| # Copyright (C) 2013 Intel Corporation |
| # |
| # Released under the MIT license (see COPYING.MIT) |
| |
| |
| # testimage.bbclass enables testing of qemu images using python unittests. |
| # Most of the tests are commands run on target image over ssh. |
| # To use it add testimage to global inherit and call your target image with -c testimage |
| # You can try it out like this: |
| # - first build a qemu core-image-sato |
| # - add IMAGE_CLASSES += "testimage" in local.conf |
| # - then bitbake core-image-sato -c testimage. That will run a standard suite of tests. |
| |
| # You can set (or append to) TEST_SUITES in local.conf to select the tests |
| # which you want to run for your target. |
| # The test names are the module names in meta/lib/oeqa/runtime. |
| # Each name in TEST_SUITES represents a required test for the image. (no skipping allowed) |
| # Appending "auto" means that it will try to run all tests that are suitable for the image (each test decides that on it's own). |
| # Note that order in TEST_SUITES is relevant: tests are run in an order such that |
| # tests mentioned in @skipUnlessPassed run before the tests that depend on them, |
| # but without such dependencies, tests run in the order in which they are listed |
| # in TEST_SUITES. |
| # |
| # A layer can add its own tests in lib/oeqa/runtime, provided it extends BBPATH as normal in its layer.conf. |
| |
| # TEST_LOG_DIR contains a command ssh log and may contain infromation about what command is running, output and return codes and for qemu a boot log till login. |
| # Booting is handled by this class, and it's not a test in itself. |
| # TEST_QEMUBOOT_TIMEOUT can be used to set the maximum time in seconds the launch code will wait for the login prompt. |
| |
| TEST_LOG_DIR ?= "${WORKDIR}/testimage" |
| |
| TEST_EXPORT_DIR ?= "${TMPDIR}/testimage/${PN}" |
| TEST_INSTALL_TMP_DIR ?= "${WORKDIR}/testimage/install_tmp" |
| TEST_NEEDED_PACKAGES_DIR ?= "${WORKDIR}/testimage/packages" |
| TEST_EXTRACTED_DIR ?= "${TEST_NEEDED_PACKAGES_DIR}/extracted" |
| TEST_PACKAGED_DIR ?= "${TEST_NEEDED_PACKAGES_DIR}/packaged" |
| |
| RPMTESTSUITE = "${@bb.utils.contains('IMAGE_PKGTYPE', 'rpm', 'dnf rpm', '', d)}" |
| SYSTEMDSUITE = "${@bb.utils.filter('DISTRO_FEATURES', 'systemd', d)}" |
| MINTESTSUITE = "ping" |
| NETTESTSUITE = "${MINTESTSUITE} ssh df date scp oe_syslog ${SYSTEMDSUITE}" |
| DEVTESTSUITE = "gcc kernelmodule ldd" |
| |
| DEFAULT_TEST_SUITES = "${MINTESTSUITE} auto" |
| DEFAULT_TEST_SUITES_pn-core-image-minimal = "${MINTESTSUITE}" |
| DEFAULT_TEST_SUITES_pn-core-image-minimal-dev = "${MINTESTSUITE}" |
| DEFAULT_TEST_SUITES_pn-core-image-full-cmdline = "${NETTESTSUITE} perl python logrotate" |
| DEFAULT_TEST_SUITES_pn-core-image-x11 = "${MINTESTSUITE}" |
| DEFAULT_TEST_SUITES_pn-core-image-lsb = "${NETTESTSUITE} pam parselogs ${RPMTESTSUITE}" |
| DEFAULT_TEST_SUITES_pn-core-image-sato = "${NETTESTSUITE} connman xorg parselogs ${RPMTESTSUITE} \ |
| ${@bb.utils.contains('IMAGE_PKGTYPE', 'rpm', 'python', '', d)}" |
| DEFAULT_TEST_SUITES_pn-core-image-sato-sdk = "${NETTESTSUITE} buildcpio buildiptables buildgalculator \ |
| connman ${DEVTESTSUITE} logrotate perl parselogs python ${RPMTESTSUITE} xorg" |
| DEFAULT_TEST_SUITES_pn-core-image-lsb-dev = "${NETTESTSUITE} pam perl python parselogs ${RPMTESTSUITE}" |
| DEFAULT_TEST_SUITES_pn-core-image-lsb-sdk = "${NETTESTSUITE} buildcpio buildiptables buildgalculator \ |
| connman ${DEVTESTSUITE} logrotate pam parselogs perl python ${RPMTESTSUITE}" |
| DEFAULT_TEST_SUITES_pn-meta-toolchain = "auto" |
| |
| # aarch64 has no graphics |
| DEFAULT_TEST_SUITES_remove_aarch64 = "xorg" |
| |
| # qemumips is quite slow and has reached the timeout limit several times on the YP build cluster, |
| # mitigate this by removing build tests for qemumips machines. |
| MIPSREMOVE ??= "buildcpio buildiptables buildgalculator" |
| DEFAULT_TEST_SUITES_remove_qemumips = "${MIPSREMOVE}" |
| DEFAULT_TEST_SUITES_remove_qemumips64 = "${MIPSREMOVE}" |
| |
| TEST_SUITES ?= "${DEFAULT_TEST_SUITES}" |
| |
| TEST_QEMUBOOT_TIMEOUT ?= "1000" |
| TEST_TARGET ?= "qemu" |
| |
| TESTIMAGEDEPENDS = "" |
| TESTIMAGEDEPENDS_qemuall = "qemu-native:do_populate_sysroot qemu-helper-native:do_populate_sysroot qemu-helper-native:do_addto_recipe_sysroot" |
| TESTIMAGEDEPENDS += "${@bb.utils.contains('IMAGE_PKGTYPE', 'rpm', 'cpio-native:do_populate_sysroot', '', d)}" |
| TESTIMAGEDEPENDS_qemuall += "${@bb.utils.contains('IMAGE_PKGTYPE', 'rpm', 'cpio-native:do_populate_sysroot', '', d)}" |
| TESTIMAGEDEPENDS_qemuall += "${@bb.utils.contains('IMAGE_PKGTYPE', 'rpm', 'createrepo-c-native:do_populate_sysroot', '', d)}" |
| TESTIMAGEDEPENDS += "${@bb.utils.contains('IMAGE_PKGTYPE', 'rpm', 'dnf-native:do_populate_sysroot', '', d)}" |
| TESTIMAGEDEPENDS += "${@bb.utils.contains('IMAGE_PKGTYPE', 'ipk', 'opkg-utils-native:do_populate_sysroot', '', d)}" |
| TESTIMAGEDEPENDS += "${@bb.utils.contains('IMAGE_PKGTYPE', 'deb', 'apt-native:do_populate_sysroot', '', d)}" |
| TESTIMAGEDEPENDS += "${@bb.utils.contains('IMAGE_PKGTYPE', 'rpm', 'createrepo-c-native:do_populate_sysroot', '', d)}" |
| |
| TESTIMAGELOCK = "${TMPDIR}/testimage.lock" |
| TESTIMAGELOCK_qemuall = "" |
| |
| TESTIMAGE_DUMP_DIR ?= "/tmp/oe-saved-tests/" |
| |
| TESTIMAGE_UPDATE_VARS ?= "DL_DIR WORKDIR DEPLOY_DIR" |
| |
| testimage_dump_target () { |
| top -bn1 |
| ps |
| free |
| df |
| # The next command will export the default gateway IP |
| export DEFAULT_GATEWAY=$(ip route | awk '/default/ { print $3}') |
| ping -c3 $DEFAULT_GATEWAY |
| dmesg |
| netstat -an |
| ip address |
| # Next command will dump logs from /var/log/ |
| find /var/log/ -type f 2>/dev/null -exec echo "====================" \; -exec echo {} \; -exec echo "====================" \; -exec cat {} \; -exec echo "" \; |
| } |
| |
| testimage_dump_host () { |
| top -bn1 |
| iostat -x -z -N -d -p ALL 20 2 |
| ps -ef |
| free |
| df |
| memstat |
| dmesg |
| ip -s link |
| netstat -an |
| } |
| |
| python do_testimage() { |
| |
| testimage_sanity(d) |
| |
| if (d.getVar('IMAGE_PKGTYPE') == 'rpm' |
| and 'dnf' in d.getVar('TEST_SUITES')): |
| create_rpm_index(d) |
| |
| testimage_main(d) |
| } |
| |
| addtask testimage |
| do_testimage[nostamp] = "1" |
| do_testimage[depends] += "${TESTIMAGEDEPENDS}" |
| do_testimage[lockfiles] += "${TESTIMAGELOCK}" |
| |
| def testimage_sanity(d): |
| if (d.getVar('TEST_TARGET') == 'simpleremote' |
| and (not d.getVar('TEST_TARGET_IP') |
| or not d.getVar('TEST_SERVER_IP'))): |
| bb.fatal('When TEST_TARGET is set to "simpleremote" ' |
| 'TEST_TARGET_IP and TEST_SERVER_IP are needed too.') |
| |
| def testimage_main(d): |
| import os |
| import json |
| import signal |
| import logging |
| |
| from bb.utils import export_proxies |
| from oeqa.core.utils.misc import updateTestData |
| from oeqa.runtime.context import OERuntimeTestContext |
| from oeqa.runtime.context import OERuntimeTestContextExecutor |
| from oeqa.core.target.qemu import supported_fstypes |
| from oeqa.core.utils.test import getSuiteCases |
| from oeqa.utils import make_logger_bitbake_compatible |
| |
| def sigterm_exception(signum, stackframe): |
| """ |
| Catch SIGTERM from worker in order to stop qemu. |
| """ |
| raise RuntimeError |
| |
| logger = make_logger_bitbake_compatible(logging.getLogger("BitBake")) |
| pn = d.getVar("PN") |
| |
| bb.utils.mkdirhier(d.getVar("TEST_LOG_DIR")) |
| |
| image_name = ("%s/%s" % (d.getVar('DEPLOY_DIR_IMAGE'), |
| d.getVar('IMAGE_LINK_NAME'))) |
| |
| tdname = "%s.testdata.json" % image_name |
| try: |
| td = json.load(open(tdname, "r")) |
| except (FileNotFoundError) as err: |
| bb.fatal('File %s Not Found. Have you built the image with INHERIT+="testimage" in the conf/local.conf?' % tdname) |
| |
| # Some variables need to be updates (mostly paths) with the |
| # ones of the current environment because some tests require them. |
| updateTestData(d, td, d.getVar('TESTIMAGE_UPDATE_VARS').split()) |
| |
| image_manifest = "%s.manifest" % image_name |
| image_packages = OERuntimeTestContextExecutor.readPackagesManifest(image_manifest) |
| |
| extract_dir = d.getVar("TEST_EXTRACTED_DIR") |
| |
| # Get machine |
| machine = d.getVar("MACHINE") |
| |
| # Get rootfs |
| fstypes = [fs for fs in d.getVar('IMAGE_FSTYPES').split(' ') |
| if fs in supported_fstypes] |
| if not fstypes: |
| bb.fatal('Unsupported image type built. Add a comptible image to ' |
| 'IMAGE_FSTYPES. Supported types: %s' % |
| ', '.join(supported_fstypes)) |
| rootfs = '%s.%s' % (image_name, fstypes[0]) |
| |
| # Get tmpdir (not really used, just for compatibility) |
| tmpdir = d.getVar("TMPDIR") |
| |
| # Get deploy_dir_image (not really used, just for compatibility) |
| dir_image = d.getVar("DEPLOY_DIR_IMAGE") |
| |
| # Get bootlog |
| bootlog = os.path.join(d.getVar("TEST_LOG_DIR"), |
| 'qemu_boot_log.%s' % d.getVar('DATETIME')) |
| |
| # Get display |
| display = d.getVar("BB_ORIGENV").getVar("DISPLAY") |
| |
| # Get kernel |
| kernel_name = ('%s-%s.bin' % (d.getVar("KERNEL_IMAGETYPE"), machine)) |
| kernel = os.path.join(d.getVar("DEPLOY_DIR_IMAGE"), kernel_name) |
| |
| # Get boottime |
| boottime = int(d.getVar("TEST_QEMUBOOT_TIMEOUT")) |
| |
| # Get use_kvm |
| qemu_use_kvm = d.getVar("QEMU_USE_KVM") |
| if qemu_use_kvm and \ |
| (qemu_use_kvm == 'True' and 'x86' in machine or \ |
| d.getVar('MACHINE') in qemu_use_kvm.split()): |
| kvm = True |
| else: |
| kvm = False |
| |
| # TODO: We use the current implementatin of qemu runner because of |
| # time constrains, qemu runner really needs a refactor too. |
| target_kwargs = { 'machine' : machine, |
| 'rootfs' : rootfs, |
| 'tmpdir' : tmpdir, |
| 'dir_image' : dir_image, |
| 'display' : display, |
| 'kernel' : kernel, |
| 'boottime' : boottime, |
| 'bootlog' : bootlog, |
| 'kvm' : kvm, |
| } |
| |
| # TODO: Currently BBPATH is needed for custom loading of targets. |
| # It would be better to find these modules using instrospection. |
| target_kwargs['target_modules_path'] = d.getVar('BBPATH') |
| |
| # runtime use network for download projects for build |
| export_proxies(d) |
| |
| # we need the host dumper in test context |
| host_dumper = OERuntimeTestContextExecutor.getHostDumper( |
| d.getVar("testimage_dump_host"), |
| d.getVar("TESTIMAGE_DUMP_DIR")) |
| |
| # the robot dance |
| target = OERuntimeTestContextExecutor.getTarget( |
| d.getVar("TEST_TARGET"), None, d.getVar("TEST_TARGET_IP"), |
| d.getVar("TEST_SERVER_IP"), **target_kwargs) |
| |
| # test context |
| tc = OERuntimeTestContext(td, logger, target, host_dumper, |
| image_packages, extract_dir) |
| |
| # Load tests before starting the target |
| test_paths = get_runtime_paths(d) |
| test_modules = d.getVar('TEST_SUITES') |
| tc.loadTests(test_paths, modules=test_modules) |
| |
| if not getSuiteCases(tc.suites): |
| bb.fatal('Empty test suite, please verify TEST_SUITES variable') |
| |
| package_extraction(d, tc.suites) |
| |
| bootparams = None |
| if d.getVar('VIRTUAL-RUNTIME_init_manager', '') == 'systemd': |
| # Add systemd.log_level=debug to enable systemd debug logging |
| bootparams = 'systemd.log_target=console' |
| |
| results = None |
| orig_sigterm_handler = signal.signal(signal.SIGTERM, sigterm_exception) |
| try: |
| # We need to check if runqemu ends unexpectedly |
| # or if the worker send us a SIGTERM |
| tc.target.start(extra_bootparams=bootparams) |
| results = tc.runTests() |
| except (RuntimeError, BlockingIOError) as err: |
| if isinstance(err, RuntimeError): |
| bb.error('testimage received SIGTERM, shutting down...') |
| else: |
| bb.error('runqemu failed, shutting down...') |
| if results: |
| results.stop() |
| results = None |
| finally: |
| signal.signal(signal.SIGTERM, orig_sigterm_handler) |
| tc.target.stop() |
| |
| # Show results (if we have them) |
| if not results: |
| bb.fatal('%s - FAILED - tests were interrupted during execution' % pn) |
| tc.logSummary(results, pn) |
| tc.logDetails() |
| if not results.wasSuccessful(): |
| bb.fatal('%s - FAILED - check the task log and the ssh log' % pn) |
| |
| def get_runtime_paths(d): |
| """ |
| Returns a list of paths where runtime test must reside. |
| |
| Runtime tests are expected in <LAYER_DIR>/lib/oeqa/runtime/cases/ |
| """ |
| paths = [] |
| |
| for layer in d.getVar('BBLAYERS').split(): |
| path = os.path.join(layer, 'lib/oeqa/runtime/cases') |
| if os.path.isdir(path): |
| paths.append(path) |
| return paths |
| |
| def create_index(arg): |
| import subprocess |
| |
| index_cmd = arg |
| try: |
| bb.note("Executing '%s' ..." % index_cmd) |
| result = subprocess.check_output(index_cmd, |
| stderr=subprocess.STDOUT, |
| shell=True) |
| result = result.decode('utf-8') |
| except subprocess.CalledProcessError as e: |
| return("Index creation command '%s' failed with return code " |
| '%d:\n%s' % (e.cmd, e.returncode, e.output.decode("utf-8"))) |
| if result: |
| bb.note(result) |
| return None |
| |
| def create_rpm_index(d): |
| # Index RPMs |
| rpm_createrepo = bb.utils.which(os.getenv('PATH'), "createrepo_c") |
| index_cmds = [] |
| archs = (d.getVar('ALL_MULTILIB_PACKAGE_ARCHS') or '').replace('-', '_') |
| |
| for arch in archs.split(): |
| rpm_dir = os.path.join(d.getVar('DEPLOY_DIR_RPM'), arch) |
| idx_path = os.path.join(d.getVar('WORKDIR'), 'oe-testimage-repo', arch) |
| |
| if not os.path.isdir(rpm_dir): |
| continue |
| |
| lockfilename = os.path.join(d.getVar('DEPLOY_DIR_RPM'), 'rpm.lock') |
| lf = bb.utils.lockfile(lockfilename, False) |
| oe.path.copyhardlinktree(rpm_dir, idx_path) |
| # Full indexes overload a 256MB image so reduce the number of rpms |
| # in the feed. Filter to r* since we use the run-postinst packages and |
| # this leaves some allarch and machine arch packages too. |
| bb.utils.remove(idx_path + "*/[a-qs-z]*.rpm") |
| bb.utils.unlockfile(lf) |
| cmd = '%s --update -q %s' % (rpm_createrepo, idx_path) |
| |
| # Create repodata |
| result = create_index(cmd) |
| if result: |
| bb.fatal('%s' % ('\n'.join(result))) |
| |
| def package_extraction(d, test_suites): |
| from oeqa.utils.package_manager import find_packages_to_extract |
| from oeqa.utils.package_manager import extract_packages |
| |
| bb.utils.remove(d.getVar("TEST_NEEDED_PACKAGES_DIR"), recurse=True) |
| packages = find_packages_to_extract(test_suites) |
| if packages: |
| bb.utils.mkdirhier(d.getVar("TEST_INSTALL_TMP_DIR")) |
| bb.utils.mkdirhier(d.getVar("TEST_PACKAGED_DIR")) |
| bb.utils.mkdirhier(d.getVar("TEST_EXTRACTED_DIR")) |
| extract_packages(d, packages) |
| |
| testimage_main[vardepsexclude] += "BB_ORIGENV DATETIME" |
| |
| inherit testsdk |