| """ |
| BitBake 'Fetch' implementation for perforce |
| |
| Supported SRC_URI options are: |
| |
| - module |
| The top-level location to fetch while preserving the remote paths |
| |
| The value of module can point to either a directory or a file. The result, |
| in both cases, is that the fetcher will preserve all file paths starting |
| from the module path. That is, the top-level directory in the module value |
| will also be the top-level directory in P4DIR. |
| |
| - remotepath |
| If the value "keep" is given, the full depot location of each file is |
| preserved in P4DIR. This option overrides the effect of the module option. |
| |
| """ |
| |
| # Copyright (C) 2003, 2004 Chris Larson |
| # Copyright (C) 2016 Kodak Alaris, Inc. |
| # |
| # SPDX-License-Identifier: GPL-2.0-only |
| # |
| # Based on functions from the base bb module, Copyright 2003 Holger Schurig |
| |
| import os |
| import bb |
| from bb.fetch2 import FetchMethod |
| from bb.fetch2 import FetchError |
| from bb.fetch2 import logger |
| from bb.fetch2 import runfetchcmd |
| |
| class PerforceProgressHandler (bb.progress.BasicProgressHandler): |
| """ |
| Implements basic progress information for perforce, based on the number of |
| files to be downloaded. |
| |
| The p4 print command will print one line per file, therefore it can be used |
| to "count" the number of files already completed and give an indication of |
| the progress. |
| """ |
| def __init__(self, d, num_files): |
| self._num_files = num_files |
| self._count = 0 |
| super(PerforceProgressHandler, self).__init__(d) |
| |
| # Send an initial progress event so the bar gets shown |
| self._fire_progress(-1) |
| |
| def write(self, string): |
| self._count = self._count + 1 |
| |
| percent = int(100.0 * float(self._count) / float(self._num_files)) |
| |
| # In case something goes wrong, we try to preserve our sanity |
| if percent > 100: |
| percent = 100 |
| |
| self.update(percent) |
| |
| super(PerforceProgressHandler, self).write(string) |
| |
| class Perforce(FetchMethod): |
| """ Class to fetch from perforce repositories """ |
| def supports(self, ud, d): |
| """ Check to see if a given url can be fetched with perforce. """ |
| return ud.type in ['p4'] |
| |
| def urldata_init(self, ud, d): |
| """ |
| Initialize perforce specific variables within url data. If P4CONFIG is |
| provided by the env, use it. If P4PORT is specified by the recipe, use |
| its values, which may override the settings in P4CONFIG. |
| """ |
| ud.basecmd = d.getVar("FETCHCMD_p4") or "/usr/bin/env p4" |
| |
| ud.dldir = d.getVar("P4DIR") or (d.getVar("DL_DIR") + "/p4") |
| |
| path = ud.url.split('://')[1] |
| path = path.split(';')[0] |
| delim = path.find('@'); |
| if delim != -1: |
| (ud.user, ud.pswd) = path.split('@')[0].split(':') |
| ud.path = path.split('@')[1] |
| else: |
| ud.path = path |
| |
| ud.usingp4config = False |
| p4port = d.getVar('P4PORT') |
| |
| if p4port: |
| logger.debug(1, 'Using recipe provided P4PORT: %s' % p4port) |
| ud.host = p4port |
| else: |
| logger.debug(1, 'Trying to use P4CONFIG to automatically set P4PORT...') |
| ud.usingp4config = True |
| p4cmd = '%s info | grep "Server address"' % ud.basecmd |
| bb.fetch2.check_network_access(d, p4cmd, ud.url) |
| ud.host = runfetchcmd(p4cmd, d, True) |
| ud.host = ud.host.split(': ')[1].strip() |
| logger.debug(1, 'Determined P4PORT to be: %s' % ud.host) |
| if not ud.host: |
| raise FetchError('Could not determine P4PORT from P4CONFIG') |
| |
| # Fetcher options |
| ud.module = ud.parm.get('module') |
| ud.keepremotepath = (ud.parm.get('remotepath', '') == 'keep') |
| |
| if ud.path.find('/...') >= 0: |
| ud.pathisdir = True |
| else: |
| ud.pathisdir = False |
| |
| # Avoid using the "/..." syntax in SRC_URI when a module value is given |
| if ud.pathisdir and ud.module: |
| raise FetchError('SRC_URI depot path cannot not end in /... when a module value is given') |
| |
| cleanedpath = ud.path.replace('/...', '').replace('/', '.') |
| cleanedhost = ud.host.replace(':', '.') |
| |
| # Merge the path and module into the final depot location |
| if ud.module: |
| if ud.module.find('/') == 0: |
| raise FetchError('module cannot begin with /') |
| ud.path = os.path.join(ud.path, ud.module) |
| |
| # Append the module path to the local pkg name |
| cleanedmodule = ud.module.replace('/...', '').replace('/', '.') |
| cleanedpath += '--%s' % cleanedmodule |
| |
| ud.pkgdir = os.path.join(ud.dldir, cleanedhost, cleanedpath) |
| |
| ud.setup_revisions(d) |
| |
| ud.localfile = d.expand('%s_%s_%s.tar.gz' % (cleanedhost, cleanedpath, ud.revision)) |
| |
| def _buildp4command(self, ud, d, command, depot_filename=None): |
| """ |
| Build a p4 commandline. Valid commands are "changes", "print", and |
| "files". depot_filename is the full path to the file in the depot |
| including the trailing '#rev' value. |
| """ |
| p4opt = "" |
| |
| if ud.user: |
| p4opt += ' -u "%s"' % (ud.user) |
| |
| if ud.pswd: |
| p4opt += ' -P "%s"' % (ud.pswd) |
| |
| if ud.host and not ud.usingp4config: |
| p4opt += ' -p %s' % (ud.host) |
| |
| if hasattr(ud, 'revision') and ud.revision: |
| pathnrev = '%s@%s' % (ud.path, ud.revision) |
| else: |
| pathnrev = '%s' % (ud.path) |
| |
| if depot_filename: |
| if ud.keepremotepath: |
| # preserve everything, remove the leading // |
| filename = depot_filename.lstrip('/') |
| elif ud.module: |
| # remove everything up to the module path |
| modulepath = ud.module.rstrip('/...') |
| filename = depot_filename[depot_filename.rfind(modulepath):] |
| elif ud.pathisdir: |
| # Remove leading (visible) path to obtain the filepath |
| filename = depot_filename[len(ud.path)-1:] |
| else: |
| # Remove everything, except the filename |
| filename = depot_filename[depot_filename.rfind('/'):] |
| |
| filename = filename[:filename.find('#')] # Remove trailing '#rev' |
| |
| if command == 'changes': |
| p4cmd = '%s%s changes -m 1 //%s' % (ud.basecmd, p4opt, pathnrev) |
| elif command == 'print': |
| if depot_filename is not None: |
| p4cmd = '%s%s print -o "p4/%s" "%s"' % (ud.basecmd, p4opt, filename, depot_filename) |
| else: |
| raise FetchError('No depot file name provided to p4 %s' % command, ud.url) |
| elif command == 'files': |
| p4cmd = '%s%s files //%s' % (ud.basecmd, p4opt, pathnrev) |
| else: |
| raise FetchError('Invalid p4 command %s' % command, ud.url) |
| |
| return p4cmd |
| |
| def _p4listfiles(self, ud, d): |
| """ |
| Return a list of the file names which are present in the depot using the |
| 'p4 files' command, including trailing '#rev' file revision indicator |
| """ |
| p4cmd = self._buildp4command(ud, d, 'files') |
| bb.fetch2.check_network_access(d, p4cmd, ud.url) |
| p4fileslist = runfetchcmd(p4cmd, d, True) |
| p4fileslist = [f.rstrip() for f in p4fileslist.splitlines()] |
| |
| if not p4fileslist: |
| raise FetchError('Unable to fetch listing of p4 files from %s@%s' % (ud.host, ud.path)) |
| |
| count = 0 |
| filelist = [] |
| |
| for filename in p4fileslist: |
| item = filename.split(' - ') |
| lastaction = item[1].split() |
| logger.debug(1, 'File: %s Last Action: %s' % (item[0], lastaction[0])) |
| if lastaction[0] == 'delete': |
| continue |
| filelist.append(item[0]) |
| |
| return filelist |
| |
| def download(self, ud, d): |
| """ Get the list of files, fetch each one """ |
| filelist = self._p4listfiles(ud, d) |
| if not filelist: |
| raise FetchError('No files found in depot %s@%s' % (ud.host, ud.path)) |
| |
| bb.utils.remove(ud.pkgdir, True) |
| bb.utils.mkdirhier(ud.pkgdir) |
| |
| progresshandler = PerforceProgressHandler(d, len(filelist)) |
| |
| for afile in filelist: |
| p4fetchcmd = self._buildp4command(ud, d, 'print', afile) |
| bb.fetch2.check_network_access(d, p4fetchcmd, ud.url) |
| runfetchcmd(p4fetchcmd, d, workdir=ud.pkgdir, log=progresshandler) |
| |
| runfetchcmd('tar -czf %s p4' % (ud.localpath), d, cleanup=[ud.localpath], workdir=ud.pkgdir) |
| |
| def clean(self, ud, d): |
| """ Cleanup p4 specific files and dirs""" |
| bb.utils.remove(ud.localpath) |
| bb.utils.remove(ud.pkgdir, True) |
| |
| def supports_srcrev(self): |
| return True |
| |
| def _revision_key(self, ud, d, name): |
| """ Return a unique key for the url """ |
| return 'p4:%s' % ud.pkgdir |
| |
| def _latest_revision(self, ud, d, name): |
| """ Return the latest upstream scm revision number """ |
| p4cmd = self._buildp4command(ud, d, "changes") |
| bb.fetch2.check_network_access(d, p4cmd, ud.url) |
| tip = runfetchcmd(p4cmd, d, True) |
| |
| if not tip: |
| raise FetchError('Could not determine the latest perforce changelist') |
| |
| tipcset = tip.split(' ')[1] |
| logger.debug(1, 'p4 tip found to be changelist %s' % tipcset) |
| return tipcset |
| |
| def sortable_revision(self, ud, d, name): |
| """ Return a sortable revision number """ |
| return False, self._build_revision(ud, d) |
| |
| def _build_revision(self, ud, d): |
| return ud.revision |
| |