/garrison-xml>`__ |
| 189 | |
| 190 | Patches |
| 191 | ~~~~~~~ |
| 192 | |
| 193 | Commits |
| 194 | ~~~~~~~ |
| 195 | |
| 196 | No changes. ## Package: habanero-xml |
| 197 | `Repository <https://github.com/open-power/habanero-xml>`__ |
| 198 | |
| 199 | Patches |
| 200 | ~~~~~~~ |
| 201 | |
| 202 | Commits |
| 203 | ~~~~~~~ |
| 204 | |
| 205 | No changes. ## Package: hostboot |
| 206 | `Repository <https://github.com/open-power/hostboot>`__ |
| 207 | |
| 208 | Patches |
| 209 | ~~~~~~~ |
| 210 | |
| 211 | Commits |
| 212 | ~~~~~~~ |
| 213 | |
| 214 | Adam Hale (3): \* |
| 215 | `9fec69bc023c <https://github.com/open-power/hostboot/commit/9fec69bc023c>`__ |
| 216 | Remove psave init for firmware blacklist \* |
| 217 | `6e847113eb96 <https://github.com/open-power/hostboot/commit/6e847113eb96>`__ |
| 218 | Expand PGPE optrace to Main Mem - No fnctl coreq rqmt image build vs |
| 219 | hcode \* |
| 220 | `d8083fad5ac1 <https://github.com/open-power/hostboot/commit/d8083fad5ac1>`__ |
| 221 | Move PGPE optrace buffer to main memory |
| 222 | |
| 223 | Adriana Kobylak (1): \* |
| 224 | `17e278a6ec39 <https://github.com/open-power/hostboot/commit/17e278a6ec39>`__ |
| 225 | PnorUtils.pm: Add volatile flag |
| 226 | |
| 227 | Alpana Kumari (1): \* |
| 228 | `663aae09de40 <https://github.com/open-power/hostboot/commit/663aae09de40>`__ |
| 229 | Fix in filter Unwanted Attribute script |
| 230 | |
| 231 | Amit Tendolkar (5): \* |
| 232 | `c06de50b3c21 <https://github.com/open-power/hostboot/commit/c06de50b3c21>`__ |
| 233 | STOP Recovery: Misc infra. updates to enable PM FFDC in HOMER \* |
| 234 | `a202d4b0af85 <https://github.com/open-power/hostboot/commit/a202d4b0af85>`__ |
| 235 | Enhance SBE Deadman FFDC Format and sequencing \* |
| 236 | `db7de0c59ffc <https://github.com/open-power/hostboot/commit/db7de0c59ffc>`__ |
| 237 | Change PPE State FFDC into a human readable format in eSEL/PEL \* |
| 238 | `7067a4180ed6 <https://github.com/open-power/hostboot/commit/7067a4180ed6>`__ |
| 239 | Cache/Core stop clocks: add shut down of Power Management to remove |
| 240 | contentions \* |
| 241 | `cff2ddbb3e9d <https://github.com/open-power/hostboot/commit/cff2ddbb3e9d>`__ |
| 242 | Extend PM Reset flow to collect PM FFDC to HOMER |
| 243 | |
| 244 | Andre Marin (6): \* |
| 245 | `1439d34bee09 <https://github.com/open-power/hostboot/commit/1439d34bee09>`__ |
| 246 | Update memory error xml information \* |
| 247 | `aa313fb234e1 <https://github.com/open-power/hostboot/commit/aa313fb234e1>`__ |
| 248 | Update HPW Level for MSS API library \* |
| 249 | `d6f46067ee8d <https://github.com/open-power/hostboot/commit/d6f46067ee8d>`__ |
| 250 | Add empty wr\_crc files for HB to mirror \* |
| 251 | `fd207a3412f2 <https://github.com/open-power/hostboot/commit/fd207a3412f2>`__ |
| 252 | Update HPW Level for MSS API library \* |
| 253 | `8c104ea1e919 <https://github.com/open-power/hostboot/commit/8c104ea1e919>`__ |
| 254 | Add VPD lookup to build a supported frequency list, and bin-down support |
| 255 | \* |
| 256 | `a7311993a7c8 <https://github.com/open-power/hostboot/commit/a7311993a7c8>`__ |
| 257 | Enable FFDC logging for mss\_freq for real VPD accessing fails |
| 258 | |
| 259 | Anusha Reddy Rangareddygari (2): \* |
| 260 | `4471b2a5baa5 <https://github.com/open-power/hostboot/commit/4471b2a5baa5>`__ |
| 261 | p9\_setup\_sbe\_config \* |
| 262 | `6e0c67270fb4 <https://github.com/open-power/hostboot/commit/6e0c67270fb4>`__ |
| 263 | Level 2 HWP for p9\_sbe\_dump |
| 264 | |
| 265 | Ben Gass (4): \* |
| 266 | `a06edcedafcf <https://github.com/open-power/hostboot/commit/a06edcedafcf>`__ |
| 267 | Adding p9c\_11 support. \* |
| 268 | `52c557d1409b <https://github.com/open-power/hostboot/commit/52c557d1409b>`__ |
| 269 | Adding p9a support. \* |
| 270 | `15569e9de5a8 <https://github.com/open-power/hostboot/commit/15569e9de5a8>`__ |
| 271 | Shorten A-link timers for sim. Add polling for A-link training. \* |
| 272 | `7d8227db605d <https://github.com/open-power/hostboot/commit/7d8227db605d>`__ |
| 273 | Re-submit Axone updates |
| 274 | |
| 275 | Benjamin Weisenbeck (13): \* |
| 276 | `f77b89e3527e <https://github.com/open-power/hostboot/commit/f77b89e3527e>`__ |
| 277 | Adjust ATTR\_PEER\_TARGET values for runtime \* |
| 278 | `68e2f99dbe29 <https://github.com/open-power/hostboot/commit/68e2f99dbe29>`__ |
| 279 | erepair VPD access bug fixes \* |
| 280 | `34813cc8c52a <https://github.com/open-power/hostboot/commit/34813cc8c52a>`__ |
| 281 | PRD: Enable erepair vpd access procedures \* |
| 282 | `9b4e25447bb1 <https://github.com/open-power/hostboot/commit/9b4e25447bb1>`__ |
| 283 | Call xbus restore erepair in istep 9 \* |
| 284 | `9b826df04888 <https://github.com/open-power/hostboot/commit/9b826df04888>`__ |
| 285 | PRD: Fix missing clear of pll errors \* |
| 286 | `7288c1f95ebb <https://github.com/open-power/hostboot/commit/7288c1f95ebb>`__ |
| 287 | PRD: Disable Cen PLL Domain until required plugin functions are defined |
| 288 | \* |
| 289 | `1b258924a049 <https://github.com/open-power/hostboot/commit/1b258924a049>`__ |
| 290 | PRD: Define extra registers for Cumulus chip \* |
| 291 | `f46a51570e9f <https://github.com/open-power/hostboot/commit/f46a51570e9f>`__ |
| 292 | PRD: Power Management Recovery \* |
| 293 | `056c43ed3e5a <https://github.com/open-power/hostboot/commit/056c43ed3e5a>`__ |
| 294 | PRD: Dynamic Memory Deallocation \* |
| 295 | `8411dba53c3b <https://github.com/open-power/hostboot/commit/8411dba53c3b>`__ |
| 296 | PRD: Add calls to perform dynamic memory deallocation \* |
| 297 | `ffc30dcc9134 <https://github.com/open-power/hostboot/commit/ffc30dcc9134>`__ |
| 298 | PRD: Disabling FSP clearing/masking of FIRs to avoid blacklist |
| 299 | violations \* |
| 300 | `6cb8ac2dc748 <https://github.com/open-power/hostboot/commit/6cb8ac2dc748>`__ |
| 301 | PRD: Move MC\_ADDR\_TRANS register definition to MCA \* |
| 302 | `a3eee11e4e9e <https://github.com/open-power/hostboot/commit/a3eee11e4e9e>`__ |
| 303 | Fix PEER\_TARGET addr translation issue following HBRT reset |
| 304 | |
| 305 | Bhimsen G Kulkarni (1): \* |
| 306 | `c037b71deb05 <https://github.com/open-power/hostboot/commit/c037b71deb05>`__ |
| 307 | MAX\_COMPUTE\_NODE\_PER\_SYSTEM attribute support for Zeppelin. |
| 308 | |
| 309 | Bill Hoffa (16): \* |
| 310 | `84d4eb8da450 <https://github.com/open-power/hostboot/commit/84d4eb8da450>`__ |
| 311 | Take MFG mode into account before entering reconfig loop \* |
| 312 | `48b14aae8704 <https://github.com/open-power/hostboot/commit/48b14aae8704>`__ |
| 313 | Fix genHwsvMrwXml.pl setting of MSS\_MRW\_REFRESH\_RATE\_REQUEST \* |
| 314 | `13863b512ac2 <https://github.com/open-power/hostboot/commit/13863b512ac2>`__ |
| 315 | Add call\_host\_set\_voltages to istep 08.12 \* |
| 316 | `f7a5547478ea <https://github.com/open-power/hostboot/commit/f7a5547478ea>`__ |
| 317 | Interrupt Handling Flow Change to Prevent Deadlock \* |
| 318 | `038d61af4611 <https://github.com/open-power/hostboot/commit/038d61af4611>`__ |
| 319 | Update Bbuild to b0117a\_1802.911 \* |
| 320 | `cb444552aeba <https://github.com/open-power/hostboot/commit/cb444552aeba>`__ |
| 321 | Multi-Drawer (IPC) Interrupt/Messaging Support \* |
| 322 | `82805770e035 <https://github.com/open-power/hostboot/commit/82805770e035>`__ |
| 323 | Fix simulation get all registers command \* |
| 324 | `9925aa358f2a <https://github.com/open-power/hostboot/commit/9925aa358f2a>`__ |
| 325 | Remove @INC with current directory from create\_ekb\_targattr.pl \* |
| 326 | `e77f8551f4a6 <https://github.com/open-power/hostboot/commit/e77f8551f4a6>`__ |
| 327 | Handle INTRP SHUT\_DOWN message in MBOX IPC msg\_hdlr \* |
| 328 | `39157523786b <https://github.com/open-power/hostboot/commit/39157523786b>`__ |
| 329 | Set Memory Enabled Bit for all Procs with Valid Memory \* |
| 330 | `294a73d38078 <https://github.com/open-power/hostboot/commit/294a73d38078>`__ |
| 331 | Re-order INTR/IPC shutdown message handling \* |
| 332 | `d20c2cb2d2b2 <https://github.com/open-power/hostboot/commit/d20c2cb2d2b2>`__ |
| 333 | Properly handle INTRP unmask error handling \* |
| 334 | `9efdc04854a9 <https://github.com/open-power/hostboot/commit/9efdc04854a9>`__ |
| 335 | Allow --with-backtrace for hb-Ps on Simics Command Line \* |
| 336 | `ed4753f93086 <https://github.com/open-power/hostboot/commit/ed4753f93086>`__ |
| 337 | Enable fsidd testcases for Cumulus model \* |
| 338 | `77b70bb7119c <https://github.com/open-power/hostboot/commit/77b70bb7119c>`__ |
| 339 | Enable sbeio runtime testcases \* |
| 340 | `8acb64aeb8e4 <https://github.com/open-power/hostboot/commit/8acb64aeb8e4>`__ |
| 341 | Enable Scom + Targeting unit tests for Cumulus model |
| 342 | |
| 343 | Brian Bakke (10): \* |
| 344 | `0abd9ab92d13 <https://github.com/open-power/hostboot/commit/0abd9ab92d13>`__ |
| 345 | Story 173854 - Hostboot service to run phb perst procedure \* |
| 346 | `7adcd16c12ad <https://github.com/open-power/hostboot/commit/7adcd16c12ad>`__ |
| 347 | Story 180760 - Use self restore API to disable ATTN in HID ... \* |
| 348 | `7181b751b4d0 <https://github.com/open-power/hostboot/commit/7181b751b4d0>`__ |
| 349 | Error loading p9\_phbPerst \* |
| 350 | `5353e40a1ad9 <https://github.com/open-power/hostboot/commit/5353e40a1ad9>`__ |
| 351 | Story 179465 - Smarter HBBL id handling ... \* |
| 352 | `3a88f18bc738 <https://github.com/open-power/hostboot/commit/3a88f18bc738>`__ |
| 353 | Enable ATTN prior to OPAL handoff \* |
| 354 | `b98033264ca7 <https://github.com/open-power/hostboot/commit/b98033264ca7>`__ |
| 355 | Increase error log size to 4K for obmc systems \* |
| 356 | `024dc9b9a203 <https://github.com/open-power/hostboot/commit/024dc9b9a203>`__ |
| 357 | malformed conditional errors with new ODE \* |
| 358 | `5e8ed1d75c2a <https://github.com/open-power/hostboot/commit/5e8ed1d75c2a>`__ |
| 359 | Bad target parsing in attributeOverride tool \* |
| 360 | `59c8ce01244b <https://github.com/open-power/hostboot/commit/59c8ce01244b>`__ |
| 361 | CAPP GARD Records cleared on Witherspoon \* |
| 362 | `5b7b2ed56a6f <https://github.com/open-power/hostboot/commit/5b7b2ed56a6f>`__ |
| 363 | Fix and codify how system and node targets are handled by attribute |
| 364 | overrides |
| 365 | |
| 366 | Brian Stegmiller (3): \* |
| 367 | `1eba8f47f718 <https://github.com/open-power/hostboot/commit/1eba8f47f718>`__ |
| 368 | Avoid assert on invalid target types for PRD and HWP PLID association \* |
| 369 | `4296f3972550 <https://github.com/open-power/hostboot/commit/4296f3972550>`__ |
| 370 | HB Attribute for IPL chkstop analysis \* |
| 371 | `adc84473391d <https://github.com/open-power/hostboot/commit/adc84473391d>`__ |
| 372 | PRD: Call hostboot for SBE errors |
| 373 | |
| 374 | Brian Vanderpool (5): \* |
| 375 | `2c84b69258b2 <https://github.com/open-power/hostboot/commit/2c84b69258b2>`__ |
| 376 | Disable Pulsed Resclk mode \* |
| 377 | `3c9fe01a0255 <https://github.com/open-power/hostboot/commit/3c9fe01a0255>`__ |
| 378 | PM: Mask CME LFIR Bits 13:19 - they are only used for characterization |
| 379 | \* |
| 380 | `d3ecbc680817 <https://github.com/open-power/hostboot/commit/d3ecbc680817>`__ |
| 381 | Initial check-in of p9\_cme\_sram\_access \* |
| 382 | `c5117f9ce933 <https://github.com/open-power/hostboot/commit/c5117f9ce933>`__ |
| 383 | PM: Ignore allow\_reg\_wakeup in cache contained mode \* |
| 384 | `0c093d57ac2a <https://github.com/open-power/hostboot/commit/0c093d57ac2a>`__ |
| 385 | PM - use OJCFG[6] instead of OCR[10] to halt the 405 before reset |
| 386 | |
| 387 | CHRISTINA L. GRAVES (7): \* |
| 388 | `102eb384558d <https://github.com/open-power/hostboot/commit/102eb384558d>`__ |
| 389 | Adding target for lco\_m, changed flags, changed INF to DBG \* |
| 390 | `f01a301bb626 <https://github.com/open-power/hostboot/commit/f01a301bb626>`__ |
| 391 | p9\_adu\_access and p9\_adu\_setup L2 procedures \* |
| 392 | `3cb9bab7b62a <https://github.com/open-power/hostboot/commit/3cb9bab7b62a>`__ |
| 393 | Changes in error handling to stop the read/write as soon as an error |
| 394 | occurs \* |
| 395 | `d3defd59a697 <https://github.com/open-power/hostboot/commit/d3defd59a697>`__ |
| 396 | Changes in ecc data fixing so reading and writing works \* |
| 397 | `a656e358f1a1 <https://github.com/open-power/hostboot/commit/a656e358f1a1>`__ |
| 398 | ADU HWP updates for CI support, performance \* |
| 399 | `c77a01844e73 <https://github.com/open-power/hostboot/commit/c77a01844e73>`__ |
| 400 | ADU Level 3 code, changed owner to Josh, and added comments \* |
| 401 | `159389c0b656 <https://github.com/open-power/hostboot/commit/159389c0b656>`__ |
| 402 | PBA Level 3 code, changed owner to Josh, and added comments |
| 403 | |
| 404 | Caleb Palmer (24): \* |
| 405 | `7f4fb82f60a5 <https://github.com/open-power/hostboot/commit/7f4fb82f60a5>`__ |
| 406 | PRD: Fix infinite loop when handling MPEs \* |
| 407 | `219a0628c4f8 <https://github.com/open-power/hostboot/commit/219a0628c4f8>`__ |
| 408 | PRD: MPE Add VCM Event at MDIA \* |
| 409 | `ca3990cbf857 <https://github.com/open-power/hostboot/commit/ca3990cbf857>`__ |
| 410 | PRD: Update handleRrFo \* |
| 411 | `d2f72e803860 <https://github.com/open-power/hostboot/commit/d2f72e803860>`__ |
| 412 | PRD: Fix sym count overflow in runtime TPS \* |
| 413 | `ad724500847e <https://github.com/open-power/hostboot/commit/ad724500847e>`__ |
| 414 | PRD: Init PRD in enableAttns \* |
| 415 | `fec3fa592c19 <https://github.com/open-power/hostboot/commit/fec3fa592c19>`__ |
| 416 | PRD: Use chip's Galois code when writing chip marks \* |
| 417 | `78baac3b72b0 <https://github.com/open-power/hostboot/commit/78baac3b72b0>`__ |
| 418 | PRD: Ban TPS after Maint UEs \* |
| 419 | `d30453f1107c <https://github.com/open-power/hostboot/commit/d30453f1107c>`__ |
| 420 | PRD: Default iv\_stoppedRank should be MCA not MCBIST \* |
| 421 | `8c8e212108f6 <https://github.com/open-power/hostboot/commit/8c8e212108f6>`__ |
| 422 | PRD: Capture IUE Counts for FFDC \* |
| 423 | `e21201436665 <https://github.com/open-power/hostboot/commit/e21201436665>`__ |
| 424 | PRD: Fix skipping TPS ban after Maint UEs \* |
| 425 | `b0255985c87e <https://github.com/open-power/hostboot/commit/b0255985c87e>`__ |
| 426 | PRD: Make sure IUE bit is set after threshold \* |
| 427 | `c32b0a4eb864 <https://github.com/open-power/hostboot/commit/c32b0a4eb864>`__ |
| 428 | PRD: Reenable restore dram repairs \* |
| 429 | `1d862697f0b1 <https://github.com/open-power/hostboot/commit/1d862697f0b1>`__ |
| 430 | PRD: Mask mainline CEs after TPS is banned \* |
| 431 | `aa5e361a94c9 <https://github.com/open-power/hostboot/commit/aa5e361a94c9>`__ |
| 432 | MDIA: Fix overwriting rc from restoreDramRepairs \* |
| 433 | `4ba260490a2f <https://github.com/open-power/hostboot/commit/4ba260490a2f>`__ |
| 434 | PRD: Make sure iv\_stoppedRank is set in handleCmdComplete \* |
| 435 | `e029420eaf65 <https://github.com/open-power/hostboot/commit/e029420eaf65>`__ |
| 436 | PRD: RCD parity error broadcast mode workaround \* |
| 437 | `ef1d51e23675 <https://github.com/open-power/hostboot/commit/ef1d51e23675>`__ |
| 438 | Bad DQ bits compare ECC and spare fix \* |
| 439 | `5320c4c323d2 <https://github.com/open-power/hostboot/commit/5320c4c323d2>`__ |
| 440 | Fix bad DQ bits translation \* |
| 441 | `371ca0eb55ae <https://github.com/open-power/hostboot/commit/371ca0eb55ae>`__ |
| 442 | Add attribute for row repair data \* |
| 443 | `4a33c3221672 <https://github.com/open-power/hostboot/commit/4a33c3221672>`__ |
| 444 | PRD: Restore repairs fix bad dimm mask check \* |
| 445 | `b94740d30931 <https://github.com/open-power/hostboot/commit/b94740d30931>`__ |
| 446 | Bad dq bitmap vpd write fixes \* |
| 447 | `2a7e12d18b20 <https://github.com/open-power/hostboot/commit/2a7e12d18b20>`__ |
| 448 | Callout DIMM if bad dq set in mnfg mode \* |
| 449 | `21d980956449 <https://github.com/open-power/hostboot/commit/21d980956449>`__ |
| 450 | Reenable reconfig loop for new bad dq data \* |
| 451 | `e7c2ef327998 <https://github.com/open-power/hostboot/commit/e7c2ef327998>`__ |
| 452 | Fix bad dq wiring data translation |
| 453 | |
| 454 | Chris Cain (7): \* |
| 455 | `4e72331566db <https://github.com/open-power/hostboot/commit/4e72331566db>`__ |
| 456 | HTMGT: Do not validate throttles based on oversubscription \* |
| 457 | `beeeedc75591 <https://github.com/open-power/hostboot/commit/beeeedc75591>`__ |
| 458 | HTMGT: Pass utilization in hundredth units to HWP for mem throttling \* |
| 459 | `a1f431ee3a68 <https://github.com/open-power/hostboot/commit/a1f431ee3a68>`__ |
| 460 | HTMGT: Ensure processor callout added when going to safe mode \* |
| 461 | `02098ca7d9c1 <https://github.com/open-power/hostboot/commit/02098ca7d9c1>`__ |
| 462 | HTMGT: Pass power per DIMM to memory throttling procedures \* |
| 463 | `83243d5bbb3d <https://github.com/open-power/hostboot/commit/83243d5bbb3d>`__ |
| 464 | HTMGT: Send power supply redundancy policy to OCC \* |
| 465 | `c16744bed525 <https://github.com/open-power/hostboot/commit/c16744bed525>`__ |
| 466 | HTMGT: Mark GPU as functional when present \* |
| 467 | `2af7a69ada93 <https://github.com/open-power/hostboot/commit/2af7a69ada93>`__ |
| 468 | HTMGT: Bias values need to be applied to frequencies |
| 469 | |
| 470 | Chris Steffen (3): \* |
| 471 | `8c705a49a9f4 <https://github.com/open-power/hostboot/commit/8c705a49a9f4>`__ |
| 472 | Initial Abus Commit \* |
| 473 | `0f2ac854f66a <https://github.com/open-power/hostboot/commit/0f2ac854f66a>`__ |
| 474 | Updated Obus Interface \* |
| 475 | `bbd317375f82 <https://github.com/open-power/hostboot/commit/bbd317375f82>`__ |
| 476 | I/O Metadata Cleanup |
| 477 | |
| 478 | Christian Geddes (41): \* |
| 479 | `ac7f3d7b4b95 <https://github.com/open-power/hostboot/commit/ac7f3d7b4b95>`__ |
| 480 | Re-enable fapi2 test case module \* |
| 481 | `6f456343a42a <https://github.com/open-power/hostboot/commit/6f456343a42a>`__ |
| 482 | Clean up things that were left after updating to simics nimbus 2.0 \* |
| 483 | `7ac94ae277b9 <https://github.com/open-power/hostboot/commit/7ac94ae277b9>`__ |
| 484 | Add EXTRAINCDIR to phb\_perst makefile \* |
| 485 | `47f275a6bd3b <https://github.com/open-power/hostboot/commit/47f275a6bd3b>`__ |
| 486 | Gard out EX when CME HALT ERROR is hit \* |
| 487 | `9e703b5d526c <https://github.com/open-power/hostboot/commit/9e703b5d526c>`__ |
| 488 | Add HW425526 and HW425027 \* |
| 489 | `43b86b565ad7 <https://github.com/open-power/hostboot/commit/43b86b565ad7>`__ |
| 490 | During MPIPL check if SBE has set Hyp HRMOR in blComm area \* |
| 491 | `2727e5272f13 <https://github.com/open-power/hostboot/commit/2727e5272f13>`__ |
| 492 | No longer pass master ex to HWSV as is no longer needed in p9 \* |
| 493 | `5ef559321401 <https://github.com/open-power/hostboot/commit/5ef559321401>`__ |
| 494 | Move bbuild up to b1109a\_1746.910 and remove workaround \* |
| 495 | `4bfe046e2f8b <https://github.com/open-power/hostboot/commit/4bfe046e2f8b>`__ |
| 496 | Use readSeeprom PSU chipop to get SBE seeprom image version \* |
| 497 | `397dacc3e9ad <https://github.com/open-power/hostboot/commit/397dacc3e9ad>`__ |
| 498 | Remove annoying mbox traces (TRACF -> TRACD) \* |
| 499 | `c5c12e6e0ae9 <https://github.com/open-power/hostboot/commit/c5c12e6e0ae9>`__ |
| 500 | Add RTC to remind us to allow sending readSeeprom op to slave SBE \* |
| 501 | `6bc72e2973d1 <https://github.com/open-power/hostboot/commit/6bc72e2973d1>`__ |
| 502 | Remove limit on max size of PNOR TOC \* |
| 503 | `ce376fc3f4c7 <https://github.com/open-power/hostboot/commit/ce376fc3f4c7>`__ |
| 504 | Set hostboot\_mode bit on P3PC interrupt scom reg during intrrp init \* |
| 505 | `9f3429c04561 <https://github.com/open-power/hostboot/commit/9f3429c04561>`__ |
| 506 | TI w/ unrecoverable error if system boots w/ mismatching processors \* |
| 507 | `a9a0baba8c4c <https://github.com/open-power/hostboot/commit/a9a0baba8c4c>`__ |
| 508 | Add option to Mask off SBE bits on TP\_LOCAL\_FIR \* |
| 509 | `a6d6b5da3da4 <https://github.com/open-power/hostboot/commit/a6d6b5da3da4>`__ |
| 510 | Make SBE\_MISCOMPARE\_WITH\_MASTER\_VERSION errors informational \* |
| 511 | `8299008e6196 <https://github.com/open-power/hostboot/commit/8299008e6196>`__ |
| 512 | Re-enable Broadcast mode \* |
| 513 | `4f6092708bc8 <https://github.com/open-power/hostboot/commit/4f6092708bc8>`__ |
| 514 | Add no\_export to DMI\_INBAND attributes \* |
| 515 | `fd12b61b55f2 <https://github.com/open-power/hostboot/commit/fd12b61b55f2>`__ |
| 516 | Add hbHypCommArea struct to end of Hostboot Data reserved mem section \* |
| 517 | `779a1c3444a3 <https://github.com/open-power/hostboot/commit/779a1c3444a3>`__ |
| 518 | Read the hb/hyp comm area to see if hyp moved hrmor \* |
| 519 | `aedc6f0a892e <https://github.com/open-power/hostboot/commit/aedc6f0a892e>`__ |
| 520 | Add comments for hb/hypervisor communication struct and remove TODO \* |
| 521 | `8b95aa4ffafe <https://github.com/open-power/hostboot/commit/8b95aa4ffafe>`__ |
| 522 | Increase size allocated for HBRT section in Pnor from 4.5 -> 6.0 MB \* |
| 523 | `25cb28c5a6cf <https://github.com/open-power/hostboot/commit/25cb28c5a6cf>`__ |
| 524 | Set MSS\_MRW\_MEMDIAGS\_BCMODE to be overrideOnly \* |
| 525 | `fc6895bd0a84 <https://github.com/open-power/hostboot/commit/fc6895bd0a84>`__ |
| 526 | Remove writable from Power Slope Centaur Attributes \* |
| 527 | `e5cb7887f8b7 <https://github.com/open-power/hostboot/commit/e5cb7887f8b7>`__ |
| 528 | Remove writable property from ATTR\_LINK\_TRAIN \* |
| 529 | `4592e5a256c4 <https://github.com/open-power/hostboot/commit/4592e5a256c4>`__ |
| 530 | Add FABRIC\_PRESENT\_GROUPS system attribute \* |
| 531 | `1e15041b86ab <https://github.com/open-power/hostboot/commit/1e15041b86ab>`__ |
| 532 | Remove obus workaround from call\_proc\_chiplet\_fabric\_scominit \* |
| 533 | `0761000af3d1 <https://github.com/open-power/hostboot/commit/0761000af3d1>`__ |
| 534 | During MPIPL expand memory size to be FULL\_CACHE right away \* |
| 535 | `bba738e7b179 <https://github.com/open-power/hostboot/commit/bba738e7b179>`__ |
| 536 | Compute PAYLOAD\_BASE attr based on phys\_addr passed from PHYP \* |
| 537 | `66ce95b8de1f <https://github.com/open-power/hostboot/commit/66ce95b8de1f>`__ |
| 538 | Remove is\_master conditional from getVersionInfo in sbe\_update \* |
| 539 | `ae0fa99d821a <https://github.com/open-power/hostboot/commit/ae0fa99d821a>`__ |
| 540 | Remove setting flipPort in processProc \* |
| 541 | `de1c2d1d9e39 <https://github.com/open-power/hostboot/commit/de1c2d1d9e39>`__ |
| 542 | Remove annoying traces from target generation code \* |
| 543 | `aff61dd84b01 <https://github.com/open-power/hostboot/commit/aff61dd84b01>`__ |
| 544 | Add sbe\_retry\_handler to FIFO fail path \* |
| 545 | `ae1ac07ebcac <https://github.com/open-power/hostboot/commit/ae1ac07ebcac>`__ |
| 546 | Zero out Cumulus related virtual address attribute during MPIPL \* |
| 547 | `02b1fd73c568 <https://github.com/open-power/hostboot/commit/02b1fd73c568>`__ |
| 548 | Save away SBE FFDC and COMM area address in corresponding attrs \* |
| 549 | `32a051104ae9 <https://github.com/open-power/hostboot/commit/32a051104ae9>`__ |
| 550 | Always have secureModeDisable bit set to 0 in sbe\_retry\_handler \* |
| 551 | `0752d042e8fc <https://github.com/open-power/hostboot/commit/0752d042e8fc>`__ |
| 552 | Set PAYLOAD\_KIND attribute based on fused bits in scom register \* |
| 553 | `864e746259e4 <https://github.com/open-power/hostboot/commit/864e746259e4>`__ |
| 554 | Add attribute to give platform more control over PM\_RESET \* |
| 555 | `35165b347625 <https://github.com/open-power/hostboot/commit/35165b347625>`__ |
| 556 | Remove all explicit calls to special\_wakeup from hostboot code \* |
| 557 | `b542fd639299 <https://github.com/open-power/hostboot/commit/b542fd639299>`__ |
| 558 | Enable platSpecialWakeup during IPL time and add support \* |
| 559 | `18a7e1928bde <https://github.com/open-power/hostboot/commit/18a7e1928bde>`__ |
| 560 | Use ATTR\_SKIP\_WAKEUP to determine what we do for PM reset |
| 561 | |
| 562 | Christian R. Geddes (1): \* |
| 563 | `42e96493c5fa <https://github.com/open-power/hostboot/commit/42e96493c5fa>`__ |
| 564 | Revert "Add HW425526 and HW425027" |
| 565 | |
| 566 | Christopher D Hanudel (1): \* |
| 567 | `fd82f7002d2d <https://github.com/open-power/hostboot/commit/fd82f7002d2d>`__ |
| 568 | RNG DD2 Hostboot: Sim data showed needed parm update so ST fail at 50% |
| 569 | entropy |
| 570 | |
| 571 | Claus Michael Olsen (15): \* |
| 572 | `d0343c2f1ae6 <https://github.com/open-power/hostboot/commit/d0343c2f1ae6>`__ |
| 573 | Centaur ring support - TOR API \* |
| 574 | `86f2ee342aa0 <https://github.com/open-power/hostboot/commit/86f2ee342aa0>`__ |
| 575 | Small change to dd container header file. \* |
| 576 | `cc6ec7c9087b <https://github.com/open-power/hostboot/commit/cc6ec7c9087b>`__ |
| 577 | HW425038 INT ARX timeout workaround - Updated initfiles to 49241 \* |
| 578 | `0d63966b4333 <https://github.com/open-power/hostboot/commit/0d63966b4333>`__ |
| 579 | Update: xip\_tool: Introducing image section type (IST). \* |
| 580 | `385c30e4905d <https://github.com/open-power/hostboot/commit/385c30e4905d>`__ |
| 581 | Support for PPE commit 49883 to error out on non-TOR ring section. \* |
| 582 | `b78b33c5a32a <https://github.com/open-power/hostboot/commit/b78b33c5a32a>`__ |
| 583 | Code restruct: TOR API \* |
| 584 | `fecd2a64f5b4 <https://github.com/open-power/hostboot/commit/fecd2a64f5b4>`__ |
| 585 | Override filter ring support for perv\_pll\_bndy\_bucket rings. \* |
| 586 | `80ef0f2bbe20 <https://github.com/open-power/hostboot/commit/80ef0f2bbe20>`__ |
| 587 | Removing P9\_XIP\_ITEM\_NOT\_FOUND trace out msg from p9\_xip\_image.C |
| 588 | \* |
| 589 | `4864902e62b1 <https://github.com/open-power/hostboot/commit/4864902e62b1>`__ |
| 590 | Adding CT\_P9A to the enum list of chip types. \* |
| 591 | `21c7d72548e5 <https://github.com/open-power/hostboot/commit/21c7d72548e5>`__ |
| 592 | p9\_dd\_container: Introducing DD container API lib to PPE repo \* |
| 593 | `c1c9e46c0846 <https://github.com/open-power/hostboot/commit/c1c9e46c0846>`__ |
| 594 | xip\_customize and TOR API: Improved DD level verification \* |
| 595 | `975d6f745c83 <https://github.com/open-power/hostboot/commit/975d6f745c83>`__ |
| 596 | Moving DD specific ring coord from TOR to XIP (step 2) \* |
| 597 | `c9ad324035c7 <https://github.com/open-power/hostboot/commit/c9ad324035c7>`__ |
| 598 | Additional risk level support - (step 1) Backward compatibility \* |
| 599 | `648da43c862b <https://github.com/open-power/hostboot/commit/648da43c862b>`__ |
| 600 | Fix to TOR API failure on 32b systems \* |
| 601 | `7316af3dc8a8 <https://github.com/open-power/hostboot/commit/7316af3dc8a8>`__ |
| 602 | Bug fix to TOR API to not check TOR header version against TOR\_VERSION |
| 603 | |
| 604 | Corey Swenson (5): \* |
| 605 | `887d17b52472 <https://github.com/open-power/hostboot/commit/887d17b52472>`__ |
| 606 | Fix memd\_creation file input and output paths \* |
| 607 | `f17ee1ff96ba <https://github.com/open-power/hostboot/commit/f17ee1ff96ba>`__ |
| 608 | Put editimgid into fsp.tar \* |
| 609 | `665c9a18838f <https://github.com/open-power/hostboot/commit/665c9a18838f>`__ |
| 610 | Fix for MDIA timeouts on Cumulus step 14.1 \* |
| 611 | `52ca8121f1ed <https://github.com/open-power/hostboot/commit/52ca8121f1ed>`__ |
| 612 | Leave MCS acker open until Istep14 \* |
| 613 | `afa7087e71fe <https://github.com/open-power/hostboot/commit/afa7087e71fe>`__ |
| 614 | Cumulus updates and testcase workarounds |
| 615 | |
| 616 | Dan Crowell (29): \* |
| 617 | `7535501dada9 <https://github.com/open-power/hostboot/commit/7535501dada9>`__ |
| 618 | Remove extra trace from multicast workaround code \* |
| 619 | `8b06214f873b <https://github.com/open-power/hostboot/commit/8b06214f873b>`__ |
| 620 | Allow fuzzy matches to WOF tables in Simics \* |
| 621 | `e62b88fdb3a5 <https://github.com/open-power/hostboot/commit/e62b88fdb3a5>`__ |
| 622 | Temp remove sbeio\_rt from HBRT image to get space back \* |
| 623 | `e0672626472a <https://github.com/open-power/hostboot/commit/e0672626472a>`__ |
| 624 | Put libsbeio\_rt back into HBRT \* |
| 625 | `9a2e268f1799 <https://github.com/open-power/hostboot/commit/9a2e268f1799>`__ |
| 626 | Fix makefile syntax issue in vpd makefile \* |
| 627 | `e3cc786e08ab <https://github.com/open-power/hostboot/commit/e3cc786e08ab>`__ |
| 628 | Stop parsing IVRM attributes for ZZ \* |
| 629 | `dfdf4bee880f <https://github.com/open-power/hostboot/commit/dfdf4bee880f>`__ |
| 630 | Remove invalid access to TARGETING::EntityPath in base image \* |
| 631 | `453d38aa29e4 <https://github.com/open-power/hostboot/commit/453d38aa29e4>`__ |
| 632 | Revert ATTR\_CEN\_ECID back to ATTR\_ECID \* |
| 633 | `56a7903c3dff <https://github.com/open-power/hostboot/commit/56a7903c3dff>`__ |
| 634 | Allow VPD writes to memory cache at runtime \* |
| 635 | `c75929bb0e53 <https://github.com/open-power/hostboot/commit/c75929bb0e53>`__ |
| 636 | Add Fallback Frequency for #V Bucket Selection \* |
| 637 | `cf31061a2d76 <https://github.com/open-power/hostboot/commit/cf31061a2d76>`__ |
| 638 | Remove bad istep-to-istep library dependency \* |
| 639 | `8392e4f60660 <https://github.com/open-power/hostboot/commit/8392e4f60660>`__ |
| 640 | Set response size equal to request size for FSP messages \* |
| 641 | `8be0be91a852 <https://github.com/open-power/hostboot/commit/8be0be91a852>`__ |
| 642 | Dummy commit to pull in prereq for FSP CI failure \* |
| 643 | `1dce3206aa21 <https://github.com/open-power/hostboot/commit/1dce3206aa21>`__ |
| 644 | Increase trace buffer size to avoid hang between traces and PRD \* |
| 645 | `59c08f915474 <https://github.com/open-power/hostboot/commit/59c08f915474>`__ |
| 646 | Remove distracting error message for fallback #V freq \* |
| 647 | `0d8527ec60f3 <https://github.com/open-power/hostboot/commit/0d8527ec60f3>`__ |
| 648 | Fixes for Runtime VPD Write messages \* |
| 649 | `7f8aa4b7a017 <https://github.com/open-power/hostboot/commit/7f8aa4b7a017>`__ |
| 650 | Tweaks to multicast scom workaround \* |
| 651 | `1e973575493d <https://github.com/open-power/hostboot/commit/1e973575493d>`__ |
| 652 | Expand Hostboot to 64MB \* |
| 653 | `b1534d2eee2f <https://github.com/open-power/hostboot/commit/b1534d2eee2f>`__ |
| 654 | Add default for PROC\_REFCLOCK to be 133333 \* |
| 655 | `04d354188da8 <https://github.com/open-power/hostboot/commit/04d354188da8>`__ |
| 656 | Change ATTR\_MSS\_WR\_VREF\_OFFSET to be override-only \* |
| 657 | `400b3066f785 <https://github.com/open-power/hostboot/commit/400b3066f785>`__ |
| 658 | Remove i2c lock calls for vpd writes at runtime \* |
| 659 | `caaafc02d588 <https://github.com/open-power/hostboot/commit/caaafc02d588>`__ |
| 660 | Commit errors for VPD writes as visible logs \* |
| 661 | `29b02eface84 <https://github.com/open-power/hostboot/commit/29b02eface84>`__ |
| 662 | Always set RISK\_LEVEL regardless of value \* |
| 663 | `093246224655 <https://github.com/open-power/hostboot/commit/093246224655>`__ |
| 664 | Set ATTR\_RISK\_LEVEL based on scratch reg bits \* |
| 665 | `c80dab12a855 <https://github.com/open-power/hostboot/commit/c80dab12a855>`__ |
| 666 | Switch polarity of return data for perst commands \* |
| 667 | `328e7f781d6d <https://github.com/open-power/hostboot/commit/328e7f781d6d>`__ |
| 668 | Remove extraneous error messages for multicast scoms \* |
| 669 | `528b3930d63a <https://github.com/open-power/hostboot/commit/528b3930d63a>`__ |
| 670 | Increase poll wait time for SBE PSU operations \* |
| 671 | `11cb66583553 <https://github.com/open-power/hostboot/commit/11cb66583553>`__ |
| 672 | Fix VPD lookup in Firmware boots \* |
| 673 | `59b62178dc81 <https://github.com/open-power/hostboot/commit/59b62178dc81>`__ |
| 674 | Disabling WOF and VDM for Nimbus DD2.0 |
| 675 | |
| 676 | Daniel Howe (8): \* |
| 677 | `7fc0a8c51bfe <https://github.com/open-power/hostboot/commit/7fc0a8c51bfe>`__ |
| 678 | Allow lpc\_ed for p9n 2.2 per HW418117 fix \* |
| 679 | `ebd63e0fbdad <https://github.com/open-power/hostboot/commit/ebd63e0fbdad>`__ |
| 680 | update data token init to use scans on p9c 1.1 \* |
| 681 | `40a7f282bb78 <https://github.com/open-power/hostboot/commit/40a7f282bb78>`__ |
| 682 | disable pb tl when not in use \* |
| 683 | `9bebbc7433c7 <https://github.com/open-power/hostboot/commit/9bebbc7433c7>`__ |
| 684 | HW399448 set correct mode bit \* |
| 685 | `83bb585ecafb <https://github.com/open-power/hostboot/commit/83bb585ecafb>`__ |
| 686 | update pb data x on token ring init procedure \* |
| 687 | `da0c66a0fee5 <https://github.com/open-power/hostboot/commit/da0c66a0fee5>`__ |
| 688 | Update alink ras settings \* |
| 689 | `08b4146e8dc8 <https://github.com/open-power/hostboot/commit/08b4146e8dc8>`__ |
| 690 | Extend xbus oc expiration timers and updated epsilon for fleetwood \* |
| 691 | `8c18b32b0a59 <https://github.com/open-power/hostboot/commit/8c18b32b0a59>`__ |
| 692 | Reconcile epsilon w/ latest FBC latency document |
| 693 | |
| 694 | David Kauer (3): \* |
| 695 | `e67892d9ce11 <https://github.com/open-power/hostboot/commit/e67892d9ce11>`__ |
| 696 | HW425038 INT ARX timeout workaround \* |
| 697 | `7b43e07c5fb3 <https://github.com/open-power/hostboot/commit/7b43e07c5fb3>`__ |
| 698 | Modify INT FIR configuration settings \* |
| 699 | `a62b221b2fc8 <https://github.com/open-power/hostboot/commit/a62b221b2fc8>`__ |
| 700 | INT FIR Mask fix for Nimbus DD2.0 |
| 701 | |
| 702 | Dean Sanner (16): \* |
| 703 | `08d89ba2b878 <https://github.com/open-power/hostboot/commit/08d89ba2b878>`__ |
| 704 | Remove support for P9N (Nimbus) DD1.0 \* |
| 705 | `5b272bf3f232 <https://github.com/open-power/hostboot/commit/5b272bf3f232>`__ |
| 706 | Fix PNOR sections loaded into reserve-mem for non secure sys \* |
| 707 | `97f6525326d7 <https://github.com/open-power/hostboot/commit/97f6525326d7>`__ |
| 708 | Control Host reboots for manufacturing \* |
| 709 | `6407898fc569 <https://github.com/open-power/hostboot/commit/6407898fc569>`__ |
| 710 | Connect CDIMM power/slope ATTR with VPD accessor function \* |
| 711 | `1233c105dfd1 <https://github.com/open-power/hostboot/commit/1233c105dfd1>`__ |
| 712 | Various targeting fixes for Fleetwood system \* |
| 713 | `99f0ee037491 <https://github.com/open-power/hostboot/commit/99f0ee037491>`__ |
| 714 | Fleetwood dimm numbering fixes \* |
| 715 | `4606e773441d <https://github.com/open-power/hostboot/commit/4606e773441d>`__ |
| 716 | Factor in fabric group on multinode systems \* |
| 717 | `480f31bfceaa <https://github.com/open-power/hostboot/commit/480f31bfceaa>`__ |
| 718 | Correct Obus buckets math: one, not zero based \* |
| 719 | `9225a7cd9cfa <https://github.com/open-power/hostboot/commit/9225a7cd9cfa>`__ |
| 720 | Only enable TCEs on drawer 0 for multinode \* |
| 721 | `7b2ee59900c6 <https://github.com/open-power/hostboot/commit/7b2ee59900c6>`__ |
| 722 | Fixes for multinode istep 21.1 \* |
| 723 | `a8b5cf553026 <https://github.com/open-power/hostboot/commit/a8b5cf553026>`__ |
| 724 | Tweak IBM SFC flash settings for Micron chips \* |
| 725 | `34ff810fcb79 <https://github.com/open-power/hostboot/commit/34ff810fcb79>`__ |
| 726 | Remove excessive tracing from AttrRP \* |
| 727 | `6751a4860243 <https://github.com/open-power/hostboot/commit/6751a4860243>`__ |
| 728 | Default to full cache usage during early Hostboot \* |
| 729 | `305fcd051d53 <https://github.com/open-power/hostboot/commit/305fcd051d53>`__ |
| 730 | Updates to make multinode IPC work \* |
| 731 | `fe7571698e85 <https://github.com/open-power/hostboot/commit/fe7571698e85>`__ |
| 732 | Increase SBE FIFO delay timeout \* |
| 733 | `1eac1bea6c09 <https://github.com/open-power/hostboot/commit/1eac1bea6c09>`__ |
| 734 | Close race condition in multi instance IPC |
| 735 | |
| 736 | Donald Washburn (2): \* |
| 737 | `5e731ccc76d4 <https://github.com/open-power/hostboot/commit/5e731ccc76d4>`__ |
| 738 | Work around for SCOM DMI bug on Cumulus. \* |
| 739 | `621ab58f2f53 <https://github.com/open-power/hostboot/commit/621ab58f2f53>`__ |
| 740 | Integration of hardware vpd accessor functions into Hostboot. |
| 741 | |
| 742 | Dzuy Nguyen (1): \* |
| 743 | `c71ed1c41450 <https://github.com/open-power/hostboot/commit/c71ed1c41450>`__ |
| 744 | Add support for OBUS PLL buckets |
| 745 | |
| 746 | Elizabeth Liner (14): \* |
| 747 | `7f75425745f0 <https://github.com/open-power/hostboot/commit/7f75425745f0>`__ |
| 748 | Moving SBE threshold handler to its own file \* |
| 749 | `351f3287bba4 <https://github.com/open-power/hostboot/commit/351f3287bba4>`__ |
| 750 | Create base class structure for SbeRetryHandler \* |
| 751 | `18f9c896aa1e <https://github.com/open-power/hostboot/commit/18f9c896aa1e>`__ |
| 752 | Fixing the SBE switch functionality \* |
| 753 | `010d6a9a091b <https://github.com/open-power/hostboot/commit/010d6a9a091b>`__ |
| 754 | Adding more debugging traces to the SBE error handler \* |
| 755 | `e29c5cfdb62c <https://github.com/open-power/hostboot/commit/e29c5cfdb62c>`__ |
| 756 | SBE error logging and handler cleanup \* |
| 757 | `a147e5838156 <https://github.com/open-power/hostboot/commit/a147e5838156>`__ |
| 758 | Unit tests for SbeRetryHandler \* |
| 759 | `cf89b876a3d4 <https://github.com/open-power/hostboot/commit/cf89b876a3d4>`__ |
| 760 | Adding SbeRetryHandler to the runtime module \* |
| 761 | `a334e5aa3f11 <https://github.com/open-power/hostboot/commit/a334e5aa3f11>`__ |
| 762 | Add in a check in the PSU error logging for SBE failure \* |
| 763 | `2e5deae5db69 <https://github.com/open-power/hostboot/commit/2e5deae5db69>`__ |
| 764 | Add call to get the SBE RC and commit it to an error log \* |
| 765 | `6b43bcadea88 <https://github.com/open-power/hostboot/commit/6b43bcadea88>`__ |
| 766 | Adding advanced restart logic after detecting vital attentions \* |
| 767 | `7c679624bbb1 <https://github.com/open-power/hostboot/commit/7c679624bbb1>`__ |
| 768 | Fixing timeout error in PSU code - removing hang \* |
| 769 | `7136fd9b50af <https://github.com/open-power/hostboot/commit/7136fd9b50af>`__ |
| 770 | Cleaning up git tree from memd\_creation.pl \* |
| 771 | `ddfe08755562 <https://github.com/open-power/hostboot/commit/ddfe08755562>`__ |
| 772 | Fixing SBE PSU error messages \* |
| 773 | `1e337a9565c8 <https://github.com/open-power/hostboot/commit/1e337a9565c8>`__ |
| 774 | Moving Sbe Retry Handler work to common file for runtime |
| 775 | |
| 776 | Greg Still (10): \* |
| 777 | `a2d52141acb9 <https://github.com/open-power/hostboot/commit/a2d52141acb9>`__ |
| 778 | PM: Disable core hang buster \* |
| 779 | `361addb254f6 <https://github.com/open-power/hostboot/commit/361addb254f6>`__ |
| 780 | Pstate Parameter Block/Setup Evid: Safe Pstate Fix \* |
| 781 | `dc276ea88de6 <https://github.com/open-power/hostboot/commit/dc276ea88de6>`__ |
| 782 | PM: Fix p9\_setup\_evid for manual voltage overrides \* |
| 783 | `d02b0a626e2f <https://github.com/open-power/hostboot/commit/d02b0a626e2f>`__ |
| 784 | PM: OCC Pstate Parm Block comments for minimum frequency and Pstate |
| 785 | being safe \* |
| 786 | `42937caa1ce4 <https://github.com/open-power/hostboot/commit/42937caa1ce4>`__ |
| 787 | WOF/Pstates: HOMER VFRT rounding fix and Safe Mode Freq -> Pstate fix \* |
| 788 | `8cdeae021f82 <https://github.com/open-power/hostboot/commit/8cdeae021f82>`__ |
| 789 | VDM: PSAFE needs a default setting if #W VDM leads to VDM disablement \* |
| 790 | `430115962900 <https://github.com/open-power/hostboot/commit/430115962900>`__ |
| 791 | WOF: VFRT biasing based on ATTR\_FREQ\_BIAS\_\ * * |
| 792 | `862087b9cf1a <https://github.com/open-power/hostboot/commit/862087b9cf1a>`__ |
| 793 | WOF: Pass PGPE VPD IQ good normal core per sort for WOF Phase 2 \* |
| 794 | `54a8d9a839e8 <https://github.com/open-power/hostboot/commit/54a8d9a839e8>`__ |
| 795 | PM: Use auto-special wake-up to cover PM complex reset window \* |
| 796 | `2b999014ed98 <https://github.com/open-power/hostboot/commit/2b999014ed98>`__ |
| 797 | PM: fix special wake-up LMCR check for auto mode |
| 798 | |
| 799 | Ilya Smirnov (14): \* |
| 800 | `a56250e422be <https://github.com/open-power/hostboot/commit/a56250e422be>`__ |
| 801 | Strip commas and quotes from PEL data string in eSEL.pl \* |
| 802 | `6b229a55e244 <https://github.com/open-power/hostboot/commit/6b229a55e244>`__ |
| 803 | Correct the timestamp in istep 16.2 \* |
| 804 | `c4d83bcbb421 <https://github.com/open-power/hostboot/commit/c4d83bcbb421>`__ |
| 805 | Deliver NIMBUS and CUMULUS standalone images to fips for Simics |
| 806 | regression \* |
| 807 | `03e13ded8724 <https://github.com/open-power/hostboot/commit/03e13ded8724>`__ |
| 808 | Populate hb Runtime Data after OCC Starts \* |
| 809 | `e7fd8e4f5b01 <https://github.com/open-power/hostboot/commit/e7fd8e4f5b01>`__ |
| 810 | Post-process hb timestamps in eSEL.pl \* |
| 811 | `d37246879463 <https://github.com/open-power/hostboot/commit/d37246879463>`__ |
| 812 | Populate ATTR\_FABRIC\_PRESENT\_GROUPS \* |
| 813 | `e51716b15f79 <https://github.com/open-power/hostboot/commit/e51716b15f79>`__ |
| 814 | Fix Timestamp Search for eSEL.pl \* |
| 815 | `6e7bb893b400 <https://github.com/open-power/hostboot/commit/6e7bb893b400>`__ |
| 816 | Load MEMD Partition in Itep 7.3 \* |
| 817 | `4bcfb10e2752 <https://github.com/open-power/hostboot/commit/4bcfb10e2752>`__ |
| 818 | Remove Istep 10.3 From IPL Flow \* |
| 819 | `4648dad462fd <https://github.com/open-power/hostboot/commit/4648dad462fd>`__ |
| 820 | Populate the Severity of PLAT Errors \* |
| 821 | `05736e87c0ec <https://github.com/open-power/hostboot/commit/05736e87c0ec>`__ |
| 822 | Check TYPE\_NODE Targets Twice for Serial/Part Number Updates \* |
| 823 | `d9c127dca831 <https://github.com/open-power/hostboot/commit/d9c127dca831>`__ |
| 824 | Error when hb tries to access reserved memory past limit \* |
| 825 | `f89ef7412495 <https://github.com/open-power/hostboot/commit/f89ef7412495>`__ |
| 826 | Pass Actual SecureRom size in HDAT to OPAL \* |
| 827 | `94d559d6c39a <https://github.com/open-power/hostboot/commit/94d559d6c39a>`__ |
| 828 | Add SECBOOT Partition Back to PNOR |
| 829 | |
| 830 | Jacob Harvey (4): \* |
| 831 | `cf5d76cbc891 <https://github.com/open-power/hostboot/commit/cf5d76cbc891>`__ |
| 832 | Set blue waterfall range to 1-4 for all freqs \* |
| 833 | `7fa961df6429 <https://github.com/open-power/hostboot/commit/7fa961df6429>`__ |
| 834 | Fix sim problems on awan \* |
| 835 | `e0cdfdda35d6 <https://github.com/open-power/hostboot/commit/e0cdfdda35d6>`__ |
| 836 | Create xlate equality function for dimm kind \* |
| 837 | `f7dfd17dfc99 <https://github.com/open-power/hostboot/commit/f7dfd17dfc99>`__ |
| 838 | Fix RCW structure and make a default option |
| 839 | |
| 840 | Jayashankar Padath (1): \* |
| 841 | `7f0962881ce0 <https://github.com/open-power/hostboot/commit/7f0962881ce0>`__ |
| 842 | HDAT : Update in feature flag structure value |
| 843 | |
| 844 | Jaymes Wilks (14): \* |
| 845 | `cb260675de9f <https://github.com/open-power/hostboot/commit/cb260675de9f>`__ |
| 846 | Secure Boot: HBBL partition support [FSP] \* |
| 847 | `5fa02a909075 <https://github.com/open-power/hostboot/commit/5fa02a909075>`__ |
| 848 | Support selecting fips or op-build for signing process \* |
| 849 | `f7b3c79d2b2a <https://github.com/open-power/hostboot/commit/f7b3c79d2b2a>`__ |
| 850 | Secure Boot: SBKT partition support [FSP] \* |
| 851 | `eaf4ca605f7b <https://github.com/open-power/hostboot/commit/eaf4ca605f7b>`__ |
| 852 | Create new test only PNOR section to test secure Load/Unloads \* |
| 853 | `ba9cad2c031b <https://github.com/open-power/hostboot/commit/ba9cad2c031b>`__ |
| 854 | Create better anti-deadlock strategy for vfs \* |
| 855 | `fa2acdeb7202 <https://github.com/open-power/hostboot/commit/fa2acdeb7202>`__ |
| 856 | Change FIPS build genPnorImages.pl constant back to 0x40000000 \* |
| 857 | `04dca99153ca <https://github.com/open-power/hostboot/commit/04dca99153ca>`__ |
| 858 | Stop deconfiguring magic MCA and its MCBIST by association \* |
| 859 | `79abc8362186 <https://github.com/open-power/hostboot/commit/79abc8362186>`__ |
| 860 | Make FCO cores distribute evenly among processors \* |
| 861 | `2a032fa76a4e <https://github.com/open-power/hostboot/commit/2a032fa76a4e>`__ |
| 862 | Continue to run simics on lack of write access for trace files \* |
| 863 | `c1d8f52bb296 <https://github.com/open-power/hostboot/commit/c1d8f52bb296>`__ |
| 864 | Fix failures to boot with unsecured mode \* |
| 865 | `9bfb2013af39 <https://github.com/open-power/hostboot/commit/9bfb2013af39>`__ |
| 866 | Add HW callout mapping to target subsystem table \* |
| 867 | `eb4da4cd0830 <https://github.com/open-power/hostboot/commit/eb4da4cd0830>`__ |
| 868 | Make reconfig loop failures unrecoverable only in istep mode \* |
| 869 | `24252f0e54b0 <https://github.com/open-power/hostboot/commit/24252f0e54b0>`__ |
| 870 | Fix developer and customer descriptions for TPM required policy \* |
| 871 | `6a2a94e232d8 <https://github.com/open-power/hostboot/commit/6a2a94e232d8>`__ |
| 872 | Add callout for unresponsive TPMs |
| 873 | |
| 874 | Jennifer A. Stofer (1): \* |
| 875 | `a8ef67b96804 <https://github.com/open-power/hostboot/commit/a8ef67b96804>`__ |
| 876 | Revert "Adding p9a support." |
| 877 | |
| 878 | Jenny Huynh (2): \* |
| 879 | `b9374cdc6edc <https://github.com/open-power/hostboot/commit/b9374cdc6edc>`__ |
| 880 | Workaround for Quaint Gate, Angry Reindeer \* |
| 881 | `43736aca31cf <https://github.com/open-power/hostboot/commit/43736aca31cf>`__ |
| 882 | Updating HW414700 to also apply to Cumulus DD10 |
| 883 | |
| 884 | Joachim Fenkes (3): \* |
| 885 | `6731aa248737 <https://github.com/open-power/hostboot/commit/6731aa248737>`__ |
| 886 | p9\_sbe\_npll\_setup: Enable Spread Spectrum right after SS PLL lock \* |
| 887 | `aed6647b5f80 <https://github.com/open-power/hostboot/commit/aed6647b5f80>`__ |
| 888 | p9\*\_clockcntl: Add missing NPU ring 0xF in N3 chiplet to clock check |
| 889 | \* |
| 890 | `b8ebffe6e6a4 <https://github.com/open-power/hostboot/commit/b8ebffe6e6a4>`__ |
| 891 | HDCT: Remove core trace arrays, permanent P9 erratum |
| 892 | |
| 893 | Joe McGill (35): \* |
| 894 | `44881dc3727c <https://github.com/open-power/hostboot/commit/44881dc3727c>`__ |
| 895 | L2 - Fabric updates for multi-chip support \* |
| 896 | `d704be991b7f <https://github.com/open-power/hostboot/commit/d704be991b7f>`__ |
| 897 | L2 HWPs -- p9\_smp\_link\_layer and p9\_fab\_iovalid \* |
| 898 | `4e12e90c06fd <https://github.com/open-power/hostboot/commit/4e12e90c06fd>`__ |
| 899 | L2 - Fabric updates for multi-chip support \* |
| 900 | `f10a3f6c0902 <https://github.com/open-power/hostboot/commit/f10a3f6c0902>`__ |
| 901 | IO, FBC updates to enable ABUS for Fleetwood \* |
| 902 | `af548636493d <https://github.com/open-power/hostboot/commit/af548636493d>`__ |
| 903 | p9c.mc.scan.initfle -- initial release \* |
| 904 | `d6c5b55b7f06 <https://github.com/open-power/hostboot/commit/d6c5b55b7f06>`__ |
| 905 | cen\_stopclocks update \* |
| 906 | `1bf7f7464012 <https://github.com/open-power/hostboot/commit/1bf7f7464012>`__ |
| 907 | Shift HWP content to align with desired EKB layout \* |
| 908 | `73859ef374f2 <https://github.com/open-power/hostboot/commit/73859ef374f2>`__ |
| 909 | update owner comments in ADU, PBA, TOD HWPs \* |
| 910 | `f46fb4538247 <https://github.com/open-power/hostboot/commit/f46fb4538247>`__ |
| 911 | p9.filter.pll.scan.intifile -- set 0 BGoffset for P9C DD1.1 \* |
| 912 | `def5778ba314 <https://github.com/open-power/hostboot/commit/def5778ba314>`__ |
| 913 | remove NV iovalid assertion from FW and add scan inits to resolve glsmux |
| 914 | xstate \* |
| 915 | `47a980c12cf7 <https://github.com/open-power/hostboot/commit/47a980c12cf7>`__ |
| 916 | mvpd\_access\_defs.H -- add enum for AW keyword access \* |
| 917 | `83fecdb69bbd <https://github.com/open-power/hostboot/commit/83fecdb69bbd>`__ |
| 918 | create empty shells for initfiles coming under 50468 \* |
| 919 | `2209292ea1a7 <https://github.com/open-power/hostboot/commit/2209292ea1a7>`__ |
| 920 | Chip address extension workaround for HW423589 (option2), part1 \* |
| 921 | `74cc36c5dd03 <https://github.com/open-power/hostboot/commit/74cc36c5dd03>`__ |
| 922 | Chip address extension workaround for HW423589 (option2), part2 \* |
| 923 | `6782a20d9c7c <https://github.com/open-power/hostboot/commit/6782a20d9c7c>`__ |
| 924 | p9\_mss\_eff\_grouping -- fix mirrored memory mapping bug introduced by |
| 925 | 49290 \* |
| 926 | `2b0de939d297 <https://github.com/open-power/hostboot/commit/2b0de939d297>`__ |
| 927 | support customized application of filter PLL buckets from AW MVPD |
| 928 | keyword \* |
| 929 | `547e7f8b0493 <https://github.com/open-power/hostboot/commit/547e7f8b0493>`__ |
| 930 | p9\_mss\_eff\_grouping -- fix multi-group mirrored mapping bug |
| 931 | introduced by 49290 \* |
| 932 | `0041dd78c705 <https://github.com/open-power/hostboot/commit/0041dd78c705>`__ |
| 933 | cen\_initf\_errors.xml -- initial release \* |
| 934 | `20a0e8bd621b <https://github.com/open-power/hostboot/commit/20a0e8bd621b>`__ |
| 935 | disable ECC bypass for Cumulus DD1.0 \* |
| 936 | `f7fb6d73a88d <https://github.com/open-power/hostboot/commit/f7fb6d73a88d>`__ |
| 937 | apply rings from Centaur HW image \* |
| 938 | `63167adf8994 <https://github.com/open-power/hostboot/commit/63167adf8994>`__ |
| 939 | MCD disable workaround for HW423589 (option1) \* |
| 940 | `d65acc669a10 <https://github.com/open-power/hostboot/commit/d65acc669a10>`__ |
| 941 | checkstop on MCD UE when extended addressing mode is enabled \* |
| 942 | `142e05201115 <https://github.com/open-power/hostboot/commit/142e05201115>`__ |
| 943 | Disable read data delay for Cumulus DD1.0, enable for DD1.1 \* |
| 944 | `02e505b4c437 <https://github.com/open-power/hostboot/commit/02e505b4c437>`__ |
| 945 | p9\_fab\_iovalid -- secure ABUS mailboxes after iovalid is asserted \* |
| 946 | `5343e0808f17 <https://github.com/open-power/hostboot/commit/5343e0808f17>`__ |
| 947 | fix ADU setup for MCD disabled operation \* |
| 948 | `d2c3cd5ab8ce <https://github.com/open-power/hostboot/commit/d2c3cd5ab8ce>`__ |
| 949 | p9\_pcie\_config -- MCD disable updates \* |
| 950 | `cc2d45afa61c <https://github.com/open-power/hostboot/commit/cc2d45afa61c>`__ |
| 951 | p9\_xbus\_fir\_utils.H -- create header for definition of XBUS related |
| 952 | FIR settings \* |
| 953 | `4923ac750fb9 <https://github.com/open-power/hostboot/commit/4923ac750fb9>`__ |
| 954 | p9\_setup\_bars -- precisely configure MCD available group vector \* |
| 955 | `c9a86977d3eb <https://github.com/open-power/hostboot/commit/c9a86977d3eb>`__ |
| 956 | shift XBUS FIR programming inits for secure boot \* |
| 957 | `1d70cbbeba50 <https://github.com/open-power/hostboot/commit/1d70cbbeba50>`__ |
| 958 | cresp address error handling updates \* |
| 959 | `c2816fc79f84 <https://github.com/open-power/hostboot/commit/c2816fc79f84>`__ |
| 960 | update OBUS PLL buckets for p9n dd22, p9c dd11 \* |
| 961 | `aeec96752c1a <https://github.com/open-power/hostboot/commit/aeec96752c1a>`__ |
| 962 | Cumulus MSS FIR updates \* |
| 963 | `70ec114fdfd4 <https://github.com/open-power/hostboot/commit/70ec114fdfd4>`__ |
| 964 | p9\_build\_smp -- use ADU chipops to switch fabric configuration part #2 |
| 965 | \* |
| 966 | `f81091a35f5d <https://github.com/open-power/hostboot/commit/f81091a35f5d>`__ |
| 967 | enforce strict 512 GB per socket limit on Witherspoon memory map \* |
| 968 | `f28cb333bfe3 <https://github.com/open-power/hostboot/commit/f28cb333bfe3>`__ |
| 969 | p9.npu.scom.initfile -- limit DCP0 credits for HW437173 |
| 970 | |
| 971 | Joel Stanley (1): \* |
| 972 | `716a165455c1 <https://github.com/open-power/hostboot/commit/716a165455c1>`__ |
| 973 | fapi2: Fix template call sites for GCC 7 |
| 974 | |
| 975 | John Rell (2): \* |
| 976 | `72a3e1a7da9c <https://github.com/open-power/hostboot/commit/72a3e1a7da9c>`__ |
| 977 | jgr17121400 HW430958 Cumulus Xbus short channel \* |
| 978 | `c439c1399cb1 <https://github.com/open-power/hostboot/commit/c439c1399cb1>`__ |
| 979 | jgr171017 Setting changes for Obus boardwire vs cable |
| 980 | |
| 981 | Kahn Evans (1): \* |
| 982 | `0ef7c3c566af <https://github.com/open-power/hostboot/commit/0ef7c3c566af>`__ |
| 983 | Optional support to parse default attribute tags |
| 984 | |
| 985 | Lennard Streat (5): \* |
| 986 | `9554c4520e9e <https://github.com/open-power/hostboot/commit/9554c4520e9e>`__ |
| 987 | Updating MCU to support ALT\_M setting fix (HW425310). \* |
| 988 | `46b2641400bc <https://github.com/open-power/hostboot/commit/46b2641400bc>`__ |
| 989 | Adding in feature to run hardware force mirror facility by default. \* |
| 990 | `421bf8c4f4c5 <https://github.com/open-power/hostboot/commit/421bf8c4f4c5>`__ |
| 991 | Disable Read data delay for Cumulus DD1.0. \* |
| 992 | `ca9bfdb954db <https://github.com/open-power/hostboot/commit/ca9bfdb954db>`__ |
| 993 | Workaround for Warlike Parasite (HW430546) \* |
| 994 | `2839599b3373 <https://github.com/open-power/hostboot/commit/2839599b3373>`__ |
| 995 | Protect Firmware from exposure to HW423533 |
| 996 | |
| 997 | Louis Stermole (14): \* |
| 998 | `d7750b78d80c <https://github.com/open-power/hostboot/commit/d7750b78d80c>`__ |
| 999 | Fix tWLDQSEN and IPW\_WR\_WR timing parameters for MSS training \* |
| 1000 | `08cfd267e67e <https://github.com/open-power/hostboot/commit/08cfd267e67e>`__ |
| 1001 | Add Vreg==1 trigger to DLL workaround \* |
| 1002 | `929920660d1c <https://github.com/open-power/hostboot/commit/929920660d1c>`__ |
| 1003 | Fix default values for power/thermal MRW attributes in XML \* |
| 1004 | `efe0e19b37f5 <https://github.com/open-power/hostboot/commit/efe0e19b37f5>`__ |
| 1005 | Fix Galois codes for chip marks added by MSS restore\_repairs function |
| 1006 | \* |
| 1007 | `956df8db0fd1 <https://github.com/open-power/hostboot/commit/956df8db0fd1>`__ |
| 1008 | Change ZQ cal fail action to deconfigure MCBIST instead of MCA \* |
| 1009 | `fc1ce68719ee <https://github.com/open-power/hostboot/commit/fc1ce68719ee>`__ |
| 1010 | Enable exit\_1 mode in FWMS for symbol marks \* |
| 1011 | `789f5c5645a5 <https://github.com/open-power/hostboot/commit/789f5c5645a5>`__ |
| 1012 | Move MSS Rosetta map from lab to f/w library, add API \* |
| 1013 | `d55728f031ec <https://github.com/open-power/hostboot/commit/d55728f031ec>`__ |
| 1014 | Modify Rosetta map to reflect port corrections \* |
| 1015 | `8ce3ad72158b <https://github.com/open-power/hostboot/commit/8ce3ad72158b>`__ |
| 1016 | Rename access\_delay\_regs API perspective MC to C4 and add real MC |
| 1017 | perspective \* |
| 1018 | `e75b51ba9604 <https://github.com/open-power/hostboot/commit/e75b51ba9604>`__ |
| 1019 | Return failing MCA targets when MSS\_CALC\_PORT\_POWER\_EXCEEDS\_MAX |
| 1020 | condition hit \* |
| 1021 | `3ef5e1a8f163 <https://github.com/open-power/hostboot/commit/3ef5e1a8f163>`__ |
| 1022 | Add API for MC to C4 DQ pin index translation \* |
| 1023 | `e33d4b68cfd9 <https://github.com/open-power/hostboot/commit/e33d4b68cfd9>`__ |
| 1024 | Add better trace to MSS restore DRAM repairs function and add lab |
| 1025 | wrapper \* |
| 1026 | `1d565299ec31 <https://github.com/open-power/hostboot/commit/1d565299ec31>`__ |
| 1027 | Add plug rule for dual-drop DIMM configs that produce different xlate |
| 1028 | settings \* |
| 1029 | `03de84e713fb <https://github.com/open-power/hostboot/commit/03de84e713fb>`__ |
| 1030 | Add empty MSS freq\_workarounds.C/H for hostboot |
| 1031 | |
| 1032 | Luke C. Murray (4): \* |
| 1033 | `094a91b3f779 <https://github.com/open-power/hostboot/commit/094a91b3f779>`__ |
| 1034 | Turning on NCU tlbie pacing by default \* |
| 1035 | `fabc7bd25190 <https://github.com/open-power/hostboot/commit/fabc7bd25190>`__ |
| 1036 | Adding attribute to turn memory early data on \* |
| 1037 | `5fa8f9e036df <https://github.com/open-power/hostboot/commit/5fa8f9e036df>`__ |
| 1038 | Enabling L2 64B store prediction \* |
| 1039 | `33db30729056 <https://github.com/open-power/hostboot/commit/33db30729056>`__ |
| 1040 | Updating Cumulus early memory data dials |
| 1041 | |
| 1042 | Luke Mulkey (5): \* |
| 1043 | `a498dc4e94fb <https://github.com/open-power/hostboot/commit/a498dc4e94fb>`__ |
| 1044 | Zeppelin Plug Rule Fix \* |
| 1045 | `7bbec657da0b <https://github.com/open-power/hostboot/commit/7bbec657da0b>`__ |
| 1046 | MRW attribute changes \* |
| 1047 | `f230133c8502 <https://github.com/open-power/hostboot/commit/f230133c8502>`__ |
| 1048 | Lab tools for p9c. \* |
| 1049 | `e4c43f303408 <https://github.com/open-power/hostboot/commit/e4c43f303408>`__ |
| 1050 | Fix mss\_freq bug \* |
| 1051 | `14ae2496088d <https://github.com/open-power/hostboot/commit/14ae2496088d>`__ |
| 1052 | Add ddr4 mnfg info to attributes during spd collection |
| 1053 | |
| 1054 | Marty Gloff (4): \* |
| 1055 | `fe58a710b97e <https://github.com/open-power/hostboot/commit/fe58a710b97e>`__ |
| 1056 | Parser for SBE and HCODE build level \* |
| 1057 | `ca52f95d63bd <https://github.com/open-power/hostboot/commit/ca52f95d63bd>`__ |
| 1058 | Concurrent code update of HBRT - Read Version \* |
| 1059 | `0a1b60c34e55 <https://github.com/open-power/hostboot/commit/0a1b60c34e55>`__ |
| 1060 | Concurrent code update of HBRT - Update Structure \* |
| 1061 | `6c769aede363 <https://github.com/open-power/hostboot/commit/6c769aede363>`__ |
| 1062 | Concurrent code update of HBRT - Enable Interface for Host |
| 1063 | |
| 1064 | Matt Derksen (18): \* |
| 1065 | `2b4e2315094e <https://github.com/open-power/hostboot/commit/2b4e2315094e>`__ |
| 1066 | Send down OCC info logs to BMC for call-home \* |
| 1067 | `3378748dbc2e <https://github.com/open-power/hostboot/commit/3378748dbc2e>`__ |
| 1068 | Fix some review comments for sending down OCC info logs to BMC \* |
| 1069 | `dacd80a9811f <https://github.com/open-power/hostboot/commit/dacd80a9811f>`__ |
| 1070 | Fix grabbing config from NV keyword data \* |
| 1071 | `89f7297255af <https://github.com/open-power/hostboot/commit/89f7297255af>`__ |
| 1072 | Test and verify concurrent init of PM complex \* |
| 1073 | `2d590161d70f <https://github.com/open-power/hostboot/commit/2d590161d70f>`__ |
| 1074 | Enable ZZ-2U \* |
| 1075 | `2429064ef8ce <https://github.com/open-power/hostboot/commit/2429064ef8ce>`__ |
| 1076 | Move major stack variable to heap to avoid stack overrun \* |
| 1077 | `5161b6eb9b76 <https://github.com/open-power/hostboot/commit/5161b6eb9b76>`__ |
| 1078 | Increase trace buffer size to avoid hang between traces and PRD. \* |
| 1079 | `6141805efc9c <https://github.com/open-power/hostboot/commit/6141805efc9c>`__ |
| 1080 | Add HB\_VOLATILE sensor so OpenBMC can mark volatile sections \* |
| 1081 | `d2b876356f54 <https://github.com/open-power/hostboot/commit/d2b876356f54>`__ |
| 1082 | Lock i2c around vpd write message to FSP at runtime \* |
| 1083 | `722bf1861db9 <https://github.com/open-power/hostboot/commit/722bf1861db9>`__ |
| 1084 | Fix setting hbVolatile and RebootControl sensors \* |
| 1085 | `44aa1a1578b1 <https://github.com/open-power/hostboot/commit/44aa1a1578b1>`__ |
| 1086 | Compile attributeOverride tool in x86.nfp environment for mnfg use \* |
| 1087 | `f6f8c953755a <https://github.com/open-power/hostboot/commit/f6f8c953755a>`__ |
| 1088 | EKB side of changes for attributeOverride tool in x86.nfp context \* |
| 1089 | `f0c1f3b3a422 <https://github.com/open-power/hostboot/commit/f0c1f3b3a422>`__ |
| 1090 | Explicitly call ATTN/PRD before exiting PM Reset flow \* |
| 1091 | `27cbbc4cc87d <https://github.com/open-power/hostboot/commit/27cbbc4cc87d>`__ |
| 1092 | Update int64\_t attributes in attributeenums.H to LL \* |
| 1093 | `d5bdfe28f46f <https://github.com/open-power/hostboot/commit/d5bdfe28f46f>`__ |
| 1094 | Initialize SBE message communication on HBRT start \* |
| 1095 | `de8120523a0c <https://github.com/open-power/hostboot/commit/de8120523a0c>`__ |
| 1096 | Only access HB\_VOLATILE on non-FSP systems \* |
| 1097 | `27bddb0e962f <https://github.com/open-power/hostboot/commit/27bddb0e962f>`__ |
| 1098 | Update attributes based on message from the FSP \* |
| 1099 | `b6f70467b720 <https://github.com/open-power/hostboot/commit/b6f70467b720>`__ |
| 1100 | Add duplibs.sh tool to our hostboot repo |
| 1101 | |
| 1102 | Matthew Hickman (2): \* |
| 1103 | `daa54a8d74e8 <https://github.com/open-power/hostboot/commit/daa54a8d74e8>`__ |
| 1104 | Fixed AUE/IAUE masking bug \* |
| 1105 | `1012aacb0a13 <https://github.com/open-power/hostboot/commit/1012aacb0a13>`__ |
| 1106 | Added workaround for broadcast mode UE noise window |
| 1107 | |
| 1108 | Michael Floyd (1): \* |
| 1109 | `a5f5a3baefa6 <https://github.com/open-power/hostboot/commit/a5f5a3baefa6>`__ |
| 1110 | CME Code Size Reduction ATTEMPT#3 |
| 1111 | |
| 1112 | Mike Baiocchi (19): \* |
| 1113 | `b0a9a93e45dd <https://github.com/open-power/hostboot/commit/b0a9a93e45dd>`__ |
| 1114 | Add Functionality To Allow FSP to Enable TCEs For Testing \* |
| 1115 | `8f6cf7d7310d <https://github.com/open-power/hostboot/commit/8f6cf7d7310d>`__ |
| 1116 | Add TCE Support to utillidmgr \* |
| 1117 | `8fcdfa14a7d3 <https://github.com/open-power/hostboot/commit/8fcdfa14a7d3>`__ |
| 1118 | Support Verifying and Moving PAYLOAD and HDAT when TCEs are Enabled \* |
| 1119 | `5cd503229820 <https://github.com/open-power/hostboot/commit/5cd503229820>`__ |
| 1120 | Fix Initializing HW To Point At An Invalid TCE Table in Istep 10.6 \* |
| 1121 | `f43013e57725 <https://github.com/open-power/hostboot/commit/f43013e57725>`__ |
| 1122 | Send FSP relevant information for PSI Diagnotics test when TCEs are |
| 1123 | enabled \* |
| 1124 | `07f9a3771538 <https://github.com/open-power/hostboot/commit/07f9a3771538>`__ |
| 1125 | TCE Updates to support OPAL \* |
| 1126 | `b27a71f308e1 <https://github.com/open-power/hostboot/commit/b27a71f308e1>`__ |
| 1127 | Update TPM Retry Policy and Timings \* |
| 1128 | `e93cf4eb7e3e <https://github.com/open-power/hostboot/commit/e93cf4eb7e3e>`__ |
| 1129 | Enable TCEs as the default on FSP-based systems \* |
| 1130 | `079068a0dd84 <https://github.com/open-power/hostboot/commit/079068a0dd84>`__ |
| 1131 | I2C Reset Path: Add Poll of SCL High Before Issuing Stop Command \* |
| 1132 | `8632294639a9 <https://github.com/open-power/hostboot/commit/8632294639a9>`__ |
| 1133 | Secure Boot: Skip OPAL Verification \* |
| 1134 | `4046ab053d85 <https://github.com/open-power/hostboot/commit/4046ab053d85>`__ |
| 1135 | On MPIPLs open up TCE windows for FSP to extract dump information \* |
| 1136 | `1d437c8dc548 <https://github.com/open-power/hostboot/commit/1d437c8dc548>`__ |
| 1137 | Verify ComponentID and Extend PAYLOAD \* |
| 1138 | `3143da8a19df <https://github.com/open-power/hostboot/commit/3143da8a19df>`__ |
| 1139 | Do Not Unload libruntime.so on MPIPLs \* |
| 1140 | `b1d0900ad706 <https://github.com/open-power/hostboot/commit/b1d0900ad706>`__ |
| 1141 | Find location of HDAT relocation dynamically from PAYLOAD \* |
| 1142 | `4f3656309da6 <https://github.com/open-power/hostboot/commit/4f3656309da6>`__ |
| 1143 | Remove Attribute Check For TCE Settings \* |
| 1144 | `0bfdbce84ec9 <https://github.com/open-power/hostboot/commit/0bfdbce84ec9>`__ |
| 1145 | Update utilDeallocateTces and other TCE Cleanup \* |
| 1146 | `31b01f231f1c <https://github.com/open-power/hostboot/commit/31b01f231f1c>`__ |
| 1147 | Add TCE-related attributes to the Node target \* |
| 1148 | `2d6ba11ae2fc <https://github.com/open-power/hostboot/commit/2d6ba11ae2fc>`__ |
| 1149 | Add checks to PnorUtils.pm to look for errors in layout files \* |
| 1150 | `c93bef31ae6c <https://github.com/open-power/hostboot/commit/c93bef31ae6c>`__ |
| 1151 | Update TCE Testcases |
| 1152 | |
| 1153 | Nicholas E. Bofferding (1): \* |
| 1154 | `e770e96a5d67 <https://github.com/open-power/hostboot/commit/e770e96a5d67>`__ |
| 1155 | Revert "Remove Attribute Check For TCE Settings" |
| 1156 | |
| 1157 | Nick Bofferding (18): \* |
| 1158 | `b0f4906b589d <https://github.com/open-power/hostboot/commit/b0f4906b589d>`__ |
| 1159 | Secure Boot: Sign MEMD partition for FSP platforms \* |
| 1160 | `07d75753d594 <https://github.com/open-power/hostboot/commit/07d75753d594>`__ |
| 1161 | Secure Boot: Enforce PNOR section component IDs \* |
| 1162 | `70c697000c8a <https://github.com/open-power/hostboot/commit/70c697000c8a>`__ |
| 1163 | Secure Boot: Fix parallel and multiple pass image signing issues \* |
| 1164 | `f7dd1f12d858 <https://github.com/open-power/hostboot/commit/f7dd1f12d858>`__ |
| 1165 | Secure Boot: Purge dev SW signing cache before reuse \* |
| 1166 | `9470c51fc486 <https://github.com/open-power/hostboot/commit/9470c51fc486>`__ |
| 1167 | Secure Boot: Support FSP/HB standalone production signing \* |
| 1168 | `2fc740c30b90 <https://github.com/open-power/hostboot/commit/2fc740c30b90>`__ |
| 1169 | Secure Boot: Enable PSI interrupts after XSCOM switchover \* |
| 1170 | `98e555428942 <https://github.com/open-power/hostboot/commit/98e555428942>`__ |
| 1171 | Secure Boot: Blacklist: Init PSI bridge BAR and FSP BAR properly for |
| 1172 | security \* |
| 1173 | `3e24de691ed6 <https://github.com/open-power/hostboot/commit/3e24de691ed6>`__ |
| 1174 | Secure Boot: Surface unique TI when key transitioning complete \* |
| 1175 | `00d2200112da <https://github.com/open-power/hostboot/commit/00d2200112da>`__ |
| 1176 | Secure Boot; Force simultaneous SBE update on key transition \* |
| 1177 | `bd1519429ab3 <https://github.com/open-power/hostboot/commit/bd1519429ab3>`__ |
| 1178 | Secure Boot: RAS Reviews: Fix load handler logging \* |
| 1179 | `7a5fdcbd0c45 <https://github.com/open-power/hostboot/commit/7a5fdcbd0c45>`__ |
| 1180 | Secure Boot: Remove cyclic dependency in TPM daemon shutdown path \* |
| 1181 | `d52d893e3aa2 <https://github.com/open-power/hostboot/commit/d52d893e3aa2>`__ |
| 1182 | Secure Boot: Flag ROM verify reason code as terminating RC \* |
| 1183 | `eb22cf5b7cb7 <https://github.com/open-power/hostboot/commit/eb22cf5b7cb7>`__ |
| 1184 | Secure Boot: Open persistent virtual memory mapping for HDAT TPM logs \* |
| 1185 | `24d964b78e02 <https://github.com/open-power/hostboot/commit/24d964b78e02>`__ |
| 1186 | Fix syntax error in Dump.pm \* |
| 1187 | `d18433a85fa8 <https://github.com/open-power/hostboot/commit/d18433a85fa8>`__ |
| 1188 | Secure Boot: Open up Hostboot VMM untrusted RO window on non-master |
| 1189 | procs \* |
| 1190 | `1fe8dc520583 <https://github.com/open-power/hostboot/commit/1fe8dc520583>`__ |
| 1191 | Secure Boot: Remove utilmem from verify container fail path \* |
| 1192 | `b5fedb0fcbc0 <https://github.com/open-power/hostboot/commit/b5fedb0fcbc0>`__ |
| 1193 | Secure Boot: Adapt workbooks' TPM target to Hostboot's \* |
| 1194 | `28927a78ca41 <https://github.com/open-power/hostboot/commit/28927a78ca41>`__ |
| 1195 | Fix syntax error in Dump.pm |
| 1196 | |
| 1197 | Nick Klazynski (10): \* |
| 1198 | `cf1f011b5af9 <https://github.com/open-power/hostboot/commit/cf1f011b5af9>`__ |
| 1199 | Add HW425526 and HW425027 \* |
| 1200 | `c4139797e45b <https://github.com/open-power/hostboot/commit/c4139797e45b>`__ |
| 1201 | HW403465 applies to all chips; Revert NDD2.1 RL; add SW406970 \* |
| 1202 | `1ed63da3a55c <https://github.com/open-power/hostboot/commit/1ed63da3a55c>`__ |
| 1203 | Nimbus DD2.2 core chickenswitches \* |
| 1204 | `fcf7d0e3f5fe <https://github.com/open-power/hostboot/commit/fcf7d0e3f5fe>`__ |
| 1205 | Large update for security \* |
| 1206 | `a9040e3c67fd <https://github.com/open-power/hostboot/commit/a9040e3c67fd>`__ |
| 1207 | Fix three NDD2.1 dials and add new NDD2.2 workarounds \* |
| 1208 | `6b21ff6c1caf <https://github.com/open-power/hostboot/commit/6b21ff6c1caf>`__ |
| 1209 | Add new TM IMC, Add TLBIE hangbuster \* |
| 1210 | `bf86a41a8e0e <https://github.com/open-power/hostboot/commit/bf86a41a8e0e>`__ |
| 1211 | Implement security IMCs, based on v29 of wiki \* |
| 1212 | `74a1024eb8c1 <https://github.com/open-power/hostboot/commit/74a1024eb8c1>`__ |
| 1213 | Two LTPTR workarounds, remove LTPTR serialization, Fix TB IMC \* |
| 1214 | `1c8193dd9e82 <https://github.com/open-power/hostboot/commit/1c8193dd9e82>`__ |
| 1215 | Enable mixed core xlate; Enable xlate protection feature; Disable LSU |
| 1216 | clockgate \* |
| 1217 | `80fa020e3ea7 <https://github.com/open-power/hostboot/commit/80fa020e3ea7>`__ |
| 1218 | Add TM WAT workaround; NDD2.2 and CDD1.1 only |
| 1219 | |
| 1220 | Prachi Gupta (14): \* |
| 1221 | `18cc0dfbc93f <https://github.com/open-power/hostboot/commit/18cc0dfbc93f>`__ |
| 1222 | Zeppelin BUP updates \* |
| 1223 | `5b3da20db0e8 <https://github.com/open-power/hostboot/commit/5b3da20db0e8>`__ |
| 1224 | Zeppelin BUP updates: Targets.pm changes \* |
| 1225 | `a420f6c23b46 <https://github.com/open-power/hostboot/commit/a420f6c23b46>`__ |
| 1226 | Zeppelin BUP updates: mss\_memdiags workaround \* |
| 1227 | `e4d01510117e <https://github.com/open-power/hostboot/commit/e4d01510117e>`__ |
| 1228 | Zeppelin BUP: istep 14 fixes \* |
| 1229 | `50a901b1468a <https://github.com/open-power/hostboot/commit/50a901b1468a>`__ |
| 1230 | ZEPPELIN BUP: fix VPD\_REC\_NUM for membuf target \* |
| 1231 | `3807622a5fae <https://github.com/open-power/hostboot/commit/3807622a5fae>`__ |
| 1232 | ZEPPELIN BUP: host enable memvolt changes \* |
| 1233 | `94d8abaa56c0 <https://github.com/open-power/hostboot/commit/94d8abaa56c0>`__ |
| 1234 | Added values for CVPD\_SIZE and CVPD\_MAX\_SECTIONS in processMrw \* |
| 1235 | `51d3eeea8b3a <https://github.com/open-power/hostboot/commit/51d3eeea8b3a>`__ |
| 1236 | set ATTR\_PROC\_SBE\_MASTER\_CHIP based on LPC connections in MRW \* |
| 1237 | `9ea9546db73d <https://github.com/open-power/hostboot/commit/9ea9546db73d>`__ |
| 1238 | ZEP\_BUP: remove no\_export and default value from |
| 1239 | DMI\_REFCLOCK\_SWIZZLE \* |
| 1240 | `bb004ba55073 <https://github.com/open-power/hostboot/commit/bb004ba55073>`__ |
| 1241 | processMrw: hard-code all base bar addresses as to not rely on mrw \* |
| 1242 | `07c9730e0a3f <https://github.com/open-power/hostboot/commit/07c9730e0a3f>`__ |
| 1243 | CEN\_MSS\_CACHE\_ENABLE: default to 1 \* |
| 1244 | `77224965fc6c <https://github.com/open-power/hostboot/commit/77224965fc6c>`__ |
| 1245 | processMrw: multinode updates \* |
| 1246 | `abc7d754b770 <https://github.com/open-power/hostboot/commit/abc7d754b770>`__ |
| 1247 | host\_coalesce\_host: bup updates \* |
| 1248 | `0e0dc100a1ad <https://github.com/open-power/hostboot/commit/0e0dc100a1ad>`__ |
| 1249 | LINK\_TRAIN: HWSV needs to write this attr, so, marking it as writable |
| 1250 | |
| 1251 | Prasad Bg Ranganath (11): \* |
| 1252 | `c0d7d47a554f <https://github.com/open-power/hostboot/commit/c0d7d47a554f>`__ |
| 1253 | PM: Fix QCSR and CCSR update \* |
| 1254 | `79acd9f3a834 <https://github.com/open-power/hostboot/commit/79acd9f3a834>`__ |
| 1255 | P9\_pstate\_parameter\_block: Bug fix in IAC VDN calculation \* |
| 1256 | `5b86ae89fcd9 <https://github.com/open-power/hostboot/commit/5b86ae89fcd9>`__ |
| 1257 | Fix bug in cache query state procedure \* |
| 1258 | `1c06b1a80e5e <https://github.com/open-power/hostboot/commit/1c06b1a80e5e>`__ |
| 1259 | p9\_setup\_evid: Missed applying bias values for pound V \* |
| 1260 | `4319e2a93d9a <https://github.com/open-power/hostboot/commit/4319e2a93d9a>`__ |
| 1261 | p9\_pm\_pstate\_gpe\_init: setup Fsafe in all configured QPPMs \* |
| 1262 | `ed38dac64269 <https://github.com/open-power/hostboot/commit/ed38dac64269>`__ |
| 1263 | p9\_pstate\_parameter\_block: support removal of VFRT Vdn \* |
| 1264 | `755b47ecad12 <https://github.com/open-power/hostboot/commit/755b47ecad12>`__ |
| 1265 | PPPB: Fix endianess in pstate\_parameter\_block.C \* |
| 1266 | `93c73a3eac40 <https://github.com/open-power/hostboot/commit/93c73a3eac40>`__ |
| 1267 | Proc VPD:POUND W Version 3-F support \* |
| 1268 | `c77b6c1a8839 <https://github.com/open-power/hostboot/commit/c77b6c1a8839>`__ |
| 1269 | p9\_pm\_reset: check safe mode and, if not, move to Psafe manually \* |
| 1270 | `b0f4bd1e57b5 <https://github.com/open-power/hostboot/commit/b0f4bd1e57b5>`__ |
| 1271 | Zepplin:Remove dd level check for cumulus under PPB code \* |
| 1272 | `13b0dd897296 <https://github.com/open-power/hostboot/commit/13b0dd897296>`__ |
| 1273 | FW910: PM reset procedure fix, move psafe update after CME halts |
| 1274 | |
| 1275 | Prem Shanker Jha (11): \* |
| 1276 | `47c3bbe42264 <https://github.com/open-power/hostboot/commit/47c3bbe42264>`__ |
| 1277 | PM: Added support for version control in SCOM restore entries. \* |
| 1278 | `04846f139458 <https://github.com/open-power/hostboot/commit/04846f139458>`__ |
| 1279 | EQ SCOM Restore: Introduced version control in SCOM restore entry. \* |
| 1280 | `000deef452bc <https://github.com/open-power/hostboot/commit/000deef452bc>`__ |
| 1281 | PM: Fixed generation of MTSPR instruction in STOP API. \* |
| 1282 | `45824ede1fc0 <https://github.com/open-power/hostboot/commit/45824ede1fc0>`__ |
| 1283 | STOP Recovery: Only XIR collection in HWP error path during PM Reset. \* |
| 1284 | `537e7b6e6c72 <https://github.com/open-power/hostboot/commit/537e7b6e6c72>`__ |
| 1285 | Hcode Injection: Adds hcode error injection capability. \* |
| 1286 | `993eec11fc9f <https://github.com/open-power/hostboot/commit/993eec11fc9f>`__ |
| 1287 | SCOM Restore: Increased the EQ SCOM restore limit. \* |
| 1288 | `6897c9475c92 <https://github.com/open-power/hostboot/commit/6897c9475c92>`__ |
| 1289 | Idle Stop State: Adds CME and SGPE global variables to FFDC. \* |
| 1290 | `3b71fb0a04e3 <https://github.com/open-power/hostboot/commit/3b71fb0a04e3>`__ |
| 1291 | PM: Level-1 implementation for HWP p9\_pm\_callout. \* |
| 1292 | `8c89a1b7b92d <https://github.com/open-power/hostboot/commit/8c89a1b7b92d>`__ |
| 1293 | PM : Changed FFDC collection to XIR mode. \* |
| 1294 | `c9c74dbf7f02 <https://github.com/open-power/hostboot/commit/c9c74dbf7f02>`__ |
| 1295 | PM: Workaround to mirror error xml file of p9\_pm\_callout in HB. \* |
| 1296 | `b74acc4c3a24 <https://github.com/open-power/hostboot/commit/b74acc4c3a24>`__ |
| 1297 | PM: Generation of summarized version of STOP Recovery FFDC. |
| 1298 | |
| 1299 | Rahul Batra (4): \* |
| 1300 | `4924945481bd <https://github.com/open-power/hostboot/commit/4924945481bd>`__ |
| 1301 | PGPE: STOP11+WOF+SafeMode Fixes \* |
| 1302 | `443f2c73ac82 <https://github.com/open-power/hostboot/commit/443f2c73ac82>`__ |
| 1303 | PGPE: Fix FIT and actuation step conflict \* |
| 1304 | `3742bc2463d0 <https://github.com/open-power/hostboot/commit/3742bc2463d0>`__ |
| 1305 | PM: VDM Prolonged Droop Fix \* |
| 1306 | `fb663d7186c1 <https://github.com/open-power/hostboot/commit/fb663d7186c1>`__ |
| 1307 | PSTATE: Remove Already ON/OFF PGPE-OCC IPC Error RC |
| 1308 | |
| 1309 | Raja Das (1): \* |
| 1310 | `60ccd2d1e787 <https://github.com/open-power/hostboot/commit/60ccd2d1e787>`__ |
| 1311 | Differentiated Control Node type field from Normal Node |
| 1312 | |
| 1313 | Ricardo Mata (1): \* |
| 1314 | `17ce7befe588 <https://github.com/open-power/hostboot/commit/17ce7befe588>`__ |
| 1315 | Added CI throttling support, HW init updates, and fixed a bug with tce |
| 1316 | arb. |
| 1317 | |
| 1318 | Richard J. Knight (7): \* |
| 1319 | `1100f64331cb <https://github.com/open-power/hostboot/commit/1100f64331cb>`__ |
| 1320 | Add script to edit hostboot binary images to enable CFM testing \* |
| 1321 | `c2c5d0e657f6 <https://github.com/open-power/hostboot/commit/c2c5d0e657f6>`__ |
| 1322 | p9\_xip\_tool support for DD level section parsing \* |
| 1323 | `911996a1c31f <https://github.com/open-power/hostboot/commit/911996a1c31f>`__ |
| 1324 | Add new pnor section for Centaur hw ref image \* |
| 1325 | `7f860e8a5c47 <https://github.com/open-power/hostboot/commit/7f860e8a5c47>`__ |
| 1326 | BUP - istep 11 support phase 1 \* |
| 1327 | `b87820bf1bcc <https://github.com/open-power/hostboot/commit/b87820bf1bcc>`__ |
| 1328 | Invalid FFDC in error log \* |
| 1329 | `fd27bc6d28c5 <https://github.com/open-power/hostboot/commit/fd27bc6d28c5>`__ |
| 1330 | Enable multi-drawer hdat construction \* |
| 1331 | `688f82f4a276 <https://github.com/open-power/hostboot/commit/688f82f4a276>`__ |
| 1332 | Eliminate duplicate entries in hdat hb reserved mem section |
| 1333 | |
| 1334 | Rick Ward (1): \* |
| 1335 | `ebe0b5de67d7 <https://github.com/open-power/hostboot/commit/ebe0b5de67d7>`__ |
| 1336 | Send additional FSP progress messages during long isteps (e.g. memdiags) |
| 1337 | |
| 1338 | Robert Lippert (6): \* |
| 1339 | `fb8c2671f28d <https://github.com/open-power/hostboot/commit/fb8c2671f28d>`__ |
| 1340 | errldisplay: use table-driven display for HWPF error strings \* |
| 1341 | `20b179f938d4 <https://github.com/open-power/hostboot/commit/20b179f938d4>`__ |
| 1342 | hwas: skip reading ID/EC data from BMC \* |
| 1343 | `69b2391ad885 <https://github.com/open-power/hostboot/commit/69b2391ad885>`__ |
| 1344 | ipmi: add support for reading SEL time from BMC \* |
| 1345 | `013f189c0215 <https://github.com/open-power/hostboot/commit/013f189c0215>`__ |
| 1346 | vpd: add ability to read record RT keyword value \* |
| 1347 | `7261c1709400 <https://github.com/open-power/hostboot/commit/7261c1709400>`__ |
| 1348 | vpd/mvpd: add RT as a valid MVPD keyword enum \* |
| 1349 | `f7b6ad2045f4 <https://github.com/open-power/hostboot/commit/f7b6ad2045f4>`__ |
| 1350 | hdat: use VRML record for processor PCRD VPD data |
| 1351 | |
| 1352 | Roland Veloz (7): \* |
| 1353 | `8e6bd68539af <https://github.com/open-power/hostboot/commit/8e6bd68539af>`__ |
| 1354 | Updated the GenericFspMboxMessage\_t struct \* |
| 1355 | `f0db3bed8334 <https://github.com/open-power/hostboot/commit/f0db3bed8334>`__ |
| 1356 | Handle SBE Error and Attempt Recovery from FSP \* |
| 1357 | `a69cb64611f3 <https://github.com/open-power/hostboot/commit/a69cb64611f3>`__ |
| 1358 | Adding support for TOD RAS on FSP systems \* |
| 1359 | `44d0f070400a <https://github.com/open-power/hostboot/commit/44d0f070400a>`__ |
| 1360 | Handles FSP reset-reload in HBRT messages \* |
| 1361 | `dfb142acec43 <https://github.com/open-power/hostboot/commit/dfb142acec43>`__ |
| 1362 | Corrected issue with hb errlparser not exiting on error \* |
| 1363 | `6f4abd1ea46f <https://github.com/open-power/hostboot/commit/6f4abd1ea46f>`__ |
| 1364 | Support for any target deconfig at runtime; Utility to create a generic |
| 1365 | message \* |
| 1366 | `4c76eec6354b <https://github.com/open-power/hostboot/commit/4c76eec6354b>`__ |
| 1367 | Propagate PLID from caller to any new errors; GARD target on retry fails |
| 1368 | |
| 1369 | Ryan Black (2): \* |
| 1370 | `d5ca0693761a <https://github.com/open-power/hostboot/commit/d5ca0693761a>`__ |
| 1371 | p9.npu.scom.initfile -- fix cq\_sm allocation issue at low water mark \* |
| 1372 | `8c55990c047b <https://github.com/open-power/hostboot/commit/8c55990c047b>`__ |
| 1373 | set npu fir 0, bit 46 to masked, set npu fir 1, bits 1,3,5,7,9,11 to |
| 1374 | masked |
| 1375 | |
| 1376 | Sachin Gupta (5): \* |
| 1377 | `4f01142263eb <https://github.com/open-power/hostboot/commit/4f01142263eb>`__ |
| 1378 | Remove extra include dependency \* |
| 1379 | `4da087dd8293 <https://github.com/open-power/hostboot/commit/4da087dd8293>`__ |
| 1380 | Revert "p9\_sbe\_npll\_setup: Enable Spread Spectrum right after SS PLL |
| 1381 | lock" \* |
| 1382 | `610996cd1656 <https://github.com/open-power/hostboot/commit/610996cd1656>`__ |
| 1383 | Change type for number of pages. \* |
| 1384 | `4db7aa5d3c6b <https://github.com/open-power/hostboot/commit/4db7aa5d3c6b>`__ |
| 1385 | Remove workaround for DD1 SW reset for XIVE \* |
| 1386 | `77012419bdbc <https://github.com/open-power/hostboot/commit/77012419bdbc>`__ |
| 1387 | Revert "p9\_sbe\_npll\_setup: Enable Spread Spectrum right after SS PLL |
| 1388 | lock"" |
| 1389 | |
| 1390 | Sakethan R Kotta (1): \* |
| 1391 | `1f187d7b7b44 <https://github.com/open-power/hostboot/commit/1f187d7b7b44>`__ |
| 1392 | ORDINAL\_ID generation is fixed for multi node systems |
| 1393 | |
| 1394 | Sameer Veer (1): \* |
| 1395 | `dddd42af796f <https://github.com/open-power/hostboot/commit/dddd42af796f>`__ |
| 1396 | Changes to build-script & setup-env for nimbus & cumulus to co-exist |
| 1397 | |
| 1398 | Sampa Misra (1): \* |
| 1399 | `f10319641ba1 <https://github.com/open-power/hostboot/commit/f10319641ba1>`__ |
| 1400 | feature flag changes |
| 1401 | |
| 1402 | Santosh Puranik (6): \* |
| 1403 | `5357999d189c <https://github.com/open-power/hostboot/commit/5357999d189c>`__ |
| 1404 | Find connections by destination \* |
| 1405 | `12b6b45da232 <https://github.com/open-power/hostboot/commit/12b6b45da232>`__ |
| 1406 | Make plat init attributes non-writable \* |
| 1407 | `94404b004adb <https://github.com/open-power/hostboot/commit/94404b004adb>`__ |
| 1408 | Set FSI\_PORT for FSI slaves \* |
| 1409 | `aa0883bae4fa <https://github.com/open-power/hostboot/commit/aa0883bae4fa>`__ |
| 1410 | Fix PEER\_HUID attrib for XBUS and ABUS targets \* |
| 1411 | `3dca5a867512 <https://github.com/open-power/hostboot/commit/3dca5a867512>`__ |
| 1412 | Remove writeable tag from ATTR\_PROC\_FABRIC\_GROUP\_ID \* |
| 1413 | `b61115da3278 <https://github.com/open-power/hostboot/commit/b61115da3278>`__ |
| 1414 | Fix HUID generation on SMPGROUP targets |
| 1415 | |
| 1416 | Sheldon Bailey (3): \* |
| 1417 | `47a4947613f8 <https://github.com/open-power/hostboot/commit/47a4947613f8>`__ |
| 1418 | HTMGT:OP910:No change in processor speed turbo or non-turbo Witherspoon |
| 1419 | \* |
| 1420 | `276c45cf2da6 <https://github.com/open-power/hostboot/commit/276c45cf2da6>`__ |
| 1421 | HTMGT: Send VRM Vdd Thermal Thresholds to OCC part1 HB attributes \* |
| 1422 | `4809fbff915f <https://github.com/open-power/hostboot/commit/4809fbff915f>`__ |
| 1423 | HTMGT: Updates for reporting throttle below nominal on Boston |
| 1424 | |
| 1425 | Shelton Leung (2): \* |
| 1426 | `4f504a2eebea <https://github.com/open-power/hostboot/commit/4f504a2eebea>`__ |
| 1427 | fix for incorrect init value of AMO\_Limit\_Select \* |
| 1428 | `606a6f48b15c <https://github.com/open-power/hostboot/commit/606a6f48b15c>`__ |
| 1429 | fix for clockgate preventing perfmon start/stop |
| 1430 | |
| 1431 | Soma BhanuTej (3): \* |
| 1432 | `d50dc3d2216a <https://github.com/open-power/hostboot/commit/d50dc3d2216a>`__ |
| 1433 | Extract error info from PIBMEM array save-off \* |
| 1434 | `c2e705569f7f <https://github.com/open-power/hostboot/commit/c2e705569f7f>`__ |
| 1435 | Make SBE errors recoverable - p9\_sbe\_common \* |
| 1436 | `a59d4f7d2f4e <https://github.com/open-power/hostboot/commit/a59d4f7d2f4e>`__ |
| 1437 | Mask TP LFIR for non PPE mode - p9\_sbe\_common |
| 1438 | |
| 1439 | Stephen Cprek (30): \* |
| 1440 | `6e7098eba2f9 <https://github.com/open-power/hostboot/commit/6e7098eba2f9>`__ |
| 1441 | Add trace to indicate verify was called on a section \* |
| 1442 | `6caab6132b05 <https://github.com/open-power/hostboot/commit/6caab6132b05>`__ |
| 1443 | Create Master Container Lid Manager and test parsing \* |
| 1444 | `141c67de2310 <https://github.com/open-power/hostboot/commit/141c67de2310>`__ |
| 1445 | Add Header to TESTRO PNOR section for testing Secure Lid transfer \* |
| 1446 | `89c19d7e3a5b <https://github.com/open-power/hostboot/commit/89c19d7e3a5b>`__ |
| 1447 | Process Components in Master Container Lid \* |
| 1448 | `76f627c78307 <https://github.com/open-power/hostboot/commit/76f627c78307>`__ |
| 1449 | Sign HBD pnor section in fips builds \* |
| 1450 | `94b12d2ea050 <https://github.com/open-power/hostboot/commit/94b12d2ea050>`__ |
| 1451 | Enable preverified lid loading from pnor and Master Container Lid \* |
| 1452 | `b1f4e911b9b7 <https://github.com/open-power/hostboot/commit/b1f4e911b9b7>`__ |
| 1453 | Collect PNOR trace on secure verification error \* |
| 1454 | `bf8e8d4deb19 <https://github.com/open-power/hostboot/commit/bf8e8d4deb19>`__ |
| 1455 | Fix RTC number in TODO and limit trace from MclMgr and PreVerifiedLidMgr |
| 1456 | \* |
| 1457 | `1f2edbc95b80 <https://github.com/open-power/hostboot/commit/1f2edbc95b80>`__ |
| 1458 | Prevent all Master Container Lid processing in OPAL mode \* |
| 1459 | `f4d54e9c85b3 <https://github.com/open-power/hostboot/commit/f4d54e9c85b3>`__ |
| 1460 | Fix standalone compile and simics when secureboot compiled out \* |
| 1461 | `63a026113332 <https://github.com/open-power/hostboot/commit/63a026113332>`__ |
| 1462 | Create runtime\_utils so both IPL and runtime can use common functions |
| 1463 | \* |
| 1464 | `81279c1d146d <https://github.com/open-power/hostboot/commit/81279c1d146d>`__ |
| 1465 | Secure Boot: Fix lid load from HB reserved memory issues at runtime \* |
| 1466 | `75f0cfee9e5d <https://github.com/open-power/hostboot/commit/75f0cfee9e5d>`__ |
| 1467 | Fix strncpy from padding past the actual max size \* |
| 1468 | `c336a7728319 <https://github.com/open-power/hostboot/commit/c336a7728319>`__ |
| 1469 | Handle comments from pre-verify and runtime lid loading commits \* |
| 1470 | `ca52131dad3d <https://github.com/open-power/hostboot/commit/ca52131dad3d>`__ |
| 1471 | Handle ContainerHeader asserts more nicely with error logs \* |
| 1472 | `5b5972e5580c <https://github.com/open-power/hostboot/commit/5b5972e5580c>`__ |
| 1473 | Create a Trusted boot trace component and collect trace on errors \* |
| 1474 | `0b408ad7a340 <https://github.com/open-power/hostboot/commit/0b408ad7a340>`__ |
| 1475 | Add multi node support for genPnorImages and add HBD Fleetwood files \* |
| 1476 | `a4dc66b8d1c6 <https://github.com/open-power/hostboot/commit/a4dc66b8d1c6>`__ |
| 1477 | Specify actual SecureRom size into HDAT for POWERVM \* |
| 1478 | `4888af6221d7 <https://github.com/open-power/hostboot/commit/4888af6221d7>`__ |
| 1479 | fix genPnor param MEMD which passed in an empty input filename \* |
| 1480 | `d527220c6ffe <https://github.com/open-power/hostboot/commit/d527220c6ffe>`__ |
| 1481 | Add component ID check for Master Container Lid Processing \* |
| 1482 | `82f341573515 <https://github.com/open-power/hostboot/commit/82f341573515>`__ |
| 1483 | Fix incorrect size for entries going into hb resv memory \* |
| 1484 | `526f5106cc17 <https://github.com/open-power/hostboot/commit/526f5106cc17>`__ |
| 1485 | Do not preverify RINGOVD section in POWERVM mode \* |
| 1486 | `92466e69168a <https://github.com/open-power/hostboot/commit/92466e69168a>`__ |
| 1487 | Modify how POWERVM is processed in the MCL manager \* |
| 1488 | `9ae6e9595f97 <https://github.com/open-power/hostboot/commit/9ae6e9595f97>`__ |
| 1489 | Remove Secure Boot workarounds \* |
| 1490 | `34dbdc49d0d1 <https://github.com/open-power/hostboot/commit/34dbdc49d0d1>`__ |
| 1491 | Convert asserts to error logs where it makes sense \* |
| 1492 | `329b81443b43 <https://github.com/open-power/hostboot/commit/329b81443b43>`__ |
| 1493 | Make the MemRegionMgr class target aware \* |
| 1494 | `26bbcd97d817 <https://github.com/open-power/hostboot/commit/26bbcd97d817>`__ |
| 1495 | Open Untrusted Communication for SP \* |
| 1496 | `038392cae8c5 <https://github.com/open-power/hostboot/commit/038392cae8c5>`__ |
| 1497 | Move closing all unsecure memory regions to 21.3 \* |
| 1498 | `bf9ac140940b <https://github.com/open-power/hostboot/commit/bf9ac140940b>`__ |
| 1499 | Unload preverified secure sections after moving to mainstore memory \* |
| 1500 | `8443a65a3599 <https://github.com/open-power/hostboot/commit/8443a65a3599>`__ |
| 1501 | Collect better FFDC on ROM verification errors |
| 1502 | |
| 1503 | Stephen Glancy (20): \* |
| 1504 | `d110f5634137 <https://github.com/open-power/hostboot/commit/d110f5634137>`__ |
| 1505 | Adds in broadcast support for memdiags \* |
| 1506 | `6b9bc4190d60 <https://github.com/open-power/hostboot/commit/6b9bc4190d60>`__ |
| 1507 | Updates memory plug rules \* |
| 1508 | `1cf8acef718a <https://github.com/open-power/hostboot/commit/1cf8acef718a>`__ |
| 1509 | Fixes broadcast mode memdiags crash \* |
| 1510 | `e2305fe4b76e <https://github.com/open-power/hostboot/commit/e2305fe4b76e>`__ |
| 1511 | Fixes number of DRAM constants \* |
| 1512 | `0f5f2625adad <https://github.com/open-power/hostboot/commit/0f5f2625adad>`__ |
| 1513 | Updates dramint training structure \* |
| 1514 | `5ef4ce5ebbcd <https://github.com/open-power/hostboot/commit/5ef4ce5ebbcd>`__ |
| 1515 | Fixes memdiags bad address check \* |
| 1516 | `f40bed180c16 <https://github.com/open-power/hostboot/commit/f40bed180c16>`__ |
| 1517 | Adds PDA support \* |
| 1518 | `623216605144 <https://github.com/open-power/hostboot/commit/623216605144>`__ |
| 1519 | Worksaround AWAN simulation failure \* |
| 1520 | `b17f5a628c59 <https://github.com/open-power/hostboot/commit/b17f5a628c59>`__ |
| 1521 | Adds access delay regs helper functions \* |
| 1522 | `db05487e27b5 <https://github.com/open-power/hostboot/commit/db05487e27b5>`__ |
| 1523 | Adds blank PDA files for HB \* |
| 1524 | `f57934997860 <https://github.com/open-power/hostboot/commit/f57934997860>`__ |
| 1525 | Adds in blank files for CCS workarounds \* |
| 1526 | `3440e65b32f2 <https://github.com/open-power/hostboot/commit/3440e65b32f2>`__ |
| 1527 | Adds PDA support \* |
| 1528 | `296cd5865b39 <https://github.com/open-power/hostboot/commit/296cd5865b39>`__ |
| 1529 | Adds lab PDA support \* |
| 1530 | `01c730dd4157 <https://github.com/open-power/hostboot/commit/01c730dd4157>`__ |
| 1531 | Updates WR VREF for characterization results \* |
| 1532 | `21407ef50121 <https://github.com/open-power/hostboot/commit/21407ef50121>`__ |
| 1533 | Fixes WR LVL terminations \* |
| 1534 | `6650adcec6ac <https://github.com/open-power/hostboot/commit/6650adcec6ac>`__ |
| 1535 | Updates training advanced and adds custom WR CTR \* |
| 1536 | `e369ee31b0c5 <https://github.com/open-power/hostboot/commit/e369ee31b0c5>`__ |
| 1537 | Updates custom RD CTR pattern \* |
| 1538 | `1c2de2d2a08c <https://github.com/open-power/hostboot/commit/1c2de2d2a08c>`__ |
| 1539 | Fixes HB compile error \* |
| 1540 | `548b7fd4484c <https://github.com/open-power/hostboot/commit/548b7fd4484c>`__ |
| 1541 | Updates error logging to log target with FIRs \* |
| 1542 | `9aee6dc5b82a <https://github.com/open-power/hostboot/commit/9aee6dc5b82a>`__ |
| 1543 | Adds plug rule for NVDIMM in specific DIMM slots |
| 1544 | |
| 1545 | Sumit Kumar (3): \* |
| 1546 | `f43da019dd69 <https://github.com/open-power/hostboot/commit/f43da019dd69>`__ |
| 1547 | Centaur ring support - ring\_apply and ring data \* |
| 1548 | `8c9fd900efb8 <https://github.com/open-power/hostboot/commit/8c9fd900efb8>`__ |
| 1549 | Erepair HWP p9\_io\_erepairAccessorHwpFuncs \* |
| 1550 | `9153608879d2 <https://github.com/open-power/hostboot/commit/9153608879d2>`__ |
| 1551 | Moving DD specific ring coord from TOR to XIP (step 1) |
| 1552 | |
| 1553 | Swathi Madhuri Bhattiprolu (4): \* |
| 1554 | `27fe0afaf8f1 <https://github.com/open-power/hostboot/commit/27fe0afaf8f1>`__ |
| 1555 | Fix issues with DMI target handling \* |
| 1556 | `0f94c2620c70 <https://github.com/open-power/hostboot/commit/0f94c2620c70>`__ |
| 1557 | Support CDIMM VPD \* |
| 1558 | `b801fd1a776f <https://github.com/open-power/hostboot/commit/b801fd1a776f>`__ |
| 1559 | Make FAPI\_POS unique on multi node system \* |
| 1560 | `d999ed144f94 <https://github.com/open-power/hostboot/commit/d999ed144f94>`__ |
| 1561 | Re-enable base multi-drawer ipl support |
| 1562 | |
| 1563 | Thi Tran (10): \* |
| 1564 | `bcef4f1931d8 <https://github.com/open-power/hostboot/commit/bcef4f1931d8>`__ |
| 1565 | L2 - p9\_build\_smp HWPs \* |
| 1566 | `bcc5a5535c2d <https://github.com/open-power/hostboot/commit/bcc5a5535c2d>`__ |
| 1567 | Fix TODOs in p9\_build\_smp HWP \* |
| 1568 | `7b8fa03ea43f <https://github.com/open-power/hostboot/commit/7b8fa03ea43f>`__ |
| 1569 | Mirror new file: cen\_pll\_initf\_errors.xml \* |
| 1570 | `be0a3a2a7f4a <https://github.com/open-power/hostboot/commit/be0a3a2a7f4a>`__ |
| 1571 | p9\_sbe\_hreset - Adding I2C Bit rate divisor calculation \* |
| 1572 | `edbb12014deb <https://github.com/open-power/hostboot/commit/edbb12014deb>`__ |
| 1573 | L3 update - p9\_cme\_sram\_access HWP \* |
| 1574 | `245f7224088e <https://github.com/open-power/hostboot/commit/245f7224088e>`__ |
| 1575 | Mirror (new) p9\_putmemproc HWP files \* |
| 1576 | `b8522e84fe03 <https://github.com/open-power/hostboot/commit/b8522e84fe03>`__ |
| 1577 | p9\_build\_smp -- use ADU chipops to switch fabric configuration part #1 |
| 1578 | \* |
| 1579 | `df5241f06802 <https://github.com/open-power/hostboot/commit/df5241f06802>`__ |
| 1580 | Setup p9c CHI's FIRs and enable host attentions \* |
| 1581 | `53b3c1f1d859 <https://github.com/open-power/hostboot/commit/53b3c1f1d859>`__ |
| 1582 | HB supports - Use ADU chipops to switch fabric configuration \* |
| 1583 | `0b8f08a0e4f7 <https://github.com/open-power/hostboot/commit/0b8f08a0e4f7>`__ |
| 1584 | Fix HWSV duplicate enum build errors |
| 1585 | |
| 1586 | Tom Sand (1): \* |
| 1587 | `82769e0a939f <https://github.com/open-power/hostboot/commit/82769e0a939f>`__ |
| 1588 | Fixed HBRT issue where virt addr not unmapped at the end of complex |
| 1589 | calls. |
| 1590 | |
| 1591 | Tsung Yeung (3): \* |
| 1592 | `4e84db479b0c <https://github.com/open-power/hostboot/commit/4e84db479b0c>`__ |
| 1593 | Adds self-refresh entry/exit commands \* |
| 1594 | `1d3c28511935 <https://github.com/open-power/hostboot/commit/1d3c28511935>`__ |
| 1595 | Adds ccs workaround to support SRE/SRX \* |
| 1596 | `d1e10cd97287 <https://github.com/open-power/hostboot/commit/d1e10cd97287>`__ |
| 1597 | Adds read wr\_vref function to support P9 NVDIMM post restore |
| 1598 | |
| 1599 | Vaibhav Jain (1): \* |
| 1600 | `24d0d344bb8d <https://github.com/open-power/hostboot/commit/24d0d344bb8d>`__ |
| 1601 | Modify eSEL script to not ignore cases for command line options |
| 1602 | |
| 1603 | Venkatesh Sainath (6): \* |
| 1604 | `5099a01fc800 <https://github.com/open-power/hostboot/commit/5099a01fc800>`__ |
| 1605 | Enabling multi proc master systems \* |
| 1606 | `550f6f5cfc2f <https://github.com/open-power/hostboot/commit/550f6f5cfc2f>`__ |
| 1607 | Perl script for generating HDAT structures from MRW \* |
| 1608 | `5bb1802ad0ae <https://github.com/open-power/hostboot/commit/5bb1802ad0ae>`__ |
| 1609 | Enabling Fleetwood Multi-node istep 18 attributes \* |
| 1610 | `d226d009365f <https://github.com/open-power/hostboot/commit/d226d009365f>`__ |
| 1611 | Parsing Abus targeting information from Obus Targets \* |
| 1612 | `9e90e3ccee3c <https://github.com/open-power/hostboot/commit/9e90e3ccee3c>`__ |
| 1613 | Setting PEER TARGET for smpgroup targets \* |
| 1614 | `b3073568dbd8 <https://github.com/open-power/hostboot/commit/b3073568dbd8>`__ |
| 1615 | Fixing processor ordinal id for multinode systems |
| 1616 | |
| 1617 | Yue Du (3): \* |
| 1618 | `cfcd66d8907e <https://github.com/open-power/hostboot/commit/cfcd66d8907e>`__ |
| 1619 | STOP: Fix FF\_BYPASS in sgpe\_init \* |
| 1620 | `d5866aa3d221 <https://github.com/open-power/hostboot/commit/d5866aa3d221>`__ |
| 1621 | STOP/PState: SGPE/PGPE Error Handling Support \* |
| 1622 | `458cb0d58acf <https://github.com/open-power/hostboot/commit/458cb0d58acf>`__ |
| 1623 | STOP: Fix PLS deepest when stop4+ due to self restore wakeup |
| 1624 | |
| 1625 | Zane Shelley (16): \* |
| 1626 | `ac21d7508c54 <https://github.com/open-power/hostboot/commit/ac21d7508c54>`__ |
| 1627 | PRD: latest from RAS XML \* |
| 1628 | `42216acb89cb <https://github.com/open-power/hostboot/commit/42216acb89cb>`__ |
| 1629 | PRD: No gard on MCA for AUE/IAUE and RCD parity errors \* |
| 1630 | `1f14c2229e43 <https://github.com/open-power/hostboot/commit/1f14c2229e43>`__ |
| 1631 | PRD: error path handling in CS isolation \* |
| 1632 | `f74d2c56712b <https://github.com/open-power/hostboot/commit/f74d2c56712b>`__ |
| 1633 | PRD: Fixed target for PCI chiplet FIRs during OP checkstop analysis \* |
| 1634 | `b7bc33f10f89 <https://github.com/open-power/hostboot/commit/b7bc33f10f89>`__ |
| 1635 | RAS XML: updates from spreadsheet v115 \* |
| 1636 | `d1c569251281 <https://github.com/open-power/hostboot/commit/d1c569251281>`__ |
| 1637 | PRD: fixed no gard when PLL and CS at same time \* |
| 1638 | `2935800fa74d <https://github.com/open-power/hostboot/commit/2935800fa74d>`__ |
| 1639 | PRD: generic solution to associate HWP failures with PRD isolation \* |
| 1640 | `ecedb32fc183 <https://github.com/open-power/hostboot/commit/ecedb32fc183>`__ |
| 1641 | PRD: DIMM callouts on RCD parity errors \* |
| 1642 | `d55a6fa5234f <https://github.com/open-power/hostboot/commit/d55a6fa5234f>`__ |
| 1643 | PRD: generic solution to associate HWP failures with PRD isolation \* |
| 1644 | `21638f7fe690 <https://github.com/open-power/hostboot/commit/21638f7fe690>`__ |
| 1645 | PRD: updates from RAS spreadsheet v123 \* |
| 1646 | `1959b18ec677 <https://github.com/open-power/hostboot/commit/1959b18ec677>`__ |
| 1647 | PRD: clear old symbol marks in TPS analysis \* |
| 1648 | `4bfb911cfa14 <https://github.com/open-power/hostboot/commit/4bfb911cfa14>`__ |
| 1649 | PRD: Additional target support for Predictive Dyn Mem Deconfig \* |
| 1650 | `e1e02033728c <https://github.com/open-power/hostboot/commit/e1e02033728c>`__ |
| 1651 | PRD: NPUFIR updates per request from hardware team \* |
| 1652 | `80f8bb319679 <https://github.com/open-power/hostboot/commit/80f8bb319679>`__ |
| 1653 | PRD: VPD not getting cleared when all repairs used up during memdiag \* |
| 1654 | `5b1c0a872db9 <https://github.com/open-power/hostboot/commit/5b1c0a872db9>`__ |
| 1655 | PRD: Memory leak in prdfScanFacility \* |
| 1656 | `c71f2db5cfb5 <https://github.com/open-power/hostboot/commit/c71f2db5cfb5>`__ |
| 1657 | PRD: RAS doc updates for CRESP errors |
| 1658 | |
| 1659 | aravnair-in (2): \* |
| 1660 | `dfe15202fa42 <https://github.com/open-power/hostboot/commit/dfe15202fa42>`__ |
| 1661 | Fix node ordinal numbering to handle Fleetwood \* |
| 1662 | `536ae2496674 <https://github.com/open-power/hostboot/commit/536ae2496674>`__ |
| 1663 | Changes to make the DIMMs show up in Fleetwood |
| 1664 | |
| 1665 | manichow (1): \* |
| 1666 | `198f186b138f <https://github.com/open-power/hostboot/commit/198f186b138f>`__ |
| 1667 | Changes for TOD support in MPIPL. |
| 1668 | |
| 1669 | nagurram-in (4): \* |
| 1670 | `aed872bfb917 <https://github.com/open-power/hostboot/commit/aed872bfb917>`__ |
| 1671 | HDAT: Feature flag settings movement from PCRD to IPLP \* |
| 1672 | `d9513029321d <https://github.com/open-power/hostboot/commit/d9513029321d>`__ |
| 1673 | HDAT:Adding address to HRMOR stash location in HB reserve \* |
| 1674 | `af203750b8e6 <https://github.com/open-power/hostboot/commit/af203750b8e6>`__ |
| 1675 | HDAT : Update init feature flag settings for P9 \* |
| 1676 | `63580395a77a <https://github.com/open-power/hostboot/commit/63580395a77a>`__ |
| 1677 | HDAT : Fix for NVLINK Lane swap issue |
| 1678 | |
| 1679 | spashabk-in (2): \* |
| 1680 | `5e94a704fe27 <https://github.com/open-power/hostboot/commit/5e94a704fe27>`__ |
| 1681 | Change FAPI\_IMP traces in p9\_pm\_ocb\_init to FAPI\_DBG \* |
| 1682 | `4c1c57f0015e <https://github.com/open-power/hostboot/commit/4c1c57f0015e>`__ |
| 1683 | Create and allow for PNOR SBE Partition to have DD2.2 Images |
| 1684 | |
| 1685 | Package: occ |
| 1686 | ------------ |
| 1687 | |
| 1688 | `Repository <https://github.com/open-power/occ>`__ |
| 1689 | |
| 1690 | Patches |
| 1691 | ~~~~~~~ |
| 1692 | |
| 1693 | Commits |
| 1694 | ~~~~~~~ |
| 1695 | |
| 1696 | Andres Lugo-Reyes (8): \* |
| 1697 | `5f4122b9d99c <https://github.com/open-power/occ/commit/5f4122b9d99c>`__ |
| 1698 | Snapshot buffer support \* |
| 1699 | `0b07301e60af <https://github.com/open-power/occ/commit/0b07301e60af>`__ |
| 1700 | Clean up TODO for deprecated sync request bit \* |
| 1701 | `5bca1deebf80 <https://github.com/open-power/occ/commit/5bca1deebf80>`__ |
| 1702 | Initialize ping/pong buffer address variable \* |
| 1703 | `b14a5af2c1a4 <https://github.com/open-power/occ/commit/b14a5af2c1a4>`__ |
| 1704 | Prevent safe mode when going to nominal and no cores configured \* |
| 1705 | `bfd62d9cfdd3 <https://github.com/open-power/occ/commit/bfd62d9cfdd3>`__ |
| 1706 | Prevent WOF reset request on ZZ-L systems \* |
| 1707 | `4d2912987d23 <https://github.com/open-power/occ/commit/4d2912987d23>`__ |
| 1708 | OCC: Call Home Data Log \* |
| 1709 | `c04d58bd549c <https://github.com/open-power/occ/commit/c04d58bd549c>`__ |
| 1710 | WOF Phase 2: Use Vratio from PGPE \* |
| 1711 | `f72f857b7e5a <https://github.com/open-power/occ/commit/f72f857b7e5a>`__ |
| 1712 | WOF: Fix incorrect scaling of IQ currents |
| 1713 | |
| 1714 | Chris Cain (8): \* |
| 1715 | `d90b1dcc9552 <https://github.com/open-power/occ/commit/d90b1dcc9552>`__ |
| 1716 | AVSbus Re-sync Bus Error Recovery \* |
| 1717 | `0e91ced92e0f <https://github.com/open-power/occ/commit/0e91ced92e0f>`__ |
| 1718 | Remove interrupt handlers for hardware errors \* |
| 1719 | `358d11e6aca5 <https://github.com/open-power/occ/commit/358d11e6aca5>`__ |
| 1720 | Stop DIMM and GPU accesses when moving to standby or safe state \* |
| 1721 | `601b1ebb9a9c <https://github.com/open-power/occ/commit/601b1ebb9a9c>`__ |
| 1722 | Remove unused variable \* |
| 1723 | `d0f8e5fb2c5a <https://github.com/open-power/occ/commit/d0f8e5fb2c5a>`__ |
| 1724 | Always use normal temperature thresholds for OPAL systems \* |
| 1725 | `06ef7787e762 <https://github.com/open-power/occ/commit/06ef7787e762>`__ |
| 1726 | Handle redundant power supply policy \* |
| 1727 | `cb8e695fc661 <https://github.com/open-power/occ/commit/cb8e695fc661>`__ |
| 1728 | Build elog with non-info severity before adding callouts \* |
| 1729 | `fce2d94a9bc9 <https://github.com/open-power/occ/commit/fce2d94a9bc9>`__ |
| 1730 | Update buildname 12/15 |
| 1731 | |
| 1732 | Doug Gilbert (3): \* |
| 1733 | `ccdfc6a407fd <https://github.com/open-power/occ/commit/ccdfc6a407fd>`__ |
| 1734 | OCC work-around for HW426350 \* |
| 1735 | `8b90dab9d243 <https://github.com/open-power/occ/commit/8b90dab9d243>`__ |
| 1736 | B1112AD7 reported over long stress run \* |
| 1737 | `0bf193d8d4f9 <https://github.com/open-power/occ/commit/0bf193d8d4f9>`__ |
| 1738 | APSS Reset Support |
| 1739 | |
| 1740 | Sooraj Nair (2): \* |
| 1741 | `1da6b089c930 <https://github.com/open-power/occ/commit/1da6b089c930>`__ |
| 1742 | Permanent fix for SW399904(fixed nvlink/uav) \* |
| 1743 | `d868b77dfc6a <https://github.com/open-power/occ/commit/d868b77dfc6a>`__ |
| 1744 | nvlink,xlink,phb fixes |
| 1745 | |
| 1746 | William Bryan (5): \* |
| 1747 | `dbb4d7e88cf3 <https://github.com/open-power/occ/commit/dbb4d7e88cf3>`__ |
| 1748 | GPE1 Binary 10/27 \* |
| 1749 | `178a035668bd <https://github.com/open-power/occ/commit/178a035668bd>`__ |
| 1750 | Update buildname 11/3 \* |
| 1751 | `40fc6b399896 <https://github.com/open-power/occ/commit/40fc6b399896>`__ |
| 1752 | Buildname 11/10 \* |
| 1753 | `c3446978c169 <https://github.com/open-power/occ/commit/c3446978c169>`__ |
| 1754 | Update buildname 11/15 \* |
| 1755 | `00123c66a1d2 <https://github.com/open-power/occ/commit/00123c66a1d2>`__ |
| 1756 | Update GPE1 Binary 1/16/18 |
| 1757 | |
| 1758 | Zane Shelley (2): \* |
| 1759 | `a5b5103756c8 <https://github.com/open-power/occ/commit/a5b5103756c8>`__ |
| 1760 | FIRDATA: fix error handling for SCOMs via SBE FIFO \* |
| 1761 | `cd42091d9a39 <https://github.com/open-power/occ/commit/cd42091d9a39>`__ |
| 1762 | FIRDATA: retry getSCOMs via SBE FIFO on bad response |
| 1763 | |
| 1764 | mbroyles (9): \* |
| 1765 | `0d7b82e82f98 <https://github.com/open-power/occ/commit/0d7b82e82f98>`__ |
| 1766 | VRM Vdd Thermal Control Loop \* |
| 1767 | `bb703e413c36 <https://github.com/open-power/occ/commit/bb703e413c36>`__ |
| 1768 | Prevent logging 2A11 when quad is offline \* |
| 1769 | `aec1db2cadee <https://github.com/open-power/occ/commit/aec1db2cadee>`__ |
| 1770 | Temporary disable 24x7 on FSP systems \* |
| 1771 | `01ae49578a8e <https://github.com/open-power/occ/commit/01ae49578a8e>`__ |
| 1772 | Use AVS bus for processor power when no APSS channel for proc power is |
| 1773 | present \* |
| 1774 | `49ea880a7789 <https://github.com/open-power/occ/commit/49ea880a7789>`__ |
| 1775 | Wait two ticks prior to un-throttling memory due to power capping \* |
| 1776 | `ee8bac060be4 <https://github.com/open-power/occ/commit/ee8bac060be4>`__ |
| 1777 | Ignore bad quad and nest DTS \* |
| 1778 | `c35818138337 <https://github.com/open-power/occ/commit/c35818138337>`__ |
| 1779 | OCC error log clean up \* |
| 1780 | `2397cb606cda <https://github.com/open-power/occ/commit/2397cb606cda>`__ |
| 1781 | Handle PGPE timeouts as workaround for prolonged droop events \* |
| 1782 | `577915f28604 <https://github.com/open-power/occ/commit/577915f28604>`__ |
| 1783 | Add WOF disable param for ASM |
| 1784 | |
| 1785 | Package: op-build |
| 1786 | ----------------- |
| 1787 | |
| 1788 | `Repository <https://github.com/open-power/op-build>`__ |
| 1789 | |
| 1790 | Patches |
| 1791 | ~~~~~~~ |
| 1792 | |
| 1793 | Commits |
| 1794 | ~~~~~~~ |
| 1795 | |
| 1796 | No changes. ## Package: p9dsu-xml |
| 1797 | `Repository <https://github.com/open-power/p9dsu-xml>`__ |
| 1798 | |
| 1799 | Patches |
| 1800 | ~~~~~~~ |
| 1801 | |
| 1802 | Commits |
| 1803 | ~~~~~~~ |
| 1804 | |
| 1805 | jim (22): \* |
| 1806 | `619af4d3a6b8 <https://github.com/open-power/p9dsu-xml/commit/619af4d3a6b8>`__ |
| 1807 | add tpm\_required\_sensor. \* |
| 1808 | `3ad0bfb80270 <https://github.com/open-power/p9dsu-xml/commit/3ad0bfb80270>`__ |
| 1809 | WOF\_POWER\_LIMIT = turbo, SYSTEM\_WOF\_DISABLE = off \* |
| 1810 | `e8840e390273 <https://github.com/open-power/p9dsu-xml/commit/e8840e390273>`__ |
| 1811 | DDR4 VPD update via PNOR. Issue 328. \* |
| 1812 | `347d26450a76 <https://github.com/open-power/p9dsu-xml/commit/347d26450a76>`__ |
| 1813 | hostboot code needs CLASS\_SP for bmc-0. Issue 366. \* |
| 1814 | `c8a42e16e88c <https://github.com/open-power/p9dsu-xml/commit/c8a42e16e88c>`__ |
| 1815 | add WOF data. \* |
| 1816 | `4ad589cd285f <https://github.com/open-power/p9dsu-xml/commit/4ad589cd285f>`__ |
| 1817 | add target tpm-0. \* |
| 1818 | `313281bb804c <https://github.com/open-power/p9dsu-xml/commit/313281bb804c>`__ |
| 1819 | add skipper-14 as a child of p9dsu-0. \* |
| 1820 | `73b7b43c60b0 <https://github.com/open-power/p9dsu-xml/commit/73b7b43c60b0>`__ |
| 1821 | CLOCK\_PLL\_MUX = 0x80030000. \* |
| 1822 | `c4639d667d49 <https://github.com/open-power/p9dsu-xml/commit/c4639d667d49>`__ |
| 1823 | MRW memory power updates for Boston LC \* |
| 1824 | `a0a5f8539dca <https://github.com/open-power/p9dsu-xml/commit/a0a5f8539dca>`__ |
| 1825 | Change default lane eq values for GEN3 \* |
| 1826 | `6d7309844f08 <https://github.com/open-power/p9dsu-xml/commit/6d7309844f08>`__ |
| 1827 | update MEMD VPD for Boston LC. \* |
| 1828 | `383390ce6c9f <https://github.com/open-power/p9dsu-xml/commit/383390ce6c9f>`__ |
| 1829 | Support DDR4 @2666 in Single Drop. MAX\_ALLOWED\_DIMM\_FREQ |
| 1830 | 2400,2400,2400,2133,2133 -> changes to 2666,2666,2666,2133,2133 |
| 1831 | MSS\_MRW\_SUPPORTED\_FREQ 1866,2133,2400,0 -> changes to |
| 1832 | 1866,2133,2400,2666 ASYNC\_NEST\_FREQ\_MHZ 1600 -> change to 1866 |
| 1833 | FREQ\_PB\_MHZ 1600 -> change to 1866 \* |
| 1834 | `e30477a2eb0e <https://github.com/open-power/p9dsu-xml/commit/e30477a2eb0e>`__ |
| 1835 | add default value FREQ\_PB\_MHZ\_POUNDV\_FALLBACK = 1600 \* |
| 1836 | `6bdebbb55f26 <https://github.com/open-power/p9dsu-xml/commit/6bdebbb55f26>`__ |
| 1837 | SYSTEM\_VDM\_DISABLE = 1. \* |
| 1838 | `4e04c867ae40 <https://github.com/open-power/p9dsu-xml/commit/4e04c867ae40>`__ |
| 1839 | Re-enable VDM. SYSTEM\_VDM\_DISABLE = 0 \* |
| 1840 | `c11556752854 <https://github.com/open-power/p9dsu-xml/commit/c11556752854>`__ |
| 1841 | Enable STOP5. SUPPORTED\_STOP\_STATES = 0xEC000000. \* |
| 1842 | `3c273c710fea <https://github.com/open-power/p9dsu-xml/commit/3c273c710fea>`__ |
| 1843 | disable stop5. \* |
| 1844 | `c3df36c06bb8 <https://github.com/open-power/p9dsu-xml/commit/c3df36c06bb8>`__ |
| 1845 | add WOF data for dd2.2 parts. \* |
| 1846 | `82908139d269 <https://github.com/open-power/p9dsu-xml/commit/82908139d269>`__ |
| 1847 | Adding OPEN\_POWER\_N\_PLUS\_ONE\_HPC\_BULK\_POWER\_LIMIT\_WATTS \* |
| 1848 | `51574c64c031 <https://github.com/open-power/p9dsu-xml/commit/51574c64c031>`__ |
| 1849 | Refclk MRW change needed for WOF. FREQ\_PROC\_REFCLOCK\_KHZ 0x20788 -> |
| 1850 | 0x208D5 \* |
| 1851 | `7dfd3c0c5228 <https://github.com/open-power/p9dsu-xml/commit/7dfd3c0c5228>`__ |
| 1852 | Remove FSI\_LINK attribute from fsim-X global settings This was |
| 1853 | overriding the intended MRW values with an empty string which eventually |
| 1854 | resulted in incorrectly processed FSI data on the slave proc \* |
| 1855 | `fb5f9334aa0c <https://github.com/open-power/p9dsu-xml/commit/fb5f9334aa0c>`__ |
| 1856 | disable stop4. |
| 1857 | |
| 1858 | Package: palmetto-xml |
| 1859 | --------------------- |
| 1860 | |
| 1861 | `Repository <https://github.com/open-power/palmetto-xml>`__ |
| 1862 | |
| 1863 | Patches |
| 1864 | ~~~~~~~ |
| 1865 | |
| 1866 | Commits |
| 1867 | ~~~~~~~ |
| 1868 | |
| 1869 | No changes. ## Package: petitboot |
| 1870 | `Repository <https://github.com/open-power/petitboot>`__ |
| 1871 | |
| 1872 | Patches |
| 1873 | ~~~~~~~ |
| 1874 | |
| 1875 | - `petitboot-01-autotools-Add-autopoint-generated-files.patch <https://github.com/open-power/op-build/tree/v1.21/openpower/package/petitboot/petitboot-01-autotools-Add-autopoint-generated-files.patch>`__ |
| 1876 | |
| 1877 | Commits |
| 1878 | ~~~~~~~ |
| 1879 | |
| 1880 | Cyril Bur (4): \* |
| 1881 | `669083ee9eda <https://github.com/open-power/petitboot/commit/669083ee9eda>`__ |
| 1882 | Add root .gitignore \* |
| 1883 | `eb9c570fa13b <https://github.com/open-power/petitboot/commit/eb9c570fa13b>`__ |
| 1884 | configure.ac: Fix unmatched brackets \* |
| 1885 | `17f04cb4d3d8 <https://github.com/open-power/petitboot/commit/17f04cb4d3d8>`__ |
| 1886 | Fix bootstrap warning: noinst\_PROGRAMS was already defined \* |
| 1887 | `bc8b183fbea6 <https://github.com/open-power/petitboot/commit/bc8b183fbea6>`__ |
| 1888 | Better recognition of ncurses header files |
| 1889 | |
| 1890 | Samuel Mendoza-Jonas (4): \* |
| 1891 | `8d1e4f053574 <https://github.com/open-power/petitboot/commit/8d1e4f053574>`__ |
| 1892 | ui/ncurses: Safely handle lost terminal control commands \* |
| 1893 | `3af2c04787af <https://github.com/open-power/petitboot/commit/3af2c04787af>`__ |
| 1894 | ui/ncurses: Handle arrow key variants \* |
| 1895 | `f18998f6aac3 <https://github.com/open-power/petitboot/commit/f18998f6aac3>`__ |
| 1896 | ui/ncurses: Always cancel autoboot on exit \* |
| 1897 | `1ad12fe5b75e <https://github.com/open-power/petitboot/commit/1ad12fe5b75e>`__ |
| 1898 | discover/pxe-parser: Fix relative parsing for manual config files |
| 1899 | |
| 1900 | Package: pnor |
| 1901 | ------------- |
| 1902 | |
| 1903 | `Repository <https://github.com/open-power/pnor>`__ |
| 1904 | |
| 1905 | Patches |
| 1906 | ~~~~~~~ |
| 1907 | |
| 1908 | Commits |
| 1909 | ~~~~~~~ |
| 1910 | |
| 1911 | No changes. ## Package: romulus-xml |
| 1912 | `Repository <https://github.com/open-power/romulus-xml>`__ |
| 1913 | |
| 1914 | Patches |
| 1915 | ~~~~~~~ |
| 1916 | |
| 1917 | Commits |
| 1918 | ~~~~~~~ |
| 1919 | |
| 1920 | Bill Hoffa (1): \* |
| 1921 | `690ff82375a2 <https://github.com/open-power/romulus-xml/commit/690ff82375a2>`__ |
| 1922 | Remove FSI\_LINK attribute from fsim-X global settings |
| 1923 | |
| 1924 | Hank Chang (1): \* |
| 1925 | `a8e017aca599 <https://github.com/open-power/romulus-xml/commit/a8e017aca599>`__ |
| 1926 | Updated MSS\_MRW\_MAX\_NUMBER\_DIMMS\_POSSIBLE\_PER\_VMEM\_REGULATOR to |
| 1927 | 8 for full DIMMs configuration |
| 1928 | |
| 1929 | Mengze Liao (2): \* |
| 1930 | `7564819dde1e <https://github.com/open-power/romulus-xml/commit/7564819dde1e>`__ |
| 1931 | Update the clock pll mux config \* |
| 1932 | `78c497c58ba4 <https://github.com/open-power/romulus-xml/commit/78c497c58ba4>`__ |
| 1933 | Enable wof by set WOF\_DISABLE as OFF |
| 1934 | |
| 1935 | Nickolaus Gruendler (6): \* |
| 1936 | `fc67afe8cd7b <https://github.com/open-power/romulus-xml/commit/fc67afe8cd7b>`__ |
| 1937 | Adding some WOF attributes \* |
| 1938 | `d7f686869366 <https://github.com/open-power/romulus-xml/commit/d7f686869366>`__ |
| 1939 | Add Stop5, Add fallback attribute for 1866 \* |
| 1940 | `4e21e5b9f961 <https://github.com/open-power/romulus-xml/commit/4e21e5b9f961>`__ |
| 1941 | Revert "Add Stop5, Add fallback attribute for 1866" \* |
| 1942 | `0fd8622d52ba <https://github.com/open-power/romulus-xml/commit/0fd8622d52ba>`__ |
| 1943 | Revert "Revert "Add Stop5, Add fallback attribute for 1866"" \* |
| 1944 | `c99f42f206fe <https://github.com/open-power/romulus-xml/commit/c99f42f206fe>`__ |
| 1945 | Update Async Nest Freq to 1866 \* |
| 1946 | `bec4516ef7a6 <https://github.com/open-power/romulus-xml/commit/bec4516ef7a6>`__ |
| 1947 | Add wofdata csv |
| 1948 | |
| 1949 | Package: sbe |
| 1950 | ------------ |
| 1951 | |
| 1952 | `Repository <https://github.com/open-power/sbe>`__ |
| 1953 | |
| 1954 | Patches |
| 1955 | ~~~~~~~ |
| 1956 | |
| 1957 | Commits |
| 1958 | ~~~~~~~ |
| 1959 | |
| 1960 | Adam Hale (1): \* |
| 1961 | `66cd2309b4ea <https://github.com/open-power/sbe/commit/66cd2309b4ea>`__ |
| 1962 | Expand PGPE optrace to Main Mem - No fnctl coreq rqmt image build vs |
| 1963 | hcode |
| 1964 | |
| 1965 | Amit Tendolkar (3): \* |
| 1966 | `2dab7d4053aa <https://github.com/open-power/sbe/commit/2dab7d4053aa>`__ |
| 1967 | Cache/Core stop clocks: add shut down of Power Management to remove |
| 1968 | contentions \* |
| 1969 | `be19efc55754 <https://github.com/open-power/sbe/commit/be19efc55754>`__ |
| 1970 | Enhance SBE Deadman FFDC Format and sequencing \* |
| 1971 | `e97e84d0f782 <https://github.com/open-power/sbe/commit/e97e84d0f782>`__ |
| 1972 | Enable FFDC Collection for SBE Deadman Timeout |
| 1973 | |
| 1974 | Andre Marin (1): \* |
| 1975 | `9ed4b071deda <https://github.com/open-power/sbe/commit/9ed4b071deda>`__ |
| 1976 | Add VPD lookup to build a supported frequency list, and bin-down support |
| 1977 | |
| 1978 | Anusha Reddy Rangareddygari (1): \* |
| 1979 | `291ef16dcb1e <https://github.com/open-power/sbe/commit/291ef16dcb1e>`__ |
| 1980 | osclite status check in clock\_test2 |
| 1981 | |
| 1982 | Ben Gass (2): \* |
| 1983 | `823230170598 <https://github.com/open-power/sbe/commit/823230170598>`__ |
| 1984 | Adding p9c\_11 support. \* |
| 1985 | `e1097cc1dfcb <https://github.com/open-power/sbe/commit/e1097cc1dfcb>`__ |
| 1986 | Adding p9a support. |
| 1987 | |
| 1988 | Brian Vanderpool (1): \* |
| 1989 | `6f1c9f559f3d <https://github.com/open-power/sbe/commit/6f1c9f559f3d>`__ |
| 1990 | PM: Ignore allow\_reg\_wakeup in cache contained mode |
| 1991 | |
| 1992 | Chris Steffen (1): \* |
| 1993 | `1186568fa81d <https://github.com/open-power/sbe/commit/1186568fa81d>`__ |
| 1994 | P9 SBE EOL Toggle SBE Procedure |
| 1995 | |
| 1996 | Christian Geddes (3): \* |
| 1997 | `7a439687019f <https://github.com/open-power/sbe/commit/7a439687019f>`__ |
| 1998 | Increase suspend\_powman timeouts from 10 micro sec -> 10 milli sec \* |
| 1999 | `99c1c76cc825 <https://github.com/open-power/sbe/commit/99c1c76cc825>`__ |
| 2000 | Remove writable property from ATTR\_LINK\_TRAIN \* |
| 2001 | `dd54c6fc0af5 <https://github.com/open-power/sbe/commit/dd54c6fc0af5>`__ |
| 2002 | Add FABRIC\_PRESENT\_GROUPS system attribute |
| 2003 | |
| 2004 | Claus Michael Olsen (19): \* |
| 2005 | `8247c1a74c10 <https://github.com/open-power/sbe/commit/8247c1a74c10>`__ |
| 2006 | Centaur ring support - TOR API \* |
| 2007 | `2551c3e8b1d8 <https://github.com/open-power/sbe/commit/2551c3e8b1d8>`__ |
| 2008 | Overlays and multi-DD XIP related updates to xip\_image and |
| 2009 | dd\_container \* |
| 2010 | `608cfa2810b3 <https://github.com/open-power/sbe/commit/608cfa2810b3>`__ |
| 2011 | Small change to dd container header file. \* |
| 2012 | `9f2e80824408 <https://github.com/open-power/sbe/commit/9f2e80824408>`__ |
| 2013 | cleanup: xip\_tool: Fixing two command arguments. \* |
| 2014 | `348d8d20dc49 <https://github.com/open-power/sbe/commit/348d8d20dc49>`__ |
| 2015 | HW425038 INT ARX timeout workaround - Updated initfiles to 49241 \* |
| 2016 | `ba0028f0e907 <https://github.com/open-power/sbe/commit/ba0028f0e907>`__ |
| 2017 | Update: xip\_tool: Introducing image section type (IST). \* |
| 2018 | `53acf553711c <https://github.com/open-power/sbe/commit/53acf553711c>`__ |
| 2019 | Support for PPE commit 49883 to error out on non-TOR ring section. \* |
| 2020 | `871d02a4e2c6 <https://github.com/open-power/sbe/commit/871d02a4e2c6>`__ |
| 2021 | Code restruct: TOR API \* |
| 2022 | `8e0caa8e381d <https://github.com/open-power/sbe/commit/8e0caa8e381d>`__ |
| 2023 | Error out on non-TOR ring section detection. \* |
| 2024 | `d9ebe234862c <https://github.com/open-power/sbe/commit/d9ebe234862c>`__ |
| 2025 | Override filter ring support for perv\_pll\_bndy\_bucket rings. \* |
| 2026 | `4640d0953dd6 <https://github.com/open-power/sbe/commit/4640d0953dd6>`__ |
| 2027 | Removing P9\_XIP\_ITEM\_NOT\_FOUND trace out msg from p9\_xip\_image.C |
| 2028 | \* |
| 2029 | `efddbeeb75d9 <https://github.com/open-power/sbe/commit/efddbeeb75d9>`__ |
| 2030 | Adding CT\_P9A to the enum list of chip types. \* |
| 2031 | `d4106818dcc1 <https://github.com/open-power/sbe/commit/d4106818dcc1>`__ |
| 2032 | Overlays and multi-DD XIP related updates to xip\_image and |
| 2033 | dd\_container \* |
| 2034 | `12529174e471 <https://github.com/open-power/sbe/commit/12529174e471>`__ |
| 2035 | xip\_customize and TOR API: Improved DD level verification \* |
| 2036 | `385957bda422 <https://github.com/open-power/sbe/commit/385957bda422>`__ |
| 2037 | p9\_dd\_container: Introducing DD container API lib to PPE repo \* |
| 2038 | `69f0bcd5c893 <https://github.com/open-power/sbe/commit/69f0bcd5c893>`__ |
| 2039 | Moving DD specific ring coord from TOR to XIP (step 2) \* |
| 2040 | `ef7615644823 <https://github.com/open-power/sbe/commit/ef7615644823>`__ |
| 2041 | Additional risk level support - (step 1) Backward compatibility \* |
| 2042 | `37930cd26aee <https://github.com/open-power/sbe/commit/37930cd26aee>`__ |
| 2043 | Fix to TOR API failure on 32b systems \* |
| 2044 | `0aae9a8e68ab <https://github.com/open-power/sbe/commit/0aae9a8e68ab>`__ |
| 2045 | Bug fix to TOR API to not check TOR header version against TOR\_VERSION |
| 2046 | |
| 2047 | Dan Crowell (2): \* |
| 2048 | `f5ee8955f2bb <https://github.com/open-power/sbe/commit/f5ee8955f2bb>`__ |
| 2049 | Revert ATTR\_CEN\_ECID back to ATTR\_ECID \* |
| 2050 | `c21e72cf477a <https://github.com/open-power/sbe/commit/c21e72cf477a>`__ |
| 2051 | Add Fallback Frequency for #V Bucket Selection |
| 2052 | |
| 2053 | Daniel Howe (2): \* |
| 2054 | `c2b4524ea3b0 <https://github.com/open-power/sbe/commit/c2b4524ea3b0>`__ |
| 2055 | Allow lpc\_ed for p9n 2.2 per HW418117 fix \* |
| 2056 | `d3f8a78ac0d1 <https://github.com/open-power/sbe/commit/d3f8a78ac0d1>`__ |
| 2057 | update data token init to use scans on p9c 1.1 |
| 2058 | |
| 2059 | David Kauer (2): \* |
| 2060 | `854ee9444a93 <https://github.com/open-power/sbe/commit/854ee9444a93>`__ |
| 2061 | HW425038 INT ARX timeout workaround \* |
| 2062 | `dc787af07394 <https://github.com/open-power/sbe/commit/dc787af07394>`__ |
| 2063 | Modify INT FIR configuration settings |
| 2064 | |
| 2065 | Doug Gilbert (2): \* |
| 2066 | `2f7237360522 <https://github.com/open-power/sbe/commit/2f7237360522>`__ |
| 2067 | Use HCode header timebase frequency for pk trace \* |
| 2068 | `74f757c5baf0 <https://github.com/open-power/sbe/commit/74f757c5baf0>`__ |
| 2069 | PPE: Adjust the maximum decrementer count |
| 2070 | |
| 2071 | Greg Still (2): \* |
| 2072 | `16834c6819a4 <https://github.com/open-power/sbe/commit/16834c6819a4>`__ |
| 2073 | PM: Disable core hang buster \* |
| 2074 | `77f320df4411 <https://github.com/open-power/sbe/commit/77f320df4411>`__ |
| 2075 | Security: add AVSBus bridge registers to whitelist |
| 2076 | |
| 2077 | Jennifer A. Stofer (1): \* |
| 2078 | `29a1f8977c0c <https://github.com/open-power/sbe/commit/29a1f8977c0c>`__ |
| 2079 | Revert "Adding p9a support." |
| 2080 | |
| 2081 | Jenny Huynh (2): \* |
| 2082 | `0d217e279a9d <https://github.com/open-power/sbe/commit/0d217e279a9d>`__ |
| 2083 | Workaround for Quaint Gate, Angry Reindeer \* |
| 2084 | `4a5ddf0d16a1 <https://github.com/open-power/sbe/commit/4a5ddf0d16a1>`__ |
| 2085 | Updating HW414700 to also apply to Cumulus DD10 |
| 2086 | |
| 2087 | Joachim Fenkes (4): \* |
| 2088 | `fdcf15d4d7b7 <https://github.com/open-power/sbe/commit/fdcf15d4d7b7>`__ |
| 2089 | p9\_sbe\_npll\_setup: Enable Spread Spectrum right after SS PLL lock \* |
| 2090 | `70f95047d661 <https://github.com/open-power/sbe/commit/70f95047d661>`__ |
| 2091 | p9\_sbe\_tp\_chiplet\_init3: Honor PCI osc selection when checking for |
| 2092 | osc errors \* |
| 2093 | `ac2deccdd5c7 <https://github.com/open-power/sbe/commit/ac2deccdd5c7>`__ |
| 2094 | p9\_sbe\_chiplet\_reset: Remove SIM\_ONLY conditional around delay \* |
| 2095 | `5d91747c062f <https://github.com/open-power/sbe/commit/5d91747c062f>`__ |
| 2096 | HDCT: Remove core trace arrays, permanent P9 erratum |
| 2097 | |
| 2098 | Joe McGill (21): \* |
| 2099 | `3a7ffbc58d55 <https://github.com/open-power/sbe/commit/3a7ffbc58d55>`__ |
| 2100 | p9\_sbe\_check\_quiesce -- dont attempt PHB DMA quiesce if ETU is |
| 2101 | already in reset \* |
| 2102 | `a99727e54d98 <https://github.com/open-power/sbe/commit/a99727e54d98>`__ |
| 2103 | IO, FBC updates to enable ABUS for Fleetwood \* |
| 2104 | `7a920c44fc65 <https://github.com/open-power/sbe/commit/7a920c44fc65>`__ |
| 2105 | mvpd\_access\_defs.H -- add enum for AW keyword access \* |
| 2106 | `3d41a2c1dc50 <https://github.com/open-power/sbe/commit/3d41a2c1dc50>`__ |
| 2107 | p9.filter.pll.scan.intifile -- set 0 BGoffset for P9C DD1.1 \* |
| 2108 | `5888fd570b00 <https://github.com/open-power/sbe/commit/5888fd570b00>`__ |
| 2109 | remove NV iovalid assertion from FW and add scan inits to resolve glsmux |
| 2110 | xstate \* |
| 2111 | `e4435bbe9132 <https://github.com/open-power/sbe/commit/e4435bbe9132>`__ |
| 2112 | Chip address extension workaround for HW423589 (option2), part1 \* |
| 2113 | `01f19f848283 <https://github.com/open-power/sbe/commit/01f19f848283>`__ |
| 2114 | p9\_mss\_eff\_grouping -- fix mirrored memory mapping bug introduced by |
| 2115 | 49290 \* |
| 2116 | `4d8b2fe78a66 <https://github.com/open-power/sbe/commit/4d8b2fe78a66>`__ |
| 2117 | support customized application of filter PLL buckets from AW MVPD |
| 2118 | keyword \* |
| 2119 | `f9ba70879a5a <https://github.com/open-power/sbe/commit/f9ba70879a5a>`__ |
| 2120 | disable ECC bypass for Cumulus DD1.0 \* |
| 2121 | `86ae83c5d6a4 <https://github.com/open-power/sbe/commit/86ae83c5d6a4>`__ |
| 2122 | MCD disable workaround for HW423589 (option1) \* |
| 2123 | `a95f3b5f7c11 <https://github.com/open-power/sbe/commit/a95f3b5f7c11>`__ |
| 2124 | fix ADU setup for MCD disabled operation \* |
| 2125 | `7d85e24ccf7d <https://github.com/open-power/sbe/commit/7d85e24ccf7d>`__ |
| 2126 | apply rings from Centaur HW image \* |
| 2127 | `db3e87fc9342 <https://github.com/open-power/sbe/commit/db3e87fc9342>`__ |
| 2128 | Disable read data delay for Cumulus DD1.0, enable for DD1.1 \* |
| 2129 | `fd258b059364 <https://github.com/open-power/sbe/commit/fd258b059364>`__ |
| 2130 | p9\_xbus\_fir\_utils.H -- create header for definition of XBUS related |
| 2131 | FIR settings \* |
| 2132 | `abd33f794b04 <https://github.com/open-power/sbe/commit/abd33f794b04>`__ |
| 2133 | shift XBUS FIR programming inits for secure boot \* |
| 2134 | `6995522a60cb <https://github.com/open-power/sbe/commit/6995522a60cb>`__ |
| 2135 | p9\_build\_smp -- use ADU chipops to switch fabric configuration part #2 |
| 2136 | \* |
| 2137 | `035b8ccbe617 <https://github.com/open-power/sbe/commit/035b8ccbe617>`__ |
| 2138 | cresp address error handling updates \* |
| 2139 | `1f773f1f2983 <https://github.com/open-power/sbe/commit/1f773f1f2983>`__ |
| 2140 | update OBUS PLL buckets for p9n dd22, p9c dd11 \* |
| 2141 | `a1e6077dfeba <https://github.com/open-power/sbe/commit/a1e6077dfeba>`__ |
| 2142 | p9.npu.scom.initfile -- limit DCP0 credits for HW437173 \* |
| 2143 | `92d0dc997d18 <https://github.com/open-power/sbe/commit/92d0dc997d18>`__ |
| 2144 | enforce strict 512 GB per socket limit on Witherspoon memory map \* |
| 2145 | `2661ddab7984 <https://github.com/open-power/sbe/commit/2661ddab7984>`__ |
| 2146 | enforce strict 512 GB per socket limit on Witherspoon memory map (part2) |
| 2147 | |
| 2148 | Joel Stanley (1): \* |
| 2149 | `fca1480ab551 <https://github.com/open-power/sbe/commit/fca1480ab551>`__ |
| 2150 | fapi2: Fix template call sites for GCC 7 |
| 2151 | |
| 2152 | John Rell (1): \* |
| 2153 | `fc81ad0fabee <https://github.com/open-power/sbe/commit/fc81ad0fabee>`__ |
| 2154 | jgr171017 Setting changes for Obus boardwire vs cable |
| 2155 | |
| 2156 | Lennard Streat (1): \* |
| 2157 | `736951421915 <https://github.com/open-power/sbe/commit/736951421915>`__ |
| 2158 | Workaround for Warlike Parasite (HW430546) |
| 2159 | |
| 2160 | Luke C. Murray (4): \* |
| 2161 | `71e4d374a79a <https://github.com/open-power/sbe/commit/71e4d374a79a>`__ |
| 2162 | Turning on NCU tlbie pacing by default \* |
| 2163 | `62551f8feb3a <https://github.com/open-power/sbe/commit/62551f8feb3a>`__ |
| 2164 | Adding attribute to turn memory early data on \* |
| 2165 | `60fa6f5edfbd <https://github.com/open-power/sbe/commit/60fa6f5edfbd>`__ |
| 2166 | Enabling L2 64B store prediction \* |
| 2167 | `7623a9095db4 <https://github.com/open-power/sbe/commit/7623a9095db4>`__ |
| 2168 | Increase cache data timeout values |
| 2169 | |
| 2170 | Martin Peschke (2): \* |
| 2171 | `dbb8adce3d25 <https://github.com/open-power/sbe/commit/dbb8adce3d25>`__ |
| 2172 | p9\_dd\_container: simple generic standalone DD level container \* |
| 2173 | `b47bb02590da <https://github.com/open-power/sbe/commit/b47bb02590da>`__ |
| 2174 | p9\_dd\_container: simple generic standalone DD level container |
| 2175 | |
| 2176 | Matt Derksen (1): \* |
| 2177 | `3a0f83c7c8ef <https://github.com/open-power/sbe/commit/3a0f83c7c8ef>`__ |
| 2178 | EKB side of changes for attributeOverride tool in x86.nfp context |
| 2179 | |
| 2180 | Michael Floyd (1): \* |
| 2181 | `74c0e5367a43 <https://github.com/open-power/sbe/commit/74c0e5367a43>`__ |
| 2182 | CME Code Size Reduction ATTEMPT#3 |
| 2183 | |
| 2184 | Nick Bofferding (3): \* |
| 2185 | `277f0f10f796 <https://github.com/open-power/sbe/commit/277f0f10f796>`__ |
| 2186 | Secure Boot: Temporarily whitelist various registers to resolve |
| 2187 | blacklist issues \* |
| 2188 | `972609cc9fcb <https://github.com/open-power/sbe/commit/972609cc9fcb>`__ |
| 2189 | Secure Boot: Add p9\_setup\_dpll\_values scom registers to whitelist \* |
| 2190 | `615f07e237ef <https://github.com/open-power/sbe/commit/615f07e237ef>`__ |
| 2191 | Secure Boot: Blacklist: Finalize SBE white/blacklist |
| 2192 | |
| 2193 | Nick Klazynski (10): \* |
| 2194 | `e3d1c5ac78ce <https://github.com/open-power/sbe/commit/e3d1c5ac78ce>`__ |
| 2195 | Add HW425526 and HW425027 \* |
| 2196 | `55c0c777de88 <https://github.com/open-power/sbe/commit/55c0c777de88>`__ |
| 2197 | Fixing NCU and Core generated initfiles core to support CDD1.1 \* |
| 2198 | `f3e9580127e0 <https://github.com/open-power/sbe/commit/f3e9580127e0>`__ |
| 2199 | HW403465 applies to all chips; Revert NDD2.1 RL; add SW406970 \* |
| 2200 | `26ab9613acc2 <https://github.com/open-power/sbe/commit/26ab9613acc2>`__ |
| 2201 | Nimbus DD2.2 core chickenswitches \* |
| 2202 | `57ab16ed1e8c <https://github.com/open-power/sbe/commit/57ab16ed1e8c>`__ |
| 2203 | Large update for security \* |
| 2204 | `26dd5796f9f6 <https://github.com/open-power/sbe/commit/26dd5796f9f6>`__ |
| 2205 | Fix three NDD2.1 dials and add new NDD2.2 workarounds \* |
| 2206 | `3d86b50a746e <https://github.com/open-power/sbe/commit/3d86b50a746e>`__ |
| 2207 | Add new TM IMC, Add TLBIE hangbuster \* |
| 2208 | `60bbd1a8b644 <https://github.com/open-power/sbe/commit/60bbd1a8b644>`__ |
| 2209 | Implement security IMCs, based on v29 of wiki \* |
| 2210 | `ccbe4229fe20 <https://github.com/open-power/sbe/commit/ccbe4229fe20>`__ |
| 2211 | Two LTPTR workarounds, remove LTPTR serialization, Fix TB IMC \* |
| 2212 | `d770b5600d91 <https://github.com/open-power/sbe/commit/d770b5600d91>`__ |
| 2213 | Enable mixed core xlate; Enable xlate protection feature; Disable LSU |
| 2214 | clockgate |
| 2215 | |
| 2216 | Prasad Bg Ranganath (5): \* |
| 2217 | `5556610f48c2 <https://github.com/open-power/sbe/commit/5556610f48c2>`__ |
| 2218 | PM: Fix QCSR and CCSR update \* |
| 2219 | `722d8a4cdb59 <https://github.com/open-power/sbe/commit/722d8a4cdb59>`__ |
| 2220 | Fix bug in cache query state procedure \* |
| 2221 | `8847e892e22f <https://github.com/open-power/sbe/commit/8847e892e22f>`__ |
| 2222 | SBE:putring: Ring Id validation check \* |
| 2223 | `d77e05e938c7 <https://github.com/open-power/sbe/commit/d77e05e938c7>`__ |
| 2224 | p9\_pstate\_parameter\_block: support removal of VFRT Vdn \* |
| 2225 | `f3d42c23647c <https://github.com/open-power/sbe/commit/f3d42c23647c>`__ |
| 2226 | Zepplin:Remove dd level check for cumulus under PPB code |
| 2227 | |
| 2228 | Prem Shanker Jha (2): \* |
| 2229 | `3c84e2307401 <https://github.com/open-power/sbe/commit/3c84e2307401>`__ |
| 2230 | STOP Recovery: Only XIR collection in HWP error path during PM Reset. \* |
| 2231 | `2d94bed48071 <https://github.com/open-power/sbe/commit/2d94bed48071>`__ |
| 2232 | PM: Generation of summarized version of STOP Recovery FFDC. |
| 2233 | |
| 2234 | Rahul Batra (3): \* |
| 2235 | `c88c2c940231 <https://github.com/open-power/sbe/commit/c88c2c940231>`__ |
| 2236 | PGPE: STOP11+WOF+SafeMode Fixes \* |
| 2237 | `a4764278f667 <https://github.com/open-power/sbe/commit/a4764278f667>`__ |
| 2238 | PGPE: Fix FIT and actuation step conflict \* |
| 2239 | `f6c6b387000c <https://github.com/open-power/sbe/commit/f6c6b387000c>`__ |
| 2240 | PM: VDM Prolonged Droop Fix |
| 2241 | |
| 2242 | Raja Das (4): \* |
| 2243 | `7f96036fea81 <https://github.com/open-power/sbe/commit/7f96036fea81>`__ |
| 2244 | Updated Backing build in customrc to move to latest Simics DD2 \* |
| 2245 | `20b1e798a82b <https://github.com/open-power/sbe/commit/20b1e798a82b>`__ |
| 2246 | PPE empty PK FFDC handler to save-off required registers \* |
| 2247 | `c68fb43ecf21 <https://github.com/open-power/sbe/commit/c68fb43ecf21>`__ |
| 2248 | PPE Registers to be saved-off in the interrupt context \* |
| 2249 | `56882277747c <https://github.com/open-power/sbe/commit/56882277747c>`__ |
| 2250 | Register FFDC call is handled within machine\_check\_handler |
| 2251 | |
| 2252 | Ricardo Mata (1): \* |
| 2253 | `fc526ece8110 <https://github.com/open-power/sbe/commit/fc526ece8110>`__ |
| 2254 | Added CI throttling support, HW init updates, and fixed a bug with tce |
| 2255 | arb. |
| 2256 | |
| 2257 | Richard J. Knight (1): \* |
| 2258 | `7f62dd04344b <https://github.com/open-power/sbe/commit/7f62dd04344b>`__ |
| 2259 | p9\_xip\_tool support for DD level section parsing |
| 2260 | |
| 2261 | Ryan Black (1): \* |
| 2262 | `a5f986ed76b3 <https://github.com/open-power/sbe/commit/a5f986ed76b3>`__ |
| 2263 | p9.npu.scom.initfile -- fix cq\_sm allocation issue at low water mark |
| 2264 | |
| 2265 | Sachin Gupta (22): \* |
| 2266 | `e487a02045d4 <https://github.com/open-power/sbe/commit/e487a02045d4>`__ |
| 2267 | Initialise ATTR\_BACKUP\_SEEPROM\_SELECT \* |
| 2268 | `f4bcd3c4260b <https://github.com/open-power/sbe/commit/f4bcd3c4260b>`__ |
| 2269 | Adding client id in FIFO interface \* |
| 2270 | `0bc318357fc8 <https://github.com/open-power/sbe/commit/0bc318357fc8>`__ |
| 2271 | Correct tracing \* |
| 2272 | `5c10f8ace1fc <https://github.com/open-power/sbe/commit/5c10f8ace1fc>`__ |
| 2273 | Update backing build \* |
| 2274 | `b125b82562fc <https://github.com/open-power/sbe/commit/b125b82562fc>`__ |
| 2275 | Revert "p9\_sbe\_npll\_setup: Enable Spread Spectrum right after SS PLL |
| 2276 | lock" \* |
| 2277 | `ea100b11fb1c <https://github.com/open-power/sbe/commit/ea100b11fb1c>`__ |
| 2278 | Reset MPIPL flag \* |
| 2279 | `9b22bc8a4342 <https://github.com/open-power/sbe/commit/9b22bc8a4342>`__ |
| 2280 | Backing build update \* |
| 2281 | `870e7c38807c <https://github.com/open-power/sbe/commit/870e7c38807c>`__ |
| 2282 | Avoid overwrite of mbx3 register \* |
| 2283 | `b99e4a419eec <https://github.com/open-power/sbe/commit/b99e4a419eec>`__ |
| 2284 | Handle command validation failure in secure mode properly \* |
| 2285 | `057add7f654f <https://github.com/open-power/sbe/commit/057add7f654f>`__ |
| 2286 | Solve compilation issue for type casting \* |
| 2287 | `633cc43fc6f8 <https://github.com/open-power/sbe/commit/633cc43fc6f8>`__ |
| 2288 | Update backing build \* |
| 2289 | `75e24e297d54 <https://github.com/open-power/sbe/commit/75e24e297d54>`__ |
| 2290 | Remove support for DD1 \* |
| 2291 | `d43ff15ada7d <https://github.com/open-power/sbe/commit/d43ff15ada7d>`__ |
| 2292 | Minor fixes to remove support for DD1 \* |
| 2293 | `5d57ec968d47 <https://github.com/open-power/sbe/commit/5d57ec968d47>`__ |
| 2294 | Do not allow invalid scom via sbe fifo path \* |
| 2295 | `93aa36ba8134 <https://github.com/open-power/sbe/commit/93aa36ba8134>`__ |
| 2296 | Avoid istep skipping in secure mode \* |
| 2297 | `3a65f5252ab5 <https://github.com/open-power/sbe/commit/3a65f5252ab5>`__ |
| 2298 | Allow Invalid scoms for simulation regression testing \* |
| 2299 | `d737f8e95da3 <https://github.com/open-power/sbe/commit/d737f8e95da3>`__ |
| 2300 | Allow read on complete OCC SRAM buffer \* |
| 2301 | `15f82bd95cd7 <https://github.com/open-power/sbe/commit/15f82bd95cd7>`__ |
| 2302 | Remove workaround for DD1 SW reset for XIVE \* |
| 2303 | `3c633a6c2cd6 <https://github.com/open-power/sbe/commit/3c633a6c2cd6>`__ |
| 2304 | Cleanup as DD1 is not supported anymore \* |
| 2305 | `4ca643fc6cbb <https://github.com/open-power/sbe/commit/4ca643fc6cbb>`__ |
| 2306 | Added flag for AWAN testing \* |
| 2307 | `25624c1917a9 <https://github.com/open-power/sbe/commit/25624c1917a9>`__ |
| 2308 | Revert "p9\_sbe\_npll\_setup: Enable Spread Spectrum right after SS PLL |
| 2309 | lock"" \* |
| 2310 | `55fa8007fdbb <https://github.com/open-power/sbe/commit/55fa8007fdbb>`__ |
| 2311 | Support new RISK level attribute values |
| 2312 | |
| 2313 | Santosh Puranik (2): \* |
| 2314 | `2e4607a018b7 <https://github.com/open-power/sbe/commit/2e4607a018b7>`__ |
| 2315 | Make plat init attributes non-writable \* |
| 2316 | `f14d2ae6eb3f <https://github.com/open-power/sbe/commit/f14d2ae6eb3f>`__ |
| 2317 | Remove writeable tag from ATTR\_PROC\_FABRIC\_GROUP\_ID |
| 2318 | |
| 2319 | Soma BhanuTej (2): \* |
| 2320 | `67a37783b04b <https://github.com/open-power/sbe/commit/67a37783b04b>`__ |
| 2321 | Fix to skip Osc check in sim only \* |
| 2322 | `699a2315f4ac <https://github.com/open-power/sbe/commit/699a2315f4ac>`__ |
| 2323 | Make SBE errors recoverable - p9\_sbe\_common |
| 2324 | |
| 2325 | Srikantha Meesala (2): \* |
| 2326 | `d9055c39cfed <https://github.com/open-power/sbe/commit/d9055c39cfed>`__ |
| 2327 | Updated PSI and TOD regs into whitelist \* |
| 2328 | `c1752197a87d <https://github.com/open-power/sbe/commit/c1752197a87d>`__ |
| 2329 | write\_whitelist add for I2C Engine and Lock / UnLock. |
| 2330 | |
| 2331 | Sumit Kumar (3): \* |
| 2332 | `0d8c248cc29e <https://github.com/open-power/sbe/commit/0d8c248cc29e>`__ |
| 2333 | Centaur ring support - ring\_apply and ring data \* |
| 2334 | `75756bf696b4 <https://github.com/open-power/sbe/commit/75756bf696b4>`__ |
| 2335 | gitRelease: Check master branch if query on rel branch fails \* |
| 2336 | `9b03db45c424 <https://github.com/open-power/sbe/commit/9b03db45c424>`__ |
| 2337 | Moving DD specific ring coord from TOR to XIP (step 1) |
| 2338 | |
| 2339 | Sunil Kumar (2): \* |
| 2340 | `584ee233b010 <https://github.com/open-power/sbe/commit/584ee233b010>`__ |
| 2341 | SW410723 chiplet ID range for address 107D0 is increased to 0x37. \* |
| 2342 | `9586bfb71025 <https://github.com/open-power/sbe/commit/9586bfb71025>`__ |
| 2343 | SW413281: Whilisting address for putscom according to HDCT.txt |
| 2344 | |
| 2345 | Thi Tran (1): \* |
| 2346 | `f55ed0656b82 <https://github.com/open-power/sbe/commit/f55ed0656b82>`__ |
| 2347 | p9\_build\_smp -- use ADU chipops to switch fabric configuration part #1 |
| 2348 | |
| 2349 | Yue Du (3): \* |
| 2350 | `7bd8c25ffc52 <https://github.com/open-power/sbe/commit/7bd8c25ffc52>`__ |
| 2351 | STOP: EX deconfigure masking for EQ chiplet FIR \* |
| 2352 | `ee644a4d14e2 <https://github.com/open-power/sbe/commit/ee644a4d14e2>`__ |
| 2353 | STOP/PState: SGPE/PGPE Error Handling Support \* |
| 2354 | `47239b3d399c <https://github.com/open-power/sbe/commit/47239b3d399c>`__ |
| 2355 | STOP: Fix PLS deepest when stop4+ due to self restore wakeup |
| 2356 | |
| 2357 | nagurram-in (1): \* |
| 2358 | `0a78e28c88a1 <https://github.com/open-power/sbe/commit/0a78e28c88a1>`__ |
| 2359 | Added chiplet range for 0x107D0 scom address in BL/WL csv |
| 2360 | |
| 2361 | spashabk-in (38): \* |
| 2362 | `d38834b0a952 <https://github.com/open-power/sbe/commit/d38834b0a952>`__ |
| 2363 | Cleanup security list \* |
| 2364 | `264dedf525f8 <https://github.com/open-power/sbe/commit/264dedf525f8>`__ |
| 2365 | Allow putring in MPIPL state \* |
| 2366 | `292319be2218 <https://github.com/open-power/sbe/commit/292319be2218>`__ |
| 2367 | Reset current\_err before sending host FFDC \* |
| 2368 | `2ad7f676c15f <https://github.com/open-power/sbe/commit/2ad7f676c15f>`__ |
| 2369 | Get FW security from CBS bit \* |
| 2370 | `0b422e48c935 <https://github.com/open-power/sbe/commit/0b422e48c935>`__ |
| 2371 | Add sbe commit id in PIBMEM \* |
| 2372 | `666c72a55f09 <https://github.com/open-power/sbe/commit/666c72a55f09>`__ |
| 2373 | Change FAPI\_IMP traces in p9\_pm\_ocb\_init to FAPI\_DBG \* |
| 2374 | `1fcbd7b14382 <https://github.com/open-power/sbe/commit/1fcbd7b14382>`__ |
| 2375 | Security binary search bug fix \* |
| 2376 | `7d7c9d3dbd1b <https://github.com/open-power/sbe/commit/7d7c9d3dbd1b>`__ |
| 2377 | Handle OCC SRAM secure mem window \* |
| 2378 | `b6054b3ff395 <https://github.com/open-power/sbe/commit/b6054b3ff395>`__ |
| 2379 | Enable DD2.2 in op build \* |
| 2380 | `1f0bc6efb217 <https://github.com/open-power/sbe/commit/1f0bc6efb217>`__ |
| 2381 | Handle security security bit in p9\_sbe\_attr\_setup \* |
| 2382 | `b69dc93d5b03 <https://github.com/open-power/sbe/commit/b69dc93d5b03>`__ |
| 2383 | Chip-op filtering \* |
| 2384 | `1c909df08fcf <https://github.com/open-power/sbe/commit/1c909df08fcf>`__ |
| 2385 | Allow getreg chipop in secure mode \* |
| 2386 | `e808b5c476c7 <https://github.com/open-power/sbe/commit/e808b5c476c7>`__ |
| 2387 | I2C reset sequence \* |
| 2388 | `819a606d9c58 <https://github.com/open-power/sbe/commit/819a606d9c58>`__ |
| 2389 | [SBE-code-re-org][1] sbefw - core and app folders \* |
| 2390 | `560106553412 <https://github.com/open-power/sbe/commit/560106553412>`__ |
| 2391 | [SBE-code-re-org][2] Chip-op handler code \* |
| 2392 | `1c7f2eb205f4 <https://github.com/open-power/sbe/commit/1c7f2eb205f4>`__ |
| 2393 | [SBE-code-re-org][3] Merge core folder makefiles \* |
| 2394 | `71ffbf448c4e <https://github.com/open-power/sbe/commit/71ffbf448c4e>`__ |
| 2395 | [SBE-code-re-org][4] Adding app common makefiles \* |
| 2396 | `25bfaab4ac12 <https://github.com/open-power/sbe/commit/25bfaab4ac12>`__ |
| 2397 | [SBE-code-re-org][5] IPL table re org \* |
| 2398 | `7843b72850e1 <https://github.com/open-power/sbe/commit/7843b72850e1>`__ |
| 2399 | Disable generic and isntruction control on DD1 \* |
| 2400 | `6b405b238ad0 <https://github.com/open-power/sbe/commit/6b405b238ad0>`__ |
| 2401 | Increase run cycle count before starting unsecure mem window test \* |
| 2402 | `c149d7d8d8b8 <https://github.com/open-power/sbe/commit/c149d7d8d8b8>`__ |
| 2403 | Enable new ADU flags \* |
| 2404 | `8a863e816e41 <https://github.com/open-power/sbe/commit/8a863e816e41>`__ |
| 2405 | [SBE-code-re-org][6] Build configuration \* |
| 2406 | `3f49215b05fa <https://github.com/open-power/sbe/commit/3f49215b05fa>`__ |
| 2407 | Update timer chipop support \* |
| 2408 | `42a5e95b317e <https://github.com/open-power/sbe/commit/42a5e95b317e>`__ |
| 2409 | I2C reset on instruction machine check \* |
| 2410 | `cfd3efd98fd2 <https://github.com/open-power/sbe/commit/cfd3efd98fd2>`__ |
| 2411 | SBE user plugin in x86.nfp context \* |
| 2412 | `ba9022fcf967 <https://github.com/open-power/sbe/commit/ba9022fcf967>`__ |
| 2413 | Reduce the HB memory window to 10MB \* |
| 2414 | `a9a87cd013c6 <https://github.com/open-power/sbe/commit/a9a87cd013c6>`__ |
| 2415 | Release helper script \* |
| 2416 | `c47554f1d2ee <https://github.com/open-power/sbe/commit/c47554f1d2ee>`__ |
| 2417 | Update testcase for secure ADU operations \* |
| 2418 | `6db778b0fd24 <https://github.com/open-power/sbe/commit/6db778b0fd24>`__ |
| 2419 | [SBE-code-re-org][7] App and core files separation \* |
| 2420 | `fd23b3ff6d75 <https://github.com/open-power/sbe/commit/fd23b3ff6d75>`__ |
| 2421 | Track integrate command fix \* |
| 2422 | `ccf737710b21 <https://github.com/open-power/sbe/commit/ccf737710b21>`__ |
| 2423 | Reverting change in img\_def.mk for model build \* |
| 2424 | `095e608c7f68 <https://github.com/open-power/sbe/commit/095e608c7f68>`__ |
| 2425 | Fix SBE install in op-build \* |
| 2426 | `5f8ecd10377c <https://github.com/open-power/sbe/commit/5f8ecd10377c>`__ |
| 2427 | Move istep chip-op handler to pibmem \* |
| 2428 | `7be7840a672a <https://github.com/open-power/sbe/commit/7be7840a672a>`__ |
| 2429 | Store SBE failed rc for async FFDC \* |
| 2430 | `513d71673012 <https://github.com/open-power/sbe/commit/513d71673012>`__ |
| 2431 | Move trace array to seeprom \* |
| 2432 | `7e9136341e34 <https://github.com/open-power/sbe/commit/7e9136341e34>`__ |
| 2433 | Capture rc in Async FFDC usecases \* |
| 2434 | `fb9f9e8bc940 <https://github.com/open-power/sbe/commit/fb9f9e8bc940>`__ |
| 2435 | Checkstop detection during IPL SBE steps \* |
| 2436 | `dadcf14ae978 <https://github.com/open-power/sbe/commit/dadcf14ae978>`__ |
| 2437 | Project specific makefile changes |
| 2438 | |
| 2439 | Package: skiboot |
| 2440 | ---------------- |
| 2441 | |
| 2442 | `Repository <https://github.com/open-power/skiboot>`__ |
| 2443 | |
| 2444 | Patches |
| 2445 | ~~~~~~~ |
| 2446 | |
| 2447 | Commits |
| 2448 | ~~~~~~~ |
| 2449 | |
| 2450 | Adriana Kobylak (2): \* |
| 2451 | `b786e7ba1d34 <https://github.com/open-power/skiboot/commit/b786e7ba1d34>`__ |
| 2452 | pflash: Support for volatile flag \* |
| 2453 | `0bd6a8c9a4bc <https://github.com/open-power/skiboot/commit/0bd6a8c9a4bc>`__ |
| 2454 | pflash: Support for clean\_on\_ecc\_error flag |
| 2455 | |
| 2456 | Akshay Adiga (10): \* |
| 2457 | `1953b41e1dd5 <https://github.com/open-power/skiboot/commit/1953b41e1dd5>`__ |
| 2458 | SLW: Add idle state stop5 for DD2.0 and above \* |
| 2459 | `6d2e281bc22f <https://github.com/open-power/skiboot/commit/6d2e281bc22f>`__ |
| 2460 | SLW: Delay cpuidle device-tree creation \* |
| 2461 | `bfec00682a57 <https://github.com/open-power/skiboot/commit/bfec00682a57>`__ |
| 2462 | SLW: Split init functions \* |
| 2463 | `9aeb00de9cbd <https://github.com/open-power/skiboot/commit/9aeb00de9cbd>`__ |
| 2464 | SLW: Call slw\_late\_init\_p{8, 9} only when has\_wakeup\_engine is set |
| 2465 | \* |
| 2466 | `313ece47903e <https://github.com/open-power/skiboot/commit/313ece47903e>`__ |
| 2467 | SLW: Use wakeup\_engine state to handle errors in wakeup engine \* |
| 2468 | `35c66b8ce5a2 <https://github.com/open-power/skiboot/commit/35c66b8ce5a2>`__ |
| 2469 | SLW: Move MAMBO simulator checks to slw\_init \* |
| 2470 | `a523298bc1e3 <https://github.com/open-power/skiboot/commit/a523298bc1e3>`__ |
| 2471 | SLW: Detect if deep states are enabled \* |
| 2472 | `e5c663c3f6de <https://github.com/open-power/skiboot/commit/e5c663c3f6de>`__ |
| 2473 | SLW: Call p9\_stop\_api only if deep\_states are enabled \* |
| 2474 | `c613c2fb9b82 <https://github.com/open-power/skiboot/commit/c613c2fb9b82>`__ |
| 2475 | SCOM restore for DARN and XIVE \* |
| 2476 | `7def6cdac27f <https://github.com/open-power/skiboot/commit/7def6cdac27f>`__ |
| 2477 | SLW: Add p9\_stop\_api calls for IMC |
| 2478 | |
| 2479 | Alexey Kardashevskiy (1): \* |
| 2480 | `893660c3e4ee <https://github.com/open-power/skiboot/commit/893660c3e4ee>`__ |
| 2481 | npu2/tce: Fix page size checking |
| 2482 | |
| 2483 | Alistair Popple (7): \* |
| 2484 | `6f8c49b0bac4 <https://github.com/open-power/skiboot/commit/6f8c49b0bac4>`__ |
| 2485 | Witherspoon: Remove old Witherspoon platform definition \* |
| 2486 | `8cbc15556621 <https://github.com/open-power/skiboot/commit/8cbc15556621>`__ |
| 2487 | npu2.c: Fix XIVE IRQ alignment \* |
| 2488 | `695bb562a315 <https://github.com/open-power/skiboot/commit/695bb562a315>`__ |
| 2489 | npu2.c: Add PE error detection \* |
| 2490 | `91f3e391f27a <https://github.com/open-power/skiboot/commit/91f3e391f27a>`__ |
| 2491 | npu2-hw-procedures.c: Power up lanes during ntl reset \* |
| 2492 | `ea9b3080559a <https://github.com/open-power/skiboot/commit/ea9b3080559a>`__ |
| 2493 | npu2-hw-procedures.c: Correct phy lane mapping \* |
| 2494 | `55c13bd1231a <https://github.com/open-power/skiboot/commit/55c13bd1231a>`__ |
| 2495 | core/device.c: Fix dt\_find\_compatible\_node \* |
| 2496 | `ae422255bfa3 <https://github.com/open-power/skiboot/commit/ae422255bfa3>`__ |
| 2497 | npu2: Disable TVT range check when in bypass mode |
| 2498 | |
| 2499 | Ananth N Mavinakayanahalli (1): \* |
| 2500 | `bd64f85b8581 <https://github.com/open-power/skiboot/commit/bd64f85b8581>`__ |
| 2501 | fsp: Bail out of HIR if FSP is resetting voluntarily |
| 2502 | |
| 2503 | Andrew Donnellan (2): \* |
| 2504 | `302aedd78371 <https://github.com/open-power/skiboot/commit/302aedd78371>`__ |
| 2505 | npu2: Remove unused npu2\_dev struct members \* |
| 2506 | `729520fd9aa9 <https://github.com/open-power/skiboot/commit/729520fd9aa9>`__ |
| 2507 | Update .gitignore |
| 2508 | |
| 2509 | Balbir Singh (2): \* |
| 2510 | `b57a5380aa48 <https://github.com/open-power/skiboot/commit/b57a5380aa48>`__ |
| 2511 | hw/npu2: Implement logging HMI actions \* |
| 2512 | `4133e973b4f2 <https://github.com/open-power/skiboot/commit/4133e973b4f2>`__ |
| 2513 | hw/npu2: support creset of npu2 devices |
| 2514 | |
| 2515 | Benjamin Herrenschmidt (23): \* |
| 2516 | `484d26fd6e65 <https://github.com/open-power/skiboot/commit/484d26fd6e65>`__ |
| 2517 | xive: Update inits for DD2.0 \* |
| 2518 | `7c2a76705674 <https://github.com/open-power/skiboot/commit/7c2a76705674>`__ |
| 2519 | xive: Fix ability to clear some EQ flags \* |
| 2520 | `a1cd5529a84c <https://github.com/open-power/skiboot/commit/a1cd5529a84c>`__ |
| 2521 | phb4: Fix lost bit in PE number on config accesses \* |
| 2522 | `4002ea166fde <https://github.com/open-power/skiboot/commit/4002ea166fde>`__ |
| 2523 | phb4: Fix PE mapping of M32 BAR \* |
| 2524 | `9ce34f369ce2 <https://github.com/open-power/skiboot/commit/9ce34f369ce2>`__ |
| 2525 | xive: Define API for single-escalation VP mode \* |
| 2526 | `d7e26801905f <https://github.com/open-power/skiboot/commit/d7e26801905f>`__ |
| 2527 | xive: When disabling an EQ, wipe all of its settings \* |
| 2528 | `639ed194dedc <https://github.com/open-power/skiboot/commit/639ed194dedc>`__ |
| 2529 | xive: Improve cleaning up of EQs \* |
| 2530 | `ddc35b93fcad <https://github.com/open-power/skiboot/commit/ddc35b93fcad>`__ |
| 2531 | xive: When disabling a VP, wipe all of its settings \* |
| 2532 | `de82c2e0ece6 <https://github.com/open-power/skiboot/commit/de82c2e0ece6>`__ |
| 2533 | xive: Implement "single escalation" feature \* |
| 2534 | `4a9288465a95 <https://github.com/open-power/skiboot/commit/4a9288465a95>`__ |
| 2535 | xive: Quieten debug messages in standard builds \* |
| 2536 | `6b1cc437315d <https://github.com/open-power/skiboot/commit/6b1cc437315d>`__ |
| 2537 | xive: Properly reserve built-in VPs in non-group mode \* |
| 2538 | `7d385d1b942c <https://github.com/open-power/skiboot/commit/7d385d1b942c>`__ |
| 2539 | xive: Warn on valid VPs found in abnormal cases \* |
| 2540 | `7db8a9a31649 <https://github.com/open-power/skiboot/commit/7db8a9a31649>`__ |
| 2541 | xive: Don't bother cleaning up disabled EQs in reset \* |
| 2542 | `17cd974074e6 <https://github.com/open-power/skiboot/commit/17cd974074e6>`__ |
| 2543 | xive: Remove obsolete comment \* |
| 2544 | `b504f2737e9b <https://github.com/open-power/skiboot/commit/b504f2737e9b>`__ |
| 2545 | timer: Stop calling list\_top() racily \* |
| 2546 | `2d98b41e4c30 <https://github.com/open-power/skiboot/commit/2d98b41e4c30>`__ |
| 2547 | xive: Mark a freed IRQ's IVE as valid and masked \* |
| 2548 | `3e7f04a7398a <https://github.com/open-power/skiboot/commit/3e7f04a7398a>`__ |
| 2549 | xive: Do not return a trigger page for an escalation interrupt \* |
| 2550 | `238ef01e330f <https://github.com/open-power/skiboot/commit/238ef01e330f>`__ |
| 2551 | io: Add load\_wait() helper \* |
| 2552 | `1e00d546ca29 <https://github.com/open-power/skiboot/commit/1e00d546ca29>`__ |
| 2553 | xive: Fix occasional VC checkstops in xive\_reset \* |
| 2554 | `84febad7c5f9 <https://github.com/open-power/skiboot/commit/84febad7c5f9>`__ |
| 2555 | xive: Ensure VC informational FIRs are masked \* |
| 2556 | `c7f2fab5c785 <https://github.com/open-power/skiboot/commit/c7f2fab5c785>`__ |
| 2557 | Add support for new gcc 7 parametrized stack protector \* |
| 2558 | `ca612b802ada <https://github.com/open-power/skiboot/commit/ca612b802ada>`__ |
| 2559 | lock: Move cmpxchg() primitives to their own file \* |
| 2560 | `76d9bcdca589 <https://github.com/open-power/skiboot/commit/76d9bcdca589>`__ |
| 2561 | lock: Add additional lock auditing code |
| 2562 | |
| 2563 | Christophe Lombard (3): \* |
| 2564 | `8b6c089342c7 <https://github.com/open-power/skiboot/commit/8b6c089342c7>`__ |
| 2565 | capi: update ci store buffers and dma engines \* |
| 2566 | `5c221866c88f <https://github.com/open-power/skiboot/commit/5c221866c88f>`__ |
| 2567 | capi: move the acknowledge of the HMI interrupt \* |
| 2568 | `e88bb694d32e <https://github.com/open-power/skiboot/commit/e88bb694d32e>`__ |
| 2569 | capi: Fix the max tlbi divider and the directory size. |
| 2570 | |
| 2571 | Claudio Carvalho (20): \* |
| 2572 | `4fb528b39411 <https://github.com/open-power/skiboot/commit/4fb528b39411>`__ |
| 2573 | libstb: move drivers/sha512.\* to mbedtls directory \* |
| 2574 | `594c7a6ae3cc <https://github.com/open-power/skiboot/commit/594c7a6ae3cc>`__ |
| 2575 | libstb: import stb\_init() breaking it into multiple files \* |
| 2576 | `75dbbe674c0f <https://github.com/open-power/skiboot/commit/75dbbe674c0f>`__ |
| 2577 | core/flash.c: extern function to get the name of a PNOR partition \* |
| 2578 | `060ff18d4ddc <https://github.com/open-power/skiboot/commit/060ff18d4ddc>`__ |
| 2579 | core/init.c: remove redundant calls to verify and measure BOOTKERNEL \* |
| 2580 | `3ab91fbec937 <https://github.com/open-power/skiboot/commit/3ab91fbec937>`__ |
| 2581 | libstb/secureboot.c: import sb\_verify() from stb.c \* |
| 2582 | `3281d5a41a82 <https://github.com/open-power/skiboot/commit/3281d5a41a82>`__ |
| 2583 | libstb/trustedboot.c: import tb\_measure() from stb.c \* |
| 2584 | `5c2c24ba1511 <https://github.com/open-power/skiboot/commit/5c2c24ba1511>`__ |
| 2585 | libstb/cvc.c: import softrom behavior from drivers/sw\_driver.c \* |
| 2586 | `5aaa37619602 <https://github.com/open-power/skiboot/commit/5aaa37619602>`__ |
| 2587 | libstb/trustedboot.c: import stb\_final() from stb.c \* |
| 2588 | `024bf3248101 <https://github.com/open-power/skiboot/commit/024bf3248101>`__ |
| 2589 | tpm\_i2c\_nuvoton: add nuvoton, npct601 to the compatible property \* |
| 2590 | `9781da8a262d <https://github.com/open-power/skiboot/commit/9781da8a262d>`__ |
| 2591 | libstb/tss: update the list of event types supported \* |
| 2592 | `48753eb9eb72 <https://github.com/open-power/skiboot/commit/48753eb9eb72>`__ |
| 2593 | libstb/tpm\_chip.c: define pr\_fmt and fix messages logged \* |
| 2594 | `5fdcc35fc103 <https://github.com/open-power/skiboot/commit/5fdcc35fc103>`__ |
| 2595 | core: update superseded libstb calls in flash.c and init.c \* |
| 2596 | `21a7bd0e07f6 <https://github.com/open-power/skiboot/commit/21a7bd0e07f6>`__ |
| 2597 | hdata: add secure and trusted boot ntuple to SPIRA-H/S \* |
| 2598 | `ccdbfdac637c <https://github.com/open-power/skiboot/commit/ccdbfdac637c>`__ |
| 2599 | libstb: remove stb.c and obsolete companions \* |
| 2600 | `48fd73cfc707 <https://github.com/open-power/skiboot/commit/48fd73cfc707>`__ |
| 2601 | hdata/spira: add ibm, secureboot node in P9 \* |
| 2602 | `7da364fd3646 <https://github.com/open-power/skiboot/commit/7da364fd3646>`__ |
| 2603 | hdata/tpmrel.c: add firmware event log info to the tpm node \* |
| 2604 | `f56ff29ed6f9 <https://github.com/open-power/skiboot/commit/f56ff29ed6f9>`__ |
| 2605 | hdata/tpmrel.c: add ibm, cvc device tree node \* |
| 2606 | `63110a7734e6 <https://github.com/open-power/skiboot/commit/63110a7734e6>`__ |
| 2607 | libstb: add support for ibm, secureboot-v2 \* |
| 2608 | `68a25577cd89 <https://github.com/open-power/skiboot/commit/68a25577cd89>`__ |
| 2609 | libstb/cvc: update memory-region to point to /reserved-memory \* |
| 2610 | `63ef6f54445e <https://github.com/open-power/skiboot/commit/63ef6f54445e>`__ |
| 2611 | doc: update libstb documentation with POWER9 changes |
| 2612 | |
| 2613 | Cyril Bur (19): \* |
| 2614 | `a2f15d75c20f <https://github.com/open-power/skiboot/commit/a2f15d75c20f>`__ |
| 2615 | core/pcie-slots: Fix coverity possible NULL dereference \* |
| 2616 | `8ca2d61f3b4b <https://github.com/open-power/skiboot/commit/8ca2d61f3b4b>`__ |
| 2617 | npu2: Remove side effects in assert() calls. \* |
| 2618 | `65f9abea8e8c <https://github.com/open-power/skiboot/commit/65f9abea8e8c>`__ |
| 2619 | libpore: Fix incorrect mtspr instruction generation \* |
| 2620 | `ba540e0be90f <https://github.com/open-power/skiboot/commit/ba540e0be90f>`__ |
| 2621 | external/pflash: Fix erasing within a single erase block \* |
| 2622 | `92813a8bf9f3 <https://github.com/open-power/skiboot/commit/92813a8bf9f3>`__ |
| 2623 | nvram: Fix 'missing' nvram on FSP systems. \* |
| 2624 | `60f46277f4bc <https://github.com/open-power/skiboot/commit/60f46277f4bc>`__ |
| 2625 | libflash/mbox-flash: Add v2 error codes \* |
| 2626 | `3e6c3b03bb4c <https://github.com/open-power/skiboot/commit/3e6c3b03bb4c>`__ |
| 2627 | libflash/mbox-flash: Always close windows before opening a new window \* |
| 2628 | `f47de2b05f9d <https://github.com/open-power/skiboot/commit/f47de2b05f9d>`__ |
| 2629 | libflash/mbox-flash: Move sequence handling to driver level \* |
| 2630 | `c3fc675285bc <https://github.com/open-power/skiboot/commit/c3fc675285bc>`__ |
| 2631 | libflash/mbox-flash: Allow mbox-flash to tell the driver msg timeouts \* |
| 2632 | `957503be8ea7 <https://github.com/open-power/skiboot/commit/957503be8ea7>`__ |
| 2633 | hw/lpc-mbox: Simplify message bookkeeping and timeouts \* |
| 2634 | `1095ed9fa553 <https://github.com/open-power/skiboot/commit/1095ed9fa553>`__ |
| 2635 | libflash/mbox-flash: Simplify message sending \* |
| 2636 | `de554c19bdfe <https://github.com/open-power/skiboot/commit/de554c19bdfe>`__ |
| 2637 | libflash/mbox-flash: Use BMC suggested timeout value \* |
| 2638 | `f22d5c2c3d75 <https://github.com/open-power/skiboot/commit/f22d5c2c3d75>`__ |
| 2639 | libflash/mbox-flash: Use static arrays of function pointers \* |
| 2640 | `0e040b7285cb <https://github.com/open-power/skiboot/commit/0e040b7285cb>`__ |
| 2641 | libflash/mbox-flash: Understand v3 \* |
| 2642 | `31f2c03b0abd <https://github.com/open-power/skiboot/commit/31f2c03b0abd>`__ |
| 2643 | libflash/mbox-flash: Add the ability to lock flash \* |
| 2644 | `b9774c47eecd <https://github.com/open-power/skiboot/commit/b9774c47eecd>`__ |
| 2645 | libflash/test: Add tests for mbox-flash \* |
| 2646 | `8e88ab0e66a2 <https://github.com/open-power/skiboot/commit/8e88ab0e66a2>`__ |
| 2647 | pflash: Respect write(2) return values \* |
| 2648 | `a1e45fd2793c <https://github.com/open-power/skiboot/commit/a1e45fd2793c>`__ |
| 2649 | core: Avoid possible uninitialized pointer read (CID 209502) \* |
| 2650 | `9b2136247e00 <https://github.com/open-power/skiboot/commit/9b2136247e00>`__ |
| 2651 | hdata/vpd: Remove possible dereference after null check (CID 207468) |
| 2652 | |
| 2653 | Frederic Barrat (1): \* |
| 2654 | `4f24ef23411d <https://github.com/open-power/skiboot/commit/4f24ef23411d>`__ |
| 2655 | xive: Mask MMIO load/store to bad location FIR |
| 2656 | |
| 2657 | Frédéric Bonnard (3): \* |
| 2658 | `b7546b534d95 <https://github.com/open-power/skiboot/commit/b7546b534d95>`__ |
| 2659 | Add man pages for xscom-utils and pflash \* |
| 2660 | `b472f9238dac <https://github.com/open-power/skiboot/commit/b472f9238dac>`__ |
| 2661 | Fix xscom-utils distclean target \* |
| 2662 | `b3e14c46ecb0 <https://github.com/open-power/skiboot/commit/b3e14c46ecb0>`__ |
| 2663 | Fix FTBFS with -Werror=format-overflow |
| 2664 | |
| 2665 | Guilherme G. Piccoli (1): \* |
| 2666 | `1e6cfd7d0459 <https://github.com/open-power/skiboot/commit/1e6cfd7d0459>`__ |
| 2667 | xive: Trivial fix for compilation error when enabling xive debug |
| 2668 | |
| 2669 | Jeremy Kerr (2): \* |
| 2670 | `88bd3bc5e6f8 <https://github.com/open-power/skiboot/commit/88bd3bc5e6f8>`__ |
| 2671 | opal-prd: flush after logging to stdio in debug mode \* |
| 2672 | `237cd0c50a66 <https://github.com/open-power/skiboot/commit/237cd0c50a66>`__ |
| 2673 | core: Fix mismatched names between reserved memory nodes & properties |
| 2674 | |
| 2675 | Madhavan Srinivasan (2): \* |
| 2676 | `938d1d9ed964 <https://github.com/open-power/skiboot/commit/938d1d9ed964>`__ |
| 2677 | hw/imc: alway enable "imc\_nest\_chip" exports property \* |
| 2678 | `3647e9850660 <https://github.com/open-power/skiboot/commit/3647e9850660>`__ |
| 2679 | hw/imc: Check ucode state before exposing units to Linux |
| 2680 | |
| 2681 | Mahesh Salgaonkar (8): \* |
| 2682 | `363f328fbc59 <https://github.com/open-power/skiboot/commit/363f328fbc59>`__ |
| 2683 | opal/xscom: Move the delay inside xscom\_reset() function. \* |
| 2684 | `10f0a09239dd <https://github.com/open-power/skiboot/commit/10f0a09239dd>`__ |
| 2685 | opal/xscom: Add recovery for lost core wakeup scom failures. \* |
| 2686 | `13e1ed3c97bf <https://github.com/open-power/skiboot/commit/13e1ed3c97bf>`__ |
| 2687 | opal: Get chip location code \* |
| 2688 | `282d5fee5c4f <https://github.com/open-power/skiboot/commit/282d5fee5c4f>`__ |
| 2689 | core/hmi: Use pr\_fmt macro for tagging log messages \* |
| 2690 | `c531ff957669 <https://github.com/open-power/skiboot/commit/c531ff957669>`__ |
| 2691 | opal/hmi: HMI logging with location code info. \* |
| 2692 | `b33ed1e6b6b0 <https://github.com/open-power/skiboot/commit/b33ed1e6b6b0>`__ |
| 2693 | core/hmi: Do not display FIR details if none of the bits are set. \* |
| 2694 | `45a961515be6 <https://github.com/open-power/skiboot/commit/45a961515be6>`__ |
| 2695 | core/hmi: Display chip location code while displaying core FIR. \* |
| 2696 | `3c38214ab4f0 <https://github.com/open-power/skiboot/commit/3c38214ab4f0>`__ |
| 2697 | opal/xstop: Use nvram option to enable/disable sw checkstop. |
| 2698 | |
| 2699 | Michael Ellerman (2): \* |
| 2700 | `360c92e6271c <https://github.com/open-power/skiboot/commit/360c92e6271c>`__ |
| 2701 | mambo: Add support for NUMA \* |
| 2702 | `427cc73b1eab <https://github.com/open-power/skiboot/commit/427cc73b1eab>`__ |
| 2703 | make check: Make valgrind optional |
| 2704 | |
| 2705 | Michael Neuling (14): \* |
| 2706 | `560eb231d6bf <https://github.com/open-power/skiboot/commit/560eb231d6bf>`__ |
| 2707 | phb4: Update inits \* |
| 2708 | `4f4bf83128c1 <https://github.com/open-power/skiboot/commit/4f4bf83128c1>`__ |
| 2709 | npu2: Create npu2\_write\_mcd() \* |
| 2710 | `3c0408ded5a1 <https://github.com/open-power/skiboot/commit/3c0408ded5a1>`__ |
| 2711 | npu2: Refactor BAR setting code \* |
| 2712 | `75371796ac59 <https://github.com/open-power/skiboot/commit/75371796ac59>`__ |
| 2713 | npu2: MCD refactor \* |
| 2714 | `74d9a50ac2a7 <https://github.com/open-power/skiboot/commit/74d9a50ac2a7>`__ |
| 2715 | phys-map: Rename GPU\_MEM to GPU\_MEM\_4T\_DOWN \* |
| 2716 | `c76636f3d73f <https://github.com/open-power/skiboot/commit/c76636f3d73f>`__ |
| 2717 | npu2: Move to new GPU memory map \* |
| 2718 | `4e74625dc9f1 <https://github.com/open-power/skiboot/commit/4e74625dc9f1>`__ |
| 2719 | hdata: Fix copying GEN4 lane equalisation settings \* |
| 2720 | `d957e9278994 <https://github.com/open-power/skiboot/commit/d957e9278994>`__ |
| 2721 | phb4: Fix lane equalisation setting \* |
| 2722 | `3bdce2b0e293 <https://github.com/open-power/skiboot/commit/3bdce2b0e293>`__ |
| 2723 | fsp-elog: Reduce verbosity of elog messages \* |
| 2724 | `3881970673a2 <https://github.com/open-power/skiboot/commit/3881970673a2>`__ |
| 2725 | phb4: Init changes \* |
| 2726 | `73ad014b8785 <https://github.com/open-power/skiboot/commit/73ad014b8785>`__ |
| 2727 | phb4: Change default GEN3 lane equalisation setting to 0x54 \* |
| 2728 | `5cee066746d2 <https://github.com/open-power/skiboot/commit/5cee066746d2>`__ |
| 2729 | phb4: Change PCI MMIO timers \* |
| 2730 | `852ff7e210b2 <https://github.com/open-power/skiboot/commit/852ff7e210b2>`__ |
| 2731 | IPMI: Fix platform.cec\_reboot() null ptr checks \* |
| 2732 | `737c0ba3d72b <https://github.com/open-power/skiboot/commit/737c0ba3d72b>`__ |
| 2733 | phb4: Disable lane eq when retrying some nvidia GEN3 devices |
| 2734 | |
| 2735 | Nicholas Piggin (37): \* |
| 2736 | `2df240737596 <https://github.com/open-power/skiboot/commit/2df240737596>`__ |
| 2737 | core/bitmap: fix bitmap iteration limit corruption \* |
| 2738 | `0dde9cd5d22b <https://github.com/open-power/skiboot/commit/0dde9cd5d22b>`__ |
| 2739 | external/mambo: Switch qtrace command to use plugins \* |
| 2740 | `ec82b3ea49a0 <https://github.com/open-power/skiboot/commit/ec82b3ea49a0>`__ |
| 2741 | fast-reboot: restore SMT priority on spin loop exit \* |
| 2742 | `4d9f29cab33b <https://github.com/open-power/skiboot/commit/4d9f29cab33b>`__ |
| 2743 | fast-reboot: factor out direct control loops for sreset \* |
| 2744 | `ff230a3e9cdf <https://github.com/open-power/skiboot/commit/ff230a3e9cdf>`__ |
| 2745 | fast-reboot: remove last man standing logic \* |
| 2746 | `f84a8a1c749d <https://github.com/open-power/skiboot/commit/f84a8a1c749d>`__ |
| 2747 | fast-reboot: clean up some common cpu iteration processes with macros \* |
| 2748 | `57e544ee0191 <https://github.com/open-power/skiboot/commit/57e544ee0191>`__ |
| 2749 | fast-reboot: factor out the mambo sreset code \* |
| 2750 | `5b61f7b5b477 <https://github.com/open-power/skiboot/commit/5b61f7b5b477>`__ |
| 2751 | fast-reboot: add sreset\_all\_others error handling \* |
| 2752 | `43c96b232d89 <https://github.com/open-power/skiboot/commit/43c96b232d89>`__ |
| 2753 | fast-reboot: make spin loops consistent and SMT friendly \* |
| 2754 | `068de7bc7688 <https://github.com/open-power/skiboot/commit/068de7bc7688>`__ |
| 2755 | fast-reboot: add sreset timeout detection and handling \* |
| 2756 | `171b7858a559 <https://github.com/open-power/skiboot/commit/171b7858a559>`__ |
| 2757 | fast-reboot: add more barriers around cpu state changes \* |
| 2758 | `3598f41970f2 <https://github.com/open-power/skiboot/commit/3598f41970f2>`__ |
| 2759 | fast-reboot: remove delay after sreset \* |
| 2760 | `674be30c9437 <https://github.com/open-power/skiboot/commit/674be30c9437>`__ |
| 2761 | fast-reboot: inline fast\_reset\_p8 into fast\_reboot \* |
| 2762 | `4610c27825a1 <https://github.com/open-power/skiboot/commit/4610c27825a1>`__ |
| 2763 | fast-reboot: move de-asserting of special wakeups to the initiator \* |
| 2764 | `1647413d7c2f <https://github.com/open-power/skiboot/commit/1647413d7c2f>`__ |
| 2765 | fast-reboot: allow mambo fast reboot independent of CPU type \* |
| 2766 | `be43a0489e06 <https://github.com/open-power/skiboot/commit/be43a0489e06>`__ |
| 2767 | fast-reboot: move sreset direct controls to direct-controls.c \* |
| 2768 | `1949c768eba6 <https://github.com/open-power/skiboot/commit/1949c768eba6>`__ |
| 2769 | direct-controls: change p8\_sreset\_all\_others sequence \* |
| 2770 | `44687f84e443 <https://github.com/open-power/skiboot/commit/44687f84e443>`__ |
| 2771 | direct-controls: p8 implementation of generic direct controls \* |
| 2772 | `1e85912b9210 <https://github.com/open-power/skiboot/commit/1e85912b9210>`__ |
| 2773 | direct-controls: add xscom error handling for p8 \* |
| 2774 | `1486a08de557 <https://github.com/open-power/skiboot/commit/1486a08de557>`__ |
| 2775 | core/lock: Introduce atomic cmpxchg and implement try\_lock with it \* |
| 2776 | `bc74922ab1ed <https://github.com/open-power/skiboot/commit/bc74922ab1ed>`__ |
| 2777 | core/lock: improve bust\_locks \* |
| 2778 | `9c565ee6bca4 <https://github.com/open-power/skiboot/commit/9c565ee6bca4>`__ |
| 2779 | asm/head: add entry/exit calls \* |
| 2780 | `b41553c22402 <https://github.com/open-power/skiboot/commit/b41553c22402>`__ |
| 2781 | asm/head: move opal entry token check into C \* |
| 2782 | `602c6d44a302 <https://github.com/open-power/skiboot/commit/602c6d44a302>`__ |
| 2783 | core/opal: always verify cpu->pir on entry \* |
| 2784 | `0d84ea6bda03 <https://github.com/open-power/skiboot/commit/0d84ea6bda03>`__ |
| 2785 | core: Add support for quiescing OPAL \* |
| 2786 | `688c0d51e6e9 <https://github.com/open-power/skiboot/commit/688c0d51e6e9>`__ |
| 2787 | fast-reboot: quiesce opal before initiating a fast reboot \* |
| 2788 | `4cfd44c463e2 <https://github.com/open-power/skiboot/commit/4cfd44c463e2>`__ |
| 2789 | fast-reboot: improve failure error messages \* |
| 2790 | `09a2319fdebc <https://github.com/open-power/skiboot/commit/09a2319fdebc>`__ |
| 2791 | fast-reboot: move fdt freeing into init \* |
| 2792 | `6d033ce35dc1 <https://github.com/open-power/skiboot/commit/6d033ce35dc1>`__ |
| 2793 | fast-reboot: move boot CPU cleanup logically together with secondaries |
| 2794 | \* |
| 2795 | `d0e44ad2a963 <https://github.com/open-power/skiboot/commit/d0e44ad2a963>`__ |
| 2796 | fast-reboot: bare bones fast reboot implementation for POWER9 \* |
| 2797 | `acf2c345a98d <https://github.com/open-power/skiboot/commit/acf2c345a98d>`__ |
| 2798 | direct-controls: enable fast reboot direct controls for mambo \* |
| 2799 | `631ed5f2e06a <https://github.com/open-power/skiboot/commit/631ed5f2e06a>`__ |
| 2800 | dctl: p9 increase thread quiesce timeout \* |
| 2801 | `d2cc3957abef <https://github.com/open-power/skiboot/commit/d2cc3957abef>`__ |
| 2802 | fast-reboot: move pci\_reset error handling into fast-reboot code \* |
| 2803 | `3a7422851bc3 <https://github.com/open-power/skiboot/commit/3a7422851bc3>`__ |
| 2804 | core/utils: add snprintf\_symbol \* |
| 2805 | `92777d335ab3 <https://github.com/open-power/skiboot/commit/92777d335ab3>`__ |
| 2806 | core/init: manage MSR[ME] explicitly, always enable \* |
| 2807 | `d5378d2a0d54 <https://github.com/open-power/skiboot/commit/d5378d2a0d54>`__ |
| 2808 | core/exception: beautify exception handler, add MCE-involved registers |
| 2809 | \* |
| 2810 | `7f4c8e8ce0b7 <https://github.com/open-power/skiboot/commit/7f4c8e8ce0b7>`__ |
| 2811 | dt: add /cpus/ibm, powerpc-cpu-features device tree bindings |
| 2812 | |
| 2813 | Oliver O'Halloran (36): \* |
| 2814 | `370b8866871b <https://github.com/open-power/skiboot/commit/370b8866871b>`__ |
| 2815 | asm/head: Loop after attn \* |
| 2816 | `d0f06269ed3c <https://github.com/open-power/skiboot/commit/d0f06269ed3c>`__ |
| 2817 | p8-i2c: Don't write the watermark register at init \* |
| 2818 | `541e0aff3ecf <https://github.com/open-power/skiboot/commit/541e0aff3ecf>`__ |
| 2819 | gard: show: Remove "Res Recovery" field \* |
| 2820 | `bcb140d015eb <https://github.com/open-power/skiboot/commit/bcb140d015eb>`__ |
| 2821 | gard: Update chip unit data \* |
| 2822 | `5d4241ddaf44 <https://github.com/open-power/skiboot/commit/5d4241ddaf44>`__ |
| 2823 | gard: Add P9 support \* |
| 2824 | `1e038388f385 <https://github.com/open-power/skiboot/commit/1e038388f385>`__ |
| 2825 | gard: Replace is\_valid\_id with is\_valid\_record() \* |
| 2826 | `07d6b1a13412 <https://github.com/open-power/skiboot/commit/07d6b1a13412>`__ |
| 2827 | gard: Add iterators \* |
| 2828 | `f6174ffe5a2e <https://github.com/open-power/skiboot/commit/f6174ffe5a2e>`__ |
| 2829 | gard: Use iterators for count\_record() \* |
| 2830 | `998115739de1 <https://github.com/open-power/skiboot/commit/998115739de1>`__ |
| 2831 | gard: {list, show}: Fix the Type field in the output \* |
| 2832 | `e905b55bfd96 <https://github.com/open-power/skiboot/commit/e905b55bfd96>`__ |
| 2833 | gard: list: Improve output \* |
| 2834 | `1163d716518c <https://github.com/open-power/skiboot/commit/1163d716518c>`__ |
| 2835 | gard: Add path parsing support \* |
| 2836 | `6c83380260ce <https://github.com/open-power/skiboot/commit/6c83380260ce>`__ |
| 2837 | gard: create: Allow creating arbitrary GARD records \* |
| 2838 | `2ee9d0560f7d <https://github.com/open-power/skiboot/commit/2ee9d0560f7d>`__ |
| 2839 | libflash: Fix parity calculation on ARM \* |
| 2840 | `eb76931e7ae7 <https://github.com/open-power/skiboot/commit/eb76931e7ae7>`__ |
| 2841 | gard: Always use MTD to access flash \* |
| 2842 | `e947593a38a1 <https://github.com/open-power/skiboot/commit/e947593a38a1>`__ |
| 2843 | gard: Add OpenBMC vPNOR support \* |
| 2844 | `c2e404aedd52 <https://github.com/open-power/skiboot/commit/c2e404aedd52>`__ |
| 2845 | p8-i2c: Limit number of retry attempts \* |
| 2846 | `7fb517898f69 <https://github.com/open-power/skiboot/commit/7fb517898f69>`__ |
| 2847 | lpc: Clear pending IRQs at boot \* |
| 2848 | `260a11fbf3c7 <https://github.com/open-power/skiboot/commit/260a11fbf3c7>`__ |
| 2849 | occ-sensors: Fix up quad/gpu location mixup \* |
| 2850 | `afe10960c138 <https://github.com/open-power/skiboot/commit/afe10960c138>`__ |
| 2851 | external/test: Display test dir on failure \* |
| 2852 | `ac685bccd889 <https://github.com/open-power/skiboot/commit/ac685bccd889>`__ |
| 2853 | hw/nx: Fix NX BAR assignments \* |
| 2854 | `4717bc7bc859 <https://github.com/open-power/skiboot/commit/4717bc7bc859>`__ |
| 2855 | external/test: Print the name of each test \* |
| 2856 | `aee9b0218454 <https://github.com/open-power/skiboot/commit/aee9b0218454>`__ |
| 2857 | gard: Allow records with an ID of 0xffffffff \* |
| 2858 | `95a0f5d9db98 <https://github.com/open-power/skiboot/commit/95a0f5d9db98>`__ |
| 2859 | gard: Set chip generation based on PVR \* |
| 2860 | `c35f784a9f63 <https://github.com/open-power/skiboot/commit/c35f784a9f63>`__ |
| 2861 | gard: Fix up path parsing \* |
| 2862 | `90d8e71b83a8 <https://github.com/open-power/skiboot/commit/90d8e71b83a8>`__ |
| 2863 | gard: Fix max instance count \* |
| 2864 | `28b104c46ffe <https://github.com/open-power/skiboot/commit/28b104c46ffe>`__ |
| 2865 | gard: Add usage message for -p \* |
| 2866 | `a797a19687a3 <https://github.com/open-power/skiboot/commit/a797a19687a3>`__ |
| 2867 | gard: Delete stale comment \* |
| 2868 | `aa82932e7190 <https://github.com/open-power/skiboot/commit/aa82932e7190>`__ |
| 2869 | gard: Fix up do\_create return values \* |
| 2870 | `daf9ff43cd0a <https://github.com/open-power/skiboot/commit/daf9ff43cd0a>`__ |
| 2871 | gard: Add tests \* |
| 2872 | `5bb9d6f1e7dc <https://github.com/open-power/skiboot/commit/5bb9d6f1e7dc>`__ |
| 2873 | chiptod: Keep boot timestamps contiguous \* |
| 2874 | `4e23b42d2ad7 <https://github.com/open-power/skiboot/commit/4e23b42d2ad7>`__ |
| 2875 | hdata: Parse IPL FW feature settings \* |
| 2876 | `7c1765a0093d <https://github.com/open-power/skiboot/commit/7c1765a0093d>`__ |
| 2877 | hdata/i2c: Fix 512Kb EEPROM size \* |
| 2878 | `5e66cc3a347d <https://github.com/open-power/skiboot/commit/5e66cc3a347d>`__ |
| 2879 | hdat/i2c: Fix SPD EEPROM compatible string \* |
| 2880 | `ff8b83c06c26 <https://github.com/open-power/skiboot/commit/ff8b83c06c26>`__ |
| 2881 | hdata/vpd: Fix DTC warnings \* |
| 2882 | `0e2541f1c664 <https://github.com/open-power/skiboot/commit/0e2541f1c664>`__ |
| 2883 | witherspoon: Fix VPD EEPROM type \* |
| 2884 | `7a1f035b57ab <https://github.com/open-power/skiboot/commit/7a1f035b57ab>`__ |
| 2885 | hdata/iohub: Use only wildcard slots for pluggables |
| 2886 | |
| 2887 | Prem Shanker Jha (4): \* |
| 2888 | `1156b5f04b3e <https://github.com/open-power/skiboot/commit/1156b5f04b3e>`__ |
| 2889 | p9\_stop\_api: EQ SCOM Restore: Introduced version control in SCOM |
| 2890 | restore entry. \* |
| 2891 | `c4ff9557e99a <https://github.com/open-power/skiboot/commit/c4ff9557e99a>`__ |
| 2892 | p9\_stop\_api: PM: Added support for version control in SCOM restore |
| 2893 | entries. \* |
| 2894 | `43c966bdad46 <https://github.com/open-power/skiboot/commit/43c966bdad46>`__ |
| 2895 | SCOM Restore: Increased the EQ SCOM restore limit. \* |
| 2896 | `081882690163 <https://github.com/open-power/skiboot/commit/081882690163>`__ |
| 2897 | PM: Fixed generation of MTSPR instruction in STOP API. |
| 2898 | |
| 2899 | Pridhiviraj Paidipeddi (11): \* |
| 2900 | `78168d1bad23 <https://github.com/open-power/skiboot/commit/78168d1bad23>`__ |
| 2901 | NX: Print read xscom config failures. \* |
| 2902 | `c4f12c22ee95 <https://github.com/open-power/skiboot/commit/c4f12c22ee95>`__ |
| 2903 | hw/occ: Fix psr cpu-to-gpu sensors node dtc warning. \* |
| 2904 | `3e808354c311 <https://github.com/open-power/skiboot/commit/3e808354c311>`__ |
| 2905 | sensors: Fix dtc warning for dts sensors. \* |
| 2906 | `e8248d22600e <https://github.com/open-power/skiboot/commit/e8248d22600e>`__ |
| 2907 | sensors: Fix dtc warning for new occ inband sensors. \* |
| 2908 | `40b55be1035b <https://github.com/open-power/skiboot/commit/40b55be1035b>`__ |
| 2909 | hw/occ: Log proper SCOM register names \* |
| 2910 | `b90b08fc2f9a <https://github.com/open-power/skiboot/commit/b90b08fc2f9a>`__ |
| 2911 | libstb: increase the log level of verify/measure messages to PR\_NOTICE. |
| 2912 | \* |
| 2913 | `7912f9750bfc <https://github.com/open-power/skiboot/commit/7912f9750bfc>`__ |
| 2914 | libstb/tpm\_chip: Add missing new line to print messages. \* |
| 2915 | `2109b81d9f78 <https://github.com/open-power/skiboot/commit/2109b81d9f78>`__ |
| 2916 | libstb: fix failure of calling cvc verify without STB initialization. \* |
| 2917 | `b772e1132cd5 <https://github.com/open-power/skiboot/commit/b772e1132cd5>`__ |
| 2918 | libstb: fix failure of calling trusted measure without STB |
| 2919 | initialization. \* |
| 2920 | `e15174aca0ab <https://github.com/open-power/skiboot/commit/e15174aca0ab>`__ |
| 2921 | core/init: move imc catalog preload init after the STB init. \* |
| 2922 | `92a303dfeeb6 <https://github.com/open-power/skiboot/commit/92a303dfeeb6>`__ |
| 2923 | hw/occ: Fix fast-reboot crash in P8 platforms. |
| 2924 | |
| 2925 | Reza Arbab (12): \* |
| 2926 | `a05054c53a37 <https://github.com/open-power/skiboot/commit/a05054c53a37>`__ |
| 2927 | npu2: hw-procedures: Enable low power mode \* |
| 2928 | `d6f2505b1542 <https://github.com/open-power/skiboot/commit/d6f2505b1542>`__ |
| 2929 | npu2: Add npu2\_write\_mask\_4b() \* |
| 2930 | `ac6f1599ff33 <https://github.com/open-power/skiboot/commit/ac6f1599ff33>`__ |
| 2931 | npu2: hw-procedures: Add phy\_rx\_clock\_sel() \* |
| 2932 | `30ea08acc253 <https://github.com/open-power/skiboot/commit/30ea08acc253>`__ |
| 2933 | npu2: hw-procedures: Refactor reset\_ntl procedure \* |
| 2934 | `d123203cfa9f <https://github.com/open-power/skiboot/commit/d123203cfa9f>`__ |
| 2935 | Revert "npu2: hw-procedures: Enable low power mode" \* |
| 2936 | `1c5417ec1898 <https://github.com/open-power/skiboot/commit/1c5417ec1898>`__ |
| 2937 | npu2: Print bdfn in NPU2DEV\* logging macros \* |
| 2938 | `a752f2d908d1 <https://github.com/open-power/skiboot/commit/a752f2d908d1>`__ |
| 2939 | npu2: hw-procedures: Add check\_credits procedure \* |
| 2940 | `e6b5867adb7f <https://github.com/open-power/skiboot/commit/e6b5867adb7f>`__ |
| 2941 | npu2: hw-procedures: Add obus\_brick\_index() \* |
| 2942 | `4e04c833a1d4 <https://github.com/open-power/skiboot/commit/4e04c833a1d4>`__ |
| 2943 | npu2: hw-procedures: Manipulate IOVALID during training \* |
| 2944 | `878c718aed20 <https://github.com/open-power/skiboot/commit/878c718aed20>`__ |
| 2945 | npu2: hw-procedures: Change phy\_rx\_clock\_sel values \* |
| 2946 | `22df7a1c73c9 <https://github.com/open-power/skiboot/commit/22df7a1c73c9>`__ |
| 2947 | hdata/spira: Add missing newline to prlog() call \* |
| 2948 | `bfdf85c84a92 <https://github.com/open-power/skiboot/commit/bfdf85c84a92>`__ |
| 2949 | hw/phys-map: Add missing newline in log output |
| 2950 | |
| 2951 | Robert Lippert (4): \* |
| 2952 | `422cdcabb218 <https://github.com/open-power/skiboot/commit/422cdcabb218>`__ |
| 2953 | hdata/vpd: add support for parsing CPU VRML records \* |
| 2954 | `27c35b967a84 <https://github.com/open-power/skiboot/commit/27c35b967a84>`__ |
| 2955 | core/direct-controls: wait for core special wkup bit cleared \* |
| 2956 | `c5cf392b75dc <https://github.com/open-power/skiboot/commit/c5cf392b75dc>`__ |
| 2957 | core/direct-controls: add function to read core gated state \* |
| 2958 | `d665e102ef37 <https://github.com/open-power/skiboot/commit/d665e102ef37>`__ |
| 2959 | hw/dts: retry special wakeup operation if core still gated |
| 2960 | |
| 2961 | Russell Currey (7): \* |
| 2962 | `02f82a27eab8 <https://github.com/open-power/skiboot/commit/02f82a27eab8>`__ |
| 2963 | doc: Fix reference to overview in README \* |
| 2964 | `93cde639b56e <https://github.com/open-power/skiboot/commit/93cde639b56e>`__ |
| 2965 | pci: Track peers of slots \* |
| 2966 | `1172a6c57ff3 <https://github.com/open-power/skiboot/commit/1172a6c57ff3>`__ |
| 2967 | pci: Shared slot state synchronisation for hot reset \* |
| 2968 | `f397cc30bdf8 <https://github.com/open-power/skiboot/commit/f397cc30bdf8>`__ |
| 2969 | phb4: Only escalate freezes on MMIO load where necessary \* |
| 2970 | `0bb960f82ef3 <https://github.com/open-power/skiboot/commit/0bb960f82ef3>`__ |
| 2971 | Revert "pci: Shared slot state synchronisation for hot reset" \* |
| 2972 | `ac8a62b09c63 <https://github.com/open-power/skiboot/commit/ac8a62b09c63>`__ |
| 2973 | phb4: Fix TCE page size \* |
| 2974 | `08b1929052f8 <https://github.com/open-power/skiboot/commit/08b1929052f8>`__ |
| 2975 | phb3/phb4/p7ioc: Document supported TCE sizes in DT |
| 2976 | |
| 2977 | Shilpasri G Bhat (12): \* |
| 2978 | `cbbd16bfbeef <https://github.com/open-power/skiboot/commit/cbbd16bfbeef>`__ |
| 2979 | sensors: dts: Assert special wakeup on idle cores while reading |
| 2980 | temperature \* |
| 2981 | `275efcc44fda <https://github.com/open-power/skiboot/commit/275efcc44fda>`__ |
| 2982 | sensors: occ: Skip counter type of sensors \* |
| 2983 | `49999302251b <https://github.com/open-power/skiboot/commit/49999302251b>`__ |
| 2984 | opal-prd: Add support for runtime OCC reset in ZZ \* |
| 2985 | `781b10633945 <https://github.com/open-power/skiboot/commit/781b10633945>`__ |
| 2986 | opal-prd: occ: Add support for runtime OCC load/start in ZZ \* |
| 2987 | `bebe096ee242 <https://github.com/open-power/skiboot/commit/bebe096ee242>`__ |
| 2988 | sensors: occ: Skip GPU sensors for non-gpu systems \* |
| 2989 | `a05e341c9af2 <https://github.com/open-power/skiboot/commit/a05e341c9af2>`__ |
| 2990 | sensors: occ: Skip power sensors with zero sample value \* |
| 2991 | `85a1de35cbe4 <https://github.com/open-power/skiboot/commit/85a1de35cbe4>`__ |
| 2992 | fast-boot: occ: Re-parse the pstate table during fast-boot \* |
| 2993 | `725d4a2c6cc7 <https://github.com/open-power/skiboot/commit/725d4a2c6cc7>`__ |
| 2994 | core: hostservices: Remove redundant special wakeup code \* |
| 2995 | `fa3494602a3e <https://github.com/open-power/skiboot/commit/fa3494602a3e>`__ |
| 2996 | sensors: Support reading u64 sensor values \* |
| 2997 | `a5324c2da189 <https://github.com/open-power/skiboot/commit/a5324c2da189>`__ |
| 2998 | sensors: occ: Add energy counters \* |
| 2999 | `ad0861c914e8 <https://github.com/open-power/skiboot/commit/ad0861c914e8>`__ |
| 3000 | sensors: occ: Scale the sensor values \* |
| 3001 | `99505c03f493 <https://github.com/open-power/skiboot/commit/99505c03f493>`__ |
| 3002 | sensor-groups: occ: Add support to disable/enable sensor group |
| 3003 | |
| 3004 | Stewart Smith (42): \* |
| 3005 | `be1379de6e8e <https://github.com/open-power/skiboot/commit/be1379de6e8e>`__ |
| 3006 | Document fsp-ipl-params to sp-ipl-params \* |
| 3007 | `2884eeabfd93 <https://github.com/open-power/skiboot/commit/2884eeabfd93>`__ |
| 3008 | ffspart/pflash: fix tests for new VOLATILE flag \* |
| 3009 | `255c1d9a3c2b <https://github.com/open-power/skiboot/commit/255c1d9a3c2b>`__ |
| 3010 | skiboot 5.9.1 release notes \* |
| 3011 | `b3a1d3d42294 <https://github.com/open-power/skiboot/commit/b3a1d3d42294>`__ |
| 3012 | skiboot 5.9.2 release notes \* |
| 3013 | `701556d2ea9b <https://github.com/open-power/skiboot/commit/701556d2ea9b>`__ |
| 3014 | OCC: Increase max pstate check on P9 to 255 \* |
| 3015 | `e8af7effed7b <https://github.com/open-power/skiboot/commit/e8af7effed7b>`__ |
| 3016 | skiboot 5.9.3 release notes \* |
| 3017 | `0aa749e6822a <https://github.com/open-power/skiboot/commit/0aa749e6822a>`__ |
| 3018 | travis: Add Fedora 27 \* |
| 3019 | `2be4422dace9 <https://github.com/open-power/skiboot/commit/2be4422dace9>`__ |
| 3020 | core/bitmap: Test bitmap foreach functions \* |
| 3021 | `ff65dc98df8a <https://github.com/open-power/skiboot/commit/ff65dc98df8a>`__ |
| 3022 | skiboot 5.9.4 release notes \* |
| 3023 | `da719b6718a8 <https://github.com/open-power/skiboot/commit/da719b6718a8>`__ |
| 3024 | mambo: split qtrace macros out into qtrace\_utils.tcl \* |
| 3025 | `2f8c9acf8985 <https://github.com/open-power/skiboot/commit/2f8c9acf8985>`__ |
| 3026 | Add documentation for ibm, firmware-versions device tree node \* |
| 3027 | `7ca21767be95 <https://github.com/open-power/skiboot/commit/7ca21767be95>`__ |
| 3028 | Use systemsim-p9 v1.1 \* |
| 3029 | `9587573f4be0 <https://github.com/open-power/skiboot/commit/9587573f4be0>`__ |
| 3030 | sreset\_kernel: only run SMT tests due to not supporting re-entry \* |
| 3031 | `0562b64e55b0 <https://github.com/open-power/skiboot/commit/0562b64e55b0>`__ |
| 3032 | Fix booting & OPAL call return values with DEBUG=1 \* |
| 3033 | `41f51c834a1b <https://github.com/open-power/skiboot/commit/41f51c834a1b>`__ |
| 3034 | external/test: make stripping out version number more robust \* |
| 3035 | `11c76c67cb9b <https://github.com/open-power/skiboot/commit/11c76c67cb9b>`__ |
| 3036 | skiboot 5.9.5 Release Notes \* |
| 3037 | `70f14f4dd86e <https://github.com/open-power/skiboot/commit/70f14f4dd86e>`__ |
| 3038 | skiboot 5.9.6 release notes \* |
| 3039 | `7a2610a145a8 <https://github.com/open-power/skiboot/commit/7a2610a145a8>`__ |
| 3040 | external/test/test.sh: fix VERSION substitution when no tags \* |
| 3041 | `b7b7b84ef565 <https://github.com/open-power/skiboot/commit/b7b7b84ef565>`__ |
| 3042 | libflash/mbox-flash: only wait for MBOX\_DEFAULT\_POLL\_MS if busy \* |
| 3043 | `6e05c6f21b34 <https://github.com/open-power/skiboot/commit/6e05c6f21b34>`__ |
| 3044 | libstb/(create\|print)-container: Sync with sb-signing-utils \* |
| 3045 | `1ddf7e51936f <https://github.com/open-power/skiboot/commit/1ddf7e51936f>`__ |
| 3046 | Mambo: run hello\_world and sreset\_world tests with Secure and Trusted |
| 3047 | Boot \* |
| 3048 | `8c762d5359d6 <https://github.com/open-power/skiboot/commit/8c762d5359d6>`__ |
| 3049 | allow secure boot if not enforcing it \* |
| 3050 | `f23d6c626bd6 <https://github.com/open-power/skiboot/commit/f23d6c626bd6>`__ |
| 3051 | libflash/mbox-flash: fallback to requesting lower MBOX versions from BMC |
| 3052 | \* |
| 3053 | `8514d755c3ad <https://github.com/open-power/skiboot/commit/8514d755c3ad>`__ |
| 3054 | skiboot 5.9.7 release notes \* |
| 3055 | `80838c3158a8 <https://github.com/open-power/skiboot/commit/80838c3158a8>`__ |
| 3056 | SLW: fix running in mambo \* |
| 3057 | `43eb8bbcbaa5 <https://github.com/open-power/skiboot/commit/43eb8bbcbaa5>`__ |
| 3058 | libstb/cvc: Register P8 secure ROM code correctly \* |
| 3059 | `28b94285ba3a <https://github.com/open-power/skiboot/commit/28b94285ba3a>`__ |
| 3060 | Revert "libpore: Fix incorrect mtspr instruction generation" \* |
| 3061 | `9b7289511d7e <https://github.com/open-power/skiboot/commit/9b7289511d7e>`__ |
| 3062 | skiboot v5.10-rc1 release notes \* |
| 3063 | `5cb93cd26e19 <https://github.com/open-power/skiboot/commit/5cb93cd26e19>`__ |
| 3064 | stb: Correctly error out when no PCR for resource \* |
| 3065 | `fd5d3fea1e54 <https://github.com/open-power/skiboot/commit/fd5d3fea1e54>`__ |
| 3066 | stb: Enforce secure boot if called before libstb initialized \* |
| 3067 | `782b91a5b85a <https://github.com/open-power/skiboot/commit/782b91a5b85a>`__ |
| 3068 | skiboot 5.10-rc2 release notes \* |
| 3069 | `b94fbeaf137c <https://github.com/open-power/skiboot/commit/b94fbeaf137c>`__ |
| 3070 | stb: Put correct label (for skiboot) into container \* |
| 3071 | `6d965ea72ad8 <https://github.com/open-power/skiboot/commit/6d965ea72ad8>`__ |
| 3072 | pflash: Fix makefile dependency issue \* |
| 3073 | `1d7da2e9b05b <https://github.com/open-power/skiboot/commit/1d7da2e9b05b>`__ |
| 3074 | skiboot v5.10-rc3 release notes \* |
| 3075 | `9b67f73a5947 <https://github.com/open-power/skiboot/commit/9b67f73a5947>`__ |
| 3076 | cpu\_wait\_job: Correctly report time spent waiting for job \* |
| 3077 | `03e90a0629bd <https://github.com/open-power/skiboot/commit/03e90a0629bd>`__ |
| 3078 | Add -debug to version on DEBUG builds \* |
| 3079 | `00eaf79e5da9 <https://github.com/open-power/skiboot/commit/00eaf79e5da9>`__ |
| 3080 | increase log verbosity in debug builds \* |
| 3081 | `4c6539c13504 <https://github.com/open-power/skiboot/commit/4c6539c13504>`__ |
| 3082 | npu2/opal-api: move npu2 checkstop defines to npu2-regs.h \* |
| 3083 | `e6272787ed96 <https://github.com/open-power/skiboot/commit/e6272787ed96>`__ |
| 3084 | opal-api: Re-jig OPAL API numbers because OpenCAPI kernel merge \* |
| 3085 | `4769f3932c0b <https://github.com/open-power/skiboot/commit/4769f3932c0b>`__ |
| 3086 | skiboot 5.10-rc4 release notes \* |
| 3087 | `62a0b2e470e8 <https://github.com/open-power/skiboot/commit/62a0b2e470e8>`__ |
| 3088 | skiboot v5.10 release notes \* |
| 3089 | `49c175d9a026 <https://github.com/open-power/skiboot/commit/49c175d9a026>`__ |
| 3090 | doc: fix v5.10-rc4 release date |
| 3091 | |
| 3092 | Sukadev Bhattiprolu (1): \* |
| 3093 | `31e5e988632f <https://github.com/open-power/skiboot/commit/31e5e988632f>`__ |
| 3094 | vas: Disable VAS/NX-842 on some P9 revisions |
| 3095 | |
| 3096 | Suraj Jitindar Singh (1): \* |
| 3097 | `535d86ee9893 <https://github.com/open-power/skiboot/commit/535d86ee9893>`__ |
| 3098 | external/pflash: Fix non-zero return code for successful read when |
| 3099 | size%256 != 0 |
| 3100 | |
| 3101 | Vaibhav Jain (5): \* |
| 3102 | `646dbfbec287 <https://github.com/open-power/skiboot/commit/646dbfbec287>`__ |
| 3103 | make\_version: Fix check for '.version' file \* |
| 3104 | `7b613693d537 <https://github.com/open-power/skiboot/commit/7b613693d537>`__ |
| 3105 | phb4: Dump CAPP error registers when it asserts link down \* |
| 3106 | `e05798d87571 <https://github.com/open-power/skiboot/commit/e05798d87571>`__ |
| 3107 | capi: Perform capp recovery sequence only when PBCQ is idle \* |
| 3108 | `5a959af3fb41 <https://github.com/open-power/skiboot/commit/5a959af3fb41>`__ |
| 3109 | capi: Disable CAPP virtual machines \* |
| 3110 | `328af10e1c11 <https://github.com/open-power/skiboot/commit/328af10e1c11>`__ |
| 3111 | capi: Enable channel tag streaming for PHB in CAPP mode |
| 3112 | |
| 3113 | Vasant Hegde (10): \* |
| 3114 | `eb858339cae8 <https://github.com/open-power/skiboot/commit/eb858339cae8>`__ |
| 3115 | hdata: Rename 'fsp-ipl-side' as 'sp-ipl-side' \* |
| 3116 | `eaf9e0f0981b <https://github.com/open-power/skiboot/commit/eaf9e0f0981b>`__ |
| 3117 | hdata: Add location code property to xscom node \* |
| 3118 | `9088e400d319 <https://github.com/open-power/skiboot/commit/9088e400d319>`__ |
| 3119 | prd: Add generic response structure inside prd\_fw\_msg \* |
| 3120 | `5d847a1b9d49 <https://github.com/open-power/skiboot/commit/5d847a1b9d49>`__ |
| 3121 | prd: Enable error logging via firmware\_request interface \* |
| 3122 | `0f9a776aa72f <https://github.com/open-power/skiboot/commit/0f9a776aa72f>`__ |
| 3123 | prd: Log unsupported message type \* |
| 3124 | `5110b54067c0 <https://github.com/open-power/skiboot/commit/5110b54067c0>`__ |
| 3125 | hdata: Add memory hierarchy under xscom node \* |
| 3126 | `c0840ae7330f <https://github.com/open-power/skiboot/commit/c0840ae7330f>`__ |
| 3127 | hdata: Parse SPD data \* |
| 3128 | `4a12d6deb045 <https://github.com/open-power/skiboot/commit/4a12d6deb045>`__ |
| 3129 | hdata/vpd: Add vendor property \* |
| 3130 | `85f55e36bbd2 <https://github.com/open-power/skiboot/commit/85f55e36bbd2>`__ |
| 3131 | ATTN: Enable flush instruction cache bit in HID register \* |
| 3132 | `44d352ed6bd0 <https://github.com/open-power/skiboot/commit/44d352ed6bd0>`__ |
| 3133 | DT: Add "version" property under ibm, firmware-versions node |
| 3134 | |
| 3135 | Package: witherspoon-xml |
| 3136 | ------------------------ |
| 3137 | |
| 3138 | `Repository <https://github.com/open-power/witherspoon-xml>`__ |
| 3139 | |
| 3140 | Patches |
| 3141 | ~~~~~~~ |
| 3142 | |
| 3143 | Commits |
| 3144 | ~~~~~~~ |
| 3145 | |
| 3146 | Bill Hoffa (1): \* |
| 3147 | `5806543c0adb <https://github.com/open-power/witherspoon-xml/commit/5806543c0adb>`__ |
| 3148 | Stabilize DD2.1 by disabling some stop states and disable VDM + WOF |
| 3149 | |
| 3150 | Erich Hauptli (9): \* |
| 3151 | `882ef2310daa <https://github.com/open-power/witherspoon-xml/commit/882ef2310daa>`__ |
| 3152 | Updating MEMD VPD \* |
| 3153 | `f0ef411a263c <https://github.com/open-power/witherspoon-xml/commit/f0ef411a263c>`__ |
| 3154 | Adding in additional WOF table \* |
| 3155 | `32bfab156076 <https://github.com/open-power/witherspoon-xml/commit/32bfab156076>`__ |
| 3156 | Adding OPEN\_POWER\_N\_PLUS\_ONE\_HPC\_BULK\_POWER\_LIMIT\_WATTS \* |
| 3157 | `97e83826bb31 <https://github.com/open-power/witherspoon-xml/commit/97e83826bb31>`__ |
| 3158 | Updating Ref Clock and Gen 3 Eq Settings \* |
| 3159 | `b81b843c9452 <https://github.com/open-power/witherspoon-xml/commit/b81b843c9452>`__ |
| 3160 | Fixing enumerator \* |
| 3161 | `43746576272c <https://github.com/open-power/witherspoon-xml/commit/43746576272c>`__ |
| 3162 | Fixing VRM\_VDD\_TEMP sensor \* |
| 3163 | `5044f59f7de0 <https://github.com/open-power/witherspoon-xml/commit/5044f59f7de0>`__ |
| 3164 | Re-enabling Stop States, WOF, and VDM \* |
| 3165 | `4629ea3fff85 <https://github.com/open-power/witherspoon-xml/commit/4629ea3fff85>`__ |
| 3166 | Updating WOF Data \* |
| 3167 | `58554bfabd7f <https://github.com/open-power/witherspoon-xml/commit/58554bfabd7f>`__ |
| 3168 | Adding in default OBUS Brick Lane Masks |
| 3169 | |
| 3170 | Matt Spinler (1): \* |
| 3171 | `bee9ba7e53e6 <https://github.com/open-power/witherspoon-xml/commit/bee9ba7e53e6>`__ |
| 3172 | Add power button LED |
| 3173 | |
| 3174 | nschwart (3): \* |
| 3175 | `5e6ff0b9c1fb <https://github.com/open-power/witherspoon-xml/commit/5e6ff0b9c1fb>`__ |
| 3176 | Pcie slot numbers - SW406686 (#72) \* |
| 3177 | `87b0173c563d <https://github.com/open-power/witherspoon-xml/commit/87b0173c563d>`__ |
| 3178 | VRM temp sensor, hb\_volatile\_sensor, 128GB DIMM throttling update |
| 3179 | (#73) \* |
| 3180 | `d647013c46bd <https://github.com/open-power/witherspoon-xml/commit/d647013c46bd>`__ |
| 3181 | Dimm mapping fixes (#76) |
| 3182 | |
| 3183 | Package: zaius-xml |
| 3184 | ------------------ |
| 3185 | |
| 3186 | `Repository <https://github.com/open-power/zaius-xml>`__ |
| 3187 | |
| 3188 | Patches |
| 3189 | ~~~~~~~ |
| 3190 | |
| 3191 | Commits |
| 3192 | ~~~~~~~ |
| 3193 | |
| 3194 | Adrian Barrera (6): \* |
| 3195 | `0c28b11c0ace <https://github.com/open-power/zaius-xml/commit/0c28b11c0ace>`__ |
| 3196 | Add MEMD VPD \* |
| 3197 | `338671f00ca8 <https://github.com/open-power/zaius-xml/commit/338671f00ca8>`__ |
| 3198 | Update default PCIe G3 lane Eq \* |
| 3199 | `117366697547 <https://github.com/open-power/zaius-xml/commit/117366697547>`__ |
| 3200 | Move 25G-OC clock select to IO filter PLL \* |
| 3201 | `c254d1ecc0d7 <https://github.com/open-power/zaius-xml/commit/c254d1ecc0d7>`__ |
| 3202 | Add 23c 225W WOF Table \* |
| 3203 | `828711d20ff5 <https://github.com/open-power/zaius-xml/commit/828711d20ff5>`__ |
| 3204 | Update refclock freq to fix WOF table offset \* |
| 3205 | `b0884b3032df <https://github.com/open-power/zaius-xml/commit/b0884b3032df>`__ |
| 3206 | New attribute to enable Early Data scoms |