| #!/bin/bash |
| |
| powerState=$(i2cget -f -y 0x2 0x4f 0xe0 b) |
| |
| getGPISourceRegisters(){ |
| REG60=$(i2cget -f -y 0x2 0x4f 0x60 w) # GPI Data Set |
| REG61=$(i2cget -f -y 0x2 0x4f 0x61 w) # GPI DATA Set #0 |
| REG62=$(i2cget -f -y 0x2 0x4f 0x62 w) # GPI DATA Set #1 |
| REG63=$(i2cget -f -y 0x2 0x4f 0x63 w) # GPI DATA Set #2 |
| REG64=$(i2cget -f -y 0x2 0x4f 0x64 w) # GPI DATA Set #3 |
| DS0Pres=$((REG60 & 0x0100)) |
| DS1Pres=$((REG60 & 0x0200)) |
| DS2Pres=$((REG60 & 0x0400)) |
| DS3Pres=$((REG60 & 0x0800)) |
| } |
| |
| getErrorCount() { |
| MemCE=$(i2cget -f -y 0x2 0x4f 0x90 w) |
| MemUE=$(i2cget -f -y 0x2 0x4f 0x93 w) |
| CoreCE=$(i2cget -f -y 0x2 0x4f 0x80 w) |
| CoreUE=$(i2cget -f -y 0x2 0x4f 0x83 w) |
| PCIeCE=$(i2cget -f -y 0x2 0x4f 0xc0 w) |
| PCIeUE=$(i2cget -f -y 0x2 0x4f 0xc2 w) |
| OtherCE=$(i2cget -f -y 0x2 0x4f 0xd0 w) |
| OtherUE=$(i2cget -f -y 0x2 0x4f 0xd8 w) |
| } |
| |
| getReg61Vals() { |
| REG61_0800=$((REG61 & 0x0800)) |
| REG61_0800_VAL=$((REG61_0800 >> 8)) |
| REG61_1000=$((REG61 & 0x1000)) |
| REG61_1000_VAL=$((REG61_1000 >> 12)) |
| } |
| |
| getReg62Vals() { |
| REG62_0100=$((REG62 & 0x0100)) |
| REG62_0100_VAL=$((REG62_0100 >> 8)) |
| REG62_0200=$((REG62 & 0x0200)) |
| REG62_0200_VAL=$((REG62_0200 >> 9)) |
| REG62_0400=$((REG62 & 0x0400)) |
| REG62_0400_VAL=$((REG62_0400 >> 10)) |
| } |
| |
| getReg63Vals() { |
| REG63_0100=$((REG63 & 0x0100)) |
| REG63_0100_VAL=$((REG63_0100 >> 8)) |
| } |
| |
| getReg64Vals() { |
| REG64_0100=$((REG64 & 0x0100)) |
| REG64_0100_VAL=$((REG64_0100 >> 8)) |
| REG64_0200=$((REG64 & 0x0200)) |
| REG64_0200_VAL=$((REG64_0200 >> 9)) |
| REG64_0800=$((REG64 & 0x0800)) |
| REG64_0800_VAL=$((REG64_0800 >> 11)) |
| REG64_2000=$((REG64 & 0x2000)) |
| REG64_2000_VAL=$((REG64_2000 >> 13)) |
| REG64_4000=$((REG64 & 0x4000)) |
| REG64_4000_VAL=$((REG64_4000 >> 14)) |
| REG64_8000=$((REG64 & 0x8000)) |
| REG64_8000_VAL=$((REG64_8000 >> 15)) |
| REG64_0001=$((REG64 & 0x0001)) |
| REG64_0001_VAL=$((REG64_0001)) |
| } |
| |
| getGPIStatusRegisters(){ |
| REG70=$(i2cget -f -y 0x2 0x4f 0x70 w) # Core, DIMM, SLC, PCIe, and Other errors |
| REG78=$(i2cget -f -y 0x2 0x4f 0x78 w) # VRD Fault/Warning Error |
| REG79=$(i2cget -f -y 0x2 0x4f 0x79 w) # VRD Hot |
| REG7A=$(i2cget -f -y 0x2 0x4f 0x7A w) # DIMM Hot Error |
| REG7B=$(i2cget -f -y 0x2 0x4f 0x7B w) # Boot #1 Error |
| REG7C=$(i2cget -f -y 0x2 0x4f 0x7C w) # Boot #2 Error |
| REG7D=$(i2cget -f -y 0x2 0x4f 0x7D w) # Watchdog/Other Status |
| REG7E=$(i2cget -f -y 0x2 0x4f 0x7E w) # RAS internal error |
| } |
| |
| getReg70Vals() { |
| REG70_0100=$((REG70 & 0x0100)) |
| REG70_0100_VAL=$((REG70_0100 >> 8)) |
| REG70_0200=$((REG70 & 0x0200)) |
| REG70_0200_VAL=$((REG70_0200 >> 9)) |
| REG70_0400=$((REG70 & 0x0400)) |
| REG70_0400_VAL=$((REG70_0400 >> 10)) |
| REG70_0800=$((REG70 & 0x0800)) |
| REG70_0800_VAL=$((REG70_0800 >> 11)) |
| REG70_4000=$((REG70 & 0x4000)) |
| REG70_4000_VAL=$((REG70_4000 >> 14)) |
| REG70_8000=$((REG70 & 0x8000)) |
| REG70_8000_VAL=$((REG70_8000 >> 15)) |
| REG70_0001=$((REG70 & 0x0001)) |
| REG70_0001_VAL=$((REG70_0001)) |
| REG70_0002=$((REG70 & 0x0002)) |
| REG70_0002_VAL=$((REG70_0002 >> 1)) |
| } |
| |
| getReg78Vals() { |
| REG78_0100=$((REG78 & 0x0100)) |
| REG78_0100_VAL=$((REG78_0100 >> 8)) |
| REG78_0200=$((REG78 & 0x0200)) |
| REG78_0200_VAL=$((REG78_0200 >> 9)) |
| REG78_0400=$((REG78 & 0x0400)) |
| REG78_0400_VAL=$((REG78_0400 >> 10)) |
| REG78_0800=$((REG78 & 0x0800)) |
| REG78_0800_VAL=$((REG78_0800 >> 11)) |
| REG78_1000=$((REG78 & 0x1000)) |
| REG78_1000_VAL=$((REG78_1000 >> 12)) |
| REG78_2000=$((REG78 & 0x2000)) |
| REG78_2000_VAL=$((REG78_2000 >> 13)) |
| REG78_4000=$((REG78 & 0x4000)) |
| REG78_4000_VAL=$((REG78_4000 >> 14)) |
| REG78_8000=$((REG78 & 0x8000)) |
| REG78_8000_VAL=$((REG78_8000 >> 15)) |
| REG78_0001=$((REG78 & 0x0001)) |
| REG78_0001_VAL=$((REG78_0001)) |
| REG78_0002=$((REG78 & 0x0002)) |
| REG78_0002_VAL=$((REG78_0002 >> 1)) |
| REG78_0004=$((REG78 & 0x0004)) |
| REG78_0004_VAL=$((REG78_0004 >> 2)) |
| REG78_0008=$((REG78 & 0x0008)) |
| REG78_0008_VAL=$((REG78_0008 >> 3)) |
| } |
| |
| getReg79Vals() { |
| REG79_0100=$((REG79 & 0x0100)) |
| REG79_0100_VAL=$((REG79_0100 >> 8)) |
| REG79_1000=$((REG79 & 0x1000)) |
| REG79_1000_VAL=$((REG79_1000 >> 12)) |
| REG79_2000=$((REG79 & 0x2000)) |
| REG79_2000_VAL=$((REG79_2000 >> 13)) |
| REG79_4000=$((REG79 & 0x4000)) |
| REG79_4000_VAL=$((REG79_4000 >> 14)) |
| REG79_0001=$((REG79 & 0x0001)) |
| REG79_0001_VAL=$((REG79_0001)) |
| REG79_0002=$((REG79 & 0x0002)) |
| REG79_0002_VAL=$((REG79_0002 >> 1)) |
| REG79_0004=$((REG79 & 0x0004)) |
| REG79_0004_VAL=$((REG79_0004 >> 2)) |
| REG79_0008=$((REG79 & 0x0008)) |
| REG79_0008_VAL=$((REG79_0008 >> 3)) |
| } |
| |
| getReg7AVals() { |
| REG7A_0100=$((REG7A & 0x0100)) |
| REG7A_0100_VAL=$((REG7A_0100 >> 8)) |
| REG7A_0200=$((REG7A & 0x0200)) |
| REG7A_0200_VAL=$((REG7A_0200 >> 9)) |
| REG7A_0400=$((REG7A & 0x0400)) |
| REG7A_0400_VAL=$((REG7A_0400 >> 10)) |
| REG7A_0800=$((REG7A & 0x0800)) |
| REG7A_0800_VAL=$((REG7A_0800 >> 11)) |
| REG7A_1000=$((REG7A & 0x1000)) |
| REG7A_1000_VAL=$((REG7A_1000 >> 12)) |
| REG7A_2000=$((REG7A & 0x2000)) |
| REG7A_2000_VAL=$((REG7A_2000 >> 13)) |
| REG7A_4000=$((REG7A & 0x4000)) |
| REG7A_4000_VAL=$((REG7A_4000 >> 14)) |
| REG7A_8000=$((REG7A & 0x8000)) |
| REG7A_8000_VAL=$((REG7A_8000 >> 15)) |
| } |
| |
| getReg7DVals() { |
| REG7D_0100=$((REG7D & 0x0100)) |
| REG7D_0100_VAL=$((REG7D_0100 >> 8)) |
| REG7D_0200=$((REG7D & 0x0200)) |
| REG7D_0200_VAL=$((REG7D_0200 >> 9)) |
| REG7D_0400=$((REG7D & 0x0400)) |
| REG7D_0400_VAL=$((REG7D_0400 >> 10)) |
| } |
| |
| getReg7EVals() { |
| REG7E_0100=$((REG7E & 0x0100)) |
| REG7E_0100_VAL=$((REG7E_0100 >> 8)) |
| REG7E_0200=$((REG7E & 0x0200)) |
| REG7E_0200_VAL=$((REG7E_0200 >> 9)) |
| } |
| |
| getGPIMaskRegisters(){ |
| REG50=$(i2cget -f -y 0x2 0x4f 0x50 w) # GPI Control #0 |
| REG51=$(i2cget -f -y 0x2 0x4f 0x51 w) # GPI Control #1 |
| REG52=$(i2cget -f -y 0x2 0x4f 0x52 w) # GPI Control #2 |
| REG53=$(i2cget -f -y 0x2 0x4f 0x53 w) # GPI Control #3 |
| REG54=$(i2cget -f -y 0x2 0x4f 0x54 w) # GPI CE/UE Mask |
| } |
| |
| getReg50Vals() { |
| REG50_0400=$((REG50 & 0x0400)) |
| REG50_0400_VAL=$((REG50_0400 >> 10)) |
| REG50_0800=$((REG50 & 0x0800)) |
| REG50_0800_VAL=$((REG50_0800 >> 11)) |
| } |
| |
| getReg51Vals() { |
| REG51_0100=$((REG51 & 0x0100)) |
| REG51_0100_VAL=$((REG51_0100 >> 8)) |
| REG51_0200=$((REG51 & 0x0200)) |
| REG51_0200_VAL=$((REG51_0200 >> 9)) |
| REG51_0400=$((REG51 & 0x0400)) |
| REG51_0400_VAL=$((REG51_0400 >> 10)) |
| } |
| |
| getReg52Vals() { |
| REG52_0100=$((REG52 & 0x0100)) |
| REG52_0100_VAL=$((REG52_0100 >> 8)) |
| } |
| |
| getReg53Vals() { |
| REG53_0100=$((REG53 & 0x0100)) |
| REG53_0100_VAL=$((REG53_0100 >> 8)) |
| REG53_0200=$((REG53 & 0x0200)) |
| REG53_0200_VAL=$((REG53_0200 >> 9)) |
| REG53_0800=$((REG53 & 0x0800)) |
| REG53_0800_VAL=$((REG53_0800 >> 11)) |
| REG53_2000=$((REG53 & 0x2000)) |
| REG53_2000_VAL=$((REG53_2000 >> 13)) |
| REG53_4000=$((REG53 & 0x4000)) |
| REG53_4000_VAL=$((REG53_4000 >> 14)) |
| REG53_8000=$((REG53 & 0x8000)) |
| REG53_8000_VAL=$((REG53_8000 >> 15)) |
| REG53_0001=$((REG53 & 0x0001)) |
| REG53_0001_VAL=$((REG53_0001)) |
| } |
| |
| getReg54Vals() { |
| REG54_0100=$((REG54 & 0x0100)) |
| REG54_0100_VAL=$((REG54_0100 >> 8)) |
| REG54_0200=$((REG54 & 0x0200)) |
| REG54_0200_VAL=$((REG54_0200 >> 9)) |
| REG54_0001=$((REG54 & 0x0001)) |
| REG54_0001_VAL=$((REG54_0001)) |
| REG54_0002=$((REG54 & 0x0002)) |
| REG54_0002_VAL=$((REG54_0002 >> 1)) |
| REG54_0004=$((REG54 & 0x0004)) |
| REG54_0004_VAL=$((REG54_0004 >> 2)) |
| REG54_0008=$((REG54 & 0x0008)) |
| REG54_0008_VAL=$((REG54_0008 >> 3)) |
| REG54_0010=$((REG54 & 0x0010)) |
| REG54_0010_VAL=$((REG54_0010 >> 4)) |
| REG54_0020=$((REG54 & 0x0020)) |
| REG54_0020_VAL=$((REG54_0020 >> 5)) |
| } |
| |
| |
| |
| if [ -z "${powerState}" ] |
| then |
| echo "System is currently Powered off S6" |
| else |
| echo "System is currently in ${powerState} " |
| |
| # Get Error Count |
| getErrorCount |
| echo " " |
| echo " Error Count: " |
| echo " Memory Errors: Correctable $((MemCE >> 8)) Uncorrectable $((MemUE >> 8)) " |
| echo " Core Errors: Correctable $((CoreCE >> 8)) Uncorrectable $((CoreUE >> 8))" |
| echo " PCIe Errors: Correctable $((PCIeCE >> 8)) Uncorrectable $((PCIeUE >> 8)) " |
| echo " Other Errors: Correctable $((OtherCE >> 8)) Uncorrectable $((OtherUE >> 8)) " |
| |
| # GPI Source Registers |
| getGPISourceRegisters |
| echo " " |
| echo " GPI Source Registers: " |
| echo " GPI Data Set #0 Present: $((DS0Pres >> 8)) " |
| echo " GPI Data Set #1 Present: $((DS1Pres >> 9)) " |
| echo " GPI Data Set #2 Present: $((DS2Pres >> 10)) " |
| echo " GPI Data Set #3 Present: $((DS3Pres >> 11)) " |
| |
| # REG61 Data Set#0 |
| getReg61Vals |
| echo " " |
| echo " GPI Data Set#0: " |
| if [[ "$REG61_0800_VAL" != 0 ]]; then |
| echo " Platform Booting " |
| fi |
| if [[ "$REG61_1000_VAL" != 0 ]]; then |
| echo " Critical Stop " |
| fi |
| |
| # REG62 Data Set#1 |
| getReg62Vals |
| echo " " |
| echo " GPI Data Set#1: " |
| if [[ "$REG62_0100_VAL" != 0 ]]; then |
| echo " SoC VR HOT/Warn/Fault " |
| fi |
| if [[ "$REG62_0200_VAL" != 0 ]]; then |
| echo " Core VR HOT/Warn/Fault " |
| fi |
| if [[ "$REG62_0400_VAL" != 0 ]]; then |
| echo " DIMM HOT/Warn/Fault " |
| fi |
| |
| # REG63 Data Set#2 |
| getReg63Vals |
| echo " " |
| echo " GPI Data Set#2: " |
| if [[ "$REG63_0100_VAL" != 0 ]]; then |
| echo " DIMM HOT " |
| fi |
| |
| # REG64 Data Set#3 |
| getReg64Vals |
| echo " " |
| echo " GPI Data Set#3: " |
| if [[ "$REG64_0100_VAL" != 0 ]]; then |
| echo " Core Errors " |
| fi |
| if [[ "$REG64_0200_VAL" != 0 ]]; then |
| echo " Memory Errors " |
| fi |
| if [[ "$REG64_0800_VAL" != 0 ]]; then |
| echo " PCIe Errors " |
| fi |
| if [[ "$REG64_2000_VAL" != 0 ]]; then |
| echo " Other Errors " |
| fi |
| if [[ "$REG64_4000_VAL" != 0 ]]; then |
| echo " ACPI State Change " |
| fi |
| if [[ "$REG64_8000_VAL" != 0 ]]; then |
| echo " Boot Errors " |
| fi |
| if [[ "$REG64_0001_VAL" != 0 ]]; then |
| echo " RAS Internal Error " |
| fi |
| |
| # GPI Status Regs |
| getGPIStatusRegisters |
| echo " " |
| echo " GPI Status Regs " |
| |
| getReg70Vals |
| echo " " |
| echo " Core, DIMM, SLC, PCIe, and Other errors: " |
| if [[ "$REG70_0100_VAL" != 0 ]]; then |
| echo " Core CE Error " |
| fi |
| if [[ "$REG70_0200_VAL" != 0 ]]; then |
| echo " Core UE Error " |
| fi |
| if [[ "$REG70_0400_VAL" != 0 ]]; then |
| echo " DIMM CE Error " |
| fi |
| if [[ "$REG70_0800_VAL" != 0 ]]; then |
| echo " DIMM UE Error " |
| fi |
| if [[ "$REG70_4000_VAL" != 0 ]]; then |
| echo " PCIe CE Error " |
| fi |
| if [[ "$REG70_8000_VAL" != 0 ]]; then |
| echo " PCIe UE Error " |
| fi |
| if [[ "$REG70_0001_VAL" != 0 ]]; then |
| echo " Other CE Error " |
| fi |
| if [[ "$REG70_0002_VAL" != 0 ]]; then |
| echo " Other UE Error " |
| fi |
| |
| getReg78Vals |
| echo " " |
| echo " VRD Fault/Warning Error: " |
| if [[ "$REG78_0100_VAL" != 0 ]]; then |
| echo " SoC VRD fault/warning " |
| fi |
| if [[ "$REG78_0200_VAL" != 0 ]]; then |
| echo " Core VRD1 fault/warning " |
| fi |
| if [[ "$REG78_0400_VAL" != 0 ]]; then |
| echo " Core VRD2 fault/warning " |
| fi |
| if [[ "$REG78_0800_VAL" != 0 ]]; then |
| echo " Core VRD3 fault/warning " |
| fi |
| if [[ "$REG78_1000_VAL" != 0 ]]; then |
| echo " DIMM VRD1 fault/warning " |
| fi |
| if [[ "$REG78_2000_VAL" != 0 ]]; then |
| echo " DIMM VRD2 fault/warning " |
| fi |
| if [[ "$REG78_4000_VAL" != 0 ]]; then |
| echo " DIMM VRD3 fault/warning " |
| fi |
| if [[ "$REG78_8000_VAL" != 0 ]]; then |
| echo " DIMM VRD3 fault/warning " |
| fi |
| if [[ "$REG78_0001_VAL" != 0 ]]; then |
| echo " DIMM fault/warning " |
| fi |
| if [[ "$REG78_0002_VAL" != 0 ]]; then |
| echo " DIMM fault/warning " |
| fi |
| if [[ "$REG78_0004_VAL" != 0 ]]; then |
| echo " DIMM fault/warning " |
| fi |
| if [[ "$REG78_0008_VAL" != 0 ]]; then |
| echo " DIMM fault/warning " |
| fi |
| |
| getReg79Vals |
| echo " " |
| echo " VRD Hot: " |
| if [[ "$REG79_0100_VAL" != 0 ]]; then |
| echo " SoC VRD is HOT " |
| fi |
| if [[ "$REG79_1000_VAL" != 0 ]]; then |
| echo " Core VRD1 is HOT " |
| fi |
| if [[ "$REG79_2000_VAL" != 0 ]]; then |
| echo " Core VRD2 is HOT " |
| fi |
| if [[ "$REG79_4000_VAL" != 0 ]]; then |
| echo " Core VRD3 is HOT " |
| fi |
| if [[ "$REG79_0001_VAL" != 0 ]]; then |
| echo " DIMM VRD1 is HOT " |
| fi |
| if [[ "$REG79_0002_VAL" != 0 ]]; then |
| echo " DIMM VRD2 is HOT " |
| fi |
| if [[ "$REG79_0004_VAL" != 0 ]]; then |
| echo " DIMM VRD3 is HOT " |
| fi |
| if [[ "$REG79_0008_VAL" != 0 ]]; then |
| echo " DIMM VRD4 is HOT " |
| fi |
| |
| getReg7AVals |
| echo " " |
| echo " DIMM Hot Error: " |
| if [[ "$REG7A_0100_VAL" != 0 ]]; then |
| echo " DIMM channel 0 is HOT " |
| fi |
| if [[ "$REG7A_0200_VAL" != 0 ]]; then |
| echo " DIMM channel 1 is HOT " |
| fi |
| if [[ "$REG7A_0400_VAL" != 0 ]]; then |
| echo " DIMM channel 2 is HOT " |
| fi |
| if [[ "$REG7A_0800_VAL" != 0 ]]; then |
| echo " DIMM channel 3 is HOT " |
| fi |
| if [[ "$REG7A_1000_VAL" != 0 ]]; then |
| echo " DIMM channel 4 is HOT " |
| fi |
| if [[ "$REG7A_2000_VAL" != 0 ]]; then |
| echo " DIMM channel 5 is HOT " |
| fi |
| if [[ "$REG7A_4000_VAL" != 0 ]]; then |
| echo " DIMM channel 6 is HOT " |
| fi |
| if [[ "$REG7A_8000_VAL" != 0 ]]; then |
| echo " DIMM channel 7 is HOT " |
| fi |
| |
| echo " " |
| echo " Boot #1 Error: $((REG7B >> 8)) " |
| echo " Boot #2 Error: $((REG7C >> 8)) " |
| |
| |
| getReg7DVals |
| echo " " |
| echo " Watchdog/Other Status: " |
| if [[ "$REG7D_0100_VAL" != 0 ]]; then |
| echo " Non-secure WDT expired " |
| fi |
| if [[ "$REG7D_0200_VAL" != 0 ]]; then |
| echo " Secure WDT expired " |
| fi |
| if [[ "$REG7D_0400_VAL" != 0 ]]; then |
| echo " Firmware WDT expired " |
| fi |
| |
| getReg7EVals |
| echo " " |
| echo " RAS internal error: " |
| if [[ "$REG7E_0100_VAL" != 0 ]]; then |
| echo " Error from SMpro " |
| fi |
| if [[ "$REG7E_0200_VAL" != 0 ]]; then |
| echo " Error from PMpro " |
| fi |
| |
| # GPI Mask Regs |
| getGPIMaskRegisters |
| echo " " |
| echo " GPI Mask Regs " |
| |
| getReg50Vals |
| echo " " |
| echo " GPI Control #0: " |
| |
| if [[ "$REG50_0400_VAL" != 0 ]]; then |
| echo " Platform Booting " |
| fi |
| if [[ "$REG50_0800_VAL" != 0 ]]; then |
| echo " Critical Stop " |
| fi |
| |
| getReg51Vals |
| echo " " |
| echo " GPI Control #1: " |
| |
| if [[ "$REG51_0100_VAL" != 0 ]]; then |
| echo " SoC VR HOT/Warn/Fault " |
| fi |
| if [[ "$REG51_0200_VAL" != 0 ]]; then |
| echo " Core VR HOT/Warn/Fault " |
| fi |
| if [[ "$REG51_0400_VAL" != 0 ]]; then |
| echo " DIMM VRD HOT/Warn/Fault " |
| fi |
| |
| getReg52Vals |
| echo " " |
| echo " GPI Control #2: " |
| |
| if [[ "$REG52_0100_VAL" != 0 ]]; then |
| echo " DIMM HOT " |
| fi |
| |
| getReg53Vals |
| echo " " |
| echo " GPI Control #3: " |
| if [[ "$REG53_0100_VAL" != 0 ]]; then |
| echo " Core Errors " |
| fi |
| if [[ "$REG53_0200_VAL" != 0 ]]; then |
| echo " Memory Errors " |
| fi |
| if [[ "$REG53_0800_VAL" != 0 ]]; then |
| echo " PCIe Errors " |
| fi |
| if [[ "$REG53_2000_VAL" != 0 ]]; then |
| echo " Other SoC Errors " |
| fi |
| if [[ "$REG53_4000_VAL" != 0 ]]; then |
| echo " ACPI State Change " |
| fi |
| if [[ "$REG53_8000_VAL" != 0 ]]; then |
| echo " Boot Errors " |
| fi |
| if [[ "$REG53_0001_VAL" != 0 ]]; then |
| echo " RAS Internal Error " |
| fi |
| |
| getReg54Vals |
| echo " " |
| echo " GPI CE/UE Mask: " |
| if [[ "$REG54_0100_VAL" != 0 ]]; then |
| echo " Core CE " |
| fi |
| if [[ "$REG54_0200_VAL" != 0 ]]; then |
| echo " Core UE " |
| fi |
| if [[ "$REG54_0001_VAL" != 0 ]]; then |
| echo " DIMM CE " |
| fi |
| if [[ "$REG54_0002_VAL" != 0 ]]; then |
| echo " DIMM UE " |
| fi |
| if [[ "$REG54_0004_VAL" != 0 ]]; then |
| echo " PCIe CE " |
| fi |
| if [[ "$REG54_0008_VAL" != 0 ]]; then |
| echo " PCIe UE " |
| fi |
| if [[ "$REG54_0010_VAL" != 0 ]]; then |
| echo " Other CE " |
| fi |
| if [[ "$REG54_0020_VAL" != 0 ]]; then |
| echo " Other UE " |
| fi |
| |
| fi |