| Brad Bishop | 6e60e8b | 2018-02-01 10:27:11 -0500 | [diff] [blame] | 1 | # NVRAM file for BCM943430WLSELG |
| Brad Bishop | 3a5fbf5 | 2017-12-04 02:17:07 -0500 | [diff] [blame] | 2 | # 2.4 GHz, 20 MHz BW mode |
| 3 | |
| 4 | # The following parameter values are just placeholders, need to be updated. |
| 5 | manfid=0x2d0 |
| Brad Bishop | 6e60e8b | 2018-02-01 10:27:11 -0500 | [diff] [blame] | 6 | prodid=0x0726 |
| Brad Bishop | 3a5fbf5 | 2017-12-04 02:17:07 -0500 | [diff] [blame] | 7 | vendid=0x14e4 |
| 8 | devid=0x43e2 |
| Brad Bishop | 6e60e8b | 2018-02-01 10:27:11 -0500 | [diff] [blame] | 9 | boardtype=0x0726 |
| 10 | boardrev=0x1202 |
| Brad Bishop | 3a5fbf5 | 2017-12-04 02:17:07 -0500 | [diff] [blame] | 11 | boardnum=22 |
| 12 | macaddr=00:90:4c:c5:12:38 |
| 13 | sromrev=11 |
| 14 | boardflags=0x00404201 |
| 15 | boardflags3=0x08000000 |
| 16 | xtalfreq=37400 |
| Brad Bishop | 6e60e8b | 2018-02-01 10:27:11 -0500 | [diff] [blame] | 17 | #xtalfreq=19200 |
| Brad Bishop | 3a5fbf5 | 2017-12-04 02:17:07 -0500 | [diff] [blame] | 18 | nocrc=1 |
| 19 | ag0=255 |
| 20 | aa2g=1 |
| 21 | ccode=ALL |
| 22 | |
| 23 | pa0itssit=0x20 |
| 24 | extpagain2g=0 |
| Brad Bishop | 6e60e8b | 2018-02-01 10:27:11 -0500 | [diff] [blame] | 25 | |
| Brad Bishop | 3a5fbf5 | 2017-12-04 02:17:07 -0500 | [diff] [blame] | 26 | #PA parameters for 2.4GHz, measured at CHIP OUTPUT |
| 27 | pa2ga0=-168,7161,-820 |
| 28 | AvVmid_c0=0x0,0xc8 |
| 29 | cckpwroffset0=5 |
| 30 | |
| 31 | # PPR params |
| 32 | maxp2ga0=84 |
| 33 | txpwrbckof=6 |
| 34 | cckbw202gpo=0 |
| 35 | legofdmbw202gpo=0x66111111 |
| 36 | mcsbw202gpo=0x77711111 |
| 37 | propbw202gpo=0xdd |
| 38 | |
| 39 | # OFDM IIR : |
| 40 | ofdmdigfilttype=18 |
| 41 | ofdmdigfilttypebe=18 |
| 42 | # PAPD mode: |
| 43 | papdmode=1 |
| 44 | papdvalidtest=1 |
| Brad Bishop | 6e60e8b | 2018-02-01 10:27:11 -0500 | [diff] [blame] | 45 | pacalidx2g=32 |
| 46 | papdepsoffset=-36 |
| 47 | papdendidx=61 |
| Brad Bishop | 3a5fbf5 | 2017-12-04 02:17:07 -0500 | [diff] [blame] | 48 | |
| 49 | il0macaddr=00:90:4c:c5:12:38 |
| 50 | wl0id=0x431b |
| 51 | |
| 52 | deadman_to=0xffffffff |
| 53 | # muxenab: 0x1 for UART enable, 0x2 for GPIOs, 0x8 for JTAG |
| 54 | muxenab=0x1 |
| 55 | # CLDO PWM voltage settings - 0x4 - 1.1 volt |
| 56 | #cldo_pwm=0x4 |
| 57 | |
| 58 | #VCO freq 326.4MHz |
| 59 | spurconfig=0x3 |