| /* |
| * Copyright (c) 2018 Intel Corporation. |
| * Copyright (c) 2018-present Facebook. |
| * |
| * Licensed under the Apache License, Version 2.0 (the "License"); |
| * you may not use this file except in compliance with the License. |
| * You may obtain a copy of the License at |
| * |
| * http://www.apache.org/licenses/LICENSE-2.0 |
| * |
| * Unless required by applicable law or agreed to in writing, software |
| * distributed under the License is distributed on an "AS IS" BASIS, |
| * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| * See the License for the specific language governing permissions and |
| * limitations under the License. |
| */ |
| |
| #include "xyz/openbmc_project/Common/error.hpp" |
| #include <xyz/openbmc_project/Control/Boot/Mode/server.hpp> |
| #include <xyz/openbmc_project/Control/Boot/Source/server.hpp> |
| |
| #include <ipmid/api.hpp> |
| #include <ipmid/utils.hpp> |
| #include <commandutils.hpp> |
| #include <nlohmann/json.hpp> |
| #include <oemcommands.hpp> |
| #include <phosphor-logging/log.hpp> |
| #include <sdbusplus/bus.hpp> |
| |
| #include <ipmid/api.hpp> |
| #include <ipmid/api-types.hpp> |
| |
| #include <array> |
| #include <cstring> |
| #include <fstream> |
| #include <iomanip> |
| #include <iostream> |
| #include <sstream> |
| #include <string> |
| #include <vector> |
| |
| #define SIZE_IANA_ID 3 |
| |
| namespace ipmi |
| { |
| |
| using namespace phosphor::logging; |
| |
| static void registerOEMFunctions() __attribute__((constructor)); |
| sdbusplus::bus::bus dbus(ipmid_get_sd_bus_connection()); // from ipmid/api.h |
| static constexpr size_t maxFRUStringLength = 0x3F; |
| constexpr uint8_t cmdSetSystemGuid = 0xEF; |
| |
| int plat_udbg_get_post_desc(uint8_t, uint8_t*, uint8_t, uint8_t*, uint8_t*, |
| uint8_t*); |
| int plat_udbg_get_gpio_desc(uint8_t, uint8_t*, uint8_t*, uint8_t*, uint8_t*, |
| uint8_t*); |
| ipmi_ret_t plat_udbg_get_frame_data(uint8_t, uint8_t, uint8_t*, uint8_t*, |
| uint8_t*); |
| ipmi_ret_t plat_udbg_control_panel(uint8_t, uint8_t, uint8_t, uint8_t*, |
| uint8_t*); |
| int sendMeCmd(uint8_t, uint8_t, std::vector<uint8_t>&, std::vector<uint8_t>&); |
| |
| int sendBicCmd(uint8_t, uint8_t, uint8_t, std::vector<uint8_t>&, |
| std::vector<uint8_t>&); |
| |
| nlohmann::json oemData __attribute__((init_priority(101))); |
| |
| static constexpr size_t GUID_SIZE = 16; |
| // TODO Make offset and location runtime configurable to ensure we |
| // can make each define their own locations. |
| static constexpr off_t OFFSET_SYS_GUID = 0x17F0; |
| static constexpr const char* FRU_EEPROM = "/sys/bus/i2c/devices/6-0054/eeprom"; |
| |
| enum class LanParam : uint8_t |
| { |
| INPROGRESS = 0, |
| AUTHSUPPORT = 1, |
| AUTHENABLES = 2, |
| IP = 3, |
| IPSRC = 4, |
| MAC = 5, |
| SUBNET = 6, |
| GATEWAY = 12, |
| VLAN = 20, |
| CIPHER_SUITE_COUNT = 22, |
| CIPHER_SUITE_ENTRIES = 23, |
| IPV6 = 59, |
| }; |
| |
| namespace network |
| { |
| |
| constexpr auto ROOT = "/xyz/openbmc_project/network"; |
| constexpr auto SERVICE = "xyz.openbmc_project.Network"; |
| constexpr auto IPV4_TYPE = "ipv4"; |
| constexpr auto IPV6_TYPE = "ipv6"; |
| constexpr auto IPV4_PREFIX = "169.254"; |
| constexpr auto IPV6_PREFIX = "fe80"; |
| constexpr auto IP_INTERFACE = "xyz.openbmc_project.Network.IP"; |
| constexpr auto MAC_INTERFACE = "xyz.openbmc_project.Network.MACAddress"; |
| |
| bool isLinkLocalIP(const std::string& address) |
| { |
| return address.find(IPV4_PREFIX) == 0 || address.find(IPV6_PREFIX) == 0; |
| } |
| |
| DbusObjectInfo getIPObject(sdbusplus::bus::bus& bus, |
| const std::string& interface, |
| const std::string& serviceRoot, |
| const std::string& match) |
| { |
| auto objectTree = getAllDbusObjects(bus, serviceRoot, interface, match); |
| |
| if (objectTree.empty()) |
| { |
| log<level::ERR>("No Object has implemented the IP interface", |
| entry("INTERFACE=%s", interface.c_str())); |
| } |
| |
| DbusObjectInfo objectInfo; |
| |
| for (auto& object : objectTree) |
| { |
| auto variant = |
| ipmi::getDbusProperty(bus, object.second.begin()->first, |
| object.first, IP_INTERFACE, "Address"); |
| |
| objectInfo = std::make_pair(object.first, object.second.begin()->first); |
| |
| // if LinkLocalIP found look for Non-LinkLocalIP |
| if (isLinkLocalIP(std::get<std::string>(variant))) |
| { |
| continue; |
| } |
| else |
| { |
| break; |
| } |
| } |
| return objectInfo; |
| } |
| |
| } // namespace network |
| |
| namespace boot |
| { |
| |
| using namespace sdbusplus::xyz::openbmc_project::Control::Boot::server; |
| using IpmiValue = uint8_t; |
| |
| std::map<IpmiValue, Source::Sources> sourceIpmiToDbus = { |
| {0x0f, Source::Sources::Default}, |
| {0x00, Source::Sources::RemovableMedia}, |
| {0x01, Source::Sources::Network}, |
| {0x02, Source::Sources::Disk}, |
| {0x03, Source::Sources::ExternalMedia}, |
| {0x09, Source::Sources::Network}}; |
| |
| std::map<IpmiValue, Mode::Modes> modeIpmiToDbus = { |
| {0x06, Mode::Modes::Setup}, {0x00, Mode::Modes::Regular}}; |
| |
| std::map<Source::Sources, IpmiValue> sourceDbusToIpmi = { |
| {Source::Sources::Default, 0x0f}, |
| {Source::Sources::RemovableMedia, 0x00}, |
| {Source::Sources::Network, 0x01}, |
| {Source::Sources::Disk, 0x02}, |
| {Source::Sources::ExternalMedia, 0x03}}; |
| |
| std::map<Mode::Modes, IpmiValue> modeDbusToIpmi = { |
| {Mode::Modes::Setup, 0x06}, {Mode::Modes::Regular, 0x00}}; |
| |
| static constexpr auto bootModeIntf = "xyz.openbmc_project.Control.Boot.Mode"; |
| static constexpr auto bootSourceIntf = |
| "xyz.openbmc_project.Control.Boot.Source"; |
| static constexpr auto bootSourceProp = "BootSource"; |
| static constexpr auto bootModeProp = "BootMode"; |
| |
| auto instances(std::string s) |
| { |
| std::string delimiter = " "; |
| size_t pos = 0; |
| std::string token; |
| std::vector<std::string> host; |
| |
| while ((pos = s.find(delimiter)) != std::string::npos) |
| { |
| token = s.substr(0, pos); |
| host.push_back(token); |
| s.erase(0, pos + delimiter.length()); |
| } |
| host.push_back(s); |
| |
| return host; |
| } |
| |
| std::optional<size_t> findHost(size_t id) |
| { |
| std::string str = INSTANCES; |
| size_t hostId; |
| |
| if (INSTANCES == "0") |
| { |
| hostId = id; |
| } |
| else |
| { |
| static const auto hosts = instances(str); |
| std::string num = std::to_string(id + 1); |
| auto instance = std::lower_bound(hosts.begin(), hosts.end(), num); |
| |
| if ((instance == hosts.end()) || (*instance != num)) |
| { |
| return std::nullopt; |
| } |
| hostId = id + 1; |
| } |
| |
| return hostId; |
| } |
| |
| std::tuple<std::string, std::string> objPath(size_t id) |
| { |
| std::string hostName = "host" + std::to_string(id); |
| std::string bootObjPath = |
| "/xyz/openbmc_project/control/" + hostName + "/boot"; |
| return std::make_tuple(std::move(bootObjPath), std::move(hostName)); |
| } |
| |
| } // namespace boot |
| |
| //---------------------------------------------------------------------- |
| // Helper functions for storing oem data |
| //---------------------------------------------------------------------- |
| |
| void flushOemData() |
| { |
| std::ofstream file(JSON_OEM_DATA_FILE); |
| file << oemData; |
| file.close(); |
| return; |
| } |
| |
| std::string bytesToStr(uint8_t* byte, int len) |
| { |
| std::stringstream ss; |
| int i; |
| |
| ss << std::hex; |
| for (i = 0; i < len; i++) |
| { |
| ss << std::setw(2) << std::setfill('0') << (int)byte[i]; |
| } |
| |
| return ss.str(); |
| } |
| |
| int strToBytes(std::string& str, uint8_t* data) |
| { |
| std::string sstr; |
| int i; |
| |
| for (i = 0; i < (str.length()) / 2; i++) |
| { |
| sstr = str.substr(i * 2, 2); |
| data[i] = (uint8_t)std::strtol(sstr.c_str(), NULL, 16); |
| } |
| return i; |
| } |
| |
| ipmi_ret_t getNetworkData(uint8_t lan_param, char* data) |
| { |
| ipmi_ret_t rc = IPMI_CC_OK; |
| sdbusplus::bus::bus bus(ipmid_get_sd_bus_connection()); |
| |
| const std::string ethdevice = "eth0"; |
| |
| switch (static_cast<LanParam>(lan_param)) |
| { |
| case LanParam::IP: |
| { |
| auto ethIP = ethdevice + "/" + ipmi::network::IPV4_TYPE; |
| std::string ipaddress; |
| auto ipObjectInfo = ipmi::network::getIPObject( |
| bus, ipmi::network::IP_INTERFACE, ipmi::network::ROOT, ethIP); |
| |
| auto properties = ipmi::getAllDbusProperties( |
| bus, ipObjectInfo.second, ipObjectInfo.first, |
| ipmi::network::IP_INTERFACE); |
| |
| ipaddress = std::get<std::string>(properties["Address"]); |
| |
| std::strcpy(data, ipaddress.c_str()); |
| } |
| break; |
| |
| case LanParam::IPV6: |
| { |
| auto ethIP = ethdevice + "/" + ipmi::network::IPV6_TYPE; |
| std::string ipaddress; |
| auto ipObjectInfo = ipmi::network::getIPObject( |
| bus, ipmi::network::IP_INTERFACE, ipmi::network::ROOT, ethIP); |
| |
| auto properties = ipmi::getAllDbusProperties( |
| bus, ipObjectInfo.second, ipObjectInfo.first, |
| ipmi::network::IP_INTERFACE); |
| |
| ipaddress = std::get<std::string>(properties["Address"]); |
| |
| std::strcpy(data, ipaddress.c_str()); |
| } |
| break; |
| |
| case LanParam::MAC: |
| { |
| std::string macAddress; |
| auto macObjectInfo = |
| ipmi::getDbusObject(bus, ipmi::network::MAC_INTERFACE, |
| ipmi::network::ROOT, ethdevice); |
| |
| auto variant = ipmi::getDbusProperty( |
| bus, macObjectInfo.second, macObjectInfo.first, |
| ipmi::network::MAC_INTERFACE, "MACAddress"); |
| |
| macAddress = std::get<std::string>(variant); |
| |
| sscanf(macAddress.c_str(), ipmi::network::MAC_ADDRESS_FORMAT, |
| (data), (data + 1), (data + 2), (data + 3), (data + 4), |
| (data + 5)); |
| std::strcpy(data, macAddress.c_str()); |
| } |
| break; |
| |
| default: |
| rc = IPMI_CC_PARM_OUT_OF_RANGE; |
| } |
| return rc; |
| } |
| |
| // return code: 0 successful |
| int8_t getFruData(std::string& data, std::string& name) |
| { |
| std::string objpath = "/xyz/openbmc_project/FruDevice"; |
| std::string intf = "xyz.openbmc_project.FruDeviceManager"; |
| std::string service = getService(dbus, intf, objpath); |
| ObjectValueTree valueTree = getManagedObjects(dbus, service, "/"); |
| if (valueTree.empty()) |
| { |
| phosphor::logging::log<phosphor::logging::level::ERR>( |
| "No object implements interface", |
| phosphor::logging::entry("INTF=%s", intf.c_str())); |
| return -1; |
| } |
| |
| for (const auto& item : valueTree) |
| { |
| auto interface = item.second.find("xyz.openbmc_project.FruDevice"); |
| if (interface == item.second.end()) |
| { |
| continue; |
| } |
| |
| auto property = interface->second.find(name.c_str()); |
| if (property == interface->second.end()) |
| { |
| continue; |
| } |
| |
| try |
| { |
| Value variant = property->second; |
| std::string& result = std::get<std::string>(variant); |
| if (result.size() > maxFRUStringLength) |
| { |
| phosphor::logging::log<phosphor::logging::level::ERR>( |
| "FRU serial number exceed maximum length"); |
| return -1; |
| } |
| data = result; |
| return 0; |
| } |
| catch (std::bad_variant_access& e) |
| { |
| phosphor::logging::log<phosphor::logging::level::ERR>(e.what()); |
| return -1; |
| } |
| } |
| return -1; |
| } |
| |
| typedef struct |
| { |
| uint8_t cur_power_state; |
| uint8_t last_power_event; |
| uint8_t misc_power_state; |
| uint8_t front_panel_button_cap_status; |
| } ipmi_get_chassis_status_t; |
| |
| //---------------------------------------------------------------------- |
| // Get Debug Frame Info |
| //---------------------------------------------------------------------- |
| ipmi_ret_t ipmiOemDbgGetFrameInfo(ipmi_netfn_t netfn, ipmi_cmd_t cmd, |
| ipmi_request_t request, |
| ipmi_response_t response, |
| ipmi_data_len_t data_len, |
| ipmi_context_t context) |
| { |
| uint8_t* req = reinterpret_cast<uint8_t*>(request); |
| uint8_t* res = reinterpret_cast<uint8_t*>(response); |
| uint8_t num_frames = 3; |
| |
| std::memcpy(res, req, SIZE_IANA_ID); // IANA ID |
| res[SIZE_IANA_ID] = num_frames; |
| *data_len = SIZE_IANA_ID + 1; |
| |
| return IPMI_CC_OK; |
| } |
| |
| //---------------------------------------------------------------------- |
| // Get Debug Updated Frames |
| //---------------------------------------------------------------------- |
| ipmi_ret_t ipmiOemDbgGetUpdFrames(ipmi_netfn_t netfn, ipmi_cmd_t cmd, |
| ipmi_request_t request, |
| ipmi_response_t response, |
| ipmi_data_len_t data_len, |
| ipmi_context_t context) |
| { |
| uint8_t* req = reinterpret_cast<uint8_t*>(request); |
| uint8_t* res = reinterpret_cast<uint8_t*>(response); |
| uint8_t num_updates = 3; |
| *data_len = 4; |
| |
| std::memcpy(res, req, SIZE_IANA_ID); // IANA ID |
| res[SIZE_IANA_ID] = num_updates; |
| *data_len = SIZE_IANA_ID + num_updates + 1; |
| res[SIZE_IANA_ID + 1] = 1; // info page update |
| res[SIZE_IANA_ID + 2] = 2; // cri sel update |
| res[SIZE_IANA_ID + 3] = 3; // cri sensor update |
| |
| return IPMI_CC_OK; |
| } |
| |
| //---------------------------------------------------------------------- |
| // Get Debug POST Description |
| //---------------------------------------------------------------------- |
| ipmi_ret_t ipmiOemDbgGetPostDesc(ipmi_netfn_t netfn, ipmi_cmd_t cmd, |
| ipmi_request_t request, |
| ipmi_response_t response, |
| ipmi_data_len_t data_len, |
| ipmi_context_t context) |
| { |
| uint8_t* req = reinterpret_cast<uint8_t*>(request); |
| uint8_t* res = reinterpret_cast<uint8_t*>(response); |
| uint8_t index = 0; |
| uint8_t next = 0; |
| uint8_t end = 0; |
| uint8_t phase = 0; |
| uint8_t descLen = 0; |
| int ret; |
| |
| index = req[3]; |
| phase = req[4]; |
| |
| ret = plat_udbg_get_post_desc(index, &next, phase, &end, &descLen, &res[8]); |
| if (ret) |
| { |
| memcpy(res, req, SIZE_IANA_ID); // IANA ID |
| *data_len = SIZE_IANA_ID; |
| return IPMI_CC_UNSPECIFIED_ERROR; |
| } |
| |
| memcpy(res, req, SIZE_IANA_ID); // IANA ID |
| res[3] = index; |
| res[4] = next; |
| res[5] = phase; |
| res[6] = end; |
| res[7] = descLen; |
| *data_len = SIZE_IANA_ID + 5 + descLen; |
| |
| return IPMI_CC_OK; |
| } |
| |
| //---------------------------------------------------------------------- |
| // Get Debug GPIO Description |
| //---------------------------------------------------------------------- |
| ipmi_ret_t ipmiOemDbgGetGpioDesc(ipmi_netfn_t netfn, ipmi_cmd_t cmd, |
| ipmi_request_t request, |
| ipmi_response_t response, |
| ipmi_data_len_t data_len, |
| ipmi_context_t context) |
| { |
| uint8_t* req = reinterpret_cast<uint8_t*>(request); |
| uint8_t* res = reinterpret_cast<uint8_t*>(response); |
| |
| uint8_t index = 0; |
| uint8_t next = 0; |
| uint8_t level = 0; |
| uint8_t pinDef = 0; |
| uint8_t descLen = 0; |
| int ret; |
| |
| index = req[3]; |
| |
| ret = plat_udbg_get_gpio_desc(index, &next, &level, &pinDef, &descLen, |
| &res[8]); |
| if (ret) |
| { |
| memcpy(res, req, SIZE_IANA_ID); // IANA ID |
| *data_len = SIZE_IANA_ID; |
| return IPMI_CC_UNSPECIFIED_ERROR; |
| } |
| |
| memcpy(res, req, SIZE_IANA_ID); // IANA ID |
| res[3] = index; |
| res[4] = next; |
| res[5] = level; |
| res[6] = pinDef; |
| res[7] = descLen; |
| *data_len = SIZE_IANA_ID + 5 + descLen; |
| |
| return IPMI_CC_OK; |
| } |
| |
| //---------------------------------------------------------------------- |
| // Get Debug Frame Data |
| //---------------------------------------------------------------------- |
| ipmi_ret_t ipmiOemDbgGetFrameData(ipmi_netfn_t netfn, ipmi_cmd_t cmd, |
| ipmi_request_t request, |
| ipmi_response_t response, |
| ipmi_data_len_t data_len, |
| ipmi_context_t context) |
| { |
| uint8_t* req = reinterpret_cast<uint8_t*>(request); |
| uint8_t* res = reinterpret_cast<uint8_t*>(response); |
| uint8_t frame; |
| uint8_t page; |
| uint8_t next; |
| uint8_t count; |
| int ret; |
| |
| frame = req[3]; |
| page = req[4]; |
| int fr = frame; |
| int pg = page; |
| |
| ret = plat_udbg_get_frame_data(frame, page, &next, &count, &res[7]); |
| if (ret) |
| { |
| memcpy(res, req, SIZE_IANA_ID); // IANA ID |
| *data_len = SIZE_IANA_ID; |
| return IPMI_CC_UNSPECIFIED_ERROR; |
| } |
| |
| memcpy(res, req, SIZE_IANA_ID); // IANA ID |
| res[3] = frame; |
| res[4] = page; |
| res[5] = next; |
| res[6] = count; |
| *data_len = SIZE_IANA_ID + 4 + count; |
| |
| return IPMI_CC_OK; |
| } |
| |
| //---------------------------------------------------------------------- |
| // Get Debug Control Panel |
| //---------------------------------------------------------------------- |
| ipmi_ret_t ipmiOemDbgGetCtrlPanel(ipmi_netfn_t netfn, ipmi_cmd_t cmd, |
| ipmi_request_t request, |
| ipmi_response_t response, |
| ipmi_data_len_t data_len, |
| ipmi_context_t context) |
| { |
| uint8_t* req = reinterpret_cast<uint8_t*>(request); |
| uint8_t* res = reinterpret_cast<uint8_t*>(response); |
| |
| uint8_t panel; |
| uint8_t operation; |
| uint8_t item; |
| uint8_t count; |
| ipmi_ret_t ret; |
| |
| panel = req[3]; |
| operation = req[4]; |
| item = req[5]; |
| |
| ret = plat_udbg_control_panel(panel, operation, item, &count, &res[3]); |
| |
| std::memcpy(res, req, SIZE_IANA_ID); // IANA ID |
| *data_len = SIZE_IANA_ID + count; |
| |
| return ret; |
| } |
| |
| //---------------------------------------------------------------------- |
| // Set Dimm Info (CMD_OEM_SET_DIMM_INFO) |
| //---------------------------------------------------------------------- |
| ipmi_ret_t ipmiOemSetDimmInfo(ipmi_netfn_t netfn, ipmi_cmd_t cmd, |
| ipmi_request_t request, ipmi_response_t response, |
| ipmi_data_len_t data_len, ipmi_context_t context) |
| { |
| uint8_t* req = reinterpret_cast<uint8_t*>(request); |
| |
| uint8_t index = req[0]; |
| uint8_t type = req[1]; |
| uint16_t speed; |
| uint32_t size; |
| |
| memcpy(&speed, &req[2], 2); |
| memcpy(&size, &req[4], 4); |
| |
| std::stringstream ss; |
| ss << std::hex; |
| ss << std::setw(2) << std::setfill('0') << (int)index; |
| |
| oemData[KEY_SYS_CONFIG][ss.str()][KEY_DIMM_INDEX] = index; |
| oemData[KEY_SYS_CONFIG][ss.str()][KEY_DIMM_TYPE] = type; |
| oemData[KEY_SYS_CONFIG][ss.str()][KEY_DIMM_SPEED] = speed; |
| oemData[KEY_SYS_CONFIG][ss.str()][KEY_DIMM_SIZE] = size; |
| |
| flushOemData(); |
| |
| *data_len = 0; |
| |
| return IPMI_CC_OK; |
| } |
| |
| //---------------------------------------------------------------------- |
| // Get Board ID (CMD_OEM_GET_BOARD_ID) |
| //---------------------------------------------------------------------- |
| ipmi_ret_t ipmiOemGetBoardID(ipmi_netfn_t netfn, ipmi_cmd_t cmd, |
| ipmi_request_t request, ipmi_response_t response, |
| ipmi_data_len_t data_len, ipmi_context_t context) |
| { |
| uint8_t* req = reinterpret_cast<uint8_t*>(request); |
| uint8_t* res = reinterpret_cast<uint8_t*>(response); |
| |
| /* TODO: Needs to implement this after GPIO implementation */ |
| *data_len = 0; |
| |
| return IPMI_CC_OK; |
| } |
| |
| /* Helper functions to set boot order */ |
| void setBootOrder(std::string bootObjPath, uint8_t* data, |
| std::string bootOrderKey) |
| { |
| |
| std::shared_ptr<sdbusplus::asio::connection> dbus = getSdBus(); |
| |
| // SETTING BOOT MODE PROPERTY |
| auto bootValue = ipmi::boot::modeIpmiToDbus.find((data[0])); |
| std::string bootOption = |
| ipmi::boot::Mode::convertModesToString((bootValue->second)); |
| |
| std::string service = |
| getService(*dbus, ipmi::boot::bootModeIntf, bootObjPath); |
| setDbusProperty(*dbus, service, bootObjPath, ipmi::boot::bootModeIntf, |
| ipmi::boot::bootModeProp, bootOption); |
| |
| // SETTING BOOT SOURCE PROPERTY |
| auto bootOrder = ipmi::boot::sourceIpmiToDbus.find((data[1])); |
| std::string bootSource = |
| ipmi::boot::Source::convertSourcesToString((bootOrder->second)); |
| |
| service = getService(*dbus, ipmi::boot::bootSourceIntf, bootObjPath); |
| setDbusProperty(*dbus, service, bootObjPath, ipmi::boot::bootSourceIntf, |
| ipmi::boot::bootSourceProp, bootSource); |
| |
| nlohmann::json bootMode; |
| uint8_t mode = data[0]; |
| int i; |
| |
| bootMode["UEFI"] = (mode & BOOT_MODE_UEFI ? true : false); |
| bootMode["CMOS_CLR"] = (mode & BOOT_MODE_CMOS_CLR ? true : false); |
| bootMode["FORCE_BOOT"] = (mode & BOOT_MODE_FORCE_BOOT ? true : false); |
| bootMode["BOOT_FLAG"] = (mode & BOOT_MODE_BOOT_FLAG ? true : false); |
| oemData[bootOrderKey][KEY_BOOT_MODE] = bootMode; |
| |
| /* Initialize boot sequence array */ |
| oemData[bootOrderKey][KEY_BOOT_SEQ] = {}; |
| for (i = 1; i < SIZE_BOOT_ORDER; i++) |
| { |
| if (data[i] >= BOOT_SEQ_ARRAY_SIZE) |
| oemData[bootOrderKey][KEY_BOOT_SEQ][i - 1] = "NA"; |
| else |
| oemData[bootOrderKey][KEY_BOOT_SEQ][i - 1] = bootSeq[data[i]]; |
| } |
| |
| flushOemData(); |
| } |
| |
| //---------------------------------------------------------------------- |
| // Set Boot Order (CMD_OEM_SET_BOOT_ORDER) |
| //---------------------------------------------------------------------- |
| ipmi::RspType<std::vector<uint8_t>> |
| ipmiOemSetBootOrder(ipmi::Context::ptr ctx, std::vector<uint8_t> data) |
| { |
| |
| uint8_t bootSeq[SIZE_BOOT_ORDER]; |
| size_t len = data.size(); |
| |
| if (len != SIZE_BOOT_ORDER) |
| { |
| phosphor::logging::log<phosphor::logging::level::ERR>( |
| "Invalid Boot order length received"); |
| return ipmi::responseReqDataLenInvalid(); |
| } |
| |
| std::copy(std::begin(data), std::end(data), bootSeq); |
| std::optional<size_t> hostId = ipmi::boot::findHost(ctx->hostIdx); |
| |
| if (!hostId) |
| { |
| phosphor::logging::log<phosphor::logging::level::ERR>( |
| "Invalid Host Id received"); |
| return ipmi::responseInvalidCommand(); |
| } |
| auto [bootObjPath, hostName] = ipmi::boot::objPath(*hostId); |
| |
| setBootOrder(bootObjPath, bootSeq, hostName); |
| |
| return ipmi::responseSuccess(data); |
| } |
| |
| //---------------------------------------------------------------------- |
| // Get Boot Order (CMD_OEM_GET_BOOT_ORDER) |
| //---------------------------------------------------------------------- |
| ipmi::RspType<uint8_t, uint8_t, uint8_t, uint8_t, uint8_t, uint8_t> |
| ipmiOemGetBootOrder(ipmi::Context::ptr ctx) |
| { |
| uint8_t bootOption, bootOrder; |
| uint8_t bootSeq[SIZE_BOOT_ORDER]; |
| uint8_t mode = 0; |
| |
| std::optional<size_t> hostId = ipmi::boot::findHost(ctx->hostIdx); |
| |
| if (!hostId) |
| { |
| phosphor::logging::log<phosphor::logging::level::ERR>( |
| "Invalid Host Id received"); |
| return ipmi::responseInvalidCommand(); |
| } |
| auto [bootObjPath, hostName] = ipmi::boot::objPath(*hostId); |
| |
| // GETTING PROPERTY OF MODE INTERFACE |
| |
| std::shared_ptr<sdbusplus::asio::connection> dbus = getSdBus(); |
| |
| std::string service = |
| getService(*dbus, ipmi::boot::bootModeIntf, bootObjPath); |
| Value variant = |
| getDbusProperty(*dbus, service, bootObjPath, ipmi::boot::bootModeIntf, |
| ipmi::boot::bootModeProp); |
| |
| auto bootMode = ipmi::boot::Mode::convertModesFromString( |
| std::get<std::string>(variant)); |
| |
| bootOption = ipmi::boot::modeDbusToIpmi.at(bootMode); |
| |
| // GETTING PROPERTY OF SOURCE INTERFACE |
| |
| service = getService(*dbus, ipmi::boot::bootSourceIntf, bootObjPath); |
| variant = |
| getDbusProperty(*dbus, service, bootObjPath, ipmi::boot::bootSourceIntf, |
| ipmi::boot::bootSourceProp); |
| auto bootSource = ipmi::boot::Source::convertSourcesFromString( |
| std::get<std::string>(variant)); |
| |
| bootOrder = ipmi::boot::sourceDbusToIpmi.at(bootSource); |
| |
| if (oemData.find(hostName) == oemData.end()) |
| { |
| /* Return default boot order 0100090203ff */ |
| uint8_t defaultBoot[SIZE_BOOT_ORDER] = { |
| BOOT_MODE_UEFI, bootMap["USB_DEV"], bootMap["NET_IPV6"], |
| bootMap["SATA_HDD"], bootMap["SATA_CD"], 0xff}; |
| |
| memcpy(bootSeq, defaultBoot, SIZE_BOOT_ORDER); |
| phosphor::logging::log<phosphor::logging::level::INFO>( |
| "Set default boot order"); |
| setBootOrder(bootObjPath, defaultBoot, hostName); |
| } |
| else |
| { |
| nlohmann::json bootMode = oemData[hostName][KEY_BOOT_MODE]; |
| if (bootMode["UEFI"]) |
| mode |= BOOT_MODE_UEFI; |
| if (bootMode["CMOS_CLR"]) |
| mode |= BOOT_MODE_CMOS_CLR; |
| if (bootMode["BOOT_FLAG"]) |
| mode |= BOOT_MODE_BOOT_FLAG; |
| |
| bootSeq[0] = mode; |
| |
| for (int i = 1; i < SIZE_BOOT_ORDER; i++) |
| { |
| std::string seqStr = oemData[hostName][KEY_BOOT_SEQ][i - 1]; |
| if (bootMap.find(seqStr) != bootMap.end()) |
| bootSeq[i] = bootMap[seqStr]; |
| else |
| bootSeq[i] = 0xff; |
| } |
| } |
| |
| return ipmi::responseSuccess(bootOption, bootOrder, bootSeq[2], bootSeq[3], |
| bootSeq[4], bootSeq[5]); |
| } |
| // Set Machine Config Info (CMD_OEM_SET_MACHINE_CONFIG_INFO) |
| //---------------------------------------------------------------------- |
| ipmi_ret_t ipmiOemSetMachineCfgInfo(ipmi_netfn_t netfn, ipmi_cmd_t cmd, |
| ipmi_request_t request, |
| ipmi_response_t response, |
| ipmi_data_len_t data_len, |
| ipmi_context_t context) |
| { |
| machineConfigInfo_t* req = reinterpret_cast<machineConfigInfo_t*>(request); |
| uint8_t len = *data_len; |
| |
| *data_len = 0; |
| |
| if (len < sizeof(machineConfigInfo_t)) |
| { |
| phosphor::logging::log<phosphor::logging::level::ERR>( |
| "Invalid machine configuration length received"); |
| return IPMI_CC_REQ_DATA_LEN_INVALID; |
| } |
| |
| if (req->chassis_type >= sizeof(chassisType) / sizeof(uint8_t*)) |
| oemData[KEY_MC_CONFIG][KEY_MC_CHAS_TYPE] = "UNKNOWN"; |
| else |
| oemData[KEY_MC_CONFIG][KEY_MC_CHAS_TYPE] = |
| chassisType[req->chassis_type]; |
| |
| if (req->mb_type >= sizeof(mbType) / sizeof(uint8_t*)) |
| oemData[KEY_MC_CONFIG][KEY_MC_MB_TYPE] = "UNKNOWN"; |
| else |
| oemData[KEY_MC_CONFIG][KEY_MC_MB_TYPE] = mbType[req->mb_type]; |
| |
| oemData[KEY_MC_CONFIG][KEY_MC_PROC_CNT] = req->proc_cnt; |
| oemData[KEY_MC_CONFIG][KEY_MC_MEM_CNT] = req->mem_cnt; |
| oemData[KEY_MC_CONFIG][KEY_MC_HDD35_CNT] = req->hdd35_cnt; |
| oemData[KEY_MC_CONFIG][KEY_MC_HDD25_CNT] = req->hdd25_cnt; |
| |
| if (req->riser_type >= sizeof(riserType) / sizeof(uint8_t*)) |
| oemData[KEY_MC_CONFIG][KEY_MC_RSR_TYPE] = "UNKNOWN"; |
| else |
| oemData[KEY_MC_CONFIG][KEY_MC_RSR_TYPE] = riserType[req->riser_type]; |
| |
| oemData[KEY_MC_CONFIG][KEY_MC_PCIE_LOC] = {}; |
| int i = 0; |
| if (req->pcie_card_loc & BIT_0) |
| oemData[KEY_MC_CONFIG][KEY_MC_PCIE_LOC][i++] = "SLOT1"; |
| if (req->pcie_card_loc & BIT_1) |
| oemData[KEY_MC_CONFIG][KEY_MC_PCIE_LOC][i++] = "SLOT2"; |
| if (req->pcie_card_loc & BIT_2) |
| oemData[KEY_MC_CONFIG][KEY_MC_PCIE_LOC][i++] = "SLOT3"; |
| if (req->pcie_card_loc & BIT_3) |
| oemData[KEY_MC_CONFIG][KEY_MC_PCIE_LOC][i++] = "SLOT4"; |
| |
| if (req->slot1_pcie_type >= sizeof(pcieType) / sizeof(uint8_t*)) |
| oemData[KEY_MC_CONFIG][KEY_MC_SLOT1_TYPE] = "UNKNOWN"; |
| else |
| oemData[KEY_MC_CONFIG][KEY_MC_SLOT1_TYPE] = |
| pcieType[req->slot1_pcie_type]; |
| |
| if (req->slot2_pcie_type >= sizeof(pcieType) / sizeof(uint8_t*)) |
| oemData[KEY_MC_CONFIG][KEY_MC_SLOT2_TYPE] = "UNKNOWN"; |
| else |
| oemData[KEY_MC_CONFIG][KEY_MC_SLOT2_TYPE] = |
| pcieType[req->slot2_pcie_type]; |
| |
| if (req->slot3_pcie_type >= sizeof(pcieType) / sizeof(uint8_t*)) |
| oemData[KEY_MC_CONFIG][KEY_MC_SLOT3_TYPE] = "UNKNOWN"; |
| else |
| oemData[KEY_MC_CONFIG][KEY_MC_SLOT3_TYPE] = |
| pcieType[req->slot3_pcie_type]; |
| |
| if (req->slot4_pcie_type >= sizeof(pcieType) / sizeof(uint8_t*)) |
| oemData[KEY_MC_CONFIG][KEY_MC_SLOT4_TYPE] = "UNKNOWN"; |
| else |
| oemData[KEY_MC_CONFIG][KEY_MC_SLOT4_TYPE] = |
| pcieType[req->slot4_pcie_type]; |
| |
| oemData[KEY_MC_CONFIG][KEY_MC_AEP_CNT] = req->aep_mem_cnt; |
| |
| flushOemData(); |
| |
| return IPMI_CC_OK; |
| } |
| |
| //---------------------------------------------------------------------- |
| // Set POST start (CMD_OEM_SET_POST_START) |
| //---------------------------------------------------------------------- |
| ipmi_ret_t ipmiOemSetPostStart(ipmi_netfn_t netfn, ipmi_cmd_t cmd, |
| ipmi_request_t request, ipmi_response_t response, |
| ipmi_data_len_t data_len, ipmi_context_t context) |
| { |
| phosphor::logging::log<phosphor::logging::level::INFO>("POST Start Event"); |
| |
| /* Do nothing, return success */ |
| *data_len = 0; |
| return IPMI_CC_OK; |
| } |
| |
| //---------------------------------------------------------------------- |
| // Set POST End (CMD_OEM_SET_POST_END) |
| //---------------------------------------------------------------------- |
| ipmi_ret_t ipmiOemSetPostEnd(ipmi_netfn_t netfn, ipmi_cmd_t cmd, |
| ipmi_request_t request, ipmi_response_t response, |
| ipmi_data_len_t data_len, ipmi_context_t context) |
| { |
| struct timespec ts; |
| |
| phosphor::logging::log<phosphor::logging::level::INFO>("POST End Event"); |
| |
| *data_len = 0; |
| |
| // Timestamp post end time. |
| clock_gettime(CLOCK_REALTIME, &ts); |
| oemData[KEY_TS_SLED] = ts.tv_sec; |
| flushOemData(); |
| |
| // Sync time with system |
| // TODO: Add code for syncing time |
| |
| return IPMI_CC_OK; |
| } |
| |
| //---------------------------------------------------------------------- |
| // Set PPIN Info (CMD_OEM_SET_PPIN_INFO) |
| //---------------------------------------------------------------------- |
| // Inform BMC about PPIN data of 8 bytes for each CPU |
| // |
| // Request: |
| // Byte 1:8 – CPU0 PPIN data |
| // Optional: |
| // Byte 9:16 – CPU1 PPIN data |
| // |
| // Response: |
| // Byte 1 – Completion Code |
| ipmi_ret_t ipmiOemSetPPINInfo(ipmi_netfn_t netfn, ipmi_cmd_t cmd, |
| ipmi_request_t request, ipmi_response_t response, |
| ipmi_data_len_t data_len, ipmi_context_t context) |
| { |
| uint8_t* req = reinterpret_cast<uint8_t*>(request); |
| std::string ppinStr; |
| int len; |
| |
| if (*data_len > SIZE_CPU_PPIN * 2) |
| len = SIZE_CPU_PPIN * 2; |
| else |
| len = *data_len; |
| *data_len = 0; |
| |
| ppinStr = bytesToStr(req, len); |
| oemData[KEY_PPIN_INFO] = ppinStr.c_str(); |
| flushOemData(); |
| |
| return IPMI_CC_OK; |
| } |
| |
| //---------------------------------------------------------------------- |
| // Set ADR Trigger (CMD_OEM_SET_ADR_TRIGGER) |
| //---------------------------------------------------------------------- |
| ipmi_ret_t ipmiOemSetAdrTrigger(ipmi_netfn_t netfn, ipmi_cmd_t cmd, |
| ipmi_request_t request, |
| ipmi_response_t response, |
| ipmi_data_len_t data_len, |
| ipmi_context_t context) |
| { |
| /* Do nothing, return success */ |
| *data_len = 0; |
| return IPMI_CC_OK; |
| } |
| |
| // Helper function to set guid at offset in EEPROM |
| static int setGUID(off_t offset, uint8_t* guid) |
| { |
| int fd = -1; |
| ssize_t len; |
| int ret = 0; |
| |
| errno = 0; |
| |
| // Check if file is present |
| if (access(FRU_EEPROM, F_OK) == -1) |
| { |
| std::cerr << "Unable to access: " << FRU_EEPROM << std::endl; |
| return errno; |
| } |
| |
| // Open the file |
| fd = open(FRU_EEPROM, O_WRONLY); |
| if (fd == -1) |
| { |
| std::cerr << "Unable to open: " << FRU_EEPROM << std::endl; |
| return errno; |
| } |
| |
| // seek to the offset |
| lseek(fd, offset, SEEK_SET); |
| |
| // Write bytes to location |
| len = write(fd, guid, GUID_SIZE); |
| if (len != GUID_SIZE) |
| { |
| phosphor::logging::log<phosphor::logging::level::ERR>( |
| "GUID write data to EEPROM failed"); |
| ret = errno; |
| } |
| |
| close(fd); |
| return ret; |
| } |
| |
| //---------------------------------------------------------------------- |
| // Set System GUID (CMD_OEM_SET_SYSTEM_GUID) |
| //---------------------------------------------------------------------- |
| #if BIC_ENABLED |
| ipmi::RspType<> ipmiOemSetSystemGuid(ipmi::Context::ptr ctx, uint8_t cmdReq, |
| std::vector<uint8_t> reqData) |
| { |
| std::vector<uint8_t> respData; |
| |
| if (reqData.size() != GUID_SIZE) // 16bytes |
| { |
| |
| return ipmi::responseReqDataLenInvalid(); |
| } |
| |
| auto ptrReqData = reqData.insert(reqData.begin(), reqData.size()); |
| |
| uint8_t bicAddr = (uint8_t)ctx->hostIdx << 2; |
| |
| if (sendBicCmd(ctx->netFn, ctx->cmd, bicAddr, reqData, respData)) |
| return ipmi::responseUnspecifiedError(); |
| |
| return ipmi::responseSuccess(); |
| } |
| |
| #else |
| ipmi_ret_t ipmiOemSetSystemGuid(ipmi_netfn_t netfn, ipmi_cmd_t cmd, |
| ipmi_request_t request, |
| ipmi_response_t response, |
| ipmi_data_len_t data_len, |
| ipmi_context_t context) |
| { |
| uint8_t* req = reinterpret_cast<uint8_t*>(request); |
| |
| if (*data_len != GUID_SIZE) // 16bytes |
| { |
| *data_len = 0; |
| return IPMI_CC_REQ_DATA_LEN_INVALID; |
| } |
| |
| *data_len = 0; |
| |
| if (setGUID(OFFSET_SYS_GUID, req)) |
| { |
| return IPMI_CC_UNSPECIFIED_ERROR; |
| } |
| return IPMI_CC_OK; |
| } |
| #endif |
| |
| //---------------------------------------------------------------------- |
| // Set Bios Flash Info (CMD_OEM_SET_BIOS_FLASH_INFO) |
| //---------------------------------------------------------------------- |
| ipmi_ret_t ipmiOemSetBiosFlashInfo(ipmi_netfn_t netfn, ipmi_cmd_t cmd, |
| ipmi_request_t request, |
| ipmi_response_t response, |
| ipmi_data_len_t data_len, |
| ipmi_context_t context) |
| { |
| /* Do nothing, return success */ |
| *data_len = 0; |
| return IPMI_CC_OK; |
| } |
| |
| //---------------------------------------------------------------------- |
| // Set PPR (CMD_OEM_SET_PPR) |
| //---------------------------------------------------------------------- |
| ipmi_ret_t ipmiOemSetPpr(ipmi_netfn_t netfn, ipmi_cmd_t cmd, |
| ipmi_request_t request, ipmi_response_t response, |
| ipmi_data_len_t data_len, ipmi_context_t context) |
| { |
| uint8_t* req = reinterpret_cast<uint8_t*>(request); |
| uint8_t pprCnt, pprAct, pprIndex; |
| uint8_t selParam = req[0]; |
| uint8_t len = *data_len; |
| std::stringstream ss; |
| std::string str; |
| |
| *data_len = 0; |
| |
| switch (selParam) |
| { |
| case PPR_ACTION: |
| if (oemData[KEY_PPR].find(KEY_PPR_ROW_COUNT) == |
| oemData[KEY_PPR].end()) |
| return CC_PARAM_NOT_SUPP_IN_CURR_STATE; |
| |
| pprCnt = oemData[KEY_PPR][KEY_PPR_ROW_COUNT]; |
| if (pprCnt == 0) |
| return CC_PARAM_NOT_SUPP_IN_CURR_STATE; |
| |
| pprAct = req[1]; |
| /* Check if ppr is enabled or disabled */ |
| if (!(pprAct & 0x80)) |
| pprAct = 0; |
| |
| oemData[KEY_PPR][KEY_PPR_ACTION] = pprAct; |
| break; |
| case PPR_ROW_COUNT: |
| if (req[1] > 100) |
| return IPMI_CC_PARM_OUT_OF_RANGE; |
| |
| oemData[KEY_PPR][KEY_PPR_ROW_COUNT] = req[1]; |
| break; |
| case PPR_ROW_ADDR: |
| pprIndex = req[1]; |
| if (pprIndex > 100) |
| return IPMI_CC_PARM_OUT_OF_RANGE; |
| |
| if (len < PPR_ROW_ADDR_LEN + 1) |
| { |
| phosphor::logging::log<phosphor::logging::level::ERR>( |
| "Invalid PPR Row Address length received"); |
| return IPMI_CC_REQ_DATA_LEN_INVALID; |
| } |
| |
| ss << std::hex; |
| ss << std::setw(2) << std::setfill('0') << (int)pprIndex; |
| |
| oemData[KEY_PPR][ss.str()][KEY_PPR_INDEX] = pprIndex; |
| |
| str = bytesToStr(&req[1], PPR_ROW_ADDR_LEN); |
| oemData[KEY_PPR][ss.str()][KEY_PPR_ROW_ADDR] = str.c_str(); |
| break; |
| case PPR_HISTORY_DATA: |
| pprIndex = req[1]; |
| if (pprIndex > 100) |
| return IPMI_CC_PARM_OUT_OF_RANGE; |
| |
| if (len < PPR_HST_DATA_LEN + 1) |
| { |
| phosphor::logging::log<phosphor::logging::level::ERR>( |
| "Invalid PPR history data length received"); |
| return IPMI_CC_REQ_DATA_LEN_INVALID; |
| } |
| |
| ss << std::hex; |
| ss << std::setw(2) << std::setfill('0') << (int)pprIndex; |
| |
| oemData[KEY_PPR][ss.str()][KEY_PPR_INDEX] = pprIndex; |
| |
| str = bytesToStr(&req[1], PPR_HST_DATA_LEN); |
| oemData[KEY_PPR][ss.str()][KEY_PPR_HST_DATA] = str.c_str(); |
| break; |
| default: |
| return IPMI_CC_PARM_OUT_OF_RANGE; |
| break; |
| } |
| |
| flushOemData(); |
| |
| return IPMI_CC_OK; |
| } |
| |
| //---------------------------------------------------------------------- |
| // Get PPR (CMD_OEM_GET_PPR) |
| //---------------------------------------------------------------------- |
| ipmi_ret_t ipmiOemGetPpr(ipmi_netfn_t netfn, ipmi_cmd_t cmd, |
| ipmi_request_t request, ipmi_response_t response, |
| ipmi_data_len_t data_len, ipmi_context_t context) |
| { |
| uint8_t* req = reinterpret_cast<uint8_t*>(request); |
| uint8_t* res = reinterpret_cast<uint8_t*>(response); |
| uint8_t pprCnt, pprIndex; |
| uint8_t selParam = req[0]; |
| std::stringstream ss; |
| std::string str; |
| |
| /* Any failure will return zero length data */ |
| *data_len = 0; |
| |
| switch (selParam) |
| { |
| case PPR_ACTION: |
| res[0] = 0; |
| *data_len = 1; |
| |
| if (oemData[KEY_PPR].find(KEY_PPR_ROW_COUNT) != |
| oemData[KEY_PPR].end()) |
| { |
| pprCnt = oemData[KEY_PPR][KEY_PPR_ROW_COUNT]; |
| if (pprCnt != 0) |
| { |
| if (oemData[KEY_PPR].find(KEY_PPR_ACTION) != |
| oemData[KEY_PPR].end()) |
| { |
| res[0] = oemData[KEY_PPR][KEY_PPR_ACTION]; |
| } |
| } |
| } |
| break; |
| case PPR_ROW_COUNT: |
| res[0] = 0; |
| *data_len = 1; |
| if (oemData[KEY_PPR].find(KEY_PPR_ROW_COUNT) != |
| oemData[KEY_PPR].end()) |
| res[0] = oemData[KEY_PPR][KEY_PPR_ROW_COUNT]; |
| break; |
| case PPR_ROW_ADDR: |
| pprIndex = req[1]; |
| if (pprIndex > 100) |
| return IPMI_CC_PARM_OUT_OF_RANGE; |
| |
| ss << std::hex; |
| ss << std::setw(2) << std::setfill('0') << (int)pprIndex; |
| |
| if (oemData[KEY_PPR].find(ss.str()) == oemData[KEY_PPR].end()) |
| return IPMI_CC_PARM_OUT_OF_RANGE; |
| |
| if (oemData[KEY_PPR][ss.str()].find(KEY_PPR_ROW_ADDR) == |
| oemData[KEY_PPR][ss.str()].end()) |
| return IPMI_CC_PARM_OUT_OF_RANGE; |
| |
| str = oemData[KEY_PPR][ss.str()][KEY_PPR_ROW_ADDR]; |
| *data_len = strToBytes(str, res); |
| break; |
| case PPR_HISTORY_DATA: |
| pprIndex = req[1]; |
| if (pprIndex > 100) |
| return IPMI_CC_PARM_OUT_OF_RANGE; |
| |
| ss << std::hex; |
| ss << std::setw(2) << std::setfill('0') << (int)pprIndex; |
| |
| if (oemData[KEY_PPR].find(ss.str()) == oemData[KEY_PPR].end()) |
| return IPMI_CC_PARM_OUT_OF_RANGE; |
| |
| if (oemData[KEY_PPR][ss.str()].find(KEY_PPR_HST_DATA) == |
| oemData[KEY_PPR][ss.str()].end()) |
| return IPMI_CC_PARM_OUT_OF_RANGE; |
| |
| str = oemData[KEY_PPR][ss.str()][KEY_PPR_HST_DATA]; |
| *data_len = strToBytes(str, res); |
| break; |
| default: |
| return IPMI_CC_PARM_OUT_OF_RANGE; |
| break; |
| } |
| |
| return IPMI_CC_OK; |
| } |
| |
| /* FB OEM QC Commands */ |
| |
| //---------------------------------------------------------------------- |
| // Set Proc Info (CMD_OEM_Q_SET_PROC_INFO) |
| //---------------------------------------------------------------------- |
| //"Request: |
| // Byte 1:3 – Manufacturer ID – XXYYZZ h, LSB first |
| // Byte 4 – Processor Index, 0 base |
| // Byte 5 – Parameter Selector |
| // Byte 6..N – Configuration parameter data (see below for Parameters |
| // of Processor Information) |
| // Response: |
| // Byte 1 – Completion code |
| // |
| // Parameter#1: (Processor Product Name) |
| // |
| // Byte 1..48 –Product name(ASCII code) |
| // Ex. Intel(R) Xeon(R) CPU E5-2685 v3 @ 2.60GHz |
| // |
| // Param#2: Processor Basic Information |
| // Byte 1 – Core Number |
| // Byte 2 – Thread Number (LSB) |
| // Byte 3 – Thread Number (MSB) |
| // Byte 4 – Processor frequency in MHz (LSB) |
| // Byte 5 – Processor frequency in MHz (MSB) |
| // Byte 6..7 – Revision |
| // |
| ipmi_ret_t ipmiOemQSetProcInfo(ipmi_netfn_t netfn, ipmi_cmd_t cmd, |
| ipmi_request_t request, ipmi_response_t response, |
| ipmi_data_len_t data_len, ipmi_context_t context) |
| { |
| qProcInfo_t* req = reinterpret_cast<qProcInfo_t*>(request); |
| uint8_t numParam = sizeof(cpuInfoKey) / sizeof(uint8_t*); |
| std::stringstream ss; |
| std::string str; |
| uint8_t len = *data_len; |
| |
| *data_len = 0; |
| |
| /* check for requested data params */ |
| if (len < 5 || req->paramSel < 1 || req->paramSel >= numParam) |
| { |
| phosphor::logging::log<phosphor::logging::level::ERR>( |
| "Invalid parameter received"); |
| return IPMI_CC_PARM_OUT_OF_RANGE; |
| } |
| |
| len = len - 5; // Get Actual data length |
| |
| ss << std::hex; |
| ss << std::setw(2) << std::setfill('0') << (int)req->procIndex; |
| oemData[KEY_Q_PROC_INFO][ss.str()][KEY_PROC_INDEX] = req->procIndex; |
| |
| str = bytesToStr(req->data, len); |
| oemData[KEY_Q_PROC_INFO][ss.str()][cpuInfoKey[req->paramSel]] = str.c_str(); |
| flushOemData(); |
| |
| return IPMI_CC_OK; |
| } |
| |
| //---------------------------------------------------------------------- |
| // Get Proc Info (CMD_OEM_Q_GET_PROC_INFO) |
| //---------------------------------------------------------------------- |
| // Request: |
| // Byte 1:3 – Manufacturer ID – XXYYZZ h, LSB first |
| // Byte 4 – Processor Index, 0 base |
| // Byte 5 – Parameter Selector |
| // Response: |
| // Byte 1 – Completion code |
| // Byte 2..N – Configuration Parameter Data (see below for Parameters |
| // of Processor Information) |
| // |
| // Parameter#1: (Processor Product Name) |
| // |
| // Byte 1..48 –Product name(ASCII code) |
| // Ex. Intel(R) Xeon(R) CPU E5-2685 v3 @ 2.60GHz |
| // |
| // Param#2: Processor Basic Information |
| // Byte 1 – Core Number |
| // Byte 2 – Thread Number (LSB) |
| // Byte 3 – Thread Number (MSB) |
| // Byte 4 – Processor frequency in MHz (LSB) |
| // Byte 5 – Processor frequency in MHz (MSB) |
| // Byte 6..7 – Revision |
| // |
| ipmi_ret_t ipmiOemQGetProcInfo(ipmi_netfn_t netfn, ipmi_cmd_t cmd, |
| ipmi_request_t request, ipmi_response_t response, |
| ipmi_data_len_t data_len, ipmi_context_t context) |
| { |
| qProcInfo_t* req = reinterpret_cast<qProcInfo_t*>(request); |
| uint8_t numParam = sizeof(cpuInfoKey) / sizeof(uint8_t*); |
| uint8_t* res = reinterpret_cast<uint8_t*>(response); |
| std::stringstream ss; |
| std::string str; |
| |
| *data_len = 0; |
| |
| /* check for requested data params */ |
| if (req->paramSel < 1 || req->paramSel >= numParam) |
| { |
| phosphor::logging::log<phosphor::logging::level::ERR>( |
| "Invalid parameter received"); |
| return IPMI_CC_PARM_OUT_OF_RANGE; |
| } |
| |
| ss << std::hex; |
| ss << std::setw(2) << std::setfill('0') << (int)req->procIndex; |
| |
| if (oemData[KEY_Q_PROC_INFO].find(ss.str()) == |
| oemData[KEY_Q_PROC_INFO].end()) |
| return CC_PARAM_NOT_SUPP_IN_CURR_STATE; |
| |
| if (oemData[KEY_Q_PROC_INFO][ss.str()].find(cpuInfoKey[req->paramSel]) == |
| oemData[KEY_Q_PROC_INFO][ss.str()].end()) |
| return CC_PARAM_NOT_SUPP_IN_CURR_STATE; |
| |
| str = oemData[KEY_Q_PROC_INFO][ss.str()][cpuInfoKey[req->paramSel]]; |
| *data_len = strToBytes(str, res); |
| |
| return IPMI_CC_OK; |
| } |
| |
| //---------------------------------------------------------------------- |
| // Set Dimm Info (CMD_OEM_Q_SET_DIMM_INFO) |
| //---------------------------------------------------------------------- |
| // Request: |
| // Byte 1:3 – Manufacturer ID – XXYYZZh, LSB first |
| // Byte 4 – DIMM Index, 0 base |
| // Byte 5 – Parameter Selector |
| // Byte 6..N – Configuration parameter data (see below for Parameters |
| // of DIMM Information) |
| // Response: |
| // Byte 1 – Completion code |
| // |
| // Param#1 (DIMM Location): |
| // Byte 1 – DIMM Present |
| // Byte 1 – DIMM Present |
| // 01h – Present |
| // FFh – Not Present |
| // Byte 2 – Node Number, 0 base |
| // Byte 3 – Channel Number , 0 base |
| // Byte 4 – DIMM Number , 0 base |
| // |
| // Param#2 (DIMM Type): |
| // Byte 1 – DIMM Type |
| // Bit [7:6] |
| // For DDR3 |
| // 00 – Normal Voltage (1.5V) |
| // 01 – Ultra Low Voltage (1.25V) |
| // 10 – Low Voltage (1.35V) |
| // 11 – Reserved |
| // For DDR4 |
| // 00 – Reserved |
| // 01 – Reserved |
| // 10 – Reserved |
| // 11 – Normal Voltage (1.2V) |
| // Bit [5:0] |
| // 0x00 – SDRAM |
| // 0x01 – DDR-1 RAM |
| // 0x02 – Rambus |
| // 0x03 – DDR-2 RAM |
| // 0x04 – FBDIMM |
| // 0x05 – DDR-3 RAM |
| // 0x06 – DDR-4 RAM |
| // |
| // Param#3 (DIMM Speed): |
| // Byte 1..2 – DIMM speed in MHz, LSB |
| // Byte 3..6 – DIMM size in Mbytes, LSB |
| // |
| // Param#4 (Module Part Number): |
| // Byte 1..20 –Module Part Number (JEDEC Standard No. 21-C) |
| // |
| // Param#5 (Module Serial Number): |
| // Byte 1..4 –Module Serial Number (JEDEC Standard No. 21-C) |
| // |
| // Param#6 (Module Manufacturer ID): |
| // Byte 1 - Module Manufacturer ID, LSB |
| // Byte 2 - Module Manufacturer ID, MSB |
| // |
| ipmi_ret_t ipmiOemQSetDimmInfo(ipmi_netfn_t netfn, ipmi_cmd_t cmd, |
| ipmi_request_t request, ipmi_response_t response, |
| ipmi_data_len_t data_len, ipmi_context_t context) |
| { |
| qDimmInfo_t* req = reinterpret_cast<qDimmInfo_t*>(request); |
| uint8_t numParam = sizeof(dimmInfoKey) / sizeof(uint8_t*); |
| std::stringstream ss; |
| std::string str; |
| uint8_t len = *data_len; |
| |
| *data_len = 0; |
| |
| /* check for requested data params */ |
| if (len < 5 || req->paramSel < 1 || req->paramSel >= numParam) |
| { |
| phosphor::logging::log<phosphor::logging::level::ERR>( |
| "Invalid parameter received"); |
| return IPMI_CC_PARM_OUT_OF_RANGE; |
| } |
| |
| len = len - 5; // Get Actual data length |
| |
| ss << std::hex; |
| ss << std::setw(2) << std::setfill('0') << (int)req->dimmIndex; |
| oemData[KEY_Q_DIMM_INFO][ss.str()][KEY_DIMM_INDEX] = req->dimmIndex; |
| |
| str = bytesToStr(req->data, len); |
| oemData[KEY_Q_DIMM_INFO][ss.str()][dimmInfoKey[req->paramSel]] = |
| str.c_str(); |
| flushOemData(); |
| |
| return IPMI_CC_OK; |
| } |
| |
| //---------------------------------------------------------------------- |
| // Get Dimm Info (CMD_OEM_Q_GET_DIMM_INFO) |
| //---------------------------------------------------------------------- |
| // Request: |
| // Byte 1:3 – Manufacturer ID – XXYYZZh, LSB first |
| // Byte 4 – DIMM Index, 0 base |
| // Byte 5 – Parameter Selector |
| // Byte 6..N – Configuration parameter data (see below for Parameters |
| // of DIMM Information) |
| // Response: |
| // Byte 1 – Completion code |
| // Byte 2..N – Configuration Parameter Data (see Table_1213h Parameters |
| // of DIMM Information) |
| // |
| // Param#1 (DIMM Location): |
| // Byte 1 – DIMM Present |
| // Byte 1 – DIMM Present |
| // 01h – Present |
| // FFh – Not Present |
| // Byte 2 – Node Number, 0 base |
| // Byte 3 – Channel Number , 0 base |
| // Byte 4 – DIMM Number , 0 base |
| // |
| // Param#2 (DIMM Type): |
| // Byte 1 – DIMM Type |
| // Bit [7:6] |
| // For DDR3 |
| // 00 – Normal Voltage (1.5V) |
| // 01 – Ultra Low Voltage (1.25V) |
| // 10 – Low Voltage (1.35V) |
| // 11 – Reserved |
| // For DDR4 |
| // 00 – Reserved |
| // 01 – Reserved |
| // 10 – Reserved |
| // 11 – Normal Voltage (1.2V) |
| // Bit [5:0] |
| // 0x00 – SDRAM |
| // 0x01 – DDR-1 RAM |
| // 0x02 – Rambus |
| // 0x03 – DDR-2 RAM |
| // 0x04 – FBDIMM |
| // 0x05 – DDR-3 RAM |
| // 0x06 – DDR-4 RAM |
| // |
| // Param#3 (DIMM Speed): |
| // Byte 1..2 – DIMM speed in MHz, LSB |
| // Byte 3..6 – DIMM size in Mbytes, LSB |
| // |
| // Param#4 (Module Part Number): |
| // Byte 1..20 –Module Part Number (JEDEC Standard No. 21-C) |
| // |
| // Param#5 (Module Serial Number): |
| // Byte 1..4 –Module Serial Number (JEDEC Standard No. 21-C) |
| // |
| // Param#6 (Module Manufacturer ID): |
| // Byte 1 - Module Manufacturer ID, LSB |
| // Byte 2 - Module Manufacturer ID, MSB |
| // |
| ipmi_ret_t ipmiOemQGetDimmInfo(ipmi_netfn_t netfn, ipmi_cmd_t cmd, |
| ipmi_request_t request, ipmi_response_t response, |
| ipmi_data_len_t data_len, ipmi_context_t context) |
| { |
| qDimmInfo_t* req = reinterpret_cast<qDimmInfo_t*>(request); |
| uint8_t numParam = sizeof(dimmInfoKey) / sizeof(uint8_t*); |
| uint8_t* res = reinterpret_cast<uint8_t*>(response); |
| std::stringstream ss; |
| std::string str; |
| |
| *data_len = 0; |
| |
| /* check for requested data params */ |
| if (req->paramSel < 1 || req->paramSel >= numParam) |
| { |
| phosphor::logging::log<phosphor::logging::level::ERR>( |
| "Invalid parameter received"); |
| return IPMI_CC_PARM_OUT_OF_RANGE; |
| } |
| |
| ss << std::hex; |
| ss << std::setw(2) << std::setfill('0') << (int)req->dimmIndex; |
| |
| if (oemData[KEY_Q_DIMM_INFO].find(ss.str()) == |
| oemData[KEY_Q_DIMM_INFO].end()) |
| return CC_PARAM_NOT_SUPP_IN_CURR_STATE; |
| |
| if (oemData[KEY_Q_DIMM_INFO][ss.str()].find(dimmInfoKey[req->paramSel]) == |
| oemData[KEY_Q_DIMM_INFO][ss.str()].end()) |
| return CC_PARAM_NOT_SUPP_IN_CURR_STATE; |
| |
| str = oemData[KEY_Q_DIMM_INFO][ss.str()][dimmInfoKey[req->paramSel]]; |
| *data_len = strToBytes(str, res); |
| |
| return IPMI_CC_OK; |
| } |
| |
| //---------------------------------------------------------------------- |
| // Set Drive Info (CMD_OEM_Q_SET_DRIVE_INFO) |
| //---------------------------------------------------------------------- |
| // BIOS issue this command to provide HDD information to BMC. |
| // |
| // BIOS just can get information by standard ATA / SMART command for |
| // OB SATA controller. |
| // BIOS can get |
| // 1. Serial Number |
| // 2. Model Name |
| // 3. HDD FW Version |
| // 4. HDD Capacity |
| // 5. HDD WWN |
| // |
| // Use Get HDD info Param #5 to know the MAX HDD info index. |
| // |
| // Request: |
| // Byte 1:3 – Quanta Manufacturer ID – 001C4Ch, LSB first |
| // Byte 4 – |
| // [7:4] Reserved |
| // [3:0] HDD Controller Type |
| // 0x00 – BIOS |
| // 0x01 – Expander |
| // 0x02 – LSI |
| // Byte 5 – HDD Info Index, 0 base |
| // Byte 6 – Parameter Selector |
| // Byte 7..N – Configuration parameter data (see Table_1415h Parameters of HDD |
| // Information) |
| // |
| // Response: |
| // Byte 1 – Completion Code |
| // |
| // Param#0 (HDD Location): |
| // Byte 1 – Controller |
| // [7:3] Device Number |
| // [2:0] Function Number |
| // For Intel C610 series (Wellsburg) |
| // D31:F2 (0xFA) – SATA control 1 |
| // D31:F5 (0xFD) – SATA control 2 |
| // D17:F4 (0x8C) – sSata control |
| // Byte 2 – Port Number |
| // Byte 3 – Location (0xFF: No HDD Present) |
| // BIOS default set Byte 3 to 0xFF, if No HDD Present. And then skip send param |
| // #1~4, #6, #7 to BMC (still send param #5) BIOS default set Byte 3 to 0, if |
| // the HDD present. BMC or other people who know the HDD location has |
| // responsibility for update Location info |
| // |
| // Param#1 (Serial Number): |
| // Bytes 1..33: HDD Serial Number |
| // |
| // Param#2 (Model Name): |
| // Byte 1..33 – HDD Model Name |
| // |
| // Param#3 (HDD FW Version): |
| // Byte 1..17 –HDD FW version |
| // |
| // Param#4 (Capacity): |
| // Byte 1..4 –HDD Block Size, LSB |
| // Byte 5..12 - HDD Block Number, LSB |
| // HDD Capacity = HDD Block size * HDD BLock number (Unit Byte) |
| // |
| // Param#5 (Max HDD Quantity): |
| // Byte 1 - Max HDD Quantity |
| // Max supported port numbers in this PCH |
| // |
| // Param#6 (HDD Type) |
| // Byte 1 – HDD Type |
| // 0h – Reserved |
| // 1h – SAS |
| // 2h – SATA |
| // 3h – PCIE SSD (NVME) |
| // |
| // Param#7 (HDD WWN) |
| // Data 1...8: HDD World Wide Name, LSB |
| // |
| ipmi_ret_t ipmiOemQSetDriveInfo(ipmi_netfn_t netfn, ipmi_cmd_t cmd, |
| ipmi_request_t request, |
| ipmi_response_t response, |
| ipmi_data_len_t data_len, |
| ipmi_context_t context) |
| { |
| qDriveInfo_t* req = reinterpret_cast<qDriveInfo_t*>(request); |
| uint8_t numParam = sizeof(driveInfoKey) / sizeof(uint8_t*); |
| uint8_t ctrlType = req->hddCtrlType & 0x0f; |
| std::stringstream ss; |
| std::string str; |
| uint8_t len = *data_len; |
| |
| *data_len = 0; |
| |
| /* check for requested data params */ |
| if (len < 6 || req->paramSel < 1 || req->paramSel >= numParam || |
| ctrlType > 2) |
| { |
| phosphor::logging::log<phosphor::logging::level::ERR>( |
| "Invalid parameter received"); |
| return IPMI_CC_PARM_OUT_OF_RANGE; |
| } |
| |
| len = len - 6; // Get Actual data length |
| |
| ss << std::hex; |
| ss << std::setw(2) << std::setfill('0') << (int)req->hddIndex; |
| oemData[KEY_Q_DRIVE_INFO][KEY_HDD_CTRL_TYPE] = req->hddCtrlType; |
| oemData[KEY_Q_DRIVE_INFO][ctrlTypeKey[ctrlType]][ss.str()][KEY_HDD_INDEX] = |
| req->hddIndex; |
| |
| str = bytesToStr(req->data, len); |
| oemData[KEY_Q_DRIVE_INFO][ctrlTypeKey[ctrlType]][ss.str()] |
| [driveInfoKey[req->paramSel]] = str.c_str(); |
| flushOemData(); |
| |
| return IPMI_CC_OK; |
| } |
| |
| //---------------------------------------------------------------------- |
| // Get Drive Info (CMD_OEM_Q_GET_DRIVE_INFO) |
| //---------------------------------------------------------------------- |
| // BMC needs to check HDD presented or not first. If NOT presented, return |
| // completion code 0xD5. |
| // |
| // Request: |
| // Byte 1:3 – Quanta Manufacturer ID – 001C4Ch, LSB first |
| // Byte 4 – |
| //[7:4] Reserved |
| //[3:0] HDD Controller Type |
| // 0x00 – BIOS |
| // 0x01 – Expander |
| // 0x02 – LSI |
| // Byte 5 – HDD Index, 0 base |
| // Byte 6 – Parameter Selector (See Above Set HDD Information) |
| // Response: |
| // Byte 1 – Completion Code |
| // 0xD5 – Not support in current status (HDD Not Present) |
| // Byte 2..N – Configuration parameter data (see Table_1415h Parameters of HDD |
| // Information) |
| // |
| ipmi_ret_t ipmiOemQGetDriveInfo(ipmi_netfn_t netfn, ipmi_cmd_t cmd, |
| ipmi_request_t request, |
| ipmi_response_t response, |
| ipmi_data_len_t data_len, |
| ipmi_context_t context) |
| { |
| qDriveInfo_t* req = reinterpret_cast<qDriveInfo_t*>(request); |
| uint8_t numParam = sizeof(driveInfoKey) / sizeof(uint8_t*); |
| uint8_t* res = reinterpret_cast<uint8_t*>(response); |
| uint8_t ctrlType = req->hddCtrlType & 0x0f; |
| std::stringstream ss; |
| std::string str; |
| |
| *data_len = 0; |
| |
| /* check for requested data params */ |
| if (req->paramSel < 1 || req->paramSel >= numParam || ctrlType > 2) |
| { |
| phosphor::logging::log<phosphor::logging::level::ERR>( |
| "Invalid parameter received"); |
| return IPMI_CC_PARM_OUT_OF_RANGE; |
| } |
| |
| if (oemData[KEY_Q_DRIVE_INFO].find(ctrlTypeKey[ctrlType]) == |
| oemData[KEY_Q_DRIVE_INFO].end()) |
| return CC_PARAM_NOT_SUPP_IN_CURR_STATE; |
| |
| ss << std::hex; |
| ss << std::setw(2) << std::setfill('0') << (int)req->hddIndex; |
| |
| if (oemData[KEY_Q_DRIVE_INFO][ctrlTypeKey[ctrlType]].find(ss.str()) == |
| oemData[KEY_Q_DRIVE_INFO].end()) |
| return CC_PARAM_NOT_SUPP_IN_CURR_STATE; |
| |
| if (oemData[KEY_Q_DRIVE_INFO][ctrlTypeKey[ctrlType]][ss.str()].find( |
| dimmInfoKey[req->paramSel]) == |
| oemData[KEY_Q_DRIVE_INFO][ss.str()].end()) |
| return CC_PARAM_NOT_SUPP_IN_CURR_STATE; |
| |
| str = oemData[KEY_Q_DRIVE_INFO][ctrlTypeKey[ctrlType]][ss.str()] |
| [dimmInfoKey[req->paramSel]]; |
| *data_len = strToBytes(str, res); |
| |
| return IPMI_CC_OK; |
| } |
| |
| /* Helper function for sending DCMI commands to ME and getting response back */ |
| ipmi::RspType<std::vector<uint8_t>> sendDCMICmd(uint8_t cmd, |
| std::vector<uint8_t>& cmdData) |
| { |
| std::vector<uint8_t> respData; |
| |
| /* Add group id as first byte to request for ME command */ |
| cmdData.insert(cmdData.begin(), groupDCMI); |
| |
| if (sendMeCmd(ipmi::netFnGroup, cmd, cmdData, respData)) |
| return ipmi::responseUnspecifiedError(); |
| |
| /* Remove group id as first byte as it will be added by IPMID */ |
| respData.erase(respData.begin()); |
| |
| return ipmi::responseSuccess(std::move(respData)); |
| } |
| |
| /* DCMI Command handellers. */ |
| |
| ipmi::RspType<std::vector<uint8_t>> |
| ipmiOemDCMIGetPowerReading(std::vector<uint8_t> reqData) |
| { |
| return sendDCMICmd(ipmi::dcmi::cmdGetPowerReading, reqData); |
| } |
| |
| ipmi::RspType<std::vector<uint8_t>> |
| ipmiOemDCMIGetPowerLimit(std::vector<uint8_t> reqData) |
| { |
| return sendDCMICmd(ipmi::dcmi::cmdGetPowerLimit, reqData); |
| } |
| |
| ipmi::RspType<std::vector<uint8_t>> |
| ipmiOemDCMISetPowerLimit(std::vector<uint8_t> reqData) |
| { |
| return sendDCMICmd(ipmi::dcmi::cmdSetPowerLimit, reqData); |
| } |
| |
| ipmi::RspType<std::vector<uint8_t>> |
| ipmiOemDCMIApplyPowerLimit(std::vector<uint8_t> reqData) |
| { |
| return sendDCMICmd(ipmi::dcmi::cmdActDeactivatePwrLimit, reqData); |
| } |
| |
| static void registerOEMFunctions(void) |
| { |
| /* Get OEM data from json file */ |
| std::ifstream file(JSON_OEM_DATA_FILE); |
| if (file) |
| { |
| file >> oemData; |
| file.close(); |
| } |
| |
| phosphor::logging::log<phosphor::logging::level::INFO>( |
| "Registering OEM commands"); |
| |
| ipmiPrintAndRegister(NETFN_OEM_USB_DBG_REQ, CMD_OEM_USB_DBG_GET_FRAME_INFO, |
| NULL, ipmiOemDbgGetFrameInfo, |
| PRIVILEGE_USER); // get debug frame info |
| ipmiPrintAndRegister(NETFN_OEM_USB_DBG_REQ, |
| CMD_OEM_USB_DBG_GET_UPDATED_FRAMES, NULL, |
| ipmiOemDbgGetUpdFrames, |
| PRIVILEGE_USER); // get debug updated frames |
| ipmiPrintAndRegister(NETFN_OEM_USB_DBG_REQ, CMD_OEM_USB_DBG_GET_POST_DESC, |
| NULL, ipmiOemDbgGetPostDesc, |
| PRIVILEGE_USER); // get debug post description |
| ipmiPrintAndRegister(NETFN_OEM_USB_DBG_REQ, CMD_OEM_USB_DBG_GET_GPIO_DESC, |
| NULL, ipmiOemDbgGetGpioDesc, |
| PRIVILEGE_USER); // get debug gpio description |
| ipmiPrintAndRegister(NETFN_OEM_USB_DBG_REQ, CMD_OEM_USB_DBG_GET_FRAME_DATA, |
| NULL, ipmiOemDbgGetFrameData, |
| PRIVILEGE_USER); // get debug frame data |
| ipmiPrintAndRegister(NETFN_OEM_USB_DBG_REQ, CMD_OEM_USB_DBG_CTRL_PANEL, |
| NULL, ipmiOemDbgGetCtrlPanel, |
| PRIVILEGE_USER); // get debug control panel |
| ipmiPrintAndRegister(NETFUN_NONE, CMD_OEM_SET_DIMM_INFO, NULL, |
| ipmiOemSetDimmInfo, |
| PRIVILEGE_USER); // Set Dimm Info |
| ipmiPrintAndRegister(NETFUN_NONE, CMD_OEM_GET_BOARD_ID, NULL, |
| ipmiOemGetBoardID, |
| PRIVILEGE_USER); // Get Board ID |
| ipmiPrintAndRegister(NETFUN_NONE, CMD_OEM_SET_MACHINE_CONFIG_INFO, NULL, |
| ipmiOemSetMachineCfgInfo, |
| PRIVILEGE_USER); // Set Machine Config Info |
| ipmiPrintAndRegister(NETFUN_NONE, CMD_OEM_SET_POST_START, NULL, |
| ipmiOemSetPostStart, |
| PRIVILEGE_USER); // Set POST start |
| ipmiPrintAndRegister(NETFUN_NONE, CMD_OEM_SET_POST_END, NULL, |
| ipmiOemSetPostEnd, |
| PRIVILEGE_USER); // Set POST End |
| ipmiPrintAndRegister(NETFUN_NONE, CMD_OEM_SET_PPIN_INFO, NULL, |
| ipmiOemSetPPINInfo, |
| PRIVILEGE_USER); // Set PPIN Info |
| #if BIC_ENABLED |
| |
| ipmi::registerHandler(ipmi::prioOpenBmcBase, ipmi::netFnOemOne, |
| ipmi::cmdSetSystemGuid, ipmi::Privilege::User, |
| ipmiOemSetSystemGuid); |
| #else |
| |
| ipmiPrintAndRegister(NETFUN_NONE, CMD_OEM_SET_SYSTEM_GUID, NULL, |
| ipmiOemSetSystemGuid, |
| PRIVILEGE_USER); // Set System GUID |
| #endif |
| ipmiPrintAndRegister(NETFUN_NONE, CMD_OEM_SET_ADR_TRIGGER, NULL, |
| ipmiOemSetAdrTrigger, |
| PRIVILEGE_USER); // Set ADR Trigger |
| ipmiPrintAndRegister(NETFUN_NONE, CMD_OEM_SET_BIOS_FLASH_INFO, NULL, |
| ipmiOemSetBiosFlashInfo, |
| PRIVILEGE_USER); // Set Bios Flash Info |
| ipmiPrintAndRegister(NETFUN_NONE, CMD_OEM_SET_PPR, NULL, ipmiOemSetPpr, |
| PRIVILEGE_USER); // Set PPR |
| ipmiPrintAndRegister(NETFUN_NONE, CMD_OEM_GET_PPR, NULL, ipmiOemGetPpr, |
| PRIVILEGE_USER); // Get PPR |
| /* FB OEM QC Commands */ |
| ipmiPrintAndRegister(NETFUN_FB_OEM_QC, CMD_OEM_Q_SET_PROC_INFO, NULL, |
| ipmiOemQSetProcInfo, |
| PRIVILEGE_USER); // Set Proc Info |
| ipmiPrintAndRegister(NETFUN_FB_OEM_QC, CMD_OEM_Q_GET_PROC_INFO, NULL, |
| ipmiOemQGetProcInfo, |
| PRIVILEGE_USER); // Get Proc Info |
| ipmiPrintAndRegister(NETFUN_FB_OEM_QC, CMD_OEM_Q_SET_DIMM_INFO, NULL, |
| ipmiOemQSetDimmInfo, |
| PRIVILEGE_USER); // Set Dimm Info |
| ipmiPrintAndRegister(NETFUN_FB_OEM_QC, CMD_OEM_Q_GET_DIMM_INFO, NULL, |
| ipmiOemQGetDimmInfo, |
| PRIVILEGE_USER); // Get Dimm Info |
| ipmiPrintAndRegister(NETFUN_FB_OEM_QC, CMD_OEM_Q_SET_DRIVE_INFO, NULL, |
| ipmiOemQSetDriveInfo, |
| PRIVILEGE_USER); // Set Drive Info |
| ipmiPrintAndRegister(NETFUN_FB_OEM_QC, CMD_OEM_Q_GET_DRIVE_INFO, NULL, |
| ipmiOemQGetDriveInfo, |
| PRIVILEGE_USER); // Get Drive Info |
| |
| /* FB OEM DCMI Commands as per DCMI spec 1.5 Section 6 */ |
| ipmi::registerGroupHandler(ipmi::prioOpenBmcBase, groupDCMI, |
| ipmi::dcmi::cmdGetPowerReading, |
| ipmi::Privilege::User, |
| ipmiOemDCMIGetPowerReading); // Get Power Reading |
| |
| ipmi::registerGroupHandler(ipmi::prioOpenBmcBase, groupDCMI, |
| ipmi::dcmi::cmdGetPowerLimit, |
| ipmi::Privilege::User, |
| ipmiOemDCMIGetPowerLimit); // Get Power Limit |
| |
| ipmi::registerGroupHandler(ipmi::prioOpenBmcBase, groupDCMI, |
| ipmi::dcmi::cmdSetPowerLimit, |
| ipmi::Privilege::Operator, |
| ipmiOemDCMISetPowerLimit); // Set Power Limit |
| |
| ipmi::registerGroupHandler(ipmi::prioOpenBmcBase, groupDCMI, |
| ipmi::dcmi::cmdActDeactivatePwrLimit, |
| ipmi::Privilege::Operator, |
| ipmiOemDCMIApplyPowerLimit); // Apply Power Limit |
| |
| /* FB OEM BOOT ORDER COMMANDS */ |
| ipmi::registerHandler(ipmi::prioOpenBmcBase, ipmi::netFnOemOne, |
| CMD_OEM_GET_BOOT_ORDER, ipmi::Privilege::User, |
| ipmiOemGetBootOrder); // Get Boot Order |
| |
| ipmi::registerHandler(ipmi::prioOpenBmcBase, ipmi::netFnOemOne, |
| CMD_OEM_SET_BOOT_ORDER, ipmi::Privilege::User, |
| ipmiOemSetBootOrder); // Set Boot Order |
| |
| return; |
| } |
| |
| } // namespace ipmi |