blob: 62415a43edfe2e3a8fb1634e5de3f9e7a111e2fd [file] [log] [blame]
Patrick Williamsd8c66bc2016-06-20 12:57:21 -05001# BBMASK contains regular expressions that can be used to tell BitBake to ignore
2# certain recipes.
3#BBMASK = ""
4
5#
6# Parallelism Options
7#
8# These two options control how much parallelism BitBake should use. The first
9# option determines how many tasks bitbake should run in parallel:
10#
11#BB_NUMBER_THREADS ?= "4"
12#
13# Default to setting automatically based on cpu count
14#BB_NUMBER_THREADS ?= "${@oe.utils.cpu_count()}"
15#
16# The second option controls how many processes make should run in parallel when
17# running compile tasks:
18#
19#PARALLEL_MAKE ?= "-j 4"
20#
21# Default to setting automatically based on cpu count
22#PARALLEL_MAKE ?= "-j ${@oe.utils.cpu_count()}"
23#
24# For a quad-core machine, BB_NUMBER_THREADS = "4", PARALLEL_MAKE = "-j 4" would
25# be appropriate for example.
26
Brad Bishopc342db32019-05-15 21:57:59 -040027# If you want to get an image based on directfb without x11 alter
28# DISTRO_FEATURES:
29DISTRO_FEATURES_append = " directfb"
30DISTRO_FEATURES_remove = "x11"
Patrick Williamsd8c66bc2016-06-20 12:57:21 -050031
32# ENABLE_BINARY_LOCALE_GENERATION controls the generation of binary locale
33# packages at build time using qemu-native. Disabling it (by setting it to 0)
34# will save some build time at the expense of breaking i18n on devices with
35# less than 128MB RAM.
36#ENABLE_BINARY_LOCALE_GENERATION = "1"
37
Brad Bishop6e60e8b2018-02-01 10:27:11 -050038# If GLIBC_SPLIT_LC_PACKAGES is set to a non-zero value, convert
39# glibc-binary-localedata-XX-YY to be a meta package depending on
40# glibc-binary-localedata-XX-YY-lc-address and so on. This enables
41# saving quite some space if someone doesn't need LC_COLLATE for
42# example.
43#GLIBC_SPLIT_LC_PACKAGES = "1"
44
Patrick Williamsd8c66bc2016-06-20 12:57:21 -050045# Set GLIBC_GENERATE_LOCALES to the locales you wish to generate should you not
46# wish to perform the time-consuming step of generating all LIBC locales.
47# NOTE: If removing en_US.UTF-8 you will also need to uncomment, and set
48# appropriate value for IMAGE_LINGUAS.
49# WARNING: this may break localisation!
Brad Bishop1a4b7ee2018-12-16 17:11:34 -080050# WARNING: some recipes expect certain localizations to be enabled, e.g.
51# bash-ptest: fr-fr, de-de
52# glib-2.0-ptest: tr-tr, lt-lt, ja-jp.euc-jp, fa-ir, ru-ru, de-de, hr-hr, el-gr, fr-fr, es-es, en-gb
53# if you remove some of these and enable ptest, you'll get QA warning like:
54# ERROR: glib-2.0-1_2.58.0-r0 do_package_qa: QA Issue: glib-2.0-ptest rdepends on locale-base-de-de, but it isn't a build dependency? [build-deps]
Patrick Williamsd8c66bc2016-06-20 12:57:21 -050055#GLIBC_GENERATE_LOCALES = "en_GB.UTF-8 en_US.UTF-8"
56#IMAGE_LINGUAS ?= "en-gb"
57
58# The following are used to control options related to debugging.
59#
60# Uncomment this to change the optimization to make debugging easer, at the
61# possible cost of performance.
62# DEBUG_BUILD = "1"
63#
64# Uncomment this to disable the stripping of the installed binaries
65# INHIBIT_PACKAGE_STRIP = "1"
66#
67# Uncomment this to disable the split of the debug information into -dbg files
68# INHIBIT_PACKAGE_DEBUG_SPLIT = "1"
69#
70# When splitting debug information, the following controls the results of the
71# file splitting.
72#
73# .debug (default):
74# When splitting the debug information will be placed into
75# a .debug directory in the same dirname of the binary produced:
76# /bin/foo -> /bin/.debug/foo
77#
78# debug-file-directory:
79# When splitting the debug information will be placed into
80# a central debug-file-directory, /usr/lib/debug:
81# /bin/foo -> /usr/lib/debug/bin/foo.debug
82#
83# Any source code referenced in the debug symbols will be copied
84# and made available within the /usr/src/debug directory
85#
86#PACKAGE_DEBUG_SPLIT_STYLE = '.debug'
87# PACKAGE_DEBUG_SPLIT_STYLE = 'debug-file-directory'
88
89# Uncomment these to build a package such that you can use gprof to profile it.
90# NOTE: This will only work with 'linux' targets, not
91# 'linux-uclibc', as uClibc doesn't provide the necessary
92# object files. Also, don't build glibc itself with these
93# flags, or it'll fail to build.
94#
95# PROFILE_OPTIMIZATION = "-pg"
96# SELECTED_OPTIMIZATION = "${PROFILE_OPTIMIZATION}"
97# LDFLAGS =+ "-pg"
98
99# TCMODE controls the characteristics of the generated packages/images by
100# telling poky which toolchain 'profile' to use.
101#
102# The default is "default" which uses the internal toolchain. With
103# additional layers, it is possible to set this to use a precompiled
104# external toolchain. One example is the Sourcery G++ Toolchain, support
105# for which is now in the separate meta-sourcery layer:
106#
107# http://github.com/MentorEmbedded/meta-sourcery/
108#
109# meta-sourcery can be used as a template for adding support for other
110# external toolchains. See the link above for further details.
111#
112# TCMODE points the system to a file in conf/distro/include/tcmode-${TCMODE}.inc,
113# so for meta-sourcery which has conf/distro/include/tcmode-external-sourcery.inc
114# you would set it as follows:
115#
116# TCMODE ?= "external-sourcery"
117
118# mklibs library size optimization is more useful to smaller images,
119# and less useful for bigger images. Also mklibs library optimization
120# can break the ABI compatibility, so should not be applied to the
121# images which are to be extended or upgraded later.
122#This enabled mklibs library size optimization just for the specified image.
123#MKLIBS_OPTIMIZED_IMAGES ?= "core-image-minimal"
124#This enable mklibs library size optimization will be for all the images.
125#MKLIBS_OPTIMIZED_IMAGES ?= "all"
126
Patrick Williamsd8c66bc2016-06-20 12:57:21 -0500127# This value is currently used by pseudo to determine if the recipe should
128# build both the 32-bit and 64-bit wrapper libraries on a 64-bit build system.
129#
130# Pseudo will attempt to determine if a 32-bit wrapper is necessary, but
131# it doesn't always guess properly. If you have 32-bit executables on
132# your 64-bit build system, you likely want to set this to "0",
133# otherwise you could end up with incorrect file attributes on the
134# target filesystem.
135#
136# Default is to not build 32 bit libs on 64 bit systems, uncomment this
137# if you need the 32 bits libs
138#NO32LIBS = "0"
139
140# Uncomment the following lines to enable multilib builds
141#require conf/multilib.conf
142#MULTILIBS = "multilib:lib32"
143#DEFAULTTUNE_virtclass-multilib-lib32 = "x86"
144
145# Set RPM_PREFER_ELF_ARCH to configure preferred ABI when using rpm packaging
146# backend to generate a rootfs, choices are:
147# 1: ELF32 wins
148# 2: ELF64 wins
149# 4: ELF64 N32 wins (for mips64 or mips64el only)
150#RPM_PREFER_ELF_ARCH ?= "2"
151
152# The network based PR service host and port
153# Uncomment the following lines to enable PRservice.
154# Set PRSERV_HOST to 'localhost:0' to automatically
155# start local PRService.
156# Set to other values to use remote PRService.
157#PRSERV_HOST = "localhost:0"
158
159# Additional image generation features
160#
161# The following is a list of classes to import to use in the generation of images
162# currently an example class is image_types_uboot
163# IMAGE_CLASSES = " image_types_uboot"
164
165# The following options will build a companion 'debug filesystem' in addition
166# to the normal deployable filesystem. This companion system allows a
167# debugger to know the symbols and related sources. It can be used to
168# debug a remote 'production' system without having to add the debug symbols
169# and sources to remote system. If IMAGE_FSTYPES_DEBUGFS is not defined, it
170# defaults to IMAGE_FSTYPES.
171#IMAGE_GEN_DEBUGFS = "1"
172#IMAGE_FSTYPES_DEBUGFS = "tar.gz"
173
174# Incremental rpm image generation, the rootfs would be totally removed
175# and re-created in the second generation by default, but with
176# INC_RPM_IMAGE_GEN = "1", the rpm based rootfs would be kept, and will
177# do update(remove/add some pkgs) on it. NOTE: This is not suggested
178# when you want to create a productive rootfs
179#INC_RPM_IMAGE_GEN = "1"
180
181# This is a list of packages that require a commercial license to ship
182# product. If shipped as part of an image these packages may have
183# implications so they are disabled by default. To enable them,
184# un-comment the below as appropriate.
185#LICENSE_FLAGS_WHITELIST = "commercial_gst-fluendo-mp3 \
186# commercial_gst-openmax \
187# commercial_gst-plugins-ugly \
188# commercial_lame \
189# commercial_libmad \
190# commercial_libomxil \
191# commercial_mpeg2dec"
192
193
194#
195# Disk space monitor, take action when the disk space or the amount of
196# inode is running low, it is enabled when BB_DISKMON_DIRS is set.
197#
198# Set the directory for the monitor, the format is:
199# "action,directory,minimum_space,minimum_free_inode"
200#
201# The "action" must be set and should be one of:
202# ABORT: Immediately abort
203# STOPTASKS: The new tasks can't be executed any more, will stop the build
204# when the running tasks have been done.
205# WARN: show warnings (see BB_DISKMON_WARNINTERVAL for more information)
206#
207# The "directory" must be set, any directory is OK.
208#
209# Either "minimum_space" or "minimum_free_inode" (or both of them)
210# should be set, otherwise the monitor would not be enabled,
211# the unit can be G, M, K or none, but do NOT use GB, MB or KB
212# (B is not needed).
213#BB_DISKMON_DIRS = "STOPTASKS,${TMPDIR},1G,100K WARN,${SSTATE_DIR},1G,100K"
214#
215# Set disk space and inode interval (only works when the action is "WARN",
216# the unit can be G, M, or K, but do NOT use the GB, MB or KB
217# (B is not needed), the format is:
218# "disk_space_interval,disk_inode_interval", the default value is
219# "50M,5K" which means that it would warn when the free space is
220# lower than the minimum space(or inode), and would repeat the warning
221# when the disk space reduces 50M (or the amount of inode reduces 5k).
222#BB_DISKMON_WARNINTERVAL = "50M,5K"
223
224# Archive the source and put them to ${DEPLOY_DIR}/sources/.
225#
226#INHERIT += "archiver"
227#
228# The tarball for the patched source will be created by default, and you
229# can configure the archiver as follow:
230#
231# Create archive for:
232# 1) original (or unpacked) source:
233#ARCHIVER_MODE[src] = "original"
234# 2) patched source: (default)
235#ARCHIVER_MODE[src] = "patched"
236# 3) configured source:
237#ARCHIVER_MODE[src] = "configured"
238#
239# 4) the patches between do_unpack and do_patch:
240#ARCHIVER_MODE[diff] = "1"
241# set the files that you'd like to exclude from the diff:
242#ARCHIVER_MODE[diff-exclude] ?= ".pc autom4te.cache patches"
243#
244# 5) the environment data, similar to 'bitbake -e recipe':
245#ARCHIVER_MODE[dumpdata] = "1"
246#
247# 6) the recipe (.bb and .inc):
248#ARCHIVER_MODE[recipe] = "1"
249#
250# 7) Whether output the .src.rpm package:
251#ARCHIVER_MODE[srpm] = "1"
252#
253# 8) Filter the license, the recipe whose license in
254# COPYLEFT_LICENSE_INCLUDE will be included, and in
255# COPYLEFT_LICENSE_EXCLUDE will be excluded.
256#COPYLEFT_LICENSE_INCLUDE = 'GPL* LGPL*'
257#COPYLEFT_LICENSE_EXCLUDE = 'CLOSED Proprietary'
258#
259# 9) Config the recipe type that will be archived, the type can be
260# target, native, nativesdk, cross, crosssdk and cross-canadian,
261# you can set one or more types. Archive all types by default.
262#COPYLEFT_RECIPE_TYPES = 'target'
263#
264
Patrick Williamsd8c66bc2016-06-20 12:57:21 -0500265#
266# GCC/LD FLAGS to enable more secure code generation
267#
268# By including the security_flags include file you enable flags
269# to the compiler and linker that cause them to generate more secure
Brad Bishop79641f22019-09-10 07:20:22 -0400270# code.
Patrick Williamsd8c66bc2016-06-20 12:57:21 -0500271# This does affect compile speed slightly.
272#
273# Use the following line to enable the security compiler and linker flags to your build
274#require conf/distro/include/security_flags.inc
275
276# Image level user/group configuration.
277# Inherit extrausers to make the setting of EXTRA_USERS_PARAMS effective.
Brad Bishop19323692019-04-05 15:28:33 -0400278#IMAGE_CLASSES += "extrausers"
Patrick Williamsd8c66bc2016-06-20 12:57:21 -0500279# User / group settings
Brad Bishop19323692019-04-05 15:28:33 -0400280# The settings are separated by the ; character.
Patrick Williamsd8c66bc2016-06-20 12:57:21 -0500281# Each setting is actually a command. The supported commands are useradd,
282# groupadd, userdel, groupdel, usermod and groupmod.
283#EXTRA_USERS_PARAMS = "\
Brad Bishop19323692019-04-05 15:28:33 -0400284# useradd -p '' tester; \
285# groupadd developers; \
286# userdel nobody; \
287# groupdel video; \
288# groupmod -g 1020 developers; \
289# usermod -s /bin/sh tester; \
Patrick Williamsd8c66bc2016-06-20 12:57:21 -0500290#"
291
292# Various packages dynamically add users and groups to the system at package
293# install time. For programs that do not care what the uid/gid is of the
294# resulting users/groups, the order of the install will determine the final
295# uid/gid. This can lead to non-deterministic uid/gid values from one build
296# to another. Use the following settings to specify that all user/group adds
297# should be created based on a static passwd/group file.
298#
299# Note, if you enable or disable the useradd-staticids in a configured system,
300# the TMPDIR may contain incorrect uid/gid values. Clearing the TMPDIR
301# will correct this condition.
302#
303# By default the system looks in the BBPATH for files/passwd and files/group
Andrew Geisslerf0343792020-11-18 10:42:21 -0600304# the default can be overridden by specifying USERADD_UID/GID_TABLES.
Patrick Williamsd8c66bc2016-06-20 12:57:21 -0500305#
306#USERADDEXTENSION = "useradd-staticids"
307#USERADD_UID_TABLES = "files/passwd"
308#USERADD_GID_TABLES = "files/group"
309#
310# In order to prevent generating a system where a dynamicly assigned uid/gid
311# can exist, you should enable the following setting. This will force the
312# system to error out if the user/group name is not defined in the
313# files/passwd or files/group (or specified replacements.)
314#USERADD_ERROR_DYNAMIC = "1"
315
316# Enabling FORTRAN
317# Note this is not officially supported and is just illustrated here to
318# show an example of how it can be done
319# You'll also need your fortran recipe to depend on libgfortran
320#FORTRAN_forcevariable = ",fortran"
Patrick Williamsd8c66bc2016-06-20 12:57:21 -0500321
322#
323# Kernel image features
324#
325# The INITRAMFS_IMAGE image variable will cause an additional recipe to
326# be built as a dependency to the what ever rootfs recipe you might be
327# using such as core-image-sato. The initramfs might be needed for
328# the initial boot of of the target system such as to load kernel
329# modules prior to mounting the root file system.
330#
331# INITRAMFS_IMAGE_BUNDLE variable controls if the image recipe
332# specified by the INITRAMFS_IMAGE will be run through an extra pass
333# through the kernel compilation in order to build a single binary
334# which contains both the kernel image and the initramfs. The
335# combined binary will be deposited into the tmp/deploy directory.
336# NOTE: You can set INITRAMFS_IMAGE in an image recipe, but
337# INITRAMFS_IMAGE_BUNDLE can only be set in a conf file.
338#
339#INITRAMFS_IMAGE = "core-image-minimal-initramfs"
340#INITRAMFS_IMAGE_BUNDLE = "1"
341
342#
343# IPK Hierarchical feed
344#
345# In some cases it may be desirable not to have all package files in the same
346# directory. An example would be when package feeds are to be uploaded to a
347# shared webhosting service or transferred to a Windows machine which may have
348# problems with directories containing multiple thousands of files.
349#
350# If the IPK_HIERARCHICAL_FEED variable is set to "1", packages will be split
351# between subdirectories in a similar way to how Debian package feeds are
352# organised. In the hierarchical feed, package files are written to
353# <outdir>/<arch>/<pkg_prefix>/<pkg_subdir>, where pkg_prefix is the first
354# letter of the package file name for non-lib packages or "lib" plus the 4th
355# letter of the package file name for lib packages (eg, 'l' for less, 'libc' for
356# libc6). pkg_subdir is the root of the package file name, discarding the
357# version and architecture parts and the common suffixes '-dbg', '-dev', '-doc',
358# '-staticdev', '-locale' and '-locale-*' which are listed in
359# meta/conf/bitbake.conf.
360#
361# If IPK_HIERARCHICAL_FEED is unset or set to any other value, the traditional
362# feed layout is used where package files are placed in <outdir>/<arch>/.
363#
364#IPK_HIERARCHICAL_FEED = "1"
365#
366
Patrick Williamsd8c66bc2016-06-20 12:57:21 -0500367#
368# Use busybox/mdev for system initialization
369#
370#VIRTUAL-RUNTIME_dev_manager = "busybox-mdev"
371#VIRTUAL-RUNTIME_login_manager = "busybox"
372#VIRTUAL-RUNTIME_init_manager = "busybox"
373#VIRTUAL-RUNTIME_initscripts = "initscripts"
374#VIRTUAL-RUNTIME_keymaps = "keymaps"
375#DISTRO_FEATURES_BACKFILL_CONSIDERED += "sysvinit"
376
377#
378# Use systemd for system initialization
379#
380#DISTRO_FEATURES_append = " systemd"
381#DISTRO_FEATURES_BACKFILL_CONSIDERED += "sysvinit"
Brad Bishop19323692019-04-05 15:28:33 -0400382#VIRTUAL-RUNTIME_login_manager = "shadow-base"
Patrick Williamsd8c66bc2016-06-20 12:57:21 -0500383#VIRTUAL-RUNTIME_init_manager = "systemd"
384#VIRTUAL-RUNTIME_initscripts = "systemd-compat-units"