poky/meta/recipes-connectivity/wpa-supplicant/wpa-supplicant/defconfig - stefanberger/openbmc - Gitiles

 # Example wpa_supplicant build time configuration
 #
 # This file lists the configuration options that are used when building the
 # hostapd binary. All lines starting with # are ignored. Configuration option
 # lines must be commented out complete, if they are not to be included, i.e.,
 # just setting VARIABLE=n is not disabling that variable.
 #
 # This file is included in Makefile, so variables like CFLAGS and LIBS can also
 # be modified from here. In most cases, these lines should use += in order not
 # to override previous values of the variables.


 # Uncomment following two lines and fix the paths if you have installed OpenSSL
 # or GnuTLS in non-default location
 #CFLAGS += -I/usr/local/openssl/include
 #LIBS += -L/usr/local/openssl/lib

 # Some Red Hat versions seem to include kerberos header files from OpenSSL, but
 # the kerberos files are not in the default include path. Following line can be
 # used to fix build issues on such systems (krb5.h not found).
 #CFLAGS += -I/usr/include/kerberos

 # Example configuration for various cross-compilation platforms

 #### sveasoft (e.g., for Linksys WRT54G) ######################################
 #CC=mipsel-uclibc-gcc
 #CC=/opt/brcm/hndtools-mipsel-uclibc/bin/mipsel-uclibc-gcc
 #CFLAGS += -Os
 #CPPFLAGS += -I../src/include -I../../src/router/openssl/include
 #LIBS += -L/opt/brcm/hndtools-mipsel-uclibc-0.9.19/lib -lssl
 ###############################################################################

 #### openwrt (e.g., for Linksys WRT54G) #######################################
 #CC=mipsel-uclibc-gcc
 #CC=/opt/brcm/hndtools-mipsel-uclibc/bin/mipsel-uclibc-gcc
 #CFLAGS += -Os
 #CPPFLAGS=-I../src/include -I../openssl-0.9.7d/include \
 #	-I../WRT54GS/release/src/include
 #LIBS = -lssl
 ###############################################################################


 # Driver interface for Host AP driver
 CONFIG_DRIVER_HOSTAP=y

 # Driver interface for Agere driver
 #CONFIG_DRIVER_HERMES=y
 # Change include directories to match with the local setup
 #CFLAGS += -I../../hcf -I../../include -I../../include/hcf
 #CFLAGS += -I../../include/wireless

 # Driver interface for madwifi driver
 # Deprecated; use CONFIG_DRIVER_WEXT=y instead.
 #CONFIG_DRIVER_MADWIFI=y
 # Set include directory to the madwifi source tree
 #CFLAGS += -I../../madwifi

 # Driver interface for ndiswrapper
 # Deprecated; use CONFIG_DRIVER_WEXT=y instead.
 #CONFIG_DRIVER_NDISWRAPPER=y

 # Driver interface for Atmel driver
 # CONFIG_DRIVER_ATMEL=y

 # Driver interface for old Broadcom driver
 # Please note that the newer Broadcom driver ("hybrid Linux driver") supports
 # Linux wireless extensions and does not need (or even work) with the old
 # driver wrapper. Use CONFIG_DRIVER_WEXT=y with that driver.
 #CONFIG_DRIVER_BROADCOM=y
 # Example path for wlioctl.h; change to match your configuration
 #CFLAGS += -I/opt/WRT54GS/release/src/include

 # Driver interface for Intel ipw2100/2200 driver
 # Deprecated; use CONFIG_DRIVER_WEXT=y instead.
 #CONFIG_DRIVER_IPW=y

 # Driver interface for Ralink driver
 #CONFIG_DRIVER_RALINK=y

 # Driver interface for generic Linux wireless extensions
 # Note: WEXT is deprecated in the current Linux kernel version and no new
 # functionality is added to it. nl80211-based interface is the new
 # replacement for WEXT and its use allows wpa_supplicant to properly control
 # the driver to improve existing functionality like roaming and to support new
 # functionality.
 CONFIG_DRIVER_WEXT=y

 # Driver interface for Linux drivers using the nl80211 kernel interface
 CONFIG_DRIVER_NL80211=y

 # driver_nl80211.c requires libnl. If you are compiling it yourself
 # you may need to point hostapd to your version of libnl.
 #
 #CFLAGS += -I$<path to libnl include files>
 #LIBS += -L$<path to libnl library files>

 # Use libnl v2.0 (or 3.0) libraries.
 #CONFIG_LIBNL20=y

 # Use libnl 3.2 libraries (if this is selected, CONFIG_LIBNL20 is ignored)
 CONFIG_LIBNL32=y


 # Driver interface for FreeBSD net80211 layer (e.g., Atheros driver)
 #CONFIG_DRIVER_BSD=y
 #CFLAGS += -I/usr/local/include
 #LIBS += -L/usr/local/lib
 #LIBS_p += -L/usr/local/lib
 #LIBS_c += -L/usr/local/lib

 # Driver interface for Windows NDIS
 #CONFIG_DRIVER_NDIS=y
 #CFLAGS += -I/usr/include/w32api/ddk
 #LIBS += -L/usr/local/lib
 # For native build using mingw
 #CONFIG_NATIVE_WINDOWS=y
 # Additional directories for cross-compilation on Linux host for mingw target
 #CFLAGS += -I/opt/mingw/mingw32/include/ddk
 #LIBS += -L/opt/mingw/mingw32/lib
 #CC=mingw32-gcc
 # By default, driver_ndis uses WinPcap for low-level operations. This can be
 # replaced with the following option which replaces WinPcap calls with NDISUIO.
 # However, this requires that WZC is disabled (net stop wzcsvc) before starting
 # wpa_supplicant.
 # CONFIG_USE_NDISUIO=y

 # Driver interface for development testing
 #CONFIG_DRIVER_TEST=y

 # Driver interface for wired Ethernet drivers
 CONFIG_DRIVER_WIRED=y

 # Driver interface for the Broadcom RoboSwitch family
 #CONFIG_DRIVER_ROBOSWITCH=y

 # Driver interface for no driver (e.g., WPS ER only)
 #CONFIG_DRIVER_NONE=y

 # Enable IEEE 802.1X Supplicant (automatically included if any EAP method is
 # included)
 CONFIG_IEEE8021X_EAPOL=y

 # EAP-MD5
 CONFIG_EAP_MD5=y

 # EAP-MSCHAPv2
 CONFIG_EAP_MSCHAPV2=y

 # EAP-TLS
 CONFIG_EAP_TLS=y

 # EAL-PEAP
 CONFIG_EAP_PEAP=y

 # EAP-TTLS
 CONFIG_EAP_TTLS=y

 # EAP-FAST
 # Note: If OpenSSL is used as the TLS library, OpenSSL 1.0 or newer is needed
 # for EAP-FAST support. Older OpenSSL releases would need to be patched, e.g.,
 # with openssl-0.9.8x-tls-extensions.patch, to add the needed functions.
 #CONFIG_EAP_FAST=y

 # EAP-GTC
 CONFIG_EAP_GTC=y

 # EAP-OTP
 CONFIG_EAP_OTP=y

 # EAP-SIM (enable CONFIG_PCSC, if EAP-SIM is used)
 #CONFIG_EAP_SIM=y

 # EAP-PSK (experimental; this is _not_ needed for WPA-PSK)
 #CONFIG_EAP_PSK=y

 # EAP-pwd (secure authentication using only a password)
 #CONFIG_EAP_PWD=y

 # EAP-PAX
 #CONFIG_EAP_PAX=y

 # LEAP
 CONFIG_EAP_LEAP=y

 # EAP-AKA (enable CONFIG_PCSC, if EAP-AKA is used)
 #CONFIG_EAP_AKA=y

 # EAP-AKA' (enable CONFIG_PCSC, if EAP-AKA' is used).
 # This requires CONFIG_EAP_AKA to be enabled, too.
 #CONFIG_EAP_AKA_PRIME=y

 # Enable USIM simulator (Milenage) for EAP-AKA
 #CONFIG_USIM_SIMULATOR=y

 # EAP-SAKE
 #CONFIG_EAP_SAKE=y

 # EAP-GPSK
 #CONFIG_EAP_GPSK=y
 # Include support for optional SHA256 cipher suite in EAP-GPSK
 #CONFIG_EAP_GPSK_SHA256=y

 # EAP-TNC and related Trusted Network Connect support (experimental)
 #CONFIG_EAP_TNC=y

 # Wi-Fi Protected Setup (WPS)
 CONFIG_WPS=y
 # Enable WSC 2.0 support
 #CONFIG_WPS2=y
 # Enable WPS external registrar functionality
 #CONFIG_WPS_ER=y
 # Disable credentials for an open network by default when acting as a WPS
 # registrar.
 #CONFIG_WPS_REG_DISABLE_OPEN=y
 # Enable WPS support with NFC config method
 #CONFIG_WPS_NFC=y

 # EAP-IKEv2
 #CONFIG_EAP_IKEV2=y

 # EAP-EKE
 #CONFIG_EAP_EKE=y

 # PKCS#12 (PFX) support (used to read private key and certificate file from
 # a file that usually has extension .p12 or .pfx)
 CONFIG_PKCS12=y

 # Smartcard support (i.e., private key on a smartcard), e.g., with openssl
 # engine.
 CONFIG_SMARTCARD=y

 # PC/SC interface for smartcards (USIM, GSM SIM)
 # Enable this if EAP-SIM or EAP-AKA is included
 #CONFIG_PCSC=y

 # Support HT overrides (disable HT/HT40, mask MCS rates, etc.)
 #CONFIG_HT_OVERRIDES=y

 # Support VHT overrides (disable VHT, mask MCS rates, etc.)
 #CONFIG_VHT_OVERRIDES=y

 # Development testing
 #CONFIG_EAPOL_TEST=y

 # Select control interface backend for external programs, e.g, wpa_cli:
 # unix = UNIX domain sockets (default for Linux/*BSD)
 # udp = UDP sockets using localhost (127.0.0.1)
 # named_pipe = Windows Named Pipe (default for Windows)
 # udp-remote = UDP sockets with remote access (only for tests systems/purpose)
 # y = use default (backwards compatibility)
 # If this option is commented out, control interface is not included in the
 # build.
 CONFIG_CTRL_IFACE=y

 # Include support for GNU Readline and History Libraries in wpa_cli.
 # When building a wpa_cli binary for distribution, please note that these
 # libraries are licensed under GPL and as such, BSD license may not apply for
 # the resulting binary.
 #CONFIG_READLINE=y

 # Include internal line edit mode in wpa_cli. This can be used as a replacement
 # for GNU Readline to provide limited command line editing and history support.
 #CONFIG_WPA_CLI_EDIT=y

 # Remove debugging code that is printing out debug message to stdout.
 # This can be used to reduce the size of the wpa_supplicant considerably
 # if debugging code is not needed. The size reduction can be around 35%
 # (e.g., 90 kB).
 #CONFIG_NO_STDOUT_DEBUG=y

 # Remove WPA support, e.g., for wired-only IEEE 802.1X supplicant, to save
 # 35-50 kB in code size.
 #CONFIG_NO_WPA=y

 # Remove IEEE 802.11i/WPA-Personal ASCII passphrase support
 # This option can be used to reduce code size by removing support for
 # converting ASCII passphrases into PSK. If this functionality is removed, the
 # PSK can only be configured as the 64-octet hexstring (e.g., from
 # wpa_passphrase). This saves about 0.5 kB in code size.
 #CONFIG_NO_WPA_PASSPHRASE=y

 # Disable scan result processing (ap_mode=1) to save code size by about 1 kB.
 # This can be used if ap_scan=1 mode is never enabled.
 #CONFIG_NO_SCAN_PROCESSING=y

 # Select configuration backend:
 # file = text file (e.g., wpa_supplicant.conf; note: the configuration file
 #	path is given on command line, not here; this option is just used to
 #	select the backend that allows configuration files to be used)
 # winreg = Windows registry (see win_example.reg for an example)
 CONFIG_BACKEND=file

 # Remove configuration write functionality (i.e., to allow the configuration
 # file to be updated based on runtime configuration changes). The runtime
 # configuration can still be changed, the changes are just not going to be
 # persistent over restarts. This option can be used to reduce code size by
 # about 3.5 kB.
 #CONFIG_NO_CONFIG_WRITE=y

 # Remove support for configuration blobs to reduce code size by about 1.5 kB.
 #CONFIG_NO_CONFIG_BLOBS=y

 # Select program entry point implementation:
 # main = UNIX/POSIX like main() function (default)
 # main_winsvc = Windows service (read parameters from registry)
 # main_none = Very basic example (development use only)
 #CONFIG_MAIN=main

 # Select wrapper for operatins system and C library specific functions
 # unix = UNIX/POSIX like systems (default)
 # win32 = Windows systems
 # none = Empty template
 #CONFIG_OS=unix

 # Select event loop implementation
 # eloop = select() loop (default)
 # eloop_win = Windows events and WaitForMultipleObject() loop
 #CONFIG_ELOOP=eloop

 # Should we use poll instead of select? Select is used by default.
 #CONFIG_ELOOP_POLL=y

 # Select layer 2 packet implementation
 # linux = Linux packet socket (default)
 # pcap = libpcap/libdnet/WinPcap
 # freebsd = FreeBSD libpcap
 # winpcap = WinPcap with receive thread
 # ndis = Windows NDISUIO (note: requires CONFIG_USE_NDISUIO=y)
 # none = Empty template
 #CONFIG_L2_PACKET=linux

 # PeerKey handshake for Station to Station Link (IEEE 802.11e DLS)
 CONFIG_PEERKEY=y

 # IEEE 802.11w (management frame protection), also known as PMF
 # Driver support is also needed for IEEE 802.11w.
 #CONFIG_IEEE80211W=y

 # Select TLS implementation
 # openssl = OpenSSL (default)
 # gnutls = GnuTLS
 # internal = Internal TLSv1 implementation (experimental)
 # none = Empty template
 #CONFIG_TLS=openssl

 # TLS-based EAP methods require at least TLS v1.0. Newer version of TLS (v1.1)
 # can be enabled to get a stronger construction of messages when block ciphers
 # are used. It should be noted that some existing TLS v1.0 -based
 # implementation may not be compatible with TLS v1.1 message (ClientHello is
 # sent prior to negotiating which version will be used)
 #CONFIG_TLSV11=y

 # TLS-based EAP methods require at least TLS v1.0. Newer version of TLS (v1.2)
 # can be enabled to enable use of stronger crypto algorithms. It should be
 # noted that some existing TLS v1.0 -based implementation may not be compatible
 # with TLS v1.2 message (ClientHello is sent prior to negotiating which version
 # will be used)
 #CONFIG_TLSV12=y

 # If CONFIG_TLS=internal is used, additional library and include paths are
 # needed for LibTomMath. Alternatively, an integrated, minimal version of
 # LibTomMath can be used. See beginning of libtommath.c for details on benefits
 # and drawbacks of this option.
 #CONFIG_INTERNAL_LIBTOMMATH=y
 #ifndef CONFIG_INTERNAL_LIBTOMMATH
 #LTM_PATH=/usr/src/libtommath-0.39
 #CFLAGS += -I$(LTM_PATH)
 #LIBS += -L$(LTM_PATH)
 #LIBS_p += -L$(LTM_PATH)
 #endif
 # At the cost of about 4 kB of additional binary size, the internal LibTomMath
 # can be configured to include faster routines for exptmod, sqr, and div to
 # speed up DH and RSA calculation considerably
 #CONFIG_INTERNAL_LIBTOMMATH_FAST=y

 # Include NDIS event processing through WMI into wpa_supplicant/wpasvc.
 # This is only for Windows builds and requires WMI-related header files and
 # WbemUuid.Lib from Platform SDK even when building with MinGW.
 #CONFIG_NDIS_EVENTS_INTEGRATED=y
 #PLATFORMSDKLIB="/opt/Program Files/Microsoft Platform SDK/Lib"

 # Add support for old DBus control interface
 # (fi.epitest.hostap.WPASupplicant)
 #CONFIG_CTRL_IFACE_DBUS=y

 # Add support for new DBus control interface
 # (fi.w1.hostap.wpa_supplicant1)
 CONFIG_CTRL_IFACE_DBUS_NEW=y

 # Add introspection support for new DBus control interface
 #CONFIG_CTRL_IFACE_DBUS_INTRO=y

 # Add support for loading EAP methods dynamically as shared libraries.
 # When this option is enabled, each EAP method can be either included
 # statically (CONFIG_EAP_<method>=y) or dynamically (CONFIG_EAP_<method>=dyn).
 # Dynamic EAP methods are build as shared objects (eap_*.so) and they need to
 # be loaded in the beginning of the wpa_supplicant configuration file
 # (see load_dynamic_eap parameter in the example file) before being used in
 # the network blocks.
 #
 # Note that some shared parts of EAP methods are included in the main program
 # and in order to be able to use dynamic EAP methods using these parts, the
 # main program must have been build with the EAP method enabled (=y or =dyn).
 # This means that EAP-TLS/PEAP/TTLS/FAST cannot be added as dynamic libraries
 # unless at least one of them was included in the main build to force inclusion
 # of the shared code. Similarly, at least one of EAP-SIM/AKA must be included
 # in the main build to be able to load these methods dynamically.
 #
 # Please also note that using dynamic libraries will increase the total binary
 # size. Thus, it may not be the best option for targets that have limited
 # amount of memory/flash.
 #CONFIG_DYNAMIC_EAP_METHODS=y

 # IEEE Std 802.11r-2008 (Fast BSS Transition)
 #CONFIG_IEEE80211R=y

 # Add support for writing debug log to a file (/tmp/wpa_supplicant-log-#.txt)
 #CONFIG_DEBUG_FILE=y

 # Send debug messages to syslog instead of stdout
 #CONFIG_DEBUG_SYSLOG=y
 # Set syslog facility for debug messages
 #CONFIG_DEBUG_SYSLOG_FACILITY=LOG_DAEMON

 # Add support for sending all debug messages (regardless of debug verbosity)
 # to the Linux kernel tracing facility. This helps debug the entire stack by
 # making it easy to record everything happening from the driver up into the
 # same file, e.g., using trace-cmd.
 #CONFIG_DEBUG_LINUX_TRACING=y

 # Enable privilege separation (see README 'Privilege separation' for details)
 #CONFIG_PRIVSEP=y

 # Enable mitigation against certain attacks against TKIP by delaying Michael
 # MIC error reports by a random amount of time between 0 and 60 seconds
 #CONFIG_DELAYED_MIC_ERROR_REPORT=y

 # Enable tracing code for developer debugging
 # This tracks use of memory allocations and other registrations and reports
 # incorrect use with a backtrace of call (or allocation) location.
 #CONFIG_WPA_TRACE=y
 # For BSD, uncomment these.
 #LIBS += -lexecinfo
 #LIBS_p += -lexecinfo
 #LIBS_c += -lexecinfo

 # Use libbfd to get more details for developer debugging
 # This enables use of libbfd to get more detailed symbols for the backtraces
 # generated by CONFIG_WPA_TRACE=y.
 #CONFIG_WPA_TRACE_BFD=y
 # For BSD, uncomment these.
 #LIBS += -lbfd -liberty -lz
 #LIBS_p += -lbfd -liberty -lz
 #LIBS_c += -lbfd -liberty -lz

 CONFIG_TLS = %ssl%
 CONFIG_CTRL_IFACE_DBUS=y
 CONFIG_CTRL_IFACE_DBUS_NEW=y

 # wpa_supplicant depends on strong random number generation being available
 # from the operating system. os_get_random() function is used to fetch random
 # data when needed, e.g., for key generation. On Linux and BSD systems, this
 # works by reading /dev/urandom. It should be noted that the OS entropy pool
 # needs to be properly initialized before wpa_supplicant is started. This is
 # important especially on embedded devices that do not have a hardware random
 # number generator and may by default start up with minimal entropy available
 # for random number generation.
 #
 # As a safety net, wpa_supplicant is by default trying to internally collect
 # additional entropy for generating random data to mix in with the data fetched
 # from the OS. This by itself is not considered to be very strong, but it may
 # help in cases where the system pool is not initialized properly. However, it
 # is very strongly recommended that the system pool is initialized with enough
 # entropy either by using hardware assisted random number generator or by
 # storing state over device reboots.
 #
 # wpa_supplicant can be configured to maintain its own entropy store over
 # restarts to enhance random number generation. This is not perfect, but it is
 # much more secure than using the same sequence of random numbers after every
 # reboot. This can be enabled with -e<entropy file> command line option. The
 # specified file needs to be readable and writable by wpa_supplicant.
 #
 # If the os_get_random() is known to provide strong random data (e.g., on
 # Linux/BSD, the board in question is known to have reliable source of random
 # data from /dev/urandom), the internal wpa_supplicant random pool can be
 # disabled. This will save some in binary size and CPU use. However, this
 # should only be considered for builds that are known to be used on devices
 # that meet the requirements described above.
 #CONFIG_NO_RANDOM_POOL=y

 # IEEE 802.11n (High Throughput) support (mainly for AP mode)
 #CONFIG_IEEE80211N=y

 # IEEE 802.11ac (Very High Throughput) support (mainly for AP mode)
 # (depends on CONFIG_IEEE80211N)
 #CONFIG_IEEE80211AC=y

 # Wireless Network Management (IEEE Std 802.11v-2011)
 # Note: This is experimental and not complete implementation.
 #CONFIG_WNM=y

 # Interworking (IEEE 802.11u)
 # This can be used to enable functionality to improve interworking with
 # external networks (GAS/ANQP to learn more about the networks and network
 # selection based on available credentials).
 #CONFIG_INTERWORKING=y

 # Hotspot 2.0
 #CONFIG_HS20=y

 # Disable roaming in wpa_supplicant
 #CONFIG_NO_ROAMING=y

 # AP mode operations with wpa_supplicant
 # This can be used for controlling AP mode operations with wpa_supplicant. It
 # should be noted that this is mainly aimed at simple cases like
 # WPA2-Personal while more complex configurations like WPA2-Enterprise with an
 # external RADIUS server can be supported with hostapd.
 CONFIG_AP=y

 CONFIG_BGSCAN_SIMPLE=y

 # P2P (Wi-Fi Direct)
 # This can be used to enable P2P support in wpa_supplicant. See README-P2P for
 # more information on P2P operations.
 #CONFIG_P2P=y

 # Enable TDLS support
 #CONFIG_TDLS=y

 # Wi-Fi Direct
 # This can be used to enable Wi-Fi Direct extensions for P2P using an external
 # program to control the additional information exchanges in the messages.
 #CONFIG_WIFI_DISPLAY=y

 # Autoscan
 # This can be used to enable automatic scan support in wpa_supplicant.
 # See wpa_supplicant.conf for more information on autoscan usage.
 #
 # Enabling directly a module will enable autoscan support.
 # For exponential module:
 CONFIG_AUTOSCAN_EXPONENTIAL=y
 # For periodic module:
 #CONFIG_AUTOSCAN_PERIODIC=y

 # Password (and passphrase, etc.) backend for external storage
 # These optional mechanisms can be used to add support for storing passwords
 # and other secrets in external (to wpa_supplicant) location. This allows, for
 # example, operating system specific key storage to be used
 #
 # External password backend for testing purposes (developer use)
 #CONFIG_EXT_PASSWORD_TEST=y
	# Example wpa_supplicant build time configuration
	#
	# This file lists the configuration options that are used when building the
	# hostapd binary. All lines starting with # are ignored. Configuration option
	# lines must be commented out complete, if they are not to be included, i.e.,
	# just setting VARIABLE=n is not disabling that variable.
	#
	# This file is included in Makefile, so variables like CFLAGS and LIBS can also
	# be modified from here. In most cases, these lines should use += in order not
	# to override previous values of the variables.


	# Uncomment following two lines and fix the paths if you have installed OpenSSL
	# or GnuTLS in non-default location
	#CFLAGS += -I/usr/local/openssl/include
	#LIBS += -L/usr/local/openssl/lib

	# Some Red Hat versions seem to include kerberos header files from OpenSSL, but
	# the kerberos files are not in the default include path. Following line can be
	# used to fix build issues on such systems (krb5.h not found).
	#CFLAGS += -I/usr/include/kerberos

	# Example configuration for various cross-compilation platforms

	#### sveasoft (e.g., for Linksys WRT54G) ######################################
	#CC=mipsel-uclibc-gcc
	#CC=/opt/brcm/hndtools-mipsel-uclibc/bin/mipsel-uclibc-gcc
	#CFLAGS += -Os
	#CPPFLAGS += -I../src/include -I../../src/router/openssl/include
	#LIBS += -L/opt/brcm/hndtools-mipsel-uclibc-0.9.19/lib -lssl
	###############################################################################

	#### openwrt (e.g., for Linksys WRT54G) #######################################
	#CC=mipsel-uclibc-gcc
	#CC=/opt/brcm/hndtools-mipsel-uclibc/bin/mipsel-uclibc-gcc
	#CFLAGS += -Os
	#CPPFLAGS=-I../src/include -I../openssl-0.9.7d/include \
	# -I../WRT54GS/release/src/include
	#LIBS = -lssl
	###############################################################################


	# Driver interface for Host AP driver
	CONFIG_DRIVER_HOSTAP=y

	# Driver interface for Agere driver
	#CONFIG_DRIVER_HERMES=y
	# Change include directories to match with the local setup
	#CFLAGS += -I../../hcf -I../../include -I../../include/hcf
	#CFLAGS += -I../../include/wireless

	# Driver interface for madwifi driver
	# Deprecated; use CONFIG_DRIVER_WEXT=y instead.
	#CONFIG_DRIVER_MADWIFI=y
	# Set include directory to the madwifi source tree
	#CFLAGS += -I../../madwifi

	# Driver interface for ndiswrapper
	# Deprecated; use CONFIG_DRIVER_WEXT=y instead.
	#CONFIG_DRIVER_NDISWRAPPER=y

	# Driver interface for Atmel driver
	# CONFIG_DRIVER_ATMEL=y

	# Driver interface for old Broadcom driver
	# Please note that the newer Broadcom driver ("hybrid Linux driver") supports
	# Linux wireless extensions and does not need (or even work) with the old
	# driver wrapper. Use CONFIG_DRIVER_WEXT=y with that driver.
	#CONFIG_DRIVER_BROADCOM=y
	# Example path for wlioctl.h; change to match your configuration
	#CFLAGS += -I/opt/WRT54GS/release/src/include

	# Driver interface for Intel ipw2100/2200 driver
	# Deprecated; use CONFIG_DRIVER_WEXT=y instead.
	#CONFIG_DRIVER_IPW=y

	# Driver interface for Ralink driver
	#CONFIG_DRIVER_RALINK=y

	# Driver interface for generic Linux wireless extensions
	# Note: WEXT is deprecated in the current Linux kernel version and no new
	# functionality is added to it. nl80211-based interface is the new
	# replacement for WEXT and its use allows wpa_supplicant to properly control
	# the driver to improve existing functionality like roaming and to support new
	# functionality.
	CONFIG_DRIVER_WEXT=y

	# Driver interface for Linux drivers using the nl80211 kernel interface
	CONFIG_DRIVER_NL80211=y

	# driver_nl80211.c requires libnl. If you are compiling it yourself
	# you may need to point hostapd to your version of libnl.
	#
	#CFLAGS += -I$<path to libnl include files>
	#LIBS += -L$<path to libnl library files>

	# Use libnl v2.0 (or 3.0) libraries.
	#CONFIG_LIBNL20=y

	# Use libnl 3.2 libraries (if this is selected, CONFIG_LIBNL20 is ignored)
	CONFIG_LIBNL32=y


	# Driver interface for FreeBSD net80211 layer (e.g., Atheros driver)
	#CONFIG_DRIVER_BSD=y
	#CFLAGS += -I/usr/local/include
	#LIBS += -L/usr/local/lib
	#LIBS_p += -L/usr/local/lib
	#LIBS_c += -L/usr/local/lib

	# Driver interface for Windows NDIS
	#CONFIG_DRIVER_NDIS=y
	#CFLAGS += -I/usr/include/w32api/ddk
	#LIBS += -L/usr/local/lib
	# For native build using mingw
	#CONFIG_NATIVE_WINDOWS=y
	# Additional directories for cross-compilation on Linux host for mingw target
	#CFLAGS += -I/opt/mingw/mingw32/include/ddk
	#LIBS += -L/opt/mingw/mingw32/lib
	#CC=mingw32-gcc
	# By default, driver_ndis uses WinPcap for low-level operations. This can be
	# replaced with the following option which replaces WinPcap calls with NDISUIO.
	# However, this requires that WZC is disabled (net stop wzcsvc) before starting
	# wpa_supplicant.
	# CONFIG_USE_NDISUIO=y

	# Driver interface for development testing
	#CONFIG_DRIVER_TEST=y

	# Driver interface for wired Ethernet drivers
	CONFIG_DRIVER_WIRED=y

	# Driver interface for the Broadcom RoboSwitch family
	#CONFIG_DRIVER_ROBOSWITCH=y

	# Driver interface for no driver (e.g., WPS ER only)
	#CONFIG_DRIVER_NONE=y

	# Enable IEEE 802.1X Supplicant (automatically included if any EAP method is
	# included)
	CONFIG_IEEE8021X_EAPOL=y

	# EAP-MD5
	CONFIG_EAP_MD5=y

	# EAP-MSCHAPv2
	CONFIG_EAP_MSCHAPV2=y

	# EAP-TLS
	CONFIG_EAP_TLS=y

	# EAL-PEAP
	CONFIG_EAP_PEAP=y

	# EAP-TTLS
	CONFIG_EAP_TTLS=y

	# EAP-FAST
	# Note: If OpenSSL is used as the TLS library, OpenSSL 1.0 or newer is needed
	# for EAP-FAST support. Older OpenSSL releases would need to be patched, e.g.,
	# with openssl-0.9.8x-tls-extensions.patch, to add the needed functions.
	#CONFIG_EAP_FAST=y

	# EAP-GTC
	CONFIG_EAP_GTC=y

	# EAP-OTP
	CONFIG_EAP_OTP=y

	# EAP-SIM (enable CONFIG_PCSC, if EAP-SIM is used)
	#CONFIG_EAP_SIM=y

	# EAP-PSK (experimental; this is _not_ needed for WPA-PSK)
	#CONFIG_EAP_PSK=y

	# EAP-pwd (secure authentication using only a password)
	#CONFIG_EAP_PWD=y

	# EAP-PAX
	#CONFIG_EAP_PAX=y

	# LEAP
	CONFIG_EAP_LEAP=y

	# EAP-AKA (enable CONFIG_PCSC, if EAP-AKA is used)
	#CONFIG_EAP_AKA=y

	# EAP-AKA' (enable CONFIG_PCSC, if EAP-AKA' is used).
	# This requires CONFIG_EAP_AKA to be enabled, too.
	#CONFIG_EAP_AKA_PRIME=y

	# Enable USIM simulator (Milenage) for EAP-AKA
	#CONFIG_USIM_SIMULATOR=y

	# EAP-SAKE
	#CONFIG_EAP_SAKE=y

	# EAP-GPSK
	#CONFIG_EAP_GPSK=y
	# Include support for optional SHA256 cipher suite in EAP-GPSK
	#CONFIG_EAP_GPSK_SHA256=y

	# EAP-TNC and related Trusted Network Connect support (experimental)
	#CONFIG_EAP_TNC=y

	# Wi-Fi Protected Setup (WPS)
	CONFIG_WPS=y
	# Enable WSC 2.0 support
	#CONFIG_WPS2=y
	# Enable WPS external registrar functionality
	#CONFIG_WPS_ER=y
	# Disable credentials for an open network by default when acting as a WPS
	# registrar.
	#CONFIG_WPS_REG_DISABLE_OPEN=y
	# Enable WPS support with NFC config method
	#CONFIG_WPS_NFC=y

	# EAP-IKEv2
	#CONFIG_EAP_IKEV2=y

	# EAP-EKE
	#CONFIG_EAP_EKE=y

	# PKCS#12 (PFX) support (used to read private key and certificate file from
	# a file that usually has extension .p12 or .pfx)
	CONFIG_PKCS12=y

	# Smartcard support (i.e., private key on a smartcard), e.g., with openssl
	# engine.
	CONFIG_SMARTCARD=y

	# PC/SC interface for smartcards (USIM, GSM SIM)
	# Enable this if EAP-SIM or EAP-AKA is included
	#CONFIG_PCSC=y

	# Support HT overrides (disable HT/HT40, mask MCS rates, etc.)
	#CONFIG_HT_OVERRIDES=y

	# Support VHT overrides (disable VHT, mask MCS rates, etc.)
	#CONFIG_VHT_OVERRIDES=y

	# Development testing
	#CONFIG_EAPOL_TEST=y

	# Select control interface backend for external programs, e.g, wpa_cli:
	# unix = UNIX domain sockets (default for Linux/*BSD)
	# udp = UDP sockets using localhost (127.0.0.1)
	# named_pipe = Windows Named Pipe (default for Windows)
	# udp-remote = UDP sockets with remote access (only for tests systems/purpose)
	# y = use default (backwards compatibility)
	# If this option is commented out, control interface is not included in the
	# build.
	CONFIG_CTRL_IFACE=y

	# Include support for GNU Readline and History Libraries in wpa_cli.
	# When building a wpa_cli binary for distribution, please note that these
	# libraries are licensed under GPL and as such, BSD license may not apply for
	# the resulting binary.
	#CONFIG_READLINE=y

	# Include internal line edit mode in wpa_cli. This can be used as a replacement
	# for GNU Readline to provide limited command line editing and history support.
	#CONFIG_WPA_CLI_EDIT=y

	# Remove debugging code that is printing out debug message to stdout.
	# This can be used to reduce the size of the wpa_supplicant considerably
	# if debugging code is not needed. The size reduction can be around 35%
	# (e.g., 90 kB).
	#CONFIG_NO_STDOUT_DEBUG=y

	# Remove WPA support, e.g., for wired-only IEEE 802.1X supplicant, to save
	# 35-50 kB in code size.
	#CONFIG_NO_WPA=y

	# Remove IEEE 802.11i/WPA-Personal ASCII passphrase support
	# This option can be used to reduce code size by removing support for
	# converting ASCII passphrases into PSK. If this functionality is removed, the
	# PSK can only be configured as the 64-octet hexstring (e.g., from
	# wpa_passphrase). This saves about 0.5 kB in code size.
	#CONFIG_NO_WPA_PASSPHRASE=y

	# Disable scan result processing (ap_mode=1) to save code size by about 1 kB.
	# This can be used if ap_scan=1 mode is never enabled.
	#CONFIG_NO_SCAN_PROCESSING=y

	# Select configuration backend:
	# file = text file (e.g., wpa_supplicant.conf; note: the configuration file
	# path is given on command line, not here; this option is just used to
	# select the backend that allows configuration files to be used)
	# winreg = Windows registry (see win_example.reg for an example)
	CONFIG_BACKEND=file

	# Remove configuration write functionality (i.e., to allow the configuration
	# file to be updated based on runtime configuration changes). The runtime
	# configuration can still be changed, the changes are just not going to be
	# persistent over restarts. This option can be used to reduce code size by
	# about 3.5 kB.
	#CONFIG_NO_CONFIG_WRITE=y

	# Remove support for configuration blobs to reduce code size by about 1.5 kB.
	#CONFIG_NO_CONFIG_BLOBS=y

	# Select program entry point implementation:
	# main = UNIX/POSIX like main() function (default)
	# main_winsvc = Windows service (read parameters from registry)
	# main_none = Very basic example (development use only)
	#CONFIG_MAIN=main

	# Select wrapper for operatins system and C library specific functions
	# unix = UNIX/POSIX like systems (default)
	# win32 = Windows systems
	# none = Empty template
	#CONFIG_OS=unix

	# Select event loop implementation
	# eloop = select() loop (default)
	# eloop_win = Windows events and WaitForMultipleObject() loop
	#CONFIG_ELOOP=eloop

	# Should we use poll instead of select? Select is used by default.
	#CONFIG_ELOOP_POLL=y

	# Select layer 2 packet implementation
	# linux = Linux packet socket (default)
	# pcap = libpcap/libdnet/WinPcap
	# freebsd = FreeBSD libpcap
	# winpcap = WinPcap with receive thread
	# ndis = Windows NDISUIO (note: requires CONFIG_USE_NDISUIO=y)
	# none = Empty template
	#CONFIG_L2_PACKET=linux

	# PeerKey handshake for Station to Station Link (IEEE 802.11e DLS)
	CONFIG_PEERKEY=y

	# IEEE 802.11w (management frame protection), also known as PMF
	# Driver support is also needed for IEEE 802.11w.
	#CONFIG_IEEE80211W=y

	# Select TLS implementation
	# openssl = OpenSSL (default)
	# gnutls = GnuTLS
	# internal = Internal TLSv1 implementation (experimental)
	# none = Empty template
	#CONFIG_TLS=openssl

	# TLS-based EAP methods require at least TLS v1.0. Newer version of TLS (v1.1)
	# can be enabled to get a stronger construction of messages when block ciphers
	# are used. It should be noted that some existing TLS v1.0 -based
	# implementation may not be compatible with TLS v1.1 message (ClientHello is
	# sent prior to negotiating which version will be used)
	#CONFIG_TLSV11=y

	# TLS-based EAP methods require at least TLS v1.0. Newer version of TLS (v1.2)
	# can be enabled to enable use of stronger crypto algorithms. It should be
	# noted that some existing TLS v1.0 -based implementation may not be compatible
	# with TLS v1.2 message (ClientHello is sent prior to negotiating which version
	# will be used)
	#CONFIG_TLSV12=y

	# If CONFIG_TLS=internal is used, additional library and include paths are
	# needed for LibTomMath. Alternatively, an integrated, minimal version of
	# LibTomMath can be used. See beginning of libtommath.c for details on benefits
	# and drawbacks of this option.
	#CONFIG_INTERNAL_LIBTOMMATH=y
	#ifndef CONFIG_INTERNAL_LIBTOMMATH
	#LTM_PATH=/usr/src/libtommath-0.39
	#CFLAGS += -I$(LTM_PATH)
	#LIBS += -L$(LTM_PATH)
	#LIBS_p += -L$(LTM_PATH)
	#endif
	# At the cost of about 4 kB of additional binary size, the internal LibTomMath
	# can be configured to include faster routines for exptmod, sqr, and div to
	# speed up DH and RSA calculation considerably
	#CONFIG_INTERNAL_LIBTOMMATH_FAST=y

	# Include NDIS event processing through WMI into wpa_supplicant/wpasvc.
	# This is only for Windows builds and requires WMI-related header files and
	# WbemUuid.Lib from Platform SDK even when building with MinGW.
	#CONFIG_NDIS_EVENTS_INTEGRATED=y
	#PLATFORMSDKLIB="/opt/Program Files/Microsoft Platform SDK/Lib"

	# Add support for old DBus control interface
	# (fi.epitest.hostap.WPASupplicant)
	#CONFIG_CTRL_IFACE_DBUS=y

	# Add support for new DBus control interface
	# (fi.w1.hostap.wpa_supplicant1)
	CONFIG_CTRL_IFACE_DBUS_NEW=y

	# Add introspection support for new DBus control interface
	#CONFIG_CTRL_IFACE_DBUS_INTRO=y

	# Add support for loading EAP methods dynamically as shared libraries.
	# When this option is enabled, each EAP method can be either included
	# statically (CONFIG_EAP_<method>=y) or dynamically (CONFIG_EAP_<method>=dyn).
	# Dynamic EAP methods are build as shared objects (eap_*.so) and they need to
	# be loaded in the beginning of the wpa_supplicant configuration file
	# (see load_dynamic_eap parameter in the example file) before being used in
	# the network blocks.
	#
	# Note that some shared parts of EAP methods are included in the main program
	# and in order to be able to use dynamic EAP methods using these parts, the
	# main program must have been build with the EAP method enabled (=y or =dyn).
	# This means that EAP-TLS/PEAP/TTLS/FAST cannot be added as dynamic libraries
	# unless at least one of them was included in the main build to force inclusion
	# of the shared code. Similarly, at least one of EAP-SIM/AKA must be included
	# in the main build to be able to load these methods dynamically.
	#
	# Please also note that using dynamic libraries will increase the total binary
	# size. Thus, it may not be the best option for targets that have limited
	# amount of memory/flash.
	#CONFIG_DYNAMIC_EAP_METHODS=y

	# IEEE Std 802.11r-2008 (Fast BSS Transition)
	#CONFIG_IEEE80211R=y

	# Add support for writing debug log to a file (/tmp/wpa_supplicant-log-#.txt)
	#CONFIG_DEBUG_FILE=y

	# Send debug messages to syslog instead of stdout
	#CONFIG_DEBUG_SYSLOG=y
	# Set syslog facility for debug messages
	#CONFIG_DEBUG_SYSLOG_FACILITY=LOG_DAEMON

	# Add support for sending all debug messages (regardless of debug verbosity)
	# to the Linux kernel tracing facility. This helps debug the entire stack by
	# making it easy to record everything happening from the driver up into the
	# same file, e.g., using trace-cmd.
	#CONFIG_DEBUG_LINUX_TRACING=y

	# Enable privilege separation (see README 'Privilege separation' for details)
	#CONFIG_PRIVSEP=y

	# Enable mitigation against certain attacks against TKIP by delaying Michael
	# MIC error reports by a random amount of time between 0 and 60 seconds
	#CONFIG_DELAYED_MIC_ERROR_REPORT=y

	# Enable tracing code for developer debugging
	# This tracks use of memory allocations and other registrations and reports
	# incorrect use with a backtrace of call (or allocation) location.
	#CONFIG_WPA_TRACE=y
	# For BSD, uncomment these.
	#LIBS += -lexecinfo
	#LIBS_p += -lexecinfo
	#LIBS_c += -lexecinfo

	# Use libbfd to get more details for developer debugging
	# This enables use of libbfd to get more detailed symbols for the backtraces
	# generated by CONFIG_WPA_TRACE=y.
	#CONFIG_WPA_TRACE_BFD=y
	# For BSD, uncomment these.
	#LIBS += -lbfd -liberty -lz
	#LIBS_p += -lbfd -liberty -lz
	#LIBS_c += -lbfd -liberty -lz

	CONFIG_TLS = %ssl%
	CONFIG_CTRL_IFACE_DBUS=y
	CONFIG_CTRL_IFACE_DBUS_NEW=y

	# wpa_supplicant depends on strong random number generation being available
	# from the operating system. os_get_random() function is used to fetch random
	# data when needed, e.g., for key generation. On Linux and BSD systems, this
	# works by reading /dev/urandom. It should be noted that the OS entropy pool
	# needs to be properly initialized before wpa_supplicant is started. This is
	# important especially on embedded devices that do not have a hardware random
	# number generator and may by default start up with minimal entropy available
	# for random number generation.
	#
	# As a safety net, wpa_supplicant is by default trying to internally collect
	# additional entropy for generating random data to mix in with the data fetched
	# from the OS. This by itself is not considered to be very strong, but it may
	# help in cases where the system pool is not initialized properly. However, it
	# is very strongly recommended that the system pool is initialized with enough
	# entropy either by using hardware assisted random number generator or by
	# storing state over device reboots.
	#
	# wpa_supplicant can be configured to maintain its own entropy store over
	# restarts to enhance random number generation. This is not perfect, but it is
	# much more secure than using the same sequence of random numbers after every
	# reboot. This can be enabled with -e<entropy file> command line option. The
	# specified file needs to be readable and writable by wpa_supplicant.
	#
	# If the os_get_random() is known to provide strong random data (e.g., on
	# Linux/BSD, the board in question is known to have reliable source of random
	# data from /dev/urandom), the internal wpa_supplicant random pool can be
	# disabled. This will save some in binary size and CPU use. However, this
	# should only be considered for builds that are known to be used on devices
	# that meet the requirements described above.
	#CONFIG_NO_RANDOM_POOL=y

	# IEEE 802.11n (High Throughput) support (mainly for AP mode)
	#CONFIG_IEEE80211N=y

	# IEEE 802.11ac (Very High Throughput) support (mainly for AP mode)
	# (depends on CONFIG_IEEE80211N)
	#CONFIG_IEEE80211AC=y

	# Wireless Network Management (IEEE Std 802.11v-2011)
	# Note: This is experimental and not complete implementation.
	#CONFIG_WNM=y

	# Interworking (IEEE 802.11u)
	# This can be used to enable functionality to improve interworking with
	# external networks (GAS/ANQP to learn more about the networks and network
	# selection based on available credentials).
	#CONFIG_INTERWORKING=y

	# Hotspot 2.0
	#CONFIG_HS20=y

	# Disable roaming in wpa_supplicant
	#CONFIG_NO_ROAMING=y

	# AP mode operations with wpa_supplicant
	# This can be used for controlling AP mode operations with wpa_supplicant. It
	# should be noted that this is mainly aimed at simple cases like
	# WPA2-Personal while more complex configurations like WPA2-Enterprise with an
	# external RADIUS server can be supported with hostapd.
	CONFIG_AP=y

	CONFIG_BGSCAN_SIMPLE=y

	# P2P (Wi-Fi Direct)
	# This can be used to enable P2P support in wpa_supplicant. See README-P2P for
	# more information on P2P operations.
	#CONFIG_P2P=y

	# Enable TDLS support
	#CONFIG_TDLS=y

	# Wi-Fi Direct
	# This can be used to enable Wi-Fi Direct extensions for P2P using an external
	# program to control the additional information exchanges in the messages.
	#CONFIG_WIFI_DISPLAY=y

	# Autoscan
	# This can be used to enable automatic scan support in wpa_supplicant.
	# See wpa_supplicant.conf for more information on autoscan usage.
	#
	# Enabling directly a module will enable autoscan support.
	# For exponential module:
	CONFIG_AUTOSCAN_EXPONENTIAL=y
	# For periodic module:
	#CONFIG_AUTOSCAN_PERIODIC=y

	# Password (and passphrase, etc.) backend for external storage
	# These optional mechanisms can be used to add support for storing passwords
	# and other secrets in external (to wpa_supplicant) location. This allows, for
	# example, operating system specific key storage to be used
	#
	# External password backend for testing purposes (developer use)
	#CONFIG_EXT_PASSWORD_TEST=y