| Brad Bishop | 3a5fbf5 | 2017-12-04 02:17:07 -0500 | [diff] [blame] | 1 | # NVRAM file for BCM943430WLPTH |
| 2 | # 2.4 GHz, 20 MHz BW mode |
| 3 | |
| 4 | # The following parameter values are just placeholders, need to be updated. |
| 5 | manfid=0x2d0 |
| 6 | prodid=0x0727 |
| 7 | vendid=0x14e4 |
| 8 | devid=0x43e2 |
| 9 | boardtype=0x0727 |
| 10 | boardrev=0x1101 |
| 11 | boardnum=22 |
| 12 | macaddr=00:90:4c:c5:12:38 |
| 13 | sromrev=11 |
| 14 | boardflags=0x00404201 |
| 15 | boardflags3=0x08000000 |
| 16 | xtalfreq=37400 |
| 17 | nocrc=1 |
| 18 | ag0=255 |
| 19 | aa2g=1 |
| 20 | ccode=ALL |
| 21 | |
| 22 | pa0itssit=0x20 |
| 23 | extpagain2g=0 |
| 24 | #PA parameters for 2.4GHz, measured at CHIP OUTPUT |
| 25 | pa2ga0=-168,7161,-820 |
| 26 | AvVmid_c0=0x0,0xc8 |
| 27 | cckpwroffset0=5 |
| 28 | |
| 29 | # PPR params |
| 30 | maxp2ga0=84 |
| 31 | txpwrbckof=6 |
| 32 | cckbw202gpo=0 |
| 33 | legofdmbw202gpo=0x66111111 |
| 34 | mcsbw202gpo=0x77711111 |
| 35 | propbw202gpo=0xdd |
| 36 | |
| 37 | # OFDM IIR : |
| 38 | ofdmdigfilttype=18 |
| 39 | ofdmdigfilttypebe=18 |
| 40 | # PAPD mode: |
| 41 | papdmode=1 |
| 42 | papdvalidtest=1 |
| 43 | pacalidx2g=42 |
| 44 | papdepsoffset=-22 |
| 45 | papdendidx=58 |
| 46 | |
| 47 | # LTECX flags |
| 48 | ltecxmux=0 |
| 49 | ltecxpadnum=0x0102 |
| 50 | ltecxfnsel=0x44 |
| 51 | ltecxgcigpio=0x01 |
| 52 | |
| 53 | il0macaddr=00:90:4c:c5:12:38 |
| 54 | wl0id=0x431b |
| 55 | |
| 56 | deadman_to=0xffffffff |
| 57 | # muxenab: 0x1 for UART enable, 0x2 for GPIOs, 0x8 for JTAG |
| 58 | muxenab=0x1 |
| 59 | # CLDO PWM voltage settings - 0x4 - 1.1 volt |
| 60 | #cldo_pwm=0x4 |
| 61 | |
| 62 | #VCO freq 326.4MHz |
| 63 | spurconfig=0x3 |
| 64 | |
| 65 | edonthd20l=-75 |
| 66 | edoffthd20ul=-80 |