service/src/mainapp.cpp

/*
// Copyright (c) 2019 Intel Corporation
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
//
//      http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.
*/

#include "pfr.hpp"
#include "pfr_mgr.hpp"

#include <systemd/sd-journal.h>

#include <boost/asio.hpp>

// Caches the last Recovery/Panic Count to
// identify any new Recovery/panic actions.
/* TODO: When BMC Reset's, these values will be lost
 * Persist this info using settingsd */
static uint8_t lastRecoveryCount = 0;
static uint8_t lastPanicCount = 0;
static uint8_t lastMajorErr = 0;
static uint8_t lastMinorErr = 0;

static bool stateTimerRunning = false;
bool finishedSettingChkPoint = false;
static constexpr uint8_t bmcBootFinishedChkPoint = 0x09;

std::unique_ptr<boost::asio::steady_timer> stateTimer = nullptr;
std::unique_ptr<boost::asio::steady_timer> initTimer = nullptr;

std::vector<std::unique_ptr<intel::pfr::PfrVersion>> pfrVersionObjects;
std::unique_ptr<intel::pfr::PfrConfig> pfrConfigObject;

using namespace intel::pfr;
// List holds <ObjPath> <ImageType> <VersionPurpose>
static std::vector<std::tuple<std::string, ImageType, std::string>>
    verComponentList = {
        std::make_tuple("bmc_active", ImageType::bmcActive, versionPurposeBMC),
        std::make_tuple("bmc_recovery", ImageType::bmcRecovery,
                        versionPurposeBMC),
        std::make_tuple("bios_active", ImageType::biosActive,
                        versionPurposeHost),
        std::make_tuple("bios_recovery", ImageType::biosRecovery,
                        versionPurposeHost),
        std::make_tuple("cpld_active", ImageType::cpldActive,
                        versionPurposeOther),
        std::make_tuple("cpld_recovery", ImageType::cpldRecovery,
                        versionPurposeOther),
};

// Recovery reason map.
// {<CPLD association>,{<Redfish MessageID>, <Recovery Reason>}}
static const boost::container::flat_map<uint8_t,
                                        std::pair<std::string, std::string>>
    recoveryReasonMap = {
        {0x01,
         {"BIOSFirmwareRecoveryReason",
          "BIOS active image authentication failure"}},
        {0x02,
         {"BIOSFirmwareRecoveryReason",
          "BIOS recovery image authentication failure"}},
        {0x03, {"MEFirmwareRecoveryReason", "ME launch failure"}},
        {0x04, {"BIOSFirmwareRecoveryReason", "ACM launch failure"}},
        {0x05, {"BIOSFirmwareRecoveryReason", "IBB launch failure"}},
        {0x06, {"BIOSFirmwareRecoveryReason", "OBB launch failure"}},
        {0x07,
         {"BMCFirmwareRecoveryReason",
          "BMC active image authentication failure"}},
        {0x08,
         {"BMCFirmwareRecoveryReason",
          "BMC recovery image authentication failure"}},
        {0x09, {"BMCFirmwareRecoveryReason", "BMC launch failure"}},
        {0x0A, {"CPLDFirmwareRecoveryReason", "CPLD watchdog expired"}}};

// Panic Reason map.
// {<CPLD association>, {<Redfish MessageID>, <Panic reason> })
static const boost::container::flat_map<uint8_t,
                                        std::pair<std::string, std::string>>
    panicReasonMap = {
        {0x01, {"BIOSFirmwarePanicReason", "BIOS update intent"}},
        {0x02, {"BMCFirmwarePanicReason", "BMC update intent"}},
        {0x03, {"BMCFirmwarePanicReason", "BMC reset detected"}},
        {0x04, {"BMCFirmwarePanicReason", "BMC watchdog expired"}},
        {0x05, {"MEFirmwarePanicReason", "ME watchdog expired"}},
        {0x06, {"BIOSFirmwarePanicReason", "ACM watchdog expired"}},
        {0x07, {"BIOSFirmwarePanicReason", "IBB watchdog expired"}},
        {0x08, {"BIOSFirmwarePanicReason", "OBB watchdog expired"}},
        {0x09,
         {"BIOSFirmwarePanicReason",
          "ACM or IBB or OBB authentication failure"}}};

// Firmware resiliency major map.
// {<CPLD association>, {<Redfish MessageID>, <Error reason> })
static const boost::container::flat_map<uint8_t,
                                        std::pair<std::string, std::string>>
    majorErrorCodeMap = {
        {0x01,
         {"BMCFirmwareResiliencyError", "BMC image authentication failed"}},
        {0x02,
         {"BIOSFirmwareResiliencyError", "BIOS image authentication failed"}},
        {0x03, {"BIOSFirmwareResiliencyError", "Update from BIOS failed"}},
        {0x04, {"BMCFirmwareResiliencyError", "Update from BMC failed"}}};

static void updateDbusPropertiesCache()
{
    for (const auto& pfrVerObj : pfrVersionObjects)
    {
        pfrVerObj->updateVersion();
    }

    // Update provisoningStatus properties
    pfrConfigObject->updateProvisioningStatus();

    phosphor::logging::log<phosphor::logging::level::INFO>(
        "PFR Manager service cache data updated.");
}

static void logLastRecoveryEvent()
{
    uint8_t reason = 0;
    if (0 !=
        intel::pfr::readCpldReg(intel::pfr::ActionType::recoveryReason, reason))
    {
        return;
    }

    auto it = recoveryReasonMap.find(reason);
    if (it == recoveryReasonMap.end())
    {
        // No matching found. So just return without logging event.
        return;
    }
    std::string msgId = "OpenBMC.0.1." + it->second.first;
    sd_journal_send("MESSAGE=%s", "Platform firmware recovery occurred.",
                    "PRIORITY=%i", LOG_WARNING, "REDFISH_MESSAGE_ID=%s",
                    msgId.c_str(), "REDFISH_MESSAGE_ARGS=%s",
                    it->second.second.c_str(), NULL);
}

static void logLastPanicEvent()
{
    uint8_t reason = 0;
    if (0 !=
        intel::pfr::readCpldReg(intel::pfr::ActionType::panicReason, reason))
    {
        return;
    }

    auto it = panicReasonMap.find(reason);
    if (it == panicReasonMap.end())
    {
        // No matching found. So just return without logging event.
        return;
    }

    std::string msgId = "OpenBMC.0.1." + it->second.first;
    sd_journal_send("MESSAGE=%s", "Platform firmware panic occurred.",
                    "PRIORITY=%i", LOG_WARNING, "REDFISH_MESSAGE_ID=%s",
                    msgId.c_str(), "REDFISH_MESSAGE_ARGS=%s",
                    it->second.second.c_str(), NULL);
}

static void logResiliencyErrorEvent(const uint8_t majorErrorCode,
                                    const uint8_t minorErrorCode)
{
    auto it = majorErrorCodeMap.find(majorErrorCode);
    if (it == majorErrorCodeMap.end())
    {
        // No matching found. So just return without logging event.
        return;
    }

    std::string errorStr =
        it->second.second + "(MinorCode:0x" + toHexString(minorErrorCode) + ")";
    std::string msgId = "OpenBMC.0.1." + it->second.first;
    sd_journal_send(
        "MESSAGE=%s", "Platform firmware resiliency error occurred.",
        "PRIORITY=%i", LOG_ERR, "REDFISH_MESSAGE_ID=%s", msgId.c_str(),
        "REDFISH_MESSAGE_ARGS=%s", errorStr.c_str(), NULL);
}

static void checkAndLogEvents()
{
    uint8_t currPanicCount = 0;
    if (0 == intel::pfr::readCpldReg(intel::pfr::ActionType::panicCount,
                                     currPanicCount))
    {
        if (lastPanicCount != currPanicCount)
        {
            // Update cached data and log redfish event by reading reason.
            lastPanicCount = currPanicCount;
            logLastPanicEvent();
        }
    }

    uint8_t currRecoveryCount = 0;
    if (0 == intel::pfr::readCpldReg(intel::pfr::ActionType::recoveryCount,
                                     currRecoveryCount))
    {
        if (lastRecoveryCount != currRecoveryCount)
        {
            // Update cached data and log redfish event by reading reason.
            lastRecoveryCount = currRecoveryCount;
            logLastRecoveryEvent();
        }
    }

    uint8_t majorErr = 0;
    uint8_t minorErr = 0;
    if ((0 == intel::pfr::readCpldReg(intel::pfr::ActionType::majorError,
                                      majorErr)) &&
        (0 ==
         intel::pfr::readCpldReg(intel::pfr::ActionType::minorError, minorErr)))
    {
        if ((lastMajorErr != majorErr) || (lastMinorErr != minorErr))
        {
            lastMajorErr = majorErr;
            lastMinorErr = minorErr;

            logResiliencyErrorEvent(majorErr, minorErr);
        }
    }
}

static void monitorPlatformStateChange(
    sdbusplus::asio::object_server& server,
    std::shared_ptr<sdbusplus::asio::connection>& conn)
{
    constexpr size_t pollTimeout = 10; // seconds
    stateTimer->expires_after(std::chrono::seconds(pollTimeout));
    stateTimer->async_wait(
        [&server, &conn](const boost::system::error_code& ec) {
            if (ec == boost::asio::error::operation_aborted)
            {
                // Timer reset.
                return;
            }
            if (ec)
            {
                // Platform State Monitor - Timer cancelled.
                return;
            }
            checkAndLogEvents();
            monitorPlatformStateChange(server, conn);
        });
}

void checkAndSetCheckpoint(sdbusplus::asio::object_server& server,
                           std::shared_ptr<sdbusplus::asio::connection>& conn)
{
    // Check whether systemd completed all the loading.
    conn->async_method_call(
        [&server, &conn](boost::system::error_code ec,
                         const std::variant<uint64_t>& value) {
            if (!ec)
            {
                if (std::get<uint64_t>(value))
                {
                    phosphor::logging::log<phosphor::logging::level::INFO>(
                        "PFR: BMC boot completed. Setting checkpoint 9.");
                    if (!finishedSettingChkPoint)
                    {
                        finishedSettingChkPoint = true;
                        intel::pfr::setBMCBootCheckpoint(
                            bmcBootFinishedChkPoint);
                    }
                    return;
                }
            }
            else
            {
                // Failed to get data from systemd. System might not
                // be ready yet. Attempt again for data.
                phosphor::logging::log<phosphor::logging::level::ERR>(
                    "PFR: aync call failed to get FinishTimestamp.",
                    phosphor::logging::entry("MSG=%s", ec.message().c_str()));
            }
            // FIX-ME: Latest up-stream sync caused issue in receiving
            // StartupFinished signal. Unable to get StartupFinished signal
            // from systemd1 hence using poll method too, to trigger it
            // properly.
            constexpr size_t pollTimeout = 10; // seconds
            initTimer->expires_after(std::chrono::seconds(pollTimeout));
            initTimer->async_wait([&server,
                                   &conn](const boost::system::error_code& ec) {
                if (ec == boost::asio::error::operation_aborted)
                {
                    // Timer reset.
                    phosphor::logging::log<phosphor::logging::level::INFO>(
                        "PFR: Set boot Checkpoint - Timer aborted or stopped.");
                    return;
                }
                if (ec)
                {
                    phosphor::logging::log<phosphor::logging::level::ERR>(
                        "PFR: Set boot Checkpoint - async wait error.");
                    return;
                }
                checkAndSetCheckpoint(server, conn);
            });
        },
        "org.freedesktop.systemd1", "/org/freedesktop/systemd1",
        "org.freedesktop.DBus.Properties", "Get",
        "org.freedesktop.systemd1.Manager", "FinishTimestamp");
}

void monitorSignals(sdbusplus::asio::object_server& server,
                    std::shared_ptr<sdbusplus::asio::connection>& conn)
{
    // Monitor Boot finished signal and set the checkpoint 9 to
    // notify CPLD about BMC boot finish.
    auto bootFinishedSignal = std::make_unique<sdbusplus::bus::match::match>(
        static_cast<sdbusplus::bus::bus&>(*conn),
        "type='signal',"
        "member='StartupFinished',path='/org/freedesktop/systemd1',"
        "interface='org.freedesktop.systemd1.Manager'",
        [&server, &conn](sdbusplus::message::message& msg) {
            if (!finishedSettingChkPoint)
            {
                phosphor::logging::log<phosphor::logging::level::INFO>(
                    "PFR: BMC boot completed(StartupFinished). Setting "
                    "checkpoint 9.");
                finishedSettingChkPoint = true;
                intel::pfr::setBMCBootCheckpoint(bmcBootFinishedChkPoint);
            }
        });
    checkAndSetCheckpoint(server, conn);

    // Capture the Chassis state and Start the monitor timer
    // if state changed to 'On'. Run timer until  OS boot.
    // Stop timer if state changed to 'Off'.
    static auto matchChassisState = sdbusplus::bus::match::match(
        static_cast<sdbusplus::bus::bus&>(*conn),
        "type='signal',member='PropertiesChanged', "
        "interface='org.freedesktop.DBus.Properties', "
        "sender='xyz.openbmc_project.State.Chassis', "
        "arg0namespace='xyz.openbmc_project.State.Chassis'",
        [&server, &conn](sdbusplus::message::message& message) {
            std::string intfName;
            std::map<std::string, std::variant<std::string>> properties;
            message.read(intfName, properties);

            const auto it = properties.find("CurrentPowerState");
            if (it != properties.end())
            {
                const std::string* state =
                    std::get_if<std::string>(&it->second);
                if (state != nullptr)
                {
                    if ((*state ==
                         "xyz.openbmc_project.State.Chassis.PowerState.On") &&
                        (!stateTimerRunning))
                    {
                        stateTimerRunning = true;
                        monitorPlatformStateChange(server, conn);
                    }
                    else if ((*state == "xyz.openbmc_project.State.Chassis."
                                        "PowerState.Off") &&
                             (stateTimerRunning))
                    {
                        stateTimer->cancel();
                        checkAndLogEvents();
                        stateTimerRunning = false;
                    }
                }

                // Update the D-Bus properties when chassis state changes.
                updateDbusPropertiesCache();
            }
        });

    // Capture the Host state and Start the monitor timer
    // if state changed to 'Running'. Run timer until OS boot.
    // Stop timer if state changed to 'Off'.
    static auto matchHostState = sdbusplus::bus::match::match(
        static_cast<sdbusplus::bus::bus&>(*conn),
        "type='signal',member='PropertiesChanged', "
        "interface='org.freedesktop.DBus.Properties', "
        "sender='xyz.openbmc_project.State.Chassis', "
        "arg0namespace='xyz.openbmc_project.State.Host'",
        [&server, &conn](sdbusplus::message::message& message) {
            std::string intfName;
            std::map<std::string, std::variant<std::string>> properties;
            message.read(intfName, properties);

            const auto it = properties.find("CurrentHostState");
            if (it != properties.end())
            {
                const std::string* state =
                    std::get_if<std::string>(&it->second);
                if (state != nullptr)
                {
                    if ((*state ==
                         "xyz.openbmc_project.State.Host.HostState.Running") &&
                        (!stateTimerRunning))
                    {
                        stateTimerRunning = true;
                        monitorPlatformStateChange(server, conn);
                    }
                    else if (((*state == "xyz.openbmc_project.State.Host."
                                         "HostState.Off") ||
                              (*state == "xyz.openbmc_project.State.Host."
                                         "HostState.Quiesced")) &&
                             (stateTimerRunning))
                    {
                        stateTimer->cancel();
                        checkAndLogEvents();
                        stateTimerRunning = false;
                    }
                }

                // Update the D-Bus properties when host state changes.
                updateDbusPropertiesCache();
            }
        });

    // Capture the OS state change and stop monitor timer
    // if OS boots completly or becomes Inactive.
    // start timer in other cases to mnitor states.
    static auto matchOsState = sdbusplus::bus::match::match(
        static_cast<sdbusplus::bus::bus&>(*conn),
        "type='signal',member='PropertiesChanged', "
        "interface='org.freedesktop.DBus.Properties', "
        "sender='xyz.openbmc_project.State.Chassis', "
        "arg0namespace='xyz.openbmc_project.State.OperatingSystem.Status'",
        [&server, &conn](sdbusplus::message::message& message) {
            std::string intfName;
            std::map<std::string, std::variant<std::string>> properties;
            message.read(intfName, properties);

            const auto it = properties.find("OperatingSystemState");
            if (it != properties.end())
            {
                const std::string* state =
                    std::get_if<std::string>(&it->second);
                if (state != nullptr)
                {
                    if (((*state == "BootComplete") ||
                         (*state == "Inactive")) &&
                        (stateTimerRunning))
                    {
                        stateTimer->cancel();
                        checkAndLogEvents();
                        stateTimerRunning = false;
                    }
                    else if (!stateTimerRunning)
                    {
                        stateTimerRunning = true;
                        monitorPlatformStateChange(server, conn);
                    }
                }
            }
        });

    // First time, check and log events if any.
    checkAndLogEvents();
}

int main()
{
    // setup connection to dbus
    boost::asio::io_service io;
    auto conn = std::make_shared<sdbusplus::asio::connection>(io);
    stateTimer = std::make_unique<boost::asio::steady_timer>(io);
    initTimer = std::make_unique<boost::asio::steady_timer>(io);
    auto server = sdbusplus::asio::object_server(conn, true);
    monitorSignals(server, conn);

    auto rootInterface = server.add_interface("/xyz/openbmc_project/pfr", "");
    rootInterface->initialize();
    server.add_manager("/xyz/openbmc_project/pfr");

    // Create PFR attributes object and interface
    pfrConfigObject = std::make_unique<intel::pfr::PfrConfig>(server, conn);

    // Create Software objects using Versions interface
    for (const auto& entry : verComponentList)
    {
        pfrVersionObjects.emplace_back(std::make_unique<intel::pfr::PfrVersion>(
            server, conn, std::get<0>(entry), std::get<1>(entry),
            std::get<2>(entry)));
    }

    conn->request_name("xyz.openbmc_project.PFR.Manager");
    phosphor::logging::log<phosphor::logging::level::INFO>(
        "Intel PFR service started successfully");
    io.run();

    return 0;
}