meta-gbs/recipes-bsp/images/npcm7xx-igps-native/BootBlockAndHeader_GBS.xml - openbmc/meta-quanta - Gitiles

 <!-- SPDX-License-Identifier: GPL-2.0
 #
 # Nuvoton IGPS: Image Generation And Programming Scripts For Poleg BMC
 #
 # Copyright (C) 2018 Nuvoton Technologies, All Rights Reserved
 #--------------------------------------------------------------------------->

 <?xml version="1.0" encoding="UTF-8"?>

 <Bin_Ecc_Map>
 	<!-- BMC mandatory fields -->
 	<ImageProperties>
 		<BinSize>0</BinSize>         <!-- If 0 the binary size will be calculated by the tool -->
 		<PadValue>0xFF</PadValue>	<!-- Byte value to pad the empty areas, default is 0 -->
 	</ImageProperties>

 	<BinField>
 		<!-- BootBlock tag (0x50 0x07 0x55 0xAA 0x54 0x4F 0x4F 0x42) or
 			     uboot tag (0x55 0x42 0x4F 0x4F 0x54 0x42 0x4C 0x4B) -->
 		<name>StartTag</name>         <!-- name of field -->
 		<config>
 			<offset>0</offset>
 			<size>0x8</size>
 		</config>
 		<content format='bytes'>0x50 0x07 0x55 0xAA 0x54 0x4F 0x4F 0x42</content>  <!-- content the user should fill -->
 	</BinField>

 	<BinField>
 		<!-- Code destination address, 32-bit aligned: for BootBlock should be 0xFFFD5E00 so code will run in 0xFFFD6000 as linked for -->
 		<name>DestAddr</name>         <!-- name of field -->
 		<config>
 			<offset>0x140</offset>
 			<size>0x4</size>
 		</config>
 		<content format='32bit'>0xFFFD5E00</content>     <!-- content the user should fill -->
 	</BinField>

 	<BinField>
 		<!-- BootBlock or u-boot Code size -->
 		<name>CodeSize</name>         <!-- name of field -->
 		<config>
 			<offset>0x144</offset>
 			<size>0x4</size>
 		</config>
 		<content format='FileSize'>Poleg_bootblock.bin</content>	<!-- content the user should fill -->
 	</BinField>

 	<BinField>
 		<!-- The BootBlock or u-boot binary file -->
 		<name>Code</name>             <!-- name of field -->
 		<config>
 			<offset>0x200</offset>
 			<size format='FileSize'>Poleg_bootblock.bin</size>                 <!-- size in the header calculated by tool-->
 		</config>
 		<content format='FileContent'>Poleg_bootblock.bin</content>  <!-- content the user should fill -->
 	</BinField>

 	<!-- BMC optional fields -->
 	<BinField>
 		<!-- Word contents copied by ROM code to FIU0 FIU_DRD_CFG register -->
 		<name>FIU0_DRD_CFG_Set</name>  <!-- name of field -->
 		<config>
 			<offset>0x108</offset>
 			<size>0x4</size>
 		</config>
 		<content format='32bit'>0x0300100B</content>               <!-- content the user should fill -->
 	</BinField>

 	<BinField>
 		<!-- Defines the clock divide ratio from AHB to FIU0 clock -->
 		<name>FIU_Clk_Divider</name>  <!-- name of field -->
 		<config>
 			<offset>0x10C</offset>
 			<size>0x1</size>
 		</config>
 		<content format='bytes'>0x0A</content>               <!-- content the user should fill -->
 	</BinField>

 	<BinField>
 		<!-- Version (Major.Minor) -->
 		<name>Version</name>          <!-- name of field -->
 		<config>
 			<offset>0x148</offset>
 			<size>0x4</size>
 		</config>
 		<content format='32bit'>0x0201</content>               <!-- content the user should fill -->
 	</BinField>

 	<BinField>
 		<!-- Board manufaturer ( Dell = 0, Nuvoton = 100, Google = 1, MS = 2) -->
 		<name>BOARD_VENDOR</name>          <!-- name of field -->
 		<config>
 			<offset>0x14C</offset>
 			<size>0x4</size>
 		</config>
 		<content format='32bit'>100</content>                              <!--Board_manufacturer: Nuvoton-->
 	</BinField>
 	<BinField>
 		<!-- Board type ( DRB = 0, SVB = 1, EB = 2,HORIZON = 3, SANDSTORM = 4, ROCKAWAY = 100 RunBMC = 10) -->
 		<!-- WARNING: Currently this value is only printed to serial. Set BOARD_VENDOR to 1 get Dell specific customization. -->
 		<name>BOARD_TYPE</name>          <!-- name of field -->
 		<config>
 			<offset>0x150</offset>
 			<size>0x4</size>
 		</config>
 		<content format='32bit'>0x64</content>                                   <!--Board_type: EB-->
 	</BinField>

 	<!-- the next two fields are available since version 10.7.0 -->
 	<BinField>
 		<!-- supported values: 333,444,500,600,666,700,720,750,775,787,800,825,850,900,950,1000,1060 -->
 		<name>MC_FREQ_IN_MHZ</name>          <!-- name of field -->
 		<config>
 			<offset>0x11C</offset>
 			<size>0x2</size>
 		</config>
 		<content format='32bit'>800</content>
 	</BinField>
 	<BinField>
 		<!-- supporeted values: 333,500,600,666,700,720,750,800,825,850,900,950,1000,1060 -->
 		<name>CPU_FREQ_IN_MHZ</name>          <!-- name of field -->
 		<config>
 			<offset>0x154</offset>
 			<size>0x2</size>
 		</config>
 		<content format='32bit'>800</content>
 	</BinField>

 	<BinField>
 		<!-- MC_CONFIG.
 			Bit 0: MC_DISABLE_CAPABILITY_INPUT_DQS_ENHANCE_TRAINING (0x01)
 			Bit 1:  MC_CAPABILITY_IGNORE_ECC_DEVICE         (0x02) -->
 		<name>MC_CONFIG</name>          <!-- name of field -->
 		<config>
 			<offset>0x156</offset>
 			<size>0x1</size>
 		</config>
 		<content format='32bit'>0x01</content>
 	</BinField>

 	<BinField>
 		<!-- HOST_IF.
 			0xFF: LPC backward compatible
 			0x00: LPC.
 			0x01: eSPI
 			0x02: GPIOs TRIS.  -->
 		<name>HOST_IF</name>          <!-- name of field -->
 		<config>
 			<offset>0x157</offset>
 			<size>0x1</size>
 		</config>
 		<content format='32bit'>0x00</content>
 	</BinField>

 	<BinField>
 		<!-- SECURITY_LEVEL_T.
 			0xFF: SECURITY_LEVEL_UNKNOWN: backward compatible
 			0x00: SECURITY_LEVEL_NONE.
 			0x01: SECURITY_LEVEL_STANDARD
 			0x02: SECURITY_LEVEL_NIST. (require BootBlock with NIST support) -->
 		<name>SECURITY_LEVEL_T</name>          <!-- name of field -->
 		<config>
 			<offset>0x15C</offset>
 			<size>0x1</size>
 		</config>
 		<content format='32bit'>0xFF</content>
 	</BinField>

 	<BinField>
 		<!-- Key revoke (bitwise). Set bit 0 to revoke key 0 etc. -->
 		<name>SECURITY_REVOKE_KEYS</name>          <!-- name of field -->
 		<config>
 			<offset>0x1D7</offset>
 			<size>0x1</size>
 		</config>
 		<content format='bytes'>0x00</content>
 	</BinField>

 	<BinField>
 		<!-- security log offset -->
 		<name>SECURITY_LOG</name>          <!-- name of field -->
 		<config>
 			<offset>0x1D8</offset>
 			<size>0x4</size>
 		</config>
 		<content format='32bit'>0x090000</content>
 	</BinField>
 	<BinField>
 		<!-- hole 0 size: used for NIST security. -->
 		<name>SECURITY_LOG_SIZE</name>          <!-- name of field -->
 		<config>
 			<offset>0x1DC</offset>
 			<size>0x4</size>
 		</config>
 		<content format='32bit'>0x3000</content>
 	</BinField>


 	<BinField>
 		<!-- hole 0: used for NIST security. -->
 		<name>HOLE0</name>          <!-- name of field -->
 		<config>
 			<offset>0x1E0</offset>
 			<size>0x4</size>
 		</config>
 		<content format='32bit'>0x0A0000</content>
 	</BinField>
 	<BinField>
 		<!-- hole 0 size: used for NIST security. -->
 		<name>HOLE0_SIZE</name>          <!-- name of field -->
 		<config>
 			<offset>0x1E4</offset>
 			<size>0x4</size>
 		</config>
 		<content format='32bit'>0xF70000</content>
 	</BinField>

 	<BinField>
 		<!-- hole 1: used for NIST security. -->
 		<name>HOLE1</name>          <!-- name of field -->
 		<config>
 			<offset>0x1E8</offset>
 			<size>0x4</size>
 		</config>
 		<content format='32bit'>0</content>
 	</BinField>
 	<BinField>
 		<!-- hole 1 size: used for NIST security. -->
 		<name>HOLE1_SIZE</name>          <!-- name of field -->
 		<config>
 			<offset>0x1EC</offset>
 			<size>0x4</size>
 		</config>
 		<content format='32bit'>0</content>
 	</BinField>


 	<BinField>
 		<!-- hole 2: used for NIST security. -->
 		<name>HOLE2</name>          <!-- name of field -->
 		<config>
 			<offset>0x1F0</offset>
 			<size>0x4</size>
 		</config>
 		<content format='32bit'>0xFFFFFFFF</content>
 	</BinField>
 	<BinField>
 		<!-- hole 2 size: used for NIST security. -->
 		<name>HOLE2_SIZE</name>          <!-- name of field -->
 		<config>
 			<offset>0x1F4</offset>
 			<size>0x4</size>
 		</config>
 		<content format='32bit'>0</content>
 	</BinField>

 	<BinField>
 		<!-- hole 3: used for NIST security. -->
 		<name>HOLE3</name>          <!-- name of field -->
 		<config>
 			<offset>0x1F8</offset>
 			<size>0x4</size>
 		</config>
 		<content format='32bit'>0</content>
 	</BinField>
 	<BinField>
 		<!-- hole 3 size: used for NIST security. -->
 		<name>HOLE3_SIZE</name>          <!-- name of field -->
 		<config>
 			<offset>0x1FC</offset>
 			<size>0x4</size>
 		</config>
 		<content format='32bit'>0</content>
 	</BinField>

 </Bin_Ecc_Map>
	<!-- SPDX-License-Identifier: GPL-2.0
	#
	# Nuvoton IGPS: Image Generation And Programming Scripts For Poleg BMC
	#
	# Copyright (C) 2018 Nuvoton Technologies, All Rights Reserved
	#--------------------------------------------------------------------------->

	<?xml version="1.0" encoding="UTF-8"?>

	<Bin_Ecc_Map>
	<!-- BMC mandatory fields -->
	<ImageProperties>
	<BinSize>0</BinSize> <!-- If 0 the binary size will be calculated by the tool -->
	<PadValue>0xFF</PadValue> <!-- Byte value to pad the empty areas, default is 0 -->
	</ImageProperties>

	<BinField>
	<!-- BootBlock tag (0x50 0x07 0x55 0xAA 0x54 0x4F 0x4F 0x42) or
	uboot tag (0x55 0x42 0x4F 0x4F 0x54 0x42 0x4C 0x4B) -->
	<name>StartTag</name> <!-- name of field -->
	<config>
	<offset>0</offset>
	<size>0x8</size>
	</config>
	<content format='bytes'>0x50 0x07 0x55 0xAA 0x54 0x4F 0x4F 0x42</content> <!-- content the user should fill -->
	</BinField>

	<BinField>
	<!-- Code destination address, 32-bit aligned: for BootBlock should be 0xFFFD5E00 so code will run in 0xFFFD6000 as linked for -->
	<name>DestAddr</name> <!-- name of field -->
	<config>
	<offset>0x140</offset>
	<size>0x4</size>
	</config>
	<content format='32bit'>0xFFFD5E00</content> <!-- content the user should fill -->
	</BinField>

	<BinField>
	<!-- BootBlock or u-boot Code size -->
	<name>CodeSize</name> <!-- name of field -->
	<config>
	<offset>0x144</offset>
	<size>0x4</size>
	</config>
	<content format='FileSize'>Poleg_bootblock.bin</content> <!-- content the user should fill -->
	</BinField>

	<BinField>
	<!-- The BootBlock or u-boot binary file -->
	<name>Code</name> <!-- name of field -->
	<config>
	<offset>0x200</offset>
	<size format='FileSize'>Poleg_bootblock.bin</size> <!-- size in the header calculated by tool-->
	</config>
	<content format='FileContent'>Poleg_bootblock.bin</content> <!-- content the user should fill -->
	</BinField>

	<!-- BMC optional fields -->
	<BinField>
	<!-- Word contents copied by ROM code to FIU0 FIU_DRD_CFG register -->
	<name>FIU0_DRD_CFG_Set</name> <!-- name of field -->
	<config>
	<offset>0x108</offset>
	<size>0x4</size>
	</config>
	<content format='32bit'>0x0300100B</content> <!-- content the user should fill -->
	</BinField>

	<BinField>
	<!-- Defines the clock divide ratio from AHB to FIU0 clock -->
	<name>FIU_Clk_Divider</name> <!-- name of field -->
	<config>
	<offset>0x10C</offset>
	<size>0x1</size>
	</config>
	<content format='bytes'>0x0A</content> <!-- content the user should fill -->
	</BinField>

	<BinField>
	<!-- Version (Major.Minor) -->
	<name>Version</name> <!-- name of field -->
	<config>
	<offset>0x148</offset>
	<size>0x4</size>
	</config>
	<content format='32bit'>0x0201</content> <!-- content the user should fill -->
	</BinField>

	<BinField>
	<!-- Board manufaturer ( Dell = 0, Nuvoton = 100, Google = 1, MS = 2) -->
	<name>BOARD_VENDOR</name> <!-- name of field -->
	<config>
	<offset>0x14C</offset>
	<size>0x4</size>
	</config>
	<content format='32bit'>100</content> <!--Board_manufacturer: Nuvoton-->
	</BinField>
	<BinField>
	<!-- Board type ( DRB = 0, SVB = 1, EB = 2,HORIZON = 3, SANDSTORM = 4, ROCKAWAY = 100 RunBMC = 10) -->
	<!-- WARNING: Currently this value is only printed to serial. Set BOARD_VENDOR to 1 get Dell specific customization. -->
	<name>BOARD_TYPE</name> <!-- name of field -->
	<config>
	<offset>0x150</offset>
	<size>0x4</size>
	</config>
	<content format='32bit'>0x64</content> <!--Board_type: EB-->
	</BinField>

	<!-- the next two fields are available since version 10.7.0 -->
	<BinField>
	<!-- supported values: 333,444,500,600,666,700,720,750,775,787,800,825,850,900,950,1000,1060 -->
	<name>MC_FREQ_IN_MHZ</name> <!-- name of field -->
	<config>
	<offset>0x11C</offset>
	<size>0x2</size>
	</config>
	<content format='32bit'>800</content>
	</BinField>
	<BinField>
	<!-- supporeted values: 333,500,600,666,700,720,750,800,825,850,900,950,1000,1060 -->
	<name>CPU_FREQ_IN_MHZ</name> <!-- name of field -->
	<config>
	<offset>0x154</offset>
	<size>0x2</size>
	</config>
	<content format='32bit'>800</content>
	</BinField>

	<BinField>
	<!-- MC_CONFIG.
	Bit 0: MC_DISABLE_CAPABILITY_INPUT_DQS_ENHANCE_TRAINING (0x01)
	Bit 1: MC_CAPABILITY_IGNORE_ECC_DEVICE (0x02) -->
	<name>MC_CONFIG</name> <!-- name of field -->
	<config>
	<offset>0x156</offset>
	<size>0x1</size>
	</config>
	<content format='32bit'>0x01</content>
	</BinField>

	<BinField>
	<!-- HOST_IF.
	0xFF: LPC backward compatible
	0x00: LPC.
	0x01: eSPI
	0x02: GPIOs TRIS. -->
	<name>HOST_IF</name> <!-- name of field -->
	<config>
	<offset>0x157</offset>
	<size>0x1</size>
	</config>
	<content format='32bit'>0x00</content>
	</BinField>

	<BinField>
	<!-- SECURITY_LEVEL_T.
	0xFF: SECURITY_LEVEL_UNKNOWN: backward compatible
	0x00: SECURITY_LEVEL_NONE.
	0x01: SECURITY_LEVEL_STANDARD
	0x02: SECURITY_LEVEL_NIST. (require BootBlock with NIST support) -->
	<name>SECURITY_LEVEL_T</name> <!-- name of field -->
	<config>
	<offset>0x15C</offset>
	<size>0x1</size>
	</config>
	<content format='32bit'>0xFF</content>
	</BinField>

	<BinField>
	<!-- Key revoke (bitwise). Set bit 0 to revoke key 0 etc. -->
	<name>SECURITY_REVOKE_KEYS</name> <!-- name of field -->
	<config>
	<offset>0x1D7</offset>
	<size>0x1</size>
	</config>
	<content format='bytes'>0x00</content>
	</BinField>

	<BinField>
	<!-- security log offset -->
	<name>SECURITY_LOG</name> <!-- name of field -->
	<config>
	<offset>0x1D8</offset>
	<size>0x4</size>
	</config>
	<content format='32bit'>0x090000</content>
	</BinField>
	<BinField>
	<!-- hole 0 size: used for NIST security. -->
	<name>SECURITY_LOG_SIZE</name> <!-- name of field -->
	<config>
	<offset>0x1DC</offset>
	<size>0x4</size>
	</config>
	<content format='32bit'>0x3000</content>
	</BinField>


	<BinField>
	<!-- hole 0: used for NIST security. -->
	<name>HOLE0</name> <!-- name of field -->
	<config>
	<offset>0x1E0</offset>
	<size>0x4</size>
	</config>
	<content format='32bit'>0x0A0000</content>
	</BinField>
	<BinField>
	<!-- hole 0 size: used for NIST security. -->
	<name>HOLE0_SIZE</name> <!-- name of field -->
	<config>
	<offset>0x1E4</offset>
	<size>0x4</size>
	</config>
	<content format='32bit'>0xF70000</content>
	</BinField>

	<BinField>
	<!-- hole 1: used for NIST security. -->
	<name>HOLE1</name> <!-- name of field -->
	<config>
	<offset>0x1E8</offset>
	<size>0x4</size>
	</config>
	<content format='32bit'>0</content>
	</BinField>
	<BinField>
	<!-- hole 1 size: used for NIST security. -->
	<name>HOLE1_SIZE</name> <!-- name of field -->
	<config>
	<offset>0x1EC</offset>
	<size>0x4</size>
	</config>
	<content format='32bit'>0</content>
	</BinField>


	<BinField>
	<!-- hole 2: used for NIST security. -->
	<name>HOLE2</name> <!-- name of field -->
	<config>
	<offset>0x1F0</offset>
	<size>0x4</size>
	</config>
	<content format='32bit'>0xFFFFFFFF</content>
	</BinField>
	<BinField>
	<!-- hole 2 size: used for NIST security. -->
	<name>HOLE2_SIZE</name> <!-- name of field -->
	<config>
	<offset>0x1F4</offset>
	<size>0x4</size>
	</config>
	<content format='32bit'>0</content>
	</BinField>

	<BinField>
	<!-- hole 3: used for NIST security. -->
	<name>HOLE3</name> <!-- name of field -->
	<config>
	<offset>0x1F8</offset>
	<size>0x4</size>
	</config>
	<content format='32bit'>0</content>
	</BinField>
	<BinField>
	<!-- hole 3 size: used for NIST security. -->
	<name>HOLE3_SIZE</name> <!-- name of field -->
	<config>
	<offset>0x1FC</offset>
	<size>0x4</size>
	</config>
	<content format='32bit'>0</content>
	</BinField>

	</Bin_Ecc_Map>