blob: 4dae4fa4c6ed2494e51e762f77dcbca07c55b0bd [file] [log] [blame]
require recipes-devtools/python/python.inc
DEPENDS = "python3-native libffi bzip2 gdbm openssl sqlite3 zlib virtual/libintl xz"
PR = "${INC_PR}.0"
PYTHON_MAJMIN = "3.5"
PYTHON_BINABI= "${PYTHON_MAJMIN}m"
DISTRO_SRC_URI ?= "file://sitecustomize.py"
DISTRO_SRC_URI_linuxstdbase = ""
SRC_URI = "http://www.python.org/ftp/python/${PV}/Python-${PV}.tar.xz \
file://python-config.patch \
file://0001-cross-compile-support.patch \
file://030-fixup-include-dirs.patch \
file://070-dont-clean-ipkg-install.patch \
file://080-distutils-dont_adjust_files.patch \
file://130-readline-setup.patch \
file://150-fix-setupterm.patch \
file://0001-h2py-Fix-issue-13032-where-it-fails-with-UnicodeDeco.patch \
file://tweak-MULTIARCH-for-powerpc-linux-gnuspe.patch \
file://support_SOURCE_DATE_EPOCH_in_py_compile.patch \
${DISTRO_SRC_URI} \
"
SRC_URI += "\
file://03-fix-tkinter-detection.patch \
file://avoid_warning_about_tkinter.patch \
file://cgi_py.patch \
file://host_include_contamination.patch \
file://python-3.3-multilib.patch \
file://shutil-follow-symlink-fix.patch \
file://sysroot-include-headers.patch \
file://unixccompiler.patch \
file://avoid-ncursesw-include-path.patch \
file://python3-use-CROSSPYTHONPATH-for-PYTHON_FOR_BUILD.patch \
file://sysconfig.py-add-_PYTHON_PROJECT_SRC.patch \
file://setup.py-check-cross_compiling-when-get-FLAGS.patch \
file://configure.ac-fix-LIBPL.patch \
file://0001-Issue-21272-Use-_sysconfigdata.py-to-initialize-dist.patch \
file://pass-missing-libraries-to-Extension-for-mul.patch \
"
SRC_URI[md5sum] = "f3763edf9824d5d3a15f5f646083b6e0"
SRC_URI[sha256sum] = "063d2c3b0402d6191b90731e0f735c64830e7522348aeb7ed382a83165d45009"
LIC_FILES_CHKSUM = "file://LICENSE;md5=b6ec515b22618f55fa07276b897bacea"
# exclude pre-releases for both python 2.x and 3.x
UPSTREAM_CHECK_REGEX = "[Pp]ython-(?P<pver>\d+(\.\d+)+).tar"
S = "${WORKDIR}/Python-${PV}"
inherit autotools multilib_header python3native pkgconfig
CONFIGUREOPTS += " --with-system-ffi "
CACHED_CONFIGUREVARS = "ac_cv_have_chflags=no \
ac_cv_have_lchflags=no \
ac_cv_have_long_long_format=yes \
ac_cv_buggy_getaddrinfo=no \
ac_cv_file__dev_ptmx=yes \
ac_cv_file__dev_ptc=no \
"
TARGET_CC_ARCH += "-DNDEBUG -fno-inline"
SDK_CC_ARCH += "-DNDEBUG -fno-inline"
EXTRA_OEMAKE += "CROSS_COMPILE=yes"
EXTRA_OECONF += "CROSSPYTHONPATH=${STAGING_LIBDIR_NATIVE}/python${PYTHON_MAJMIN}/lib-dynload/ --without-ensurepip"
export CROSS_COMPILE = "${TARGET_PREFIX}"
export _PYTHON_PROJECT_BASE = "${B}"
export _PYTHON_PROJECT_SRC = "${S}"
export CCSHARED = "-fPIC"
# Fix cross compilation of different modules
export CROSSPYTHONPATH = "${STAGING_LIBDIR_NATIVE}/python${PYTHON_MAJMIN}/lib-dynload/:${B}/build/lib.linux-${TARGET_ARCH}-${PYTHON_MAJMIN}:${S}/Lib:${S}/Lib/plat-linux"
# No ctypes option for python 3
PYTHONLSBOPTS = ""
PACKAGECONFIG ??= "readline"
PACKAGECONFIG[readline] = ",,readline"
do_configure_append() {
rm -f ${S}/Makefile.orig
autoreconf -Wcross --verbose --install --force --exclude=autopoint ../Python-${PV}/Modules/_ctypes/libffi
}
do_compile() {
# regenerate platform specific files, because they depend on system headers
cd ${S}/Lib/plat-linux*
include=${STAGING_INCDIR} ${STAGING_BINDIR_NATIVE}/python3-native/python3 \
${S}/Tools/scripts/h2py.py -i '(u_long)' \
${STAGING_INCDIR}/dlfcn.h \
${STAGING_INCDIR}/linux/cdrom.h \
${STAGING_INCDIR}/netinet/in.h \
${STAGING_INCDIR}/sys/types.h
sed -e 's,${STAGING_DIR_HOST},,g' -i *.py
cd -
# remove any bogus LD_LIBRARY_PATH
sed -i -e s,RUNSHARED=.*,RUNSHARED=, Makefile
if [ ! -f Makefile.orig ]; then
install -m 0644 Makefile Makefile.orig
fi
sed -i -e 's,^CONFIGURE_LDFLAGS=.*,CONFIGURE_LDFLAGS=-L. -L${STAGING_LIBDIR},g' \
-e 's,libdir=${libdir},libdir=${STAGING_LIBDIR},g' \
-e 's,libexecdir=${libexecdir},libexecdir=${STAGING_DIR_HOST}${libexecdir},g' \
-e 's,^LIBDIR=.*,LIBDIR=${STAGING_LIBDIR},g' \
-e 's,includedir=${includedir},includedir=${STAGING_INCDIR},g' \
-e 's,^INCLUDEDIR=.*,INCLUDE=${STAGING_INCDIR},g' \
-e 's,^CONFINCLUDEDIR=.*,CONFINCLUDE=${STAGING_INCDIR},g' \
Makefile
# save copy of it now, because if we do it in do_install and
# then call do_install twice we get Makefile.orig == Makefile.sysroot
install -m 0644 Makefile Makefile.sysroot
oe_runmake HOSTPGEN=${STAGING_BINDIR_NATIVE}/python3-native/pgen \
HOSTPYTHON=${STAGING_BINDIR_NATIVE}/python3-native/python3 \
STAGING_LIBDIR=${STAGING_LIBDIR} \
STAGING_BASELIBDIR=${STAGING_BASELIBDIR} \
STAGING_INCDIR=${STAGING_INCDIR} \
LIB=${baselib} \
ARCH=${TARGET_ARCH} \
OPT="${CFLAGS}" libpython3.so
oe_runmake HOSTPGEN=${STAGING_BINDIR_NATIVE}/python3-native/pgen \
HOSTPYTHON=${STAGING_BINDIR_NATIVE}/python3-native/python3 \
STAGING_LIBDIR=${STAGING_LIBDIR} \
STAGING_INCDIR=${STAGING_INCDIR} \
STAGING_BASELIBDIR=${STAGING_BASELIBDIR} \
LIB=${baselib} \
ARCH=${TARGET_ARCH} \
OPT="${CFLAGS}"
}
do_install() {
# make install needs the original Makefile, or otherwise the inclues would
# go to ${D}${STAGING...}/...
install -m 0644 Makefile.orig Makefile
install -d ${D}${libdir}/pkgconfig
install -d ${D}${libdir}/python${PYTHON_MAJMIN}/config
# rerun the build once again with original makefile this time
# run install in a separate step to avoid compile/install race
oe_runmake HOSTPGEN=${STAGING_BINDIR_NATIVE}/python3-native/pgen \
HOSTPYTHON=${STAGING_BINDIR_NATIVE}/python3-native/python3 \
STAGING_LIBDIR=${STAGING_LIBDIR} \
STAGING_INCDIR=${STAGING_INCDIR} \
STAGING_BASELIBDIR=${STAGING_BASELIBDIR} \
LIB=${baselib} \
ARCH=${TARGET_ARCH} \
DESTDIR=${D} LIBDIR=${libdir}
oe_runmake HOSTPGEN=${STAGING_BINDIR_NATIVE}/python3-native/pgen \
HOSTPYTHON=${STAGING_BINDIR_NATIVE}/python3-native/python3 \
STAGING_LIBDIR=${STAGING_LIBDIR} \
STAGING_INCDIR=${STAGING_INCDIR} \
STAGING_BASELIBDIR=${STAGING_BASELIBDIR} \
LIB=${baselib} \
ARCH=${TARGET_ARCH} \
DESTDIR=${D} LIBDIR=${libdir} install
# avoid conflict with 2to3 from Python 2
rm -f ${D}/${bindir}/2to3
install -m 0644 Makefile.sysroot ${D}/${libdir}/python${PYTHON_MAJMIN}/config/Makefile
install -m 0644 Makefile.sysroot ${D}/${libdir}/python${PYTHON_MAJMIN}/config-${PYTHON_MAJMIN}${PYTHON_ABI}/Makefile
if [ -e ${WORKDIR}/sitecustomize.py ]; then
install -m 0644 ${WORKDIR}/sitecustomize.py ${D}/${libdir}/python${PYTHON_MAJMIN}
fi
oe_multilib_header python${PYTHON_BINABI}/pyconfig.h
}
do_install_append_class-nativesdk () {
create_wrapper ${D}${bindir}/python${PYTHON_MAJMIN} TERMINFO_DIRS='${sysconfdir}/terminfo:/etc/terminfo:/usr/share/terminfo:/usr/share/misc/terminfo:/lib/terminfo' PYTHONNOUSERSITE='1'
}
SSTATE_SCAN_FILES += "Makefile"
PACKAGE_PREPROCESS_FUNCS += "py_package_preprocess"
py_package_preprocess () {
# copy back the old Makefile to fix target package
install -m 0644 ${B}/Makefile.orig ${PKGD}/${libdir}/python${PYTHON_MAJMIN}/config/Makefile
install -m 0644 ${B}/Makefile.orig ${PKGD}/${libdir}/python${PYTHON_MAJMIN}/config-${PYTHON_MAJMIN}${PYTHON_ABI}/Makefile
# Remove references to buildmachine paths in target Makefile and _sysconfigdata
sed -i -e 's:--sysroot=${STAGING_DIR_TARGET}::g' -e s:'--with-libtool-sysroot=${STAGING_DIR_TARGET}'::g \
-e 's|${DEBUG_PREFIX_MAP}||g' \
-e 's:${HOSTTOOLS_DIR}/::g' \
-e 's:${RECIPE_SYSROOT_NATIVE}::g' \
-e 's:${RECIPE_SYSROOT}::g' \
-e 's:${BASE_WORKDIR}/${MULTIMACH_TARGET_SYS}::g' \
${PKGD}/${libdir}/python${PYTHON_MAJMIN}/config/Makefile \
${PKGD}/${libdir}/python${PYTHON_MAJMIN}/config-${PYTHON_MAJMIN}${PYTHON_ABI}/Makefile \
${PKGD}/${libdir}/python${PYTHON_MAJMIN}/_sysconfigdata.py \
${PKGD}/${bindir}/python${PYTHON_BINABI}-config
# Recompile _sysconfigdata after modifying it
cd ${PKGD}
${STAGING_BINDIR_NATIVE}/${PYTHON_PN}-native/${PYTHON_PN} \
-c "from py_compile import compile; compile('./${libdir}/python${PYTHON_MAJMIN}/_sysconfigdata.py')"
${STAGING_BINDIR_NATIVE}/${PYTHON_PN}-native/${PYTHON_PN} \
-c "from py_compile import compile; compile('./${libdir}/python${PYTHON_MAJMIN}/_sysconfigdata.py', optimize=1)"
${STAGING_BINDIR_NATIVE}/${PYTHON_PN}-native/${PYTHON_PN} \
-c "from py_compile import compile; compile('./${libdir}/python${PYTHON_MAJMIN}/_sysconfigdata.py', optimize=2)"
cd -
}
# manual dependency additions
RPROVIDES_${PN}-modules = "${PN}"
RRECOMMENDS_${PN}-core_append_class-nativesdk = " nativesdk-python3-modules"
RRECOMMENDS_${PN}-crypt = "openssl"
RRECOMMENDS_${PN}-crypt_class-nativesdk = "nativesdk-openssl"
FILES_${PN}-2to3 += "${bindir}/2to3-${PYTHON_MAJMIN}"
FILES_${PN}-pydoc += "${bindir}/pydoc${PYTHON_MAJMIN} ${bindir}/pydoc3"
FILES_${PN}-idle += "${bindir}/idle3 ${bindir}/idle${PYTHON_MAJMIN}"
PACKAGES =+ "${PN}-pyvenv"
FILES_${PN}-pyvenv += "${bindir}/pyvenv-${PYTHON_MAJMIN} ${bindir}/pyvenv"
# package libpython3
PACKAGES =+ "libpython3 libpython3-staticdev"
FILES_libpython3 = "${libdir}/libpython*.so.*"
FILES_libpython3-staticdev += "${libdir}/python${PYTHON_MAJMIN}/config-${PYTHON_BINABI}/libpython${PYTHON_BINABI}.a"
INSANE_SKIP_${PN}-dev += "dev-elf"
# catch all the rest (unsorted)
PACKAGES += "${PN}-misc"
RDEPENDS_${PN}-misc += "${PN}-core ${PN}-email ${PN}-codecs"
RDEPENDS_${PN}-modules += "${PN}-misc"
FILES_${PN}-misc = "${libdir}/python${PYTHON_MAJMIN}"
# catch manpage
PACKAGES += "${PN}-man"
FILES_${PN}-man = "${datadir}/man"
BBCLASSEXTEND = "nativesdk"
RPROVIDES_${PN} += "${PN}-modules"
# We want bytecode precompiled .py files (.pyc's) by default
# but the user may set it on their own conf
INCLUDE_PYCS ?= "1"
python(){
import json
filename = os.path.join(d.getVar('THISDIR'), 'python3', 'python3-manifest.json')
# This python changes the datastore based on the contents of a file, so mark
# that dependency.
bb.parse.mark_dependency(d, filename)
with open(filename) as manifest_file:
python_manifest=json.load(manifest_file)
include_pycs = d.getVar('INCLUDE_PYCS')
packages = d.getVar('PACKAGES').split()
pn = d.getVar('PN')
newpackages=[]
for key in python_manifest:
pypackage= pn + '-' + key
if pypackage not in packages:
# We need to prepend, otherwise python-misc gets everything
# so we use a new variable
newpackages.append(pypackage)
# "Build" python's manifest FILES, RDEPENDS and SUMMARY
d.setVar('FILES_' + pypackage, '')
for value in python_manifest[key]['files']:
d.appendVar('FILES_' + pypackage, ' ' + value)
# Add cached files
if include_pycs == '1':
for value in python_manifest[key]['cached']:
d.appendVar('FILES_' + pypackage, ' ' + value)
d.setVar('RDEPENDS_' + pypackage, '')
for value in python_manifest[key]['rdepends']:
# Make it work with or without $PN
if '${PN}' in value:
value=value.split('-')[1]
d.appendVar('RDEPENDS_' + pypackage, ' ' + pn + '-' + value)
d.setVar('SUMMARY_' + pypackage, python_manifest[key]['summary'])
# We need to ensure staticdev packages match for files first so we sort in reverse
newpackages.sort(reverse=True)
# Prepending so to avoid python-misc getting everything
packages = newpackages + packages
d.setVar('PACKAGES', ' '.join(packages))
d.setVar('ALLOW_EMPTY_${PN}-modules', '1')
}
# Files needed to create a new manifest
SRC_URI += "file://create_manifest3.py file://get_module_deps3.py file://python3-manifest.json"
do_create_manifest() {
# This task should be run with every new release of Python.
# We must ensure that PACKAGECONFIG enables everything when creating
# a new manifest, this is to base our new manifest on a complete
# native python build, containing all dependencies, otherwise the task
# wont be able to find the required files.
# e.g. BerkeleyDB is an optional build dependency so it may or may not
# be present, we must ensure it is.
cd ${WORKDIR}
# This needs to be executed by python-native and NOT by HOST's python
nativepython3 create_manifest3.py
cp python3-manifest.json.new ${THISDIR}/python3/python3-manifest.json
}
# bitbake python -c create_manifest
addtask do_create_manifest
# Make sure we have native python ready when we create a new manifest
do_create_manifest[depends] += "python3:do_prepare_recipe_sysroot"
do_create_manifest[depends] += "python3:do_patch"