Ratan Gupta | 66bc4eb | 2017-03-28 17:14:49 +0530 | [diff] [blame] | 1 | description: > |
| 2 | This defines network bonding parameters. |
| 3 | |
| 4 | # TODO Fix it through https://github.com/openbmc/openbmc/issues/1438 |
| 5 | # creatable: true |
| 6 | |
| 7 | properties: |
| 8 | - name: InterfaceName |
| 9 | type: string |
| 10 | description: > |
| 11 | Name of the interface. |
| 12 | - name: BondedInterfaces |
| 13 | type: array[string] |
| 14 | description: > |
| 15 | Interfaces which needs to be bonded. |
| 16 | - name: Mode |
| 17 | type: enum[self.BondingMode] |
| 18 | description: > |
| 19 | Network interface bonding modes. |
| 20 | default: RoundRobin |
| 21 | - name: TransmitHashPolicy |
| 22 | type: enum[self.HashPolicy] |
| 23 | description: |
| 24 | Selects the transmit hash policy to use for slave selection in |
| 25 | balance-xor, 802.3ad, and tlb modes. |
| 26 | default: Layer2 |
| 27 | |
| 28 | enumerations: |
| 29 | - name: BondingMode |
| 30 | description: > |
| 31 | Possible bonding mode types. |
| 32 | values: |
Patrick Williams | 8da396c | 2022-03-14 14:21:02 -0500 | [diff] [blame] | 33 | - name: RoundRobin |
| 34 | description: > |
| 35 | It is the default mode,in this mode system transmits packets in |
| 36 | sequential order from the first available slave through the last. |
| 37 | - name: ActiveBackup |
| 38 | description: > |
| 39 | In this mode, only one slave in the bond is active. |
| 40 | The other one will become active, only when the active slave fails. |
| 41 | - name: XOR |
| 42 | description: > |
| 43 | Transmit based on selectable hashing algorithm. |
| 44 | The default policy is a simple source+destination MAC address algorithm. |
| 45 | - name: Broadcast |
| 46 | description: > |
| 47 | Transmits everything on all slave interfaces. |
| 48 | - name: Dynamic |
| 49 | description: > |
| 50 | IEEE 802.3ad Dynamic link aggregation. |
| 51 | - name: TLB |
| 52 | description: > |
| 53 | The outgoing traffic is distributed according to the current load on each slave. |
| 54 | - name: ALB |
| 55 | description: > |
| 56 | Incoming/outgoing traffic is distributed according to the current load on each slave. |
Ratan Gupta | 66bc4eb | 2017-03-28 17:14:49 +0530 | [diff] [blame] | 57 | |
| 58 | - name: HashPolicy |
| 59 | description: > |
| 60 | Possible policy types. |
| 61 | values: |
Patrick Williams | 8da396c | 2022-03-14 14:21:02 -0500 | [diff] [blame] | 62 | - name: Layer2 |
| 63 | description: > |
| 64 | This policy uses XOR of hardware MAC addresses and packet type ID |
| 65 | field to generate the hash. |
| 66 | - name: Layer2Plus3 |
| 67 | description: > |
| 68 | This policy uses a combination of layer2 and layer3 |
| 69 | protocol information to generate the hash. |
| 70 | - name: Layer3Plus4 |
| 71 | description: > |
| 72 | This policy uses upper layer protocol information, |
| 73 | when available, to generate the hash. |
| 74 | - name: Encap2Plus3 |
| 75 | description: > |
| 76 | This policy uses the same formula as layer2+3 but it |
| 77 | relies on skb_flow_dissect to obtain the header fields |
| 78 | which might result in the use of inner headers if an |
| 79 | encapsulation protocol is used. |
| 80 | - name: Encap3Plus4 |
| 81 | description: > |
| 82 | This policy uses the same formula as layer3+4 but it |
| 83 | relies on skb_flow_dissect to obtain the header fields |
| 84 | which might result in the use of inner headers if an |
| 85 | encapsulation protocol is used. |