| <!DOCTYPE article PUBLIC "-//OASIS//DTD DocBook XML V4.2//EN" |
| "http://www.oasis-open.org/docbook/xml/4.2/docbookx.dtd" |
| [<!ENTITY % poky SYSTEM "../poky.ent"> %poky; ] > |
| |
| <article id='yocto-project-qs-intro'> |
| <articleinfo> |
| <title>Yocto Project Quick Start</title> |
| |
| <copyright> |
| <year>©RIGHT_YEAR;</year> |
| <holder>Linux Foundation</holder> |
| </copyright> |
| |
| <legalnotice> |
| <para> |
| Permission is granted to copy, distribute and/or modify this document under |
| the terms of the <ulink type="http" url="http://creativecommons.org/licenses/by-sa/2.0/uk/">Creative Commons Attribution-Share Alike 2.0 UK: England & Wales</ulink> as published by Creative Commons. |
| </para> |
| <note> |
| For the latest version of this manual associated with this |
| Yocto Project release, see the |
| <ulink url='&YOCTO_DOCS_QS_URL;'>Yocto Project Quick Start</ulink> |
| from the Yocto Project website. |
| </note> |
| </legalnotice> |
| |
| |
| <abstract> |
| <imagedata fileref="figures/yocto-project-transp.png" |
| width="6in" depth="1in" |
| align="right" scale="25" /> |
| </abstract> |
| </articleinfo> |
| |
| <section id='welcome'> |
| <title>Welcome!</title> |
| <para> |
| Welcome to the Yocto Project! |
| The Yocto Project is an open-source collaboration project whose |
| focus is developers of embedded Linux systems. |
| Among other things, the Yocto Project uses a build host based |
| on the OpenEmbedded (OE) project, which uses the |
| <ulink url='&YOCTO_DOCS_DEV_URL;#bitbake-term'>BitBake</ulink> |
| tool, to construct complete Linux images. |
| The BitBake and OE components are combined together to form |
| a reference build host, historically known as |
| <ulink url='&YOCTO_DOCS_DEV_URL;#poky'>Poky</ulink>. |
| </para> |
| |
| <para> |
| If you do not have a system that runs Linux and you want to give |
| the Yocto Project a test run, you might consider using the Yocto |
| Project Build Appliance. |
| The Build Appliance allows you to build and boot a custom embedded |
| Linux image with the Yocto Project using a non-Linux development |
| system. |
| See the |
| <ulink url='https://www.yoctoproject.org/tools-resources/projects/build-appliance'>Yocto Project Build Appliance</ulink> |
| for more information. |
| </para> |
| |
| <para> |
| This quick start is written so that you can quickly get a host |
| build host set up to use the Yocto Project and then build some |
| Linux images. |
| Rather than go into great detail about the Yocto Project and its |
| many capabilities, this quick start provides the minimal |
| information you need to try out the Yocto Project using a |
| supported Linux build host. |
| Reading and using the quick start should result in you having a |
| basic understanding of what the Yocto Project is and how to use |
| some of its core components. |
| You will also have worked through steps to produce two images: |
| one suitable for emulation and one that can be used on actual |
| hardware. |
| The examples highlight the ease with which you can use the |
| Yocto Project to create images for multiple types of hardware. |
| </para> |
| |
| <para> |
| For more detailed information on the Yocto Project, you can |
| reference these resources: |
| <itemizedlist> |
| <listitem><para><emphasis>Website:</emphasis> |
| The |
| <ulink url='&YOCTO_HOME_URL;'>Yocto Project Website</ulink> |
| provides the latest builds, breaking news, full development |
| documentation, and access to a rich Yocto Project |
| Development Community into which you can tap. |
| </para></listitem> |
| <listitem><para><emphasis>FAQs:</emphasis> |
| Lists commonly asked Yocto Project questions and answers. |
| You can find two FAQs: |
| <ulink url='&YOCTO_WIKI_URL;/wiki/FAQ'>Yocto Project FAQ</ulink> |
| on a wiki, and the |
| "<ulink url='&YOCTO_DOCS_REF_URL;#faq'>FAQ</ulink>" |
| chapter in the Yocto Project Reference Manual. |
| </para></listitem> |
| <listitem><para><emphasis>Developer Screencast:</emphasis> |
| The |
| <ulink url='http://vimeo.com/36450321'>Getting Started with the Yocto Project - New Developer Screencast Tutorial</ulink> |
| provides a 30-minute video created for users unfamiliar |
| with the Yocto Project but familiar with Linux build |
| hosts. |
| While this screencast is somewhat dated, the introductory |
| and fundamental concepts are useful for the beginner. |
| </para></listitem> |
| </itemizedlist> |
| </para> |
| </section> |
| |
| <section id='yp-intro'> |
| <title>Introducing the Yocto Project Development Environment</title> |
| |
| <para> |
| The Yocto Project through the OpenEmbedded build system provides an |
| open source development environment targeting the ARM, MIPS, |
| PowerPC, and x86 architectures for a variety of platforms |
| including x86-64 and emulated ones. |
| You can use components from the Yocto Project to design, develop, |
| build, debug, simulate, and test the complete software stack using |
| Linux, the X Window System, GTK+ frameworks, and Qt frameworks. |
| </para> |
| |
| <mediaobject> |
| <imageobject> |
| <imagedata fileref="figures/yocto-environment.png" |
| format="PNG" align='center' scalefit='1' width="100%"/> |
| </imageobject> |
| <caption> |
| <para>The Yocto Project Development Environment</para> |
| </caption> |
| </mediaobject> |
| |
| <para> |
| Here are some highlights for the Yocto Project: |
| </para> |
| |
| <itemizedlist> |
| <listitem><para> |
| Provides a recent Linux kernel along with a set of system |
| commands and libraries suitable for the embedded |
| environment. |
| </para></listitem> |
| <listitem><para> |
| Makes available system components such as X11, GTK+, Qt, |
| Clutter, and SDL (among others) so you can create a rich user |
| experience on devices that have display hardware. |
| For devices that do not have a display or where you wish to |
| use alternative UI frameworks, these components need not be |
| installed. |
| </para></listitem> |
| <listitem><para> |
| Creates a focused and stable core compatible with the |
| OpenEmbedded project with which you can easily and reliably |
| build and develop. |
| </para></listitem> |
| <listitem><para> |
| Fully supports a wide range of hardware and device emulation |
| through the Quick EMUlator (QEMU). |
| </para></listitem> |
| <listitem><para> |
| Provides a layer mechanism that allows you to easily extend |
| the system, make customizations, and keep them organized. |
| </para></listitem> |
| </itemizedlist> |
| |
| <para> |
| You can use the Yocto Project to generate images for many kinds |
| of devices. |
| As mentioned earlier, the Yocto Project supports creation of |
| reference images that you can boot within and emulate using QEMU. |
| The standard example machines target QEMU full-system |
| emulation for 32-bit and 64-bit variants of x86, ARM, MIPS, and |
| PowerPC architectures. |
| Beyond emulation, you can use the layer mechanism to extend |
| support to just about any platform that Linux can run on and that |
| a toolchain can target. |
| </para> |
| |
| <para> |
| Another Yocto Project feature is the Sato reference User |
| Interface. |
| This optional UI that is based on GTK+ is intended for devices with |
| restricted screen sizes and is included as part of the |
| OpenEmbedded Core layer so that developers can test parts of the |
| software stack. |
| </para> |
| </section> |
| |
| <section id='yp-resources'> |
| <title>Setting Up to Use the Yocto Project</title> |
| |
| <para> |
| The following list shows what you need in order to use a |
| Linux-based build host to use the Yocto Project to build images: |
| </para> |
| |
| <itemizedlist> |
| <listitem><para><emphasis>Build Host</emphasis> |
| A build host with a minimum of 50 Gbytes of free disk |
| space that is running a supported Linux distribution (i.e. |
| recent releases of Fedora, openSUSE, CentOS, Debian, or |
| Ubuntu). |
| </para></listitem> |
| <listitem><para><emphasis>Build Host Packages</emphasis> |
| Appropriate packages installed on the build host. |
| </para></listitem> |
| <listitem><para><emphasis>The Yocto Project</emphasis> |
| A release of the Yocto Project. |
| </para></listitem> |
| </itemizedlist> |
| |
| <section id='the-linux-distro'> |
| <title>The Linux Distribution</title> |
| |
| <para> |
| The Yocto Project team verifies each release against recent |
| versions of the most popular Linux distributions that |
| provide stable releases. |
| In general, if you have the current release minus one of the |
| following distributions, you should have no problems. |
| <itemizedlist> |
| <listitem><para> |
| Ubuntu |
| </para></listitem> |
| <listitem><para> |
| Fedora |
| </para></listitem> |
| <listitem><para> |
| openSUSE |
| </para></listitem> |
| <listitem><para> |
| CentOS |
| </para></listitem> |
| <listitem><para> |
| Debian |
| </para></listitem> |
| </itemizedlist> |
| For a more detailed list of distributions that support the |
| Yocto Project, see the |
| "<ulink url='&YOCTO_DOCS_REF_URL;#detailed-supported-distros'>Supported Linux Distributions</ulink>" |
| section in the Yocto Project Reference Manual. |
| </para> |
| |
| <para> |
| The OpenEmbedded build system should be able to run on any |
| modern distribution that has the following versions for |
| Git, tar, and Python. |
| <itemizedlist> |
| <listitem><para> |
| Git 1.7.8 or greater |
| </para></listitem> |
| <listitem><para> |
| tar 1.24 or greater |
| </para></listitem> |
| <listitem><para> |
| Python 2.7.3 or greater excluding Python |
| 3.x, which is not supported. |
| </para></listitem> |
| </itemizedlist> |
| If your build host does not meet any of these three listed |
| version requirements, you can take steps to prepare the |
| system so that you can still use the Yocto Project. |
| See the |
| "<ulink url='&YOCTO_DOCS_REF_URL;#required-git-tar-and-python-versions'>Required Git, tar, and Python Versions</ulink>" |
| section in the Yocto Project Reference Manual for information. |
| </para> |
| </section> |
| |
| <section id='packages'> |
| <title>The Build Host Packages</title> |
| |
| <para> |
| Required build host packages vary depending on your |
| build machine and what you want to do with the Yocto Project. |
| For example, if you want to build an image that can run |
| on QEMU in graphical mode (a minimal, basic build |
| requirement), then the build host package requirements |
| are different than if you want to build an image on a headless |
| system or build out the Yocto Project documentation set. |
| </para> |
| |
| <para> |
| Collectively, the number of required packages is large |
| if you want to be able to cover all cases. |
| <note> |
| In general, you need to have root access and then install |
| the required packages. |
| Thus, the commands in the following section may or may |
| not work depending on whether or not your Linux |
| distribution has <filename>sudo</filename> installed. |
| </note> |
| </para> |
| |
| <para> |
| The following list shows the required packages needed to build |
| an image that runs on QEMU in graphical mode (e.g. essential |
| plus graphics support). |
| For lists of required packages for other scenarios, see the |
| "<ulink url='&YOCTO_DOCS_REF_URL;#required-packages-for-the-host-development-system'>Required Packages for the Host Development System</ulink>" |
| section in the Yocto Project Reference Manual. |
| <itemizedlist> |
| <listitem><para><emphasis>Ubuntu and Debian</emphasis> |
| <literallayout class='monospaced'> |
| $ sudo apt-get install &UBUNTU_HOST_PACKAGES_ESSENTIAL; libsdl1.2-dev xterm |
| </literallayout> |
| </para></listitem> |
| <listitem><para><emphasis>Fedora</emphasis> |
| <literallayout class='monospaced'> |
| $ sudo dnf install &FEDORA_HOST_PACKAGES_ESSENTIAL; SDL-devel xterm |
| </literallayout> |
| </para></listitem> |
| <listitem><para><emphasis>OpenSUSE</emphasis> |
| <literallayout class='monospaced'> |
| $ sudo zypper install &OPENSUSE_HOST_PACKAGES_ESSENTIAL; libSDL-devel xterm |
| </literallayout> |
| </para></listitem> |
| <listitem><para><emphasis>CentOS</emphasis> |
| <literallayout class='monospaced'> |
| $ sudo yum install &CENTOS_HOST_PACKAGES_ESSENTIAL; SDL-devel xterm |
| </literallayout> |
| <note> |
| CentOS 6.x users need to ensure that the required |
| versions of Git, tar and Python are available. |
| For details, See the |
| "<ulink url='&YOCTO_DOCS_REF_URL;#required-git-tar-and-python-versions'>Required Git, tar, and Python Versions</ulink>" |
| section in the Yocto Project Reference Manual for |
| information. |
| </note> |
| </para></listitem> |
| </itemizedlist> |
| </para> |
| </section> |
| |
| <section id='releases'> |
| <title>Yocto Project Release</title> |
| |
| <para> |
| The last requirement you need to meet before using the |
| Yocto Project is getting a Yocto Project release. |
| It is recommended that you get the latest Yocto Project release |
| by setting up (cloning in |
| <ulink url='&YOCTO_DOCS_DEV_URL;#git'>Git</ulink> terms) a |
| local copy of the <filename>poky</filename> Git repository on |
| your build host and then checking out the latest release. |
| Doing so allows you to easily update to newer Yocto Project |
| releases as well as contribute back to the Yocto Project. |
| </para> |
| |
| <para> |
| Here is an example from an Ubuntu build host that clones the |
| <filename>poky</filename> repository and then checks out the |
| latest Yocto Project Release (i.e. &DISTRO;): |
| <literallayout class='monospaced'> |
| $ git clone git://git.yoctoproject.org/poky |
| Cloning into 'poky'... |
| remote: Counting objects: 226790, done. |
| remote: Compressing objects: 100% (57465/57465), done. |
| remote: Total 226790 (delta 165212), reused 225887 (delta 164327) |
| Receiving objects: 100% (226790/226790), 100.98 MiB | 263 KiB/s, done. |
| Resolving deltas: 100% (165212/165212), done. |
| $ git checkout &DISTRO_NAME; |
| </literallayout> |
| You can also get the Yocto Project Files by downloading |
| Yocto Project releases from the |
| <ulink url="&YOCTO_HOME_URL;">Yocto Project website</ulink>. |
| </para> |
| |
| <para> |
| For more information on getting set up with the Yocto Project |
| release, see the |
| "<ulink url='&YOCTO_DOCS_DEV_URL;#local-yp-release'>Yocto Project Release</ulink>" |
| item in the Yocto Project Development Manual. |
| </para> |
| </section> |
| </section> |
| |
| <section id='qs-building-images'> |
| <title>Building Images</title> |
| |
| <para> |
| Now that you have your system requirements in order, you can give |
| the Yocto Project a try. |
| This section presents steps that let you do the following: |
| <itemizedlist> |
| <listitem><para> |
| Build a <filename>qemux86</filename> reference image |
| and run it in the QEMU emulator. |
| </para></listitem> |
| <listitem><para> |
| Easily change configurations so that you can quickly |
| create a second image, which would be for MinnowBoard |
| MAX-compatible boards. |
| </para></listitem> |
| </itemizedlist> |
| <note> |
| The steps in this section do not provide detail, but rather |
| provide minimal, working commands and examples designed to |
| just get you started. |
| For more details, see the appropriate manuals in the |
| <ulink url='&YOCTO_HOME_URL;/documentation'>Yocto Project manual set</ulink>. |
| </note> |
| </para> |
| |
| <para> |
| Use the following commands to build your image. |
| The OpenEmbedded build system creates an entire Linux |
| distribution, including the toolchain, from source. |
| <note><title>Note about Network Proxies</title> |
| <para> |
| By default, the build process searches for source code |
| using a pre-determined order through a set of |
| locations. |
| If you are working behind a firewall and your build |
| host is not set up for proxies, you could encounter |
| problems with the build process when fetching source |
| code (e.g. fetcher failures or Git failures). |
| </para> |
| |
| <para> |
| If you do not know your proxy settings, consult your |
| local network infrastructure resources and get that |
| information. |
| A good starting point could also be to check your web |
| browser settings. |
| Finally, you can find more information on using the |
| Yocto Project behind a firewall in the Yocto Project |
| Reference Manual |
| <ulink url='&YOCTO_DOCS_REF_URL;#how-does-the-yocto-project-obtain-source-code-and-will-it-work-behind-my-firewall-or-proxy-server'>FAQ</ulink> |
| and on the |
| "<ulink url='https://wiki.yoctoproject.org/wiki/Working_Behind_a_Network_Proxy'>Working Behind a Network Proxy</ulink>" |
| wiki page. |
| </para> |
| </note> |
| </para> |
| |
| <para> |
| <orderedlist> |
| <listitem><para><emphasis>Be Sure Your Build Host is Set Up:</emphasis> |
| The steps to build an image in this section depend on |
| your build host being properly set up. |
| Be sure you have worked through the requirements |
| described in the |
| "<link linkend='yp-resources'>Setting Up to Use the Yocto Project</link>" |
| section. |
| </para></listitem> |
| <listitem><para><emphasis>Check Out Your Branch:</emphasis> |
| Be sure you are in the |
| <ulink url='&YOCTO_DOCS_DEV_URL;#source-directory'>Source Directory</ulink> |
| (e.g. <filename>poky</filename>) and then check out |
| the branch associated with the latest Yocto Project |
| Release: |
| <literallayout class='monospaced'> |
| $ cd ~/poky |
| $ git checkout -b &DISTRO_NAME; origin/&DISTRO_NAME; |
| </literallayout> |
| Git's <filename>checkout</filename> command checks out |
| the current Yocto Project release into a local branch |
| whose name matches the release (i.e. |
| <filename>&DISTRO_NAME;</filename>). |
| The local branch tracks the upstream branch of the |
| same name. |
| Creating your own branch based on the released |
| branch ensures you are using the latest files for |
| that release. |
| </para></listitem> |
| <listitem><para><emphasis>Initialize the Build Environment:</emphasis> |
| Run the |
| <ulink url='&YOCTO_DOCS_REF_URL;#structure-core-script'><filename>&OE_INIT_FILE;</filename></ulink> |
| environment setup script to define the OpenEmbedded |
| build environment on your build host. |
| <literallayout class='monospaced'> |
| $ source &OE_INIT_FILE; |
| </literallayout> |
| Among other things, the script creates the |
| <ulink url='&YOCTO_DOCS_DEV_URL;#build-directory'>Build Directory</ulink>, |
| which is <filename>build</filename> in this case |
| and is located in the |
| <ulink url='&YOCTO_DOCS_DEV_URL;#source-directory'>Source Directory</ulink>. |
| After the script runs, your current working directory |
| is set to the Build Directory. |
| Later, when the build completes, the Build Directory |
| contains all the files created during the build. |
| <note> |
| For information on running a memory-resident |
| <ulink url='&YOCTO_DOCS_REF_URL;#usingpoky-components-bitbake'>BitBake</ulink>, |
| see the |
| <ulink url='&YOCTO_DOCS_REF_URL;#structure-memres-core-script'><filename>oe-init-build-env-memres</filename></ulink> |
| setup script. |
| </note> |
| </para></listitem> |
| <listitem><para><emphasis>Examine Your Local Configuration File:</emphasis> |
| When you set up the build environment, a local |
| configuration file named |
| <filename>local.conf</filename> becomes available in |
| a <filename>conf</filename> subdirectory of the |
| Build Directory. |
| Before using BitBake to start the build, you can |
| look at this file and be sure your general |
| configurations are how you want them: |
| <itemizedlist> |
| <listitem><para> |
| To help conserve disk space during builds, |
| you can add the following statement to your |
| project's configuration file, which for this |
| example is |
| <filename>poky/build/conf/local.conf</filename>. |
| Adding this statement deletes the work |
| directory used for building a recipe once the |
| recipe is built. |
| <literallayout class='monospaced'> |
| INHERIT += "rm_work" |
| </literallayout> |
| </para></listitem> |
| <listitem><para> |
| By default, the target machine for the build is |
| <filename>qemux86</filename>, |
| which produces an image that can be used in |
| the QEMU emulator and is targeted at an |
| <trademark class='registered'>Intel</trademark> |
| 32-bit based architecture. |
| Further on in this example, this default is |
| easily changed through the |
| <ulink url='&YOCTO_DOCS_REF_URL;#var-MACHINE'><filename>MACHINE</filename></ulink> |
| variable so that you can quickly |
| build an image for a different machine. |
| </para></listitem> |
| <listitem><para> |
| Another consideration before you build is the |
| package manager used when creating the image. |
| The default <filename>local.conf</filename> |
| file selects the RPM package manager. |
| You can control this configuration by using the |
| <filename><ulink url='&YOCTO_DOCS_REF_URL;#var-PACKAGE_CLASSES'><filename>PACKAGE_CLASSES</filename></ulink></filename> |
| variable.</para> |
| <para>Selection of the package manager is separate |
| from whether package management is used at runtime |
| in the target image.</para> |
| <para>For additional package manager selection |
| information, see the |
| "<ulink url='&YOCTO_DOCS_REF_URL;#ref-classes-package'><filename>package*.bbclass</filename></ulink>" |
| section in the Yocto Project Reference Manual. |
| </para></listitem> |
| </itemizedlist> |
| </para></listitem> |
| <listitem><para><emphasis>Start the Build:</emphasis> |
| Continue with the following command to build an OS image |
| for the target, which is |
| <filename>core-image-sato</filename> in this example: |
| <note> |
| Depending on the number of processors and cores, the |
| amount of RAM, the speed of your Internet connection |
| and other factors, the build process could take several |
| hours the first time you run it. |
| Subsequent builds run much faster since parts of the |
| build are cached. |
| </note> |
| <literallayout class='monospaced'> |
| $ bitbake core-image-sato |
| </literallayout> |
| For information on using the |
| <filename>bitbake</filename> command, see the |
| "<ulink url='&YOCTO_DOCS_REF_URL;#usingpoky-components-bitbake'>BitBake</ulink>" |
| section in the Yocto Project Reference Manual, or see the |
| "<ulink url='&YOCTO_DOCS_BB_URL;#bitbake-user-manual-command'>BitBake Command</ulink>" |
| section in the BitBake User Manual. |
| For information on other targets, see the |
| "<ulink url='&YOCTO_DOCS_REF_URL;#ref-images'>Images</ulink>" |
| chapter in the Yocto Project Reference Manual. |
| </para></listitem> |
| <listitem><para><emphasis>Simulate Your Image Using QEMU:</emphasis> |
| Once this particular image is built, you can start QEMU |
| and run the image: |
| <literallayout class='monospaced'> |
| $ runqemu qemux86 |
| </literallayout> |
| If you want to learn more about running QEMU, see the |
| "<ulink url="&YOCTO_DOCS_DEV_URL;#dev-manual-qemu">Using the Quick EMUlator (QEMU)</ulink>" |
| chapter in the Yocto Project Development Manual. |
| </para></listitem> |
| <listitem><para><emphasis>Exit QEMU:</emphasis> |
| Exit QEMU by either clicking on the shutdown icon or by |
| opening a terminal, typing |
| <filename>poweroff</filename>, and then pressing "Enter". |
| </para></listitem> |
| </orderedlist> |
| </para> |
| |
| <para> |
| The following steps show how easy it is to set up to build an |
| image for a new machine. |
| These steps build an image for the MinnowBoard MAX, which is |
| supported by the Yocto Project and the |
| <filename>meta-intel</filename> <filename>intel-corei7-64</filename> |
| and <filename>intel-core2-32</filename> Board Support Packages |
| (BSPs). |
| <note> |
| The MinnowBoard MAX ships with 64-bit firmware. |
| If you want to use the board in 32-bit mode, you must |
| download the |
| <ulink url='http://firmware.intel.com/projects/minnowboard-max'>32-bit firmware</ulink>. |
| </note> |
| </para> |
| |
| <para> |
| <orderedlist> |
| <listitem><para><emphasis>Create a Local Copy of the |
| <filename>meta-intel</filename> Repository:</emphasis> |
| Building an image for the MinnowBoard MAX requires the |
| <filename>meta-intel</filename> layer. |
| Use the <filename>git clone</filename> command to create |
| a local copy of the repository: |
| <literallayout class='monospaced'> |
| $ git clone git://git.yoctoproject.org/meta-intel |
| Cloning into 'meta-intel'... |
| remote: Counting objects: 10824, done. |
| remote: Compressing objects: 100% (3508/3508), done. |
| remote: Total 10824 (delta 6219), reused 10580 (delta 5975) |
| Receiving objects: 100% (10824/10824), 2.72 MiB | 482.00 KiB/s, done. |
| Resolving deltas: 100% (6219/6219), done. |
| Checking connectivity... done. |
| </literallayout> |
| </para></listitem> |
| <listitem><para><emphasis>Configure the Build:</emphasis> |
| To configure the build, you edit the |
| <filename>bblayers.conf</filename> and |
| <filename>local.conf</filename> files, both of which are |
| located in the <filename>build/conf</filename> directory. |
| </para> |
| |
| <para>Here is a quick way to make the edits. |
| The first command uses the |
| <filename>bitbake-layers add-layer</filename> command |
| to add the <filename>meta-intel</filename> |
| layer, which contains the <filename>intel-core*</filename> |
| BSPs to the build. |
| The second command selects the BSP by setting the |
| <ulink url='&YOCTO_DOCS_REF_URL;#var-MACHINE'><filename>MACHINE</filename></ulink> |
| variable. |
| <literallayout class='monospaced'> |
| $ bitbake-layers add-layer "$HOME/source/poky/meta-intel" |
| $ echo 'MACHINE = "intel-corei7-64"' >> conf/local.conf |
| </literallayout> |
| <note><title>Notes</title> |
| <para> |
| If you want a 64-bit build, use the following: |
| <literallayout class='monospaced'> |
| $ echo 'MACHINE = "intel-corei7-64"' >> conf/local.conf |
| </literallayout> |
| </para> |
| |
| <para> |
| If you want 32-bit images, use the following: |
| <literallayout class='monospaced'> |
| $ echo 'MACHINE = "intel-core2-32"' >> conf/local.conf |
| </literallayout> |
| </para> |
| </note> |
| </para></listitem> |
| <listitem><para><emphasis>Build a Minimal Image for MinnowBoard MAX:</emphasis> |
| Use the following command to build the minimal image for |
| MinnowBoard MAX. |
| Because configuration changes are minimal to set up for |
| this second build, the OpenEmbedded build system can |
| re-use files from previous builds as much as possible. |
| Re-using files means this second build will be much faster |
| than an initial build. |
| <literallayout class='monospaced'> |
| $ bitbake core-image-minimal |
| </literallayout> |
| Once the build completes, the resulting basic console image |
| is located in the Build Directory here: |
| <literallayout class='monospaced'> |
| tmp/deploy/images/intel-corei7-64/core-image-minimal-intel-corei7-64.hddimg |
| </literallayout> |
| </para></listitem> |
| <listitem><para><emphasis>Write the Image:</emphasis> |
| You can write the image to a USB key, SATA drive, or SD |
| card by using the <filename>mkefidisk.sh</filename> script, |
| which is included in the <filename>poky</filename> |
| repository at |
| <filename>scripts/contrib/mkefidisk.sh</filename>: |
| <literallayout class='monospaced'> |
| $ sudo $HOME/source/poky/scripts/contrib/mkefidisk.sh <replaceable>HOST_DEVICE</replaceable> \ |
| tmp/deploy/images/intel-corei7-64/core-image-minimal-intel-corei7-64.hddimg <replaceable>TARGET_DEVICE</replaceable> |
| </literallayout> |
| In the previous command, |
| <replaceable>HOST_DEVICE</replaceable> is the device node |
| on the build host (e.g. <filename>/dev/sdc</filename> or |
| <filename>/dev/mmcblk0</filename>). |
| <replaceable>TARGET_DEVICE</replaceable> is the name of the |
| device as the MinnowBoard MAX sees it (e.g. |
| <filename>/dev/sda</filename> or |
| <filename>/dev/mmcblk0</filename>). |
| </para></listitem> |
| <listitem><para><emphasis>Boot the Hardware:</emphasis> |
| With the boot device provisioned, you can insert the |
| media into the MinnowBoard MAX and boot the hardware. |
| The board should automatically detect the media and boot to |
| the bootloader and subsequently the operating system. |
| </para> |
| |
| <para>If the board does not boot automatically, you can |
| boot it manually from the EFI shell as follows: |
| <literallayout class='monospaced'> |
| Shell> connect -r |
| Shell> map -r |
| Shell> fs0: |
| Shell> bootx64 |
| </literallayout> |
| <note> |
| For a 32-bit image use the following: |
| <literallayout class='monospaced'> |
| Shell> bootia32 |
| </literallayout> |
| </note> |
| </para></listitem> |
| </orderedlist> |
| </para> |
| </section> |
| |
| <section id='qs-next-steps'> |
| <title>Next Steps</title> |
| |
| <para> |
| If you completed all the steps in the previous section then |
| congratulations to you! |
| What now? |
| </para> |
| |
| <para> |
| Depending on what you primary interests are with the Yocto Project, |
| you could consider any of the following: |
| <itemizedlist> |
| <listitem><para><emphasis>Visit the Yocto Project Web Site:</emphasis> |
| The official |
| <ulink url='&YOCTO_HOME_URL;'>Yocto Project</ulink> |
| web site contains information on the entire project. |
| Visiting this site is a good way to familiarize yourself |
| with the overall project. |
| </para></listitem> |
| <listitem><para><emphasis>Explore Development Models:</emphasis> |
| You can see the |
| "<ulink url='&YOCTO_DOCS_DEV_URL;#dev-manual-model'>Common Development Models</ulink>" |
| section in the Yocto Project Development Manual |
| to get an overview of the various ways by which |
| you can use the Yocto Project to develop projects. |
| </para></listitem> |
| <listitem><para><emphasis>Learn Some Open Source Basics:</emphasis> |
| If you are new to the open source environment, you might |
| read the |
| "<ulink url='&YOCTO_DOCS_DEV_URL;#dev-manual-newbie'>The Yocto Project Open Source Development Environment</ulink>" |
| chapter of the Yocto Project Development Manual. |
| This chapter presents overview material for open source |
| development in the context of the Yocto Project. |
| </para></listitem> |
| <listitem><para><emphasis>Learn About Application Development:</emphasis> |
| If your primary interests lie in developing applications, |
| you can reference the |
| <ulink url='&YOCTO_DOCS_ADT_URL;#adt-manual-intro'>Yocto Project Application Developer's Guide</ulink>. |
| </para></listitem> |
| <listitem><para><emphasis>Learn About Board Support Packages (BSPs):</emphasis> |
| If you want to learn about BSPs, see the |
| <ulink url='&YOCTO_DOCS_BSP_URL;#bsp'>Yocto Project Board Support Packages (BSP) Developer's Guide</ulink>. |
| </para></listitem> |
| <listitem><para><emphasis>Learn About Using Eclipse With the Yocto Project:</emphasis> |
| If you are an Eclipse user, you can learn about using the |
| Yocto Project in that development environment by reading |
| the |
| "<ulink url='&YOCTO_DOCS_DEV_URL;#workflow-using-the-adt-and-eclipse'>Workflow Using the ADT and Eclipse™</ulink>" |
| section in the Yocto Project Development Manual. |
| </para></listitem> |
| <listitem><para><emphasis>Learn About Toaster:</emphasis> |
| Toaster is a web interface to the Yocto Project's |
| OpenEmbedded build system. |
| If you are interested in using this type of interface to |
| create images, see the |
| <ulink url='&YOCTO_DOCS_TOAST_URL;#toaster-manual-intro'>Toaster User Manual</ulink>. |
| </para></listitem> |
| <listitem><para><emphasis>Explore Yocto Project Common Tasks and Technical Details:</emphasis> |
| If you are interested in a mix of common tasks that have to |
| do with project develop using the Yocto Project, see the |
| "<ulink url='&YOCTO_DOCS_DEV_URL;#extendpoky'>Common Tasks</ulink>" |
| section of the Yocto Project Development Manual. |
| If you want more detail, see the |
| <ulink url='&YOCTO_DOCS_REF_URL;#ref-manual-intro'>Yocto Project Reference Manual</ulink>. |
| </para></listitem> |
| </itemizedlist> |
| </para> |
| </section> |
| </article> |
| <!-- |
| vim: expandtab tw=80 ts=4 |
| --> |