meta-xilinx/meta-xilinx-bsp/recipes-microblaze/binutils/binutils-2.31/0008-Add-new-MicroBlaze-bit-field-instructions.patch

From 5c4dacaae2ba93569c1d37cda9859c57d6649dc0 Mon Sep 17 00:00:00 2001
From: Nagaraju Mekala <nagaraju.mekala@xilinx.com>
Date: Mon, 28 Aug 2017 19:54:01 -0700
Subject: [PATCH] Add new MicroBlaze bit-field instructions

This patches adds new bsefi and bsifi instructions. BSEFI- The
instruction shall extract a bit field from a register and place it
right-adjusted in the destination register. The other bits in the
destination register shall be set to zero BSIFI- The instruction shall
insert a right-adjusted bit field from a register at another position in
the destination register. The rest of the bits in the destination
register shall be unchanged

Signed-off-by: Nagaraju Mekala <nagaraju.mekala@xilinx.com>
Signed-off-by: Manjukumar Matha <manjukumar.harthikote-matha@xilinx.com>
Upstream-Status: Pending
---
 gas/config/tc-microblaze.c | 71 +++++++++++++++++++++++++++++++++++++++++++++-
 opcodes/microblaze-dis.c   | 16 +++++++++++
 opcodes/microblaze-opc.h   | 12 +++++++-
 opcodes/microblaze-opcm.h  |  6 +++-
 4 files changed, 102 insertions(+), 3 deletions(-)

diff --git a/gas/config/tc-microblaze.c b/gas/config/tc-microblaze.c
index e135547e62..34cb80fac2 100644
--- a/gas/config/tc-microblaze.c
+++ b/gas/config/tc-microblaze.c
@@ -909,7 +909,7 @@ md_assemble (char * str)
   unsigned reg2;
   unsigned reg3;
   unsigned isize;
-  unsigned int immed, temp;
+  unsigned int immed, immed2, temp;
   expressionS exp;
   char name[20];
 
@@ -1164,7 +1164,76 @@ md_assemble (char * str)
       inst |= (reg2 << RA_LOW) & RA_MASK;
       inst |= (immed << IMM_LOW) & IMM5_MASK;
       break;
+ case INST_TYPE_RD_R1_IMM5_IMM5:
+      if (strcmp (op_end, ""))
+        op_end = parse_reg (op_end + 1, &reg1);  /* Get rd.  */
+      else
+	{
+          as_fatal (_("Error in statement syntax"));
+          reg1 = 0;
+        }
+      if (strcmp (op_end, ""))
+        op_end = parse_reg (op_end + 1, &reg2);  /* Get r1.  */
+      else
+	{
+          as_fatal (_("Error in statement syntax"));
+          reg2 = 0;
+        }
+
+      /* Check for spl registers.  */
+      if (check_spl_reg (&reg1))
+        as_fatal (_("Cannot use special register with this instruction"));
+      if (check_spl_reg (&reg2))
+        as_fatal (_("Cannot use special register with this instruction"));
 
+      /* Width immediate value.  */
+      if (strcmp (op_end, ""))
+        op_end = parse_imm (op_end + 1, &exp, MIN_IMM_WIDTH, MAX_IMM_WIDTH);
+      else
+        as_fatal (_("Error in statement syntax"));
+      if (exp.X_op != O_constant)
+	{
+          as_warn (_("Symbol used as immediate width value for bit field instruction"));
+          immed = 1;
+        }
+      else
+        immed = exp.X_add_number;
+      if (opcode->instr == bsefi && immed > 31)
+        as_fatal (_("Width value must be less than 32"));
+
+      /* Shift immediate value.  */
+      if (strcmp (op_end, ""))
+        op_end = parse_imm (op_end + 1, &exp, MIN_IMM, MAX_IMM);
+      else
+        as_fatal (_("Error in statement syntax"));
+      if (exp.X_op != O_constant)
+	    {
+          as_warn (_("Symbol used as immediate shift value for bit field instruction"));
+          immed2 = 0;
+        }
+      else
+	    {
+          output = frag_more (isize);
+          immed2 = exp.X_add_number;
+	    }
+      if (immed2 != (immed2 % 32))
+	    {
+          as_warn (_("Shift value greater than 32. using <value %% 32>"));
+          immed2 = immed2 % 32;
+        }
+
+      /* Check combined value.  */
+      if (immed + immed2 > 32)
+        as_fatal (_("Width value + shift value must not be greater than 32"));
+
+      inst |= (reg1 << RD_LOW) & RD_MASK;
+      inst |= (reg2 << RA_LOW) & RA_MASK;
+      if (opcode->instr == bsefi)
+        inst |= (immed & IMM5_MASK) << IMM_WIDTH_LOW; /* bsefi */
+      else
+        inst |= ((immed + immed2 - 1) & IMM5_MASK) << IMM_WIDTH_LOW; /* bsifi */
+      inst |= (immed2 << IMM_LOW) & IMM5_MASK;
+      break;
     case INST_TYPE_R1_R2:
       if (strcmp (op_end, ""))
         op_end = parse_reg (op_end + 1, &reg1);  /* Get r1.  */
diff --git a/opcodes/microblaze-dis.c b/opcodes/microblaze-dis.c
index 6a174b0eb9..80a47ad2fc 100644
--- a/opcodes/microblaze-dis.c
+++ b/opcodes/microblaze-dis.c
@@ -73,6 +73,18 @@ get_field_imm5_mbar (long instr)
   return(strdup(tmpstr));
 }
 
+static char *
+get_field_imm5width (long instr)
+{
+  char tmpstr[25];
+
+  if (instr & 0x00004000)
+    sprintf (tmpstr, "%d", (short)(((instr & IMM5_WIDTH_MASK) >> IMM_WIDTH_LOW))); /* bsefi */
+ else
+    sprintf (tmpstr, "%d", (short)(((instr & IMM5_WIDTH_MASK) >> IMM_WIDTH_LOW) - ((instr & IMM5_MASK) >> IMM_LOW) + 1)); /* bsifi */
+  return (strdup (tmpstr));
+}
+
 static char *
 get_field_rfsl (long instr)
 {
@@ -396,6 +408,10 @@ print_insn_microblaze (bfd_vma memaddr, struct disassemble_info * info)
         /* For mbar 16 or sleep insn.  */
         case INST_TYPE_NONE:
           break;
+        /* For bit field insns.  */
+	    case INST_TYPE_RD_R1_IMM5_IMM5:
+          print_func (stream, "\t%s, %s, %s, %s", get_field_rd (inst),get_field_r1(inst),get_field_imm5width (inst), get_field_imm5 (inst));
+	     break;
 	/* For tuqula instruction */
 	case INST_TYPE_RD:
 	  print_func (stream, "\t%s", get_field_rd (inst));
diff --git a/opcodes/microblaze-opc.h b/opcodes/microblaze-opc.h
index a64f8362da..afb34989d9 100644
--- a/opcodes/microblaze-opc.h
+++ b/opcodes/microblaze-opc.h
@@ -59,6 +59,9 @@
 /* For mbar.  */
 #define INST_TYPE_IMM5 20
 
+/* For bsefi and bsifi */
+#define INST_TYPE_RD_R1_IMM5_IMM5  21
+
 #define INST_TYPE_NONE 25
 
 
@@ -89,7 +92,9 @@
 #define OPCODE_MASK_H124  0xFFFF07FF /* High 16, and low 11 bits.  */
 #define OPCODE_MASK_H1234 0xFFFFFFFF /* All 32 bits.  */
 #define OPCODE_MASK_H3  0xFC000600  /* High 6 bits and bits 21, 22.  */
+#define OPCODE_MASK_H3B 0xFC00C600  /* High 6 bits and bits 16, 17, 21, 22.  */
 #define OPCODE_MASK_H32 0xFC00FC00  /* High 6 bits and bit 16-21.  */
+#define OPCODE_MASK_H32B 0xFC00C000  /* High 6 bits and bit 16, 17.  */
 #define OPCODE_MASK_H34B 0xFC0000FF /* High 6 bits and low 8 bits.  */
 #define OPCODE_MASK_H35B 0xFC0004FF /* High 6 bits and low 9 bits.  */
 #define OPCODE_MASK_H34C 0xFC0007E0 /* High 6 bits and bits 21-26.  */
@@ -102,7 +107,7 @@
 #define DELAY_SLOT 1
 #define NO_DELAY_SLOT 0
 
-#define MAX_OPCODES 299
+#define MAX_OPCODES 301
 
 struct op_code_struct
 {
@@ -159,6 +164,8 @@ struct op_code_struct
   {"bslli", INST_TYPE_RD_R1_IMM5, INST_NO_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0x64000400, OPCODE_MASK_H3, bslli, barrel_shift_inst },
   {"bsrai", INST_TYPE_RD_R1_IMM5, INST_NO_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0x64000200, OPCODE_MASK_H3, bsrai, barrel_shift_inst },
   {"bsrli", INST_TYPE_RD_R1_IMM5, INST_NO_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0x64000000, OPCODE_MASK_H3, bsrli, barrel_shift_inst },
+  {"bsefi", INST_TYPE_RD_R1_IMM5_IMM5, INST_NO_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0x64004000, OPCODE_MASK_H32B, bsefi, barrel_shift_inst },
+  {"bsifi", INST_TYPE_RD_R1_IMM5_IMM5, INST_NO_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0x64008000, OPCODE_MASK_H32B, bsifi, barrel_shift_inst },
   {"or",    INST_TYPE_RD_R1_R2, INST_NO_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0x80000000, OPCODE_MASK_H4, microblaze_or, logical_inst },
   {"and",   INST_TYPE_RD_R1_R2, INST_NO_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0x84000000, OPCODE_MASK_H4, microblaze_and, logical_inst },
   {"xor",   INST_TYPE_RD_R1_R2, INST_NO_OFFSET, NO_DELAY_SLOT, IMMVAL_MASK_NON_SPECIAL, 0x88000000, OPCODE_MASK_H4, microblaze_xor, logical_inst },
@@ -438,5 +445,8 @@ char pvr_register_prefix[] = "rpvr";
 #define MIN_IMM5  ((int) 0x00000000)
 #define MAX_IMM5  ((int) 0x0000001f)
 
+#define MIN_IMM_WIDTH  ((int) 0x00000001)
+#define MAX_IMM_WIDTH  ((int) 0x00000020)
+
 #endif /* MICROBLAZE_OPC */
 
diff --git a/opcodes/microblaze-opcm.h b/opcodes/microblaze-opcm.h
index 21a3dc8d76..dd6be7f65c 100644
--- a/opcodes/microblaze-opcm.h
+++ b/opcodes/microblaze-opcm.h
@@ -29,7 +29,7 @@ enum microblaze_instr
   addi, rsubi, addic, rsubic, addik, rsubik, addikc, rsubikc, mul,
   mulh, mulhu, mulhsu,swapb,swaph,
   idiv, idivu, bsll, bsra, bsrl, get, put, nget, nput, cget, cput,
-  ncget, ncput, muli, bslli, bsrai, bsrli, mului,
+  ncget, ncput, muli, bslli, bsrai, bsrli, bsefi, bsifi, mului,
   /* 'or/and/xor' are C++ keywords.  */
   microblaze_or, microblaze_and, microblaze_xor,
   andn, pcmpbf, pcmpbc, pcmpeq, pcmpne, sra, src, srl, sext8, sext16,
@@ -129,6 +129,7 @@ enum microblaze_instr_type
 #define RB_LOW  11 /* Low bit for RB.  */
 #define IMM_LOW  0 /* Low bit for immediate.  */
 #define IMM_MBAR 21 /* low bit for mbar instruction.  */
+#define IMM_WIDTH_LOW 6 /* Low bit for immediate width */
 
 #define RD_MASK 0x03E00000
 #define RA_MASK 0x001F0000
@@ -141,6 +142,9 @@ enum microblaze_instr_type
 /* Imm mask for mbar.  */
 #define IMM5_MBAR_MASK 0x03E00000
 
+/* Imm mask for extract/insert width. */
+#define IMM5_WIDTH_MASK 0x000007C0
+
 /* FSL imm mask for get, put instructions.  */
 #define  RFSL_MASK 0x000000F
 
-- 
2.15.0