blob: b18f6c7033cd95cd9b091cd45df90ec1b8606464 [file] [log] [blame]
description: >
This defines an ethernet interface.
An object implementing this interface must implement
xyz.openbmc_project.State.OperationalStatus.
properties:
- name: InterfaceName
type: string
description: >
Name of the ethernet interface.
- name: Speed
type: uint32
description: >
Current speed of the ethernet interface, in Mbps.
- name: AutoNeg
type: boolean
description: >
This indicates if the speed and duplex are automatically negotiated
and configured on this ethernet interface.
- name: DomainName
type: array[string]
description: >
Domain names of the ethernet interface.
- name: DHCPEnabled
type: boolean
description: >
Address mode of the ethernet interface.
- name: Nameservers
type: array[string]
description: >
DNS servers that are currently in use on this interface.
errors:
- xyz::openbmc_project.Common.Error.NotAllowed
- name: StaticNameServers
type: array[string]
description: >
A statically defined set of DNS server IP addresses to be used when
DHCP provisioning is not enabled for name server configuration. As
an implementation option this may also be used in addition to DHCP
provided addresses, or in cases where the DHCP server provides no DNS
assigments.
errors:
- xyz.openbmc_project.Common.Error.InvalidArgument
- name: NTPServers
type: array[string]
description: >
This property describes the NTP Servers on the interface.
Implementation of this Dbus-interface is required to implement this property.
This property supports read/write operation.
Configure the NTP servers on the system during write operation.
- name: LinkLocalAutoConf
type: enum[self.LinkLocalConf]
description: >
This indicates link local auto configuration on this ethernet
interface and configured on this ethernet interface.
- name: IPv6AcceptRA
type: boolean
description: >
Boolean for accepting router advertisements in IPv6
- name: NICEnabled
type: boolean
description: >
Boolean for to enabling or disabling the ethernet port
- name: LinkUp
type: boolean
flags:
- const
description: >
This property reports the link status for the NIC. The read-only
boolean value is TRUE when the network cable is inserted, or there
is a carrier signal. It is FALSE when the cable is unplugged, or the
carrier signal is missing.
enumerations:
- name: LinkLocalConf
description: >
Possible link local auto configuration values.
values:
- name: fallback
- name: both
- name: v4
- name: v6
- name: none